Immobilization of epoxide hydrolase from Aspergillus niger onto DEAE-cellulose: enzymatic properties and application for the enantioselective resolution of a racemic epoxide

Recombinant epoxide hydrolase (EH) from Aspergillus niger can be a very promising tool for the resolution of various racemic epoxides by enantioselective hydrolysis. The enzyme was successfully immobilized by ionic adsorption onto DEAE-cellulose (99% yield, 70% of retention activity). The temperature for maximal activity (40 °C) and the activation energy (38.8 kJ/mol) were similar for both the immobilized and free EHs, whereas the optimal pH was about one unit less for the immobilized enzyme. Thermal stability was also affected by immobilization; the immobilized enzyme appeared to be slightly less stable than the free one. However, a gram-scale resolution of racemic para-chlorostyrene oxide (pCSO) was successfully carried out in a repeated batch reactor, operated for seven cycles. Furthermore, using a very high substrate concentration of 2 M (306 g/L), i.e. biphasic conditions, the resolution of 3 g of pCSO was also achieved in a repeated batch reactor using approximately 300 mg of immobilized EH, corresponding to less than 3 mg of the enzymatic powder.     

Novel microbial epoxide hydrolases for biohydrolysis of glycidyl derivatives

Microbial isolates from biofilters and petroleum-polluted bioremediation sites were screened for the presence of enantioselective epoxide hydrolases active towards tert-butyl glycidyl ether, benzyl glycidyl ether, and allyl glycidyl ether. Out of 270 isolated strains, which comprised bacteria, yeasts, and filamentous fungi, four were selected based on the enantioselectivities of their epoxide hydrolases determined in biotransformation reactions. The enzyme of Aspergillus niger M200 preferentially hydrolyses (S)-tert-butyl glycidyl ether to (S)-3-tert-butoxy-1,2-propanediol with a relatively high enantioselectivity (the enantiomeric ratio E is about 30 at a reaction temperature of 28 °C). Epoxide hydrolases of Rhodotorula mucilaginosa M002 and Rhodococcus fascians M022 hydrolyse benzyl glycidyl ether with relatively low enantioselectivities, the former reacting predominantly with the (S)-enantiomer, the latter preferring the (R)-enantiomer. Enzymatic hydrolysis of allyl glycidyl ether by Cryptococcus laurentii M001 proceeds with low enantioselectivity (E = 3). (R)-tert-Butyl glycidyl ether with an enantiomeric excess (ee) of over 99%, and (S)-3-tert-butoxy-1,2-propanediol with an ee-value of 86% have been prepared on a gram-scale using whole cells of A. niger M200. An enantiomeric ratio of approximately 100 has been determined under optimised biotransformation conditions with the partially purified epoxide hydrolase from A. niger M200. The regioselectivity of this enzyme was determined to be total for both (S)-tert-butyl glycidyl ether and (R)-tert-butyl glycidyl ether.     

Directed Evolution of the Epoxide Hydrolase from Aspergillus niger

An efficient and genetically stable expression system for the directed evolution of epoxide hydrolase from Aspergillus niger (ANEH) has been constructed. Error prone polymerase chain reaction (PCR) with defined mutation rates was used to create biodiversity in two libraries of mutants. Screening for activity allowed the isolation of clones with improved properties. One of these clones shows an expression level 3.4 higher than the original wild type clone in E. coli SG13009 and a 3.3 fold increased catalytic efficiency on 4-(p-nitrophenoxy)-1,2-epoxybutane. In addition, a screening assay for determining the enantioselectivity in the kinetic resolution of styrene oxide has been established using mass spectrometry.     

