Quantitative trait loci (QTL) mapping of blush skin and flowering time in a European pear (<Emphasis Type="Italic">Pyrus communis</Emphasis>) progeny of ‘Flamingo’ × ‘Abate Fetel’

Blush skin and flowering time are agronomic traits of interest to the Agricultural Research Council (ARC) Infruitec-Nietvoorbij pear breeding programme. The genetic control of these traits was investigated in the pear progeny derived from ‘Flamingo’ (blush cultivar) × ‘Abate Fetel’ (slightly blush) made up of 121 seedlings. Blush skin was scored phenotypically over three seasons and flowering time was scored over two seasons. A total of 160 loci from 137 simple sequence repeat (SSR) markers were scored in the progeny and used to construct parental genetic linkage maps. Quantitative trait loci (QTL) analysis revealed two QTLs for blush skin, a major QTL on linkage group (LG) 5 in ‘Flamingo’, and a major QTL on LG9 in ‘Abate Fetel’. Two SSR markers, NB101a and SAmsCO865954, were closely linked with the major QTL on LG5 in ‘Flamingo’, with alleles 139 bp and 462 bp in coupling, respectively. These markers were present in approximately 90% of the seedlings scored as good blush (class 4) based on the average data set. These two markers were used to genotype other pear accessions to validate the QTL on LG5 with the view of marker-assisted selection. Two candidate genes, MYB86 and UDP-glucosyl transferase, were associated with the QTL on LG5 and MYB21 and MYB39 were associated with the QTL on LG9. QTL analysis for flowering time revealed a major QTL located on LG9 in both parents. Marker GD142 with allele 161 bp from ‘Flamingo’ was present in approximately 88% of the seedlings that flowered earlier than either parent, based on the average data set. The QTLs and linked markers will facilitate marker-assisted selection for the improvement of these complex traits.     

Identification of quantitative trait loci (QTL) for fruit-quality traits and number of weeks of flowering in the cultivated strawberry

Fruit quality and repeat flowering are two major foci of several strawberry breeding programs. The identification of quantitative trait loci (QTL) and molecular markers linked to these traits could improve breeding efficiency. In this work, an F₁ population derived from the cross ‘Delmarvel’ × ‘Selva’ was used to develop a genetic linkage map for QTL analyses of fruit-quality traits and number of weeks of flowering. Some QTL for fruit-quality traits were identified on the same homoeologous groups found in previous studies, supporting trait association in multiple genetic backgrounds and utility in multiple breeding programs. None of the QTL for soluble solids colocated with a QTL for titratable acids, and, although the total soluble solid contents were significantly and positively correlated with titratable acids, the correlation coefficient value of 0.2452 and independence of QTL indicate that selection for high soluble solids can be practiced independently of selection for low acidity. One genomic region associated with the total number of weeks of flowering was identified quantitatively on LG IV-S-1. The most significant marker, FxaACAO2I8C-145S, explained 43.3 % of the phenotypic variation. The repeat-flowering trait, scored qualitatively, mapped to the same region as the QTL. Dominance of the repeat-flowering allele was demonstrated by the determination that the repeat-flowering parent was heterozygous. This genomic region appears to be the same region identified in multiple mapping populations and testing environments. Markers linked in multiple populations and testing environments to fruit-quality traits and repeat flowering should be tested widely for use in marker-assisted breeding.     

Multi-environment QTL analyses for drought-related traits in a recombinant inbred population of chickpea (Cicer arientinum L.)

