Gas-phase removal of biofilms from various surfaces using carbon dioxide aerosols

The present study evaluated the removal of Escherichia coli XL1-blue biofilms using periodic jets of carbon dioxide aerosols (a mixture of solid and gaseous CO₂) with nitrogen gas. The aerosols were generated by the adiabatic expansion of high-pressure CO₂ gas through a nozzle and used to remove air-dried biofilms. The areas of the biofilms were measured from scanning electron micrographs before and after applying the aerosols. The removal efficiency of the aerosol treatment was measured with various air-drying times of the biofilms before the treatment, surface materials, and durations of CO₂ aerosols in each 8-s aerosol–nitrogen cleaning cycle. Nearly 100% of the fresh biofilms were removed from the various surfaces very reliably within 90 s. This technique can be useful for removing unsaturated biofilms on solid surfaces and has potential applications for cleaning bio-contaminated surfaces.     

Combined application of bacterial predation and carbon dioxide aerosols to effectively remove biofilms

This study evaluated predation with Bdellovibrio bacteriovorous and CO₂ aerosol spraying to remove fluorescent Escherichia coli biofilms from silicon chips. Initial tests found that 7.5×10⁵ viable E. coli cells were dispersed into the surrounding environment during aerosol treatment. The total number dispersed per test decreased to only 16 for predated biofilms. This is nearly 50,000-fold lower compared to untreated chips and 1000-fold lower compared to chips soaked in HEPES buffer only. Both scanning electron microscopy (SEM) and fluorescent microscopy analyses confirmed that predation alone did not completely eradicate the biofilm population. When used in conjunction with CO₂ aerosols, however, no fluorescent signals remained and the SEM pictures showed a pristine surface devoid of bacteria. Consequently, this study demonstrates these two methods can be used with each other to significantly remove biofilms from surfaces while also significantly reducing the likelihood of human exposure to potential pathogens during their removal.     

Gas-phase removal of biofilms from various surfaces using carbon dioxide aerosols

The present study evaluated the removal of Escherichia coli XL1-blue biofilms using periodic jets of carbon dioxide aerosols (a mixture of solid and gaseous CO(2)) with nitrogen gas. The aerosols were generated by the adiabatic expansion of high-pressure CO(2) gas through a nozzle and used to remove air-dried biofilms. The areas of the biofilms were measured from scanning electron micrographs before and after applying the aerosols. The removal efficiency of the aerosol treatment was measured with various air-drying times of the biofilms before the treatment, surface materials, and durations of CO(2) aerosols in each 8-s aerosol-nitrogen cleaning cycle. Nearly 100% of the fresh biofilms were removed from the various surfaces very reliably within 90?s. This technique can be useful for removing unsaturated biofilms on solid surfaces and has potential applications for cleaning bio-contaminated surfaces.     

Growth of Escherichia coli in Model Distribution System Biofilms Exposed to Hypochlorous Acid or Monochloramine

Bacteria indigenous to water distribution systems were used to grow multispecies biofilms within continuous-flow slide chambers. Six flow chambers were also inoculated with an Escherichia coli isolate obtained from potable water. The effect of disinfectants on bacterial populations was determined after exposure of established biofilms to 1 ppm of hypochlorous acid (ClOH) for 67 min or 4 ppm of monochloramine (NH₂Cl) for 155 min. To test the ability of bacterial populations to initiate biofilm formation in the presence of disinfectants, we assessed the biofilms after 2 weeks of exposure to residual concentrations of 0.2 ppm of ClOH or 4 ppm of NH₂Cl. Lastly, to determine the effect of recommended residual concentrations on newly established biofilms, we treated systems with 0.2 ppm of ClOH after 5 days of growth in the absence of disinfectant. Whole-cell in situ hybridizations using fluorescently tagged, 16S rRNA-targeted oligonucleotide probes performed on cryosectioned biofilms permitted the direct observation of metabolically active bacterial populations, including certain phylogenetic groups and species. The results of these studies confirmed the resistance of established bacterial biofilms to treatment with recommended levels of disinfectants. Specifically, Legionella pneumophila, E. coli, and β and δ proteobacteria were identified within biofilms both before and after treatment. Furthermore, although it was undetected using routine monitoring techniques, the observation of rRNA-containing E. coli within biofilms demonstrated not only survival but also metabolic activity of this organism within the model distribution systems. The persistence of diverse bacterial species within disinfectant-treated biofilms suggests that current testing practices underestimate the risk to immunocompromised individuals of contracting waterborne disease.     

