Synthesis and antitubercular evaluation of amidoalkyl dibenzofuranols and 1H-benzo[2,3]benzofuro[4,5-e][1,3]oxazin-3(2H)-ones

A new class of amidoalkyl dibenzofuranols and 1H-benzo[2,3]benzofuro[4,5-e][1,3]oxazin-3(2H)-ones was synthesized in very good yields through polyphosphoric acid supported on silica (PPA-SiO₂) catalyzed one-pot three component condensation of 2-dibenzofuranol; aromatic aldehydes and acetamide or benzamide or urea under solvent free conditions. At 125 °C the reaction led to the formation of amidoalkyl dibenzofuranols 5a-k where as at 160 °C cyclization take place to give oxazin-3(2H)-one analogues 6a-e. Screening all the 16 compounds for in vitro antimycobacterial activity against Mycobacterium tuberculosis H37Rv (MTB) resulted 1-((4-chlorophenyl)(2-hydroxydibenzo[b,d]furanyl)methyl)urea 5h; 1-((4-bromophenyl)(2-hydroxydibenzo[b,d]furanyl)methyl)urea 5i; 1-phenyl-1H-benzo[2,3]benzo furo[4,5-e][1,3]oxazin-3(2H)-one 6a (MIC 3.13 μg/mL) and 1-(4-chlorophenyl)-1H-benzo[2,3]benzofuro[4,5-e][1,3]oxazin-3(2H)-one 6b; 1-(4-bromophenyl)-1H-benzo[2,3]benzofuro [4,5-e][1,3]oxazin-3(2H)-one 6c (MIC 1.56 μg/mL) as most active antitubercular agents.     

Potential antimicrobial agents from triazole-functionalized 2H-benzo[b][1,4]oxazin-3(4H)-ones

A series of substituted triazole functionalized 2H-benzo[b][1,4]oxazin-3(4H)-ones were synthesized by employing click chemistry and further characterized based on ¹H NMR, ¹³C NMR, IR and mass spectral studies. All the synthesized derivatives were screened for their in vitro antimicrobial activities. Further, molecular docking studies were accomplished to explore the binding interactions between 1,2,3-triazol-4-yl-2H-benzo[b][1,4]oxazin-3(4H)-one and the active site of Staphylococcus aureus (CrtM) dehydrosqualene synthase (PDB ID: 2ZCS). These docking studies revealed that the synthesized derivatives showed high binding energies and strong H-bond interactions with the dehydrosqualene synthase validating the observed antimicrobial activity data. Based on antimicrobial activity and docking studies, the compounds 9c, 9d and 9e were identified as promising antimicrobial leads.     

Mononuclear and tetranuclear palladacycles with terdentate [C,N,N] and [C,N,O] Schiff base ligands. C-H versus C-Br activation reactions

