Amphiphilic polybetaines: the effect of side-chain hydrophobicity on protein adsorption

Novel amphiphilic polybetaines were synthesized and used as the base material for nonfouling coatings. The amphiphilicity of these polybetaines was systematically tuned by coupling chains of increasing hydrophobicity to the zwitterionic functionality side at the repeat unit level. An oligoethylene glycol (OEG) moiety was selected to yield the most hydrophilic coating, while octyl (C(8)) and fluorinated (F) groups were used to impart lipophilicity and lipophobicity to the coatings, respectively. This unique design allowed us to investigate the effect of the lipophilicity/lipophobicity of the side chain on the nonfouling properties of these zwitterionic systems. Adsorption studies, performed using six different proteins, showed that the fluorinated polybetaine, Poly[NFZI-co-NSi], resisted nonspecific adsorption as effectively as, and in some cases even better than, the most hydrophilic Poly[NOEGZI-co-NSi] coating. The comparison of Poly[NFZI-co-NSi] to its noncharged analog demonstrated the essential nature of the zwitterionic functionality in imparting nonfouling character to the coating.     

Dual-functional biomimetic materials: nonfouling poly(carboxybetaine) with active functional groups for protein immobilization

We introduce a dual-functional biocompatible material based on zwitterionic poly(carboxybetaine methacrylate) (polyCBMA), which not only highly resists protein adsorption/cell adhesion, but also has abundant functional groups convenient for the immobilization of biological ligands, such as proteins. The dual-functional properties are unique to carboxybetaine moieties and are not found in other nonfouling moieties such as ethylene glycol, phosphobetaine, and sulfobetaine. The unique properties are demonstrated in this work by grafting a polyCBMA polymer onto a surface or by preparing a polyCBMA-based hydrogel. PolyCBMA brushes with a thickness of 10-15 nm were grafted on a gold surface using the surface-initiated atom transfer radical polymerization method. Protein adsorption was analyzed using a surface plasmon resonance sensor. The surface grafted with polyCBMA very largely prevented the nonspecific adsorption of three test proteins, that is, fibrinogen, lysozyme, and human chorionic gonadotropin (hCG). The immobilization of anti-hCG on the surface resulted in the specific binding of hCG while maintaining a high resistance to nonspecific protein adsorption. Transparent polyCBMA-based hydrogel disks were decorated with immobilized fibronectin. Aortic endothelial cells did not bind to the polyCBMA controls, but appeared to adhere well and spread on the fibronectin-modified surface. With their dual functionality and biomimetic nature, polyCBMA-based materials are very promising for their applications in medical diagnostics, biomaterials/tissue engineering, and drug delivery.     

Nonfouling behavior of polycarboxybetaine-grafted surfaces: structural and environmental effects

Zwitterionic carboxybetaine (CB) has unique dual functionality for ligand immobilization on a nonfouling background. The properties of CB groups depend on their spacer groups between the positive quaternary amine groups and the negative carboxyl groups and environmental factors (e.g., ionic strengths and pH values). In this work, five polycarboxybetaines were prepared, including one polycarboxybetaine methacrylate (polyCBMA) and four polycarboxybetaine acrylamides (polyCBAAs) with different spacer groups. The polymers were grafted from a gold surface covered with initiators using surface-initiated atom transfer radical polymerization. Fibrinogen adsorption was measured as a function of ionic strengths and pH values using surface plasmon resonance sensors. The responsive protein adsorption on four polyCBAAs was mapped out. Results show that most of these surfaces exhibit high protein resistance in a wide range of ionic strengths and are more effective than zwitterionic self-assembled monolayers. Although protein adsorption tends to increase at low ionic strength and low pH value, it is still very low for polycarboxybetaines with a methylene, an ethylene, or a propylene spacer group but is more evident for polyCBAA with a longer spacer group (i.e., a pentene group). The response to ionic strengths and pH values can be attributed to the antipolyelectrolyte and protonation/deprotonation properties of polycarboxybetaines, respectively. Both of these properties are related to the spacer groups of CBs.     

