A six degree of freedom head acceleration measurement device for use in football

The high incidence rate of concussions in football provides a unique opportunity to collect biomechanical data to characterize mild traumatic brain injury. The goal of this study was to validate a six degree of freedom (6DOF) measurement device with 12 single-axis accelerometers that uses a novel algorithm to compute linear and angular head accelerations for each axis of the head. The 6DOF device can be integrated into existing football helmets and is capable of wireless data transmission. A football helmet equipped with the 6DOF device was fitted to a Hybrid III head instrumented with a 9 accelerometer array. The helmet was impacted using a pneumatic linear impactor. Hybrid III head accelerations were compared with that of the 6DOF device. For all impacts, peak Hybrid III head accelerations ranged from 24 g to 176 g and 1,506 rad/s(2) to 14,431 rad/s(2). Average errors for peak linear and angular head acceleration were 1% ± 18% and 3% ± 24%, respectively. The average RMS error of the temporal response for each impact was 12.5 g and 907 rad/s(2).     

Brain tissue analysis of impacts to American football helmets

Concussion in American football is a prevalent concern. Research has been conducted examining frequencies, location, and thresholds for concussion from impacts. Little work has been done examining how impact location may affect risk of concussive injury. The purpose of this research was to examine how impact site on the helmet and type of impact, affects the risk of concussive injury as quantified using finite element modelling of the human head and brain. A linear impactor was used to impact a helmeted Hybrid III headform in several locations and using centric and non-centric impact vectors. The resulting dynamic response was used as input for the Wayne State Brain Injury Model to determine the risk of concussive injury by utilizing maximum principal strain as the predictive variable. The results demonstrated that impacts that occur primarily to the side of the head resulted in higher magnitudes of strain in the grey and white matter, as well as the brain stem. Finally, commonly worn American football helmets were used in this research and significant risk of injury was incurred for all impacts. These results suggest that improvements in American football helmets are warranted, in particular for impacts to the side of the helmet.     

On the accuracy of the Head Impact Telemetry (HIT) System used in football helmets

On-field measurement of head impacts has relied on the Head Impact Telemetry (HIT) System, which uses helmet mounted accelerometers to determine linear and angular head accelerations. HIT is used in youth and collegiate football to assess the frequency and severity of helmet impacts. This paper evaluates the accuracy of HIT for individual head impacts. Most HIT validations used a medium helmet on a Hybrid III head. However, the appropriate helmet is large based on the Hybrid III head circumference (58 cm) and manufacturer's fitting instructions. An instrumented skull cap was used to measure the pressure between the head of football players (n=63) and their helmet. The average pressure with a large helmet on the Hybrid III was comparable to the average pressure from helmets used by players. A medium helmet on the Hybrid III produced average pressures greater than the 99th percentile volunteer pressure level. Linear impactor tests were conducted using a large and medium helmet on the Hybrid III. Testing was conducted by two independent laboratories. HIT data were compared to data from the Hybrid III equipped with a 3-2-2-2 accelerometer array. The absolute and root mean square error (RMSE) for HIT were computed for each impact (n=90). Fifty-five percent (n=49) had an absolute error greater than 15% while the RMSE was 59.1% for peak linear acceleration.     

Evaluation of the protective capacity of baseball helmets for concussive impacts

The purpose of this research was to examine how four different types of baseball helmets perform for baseball impacts when performance was measured using variables associated with concussion. A helmeted Hybrid III headform was impacted by a baseball, and linear and rotational acceleration as well as maximum principal strain were measured for each impact condition. The method was successful in distinguishing differences in design characteristics between the baseball helmets. The results indicated that there is a high risk of concussive injury from being hit by a ball regardless of helmet worn.     

Finite element modelling of equestrian helmet impacts exposes the need to address rotational kinematics in future helmet designs

Jockey head injuries, especially concussions, are common in horse racing. Current helmets do help to reduce the severity and incidences of head injury, but the high concussion incidence rates suggest that there may be scope to improve the performance of equestrian helmets. Finite element simulations in ABAQUS/Explicit were used to model a realistic helmet model during standard helmeted rigid headform impacts and helmeted head model University College Dublin Brain Trauma Model (UCDBTM) impacts.

