Affinity purification of DNA and RNA from environmental samples with peptide nucleic acid clamps

Bispeptide nucleic acids (bis-PNAs; PNA clamps), PNA oligomers, and DNA oligonucleotides were evaluated as affinity purification reagents for subfemtomolar 16S ribosomal DNA (rDNA) and rRNA targets in soil, sediment, and industrial air filter nucleic acid extracts. Under low-salt hybridization conditions (10 mM NaPO(4), 5 mM disodium EDTA, and 0.025% sodium dodecyl sulfate [SDS]) a PNA clamp recovered significantly more target DNA than either PNA or DNA oligomers. The efficacy of PNA clamps and oligomers was generally enhanced in the presence of excess nontarget DNA and in a low-salt extraction-hybridization buffer. Under high-salt conditions (200 mM NaPO(4), 100 mM disodium EDTA, and 0.5% SDS), however, capture efficiencies with the DNA oligomer were significantly greater than with the PNA clamp and PNA oligomer. Recovery and detection efficiencies for target DNA concentrations of > or =100 pg were generally >20% but depended upon the specific probe, solution background, and salt condition. The DNA probe had a lower absolute detection limit of 100 fg of target (830 zM [1 zM = 10(-21) M]) in high-salt buffer. In the absence of exogenous DNA (e.g., soil background), neither the bis-PNA nor the PNA oligomer achieved the same absolute detection limit even under a more favorable low-salt hybridization condition. In the presence of a soil background, however, both PNA probes provided more sensitive absolute purification and detection (830 zM) than the DNA oligomer. In varied environmental samples, the rank order for capture probe performance in high-salt buffer was DNA > PNA > clamp. Recovery of 16S rRNA from environmental samples mirrored quantitative results for DNA target recovery, with the DNA oligomer generating more positive results than either the bis-PNA or PNA oligomer, but PNA probes provided a greater incidence of detection from environmental samples that also contained a higher concentration of nontarget DNA and RNA. Significant interactions between probe type and environmental sample indicate that the most efficacious capture system depends upon the particular sample type (and background nucleic acid concentration), target (DNA or RNA), and detection objective.     

Affinity Purification of DNA and RNA from Environmental Samples with Peptide Nucleic Acid Clamps

Bispeptide nucleic acids (bis-PNAs; PNA clamps), PNA oligomers, and DNA oligonucleotides were evaluated as affinity purification reagents for subfemtomolar 16S ribosomal DNA (rDNA) and rRNA targets in soil, sediment, and industrial air filter nucleic acid extracts. Under low-salt hybridization conditions (10 mM NaPO₄, 5 mM disodium EDTA, and 0.025% sodium dodecyl sulfate [SDS]) a PNA clamp recovered significantly more target DNA than either PNA or DNA oligomers. The efficacy of PNA clamps and oligomers was generally enhanced in the presence of excess nontarget DNA and in a low-salt extraction-hybridization buffer. Under high-salt conditions (200 mM NaPO₄, 100 mM disodium EDTA, and 0.5% SDS), however, capture efficiencies with the DNA oligomer were significantly greater than with the PNA clamp and PNA oligomer. Recovery and detection efficiencies for target DNA concentrations of ≥100 pg were generally >20% but depended upon the specific probe, solution background, and salt condition. The DNA probe had a lower absolute detection limit of 100 fg of target (830 zM [1 zM = 10⁻²¹ M]) in high-salt buffer. In the absence of exogenous DNA (e.g., soil background), neither the bis-PNA nor the PNA oligomer achieved the same absolute detection limit even under a more favorable low-salt hybridization condition. In the presence of a soil background, however, both PNA probes provided more sensitive absolute purification and detection (830 zM) than the DNA oligomer. In varied environmental samples, the rank order for capture probe performance in high-salt buffer was DNA > PNA > clamp. Recovery of 16S rRNA from environmental samples mirrored quantitative results for DNA target recovery, with the DNA oligomer generating more positive results than either the bis-PNA or PNA oligomer, but PNA probes provided a greater incidence of detection from environmental samples that also contained a higher concentration of nontarget DNA and RNA. Significant interactions between probe type and environmental sample indicate that the most efficacious capture system depends upon the particular sample type (and background nucleic acid concentration), target (DNA or RNA), and detection objective.     