Unsaturated Fatty Acid,cis-2-Decenoic Acid,in Combination with Disinfectants or Antibiotics Removes Pre-Established Biofilms Formed by Food-Related Bacteria

Biofilm formation by food-related bacteria and food-related pathogenesis are significant problems in the food industry. Even though much disinfection and mechanical procedure exist for removal of biofilms, they may fail to eliminate pre-established biofilms. cis-2 decenoic acid (CDA), an unsaturated fatty acid messenger produced by Pseudomonas aeruginosa, is reportedly capable of inducing the dispersion of established biofilms by multiple types of microorganisms. However, whether CDA has potential to boost the actions of certain antimicrobials is unknown. Here, the activity of CDA as an inducer of pre-established biofilms dispersal, formed by four main food pathogens; Staphylococcus aureus, Bacillus cereus, Salmonella enterica and E. coli, was measured using both semi-batch and continuous cultures bioassays. To assess the ability of CDA combined biocides treatments to remove pre-established biofilms formed on stainless steel discs, CFU counts were performed for both treated and untreated cultures. Eradication of the biofilms by CDA combined antibiotics was evaluated using crystal violet staining. The effect of CDA combined treatments (antibiotics and disinfectants) on biofilm surface area and bacteria viability was evaluated using fluorescence microscopy, digital image analysis and LIVE/DEAD staining. MICs were also determined to assess the probable inhibitory effects of CDA combined treatments on the growth of tested microorganisms'' planktonic cells. Treatment of pre-established biofilms with only 310 nM CDA resulted in at least two-fold increase in the number of planktonic cells in all cultures. While antibiotics or disinfectants alone exerted a trivial effect on CFU counts and percentage of surface area covered by the biofilms, combinational treatments with both 310 nM CDA and antibiotics or disinfectants led to approximate 80% reduction in biofilm biomass. These data suggests that combined treatments with CDA would pave the way toward developing new strategies to control biofilms with widespread applications in industry as well as medicine.     

Development and Evaluation of an Online CO2 Evolution Test and a Multicomponent Biodegradation Test System

Well-established biodegradation tests use biogenously evolved carbon dioxide (CO₂) as an analytical parameter to determine the ultimate biodegradability of substances. A newly developed analytical technique based on the continuous online measurement of conductivity showed its suitability over other techniques. It could be demonstrated that the method met all criteria of established biodegradation tests, gave continuous biodegradation curves, and was more reliable than other tests. In parallel experiments, only small variations in the biodegradation pattern occurred. When comparing the new online CO₂ method with existing CO₂ evolution tests, growth rates and lag periods were similar and only the final degree of biodegradation of aniline was slightly lower. A further test development was the unification and parallel measurement of all three important summary parameters for biodegradation—i.e., CO₂ evolution, determination of the biochemical oxygen demand (BOD), and removal of dissolved organic carbon (DOC)—in a multicomponent biodegradation test system (MCBTS). The practicability of this test method was demonstrated with aniline. This test system had advantages for poorly water-soluble and highly volatile compounds and allowed the determination of the carbon fraction integrated into biomass (heterotrophic yield). The integrated online measurements of CO₂ and BOD systems produced continuous degradation curves, which better met the stringent criteria of ready biodegradability (60% biodegradation in a 10-day window). Furthermore the data could be used to calculate maximal growth rates for the modeling of biodegradation processes.     

Simplified methods for monitoring petroleum‐contaminated ground water and soil vapor

Portable meters and simplified gas Chromatographic (GC) techniques were investigated for monitoring volatile hydrocarbon (HC), CO₂, and O₂, concentrations in groundwater, exhaust gases, and soil vapor during in situ remediation using soil vapor extraction (SVE) and air sparging (AS). Results of groundwater samples analyzed in‐house using a headspace technique compared well to split samples analyzed by a certified analytical laboratory (r² = 0.94). SVE exhaust gas HC and CO₂ concentrations measured using a GT201 portable HC/O₂ meter and a RA‐411A meter (GasTech), respectively, were highly correlated with in‐house laboratory GC analyses (r² = 0.91). O₂ concentrations fell in a small range and meter analyses were not well correlated with laboratory analyses. Results of soil gas monitoring were not as well correlated as those for exhaust gases for HC, CO₂, or O₂, perhaps due to environmental conditions such as changes in relative humidity or the wider range of soil gas values. Overall, the meters were good indicators of vapor contamination, they greatly simplified estimates of total HC mass removal, and they allowed estimates of the biological contribution to contaminant removal during the remediation process.     