A recombinant inbred line (RIL) population, comprising 181 lines derived from ILC588 × ILC3279, was evaluated in 10 environments across three locations with different moisture gradients. A drought resistance score (DRS) and three phenology traits—plant height (PLHT), days to flowering (DFLR), and days to maturity (MAT)—were recorded along with seven yield-related traits—grain yield (GY), biological yield (BY), harvest index (HI), the number of pods/3 plants (Pod), percentage of empty pods (%Epod), 100 seed weight (100 sw), and seed number/3 plants (SN). Two RILs (152, 162) showed the best GYs and DRSs under stressed and non-stressed environments. The quantitative trait loci (QTLs) analyses detected 93 significant QTLs (LOD ≥ 2.0) across the genome × environment interactions. The highest phenotypic variation (>24 %) was explained by the QTL_DFLR in Terbol-11. Four common possible pleiotropic QTLs on LG3 and LG4 were identified as associated with DFLR, DRS, GY, MAT, HI, SN, and Pod. No significant epistatic interactions were found between these QTLs and the other markers. However, the QTL for DRS was detected as a conserved QTL in three late planting environments. The markers H6C-07 (on LG3) and H5G01 (on LG4) were associated with QTLs for many traits in all environments studied except two. The allele ‘A’ of marker H6C07 (from the tolerant parent ILC588) explained 80 % of the yield increase under late planting and 29.8 % of that under dry environments. Concentrating on LG3 and LG4 in molecular breeding programs for drought could speed up improvement for these traits.     

Genetic mapping and QTL analysis in European hazelnut (<Emphasis Type="Italic">Corylus avellana</Emphasis> L.)

The European hazelnut (Corylus avellana L.) is the most economically important nut species in the Betulaceae family. Despite the need for new improved hazelnut cultivars, few breeding programs are carried out because of the large plant size, the long lifecycle of the plant, and the expense and time required. To date, there are no reports of maps with quantitative trait loci (QTL) in hazelnut. Our objective in the present study was to identify QTL associated with vegetative traits to allow marker-assisted selection (MAS). An F1 progeny (275 plants) of Tonda Gentile delle Langhe × Merveille de Bollwiller obtained in 2009 was used to develop a QTL linkage map for vigour, sucker habit, and time of bud burst, after three years of observations. A set of 163 plants were analysed with 152 microsatellite markers. A map of 11 linkage groups was obtained, covering 663.1 cM, and 15 QTLs were identified and mapped for the traits examined. Of them, 10 were ‘major’ QTL, including a stably expressed region on LG_02 for leaf bud burst. At least one major QTL for each year underlies the variation in each trait and a clustering of QTL for trunk circumference and suckers/trunk circumference ratio with high inter-trait correlations was observed on LG_05, suggesting a single pleiotropic locus. This research represents an initial step in the future identification of chromosomal regions carrying genes of interest, important for breeding programs and MAS.     

Identification of genome regions controlling cotyledon,pod wall/seed coat and pod wall resistance to pea weevil through QTL mapping

Pea weevil, Bruchus pisorum, is one of the limiting factors for field pea (Pisum sativum) cultivation in the world with pesticide application the only available method for its control. Resistance to pea weevil has been found in an accession of Pisum fulvum but transfer of this resistance to cultivated pea (P. sativum) is limited due to a lack of easy-to-use techniques for screening interspecific breeding populations. To address this problem, an interspecific population was created from a cross between cultivated field pea and P. fulvum (resistance source). Quantitative trait locus (QTL) mapping was performed to discover the regions associated with resistance to cotyledon, pod wall/seed coat and pod wall resistance. Three major QTLs, located on linkage groups LG2, LG4 and LG5 were found for cotyledon resistance explaining approximately 80 % of the phenotypic variation. Two major QTLs were found for pod wall/seed coat resistance on LG2 and LG5 explaining approximately 70 % of the phenotypic variation. Co-linearity of QTLs for cotyledon and pod wall/seed coat resistance suggested that the mechanism of resistance for these two traits might act through the same pathways. Only one QTL was found for pod wall resistance on LG7 explaining approximately 9 % of the phenotypic variation. This is the first report on the development of QTL markers to probe Pisum germplasm for pea weevil resistance genes. These flanking markers will be useful in accelerating the process of screening when breeding for pea weevil resistance.     

