Multiple independent defective suppressor-mutator transposon insertions in Arabidopsis: a tool for functional genomics.

A new system for insertional mutagenesis based on the maize Enhancer/Suppressor-mutator (En/Spm) element was introduced into Arabidopsis. A single T-DNA construct carried a nonautonomous defective Spm (dSpm) element with a phosphinothricin herbicide resistance (BAR) gene, a transposase expression cassette, and a counterselectable gene. This construct was used to select for stable dSpm transpositions. Treatments for both positive (BAR) and negative selection markers were applicable to soil-grown plants, allowing the recovery of new transpositions on a large scale. To date, a total of 48,000 lines in pools of 50 have been recovered, of which approximately 80% result from independent insertion events. DNA extracted from these pools was used in reverse genetic screens, either by polymerase chain reaction (PCR) using primers from the transposon and the targeted gene or by the display of insertions whereby inverse PCR products of insertions from the DNA pools are spotted on a membrane that is then hybridized with the probe of interest. By sequencing PCR-amplified fragments adjacent to insertion sites, we established a sequenced insertion-site database of 1200 sequences. This database permitted a comparison of the chromosomal distribution of transpositions from various T-DNA locations.     

Hop,an active Mutator-like element in the genome of the fungus Fusarium oxysporum

A new type of active DNA transposon has been identified in the genome of Fusarium oxysporum by its transposition into the niaD target gene. Two insertions within the final exon, in opposite orientations at the same nucleotide site, have been characterized. These elements, called Hop, are 3,299 bp long, with perfect terminal inverted repeats (TIRs) of 99 bp. The sequencing of genomic copies reveals a 9-bp target site duplication and no apparent sequence specificity at the insertion sites. The sequencing of a cDNA indicates that Hop does not contain an intron and encodes a putative transposase of 836 amino acids. The structural features (length, TIRs size, and 9-bp duplication), together with the presence of conserved domains in the transposase, strongly suggest that Hop is a Mutator-like element (MULE). Hop is thus the first active member of this family found beyond plants. The high rate of excision observed indicates that Hop is very active and thus represents a promising efficient tagging system for the isolation of fungal genes. The distribution of Hop elements within the Fusarium genus revealed that they are present in different species, suggesting that related elements could be present in other fungal genomes. In fact, Hop-related sequences have been identified in the survey of the entire genome sequence of three other ascomycetes, Magnaporthe grisea, Neurospora crassa, and Aspergillus fumigatus.     

En/Spm-like transposons in Poaceae species: transposase sequence variability and chromosomal distribution

Belonging to Class II of transposable elements, En/Spm transposons are widespread in a variety of distantly related plant species. Here, we report on the sequence conservation of the transposase region from sequence analyses of En/Spm-like transposons from Poaceae species, namely Zingeria biebersteiniana, Zingeria trichopoda, Triticum monococcum, Triticum urartu, Hordeum spontaneum, and Aegilops speltoides. The transposase region of En/Spm-like transposons was cloned, sequenced, and compared with equivalent regions of Oryza and Arabidopsis from the gene bank database. Southern blot analysis indicated that the En/Spm transposon was present in low (Hordeum spontaneum, Triticum monococcum, Triticum urartu) through medium (Zingeria bieberstiana, Zingeria trichopoda) to relatively high (Aegilops speltoides) copy numbers in Poaceae species. A cytogenetic analysis of the chromosomal distribution of En/Spm transposons revealed the concurence of the chromosomal localization of the En/Spm clusters with mobile clusters of rDNA. An analysis of En/Spm-like transposase amino acid sequences was carried out to investigate sequence divergence between 5 genera--Triticum, Aegilops, Zingeria, Oryza and Arabidopsis. A distance matrix was generated; apparently, En/Spm-like transposase sequences shared the highest sequence homology intra-generically and, as expected, these sequences were significantly diverged from those of O. sativa and A. thaliana. A sequence comparison of En/Spm-like transposase coding regions defined that the intra-genomic complex of En/Spm-like transposons could be viewed as relatively independent, vertically transmitted, and permanently active systems inside higher plant genomes. The sequence data from this article was deposited in the EMBL/GenBank Data Libraries under the accession nos. AY707995-AY707996-AY707997-AY707998-AY707999-AY708000-AY708001-AY708002-AY708003-AY708004-AY708005-AY708005-AY265312.     