Immobilization of the Solanum tuberosum epoxide hydrolase and its application in an enantioconvergent process

Five supports have been evaluated for the immobilization of the epoxide hydrolase from Solanum tuberosum (StEH) by adsorption. The highest immobilization yield (90-99%) and the maximum EH (epoxide hydrolase) activity (0.6 U g^-1 wet support) were obtained by ionic adsorption onto DEAE-cellulose. Although the activity recovered upon immobilization of StEH onto DEAE-cellulose was low, a notable stabilization factor of 6.9 at 65°C was obtained. In addition, the immobilized StEH showed a higher temperature for maximal activity (57°C) and the optimal pH (5.0) was shifted one unit towards the acidic region as compared to the free enzyme. Immobilized StEH was successfully reused in six consecutive hydrolytic kinetic resolutions of rac-pCSO without noticeable loss in activity. Finally, the sequential use of immobilized StEH with the immobilized EH from Aspergillus niger (AnEH) in a repeated batch reactor, operated for five cycles, enabled the enantioconvergent preparation of the corresponding (R)-diol, which was thus obtained with an ee of 89% and an overall yield of 100%.     

Stabilization of Nocardia EH1 epoxide hydrolase by immobilization

A partially purified epoxide hydrolase from Nocardia EH1 was stabilized by immobilization through ionic binding onto DEAE-cellulose. This biocatalyst showed more than twice the activity (225 %) of that of the free enzyme albeit at a marginal reduction in enantioselectivity. The addition of the nonionic detergent Triton X-100 during the immobilization further enhanced the stability as indicated by a dramatic shift in the temperature optimum from 35 to 45°C. The stabilized immobilized biocatalyst could be successfully employed in repeated batch reactions (residual activity of 55% after five cycles), which was not the case for whole cell reactions (residual activity 10 %). © Rapid Science Ltd. 1998     

In situ immobilization of β‐galactosidase from Bacillus circulans in silica by sol‐gel process: Application in prebiotic synthesis

The enzyme encapsulation is a very well‐known stabilization pathway. However, there are some challenges in order to avoid the enzyme denaturation under encapsulation conditions. The β‐galactosidase from Bacillus circulans was immobilized through sol‐gel encapsulation route assisted by Triton X‐100 surfactant and sugars. The effects of sugar presence in the immobilization process and the gelation time on the biocatalyst activity/stability were explained taking into account the characteristics of the formed silica matrix and the changes of the enzyme environment. The enzyme was effectively immobilized by this strategy, with high immobilization yield in terms of activity (29%) and expressed activity (47 IU/g). The immobilization through silica sol‐gel in the presence of 1×10^?3 M Triton X‐100 and fructose conferred 28.4‐fold higher stability to the enzyme compared with the soluble form. This is an advantage for its use in the synthesis of the galacto‐oligosaccharides at 50ºC. The total lactose conversion to galacto‐oligosaccharides was 26%wt, which is comparable with that reported in the literature. The obtained biocatalyst is useful for the synthesis of galacto‐oligosaccharides and its catalytic behavior is rationalized in this work.     

Multipoint covalent immobilization of microbial lipase on chitosan and agarose activated by different methods

In this work Candida antarctica lipase type B (CALB) was immobilized on agarose and chitosan. The influence of activation agents (glycidol, glutaraldehyde and epichlorohydrin) and immobilization time (5, 24 and 72 h) on hydrolytic activity, thermal and alkaline stabilities of the biocatalyst was evaluated. Protein concentration and enzymatic activity in the supernatant were determined during the immobilization process. More active derivatives were attained when the enzymatic extract was first purified through dialysis. The highest activities achieved were: for agarose-glyoxyl (with glycidol), 845 U/g of gel, after 72 h of immobilization; for chitosan-glutaraldehyde and agarose-glutaraldehyde, respectively, 1209 U/g of gel and 2716 U/g of gel, after 5 h of immobilization. Thermal stability was significantly increased, when compared to the soluble enzyme: 20-fold for agarose-glyoxyl (with glycidol)-CALB, 18-fold for chitosan-glutaraldehyde-CALB and 21-fold for agarose-glutaraldehyde. The best derivative, 58-fold more stable than the soluble enzyme, was obtained when CALB was immobilized on chitosan activated in two steps, using glycidol and glutaraldehyde, 72 h immobilization time. The stabilization degree of the derivative increased with the immobilization time, an indication that a multipoint covalent attachment between enzyme and the support had really occurred.     