Surface density dependence of PCR amplicon hybridization on PNA/DNA probe layers

Surface plasmon field-enhanced fluorescence spectroscopy was employed to extensively investigate the hybridization behaviors of polymerase chain reaction (PCR) amplicons on a peptide nucleic acid (PNA) or DNA probe layer that was previously attached on a streptavidin-modified gold surface via biotin/streptavidin interaction. Despite the neutral backbone of PNA, the hybridization reactions were strongly influenced by the variation of ionic strength. The association rates exhibited a monotonic decrease with ionic strength increase and the maximum hybridization signal was achieved at an intermediate sodium concentration (approximately 100 mM). These effects were mainly ascribed to the electrostatic cross talk among the hybridized DNA molecules and the secondary structure of PCR amplicons. For the negatively charged DNA probes, the hybridization reaction was subjected additionally to the DNA/DNA electrostatic barrier, particularly in lower ionic strength range (e.g., 10 approximately 150 mM Na(+)). The electrostatic cross talk was shown to be largely reduced if the PNA probe layer was sufficiently diluted by following a strategic templated immobilization method. As a consequence, a pseudo-first-order kinetic model was applicable to describe the hybridization kinetics, and affinity constants were derived for evaluating the influence of single nucleotide polymorphisms (SNPs).     

Conjugates of PNA with naphthalene diimide derivatives having a broad range of DNA affinities

Peptide nucleic acids (PNAs) are neutral DNA analogues, which bind single-stranded DNA (ssDNA) strongly and with high sequence specificity. However, binding efficiency is dependent on the purine content of the PNA strand. This property make more difficult application of PNA as hybridization probes in, e.g., PNA chips, since at a set temperature the hybridization of a fraction of the DNA targets to the PNA probes does not obey Watson-Crick binding rules. The polypurine PNAs, for example, bind the mismatch containing DNA targets stronger, than the pyrimidine rich PNAs their fully complementary targets. Herein we show that PNA-DNA binding efficiency can be finely tuned by the conjugation of derivatives of naphthalene diimide (NADI) to the N-terminus of PNA using polyamide linkers of different lengths. This approach can potentially be used for the design of PNA probes, which bind their DNA targets with similar affinity independently of the PNA sequence.     

Enhanced nucleic acid capture and flow cytometry detection with peptide nucleic acid probes and tunable-surface microparticles

New methods for automated, direct nucleic acid purification and detection are required for the next generation of unattended environmental monitoring devices. In this study we investigated whether tunable-surface bead chemistry and peptide nucleic acids (PNA) could enhance the recovery and detection of intact rRNA in both test tube and automated suspension array hybridization formats. Intact rRNA was easily captured and detected on PNA-coated Lumavidin beads from 0.1 ng total RNA with a 15-min hybridization in pH 7 buffer, representing 1.7 x 10(3) cell equivalents of total RNA. DNA-conjugated beads in pH 5 hybridization buffer required an overnight hybridization to achieve a detectable signal at 0.1 ng target RNA. Standard DNA hybridization conditions (pH 7) were one order of magnitude less sensitive than the tunable-surface (pH 5) condition. The PNA-conjugated particles were 100x more sensitive than the tunable-surface DNA particles in the automated format, with a detection limit of 0.1 ng total RNA. The detection limits for total RNA on PNA-conjugated microparticles is immediately conducive to the detection and characterization of microorganisms in low-biomass environments or to the identification of rare sequences in a complex sample mixture, without using PCR.     