New transposable elements identified as insertions in rice transposon Tnr1

Tnr1 (235 bp long) is a transposable element in rice. Polymerase chain reactions (PCRs) done with a primer(s) that hybridizes to terminal inverted repeat sequences (TIRs) of Tnr1 detected new Tnr1 members with one or two insertions in rice genomes. Six identified insertion sequences (Tnr4, Tnr5, Tnr11, Tnr12, Tnr13 and RIRE9) did not have extensive homology to known transposable elements, rather they had structural features characteristic of transposable elements. Tnr4 (1767 bp long) had imperfect 64-bp TIRs and appeared to generate duplication of a 9-bp sequence at the target site. However, the TIR sequences were not homologous to those of known transposable elements, indicative that Tnr4 is a new transposable element. Tnr5 (209 bp long) had imperfect 46-bp TIRs and appeared to generate duplication of sequence TTA like that of some elements of the Tourist family. Tnr11 (811 bp long) had 73-bp TIRs with significant homology to those of Tnr1 and Stowaway and appeared to generate duplication of sequence TA, indicative that Tnr11 is a transposable element of the Tnr1/Stowaway family. Tnr12 (2426 bp long) carried perfect 9-bp TIRs, which began with 5'-CACTA- -3' from both ends and appeared to generate duplication of a 3-bp target sequence, indicative that Tnr12 is a transposable element of the En/Spm family. Tnr13 (347 bp long) had 31-bp TIRs and appeared to generate duplication of an 8-bp target sequence. Two sequences, one the transposon-like element Crackle, had partial homology in the Tnr13 ends. All five insertions appear to be defective elements derived from autonomous ones encoding the transposase gene. All had characteristic tandem repeat sequences which may be recognized by transposase. The sixth insertion sequence, named RIRE9 (3852 bp long), which begins with 5'-TG- -3' and ends with 5'- -CA-3', appeared to generate duplication of a 5-bp target sequence. These and other structural features indicate that this insertion is a solo LTR (long terminal repeat) of a retrotransposon. The transposable elements described above could be identified as insertions into Tnr1, which do not deleteriously affect the growth of rice cells.     

Tn10 transposase mutants with altered transpososome unfolding properties are defective in hairpin formation

Transposition reactions take place in the context of higher-order protein-DNA complexes called transpososomes. In the Tn10 transpososome, IHF binding to an "outside end" creates a bend in the DNA that allows the transposase protein to contact the end at two different sites, the terminal and subterminal binding sites. Presumably this helps to stabilize the transposase-end interaction. However, the DNA loop that is formed must be unfolded at a later stage in order for the transposon to integrate into other DNA molecules. It has been proposed that transpososome unfolding also plays a role in transposon excision. To investigate this possibility further, we have isolated and characterized transposase mutants with altered transpososome unfolding properties. Two such mutants were identified, R182A and R184A. Both mutants fail to carry out hairpin formation, an intermediate step in transposon excision, specifically with outside end-containing substrates. These results support the idea that transpososome unfolding and excision are linked. Also, based on the importance of residues R182 and R184 in transpososome unfolding, we propose a new model for the Tn10 transpososome, wherein both DNA ends of the transpososome make subterminal contacts with transposase.     

Identification of differentially regulated francisella tularensis genes by use of a newly developed Tn5-based transposon delivery system

Francisella tularensis is the etiologic agent of an intracellular systemic infection of the lymphatic system in humans called tularemia. The organism has become the subject of considerable research interest due to its classification as a category A select agent by the CDC. To aid genetic analysis of this pathogen, we have constructed a temperature-sensitive Tn5-based transposon delivery system that is capable of generating chromosomal reporter fusions with lacZ or luxCDABE, enabling us to monitor gene expression. Transposition is catalyzed by the hyperactive Tn5 transposase, whose expression is driven by the Francisella groES promoter. When high-temperature selection (42 degrees C) is applied to a bacterial culture carrying the transposon delivery plasmid, approximately 0.1% of the population is recovered with Tn5 insertions in the chromosome. Nucleotide sequence analysis of a sample of mutants revealed that the insertions occur randomly throughout the chromosome. The kanamycin-selectable marker of the transposon is also flanked by FLP recombination target sequences that allow deletion of the antibiotic resistance gene when desired. This system has been used to generate transposon mutant libraries for the F. tularensis live vaccine strain as well as two different virulent F. tularensis strains. Chromosomal reporters delivered with the transposon were used to identify genes upregulated by growth in Chamberlain's defined medium. Genes in the fsl operon, reported to be involved in iron acquisition, as well as genes in the igl gene cluster were among those identified by the screen. Further experiments implicate the ferric uptake regulator (Fur) protein in the negative regulation of fsl but not igl reporters, which occurs in an iron-dependent manner. Our results indicate that we have created a valuable new transposon that can be used to identify and characterize virulence genes in F. tularensis strains.     