Preparative-scale kinetic resolution of racemic styrene oxide by immobilized epoxide hydrolase

Epoxide hydrolase from Aspergillus niger was immobilized onto the modified Eupergit C 250 L through a Schiff base formation. Eupergit C 250 L was treated with ethylenediamine to introduce primary amine groups which were subsequently activated with glutaraldehyde. The amount of introduced primary amine groups was 220 μmol/g of the support after ethylenediamine treatment, and 90% of these groups were activated with glutaraldehyde. Maximum immobilization of 80% was obtained with modified Eupergit C 250 L under the optimized conditions. The optimum pH was 7.0 for the free epoxide hydrolase and 6.5 for the immobilized epoxide hydrolase. The optimum temperature for both free and immobilized epoxide hydrolase was 40 °C. The free epoxide hydrolase retained 52 and 33% of its maximum activity at 40 and 60 °C, respectively after 24h preincubation time whereas the retained activities of immobilized epoxide hydrolase at the same conditions were 90 and 75%, respectively. Immobilized epoxide hydrolase showed about 2.5-fold higher enantioselectivity than that of free epoxide hydrolase. A preparative-scale (120 g/L) kinetic resolution of racemic styrene oxide using immobilized preparation was performed in a batch reactor and (S)-styrene oxide and (R)-1-phenyl-1,2-ethanediol were both obtained with about 50% yield and 99% enantiomeric excess. The immobilized epoxide hydrolase was retained 90% of its initial activity after 5 reuses.     

Enantioselective hydrolysis of p-nitrostyrene oxide by an epoxide hydrolase preparation from Aspergillus niger

The epoxide hydrolase activity of Aspergillus niger was synthesized during growth of the fungus and was shown to be associated with the soluble cell fraction. An enzyme preparation was worked out which could be used in place of the whole mycelium as biocatalyst for the hydrolysis of epoxides. The effect of four different cosolvents on enzyme activity was investigated. Consequently, dimethylsulfoxide (DMSO) was selected for epoxide solubilization. The effect of temperature on both reaction rate and enzyme stability was studied in the presence of DMSO (0.2 volume ratio). A temperature of 25 degrees C was selected for the reaction of bioconversion. With a substrate concentration of 4.5 mM a batch reactor showed that the enzyme preparation hydrolyzed para-nitrostyrene oxide with very high enantioselectivity. The (S) enantiomer of the epoxide remained in the reaction mixture and showed an enantiomeric excess higher than 99%. The substrate concentration could be increased to 20 mM without affecting the enantiomeric excess and degree of conversion. Therefore, the method is potentially useful for the preparative resolution of epoxides. Application are in the field of chiral synthons which are important building blocks in organic synthesis. (c) 1996 John Wiley & Sons, Inc.     

Preparative-scale kinetic resolution of racemic styrene oxide by immobilized epoxide hydrolase

Epoxide hydrolase from Aspergillus niger was immobilized onto the modified Eupergit C 250 L through a Schiff base formation. Eupergit C 250 L was treated with ethylenediamine to introduce primary amine groups which were subsequently activated with glutaraldehyde. The amount of introduced primary amine groups was 220 μmol/g of the support after ethylenediamine treatment, and 90% of these groups were activated with glutaraldehyde. Maximum immobilization of 80% was obtained with modified Eupergit C 250 L under the optimized conditions. The optimum pH was 7.0 for the free epoxide hydrolase and 6.5 for the immobilized epoxide hydrolase. The optimum temperature for both free and immobilized epoxide hydrolase was 40 °C. The free epoxide hydrolase retained 52 and 33% of its maximum activity at 40 and 60 °C, respectively after 24 h preincubation time whereas the retained activities of immobilized epoxide hydrolase at the same conditions were 90 and 75%, respectively. Immobilized epoxide hydrolase showed about 2.5-fold higher enantioselectivity than that of free epoxide hydrolase. A preparative-scale (120 g/L) kinetic resolution of racemic styrene oxide using immobilized preparation was performed in a batch reactor and (S)-styrene oxide and (R)-1-phenyl-1,2-ethanediol were both obtained with about 50% yield and 99% enantiomeric excess. The immobilized epoxide hydrolase was retained 90% of its initial activity after 5 reuses.     