Mapping of QTLs governing agronomic and yield traits in chickpea

Chickpea is one of the most important leguminous cool season food crops, cultivated prevalently in South Asia and Middle East. The main objective of this study was to identify quantitative trait loci (QTLs) associated with seven agronomic and yield traits in two recombinant inbred line populations of chickpea derived from the crosses JG62 × Vijay (JV population) and Vijay × ICC4958 (VI population) from at least three environments. Single locus QTL analysis involved composite interval mapping (CIM) for individual traits and multiple-trait composite interval mapping (MCIM) for correlated traits to detect pleiotropic QTLs. Two-locus analysis was conducted to identify the main effect QTLs (M-QTLs), epistatic QTLs (E-QTLs) and QTL × environment interactions. Through CIM analysis, a total of 106 significant QTLs (41 in JV and 65 in VI populations) were identified for the seven traits, of which one QTL each for plant height and days to maturity was common in both the populations. Six pleiotropic QTLs that were consistent over the environments were also identified. LG2 in JV and LG1a in VI contained at least one QTL for each trait. Hence, concentrating on these LGs in molecular breeding programs is most likely to bring simultaneous improvement in these traits.     

Quantitative trait locus (QTL) analysis of fruit-quality traits for mandarin breeding in Japan

The improvement of fruit quality is an important objective in citrus breeding. Using an F₁ segregating population from a cross between citrus cultivars ‘Harehime’ (‘E647’—‘Kiyomi’ [Citrus unshiu Marcow. ‘Miyagawa Wase’ × Citrus sinensis (L.) Osbeck ‘Trovita’] × ‘Osceola’—a cultivar of clementine [Citrus clementina hort. ex Tanaka] × ‘Orland’ [Citrus paradisi Macfad. ‘Duncan’ × Citrus tangerina hort. ex Tanaka] × ‘Miyagawa Wase’) and ‘Yoshida’ ponkan (Citrus reticulata Blanco ‘Yoshida’), a SNP-based genetic linkage map was constructed and quantitative trait locus (QTL) mapping of four fruit-quality traits (fruit weight, sugar content, peel puffing, and water rot) was performed. The constructed genetic linkage map of ‘Harehime’ consisted of 442 single nucleotide polymorphisms (SNPs) on 9 linkage groups (LGs) and covered 635.8 cM of the genome, while that of ‘Yoshida’ ponkan consisted of 332 SNPs on 9 LGs and covered 892.9 cM of its genome. We identified four QTLs associated with fruit weight, one QTL associated with sugar content, three QTLs associated with peel puffing, and one QTL associated with water rot. For these QTL regions, we estimated the haplotypes of the crossed parents and verified the founding cultivars that these QTLs were originated from and their inheritance in descendant cultivars using pedigree information. QTLs identified in this study provide useful information for marker-assisted breeding of citrus in Japan.     

Construction of the First High-Density Genetic Linkage Map and Analysis of Quantitative Trait Loci for Growth-Related Traits in <Emphasis Type="Italic">Sinonovacula constricta</Emphasis>

The razor clam (Sinonovacula constricta) is an important aquaculture species, for which a high-density genetic linkage map would play an important role in marker-assisted selection (MAS). In this study, we constructed a high-density genetic map and detected quantitative trait loci (QTLs) for Sinonovacula constricta with an F₁ cross population by using the specific locus amplified fragment sequencing (SLAF-seq) method. A total of 315,553 SLAF markers out of 467.71 Mreads were developed. The final linkage map was composed of 7516 SLAFs (156.60-fold in the parents and 20.80-fold in each F₁ population on average). The total distance of the linkage map was 2383.85 cM, covering 19 linkage groups with an average inter-marker distance of 0.32 cM. The proportion of gaps less than 5.0 cM was on average 96.90%. A total of 16 suggestive QTLs for five growth-related traits (five QTLs for shell height, six QTLs for shell length, three QTLs for shell width, one QTL for total body weight, and one QTL for soft body weight) were identified. These QTLs were distributed on five linkage groups, and the regions showed overlapping on LG9 and LG13. In conclusion, the high-density genetic map and QTLs for S. constricta provide a valuable genetic resource and a basis for MAS.     