Dynamics of complex formation between biological and luminescent conjugated polyelectrolytes--a surface plasmon resonance study

A water-soluble polythiophene, POWT, with zwitterionic peptide like side chains possess good characteristics for biosensor applications. The zwitterionic side chains of the polymer can couple to biomolecules via electrostatic and hydrogen bonding. This creates possibilities to imprint biomolecules to spin-coated polymer films with maintained functionality, and use the resulting matrix as a biosensor. Polymer-biomolecular interaction studies done with surface plasmon resonance (SPR) reveal a well performing sensor matrix with high affinity for DNA hybridizations as well as for protein detection. The responses are distinct and very specific. A directional dependence of antibodies binding to POWT layer has also been observed. The polymer films have also been characterized by optical methods. Emission and absorption measurements in different buffer systems confirm that the polymer matrix can undergo structural and conformational changes on surfaces. The dielectric function in the interval 300-800 nm of POWT is reported, based on variable angle spectroscopic ellipsometry. This modeling reveals that a considerable amount of water is included in the material. The polymer layer possesses the characteristics needed for biochip applications and micro array techniques.     

Suppressing surface reconstruction of superhydrophobic PDMS using a superhydrophilic zwitterionic polymer

Poly(dimethyl siloxane) (PDMS) is extensively used for biomedical applications due to its low cost, ease of fabrication, high durability and flexibility, oxygen permeability, and self-healing properties. PDMS, however, has some significant drawbacks. PDMS endures unacceptably high levels of nonspecific protein fouling when used with biological samples due to its superhydrophobic characteristics. Unfortunately, conventional surface modification methods do not work for PDMS due to its low glass transition temperature. This phenomenon has been well-known for years as "hydrophobic regeneration". For the same reason, it is also very difficult to bring functionalities onto PDMS surfaces. Herein, we demonstrate how a superhydrophilic zwitterionic material, poly(carboxybetaine methacrylate) (pCBMA), can provide a highly stable coating with long-term stabilty due to the sharp contrast in hydrophobicity between pCBMA and PDMS. This material is able to suppress nonspecific protein adsorption in complex media and functionalize desired biomolecules needed in applications, such as diagnostics, without sacrificing its nonfouling characteristics.     

Dry film refractive index as an important parameter for ultra-low fouling surface coatings

Here we demonstrate that the film refractive index (RI) can be an even more important parameter than film thickness for identifying nonfouling polymer films to undiluted human blood plasma and serum. The film thickness and RI are two parameters obtained from ellipsometry. Previously, film thickness has been correlated to ultra-low fouling properties. Practically, the film RI can be used to characterize polymer density but is often overlooked. By varying the water content in the surface-initiated atom transfer radical polymerization of zwitterionic carboxybetaine, a minimum of ～1.5 RI units was necessary to achieve <5 ng/cm(2) of adsorption from undiluted human serum. A model of the film structure versus water content was also developed. These results point to an important parameter and simple approach for identifying surface coatings suitable for real-world applications involving complex media. Therefore, ultra-low fouling using a thin film is possible if it is densely packed.     

Poly(ethylene oxide) layers grafted to dopamine-melanin anchoring layer: stability and resistance to protein adsorption

In this study, we propose substrate-independent modification for creating a protein-repellent surface based on dopamine-melanin anchoring layer used for subsequent binding of poly(ethylene oxide) (PEO) from melt. We verified that the dopamine-melanin layer can be formed on literally any substrate and could serve as the anchoring layer for subsequent grafting of PEO chains. Grafting of PEO from melt in a temperature range 70-110 °C produces densely packed PEO layers showing exceptionally low protein adsorption when exposed to the whole blood serum or plasma. The PEO layers prepared from melt at 110 °C retained the protein repellent properties for as long as 10 days after their exposure to physiological-like conditions. The PEO-dopamine-melanin modification represents a simple and universal surface modification method for the preparation of protein repellent surfaces that could serve as a nonfouling background in various applications, such as optical biosensors and tissue engineering.     