Reaction of the Schiff base ligands 2-Br-4,5-(OCH₂O)C₆H₂C(H)NCH₂CH₂NMe₂ (a) and 4,5-(OCH₂CH₂)C₆H₃C(H)NCH₂CH₂NMe₂ (b) with Pd(OAc)₂ or K₂[PdCl₄] leads to the mononuclear cyclometallated compounds [Pd{2-Br-4,5-(OCH₂O)C₆HC(H)NCH₂CH₂NMe₂-C6,N,N}(OCOMe)] (1a) and [Pd{4,5-(OCH₂CH₂)C₆H₂C(H)NCH₂CH₂NMe₂-C6,N,N}(Cl)] (1b), derived from C-H activation at the C6 carbon. Treatment of a with Pd₂(dba)₃ gave [Pd{4-5-(OCH₂O)C₆H₂C(H)NCH₂CH₂NMe₂-C2,N,N}(Br)] (2a), via C-Br activation.The metathesis reaction of 1a with aqueous sodium chloride gave [Pd{2-Br-4,5-(OCH₂O)C₆HC(H)NCH₂CH₂NMe₂-C6,N,N}(Cl)] (3a), with exchange of the acetate group by a chloride ligand. Treatment of the cyclometallated monomers 1a-3a with PPh₃ in a 1:1 molar ratio yielded the mononuclear complexes [Pd{2-Br-4,5-(OCH₂O)C₆HC(H)NCH₂CH₂NMe₂-C6,N}(L)(PPh₃)] (L: OAc, 4a; Cl, 5a) and [Pd{4-5-(OCH₂O)C₆H₂C(H)NCH₂CH₂NMe₂-C2,N}(Br)(PPh₃)] (6a), with Pd-NMe₂ bond cleavage. However, treatment of a solution of 3a or 2a with silver trifluoromethanesulfonate, followed by reaction with PPh₃ in acetone yielded the cyclometallated complexes [Pd{2-Br-4,5-(OCH₂O)C₆HC(H)NCH₂CH₂NMe₂-C6,N,N}(PPh₃)][CF₃SO₃] (7a) and [Pd{4-5-(OCH₂O)C₆H₂C(H)NCH₂CH₂NMe₂-C2,N,N}(PPh₃)][CF₃SO₃] (8a), respectively, where the Pd-NMe₂ bond was retained.The reaction of the ligands 2-Br-4,5-(OCH₂O)C₆H₂C(H)N(2′-OH-5′-^tBuC₆H₃) (c) and 4,5-(OCH₂CH₂)C₆H₃C(H)N(2′-OH-5′-^tBuC₆H₃) (d) with Pd(OAc)₂ gave the tetranuclear complexes [Pd{2-Br-4,5-(OCH₂O)C₆HC(H)N(2′-O-5′-^tBuC₆H₃)-C6,N,O}]₄ (1c) and [Pd{4,5-(OCH₂CH₂)C₆H₂C(H)N(2′-O-5′-^tBuC₆H₃)-C6,N,O}]₄ (1d), respectively. Treatment of 1c with PPh₃ in 1:4 molar ratio, gave the mononuclear species [Pd{2-Br-4,5-(OCH₂O)C₆HC(H)N(2′-(O)-5′-^tBuC₆H₃)-C6,N,O}(PPh₃)] (2c) with opening of the polynuclear structure after P-O_bridging bond cleavage.The structure of compounds 2a, 1c and 1d has been determined by X-ray diffraction analysis.     

Pyridine and phosphine reactions with [CPh3][B(C6F5)4]

Trityl borate salts [4-RPyCPh₃][B(C₆F₅)₄] (R = H 1, ^tBu 2, Et 3, NMe₂4) and [R₃PCPh₃][B(C₆F₅)₄] (R = Me 5, ⁿBu 6, Ph[1] 7, p-MeC₆H₄8) are readily prepared via equimolar reaction of the appropriate pyridine or phosphine and trityl borate [CPh₃][B(C₆F₅)₄]. The analogous reactions of PⁱPr₃ affords the product [(p-ⁱPr₃P-C₆H₄)Ph₂CH][B(C₆F₅)₄] (9) while the corresponding reactions of Cy₃P and ^tBu₃P gave the cyclohexadienyl derivatives [(p-R₃PC₆H₅)CPh₂][B(C₆F₅)₄] (R = Cy 10, ^tBu 11). X-ray structures of 5 and 9 are reported.     