Demonstration of Both a Photosynthetic and a Nonphotosynthetic CO(2) Requirement for NH(4) Assimilation in the Green Alga Selenastrum minutum

Nitrogen-limited and nitrogen-sufficient cell cultures of Selenastrum minutum (Naeg.) Collins (Chlorophyta) were used to investigate the dependence of NH₄⁺ assimilation on exogenous CO₂. N-sufficient cells were only able to assimilate NH₄⁺ maximally in the presence of CO₂ and light. Inhibition of photosynthesis with 3-(3,4-dichlorophenyl)-1,1-dimethylurea, diuron also inhibited NH₄⁺ assimilation. These results indicate that NH₄⁺ assimilation by N-sufficient cells exhibited a strict requirement for photosynthetic CO₂ fixation. N-limited cells assimilated NH₄⁺ both in the dark and in the light in the presence of 3-(3,4-dichlorophenyl)-1,1-dimethylurea, diuron, indicating that photosynthetic CO₂ fixation was not required for NH₄⁺ assimilation. Using CO₂ removal techniques reported previously in the literature, we were unable to demonstrate CO₂-dependent NH₄⁺ assimilation in N-limited cells. However, employing more stringent CO₂ removal techniques we were able to show a CO₂ dependence of NH₄⁺ assimilation in both the light and dark, which was independent of photosynthesis. The results indicate two independent CO₂ requirements for NH₄⁺ assimilation. The first is as a substrate for photosynthetic CO₂ fixation, whereas the second is a nonphoto-synthetic requirement, presumably as a substrate for the anaplerotic reaction catalyzed by phosphoenolpyruvate carboxylase.     

Carbon capture and sequestration by a treatment wetland

An understanding of detailed kinetic of CO₂ removal by plants can lead to an effective design of the phytoremediation process for anthropogenic CO₂ reduction. This study examines the CO₂ removal rates of five wetland plants (Cyperus alternifolius, Dracaena fragrans, Iris ensata, Iris setosa and Thalia dealbata) by using saturation reaction and first-order reaction kinetic equations. It was determined that the elevation of CO₂ levels stimulated the plant-CO₂ uptake rate. The maximum CO₂ removal rates (k) of plants were found to range between 0.76 and 1.21 g m^?2 h^?1. The magnitude of first-order kinetic coefficient of plants (k′) had a close relationship with CO₂ level at half-velocity (K). For consistency, the same kinetics were applied to the continuous flow experiment. A saturation kinetic approach was well suited to estimate the removal rate of CO₂ in continuous flow system, while a first-order kinetic approach was limited to inflow CO₂ levels below 500 ppm.     

Next-Generation Pyrosequencing Analysis of Microbial Biofilm Communities on Granular Activated Carbon in Treatment of Oil Sands Process-Affected Water

The development of biodegradation treatment processes for oil sands process-affected water (OSPW) has been progressing in recent years with the promising potential of biofilm reactors. Previously, the granular activated carbon (GAC) biofilm process was successfully employed for treatment of a large variety of recalcitrant organic compounds in domestic and industrial wastewaters. In this study, GAC biofilm microbial development and degradation efficiency were investigated for OSPW treatment by monitoring the biofilm growth on the GAC surface in raw and ozonated OSPW in batch bioreactors. The GAC biofilm community was characterized using a next-generation 16S rRNA gene pyrosequencing technique that revealed that the phylum Proteobacteria was dominant in both OSPW and biofilms, with further in-depth analysis showing higher abundances of Alpha- and Gammaproteobacteria sequences. Interestingly, many known polyaromatic hydrocarbon degraders, namely, Burkholderiales, Pseudomonadales, Bdellovibrionales, and Sphingomonadales, were observed in the GAC biofilm. Ozonation decreased the microbial diversity in planktonic OSPW but increased the microbial diversity in the GAC biofilms. Quantitative real-time PCR revealed similar bacterial gene copy numbers (>10⁹ gene copies/g of GAC) for both raw and ozonated OSPW GAC biofilms. The observed rates of removal of naphthenic acids (NAs) over the 2-day experiments for the GAC biofilm treatments of raw and ozonated OSPW were 31% and 66%, respectively. Overall, a relatively low ozone dose (30 mg of O₃/liter utilized) combined with GAC biofilm treatment significantly increased NA removal rates. The treatment of OSPW in bioreactors using GAC biofilms is a promising technology for the reduction of recalcitrant OSPW organic compounds.     