Genetic analysis of pigment biosynthesis in Xanthobacter autotrophicus Py2 using a new,highly efficient transposon mutagenesis system that is functional in a wide variety of bacteria

A highly efficient method of transposon mutagenesis was developed for genetic analysis of Xanthobacter autotrophicus Py2. The method makes use of a transposon delivery vector that encodes a hyperactive Tn 5 transposase that is 1,000-fold more active than the wild-type transposase. In this construct, the transposase is expressed from the promoter of the tetA gene of plasmid RP4, which is functional in a wide variety of organisms. The transposon itself contains a kanamycin resistance gene as a selectable marker and the origin of replication from plasmid R6K to facilitate subsequent cloning of the resulting insertion site. To test the effectiveness of this method, mutants unable to produce the characteristic yellow pigment (zeaxanthin dirhamnoside) of X. autotrophicus Py2 were isolated and analyzed. Transposon insertions were obtained at high frequency: approximately 1 x 10(-3) per recipient cell. Among these, pigment mutants were observed at a frequency of approximately 10(-3). Such mutants were found to have transposon insertions in genes homologous to known carotenoid biosynthetic genes previously characterized in other pigmented bacteria. Mutants were also isolated in Pseudomonas stutzeri and in an Alcaligenes faecalis, demonstrating the effectiveness of the method in diverse Proteobacteria. Preliminary results from other laboratories have confirmed the effectiveness of this method in additional phylogenetically diverse species.     

Identification of multiple binding sites for the THAP domain of the Galileo transposase in the long terminal inverted-repeats

Galileo is a DNA transposon responsible for the generation of several chromosomal inversions in Drosophila. In contrast to other members of the P-element superfamily, it has unusually long terminal inverted-repeats (TIRs) that resemble those of Foldback elements. To investigate the function of the long TIRs we derived consensus and ancestral sequences for the Galileo transposase in three species of Drosophilids. Following gene synthesis, we expressed and purified their constituent THAP domains and tested their binding activity towards the respective Galileo TIRs. DNase I footprinting located the most proximal DNA binding site about 70 bp from the transposon end. Using this sequence we identified further binding sites in the tandem repeats that are found within the long TIRs. This suggests that the synaptic complex between Galileo ends may be a complicated structure containing higher-order multimers of the transposase. We also attempted to reconstitute Galileo transposition in Drosophila embryos but no events were detected. Thus, although the limited numbers of Galileo copies in each genome were sufficient to provide functional consensus sequences for the THAP domains, they do not specify a fully active transposase. Since the THAP recognition sequence is short, and will occur many times in a large genome, it seems likely that the multiple binding sites within the long, internally repetitive, TIRs of Galileo and other Foldback-like elements may provide the transposase with its binding specificity.     

Efficient Identification of Arabidopsis Knock-Out Mutants Using DNA-Arrays of Transposon Flanking Sequences

Abstract: Mutants obtained by insertional mutagenesis are widely used for determining gene-phenotype relationships. In Arabidopsis thaliana, several populations mutagenized either by T-DNA or transposon insertion are available for screening for knockout mutants in genes of interest. We have so far screened our Arabidopsis population mutagenized with the Zea mays transposon En-1/Spm for insertion mutations in 718 genes, using PCR on DNA pools. Although successful, this common approach is too time consuming for use in systematic screening of all 25 498 predicted genes of the Arabidopsis genome. We therefore investigated the use of DNA arrays for the direct identification of mutants in our population. All transposon-flanking regions from individual plants are amplified by PCR and subsequently spotted at high density onto nylon membranes. A single hybridization experiment with a gene-specific probe then allows one to identify candidate mutant plants. The efficiency of each separate step was determined and optimized. Screening of filters representing 2880 plants for insertions in 144 genes and subsequent investigation of some of the potential insertion mutants suggest that an overall screening efficiency of 50 % is attained.     

Transposon-tagging identifies novel pathogenicity genes in Fusarium graminearum

With the increase of sequenced fungal genomes, high-throughput methods for functional analyses of genes are needed. We assessed the potential of a new transposon mutagenesis tool deploying a Fusarium oxysporum miniature inverted-repeat transposable element mimp1, mobilized by the transposase of impala, a Tc1-like transposon, to obtain knock-out mutants in Fusarium graminearum. We localized 91 mimp1 insertions which showed good distribution over the entire genome. The main exception was a major hotspot on chromosome 2 where independent insertions occurred at exactly the same nucleotide position. Furthermore insertions in promoter regions were over-represented. Screening 331 mutants for sexual development, radial growth and pathogenicity on wheat resulted in 19 mutants (5.7%) with altered phenotypes. Complementation with the original gene restored the wild-type phenotype in two selected mutants demonstrating the high tagging efficiency. This is the first report of a MITE transposon tagging system as an efficient mutagenesis tool in F. graminearum.     