Quantitative trait loci for agronomic traits in an elite barley population for Mediterranean conditions

Advances in plant breeding through marker-assisted selection (MAS) are only possible when genes or quantitative trait loci (QTLs) can contribute to the improvement of elite germplasm. A population of recombinant inbred lines (RILs) was developed for one of the best crosses of the Spanish National Barley Breeding Program, between two six-row winter barley cultivars Orria and Plaisant. The objective of this study was to identify favourable QTLs for agronomic traits in this population, which may help to optimise breeding strategies for these and other elite materials for the Mediterranean region. A genetic linkage map was developed for 217 RILs, using 382 single nucleotide polymorphism markers, selected from the barley oligonucleotide pool assay BOPA1 and two genes. A subset of 112 RILs was evaluated for several agronomic traits over a period of 2 years at three locations, Lleida and Zaragoza (Spain) and Fiorenzuola d’Arda (Italy), for a total of five field trials. An important segregation distortion occurred during population development in the region surrounding the VrnH1 locus. A QTL for grain yield and length of growth cycle was also found at this locus, apparently linked to a differential response of the VrnH1 alleles to temperature. A total of 33 QTLs was detected, most of them for important breeding targets such as plant height and thousand-grain weight. QTL × environment interactions were prevalent for most of the QTLs detected, although most interactions were of a quantitative nature. Therefore, QTLs suitable for MAS for most traits were identified.     

Mapping QTLs for Swimming Ability Related Traits in Cyprinus carpio L.

Body height (BH), head length (HL), snout length (SL), and tail length (TL) are important traits related with swimming ability of fish. Therefore, improving these traits will increase the production which is the basic goal of aquaculture breeding. To understand the genetic basis of swimming ability related traits in Cyprinus carpio L., a high-density linkage map spanning 3,301 cM in 50 linkage groups was utilized for quantitative trait locus (QTL) mapping. Mapping family comprised 190 offspring and 627 molecular markers were genotyped with average distance of 5.6 cM. A total of 15 QTLs including four (qBH13, qBH30, qBH33, qBH48) for BH, four (qHL10, qHL18, qHL29, qHL48) for HL, three (qSL24, qSL27, qSL45) for SL, and four (qTL15, qTL17, qTL18, qTL44) for TL were detected on 13 linkage groups LG10, LG13, LG15, LG17, LG18, LG24, LG27, LG29, LG30, LG33, LG44, LG45, and LG48. Each LG consisted on single QTL except LG18 and LG48. LG18 was found with two QTLs associated with HL and TL. While LG48 was comprised, the QTLs related with BH and HL. The phenotype variance was recorded from 12.6 to 40.6 %. Five QTLs, qHL48, qSL45, qTL15, qTL18, and qTL44, explained phenotype variance of >20 % with a significant levels of 0.047, 0.049, 0.037, 0.025, and 0.023, respectively. The neighbored loci of these QTLs were considered as main region of chromosomes controlling the traits. These identified genetic regions will be the main source of discovering gene(s) associated with swimming ability related traits in C. carpio L.     

QTL Mapping for Resistance to Iridovirus in Asian Seabass Using Genotyping-by-Sequencing

Identifying quantitative trait loci (QTL) for viral disease resistance is of particular importance in selective breeding programs of fish species. Genetic markers linked to QTL can be useful in marker-assisted selection (MAS) for elites resistant to specific pathogens. Here, we conducted a genome scan for QTL associated with Singapore grouper iridovirus (SGIV) resistance in an Asian seabass (Lates calcarifer) family, using a high-density linkage map generated with genotyping-by-sequencing. One genome-wide significant and three suggestive QTL were detected at LG21, LG6, LG13, and LG15, respectively. The phenotypic variation explained (PVE) by the four QTL ranged from 7.5 to 15.6%. The position of the most significant QTL at LG21 was located between 31.88 and 36.81 cM. The SNP marker (SNP130416) nearest to the peak of this QTL was significantly associated with SGIV resistance in an unrelated multifamily population. One candidate gene, MECOM, close to the peak of this QTL region, was predicted. Evidence of alternative splicing was observed for MECOM and one specific category of splicing variants was differentially expressed at 5 days post-SGIV infection. The QTL detected in this study are valuable resources and can be used in the selective breeding programs of Asian seabass with regard to resistance to SGIV.     