Improvement of enzymatic biodiesel production by controlled substrate feeding using silica gel in solvent free system

A silica gel-based substrate feeding system was developed to prevent methanol inhibiting the catalyst during enzymatic biodiesel synthesis. In the system, silica gel swelled upon methanol addition and subsequently released it in a controlled manner to prevent excess methanol affecting the enzyme. Biodiesel was synthesized by the enzymatic transesterification of canola oil with methanol. For this reaction, enzyme loading, methanol/oil molar ratio, silica gel dosage, glycerol content, and methanol feeding method were tested using commercial immobilized enzymes (Novozym 435 and Lipozyme RM IM from Novozymes). The results showed that conversion was highest with controlled substrate feeding rather than direct methanol addition, suggesting that the method developed here can easily prevent enzyme inhibition by limiting methanol concentration to an acceptable level.     

Improved catalytic performance of Bacillus megaterium epoxide hydrolase in a medium containing Tween-80

A new epoxide hydrolase with high enantioselectivity toward (R)-glycidyl phenyl ether (R-GPE) was partially purified from Bacillus megaterium strain ECU1001. The maximum activity of the isolated enzyme was observed at 30 degrees C and pH 6.5 in a buffer system with 5% (v/v) of DMSO as a cosolvent. The enzyme was quite stable at pH 7.5 and retained full activity after incubation at 40 degrees C for 6 h. Interestingly, when the cosolvent DMSO was replaced by an emulsifier (Tween-80, 0.5% w/v) as an alternative additive to help disperse the water-insoluble substrate, the apparent activity of the epoxide hydrolase significantly increased by about 1.8-fold, while the temperature optimum shifted from 30 to 40 degrees C and the half-life of the enzyme at 50 degrees C increased by 2.5 times. The enzymatic hydrolysis of rac-GPE was highly enantioselective, with an E-value (enantiomeric ratio) of 69.3 in the Tween-80 emulsion system, which is obviously higher than that (41.2) observed in the DMSO-containing system.     

Evaluation of regioselectivity of lipases based on synthesis reaction conducted with propyl alcohol, isopropyl alcohol and propylene glycol

Preliminary investigations on the regioselectiviy of various lipases were performed. Ten commercial lipases from different origins, including three immobilized lipases, were tested by esterification reaction between caprylic acid and propyl or isopropyl alcohol in n-hexane. Reaction products were analyzed with a gas chromatograph. Best yields were obtained with immobilized lipase IM60 from Rhizomucor miehei. Therefore, this enzyme was chosen as biocatalyst for a second step of regioselectiviy study with propylene glycol which bears primary and secondary alcohol groups. It was shown, by using several solvents, that polarity could influence the product profile in situations in which multiple products of various polarities can be formed. Furthermore, the major role of silica gel in reaction mixture was established.     

The Isolation and Characterisation of a Carbocyclic Epoxide-Degrading Corynebacterium sp

A two-phase aqueous/organic isolation system was developed for the isolation of epoxide-degrading bacteria. The potential of this system, for the isolation of cyclohexene oxide-degrading bacteria, was assessed by comparison to an analogous system lacking co-solvent. Using the biphasic isolation strategy, an epoxide-degrading Corynebacterium sp. designated C12, was isolated and was shown to grow on cyclohexene oxide as sole source of carbon and energy. Epoxide degradation appeared to proceed via a diol intermediate implicating the involvement of an epoxide hydrolase. The epoxide hydrolase of Corynebacterium sp. C12 was shown to have activity towards a range of terminal, sub-terminal and cyclic substrates. The enantioselectivity of the hydrolysis reaction was largely dependent on the nature of the substrate. In a series of biotransformations allowed to proceed to 50% substrate conversion, the remaining epoxide ranged from low (5% ee) to moderate (60% ee) optical purity.     