Calix[4]arene supported group 5 imido complexes

The reaction of imidoyl chlorides [V(NR)Cl₃] (R = Ph 1, Tol 2, tBu 3) and calix[4]arene methyl ether H₃Mecalix unexpectedly leads to the formation of the structurally characterized vanadium (IV) complex [VCl(Mecalix)] (4). Calix[4]arene methyl ether stabilized imido complexes of the type [V(NR)(Mecalix)] (R = Ph 7, Tol 8, tBu 9) were afforded from the reaction of [V(NR)Cl₃] (R = Ph 1, Tol 2, tBu 3) and the tris(lithium) or tris(sodium) salt of the calix[4]arene ether. The lithium salt [{Li₃(Mecalix)}₂] (5) is a dimer in the solid state, in which two monomeric trianions are bridged by lithium cations. Imido complexes [M(NR)(Mecalix)] (M = Nb: R = tBu, 12, R = Tol 13, R = Mes 14, R = Dipp 15; M = Ta: R = tBu 16, R = Tol 17) (Tol = 4-C₆H₄Me, Mes = 2,6-C₆H₃Me₂; Dipp = 2,6-C₆H₃iPr₂) have been prepared from structurally characterized [NbCl₂(Mecalix)] (10) and previously known [TaCl₂(Mecalix)] (11) via reaction with two equivalents of the appropriately metallated (Li, K) primary amine. The molecular structures of 13 and 15 confirm the mononuclear nature of these complexes.     

Synthesis and complexation of tetrakis(diphenylphosphinomethyl)calix[4]arene adopting the 1,3-alternate conformation

Novel upper-rim modified tetraphosphinocalix[4]arenes (5a-b) adopting 1,3-alternate conformation have been synthesized. Reaction of 5,11,17,23-tetrachloromethyl-25,26,27,28-tetrahydroxycalix[4]arene (1) with Ph₂POEt gave 5,11,17,23-tetrakis(diphenylphosphinoylmethyl)-25,26,27,28-tetrahydroxycalix[4]arene (2). Tetra-O-substitution of 2 with n-propyl iodide or benzyl bromide in the presence of K₂CO₃ carried out to afford 5,11,17,23-tetrakis(diphenylphosphinoylmethyl)-25,26,27,28-tetrapropoxy-(3a) or -benzyloxycalix[4]arene (3b), whereas di-O-substituted calix[4]arene, 5,11,17,23-tetrakis(diphenylphosphinoylmethyl)-25,27-dipropoxy-26,28-dihydroxycalix[4]arene (4), was obtained exclusively when Na₂CO₃ was used as base. Reduction of 3a-b with PhSiHCl₂ afforded 5,11,17,23-tetrakis(diphosphinomethyl)-25,26,27,28-tetrapropoxy-(5a) and -tetrabenzyloxycalix[4]arene (5b). ¹H and ¹³C NMR analysis reveals that the phosphines (5a-b) and the tetra-O-substituted phosphine oxides (3a-b) adopt 1,3-alternate conformation, while the parent tetrahydroxy-(2) and the di-O-propylated phosphine oxide (4) adopt cone-conformation. The X-ray structure indicates that the calix[4]arene moieties in 4 a pinched-cone conformation in solid state. Complexation of the phosphine ligand (5a) with [RuCl₂(p-cymene)]₂ affords the tetranuclear complexes, [{RuCl₂(p-cymene)}₂ · 5a] (6), as 1,3-alternate conformer.     

Synthesis and characterization of amine complexes of the cyclopentadienyliron dicarbonyl complex cation, [Cp(CO)2Fe]

The organometallic Lewis acid, [CpFe(CO)₂]⁺ (Cp = η⁵-C₅H₅) reacts with excess dry diethyl ether at low temperatures to form the labile complex [CpFe(CO)₂(Et₂O)]⁺[BF₄]⁻ (1) which is stable at low temperatures and has been fully characterized. Complex 1 in turn reacts with 1-aminoalkanes and α,ω-diaminoalkanes to form new complexes of the type [CpFe(CO)₂NH₂(CH₂)_nCH₃]BF₄ (n = 2-6) (2) and [{CpFe(CO)₂}₂μ-(NH₂(CH₂)_nNH₂)](BF₄)₂ (n = 2-4) (3), respectively. These complexes have been fully characterized and the mass spectral patterns of complexes 2 are reported. The structures of compounds 2a (n = 2) and 2b (n = 3) have been confirmed by single crystal X-ray crystallography. The single crystal X-ray diffraction data show that complex 2a, [CpFe(CO)₂NH₂(CH₂)₂CH₃]BF₄, crystallizes in a triclinic space group while 2b, [CpFe(CO)₂NH₂(CH₂)₃CH₃]BF₄, crystallizes in an orthorhombic Pca2₁ space group with two crystallographically independent molecular cations in the asymmetric unit. Furthermore, the reaction of 1 with 1-alkenes gives the η²-alkene complexes in high yield.     