Assessment of microbial activity by CO2 production during heating oil storage

Microbial activity is the driving force of the carbon cycle, including the digestion of biomass in the soil, oceans, and oil deposits. This natural diversity of microbial carbon sources poses challenges for humans. Contamination monitoring can be difficult in oil tanks and similar settings. To assess microbial activity in such industrial settings, off‐gas analysis can be employed by considering growth and non‐growth‐associated metabolic activity. In this work, we describe the monitoring of CO₂ as a method for measuring microbial activity. We revealed that the CO₂ signal corresponds to classical growth curves, exemplified by Pseudomonas fluorescens, Yarrowia lipolytica, and Penicillium chrysogenum. Deviations of the CO₂ signal from the growth curves occurred when the yield of biomass on the substrate changed (i.e., the non‐growth‐associated metabolic activities). We monitored CO₂ to track the onset of microbial contamination in an oil tank. This experimental setup was applied to determine the susceptibility of heating oil and biodiesel to microbial contamination long before the formation of problematic biofilms. In summary, the measurement of CO₂ production by bacteria, yeasts, and molds allowed the permanent monitoring of microbial activity under oil storage conditions without invasive sampling.     

Demonstration of biofilm removal from type 304 stainless steel using pulsed-waveform electropolishing

Abstract

This article describes an electrochemical method to remove bacterial biofilm from a stainless steel (SS) surface using a potential pulse/reverse pulse technique. This technique employs a periodic waveform that consists of anodic and cathodic pulses. The pulses can effectively strip a thin layer of metal off the SS surface, along with the adherent biofilm, in a saline solution. Not only can the pulses effectively remove biofilm from the SS surface, but they also regenerate the original mirror-like shiny surface. The importance of this electrochemical biofilm removal method is its wide applicability for any types of biofilms. That is, instead of directly removing the biofilm, it removes a very thin layer of the metal under the biofilm. Thus, the removal process is independent to the nature of the biofilms. Furthermore, this electrochemical biofilm removal method is rapid (less than 30?s of potential pulse time) and does not require hazardous chemicals.     

Effects of increased CO2 levels on growth, photosynthesis, ammonium uptake and cell composition in the macroalga Hypnea spinella (Gigartinales, Rhodophyta)

The red seaweed Hypnea spinella (Gigartinales, Rhodophyta), was cultured at laboratory scale under three different CO₂ conditions, non-enriched air (360?ppm CO₂) and CO₂-enriched air at two final concentrations (750 and 1,600?ppm CO₂), in order to evaluate the influence of increased CO₂ concentrations on growth, photosynthetic capacity, nitrogen removal efficiency, and chemical cellular composition. Average specific growth rates of H. spinella treated with 750 and 1,600?ppm CO₂-enriched air increased by 85.6% and 63.2% compared with non-enriched air cultures. CO₂ reduction percentages close to 12% were measured at 750?ppm CO₂ with respect to 5% and 7% for cultures treated with air and 1,600?ppm CO₂, respectively. Maximum photosynthetic rates were enhanced significantly for high CO₂ treatments, showing P _max values 1.5-fold higher than that for air-treated cultures. N–NH ₄ ⁺ consumption rates were also faster for algae growing at 750 and 1,600?ppm CO₂ than that for non-enriched air cultures. As a consequence of these experimental conditions, soluble carbohydrates increased and soluble protein contents decreased in algae treated with CO₂-enriched air. However, internal C and N contents remained constant at the different CO₂ concentrations. No significant differences in data obtained with both elevated CO₂ treatments, under the assayed conditions, indicate that H. spinella is saturated at dissolved inorganic carbon concentrations close by twice the actual atmospheric levels. The results show that increased CO₂ concentrations might be considered a key factor in order to improve intensively cultured H. spinella production yields and carbon and nitrogen bioremediation efficiencies.     

Evaluation of domestic wastewater treatment using microalgal-bacterial processes: effect of CO<Subscript>2</Subscript> addition on pathogen removal

Microalgal-bacterial processes represent a sustainable and cost-effective biotechnology able to promote efficient wastewater treatment, including natural pathogen removal (disinfection), as well as being able to perform CO₂ uptake and biogas upgrading. In this context, the influence of CO₂ supply from a synthetic gas mixture (30% v/v CO₂) on the removal of pathogens (Pseudomonas, enterococci, and Escherichia coli) and total coliforms during secondary domestic wastewater treatment by a microalgal-bacterial symbiosis in a 180-L high-rate algal pond (HRAP) was investigated. The supply of CO₂ in the HRAP positively influenced the Pseudomonas aeruginosa removal, with the removal efficiency increasing from 97.4% (1.6 log) to 99.6% (2.5 log) without and with CO₂ supply, respectively. Likewise, the total coliform removal efficiency rose from 88.7% (1.1 log) to 99.4% (2.8 log). On the other hand, the effect of CO₂ supply on enterococci (99.7% and 2.6 log) and Escherichia coli (98.6% and 2.2 log) removal was negligible.     