Peptide nucleic acid (PNA) facilitates multistranded hybrid formation between linear double-stranded DNA targets and RecA protein-coated complementary single-stranded DNA probes

RecA protein-coated single-stranded DNA probes, known as RecA nucleoprotein filaments, bind specifically to homologous DNA sequences within double-stranded DNA targets, forming multistranded probe-target DNA hybrids. This DNA hybridization reaction can be used for sequence-specific gene capture, gene modification, and gene regulation. Thus, factors that enhance the efficiency of the hybridization reaction are of significant practical importance. We show here that the hybridization of a peptide nucleic acid (PNA) within or adjacent to the probe-target homology region significantly enhances the yield of hybrid DNA formed in the reaction between linear double-stranded DNA targets and RecA protein-coated complementary single-stranded (css)DNA probes. The possible mechanisms and the advantages of using RecA nucleoprotein filaments in combination with PNA for genomic DNA cloning and mutagenesis are presented.     

Light-up probes: thiazole orange-conjugated peptide nucleic acid for detection of target nucleic acid in homogeneous solution

We have constructed light-up probes for nucleic acid detection. The light-up probe is a peptide nucleic acid (PNA) oligonucleotide to which the asymmetric cyanine dye thiazole orange (TO) is tethered. It combines the excellent hybridization properties of PNA and the large fluorescence enhancement of TO upon binding to DNA. When the PNA hybridizes to target DNA, the dye binds and becomes fluorescent. Free probes have low fluorescence, which may increase almost 50-fold upon hybridization to complementary nucleic acid. This makes the light-up probes particularly suitable for homogeneous hybridization assays, where separation of the bound and free probe is not necessary. We find that the fluorescence enhancement upon hybridization varies among different probes, which is mainly due to variations in free probe fluorescence. For eight probes studied the fluorescence quantum yield at 25 degrees C in the unbound state ranged from 0.0015 to 0.08 and seemed to depend mainly on the PNA sequence. The binding of the light-up probes to target DNA is highly sequence specific and a single mismatch in a 10-mer target sequence was readily identified.     

Optimization of label-free DNA detection with electrochemical impedance spectroscopy using PNA probes

DNA biosensors, especially those based upon detection of the intrinsic negative charge of target DNA, can be greatly improved by the use of uncharged peptide nucleic acid (PNA) probes. Hybridization causes an increased electrostatic barrier for the negatively charged ferri/ferrocyanide redox couple, resulting in an increase in charge transfer resistance R(ct) that is measured using electrochemical impedance spectroscopy. We report on the optimization of PNA probe surface density by the simultaneous co-immobilization of thiol-modified probes and mercaptohexanol, with the PNA surface density controlled by the thiol mole ratio in solution. Maximum R(ct) change upon hybridization is obtained with 10% PNA mole fraction. The effect of the measurement buffer ionic strength is investigated. The electrostatic barrier for charge transfer to the ferri/ferrocyanide redox couple is approximately independent of ionic strength with PNA probes, but greatly increases with decreasing ionic strength, after hybridization with target DNA. This significantly enhances the R(ct) change upon hybridization. The optimization of PNA surface density and measurement buffer ionic strength leads to a 385-fold increase in R(ct) upon hybridization, a factor of 100 larger than previously reported results using either PNA or DNA probes.     

Quantitative rRNA-Targeted Solution-Based Hybridization Assay Using Peptide Nucleic Acid Molecular Beacons

The potential of a solution-based hybridization assay using peptide nucleic acid (PNA) molecular beacon (MB) probes to quantify 16S rRNA of specific populations in RNA extracts of environmental samples was evaluated by designing PNA MB probes for the genera Dechloromonas and Dechlorosoma. In a kinetic study with 16S rRNA from pure cultures, the hybridization of PNA MB to target 16S rRNA exhibited a higher final hybridization signal and a lower apparent rate constant than the hybridizations to nontarget 16S rRNAs. A concentration of 10 mM NaCl in the hybridization buffer was found to be optimal for maximizing the difference between final hybridization signals from target and nontarget 16S rRNAs. Hybridization temperatures and formamide concentrations in hybridization buffers were optimized to minimize signals from hybridizations of PNA MB to nontarget 16S rRNAs. The detection limit of the PNA MB hybridization assay was determined to be 1.6 nM of 16S rRNA. To establish proof for the application of PNA MB hybridization assays in complex systems, target 16S rRNA from Dechlorosoma suillum was spiked at different levels to RNA isolated from an environmental (bioreactor) sample, and the PNA MB assay enabled effective quantification of the D. suillum RNA in this complex mixture. For another environmental sample, the quantitative results from the PNA MB hybridization assay were compared with those from clone libraries.     