Synthesis and characterisation of a series of 1,2-phenylenedioxoborylcyclopentadienyl-metal complexes [Ti(IV), Zr(IV), Hf(IV), La(III), Ce(III), Yb(III), Sn(II) and Fe(II)]

The preparation of a series of 1,2-phenylenedioxoborylcyclopentadienyl-metal complexes is described. These are of formula [M{η⁵-C₅H₄(BX)}Cl₃] [M = Ti and X = CAT (2a), CAT^t (2b) or CAT^tt (2c); X = CAT^tt and M = Zr (4a) or Hf (4b)], [M{η⁵-C₅H₄(BX)}₂Cl₂] [M = Zr, X = CAT (3a) or CAT^t (3c); or M = Hf, X = CAT (3b) or CAT^t (3d)], [M{(μ-η⁵-C₅H₃BCAT)₂ SiMe₂}Cl₂] [M = Zr (5a) or Hf (5b)], [M{η⁵-C₅H₃(BCAT)₂}Cl₃] [M = Zr (6a) or Hf (6b)], [M{η⁵-C₅H₄BCAT}₃(THF)] [M = La (7a), Ce (7b) or Yb (7c)], [Sn{η⁵-C₅ H₄(BCAT^t)}Cl](8) and [Fe{η⁵-C₅H₄(BCAT^t)}₂] (9). The abbreviations refer to BO₂C₆H₄-1,2 (BCAT) and the 4-Bu^t (BCAT^t) and the (BCAT^tt) analogues. The compounds 2a-9 have been characterised by microanalysis, multinuclear NMR and mass spectra. The single crystal X-ray structure of the lanthanum compound 7a is presented.     

Reactions of hybrid organotellurium ligands 1-(4-methoxyphenyl telluro)-2-[3-(6-methyl-2-pyridyl)propoxy]ethane (L) and 1-ethylthio-2-[2-thienyltelluro]ethane (L) with mercury (II) bromide: formation of complexes and their decomposition

Two tellurium ligands 1-(4-methoxyphenyltelluro)-2-[3-(6-methyl-2-pyridyl)propoxy]ethane (L¹) and 1-ethylthio-2-[2-thienyltelluro]ethane (L²) have been synthesized by reacting nucleophiles [4-MeO-C₆H₄Te⁻] and [C₄H₃S-2-Te⁻] with 2-[3-(6-methyl-2-pyridyl)propoxy]ethylchloride and chloroethyl ethyl sulfide, respectively. Both the ligands react with HgBr₂ resulting in complexes of stoichiometry [HgBr₂ · L¹/L²] (1/4), which show characteristic NMR (¹H and ¹³C{¹H}). On crystallization of 1 from acetone-hexane (2:1) mixture, the cleavage of L¹ occurs resulting in 4-MeOC₆H₄HgBr (2) and [RTe⁺→HgBr₂]Br⁻ (3) (where R = -CH₂CH₂OCH₂CH₂CH₂-(2-(6-CH₃-C₅H₃N))). The 2 is characterized by X-ray diffraction on its single crystal. It is a linear molecule and is the first such system which is fully characterized structurally. The Hg-C and Hg-Br bond lengths are 2.085(6) and2.4700(7) Å. The distance of four bromine atoms (3.4041(7)-3.546(7) Å) around Hg (cis to C) is greater than the sum of van der Waal’s radii 3.30 Å. This mercury promoted cleavage is observed for an acyclic ligand of RArTe type for the first time and is unique, as there appears to be no strong intramolecular interaction to stabilize the cleavage products. The 4 on crystallization shows the cleavage of organotellurium ligand L² and formation of a unique complex [(EtS(CH₂)₂SEt)HgBr(μ-Br)Hg(Br)(μ-Br)₂Hg(Br)(μ-Br)BrHg(EtS(CH₂)₂SEt)] · 2HgBr₂ (5), which has been characterized by single crystal structure determination and ¹H and ¹³C{¹H} NMR spectra. The elemental tellurium and [C₄H₃SCH₂]₂ are the other products of dissociation as identified by NMR (proton and carbon-13). The cleavage appears to be without any transmetalation and probably first of its kind. The centrosymmetric structure of 5 is unique as it has [HgBr₃]⁻ unit, one Hg in distorted tetrahedral geometry and one in pseudo-trigonal bipyramidal one. The molecule of 5 may also be described as having [(EtSCH₂CH₂SEt)HgBr]⁺ [HgBr₃]⁻ units, which dimerize and co-crystallize with two HgBr₂ moieties. There are very weak Hg?Br interactions between co-crystallized HgBr₂ units and rest of the molecule. [Hg(3)-Br(1)/Hg(3)-Br(4) = 3.148(1)/3.216(1) Å]. The bridging Hg?Br distances, Hg(2)-Br(4)′, Hg(2)′-Br(4) and Hg(1)-Br(2), are from 2.914(1) to 3.008(1) Å.     