Surface PEGylation via native chemical ligation

Native chemical ligation (NCL) is an emerging chemoselective chemistry that forms an amide bond by trans-thioesterification followed by intramolecular nucleophilic rearrangement between thioester and cysteine. The reaction is simple, occurs in a mild aqueous solution, and gives near-quantitative yields of a desired product. Since the first report in 1994, most studies involving the use of NCL have focused on the total synthesis of proteins to address fundamental questions pertaining to many aspects of protein science, such as folding, mirror images, and site-specific labeling of proteins, but applications of the NCL reaction for other areas remain largely unexplored. Herein, we present a facile strategy for surface immobilization of poly(ethylene glycol) (PEG) utilizing the NCL reaction. Surface immobilization of PEG (i.e., PEGylation) plays a key role in preventing nonspecific protein adsorption on surfaces, which is crucial in a wide variety of medical devices. Using cysteine-PEG and thioester-containing phosphonic acid conjugates, we achieved efficient surface PEGylation on titanium surfaces. Ellipsometry, goniometry, and X-ray photoelectron spectroscopy (XPS) unambiguously confirmed the presence of PEGs, which provided nonfouling effects of surfaces. This study indicates that the NCL reaction will be a useful toolkit for surface bioconjugation and functionalization.     

Functional polymer brushes via surface-initiated atom transfer radical graft polymerization for combating marine biofouling

Dense and uniform polymer brush coatings were developed to combat marine biofouling. Nonionic hydrophilic, nonionic hydrophobic, cationic, anionic and zwitterionic polymer brush coatings were synthesized via surface-initiated atom transfer radical polymerization (SI-ATRP) of 2-hydroxyethyl methacrylate, 2,3,4,5,6-pentafluorostyrene, 2-(methacryloyloxy)ethyl trimethylammonium chloride, 4-styrenesulfonic acid sodium and N,N'-dimethyl-(methylmethacryloyl ethyl) ammonium propanesulfonate, respectively. The functionalized surfaces had different efficacies in preventing adsorption of bovine serum albumin (BSA), adhesion of the Gram-negative bacterium Pseudomonas sp. NCIMB 2021 and the Gram-positive Staphylococcus aureus, and settlement of cyprids of the barnacle Amphibalanus amphitrite (=Balanus amphitrite). The nonionic hydrophilic, anionic and zwitterionic polymer brushes resisted BSA adsorption during a 2?h exposure period. The nonionic hydrophilic, cationic and zwitterionic brushes exhibited resistance to bacterial fouling (24?h exposure) and cyprid settlement (24 and 48?h incubation). The hydrophobic brushes moderately reduced protein adsorption, and bacteria and cyprid settlement. The anionic brushes were least effective in preventing attachment of bacteria and barnacle cyprids. Thus, the best approach to combat biofouling involves a combination of nonionic hydrophilic and zwitterionic polymer brush coatings on material surfaces.     

Stability and nonfouling properties of poly(poly(ethylene glycol) methacrylate) brushes under cell culture conditions

This paper investigates the stability and nonfouling properties of poly(poly(ethylene glycol) methacrylate) (PPEGMA) brushes prepared by surface-initiated atom transfer radical polymerization from SiO(x) substrates modified with a trimethoxysilane-based ATRP initiator. At high chain densities, PPEGMA brushes were found to detach rapidly from glass or silicon substrates. Detachment of the PPEGMA brushes could be monitored with contact angle measurements, which indicated a decrease in the receding water contact angle upon detachment. Detachment of the PPEGMA brushes also resulted in an increase in nonspecific protein adsorption. The stability, and as a consequence the long-term nonfouling properties, of the PPEGMA brushes could be improved by tailoring the brush density and, to a lesser extent, the molecular weight of the polymer chains. By appropriate decrease of the grafting density, the stability of the brushes in cell culture medium could be improved from less than 1 to more than 7 days, without compromising the nonfouling properties.     