Snap-to-it probes: chelate-constrained nucleobase oligomers with enhanced binding specificity

We describe snap-to-it probes, a novel probe technology to enhance the hybridization specificity of natural and unnatural nucleic acid oligomers using a simple and readily introduced structural motif. Snap-to-it probes were prepared from peptide nucleic acid (PNA) oligomers by modifying each terminus with a coordinating ligand. The two coordinating ligands constrain the probe into a macrocyclic configuration through formation of an intramolecular chelate with a divalent transition metal ion. On hybridization with a DNA target, the intramolecular chelate in the snap-to-it probe dissociates, resulting in the probe ‘snapping-to’ and binding the target nucleic acid. Thermal transition analysis of snap-to-it probes with complementary and single-mismatch DNA targets revealed that the transition between free and target-bound probe conformations was a reversible equilibrium, and the intramolecular chelate provided a thermodynamic barrier to target binding that resulted in a significant increase in mismatch discrimination. A 4–6°C increase in specificity (ΔT_m) was observed from snap-to-it probes bearing either terminal iminodiacetic acid ligands coordinated with Ni²⁺, or terminal dihistidine and nitrilotriacetic acid ligands coordinated with Cu²⁺. The difference in specificity of the PNA oligomer relative to DNA was more than doubled in snap-to-it probes. Snap-to-it probes labeled with a fluorophore-quencher pair exhibited target-dependent fluorescence enhancement upon binding with target DNA.     

Development of a PNA probe for the detection of the toxic dinoflagellate Takayama pulchella

A peptide nucleic acid (PNA) probe was developed to detect the toxic dinoflagellate, Takayama pulchella TPXM, using fluorescent in situ hybridization (FISH) combined with epifluorescent microscopy and flow cytometry. The PNA probe was then used to analyze HAB samples from Xiamen Bay. The results indicated that the fluorescein phosphoramidite (FAM)-labeled probe (PNATP28S01) [Flu]-OO ATG CCA TCT CAA GA, entered the algal cells easily and bound to the target species specifically. High hybridization efficiency (nearly 100%) was observed. Detection by epifluorescence microscopy and flow cytometry gave comparable results. The fluorescence intensity of the PNA probe hybridized to T. pulchella cells was remarkably higher than that of two DNA probes used in this study and than the autofluorescence of the blank and negative control cells. In addition, the hybridization condition of the PNA probe was easier to control than DNA probes, and when applied to field-collected samples, the PNA probe showed higher binding efficiency to the target species than DNA probes. With the observed high specificity, binding efficiency, and detection signal intensity, the PNA probe will be useful for monitoring harmful algal blooms of T. pulchella.     

PNA openers as a tool for direct quantification of specific targets in duplex DNA

We report a new approach for target quantification directly within DNA duplex. Our assay is based on the formation of a new biomolecular structure, the PD-loop. The approach takes advantage of a selective hybridization of a probe to double-stranded DNA (dsDNA), which is locally opened by a pair of bis-PNA oligomers. To optimize the technique, several experimental formats are tested with the use of PNA and oligonucleotide probes. The highest sensitivity is achieved when the hybridized probe is extended and multiply labeled with 125I-dCTP by DNA polymerase via strand displacement in the presence of single-strand binding (SSB) protein. In this case, the PNA-assisted probe hybridization combined with the method of multiphoton detection (MPD) allows to monitor sub-attomolar amounts of the HIV-1 target on the background of unrelated DNA at sub-nCi level of radioactivity. The developed robust methodology is highly discriminative to single mutations, thus being of practical use for DNA analysis.     

Detection of hybrid formation between peptide nucleic acids and DNA by fluorescence polarization in the presence of polylysine.