[S2], [S3], and [N3] coordination modes of hydrotris(thioxotriazolyl)borato. Zinc, nickel, cobalt, and bismuth complexes

The ligand hydrotris(1,4-dihydro-3-methyl-4-phenyl-5-thioxo-1,2,4-triazolyl)borato (Tr^Ph,Me) was synthetized as natrium salt and the complexes [Zn(Tr^Ph,Me)₂] · 7.5H₂O · 1.5CH₃CN (2a), [Zn(Tr^Ph,Me)₂] · 8DMF (2b), [Co(Tr^Ph,Me)₂] · 8DMF (3a), [Ni(Tr^Ph,Me)₂] · H₂O · 6DMSO (4a), [Bi(Tr^Ph,Me)₂]NO₃ (5), have been isolated and structurally characterized by X-ray diffraction. In the zinc derivatives the ligand adopts different denticity and coordination modes, η² and [S₂] for 2a and η³ and [N₃] for 2b, depending on the crystallization solvent, giving rise to tetrahedral and octahedral geometry, respectively. In the octahedral cobalt and nickel complexes the ligand is η³ and [N₃] coordinated whereas in the bismuth complex the η³ and [S₃] coordination is exhibited.     

Synthesis, DNA-binding and photocleavage studies of ruthenium complexes [Ru(bpy)2(mitatp)] and [Ru(bpy)2(nitatp)]

Two new ruthenium complexes [Ru(bpy)₂(mitatp)](ClO₄)₂1 and [Ru(bpy)₂(nitatp)](ClO₄)₂2 (bpy = 2,2′-bipyridine, mitatp = 5-methoxy-isatino[1,2-b]-1,4,8,9-tetraazatriphenylene, nitatp = 5-nitro-isatino[1,2-b]-1,4,8,9-tetraazatriphenylene) have been synthesized and characterized by elemental analysis, ¹H NMR, mass spectrometry and cyclic voltammetry. Spectroscopic and viscosity measurements proved that the two Ru(II) complexes intercalate DNA with larger binding constants than that of [Ru(bpy)₂(dppz)]²⁺ (dppz = dipyrido[3,2-a:2′,3′-c]phenazine) and possess the excited lifetime of microsecond scale upon binding to DNA. Both complexes can efficiently photocleave pBR322 DNA in vitro under irradiation. Singlet oxygen (¹O₂) was proved to contribute to the DNA photocleavage process, the ¹O₂ quantum yields was determined to be 0.43 and 0.36 for 1 and 2, respectively. Moreover, a photoinduced electron transfer mechanism was also found to be involved in the DNA cleavage process.     