Current helmet standards for impact determine helmet performance based solely on linear acceleration. Brain injury-related values (stress and strain) from the UCDBTM showed that a performance improvement based on linear acceleration does not imply the same improvement in head injury-related brain tissue loads. It is recommended that angular kinematics be considered in future equestrian helmet standards, as angular acceleration was seen to correlate with stress and strain in the brain.     

A centric/non-centric impact protocol and finite element model methodology for the evaluation of American football helmets to evaluate risk of concussion

American football reports high incidences of head injuries, in particular, concussion. Research has described concussion as primarily a rotation dominant injury affecting the diffuse areas of brain tissue. Current standards do not measure how helmets manage rotational acceleration or how acceleration loading curves influence brain deformation from an impact and thus are missing important information in terms of how concussions occur. The purpose of this study was to investigate a proposed three-dimensional impact protocol for use in evaluating football helmets. The dynamic responses resulting from centric and non-centric impact conditions were examined to ascertain the influence they have on brain deformations in different functional regions of the brain that are linked to concussive symptoms. A centric and non-centric protocol was used to impact an American football helmet; the resulting dynamic response data was used in conjunction with a three-dimensional finite element analysis of the human brain to calculate brain tissue deformation. The direction of impact created unique loading conditions, resulting in peaks in different regions of the brain associated with concussive symptoms. The linear and rotational accelerations were not predictive of the brain deformation metrics used in this study. In conclusion, the test protocol used in this study revealed that impact conditions influences the region of loading in functional regions of brain tissue that are associated with the symptoms of concussion. The protocol also demonstrated that using brain deformation metrics may be more appropriate when evaluating risk of concussion than using dynamic response data alone.     

Protective capacity of an ice hockey goaltender helmet for three events associated with concussion

The purpose of this study was to assess the protective capacity of an ice hockey goaltender helmet for three concussive impact events. A helmeted and unhelmeted headform was used to test three common impact events in ice hockey (fall, puck impacts and shoulder collisions). Peak linear acceleration, rotational acceleration and rotational velocity as well as maximum principal strain and von Mises stress were measured for each impact condition. The results demonstrated the tested ice hockey goaltender helmet was well designed to manage fall and puck impacts but does not consistently protect against shoulder collisions and an opportunity may exist to improve helmet designs to better protect goaltenders from shoulder collisions.     

A computational study of the EN 1078 impact test for bicycle helmets using a realistic subject-specific finite element head model

Abstract

In the present study, the free fall impact test in accordance with the EN1078 standard for certification of bicycle helmets is replicated using numerical simulations. The impact scenario is simulated using an experimentally validated, patient-specific head model equipped with and without a bicycle helmet. Head accelerations and intracranial biomechanical injury metrics during the impacts are recorded. It is demonstrated that wearing the bicycle helmet during the impact reduces biomechanical injury metrics, with the biggest reduction seen in the metric for skull fracture.     

Trash-Talking and Trolling

Among the extra-physical aspects of team sports, the ways in which players talk to each other are among the more colorful but understudied dimensions of competition. To contribute an empirical basis for examining the nature of “trash talk,” we present the results of a study of 291 varsity athletes who compete in the top division among US universities. Based on a preliminary review of trash-talk topics among student-athletes, we asked participants to indicate the frequency with which they have communicated or heard others talk about opposing players’ athleticism, playing ability, physical appearance, boyfriends, girlfriends, sexual behavior, parents, and home institution during competitions. Our three main findings are: (1) Trash-talking is most commonly about the proximately important topic of playing ability while ultimately relevant topics such as physical appearance also appear to be common; (2) Men appear to trash-talk significantly more than women, and consistently across topics; and (3) contact sports such as football, hockey, lacrosse, and wrestling are associated with trash talk significantly more than other sports. We also examined whether the anonymity provided by face-masked helmets in “combat sports” was associated with more trash talk than contact sports played without a helmet (e.g., wrestling) and found no consistent association with face masks. Our findings highlight the ways in which competitors in physical sporting contests attempt to use language—often in ways that focus on players’ kin or reproductive interests—in pursuit of victory while establishing a baseline for future research into trash-talking.     