A new method for the detection of PNA/DNA hybrids is presented. In this method, short PNA probes (9-13 mer) are labeled with a fluorescent dye and allowed to hybridize to target DNA molecules. A cationic polyamino acid, such as polylysine, is then added to the reaction mixture, whereupon the DNA molecules bind electrostatically to this polycation. The PNA probes, which are uncharged or may carry only a small charge due to the fluorescent dye, do not bind to polylysine unless hybridized to the negatively charged DNA target. The binding of the labeled PNA/DNA hybrid to the high-molecular-weight polymer leads to a significant change in the rotational correlation time of the fluorophore attached to the PNA. This can be conveniently detected by measuring the fluorescence polarization of the latter. The method is completely homogeneous because no separation of free from bound PNA probe is required. The hybridization and dehybridization reactions can be followed in real time. The method has been applied to the typing of single-nucleotide polymorphisms in PCR products.     

Development of Peptide Nucleic Acid Probes for Detection of the HER2 Oncogene

Peptide nucleic acids (PNAs) have gained much interest as molecular recognition tools in biology, medicine and chemistry. This is due to high hybridization efficiency to complimentary oligonucleotides and stability of the duplexes with RNA or DNA. We have synthesized 15/16-mer PNA probes to detect the HER2 mRNA. The performance of these probes to detect the HER2 target was evaluated by fluorescence imaging and fluorescence bead assays. The PNA probes have sufficiently discriminated between the wild type HER2 target and the mutant target with single base mismatches. Furthermore, the probes exhibited excellent linear concentration dependence between 0.4 to 400 fmol for the target gene. The results demonstrate potential application of PNAs as diagnostic probes with high specificity for quantitative measurements of amplifications or over-expressions of oncogenes.     

Hybridisation based DNA screening on peptide nucleic acid (PNA) oligomer arrays.

Arrays of up to some 1000 PNA oligomers of individual sequence were synthesised on polymer membranes using a robotic device originally designed for peptide synthesis. At approximately 96%, the stepwise synthesis efficiency was comparable to standard PNA synthesis procedures. Optionally, the individual, fully deprotected PNA oligomers could be removed from the support for further use, because an enzymatically cleavable but otherwise stable linker was used. Since PNA arrays could form powerful tools for hybridisation based DNA screening assays due to some favourable features of the PNA molecules, the hybridisation behaviour of DNA probes to PNA arrays was investigated for a precise understanding of PNA-DNA interactions on solid support. Hybridisation followed the Watson-Crick base pairing rules with higher duplex stabilities than on corresponding DNA oligonucleotide sensors. Both the affinity and specificity of DNA hybridisation to the PNA oligomers depended on the hybridisation conditions more than expected. Successful discrimination between hybridisation to full complementary PNA sequences and truncated or mismatched versions was possible at salt concentrations down to 10 mM Na+and below, although an increasing tendency to unspecific DNA binding and few strong mismatch hybridisation events were observed.     

Electrospray ionisation-cleavable tandem nucleic acid mass tag–peptide nucleic acid conjugates: synthesis and applications to quantitative genomic analysis using electrospray ionisation-MS/MS

The synthesis and characterization of isotopomer tandem nucleic acid mass tag–peptide nucleic acid (TNT–PNA) conjugates is described along with their use as electrospray ionisation-cleavable (ESI-Cleavable) hybridization probes for the detection and quantification of target DNA sequences by electrospray ionisation tandem mass spectrometry (ESI-MS/MS). ESI-cleavable peptide TNT isotopomers were introduced into PNA oligonucleotide sequences in a total synthesis approach. These conjugates were evaluated as hybridization probes for the detection and quantification of immobilized synthetic target DNAs using ESI-MS/MS. In these experiments, the PNA portion of the conjugate acts as a hybridization probe, whereas the peptide TNT is released in a collision-based process during the ionization of the probe conjugate in the electrospray ion source. The cleaved TNT acts as a uniquely resolvable marker to identify and quantify a unique target DNA sequence. The method should be applicable to a wide variety of assays requiring highly multiplexed, quantitative DNA/RNA analysis, including gene expression monitoring, genetic profiling and the detection of pathogens.     