Synthesis, spectroscopical characterization and the biological activity in vitro of new platinum(II) complexes with imidazo[1,5-a]-1,3,5-triazine derivatives and dimethylsulfoxide

A series of platinum(II) complexes with 6,8-dimethylimidazo[1,5-a]-1,3,5-triazin-4(3H)-one (6,8-DiMe-4-O-IMT) (I) and 6,8-dimethyl-2-thioxo-2,3-dihydroimidazo[1,5-a]-1,3,5-triazin-4(1H)-one (6,8-DiMe-4-O-2-S-IMT) (II) of formula trans-[PtCl₂(dmso)(6,8-DiMe-4-O-IMT)] (1a) and trans-[PtCl₂(dmso)(6,8-DiMe-4-O-2-S-IMT)] (2a) have been prepared and characterized with ¹H, ¹³C, ¹⁵N, ¹⁹⁵Pt NMR and IR. Significant ¹⁵N NMR upfield coordination shifts (81-96 ppm) of N(7) atom indicate this nitrogen atom as a coordination site. The multinuclear NMR and IR spectra indicate the square planar geometry with N(7) bonded heterocycles, S-bonded dimethylsulfoxide and two trans chloride anions. The platinum(II) complexes were tested for their antiproliferative activity in vitro against the cells of four human cell lines: SW707 rectal adenocarcinoma, A549 non-small cell lung carcinoma, T47D breast cancer and HCV29T bladder cancer. The activity of (1a, 2a) was lower than that of cisplatin.     

Synthesis of benzene ruthenium triazolato complexes by [3+2] cycloaddition reactions of activated alkynes and fumaronitrile to benzene ruthenium azido complexes

The dinuclear complex [(η⁶-C₆H₆)Ru(μ-N₃)Cl]₂ (1) is obtained by the reaction of [(η⁶-C₆H₆)RuCl₂]₂ with sodium azide in ethanol. The benzene ruthenium β-diketonato complexes of the general formula [(η⁶-C₆H₆)Ru(L∩L)Cl] {L∩L = O,O′-acac (2); O,O′-bzac (3); O,O′-dbzm (4)} are obtained in methanol by the reaction of [(η⁶-C₆H₆)RuCl₂]₂ with the corresponding β-diketonates. These complexes further react with sodium azide in ethanol to yield complexes of the type [(η⁶-C₆H₆)Ru(L∩L)N₃] [L∩L = O,O′-acac (5); L∩L = O,O′-bzac (6); L∩L = O,O′-dbzm (7)]. The complexes 5-7 are obtained as well by treating 1 with sodium salts of β-diketonates. These neutral benzene ruthenium azido complexes undergo [3+2] dipolar cycloaddition reaction with activated alkynes (MeO₂CCCCO₂Me, EtO₂CCCCO₂Et) or fumaronitrile (NCHCCHCN) to yield the corresponding benzene ruthenium triazolato complexes; [(η⁶-C₆H₆)Ru(O,O′-acac){N₃C₂(CO₂Me)₂}] (8), [(η⁶-C₆H₆)Ru(O,O′-acac){N₃C₂(CO₂Et)₂}] (9), [(η⁶-C₆H₆)Ru(O,O′-acac){N₃C₂HCN}] (10), [(η⁶-C₆H₆)Ru(O,O′-bzac){N₃C₂HCN}] (11) and [(η⁶-C₆H₆)Ru(O,O′-dbzm){N₃C₂HCN}] (12). These complexes are fully characterized on the basis of microanalyses, FT-IR and FT-NMR spectroscopy. The molecular structure of [(η⁶-C₆H₆)Ru(O,O′- acac){N₃C₂(CO₂C₂H₅)₂}] (9) is confirmed by single crystal X-ray diffraction study.     