Rapid methods to assess sanitizing efficacy of benzalkonium chloride to Listeria monocytogenes biofilms

Different methods were used to investigate biofilm growth including crystal violet staining, ATP bioluminescence and total viable count. Seven strains of Listeria monocytogenes and 8 of their derivative strains were screened for their capacity to form biofilms. Both adaptation to benzalkonium chloride (BC) and curing of plasmids did not significantly affect biofilm-forming ability. The strains of L. monocytogenes belonging to serotype 1 formed biofilms significantly better as compared to serotype 4 (P = 0.0003). To estimate the efficacy of BC for biofilm elimination the best and the poorest biofilm-formers were used (C719 and LJH 381). It was observed that, L. monocytogenes strain C719 in biofilms is at least 1000 times more resistant to BC than in planktonic form. Cells present in biofilms were shown to recover and grow after BC treatment thus providing a source of recontamination. It was shown that ATP bioluminescence provides good correlation with bacterial counts of L. monocytogenes in biofilms. Staining with crystal violet, on the contrary, did not correlate with bacterial growth in biofilms in the presence of high concentrations of BC but provided information on the concentration of bacterial cells, both live and dead, attached to the surface. ATP bioluminescence was found to be a reliable method for rapid estimation of the efficacy of sanitizers for biofilm disinfection. Crystal violet staining, on the other hand, was shown to be a suitable method to monitor removal of biofilms. Our investigation showed that for Listeria biofilms concentrations of BC higher then 10 mg/ml should be applied for at least 30 min to kill almost all the live cells in biofilms. However, this concentration was still not enough to remove biofilms from the surface of plastic.     

Recognition of Superior Photosynthetic Efficiency in the Field Using the CO(2)-Depletion Technique

The relationship between CO₂ exchange rate (CER) and growth of crops in the field was investigated in Connecticut Broadleaf tobacco (Nicotiana tabacum) using the CO₂-depletion technique. A particular objective was to determine if modest (i.e. <10%) varietal differences could be distinguished in mean CER. Statistical analysis of numerous CER values obtained over a wide range of irradiances during the course of the season indicated that differences of as little as 7% in the mean CER between varieties would be significant (n ~400). The usefulness of the CO₂-depletion technique in detecting modest differences in photosynthetic efficiency has thus been demonstrated. These results are discussed in relation to the prospects for introducing and detecting genetic traits which would diminish photorespiration and increase CER and growth.     

Effect of Carbon Dioxide on Growth of Meat Spoilage Bacteria

The ability of CO₂ to inhibit respiration and growth of representative strains of seven species of meat spoilage bacteria was examined. Enterobacter and Microbacterium thermosphactum were unaffected by CO₂. Both respiration and growth of the other species were inhibited. With four of the species (fluorescent and nonfluorescent Pseudomonas, Alteromonas putrefaciens, and Yersinia enterocolitica), the inhibition pattern in a complex medium was similar, and inhibition was incomplete and reached a maximum level at comparatively low concentrations of CO₂. With Acinetobacter, inhibition continued to increase with increasing CO₂ concentration. The degree of inhibition with a constant concentration of CO₂ in solution increased with decreasing temperature for all CO₂-susceptible species except the nonfluorescent Pseudomonas. Anaerobic growth of CO₂-susceptible facultative anaerobes was unaffected by CO₂.     

Increasing CO2 concentration impact upon nutrient absorption and removal efficiency of supra intensive shrimp pond wastewater by marine microalgae Tetraselmis chui

Abstract

The objective of this study was to investigate the effect of increasing CO₂ concentration on the growth and the capability of Tetraselmis chui. in removal of nitrate, ammonium and phosphate from shrimp pond wastewater (SPWW). The factorial experimental design was used with the treatment of SPWW percentage in culture medium, namely: 100% SPWW, 75% SPWW + 25% Sea Water (SW) and 75% SW + 25% SPWW coupled with three CO₂ concentration treatments: 390?ppm, 550?ppm and 1000?ppm using CO₂ system. Growth of T. chui. for lengh of cultivation period tended to be higher at treatments of 390?ppm CO₂ and 100% SPWW, however there was a declining growth over period of cultivation for both treatments. The growth rate of T. chui was higher for all percentage of SPWW treatments in culture medium at 390?ppm CO₂ concentration compared to other percentage of SPWW treatments and CO₂ concentration treatments. There was a decreasing of growth rate with increasing CO₂ concentration at 100% SPWW and 75% SPWW + 25% SW in culture medium. Nitrogen removal efficiency and removal rate by T. chui. were strongly affected by CO₂ concentration. However, there was no significant effect of increasing CO₂ concentration to removal efficiency and rate of PO₄ by T. chui.