Application of cationic conjugated polymers in microarrays using label-free DNA targets

A fluorescence-based microarray technique that does not require target DNA labeling is detailed. This 'label-free' approach utilizes a cationic, water-soluble conjugated polymer PFBT (poly[9,9'-bis(6'-(N,N,N-trimethylammonium)hexyl)fluorene-co-alt-4,7-(2,1,3-benzothiadiazole) dibromide]), and neutral PNA (peptide nucleic acid) hybridization probes. DNA hybridization to immobilized PNA spots results in a change in the net charge at that particular surface. Electrostatic interactions between the cationic polymer and negatively charged DNA bind the polymer to the hybrid DNA/PNA complex. By exciting the conjugated polymer at 488 nm on a commercial microarray scanner, the presence of the target is directly indicated by the fluorescence emission of the polymer. This feature eliminates the necessity of target labeling required in traditional microarray protocols. There are five steps involved in the procedure before scanning or imaging the array: (i) slide hydration, (ii) target hybridization, (iii) post-hybridization washing, (iv) polymer application and (v) polymer washing. Each step takes 20 min to 1 h. The overall protocol requires approximately 2-3 h.     

Parallel characterization of anaerobic toluene- and ethylbenzene-degrading microbial consortia by PCR-denaturing gradient gel electrophoresis,RNA-DNA membrane hybridization,and DNA microarray technology

A mesophilic toluene-degrading consortium (TDC) and an ethylbenzene-degrading consortium (EDC) were established under sulfate-reducing conditions. These consortia were first characterized by denaturing gradient gel electrophoresis (DGGE) fingerprinting of PCR-amplified 16S rRNA gene fragments, followed by sequencing. The sequences of the major bands (T-1 and E-2) belonging to TDC and EDC, respectively, were affiliated with the family Desulfobacteriaceae. Another major band from EDC (E-1) was related to an uncultured non-sulfate-reducing soil bacterium. Oligonucleotide probes specific for the 16S rRNAs of target organisms corresponding to T-1, E-1, and E-2 were designed, and hybridization conditions were optimized for two analytical formats, membrane and DNA microarray hybridization. Both formats were used to characterize the TDC and EDC, and the results of both were consistent with DGGE analysis. In order to assess the utility of the microarray format for analysis of environmental samples, oil-contaminated sediments from the coast of Kuwait were analyzed. The DNA microarray successfully detected bacterial nucleic acids from these samples, but probes targeting specific groups of sulfate-reducing bacteria did not give positive signals. The results of this study demonstrate the limitations and the potential utility of DNA microarrays for microbial community analysis.     

Solution-phase detection of polynucleotides using interacting fluorescent labels and competitive hybridization

DNA was assayed in a homogeneous format using DNA probes containing hybridization-sensitive labels. The DNA probes were prepared from complementary DNA strands in which one strand was covalently labeled on the 5'-terminus with fluorescein and the complementary strand was covalently labeled on the 3'-terminus with a quencher of fluorescein emission, either pyrenebutyrate or sulforhodamine 101. Probes prepared in this manner were able to detect unlabeled target DNA by competitive hybridization producing fluorescence signals which increased with increasing target DNA concentration. A single pair of complementary probes detected target DNA at a concentration of approximately 0.1 nM in 10 min or about 10 pM in 20-30 min. Detection of a 4 pM concentration of target DNA was demonstrated in 6 h using multiple probe pairs. The major limiting factors were background fluorescence and hybridization rates. Continuous monitoring of fluorescence during competitive hybridization allowed correction for variable sample backgrounds at probe concentrations down to 20 pM; however, the time required for complete hybridization increased to greater than 1 h at probe concentrations below 0.1 nM. A promising application for this technology is the rapid detection of amplified polynucleotides. Detection of 96,000 target DNA molecules in a 50-microliters sample was demonstrated following in vitro amplification using the polymerase chain reaction technique.