Genetic mapping of pear sawfly (<Emphasis Type="Italic">Caliroa cerasi</Emphasis>) and pear blister mite (<Emphasis Type="Italic">Eriophyes pyri</Emphasis>) resistance in an interspecific pear family

Whilst minor pests of pear, both sawfly larvae (pear slug) and pear blister mite can at times cause sufficient damage in commercial and particularly in organic pear production for treatment to be required. In the course of breeding new pear cultivars, resistance to both pests was identified in an interspecific pear family raised from a cross between ‘PremP003’ and ‘Moonglow’. The replicated seedling family was subjected to uninhibited insect development for both pests in an insect-proof cage, providing ample infestations for resistance segregation. Using an existing genetic map for the family, one major quantitative trait locus (QTL) for resistance to pear blister mite was located to linkage group 13 (LG13) of ‘PremP003’. For pear slug, we mapped three QTLs for oviposition antixenosis, one each on LG7 and LG9 of ‘Moonglow’ and another on LG10 of ‘PremP003’, and one resistance QTL for leaf damage to LG9 of ‘Moonglow’ at a distance of 8.1 cM below the oviposition QTL. Incorporating these resistances into future cultivars could contribute to a reduction in pesticide use in pear production, especially in combination with the resistances for pear psylla (Cacopsylla pyri) and fire blight (Erwinia amylovora) recently mapped in the same population using marker-assisted selection.     

Genetic analysis for physical nut traits in almond

Almond breeding is increasingly taking into account kernel quality as a breeding objective. Although information on nut and kernel physical parameters involved in almond quality has already been compiled, the genetic control of these traits has not been studied. This genetic information would improve the efficacy of almond breeding programs. A linkage map with 56 simple-sequence repeat markers was constructed for the “Vivot” × “Blanquerna” almond population showing a wide range of variability for the physical parameters of nut and kernel. A total of 14 putative quantitative trait loci (QTLs) controlling these physical traits were detected in the current study, corresponding to six genomic regions of the eight almond linkage groups (LG). Some QTLs are colocated in the same region or shared the same molecular markers, in a manner that reflects the correlations between the physical traits, as well as with the chemical components of the almond kernel. The limit of detection values for any given trait ranged from 2.06 to 5.17, explaining between 13.0 and 44.0 % of the phenotypic variance of the trait. This new genetic information needs to be taken into account when breeding for physical traits in almond. Increases in the positive quality traits, both physical and chemical, need to be considered simultaneously whenever they are genetically independent, even if they are negatively correlated. This is the first complete genetic framework map for physical components of almond nut and kernel, with 14 putative QTLs associated with a large number of parameters controlling physical traits in almond.     

Analysis of factors influencing milling yield and their association to other traits by QTL analysis in two hexaploid oat populations

Milling yield, or the grain weight from which 100 kg of rolled groats is obtained upon milling, is an important quality characteristic of cultivated oat (Avena sativa L.). Kernel morphology and the groat (caryopsis) percentage of the whole kernel including hull are factors that influence milling yield. We mapped QTLs for kernel area, kernel length, kernel width, and groat percentage in two populations of 137 recombinant inbred lines by RFLP and AFLP analysis to evaluate the prospects of marker-assisted selection (MAS). Phenotypic correlations between kernel morphology traits and groat percentage were not significant. For kernel morphology traits and groat percentage, one to five QTLs were detected, explaining 7.0–60.7% of the total phenotypic variance depending on the trait. One QTL for kernel length in each population and one QTL for kernel width in one population were found at the same location as a QTL for groat percentage, indicating that a change in kernel size or shape could have an influence on groat percentage. The positions and effects of QTLs for kernel morphology and groat percentage were compared to QTLs detected previously for chemical grain composition (oil andβ-glucanconcentration) and agronomic traits to evaluate the selection response on these traits through MAS. Several regions of the oat genome were identified that contained clusters of QTLs influencing two or more traits. While the allele from one parent at a QTL could simultaneously improve two or more traits in one population, it could have opposite effects on the same traits at another QTL or in the other population. Associations among traits were complex and will require careful consideration when employing QTL-marker associations in MAS to avoid negative selection response. Future research to discover candidate genes for those QTL clusters could provide information about trait associations and help in designing selection programs. Received: 17 February 2000 / Accepted: 27 October 2000     

A QTL detected in an interspecific pear population confers stable fire blight resistance across different environments and genetic backgrounds