Zwitterionic polymers in drug delivery: A review

Developments of novel drug delivery vehicles are sought-after to augment the therapeutic effectiveness of standard drugs. An urgency to design novel drug delivery vehicles that are sustainable, biocompatible, have minimized cytotoxicity, no immunogenicity, high stability, long circulation time, and are capable of averting recognition by the immune system is perceived. In this pursuit for an ideal candidate for drug delivery vehicles, zwitterionic materials have come up as fulfilling almost all these expectations. This comprehensive review is presenting the progress made by zwitterionic polymeric architectures as prospective sustainable drug delivery vehicles. Zwitterionic polymers with varied architecture such as appending protein conjugates, nanoparticles, surface coatings, liposomes, hydrogels, etc, used to fabricate drug delivery vehicles are reviewed here. A brief introduction of zwitterionic polymers and their application as reliable drug delivery vehicles, such as zwitterionic polymer–protein conjugates, zwitterionic polymer-based drug nanocarriers, and stimulus-responsive zwitterionic polymers are discussed in this discourse. The prospects shown by zwitterionic architecture suggest the tremendous potential for them in this domain. This critical review will encourage the researchers working in this area and boost the development and commercialization of such devices to benefit the healthcare fraternity.     

Functional polymer brushes via surface-initiated atom transfer radical graft polymerization for combating marine biofouling

Dense and uniform polymer brush coatings were developed to combat marine biofouling. Nonionic hydrophilic, nonionic hydrophobic, cationic, anionic and zwitterionic polymer brush coatings were synthesized via surface-initiated atom transfer radical polymerization (SI-ATRP) of 2-hydroxyethyl methacrylate, 2,3,4,5,6-pentafluorostyrene, 2-(methacryloyloxy)ethyl trimethylammonium chloride, 4-styrenesulfonic acid sodium and N,N′-dimethyl-(methylmethacryloyl ethyl) ammonium propanesulfonate, respectively. The functionalized surfaces had different efficacies in preventing adsorption of bovine serum albumin (BSA), adhesion of the Gram-negative bacterium Pseudomonas sp. NCIMB 2021 and the Gram-positive Staphylococcus aureus, and settlement of cyprids of the barnacle Amphibalanus amphitrite (=Balanus amphitrite). The nonionic hydrophilic, anionic and zwitterionic polymer brushes resisted BSA adsorption during a 2 h exposure period. The nonionic hydrophilic, cationic and zwitterionic brushes exhibited resistance to bacterial fouling (24 h exposure) and cyprid settlement (24 and 48 h incubation). The hydrophobic brushes moderately reduced protein adsorption, and bacteria and cyprid settlement. The anionic brushes were least effective in preventing attachment of bacteria and barnacle cyprids. Thus, the best approach to combat biofouling involves a combination of nonionic hydrophilic and zwitterionic polymer brush coatings on material surfaces.     

The construction of a zwitterionic PVDF membrane surface to improve biofouling resistance

Biofouling of membrane surfaces by the attachment of microorganisms is one of the major obstacles for ensuring the effectiveness of membrane separation processes. This work presents the construction of a zwitterionic PVDF membrane surface with improved resistance to biofouling. An amphiphilic copolymer of poly(vinylidene fluoride)-graft-poly(N,N-dimethylamino-2-ethylmethacrylate) (PVDF-g-PDMAEMA) was first synthesized via radical graft copolymerization and then the flat membrane was cast with immersed phase inversion. The PDMAEMA side chains tended to aggregate on the membrane surface, pore surface and internal pore channel surface, and were converted with 1,3-propane sultone (1,3-PS) to yield a zwitterionic membrane surface. A higher conversion of PDMAEMA chains and distribution of zwitterions were obtained using a longer treatment time. A biofouling assay indicated that incorporation of zwitterions suppressed the adsorption of extracellar polymer substances and the adhesion of Escherichia coli bacterial cells to the membrane surface, endowing the membrane with a high flux recovery and biofouling resistance in the filtration process.     