The influence of impact force redistribution and redirection on maximum principal strain for helmeted head impacts

Abstract

Sporting helmets with linear attenuating strategies are proficient at reducing the risk of traumatic brain injury. However, the continued high incidence of concussion in American football, has led researchers to investigate novel helmet liner strategies. These strategies typically supplement existing technologies by adding or integrating head-helmet decoupling mechanisms. Decoupling strategies aim to redirect or redistribute impact force around the head, reducing impact energy transferred to the brain. This results in decreased brain tissue strain, which is beneficial in injury risk reduction due to the link between tissue strain and concussive injury.

The purpose of this study was to mathematically demonstrate the effect of ten cases, representing theoretical redirection and redistribution helmet liner strategies, on brain tissue strain resulting from impacts to the head. The kinematic response data from twenty head impacts collected in the laboratory was mathematically modified to represent the altered response of the ten different cases and used as input parameters to determine the effect on maximum principal strain (MPS) values, calculated using finite element modeling. The results showed that a reduced dominant coordinate component (contributes the greatest to resultant) of rotational acceleration decreased maximum principal strain in American football helmets. The study theoretically demonstrates that liner strategies, if applied correctly, can influence brain motion, reduce brain tissue strain, and could decrease injury risk in an American football helmet.     

The effects of topology and relative density of lattice liners on traumatic brain injury mitigation

This paper evaluates the effects of topology and relative density of helmet lattice liners on mitigating Traumatic Brain Injury (TBI). Finite Element (FE) models of new lattice liners with prismatic and tetrahedral topologies were developed. A typical frontal head impact in motorcycle accidents was simulated, and linear and rotational accelerations of the head were recorded. A high-fidelity FE model of TBI was loaded with the accelerations to predict the brain response during the accident. The results show that prismatic lattices have better performance in preventing TBI than tetrahedral lattices and EPS that is typically used in helmets. Moreover, varying the cell size through the thickness of the liner improves its performance, but this effect was marginal. The relative density also has a significant effect, with lattices with lower relative densities providing better protection. Across different lattices studied here, the prismatic lattice with a relative density of 6% had the best performance and reduced the peak linear and rotational accelerations, Head Injury Criterion (HIC), brain strain and strain rate by 48%, 37%, 49%, 32% and 65% respectively, compared to the EPS liner. These results can be used to guide the design of lattice helmet liners for better mitigation of TBI.     

The effect of football helmet facemasks on impact behavior during linear drop tests

Football helmet certification tests are performed without a facemask attached to the helmet; however, the facemask is expected to contribute substantially to the structure and dynamics of the helmet through the effects of added mass and added stiffness. Facemasks may increase the peak acceleration and severity index; therefore, as-used helmets may not mitigate head impacts as effectively as certification tests indicate. Furthermore, the effect is expected to depend on the helmet design as well as the orientation and speed of the impact. This study examined the influence of the facemask on impact behavior in a NOCSAE-style linear drop test and the interactions with location, velocity, and helmet model. Increases in peak acceleration and severity index of up to 36% were observed when helmets were tested with the facemask.     

Perceived importance of weight training to selected NCAA Division III men and women student-athletes

The purpose of this study was to examine differences in perception of the importance of weight training as a part of general and sport-specific training for selected collegiate men and women student-athletes. Subjects included 139 men and 165 women varsity National Collegiate Athletic Association Division III student-athletes who participated in the following sports: baseball, basketball, field hockey, football, lacrosse, soccer, softball, swimming, tennis, track & field, or volleyball. Men student-athletes were significantly more likely to consider weight training essential to their general and sport-specific training than women student-athletes, as measured by the Training Information Survey. Additionally, men student-athletes were found to be significantly more competitive and win-oriented than women student-athletes (p < 0.001) as measured by the Sport Orientation Questionnaire, which is consistent with previous research. Results also showed that only highly goal-oriented student-athletes perceived weight training as: (a) important to both men and women and (b) having both feminine and masculine traits. It was concluded that significant gender differences exist in the perceived importance of weight training and that the constructs of competitiveness, win and goal orientation, may influence a student-athlete's perception of the importance of weight training. Coaches of both men and women student-athletes must teach that weight training is important for female and male student-athletes.     