Fire blight, caused by the bacterium Erwinia amylovora (Burrill) Winslow et al., is one of the most serious diseases of pear. The development of pear cultivars with a durable resistance is extremely important for effective control of fire blight and is a key objective of most pear breeding programs throughout the world. We phenotyped seedlings from the interspecific pear population PEAR3 (PremP003, P. × bretschneideri × P. communis) × ‘Moonglow’ (P. communis) for fire blight resistance at two different geographic locations, in France and New Zealand, respectively, employing two local E. amylovora isolates. Using a genetic map constructed with single nucleotide polymorphism (SNP) and microsatellite (SSR) markers previously developed for this segregating population, we detected a major quantitative trait locus (QTL) on linkage group (LG)2 of ‘Moonglow’ (R ² = 12.9–34.4 %), which was stable in both environments. We demonstrated that this QTL co-localizes with another major QTL for fire blight resistance previously detected in ‘Harrow Sweet’ and that the two favorable (i.e., resistant) alleles were not identical by descent. We also identified some smaller effect (R ² = 8.1–14.8 %) QTLs derived from the susceptible parent PEAR3. We propose SNP and SSR markers linked to the large effect QTL on LG2 as candidates for marker-assisted breeding for fire blight resistance in pear.     

Linkage analysis and identification of quantitative trait loci associated with freeze tolerance and turf quality traits in St. Augustinegrass

St. Augustinegrass [Stenotaphrum secundatum (Walt.) Kuntze] is a warm-season turfgrass commonly grown in the southern USA. In this study, the first linkage map for all nine haploid chromosomes of the species was constructed for cultivar ‘Raleigh’ and cultivar ‘Seville’ using a pseudo-F₂ mapping strategy. A total of 160 simple sequence repeat markers were mapped to nine linkage groups (LGs) covering a total distance of 1176.24 cM. To demonstrate the usefulness of the map, quantitative trait loci (QTL) were mapped controlling field winter survival, laboratory-based freeze tolerance, and turf quality traits. Multiple genomic regions associated with these traits were identified. Moreover, overlapping QTL were found for winterkill and spring green up on LG 3 (99.21 cM); turf quality, turf density, and leaf texture on LG 3 (68.57–69.50 cM); and surviving green tissue and regrowth on LGs 1 (38.31 cM), 3 (77.70 cM), 6 (49.51 cM), and 9 (34.20 cM). Additional regions, where QTL identified in both field and laboratory-based/controlled environment freeze testing co-located, provided strong support that these regions are good candidates for true gene locations. These results present the first complete linkage map produced for St. Augustinegrass, providing a template for further genetic mapping. Additionally, markers linked to the QTL identified may be useful to breeders for transferring these traits into new breeding lines and cultivars.     

Effect of Inoculum Density on Verticillium Wilt Incidence in Commercial Olive Orchards

Verticillium wilt, caused by Verticillium dahliae Kleb., is presently the most destructive disease of olive, particularly in Andalucía (southern Spain). ‘Picual’ and ‘Arbequina’ are the dominant cultivars being planted in Spain. Both cultivars are highly susceptible to the defoliating pathotype of V. dahliae when artificially inoculated by root‐dipping or stem injection. Conversely, ‘Arbequina’ is considered more resistant than ‘Picual’ based on field observations and farmer's experience. In this study, the differential reaction between of cultivars was confirmed by surveys of naturally infested orchards with different inoculum densities of the pathogen. The average percentage of affected olive trees of ‘Picual’ was 60.2%, while only 13.1% of trees of ‘Arbequina’ showed disease symptoms. Overall, the pathogen caused extensive wilting of branches and defoliation on the trees of ‘Picual’, whereas ‘Arbequina’‐infected trees showed chlorotic symptoms and slight defoliation. The relationship between inoculum density and disease incidence fit a logarithmic function for both cultivars. The percentage of affected trees of ‘Arbequina’ per year increased linearly (y = 0.3559x, R² = 0.5652, and P = 0.0195) with the inoculum density in the soil, whereas this relationship was not observed for the ‘Picual’. Planting density had no effect on disease incidence for any of the two cultivars.     

Introgression of homeologous quantitative trait loci (QTLs) for resistance to the root-knot nematode [Meloidogyne arenaria (Neal) Chitwood] in an advanced backcross-QTL population of peanut (Arachis hypogaea L.)