Insertion reactions of organic anhydrides and the Cu(I) alkoxide [CuOBu]

The synthesis and structural characterization of the copper salts [Cu₈(benzoate)₈(THF)₆] (1), [Cu₂{(CO₂)₂C₆H₂(Boc)₂}dppm₂]₂ (2) and [Cu₂{(CO₂)₂C₁₀H₄(Boc)₂}dppm₂]₂ (3) [Boc = tert-butoxycarbonyl, dppm = 1,2-bis(diphenylphosphino)methane] prove that cyclic organic anhydrides and dianhydrides readily insert into the Cu-O bond of [CuO^tBu] forming carboxylate ligands with ester functionalities in the ligand periphery. [Mn₃(o-Boc-benzoate)₆(DME)₂] (4) (DME = 1,2-dimethoxyethane) was synthesized by the metathesis reaction of [Cu(I)(o-Boc-benzoate)] with MnCl₂.     

New ruthenium(II) precursors with the tetradentate sulfur macrocycles tetrathiacyclododecane ([12]aneS4) and tetrathiacyclohexadecane ([16]aneS4) for the construction of metal-mediated supramolecular assemblies

The preparation and structural characterization of several new Ru(II) complexes in which four coordination positions are occupied by the sulfur atoms of a macrocycle, either 1,4,7,10-tetrathiacyclododecane ([12]aneS4) or 1,5,9,13-tetrathiacyclohexadecane ([16]aneS4), and the two others by relatively labile ligands (Cl⁻, , H₂O, dmso-S), are described:cis-[Ru([12]aneS4)(dmso-S)(H₂O)](CF₃SO₃)₂ (2a), cis-[Ru([12]aneS4)(dmso-S)(ONO₂)](NO₃) (2b), cis-[Ru([16]aneS4)Cl₂] (4), and trans-[Ru([16]aneS4)(dmso-S)(H₂O)](CF₃SO₃)₂ (5).The complexes of the larger [16]aneS4 macrocycle have a flexible coordination geometry, either cis or trans, that makes them unsuited for being used as precursors in metal-driven self-assembly processes.On the contrary, the [12]aneS4 complexes cis-[Ru([12]aneS4)(dmso-S)Cl]Cl (1) and, above all, its chlorido free derivatives cis-[Ru([12]aneS4)(dmso-S)(H₂O)](CF₃SO₃)₂ (2a) and cis-[Ru([12]aneS4)(dmso-S)(ONO₂)](NO₃) (2b) are potential precursors of the geometrically stable 90° bis-acceptor fragment cis-[Ru([12]aneS4)]²⁺.Preliminary results of their reactivity towards the linear linker pyrazine (pyz) showed that the nature of the isolated product depends on that of the counter-anion.When treated with pyz 2b afforded the dinuclear complex [{Ru([12]aneS4)(ONO₂)}₂(μ-pyz)](NO₃)₂ (8), while 2a gave the molecular triangle [{cis-Ru([12]aneS4)(μ-pyz)}₃](CF₃SO₃)₆ (9), both in low yields.The X-ray structures of compounds 2a, 2b, 4, 5, [{Ru([12]aneS4)Cl}₂(μ-pyz)]Cl₂ (7), 9, and of the sandwich complex[Ru([12]aneS3-S)₂](CF₃SO₃)₂ (3), in which only three sulfur atoms of each macrocycle are bound to ruthenium, are also described.     