Immobilization of thermostable β-glucosidase from Sulfolobus shibatae by cross-linking with transglutaminase

Thermostable β-glucosidase from Sulfolobus shibatae was immobilized on silica gel modified or not modified with 3-aminopropyl-triethoxysilane using transglutaminase as a cross-linking factor. Obtained preparations had specific activity of 3883 U/g of the support, when measured at 70 °C using o-nitrophenyl β-d-galactopyranoside (GalβoNp) as substrate. The highest immobilization yield of the enzyme was achieved at pH 5.0 in reaction media. The most active preparations of immobilized β-glucosidase were obtained at a transglutaminase concentration of 40 mg/ml at 50 °C. The immobilization was almost completely terminated after 100 min of the reaction and prolonged time of this process did not cause considerable changes of the activity of the preparations. The immobilization did not influence considerably on optimum pH and temperature of GalβoNp hydrolysis catalyzed by the investigated enzyme (98 °C, pH 5.5). The broad substrate specifity and properties of the thermostable β-glucosidase from S. shibatae immobilized on silica-gel indicate its suitability for hydrolysis of lactose during whey processing.     

Immobilization of Mucor javanicus lipase on effectively functionalized silica nanoparticles

Mucor javanicus lipase was effectively immobilized on silica nanoparticles which were prepared by Stöber method. Glycidyl methacrylate (GMA), which bears a reactive epoxide group, was incorporated onto the surface of the nanoparticles and the epoxide groups were directly used for multipoint coupling of the enzyme. We also introduced amine residues by coupling ethylene diamine (EDA) to the epoxide group of GMA. M. javanicus lipase was covalently immobilized onto the amine-activated silica nanoparticles by using glutaraldehyde (GA) or 1,4 phenylene diisothiocyanate (NCS) as a coupling agent. The lipase loading capacities of the EDA-GA and EDA-NCS nanoparticles (81.3 and 60.9 mg g⁻¹, respectively) were much higher than that of the unmodified GMA nanoparticles (18.9 mg g⁻¹). The relative hydrolytic activities in an aqueous medium of the lipases immobilized on EDA-GA and EDA-NCS attached silica nanoparticles (115% and 107%, respectively) were significantly high and almost in the same range with the free enzyme. This may be due to the improvement of the enzyme–substrate interaction by avoiding the potential aggregation of free lipase molecules. The immobilized lipases were also more resistant to temperature inactivation than the free form. This work demonstrates that the size-controlled silica nanoparticles can be efficiently employed as host materials for enzyme immobilization leading to high activity and stability of the immobilized enzymes.     

Resolution of 2-octanol by SBA-15 immobilized Pseudomonas sp. lipase

Lipase from Pseudomonas sp. (PSL) was immobilized on SBA-15 (a highly ordered hexagonal array mesoporous silica molecular sieve) through physical adsorption and the immobilized PSL was used in resolution of (R,S)-2-octanol with vinyl acetate as acyl donor. Enhanced activity and enantioselectivity were observed for the immobilized PSL compared with those of the free one. The effects of reaction conditions, such as solvents, temperature, water activity and substrate ratio were investigated. Under the optimum conditions, the residual (S)-2-octanol was recovered with 99% enantiomeric excess at 52% conversion. The results also indicated that the immobilized PSL maintained 90% of its initial activity even after reusing it five times.     

Biocatalyst engineering exerts a dramatic effect on selectivity of hydrolysis catalyzed by immobilized lipases in aqueous medium