Resistance to root-knot nematodes [Meloidogyne arenaria (Neal) Chitwood] is needed for cultivation of peanut in major peanut-growing areas, but significant resistance is lacking in the cultivated species (Arachis hypogaea L.). Markers to two closely-linked genes introgressed from wild relatives of peanut have been identified previously, but phenotypic evidence for the presence of additional genes in wild species and introgression lines has eluded quantitative trait locus (QTL) identification. Here, to improve sensitivity to small-effect QTLs, an advanced backcross population from a cross between a Florunner component line and the synthetic amphidiploid TxAG-6 [Arachis batizocoi × (A. cardenasii × A. diogoi)]^4× was screened for response to root-knot nematode infection. Composite interval mapping results suggested a total of seven QTLs plus three putative QTLs. These included the known major resistance gene plus a second QTL on LG1, and a potentially homeologous B-genome QTL on LG11. Additional potential homeologs were identified on linkage group (LG) 8 and LG18, plus a QTL on LG9.2 and putative QTLs on LG9.1 and 19. A QTL on LG15 had no inferred resistance-associated homeolog. Contrary to expectation, two introgressed QTLs were associated with susceptibility, and QTLs at some homeologous loci were found to confer opposite phenotypic responses. Long-term functional conservation accompanied by rapid generation of functionally divergent alleles may be a singular feature of NBS-LRR resistance gene clusters, contributing to the richness of resistance alleles available in wild relatives of crops. The significance for peanut evolution and breeding is discussed.     

Genetic mapping of QTLs for sugar-related traits in a RIL population of Sorghum bicolor L. Moench

The productivity of sorghum is mainly determined by quantitative traits such as grain yield and stem sugar-related characteristics. Substantial crop improvement has been achieved by breeding in the last decades. Today, genetic mapping and characterization of quantitative trait loci (QTLs) is considered a valuable tool for trait enhancement. We have investigated QTL associated with the sugar components (Brix, glucose, sucrose, and total sugar content) and sugar-related agronomic traits (flowering date, plant height, stem diameter, tiller number per plant, fresh panicle weight, and estimated juice weight) in four different environments (two locations) using a population of 188 recombinant inbred lines (RILs) from a cross between grain (M71) and sweet sorghum (SS79). A genetic map with 157 AFLP, SSR, and EST-SSR markers was constructed, and several QTLs were detected using composite interval mapping (CIM). Further, additive × additive interaction and QTL × environmental interaction were estimated. CIM identified more than five additive QTLs in most traits explaining a range of 6.0–26.1% of the phenotypic variation. A total of 24 digenic epistatic locus pairs were identified in seven traits, supporting the hypothesis that QTL analysis without considering epistasis can result in biased estimates. QTLs showing multiple effects were identified, where the major QTL on SBI-06 was significantly associated with most of the traits, i.e., flowering date, plant height, Brix, sucrose, and sugar content. Four out of ten traits studied showed a significant QTL × environmental interaction. Our results are an important step toward marker-assisted selection for sugar-related traits and biofuel yield in sorghum.     

Molecular Mapping and Characterization of Genes Governing Time to Flowering, Seed Weight, and Plant Height in an Intraspecific Genetic Linkage Map of Chickpea (Cicer arietinum)

Drought is the major constraint to chickpea productivity worldwide. Utilizing early flowering genotypes and larger seed size have been suggested as strategies for breeding in drought zones. Therefore, this study aimed to identify potential markers linked to days-to-flowering, 100-seed weight, and plant height in a chickpea intraspecific F_2:3 population derived from the cross ILC3279 × ICCV2. A closely linked marker (TA117) on linkage group LG3 was identified for the days-to-flowering trait, explaining 33% of the variation. In relation to plant height, a quantitative trait loci (QTL) was located in LG3, close to the Ts5 marker, that explained 29% of phenotypic variation. A QTL for 100-seed weight located in LG4, close to TA176, explained 51% of variation. The identification of a locus linked both to high 100-seed weight and days-to-flowering may account for the correlation observed between these traits in this and other breeding attempts.