Synthesis and structural analysis of calix[4]arene-supported iron(III) complexes

The paper describes the reactivity of calix[4]arene dialkyl- or -silylethers H₂R₂calix, R=Me (1), Bz (2), or SiMe₃ (3) (p-tert.butyl-calix[4]arene=H₄calix), towards the iron(III) complex [FeCl(NSiMe₃)₂(thf)] 4. Bis(silylation) of H₄calix was achieved using a mixture of NEt₃ and Me₃SiCl as silylating agent, which is probably the most convenient and cheapest way for the preparation of H₂(Me₃Si)₂calix 3. [FeCl(N{SiMe₃}₂)₂(thf)] 4 has been obtained from the reaction of [FeCl₃] and commercially available K[N(SiMe₃)₂] in THF. The reactions of 4 with H₂Me₂calix and H₂Bz₂calix afford mononuclear iron(III) chloro compounds [FeCl(R₂calix)] 5 (R=Me) and 6 (R=Bz). The usage of calix[4]arene silyl ether 3 leads to a dinuclear complex [Fe₂({Me₃Si}calix)₂] 7, presumably under Me₃SiCl cleavage of a mononuclear calixarene iron(III) chloro complex. The calix[4]arene ether stabilized iron(III) chloro complexes are susceptible to nucleophilic substitution reactions, as exemplified by the reaction of 5 with sodium azide yielding an azido complex [Fe(N₃)(Me₂calix)] 8. The molecular structures of 4, 5, 6, 7, and 8 in the solid state have been determined by X-ray diffraction.     

Dinitrosyl iron complexes [E5Fe(NO)2] (E = S, Se): A precursor of Roussin’s black salt [Fe4E3(NO)7]

[PPN][Se₅Fe(NO)₂] (1) and [K-18-crown-6-ether][S₅Fe(NO)₂] (2′) were synthesized and characterized by IR, UV-Vis, EPR spectroscopy, magnetic susceptibility, and X-ray structure. [PPN][Se₅Fe(NO)₂] easily undergoes ligand exchange with S₈ and (RS)₂ (R = C₇H₄SN (5), o-C₆H₄NHCOCH₃ (6), C₄H₃S (7)) to form [PPN][S₅Fe(NO)₂] and [PPN][(SR)₂Fe(NO)₂]. The reaction displays that [E₅Fe(NO)₂]⁻ (E = Se (3), S (4)) facilely converts to [Fe₄E₃(NO)₇]⁻ by adding acid HBF₄ or oxidant [Cp₂Fe][BF₄] in THF, respectively. Obviously, complexes 1 and 2′ serve as the precursors of the Roussin’s black salts 3 and 4. The electronic structure of {Fe(NO)₂}⁹ core of [Se₅Fe(NO)₂]⁻ is best described as a dynamic resonance hybrid of {Fe⁺¹(NO)₂}⁹ and {Fe⁻¹(NO⁺)₂}⁹ modulated by the coordinated ligands. The findings, EPR signal of g = 2.064 for 1 at 298 K, implicate that the low-molecular-weight DNICs and protein-bound DNICs may not exist with selenocysteine residues of proteins as ligands, since the existence of protein-bound DNICs and low-molecular-weight DNICs in vitro has been characterized with a characteristic EPR signal at g = 2.03. In addition, complex 2′ treated human erythroleukemia K562 cancer cells exposed to UV-A light greatly decreased the percentage survival of the cell cultures.     

Functional mimics of catechol oxidase by mononuclear copper complexes of sterically demanding [NNO] ligands

Several mononuclear copper complexes 1(a-b) and 2(a-b) supported over sterically demanding [NNO] ligands namely, N-(aryl)-2-[(pyridin-2-ylmethyl)amino]acetamide [aryl = 2,6-diethylphenyl (1) and mesityl (2)], exhibit catecholase-like activity in performing the aerial oxidation of 3,5-di-t-butylcatehol (3,5-DTBC) to 3,5-di-t-butyl-catequinone (3,5-DTBQ) under ambient conditions. The 1(a-b) and 2(a-b) complexes were directly synthesized from the reaction of the respective ligands 1-2 with CuX₂·nH₂O (X = Cl, NO₃, n = 2, 3) in 55-85% yield. Mechanistic insights on the catalytic cycle as obtained by density functional theory studies for a representative complex 1a suggest that an intramolecular hydrogen transfer, from a catechol-OH moiety to a copper bound superoxo moiety, form the rate-determining step of the oxidation process, displaying an activation barrier of 18.3 kcal/mol (ΔG^‡) [6.9 kcal/mol in Δ(PE + ZPE)^‡ scale].