Tipping the balance between replicative and simple transposition

The bacterial insertion sequence IS903 has the unusual ability to transpose both replicatively and non-replicatively. The majority of products are simple insertions, while co-integrates, the product of replicative transposition, occur at a low frequency (<0.1% of simple insertions). In order to define the critical steps that determine the outcome of IS903 transposition, we have isolated mutants that specifically increase the rate of replicative transposition. Here we show that the nucleotide immediately flanking the transposon influences both overall transposition frequency and co-integrate formation. In particular, when the 3'-flanking nucleotide is A, co-integrates are increased 500-fold compared with a 3' C. In addition, we have isolated five transposase mutants that increase replicative transposition. These residues are close to the catalytic residues and are thus likely to be part of the active site. These are the first transposase mutations described that affect the product of transposition. Our results are consistent with the hypothesis that a delay in cleavage of the 5'-flanking DNA will increase the effective half-life of the 3'-nicked transposon intermediate and consequently enhance co-integrate formation.     

Structure and evolution of the hAT transposon superfamily.

The maize transposon Activator (Ac) was the first mobile DNA element to be discovered. Since then, other elements were found that share similarity to Ac, suggesting that it belongs to a transposon superfamily named hAT after hobo from Drosophila, Ac from maize, and Tam3 from snapdragon. We addressed the structure and evolution of hAT elements by developing new tools for transposon mining and searching the public sequence databases for the hallmarks of hAT elements, namely the transposase and short terminal inverted repeats (TIRs) flanked by 8-bp host duplications. We found 147 hAT-related sequences in plants, animals, and fungi. Six conserved blocks could be identified in the transposase of most hAT elements. A total of 41 hAT sequences were flanked by TIRs and 8-bp host duplications and, out of these, 34 sequences had TIRs similar to the consensus determined in this work, suggesting that they are active or recently active transposons. Phylogenetic analysis and clustering of hAT sequences suggest that the hAT superfamily is very ancient, probably predating the plant-fungi-animal separation, and that, unlike previously proposed, there is no evidence that horizontal gene transfer was involved in the evolution of hAT elements.     

Transposition and gene disruption in the male germline of the mouse

We have tested a synthetic, functional, transposon called Sleeping Beauty for use in mice as a germline insertional mutagen. We describe experiments in which mutagenic, polyadenylation‐site trapping, transposon vectors were introduced into the germline of mice. When doubly transgenic males, expressing the Sleeping Beauty transposase gene (SB10) and harboring poly(A)‐trap transposon vectors, were outcrossed to wild‐type females, offspring were generated with new transposon insertions. The frequency of new transposon insertion is roughly two per male gamete. These new insertions can be passed through the germline to the next generation and can insert into or near genes. We have generated a preliminary library of 24 mice harboring 56 novel insertion sites, including one insertion into a gene represented in the EST database and one in the promoter of the galactokinase (Gck) gene. This technique has promise as a new strategy for forward genetic screens in the mouse or functional genomics. genesis 30:82–88, 2001. © 2001 Wiley‐Liss, Inc.     

Identification of cold shock gene loci in Sinorhizobium meliloti by using a luxAB reporter transposon

Using a luxAB reporter transposon, seven mutants of Sinorhizobium meliloti were identified as containing insertions in four cold shock loci. LuxAB activity was strongly induced (25- to 160-fold) after a temperature shift from 30 to 15 degrees C. The transposon and flanking host DNA from each mutant was cloned, and the nucleic acid sequence of the insertion site was determined. Unexpectedly, five of the seven luxAB mutants contained transposon insertions in the 16S and 23S rRNA genes of two of the three rrn operons of S. meliloti. Directed insertion of luxAB genes into each of the three rrn operons revealed that all three operons were similarly affected by cold shock. Two other insertions were found to be located downstream of a homolog of the major Escherichia coli cold shock gene, cspA. Although the cold shock loci were highly induced in response to a shift to low temperature, none of the insertions resulted in a statistically significant decrease in growth rate at 15 degrees C.     

乔丹基因:在团藻中发现的跳跃基因

Ｄａｖｉｄ Ｋｉｒｋ 和 Ｓｔｅｐｈｅｎ Ｍ ｉｌｌｅｒ 最近用一种特殊的转座子 乔丹基因作为标记克隆了两个控制团藻发育的重要基因：ｇｌｓ Ａ 基因和 ｒｅｇ Ａ 基因⒚他们的这一工作可能为遗传学研究开辟了一条新的道路⒚