It has been found that enantioselectivity of lipases is strongly modified when their immobilization is performed by involving different areas of the enzyme surface, by promoting a different degree of multipoint covalent immobilization or by creating different environments surrounding different enzyme areas. Moreover, selectivity of some immobilized enzyme molecules was much more modulated by the experimental conditions than other derivatives. Thus, some immobilized derivatives of Candida rugosa (CRL) and C. antarctica-B (CABL) lipases are hardly enantioselective in the hydrolysis of chiral esters of (R,S)-mandelic acid under standard conditions (pH 7.0 and 25°C) (E<2). However, other derivatives of the same enzymes exhibited a very good enantioselectivity under nonstandard conditions. For example, CRL adsorbed on PEI-coated supports showed a very high enantio-preference towards S-isomer (E=200) at pH 5. On the other hand, CABL adsorbed on octyl-agarose showed an interesting enantio-preference towards the R-isomer (E=25) at pH 5 and 4°C. These biotransformations are catalyzed by isolated lipase molecules acting on fully soluble substrates and in the absence of interfacial activation against external hydrophobic interfaces. Under these conditions, lipase catalysis may be associated to important conformational changes that can be strongly modulated via biocatalyst and biotransformation engineering. In this way, selective biotransformations catalyzed by immobilized lipases in macro-aqueous systems can be easily modulated by designing different immobilized derivatives and reaction conditions.     

Differential response of human and rat epoxide hydrolase to polycyclic aromatic hydrocarbon exposure: studies using precision-cut tissue slices

The potential of polycyclic aromatic hydrocarbons (PAHs) to modulate microsomal epoxide hydrolase activity, determined using benzo[a]pyrene 5-oxide as substrate, in human liver, was evaluated and compared to rat liver. Precision-cut liver slices prepared from fresh human liver were incubated with six structurally diverse PAHs, at a range of concentrations, for 24 h. Of the six PAHs studied, benzo[a]pyrene, dibenzo[a,h]anthracene and fluoranthene gave rise to a statistically significant increase in epoxide hydrolase activity, which was accompanied by a concomitant increase in epoxide hydrolase protein levels determined by immunoblotting. The other PAHs studied, namely dibenzo[a,l]pyrene, benzo[b]fluoranthene and 1-methylphenanthrene, influenced neither activity nor enzyme protein levels. When rat slices were incubated under identical conditions, only benzo[a]pyrene and dibenzo[a,h]anthracene elevated epoxide hydrolase activity, which was, once again accompanied by a rise in protein levels. At the mRNA level, however, all six PAHs caused an increase, albeit to different extent. In rat, epoxide hydroxylase activity in lung slices was much lower than in liver slices. In lung slices, epoxide hydrolase activity was elevated following exposure to benzo[a]pyrene and dibenzo[a,l]pyrene and, to a lesser extent, 1-methylphenanthrene; similar observations were made at the protein level. At both activity and protein levels extent of induction was far more pronounced in the lung compared with the liver. It is concluded that epoxide hydrolase activity is an inducible enzyme by PAHs, in both human and rat liver, but induction potential by individual PAHs varies enormously, depending on the nature of the compound involved. Marked tissue differences in the nature of PAHs stimulating activity in rat lung and liver were noted. Although in the rat basal lung epoxide hydrolase activity is much lower than liver, it is more markedly inducible by PAHs.     

A dual enzyme system composed of a polyester hydrolase and a carboxylesterase enhances the biocatalytic degradation of polyethylene terephthalate films

TfCut2 from Thermobifida fusca KW3 and the metagenome‐derived LC‐cutinase are bacterial polyester hydrolases capable of efficiently degrading polyethylene terephthalate (PET) films. Since the enzymatic PET hydrolysis is inhibited by the degradation intermediate mono‐(2‐hydroxyethyl) terephthalate (MHET), a dual enzyme system consisting of a polyester hydrolase and the immobilized carboxylesterase TfCa from Thermobifida fusca KW3 was employed for the hydrolysis of PET films at 60°C. HPLC analysis of the reaction products obtained after 24 h of hydrolysis showed an increased amount of soluble products with a lower proportion of MHET in the presence of the immobilized TfCa. The results indicated a continuous hydrolysis of the inhibitory MHET by the immobilized TfCa and demonstrated its advantage as a second biocatalyst in combination with a polyester hydrolase for an efficient degradation oft PET films. The dual enzyme system with LC‐cutinase produced a 2.4‐fold higher amount of degradation products compared to TfCut2 after a reaction time of 24 h confirming the superior activity of his polyester hydrolase against PET films.