Verification of biomechanical methods employed in a comprehensive study of mild traumatic brain injury and the effectiveness of American football helmets

Concussion, or mild traumatic brain injury, occurs in many activities, mostly as a result of the head being accelerated. A comprehensive study has been conducted to understand better the mechanics of the impacts associated with concussion in American football. This study involves a sequence of techniques to analyse and reconstruct many different head impact scenarios. It is important to understand the validity and accuracy of these techniques in order to be able to use the results of the study to improve helmets and helmet standards. Two major categories of potential errors have been investigated. The first category concerns error sources specific to the use of crash test dummy instrumentation (accelerometers) and associated data processing techniques. These are relied upon to establish both linear and angular head acceleration responses. The second category concerns the use of broadcast video data and crash test dummy head-neck-torso systems. These are used to replicate the complex head impact scenarios of whole body collisions that occur on the football field between two living human beings. All acceleration measurement and processing techniques were based on well-established practices and standards. These proved to be reliable and reproducible. Potential errors in the linear accelerations due to electrical or mechanical noise did not exceed 2% for the three different noise sources investigated. Potential errors in the angular accelerations due to noise could be as high as 6.7%, due to error accumulation of multiple linear acceleration measurements. The potential error in the relative impact velocity between colliding heads could be as high as 11%, and was found to be the largest error source in the sequence of techniques to reconstruct the game impacts. Full-scale experiments with complete crash test dummies in staged head impacts showed maximum errors of 17% for resultant linear accelerations and 25% for resultant angular accelerations.     

Towards reducing impact-induced brain injury: lessons from a computational study of army and football helmet pads

We use computational simulations to compare the impact response of different football and U.S. Army helmet pad materials. We conduct experiments to characterise the material response of different helmet pads. We simulate experimental helmet impact tests performed by the U.S. Army to validate our methods. We then simulate a cylindrical impactor striking different pads. The acceleration history of the impactor is used to calculate the head injury criterion for each pad. We conduct sensitivity studies exploring the effects of pad composition, geometry and material stiffness. We find that (1) the football pad materials do not outperform the currently used military pad material in militarily relevant impact scenarios; (2) optimal material properties for a pad depend on impact energy and (3) thicker pads perform better at all velocities. Although we considered only the isolated response of pad materials, not entire helmet systems, our analysis suggests that by using larger helmet shells with correspondingly thicker pads, impact-induced traumatic brain injury may be reduced.     

Head impact exposure in collegiate football players

In American football, impacts to the helmet and the resulting head accelerations are the primary cause of concussion injury and potentially chronic brain injury. The purpose of this study was to quantify exposures to impacts to the head (frequency, location and magnitude) for individual collegiate football players and to investigate differences in head impact exposure by player position. A total of 314 players were enrolled at three institutions and 286,636 head impacts were recorded over three seasons. The 95th percentile peak linear and rotational acceleration and HITsp (a composite severity measure) were 62.7g, 4378rad/s(2) and 32.6, respectively. These exposure measures as well as the frequency of impacts varied significantly by player position and by helmet impact location. Running backs (RB) and quarter backs (QB) received the greatest magnitude head impacts, while defensive line (DL), offensive line (OL) and line backers (LB) received the most frequent head impacts (more than twice as many than any other position). Impacts to the top of the helmet had the lowest peak rotational acceleration (2387rad/s(2)), but the greatest peak linear acceleration (72.4g), and were the least frequent of all locations (13.7%) among all positions. OL and QB had the highest (49.2%) and the lowest (23.7%) frequency, respectively, of front impacts. QB received the greatest magnitude (70.8g and 5428rad/s(2)) and the most frequent (44% and 38.9%) impacts to the back of the helmet. This study quantified head impact exposure in collegiate football, providing data that is critical to advancing the understanding of the biomechanics of concussive injuries and sub-concussive head impacts.     