Synthesis and characterization of bioconjugates of S-layer proteins

The self-assembling proteins that form crystalline surface layers (S-layers) on many microbial species have found numerous applications due to their nanostructured nature. To devise a new method to construct surface displays that exploit S-layer self-assembly activity and nanostructural properties, we have constructed polymer bioconjugates of S-layer proteins. The conjugates formed are similar in function to the monomer alkanethiols that form self-assembled monolayers (SAMs) on gold surfaces. However, the self-assembly is driven by the protein "headgroup" that positions polymer-tethered endgroups on a surface. This paper examines the integration of protein purification, conjugation, and surface assembly that has led to the development of this new method for the formation of nanostructured surfaces. Purified S-layer proteins from Lactobacillus brevis were conjugated with small molecule probes and polymers using amine-based reactions. To keep multiple labeling of protein amine groups to acceptable levels, the conjugations were performed at pH 6.5, allowing for limited yields (24-39%) as determined by mass spectrometry and SDS-polyacrylamide gel electrophoresis. As the presence of high levels of unlabeled S-layer proteins is undesired, we have developed a protocol for further purification that employs monomeric avidin affinity chromatography. The surface self-assembly of the polymer bioconjugates onto amine-terminated microspheres was studied using epi-fluorescence, confocal, and scanning electron microscopy. The surfaces obtained exhibited homogeneous distributions of tethered molecules. Also, in cases where the modular assembly of two distinct types of tethered endgroups was accomplished, there was no evidence for phase separation in the surfaces. The modular assembly method will provide a potential route to controlling surface display density as the starting assembly conditions guide displayed endgroup concentrations in mixed molecular monolayers.     

The influence of poly(ethylene glycol) on the molecular dynamics within the glycocalyx

Interaction of polymers with cell surfaces is a question of general interest for cell aggregation and fusion. The molecular dynamics within the surface coat of human erythrocytes as well as alterations of membrane protein arrangement (IMPs) in the presence of poly(ethylene glycol) (PEG) were investigated by EPR spin labeling techniques and freeze-fracture electron microscopy, respectively. AT PEG concentrations which induce aggregation of erythrocytes the surface coat and the protein arrangement is not disturbed by the polymer. This implicate an exclusion of the polymer from the cell surface.     

Doubly biomimetic catecholic phosphorylcholine copolymer: a platform strategy for fabricating antifouling surfaces

A doubly biomimetic PMNC polymer bearing cell antifouling phosphorylcholine and mussel adhesive protein catechol groups is synthesized. The polymer can be deposited onto a variety of substrates by dip-coating in an aqueous solution, adhering to surfaces via the catechol functional group while at the same time forming a cell outer membrane mimetic antifouling surface. Contact angle, ATR-FTIR and XPS measurements confirm polymer coating formation on a variety of inorganic and organic substrates. BSA and bovine plasma fibrinogen protein adsorption on PMNC coated surfaces are reduced significantly compared to unmodified substrates, and platelet adhesion from human serum onto the PMNC coated substrate surfaces is highly suppressed in this study.     

Ultralow fouling polyacrylamide on gold surfaces via surface-initiated atom transfer radical polymerization

In this work, polyacrylamide is investigated as an ultralow fouling surface coating to highly resist protein adsorption, cell adhesion, and bacterial attachment. Polyacrylamide was grafted on gold surfaces via surface-initiated atom transfer radical polymerization (ATRP). Protein adsorption from a wide range of biological media, including single protein solutions of fibrinogen, bovine serum albumin, and lysozyme, dilute and undiluted human blood serum, and dilute and undiluted human blood plasma, was studied by surface plasmon resonance (SPR). Dependence of the protein resistance on polyacrylamide film thickness was examined. With the optimal film thickness, the adsorption amount of all three single proteins on polyacrylamide-grafted surfaces was <3 pg/mm(2), close to the detection limit of SPR. The average nonspecific adsorptions from 10% plasma, 10% serum, 100% plasma, and 100% serum onto the polyacrylamide-grafted surfaces were 5, 6.5, 17, and 28 pg/mm(2), respectively, comparable (if not better) than the adsorption levels on poly(ethylene glycol) (PEG) and zwitterionic poly(sulfobetaine methacrylate) surfaces, the best antifouling materials known to date. The polyacrylamide-grafted surfaces were also shown strongly resistant to adhesion from bovine aortic endothelial cells and two bacterial species, Gram-positive Staphylococcus epidermidis ( S. epidermidis ) and Gram-negative Pseudomonas aeruginosa ( P. aeruginosa ). Strong hydrogen bond with water is considered the key attribute for the ultralow fouling properties of polyacrylamide. This is the first work to graft gold surfaces with polyacrylamide brushes via ATRP to achieve ultralow fouling surfaces, demonstrating that polyacrylamide is a promising alternative to traditional PEG-based antifouling materials.     

Exclusion and retention of compensatory kosmotropes by HPLC columns

With water as the elution solvent, zwitterionic solutes and polyols were retained on HPLC columns, more than was water, by totally hydrophobic packing materials. Relative retentions were systematically affected by oxygen functional groups in the packing material, explicable as specific retention of water. Reproducible elution sequences of 20 solutes at a variety of hydrophobic surfaces (aromatic and both long- and short-alkyl aliphatic surfaces) showed there is a general process, consistent with interactions with hydration water at the surface having solvent properties distinct from bulk water. Early eluting solutes included glycine, sarcosine and taurine. Glycine betaine followed both these and N,N-dimethylglycine. The natural betaines propionobetaine and dimethylsulfoniopropionate also preceded glycine betaine. Dimethylsulfoxide was strongly retained, as (to a lesser extent) was proline betaine. Polyols eluted in the sequence sorbitol, trehalose, glycerol. Changes in the chemical nature of the surface or base material affected relative retentions of water and solutes. The presence of hydrogen-bonding functions increased retention of polyols, as well as water, relative to zwitterionic solutes. Specific effects with some solutes may be related to inconsistencies seen in biological systems. Pressures up to 8 MPa did not affect relative retention, constraining models based on the formation of low-density water.     

Effect of polymer brush architecture on antibiofouling properties

Polymer brushes show great promise in next-generation antibiofouling surfaces. Here, we have studied the influence of polymer brush architecture on protein resistance. By carefully optimizing reaction conditions, we were able to polymerize oligoglycerol-based brushes with sterically demanding linear or dendronized side chains on gold surfaces. Protein adsorption from serum and plasma was analyzed by surface plasmon resonance. Our findings reveal a pronounced dependence of biofouling on brush architecture. Bulky yet flexible side chains as in dendronized brushes provide an ideal environment to repel protein-possibly through formation of a hydration layer, which can be further enhanced by presenting free hydroxyl groups on the polymer brushes. A deeper understanding of how brush architecture influences protein resistance will ultimately enable fabrication of surface coatings tailored to specific requirements in biomedical applications.     

"Schizophrenic" Hemocompatible Copolymers via Switchable Thermoresponsive Transition of Nonionic/Zwitterionic Block Self-Assembly in Human Blood

"Schizophrenic" diblock copolymers containing nonionic and zwitterionic blocks were prepared with well-controlled molecular weights via atom-transfer radical polymerization (ATRP). In this work, we report a systematic study of how morphological changes of poly(N-isopropylacrylamide)-block-poly(sulfobetaine methacrylate) (PNIPAAm-b-PSBMA) copolymers affect hemocompatibility in human blood solution. The "schizophrenic" behavior of PNIPAAm-b-PSBMA was observed by (1)H NMR, dynamic light scattering (DLS), and turbidity measurement with double morphological transition, exhibiting both lower critical solution temperature (LCST) and upper critical solution temperature (UCST) in aqueous solution. Below the UCST of PSBMA block, micelles were obtained with a core of insoluble PSBMA association and a shell of soluble PNIPAAm, whereas the opposite micelle structure was observed above the LCST of PNIPAAm block. In between the UCST and LCST, unimers with both soluble blocks were detected. Hydrodynamic size of prepared polymers and copolymers is determined to illustrate the correlations between intermolecular nonionic/zwitterionic associations and blood compatibility of PNIPAAm, PNIPAAm-b-PSBMA, and PSBMA suspension in human blood. Human fibrinogen adsorption onto the PNIPAAm-b-PSBMA copolymers from single-protein solutions was measured by DLS to determine the nonfouling stability of copolymer suspension. The new nonfouling nature of PNIPAAm-b-PSBMA copolymers was demonstrated to show extremely high anticoagulant activity and antihemolytic activity in human blood over a wide range of explored temperatures from 4 to 40 °C. The temperature-independent blood compatibility of nonionic/zwitterionic block copolymer along with their schizophrenic phase behavior in aqueous solution suggests their potential in blood-contacting applications.