Simulation of the effects of different pilot helmets on neck loading during air combat

New generation pilot helmets with mounted devices enhance the capabilities of pilots substantially. However, the additional equipment increases the helmet weight and shifts its center of mass forward. Two helmets with different mass properties were modeled to simulate their effects on the pilot's neck. A musculoskeletal computer model was used, with the methods of inverse dynamics and static optimization, to compute the muscle activations and joint reaction forces for a given range of quasi-static postures at various accelerations experienced during air combat. Head postures which induce much higher loads on the cervical spine than encountered in a neutral position could be identified. The increased weight and the forward shift of the center of mass of a new generation helmet lead to higher muscle activations and higher joint reaction loads over a wide range of head and neck movements. The muscle activations required to balance the head and neck in extreme postures increased the compressive force at the T1-C7 level substantially, while in a neutral posture the muscle activations remained low. The lateral neck muscles can reach activations of 100% and cause compressive joint forces up to 1100N during extensive rotations and extensions at high 'vertical' accelerations (Gz). The calculated values have to be interpreted with care as the model has not been validated. Nevertheless, this systematic analysis could separate the effects of head posture, acceleration and helmet mass on neck loading. More reliable data about mass properties and muscle morphometry with a more detailed motion analysis would help to refine the existing model.     

Effect of helmet inertial properties on head and neck response during +Gz impact accelerations

The objective of the test program was to study the effect of parametric changes in helmet inertial properties on the biodynamic response of human volunteers subjected to +Gz impact accelerations. Test data was used to drive a computer model (DYNAMAN) to estimate the loads and torques in the neck during impact. Currently, only seven of eleven test cells with variations in the inertial properties of the helmet along the x-axis of the head have been analyzed. Preliminary data analysis indicates that the biodynamic response of the head under the tested conditions is slightly more sensitive to the moment of inertia of the helmet than its weight alone even though both variables showed a general trend for the head accelerations (linear and angular) to increase. It has been shown that the model can give good estimates of the compression loads in the neck, but that the torque estimates will be low, possibly by a factor of three. Further refinements of the neck joint parameters in the model will be required in order to increase the motion of the head segment during impact acceleration and will be done prior to completing the remaining test cell analysis. Finally, all the test data will be evaluated to determine if the current interim head criteria require modification.     

Simulation-based assessment for construction helmets

In recent years, there has been a concerted effort for greater job safety in all industries. Personnel protective equipment (PPE) has been developed to help mitigate the risk of injury to humans that might be exposed to hazardous situations. The human head is the most vulnerable to impact as a moderate magnitude can cause serious injury or death. That is why industries have required the use of an industrial hard hat or helmet. There have only been a few articles published to date that are focused on the risk of head injury when wearing an industrial helmet. A full understanding of the effectiveness of construction helmets on reducing injury is lacking. This paper presents a simulation-based method to determine the threshold at which a human will sustain injury when wearing a construction helmet and assesses the risk of injury for wearers of construction helmets or hard hats. Advanced finite element, or FE, models were developed to study the impact on construction helmets. The FE model consists of two parts: the helmet and the human models. The human model consists of a brain, enclosed by a skull and an outer layer of skin. The level and probability of injury to the head was determined using both the head injury criterion (HIC) and tolerance limits set by Deck and Willinger. The HIC has been widely used to assess the likelihood of head injury in vehicles. The tolerance levels proposed by Deck and Willinger are more suited for finite element models but lack wide-scale validation. Different cases of impact were studied using LSTC's LS-DYNA.     

Effect of alternating G loads on the activities of a human operator wearing a protective helmet

Specific types of operator activity make it necessary to wear a helmet protecting the head against various physical factors. Wearing a heavy helmet for a long time may affect the quality of operator activity when the operator is exposed to alternating G loads. Studies have been performed using a dynamic model of a vehicle subjected to considerable alternating G loads. Crash test dummies have been used to test a system protecting the cervical region of the spinal column. The effects of accelerations, vibrations, and the time of wearing helmets with different weights on the functional state and operator performance have been studied. Data on the effects of helmet weight on some physiological, psychological, and biomechanical reactions of human operators are reported. Some relationships have been found that have practical implications for the functional improvement of the operator component of vehicle operation.