Asymmetrically simultaneous synthesis of L‐homophenylalanine and N6‐protected‐2‐oxo‐6‐amino‐hexanoic acid by engineered Escherichia coli aspartate aminotransferase

L ‐Homophenylalanine (L ‐HPA) and N⁶‐protected‐2‐oxo‐6‐amino‐hexanoic acid (N⁶‐protected‐OAHA) can be used as building blocks for the manufacture of angiotensin‐converting enzyme inhibitors. To synthesize L ‐HPA and N⁶‐protected‐OAHA simultaneously from 2‐oxo‐4‐phenylbutanoic acid (OPBA) and N⁶‐protected‐L ‐lysine, several variants of Escherichia coli aspartate aminotransferase (AAT) were developed by site‐directed mutagenesis and their catalytic activities were investigated. Three kinds of N⁶‐protected‐L ‐lysine were tested as potential amino donors for the bioconversion process. AAT variants of R292E/L18H and R292E/L18T exhibited specific activities of 0.70±0.01 U/mg protein and 0.67±0.02 U/mg protein to 2‐amino‐6‐tert‐butoxycarbonylamino‐hexanoic acid (BOC‐lysine) and 2‐amino‐6‐(2,2,2‐trifluoro‐acetylamino)‐hexanoic acid, respectively. E. coli cells expressing R292E/L18H variant were able to convert OPBA and BOC‐lysine to L ‐HPA and 2‐oxo‐6‐tert‐butoxycarbonylamino‐hexanoic acid (BOC‐OAHA) with 96.2% yield in 8 h. This is the first report demonstrating a process for the simultaneous production of two useful building blocks, L ‐HPA and BOC‐OAHA. © 2009 American Institute of Chemical Engineers Biotechnol. Prog., 2009     

Production of 8,11‐dihydroxy and 8‐hydroxy unsaturated fatty acids from unsaturated fatty acids by recombinant Escherichia coli expressing 8,11‐linoleate diol synthase from Penicillium chrysogenum

Hydroxy unsaturated fatty acids can be used as antimicrobial surfactants. 8,11‐Linoleate diol synthase (8,11‐LDS) catalyzes the conversion of unsaturated fatty acid to 8‐hydroperoxy unsaturated fatty acid, and it is subsequently isomerized to 8,11‐dihydroxy unsaturated fatty acid by the enzyme. The optimal reaction conditions of recombinant Escherichia coli expressing Penicillium chrysogenum 8,11‐LDS for the production of 8,11‐dihydroxy‐9,12(Z,Z)‐octadecadienoic acid (8,11‐DiHODE), 8,11‐dihydroxy‐9,12,15(Z,Z,Z)‐octadecatrienoic acid (8,11‐DiHOTrE), 8‐hydroxy‐9(Z)‐hexadecenoic acid (8‐HHME), and 8‐hydroxy‐9(Z)‐octadecenoic acid (8‐HOME) were pH 7.0, 25°C, 10 g/L linoleic acid, and 20 g/L cells; pH 6.0, 25°C, 6 g/L α‐linolenic acid, and 60 g/L cells; pH 7.0, 25°C, 8 g/L palmitoleic acid, and 25 g/L cells; and pH 8.5, 30°C, 6 g/L oleic acid, and 25 g/L cells, respectively. Under these optimized conditions, the recombinant cells produced 6.0 g/L 8,11‐DiHODE for 60 min, with a conversion of 60% (w/w) and a productivity of 6.0 g/L/h; 4.3 g/L 8,11‐DiHOTrE for 60 min, with a conversion of 72% (w/w) and a productivity of 4.3 g/L/h; 4.3 g/L 8‐HHME acid for 60 min, with a conversion of 54% (w/w) and a productivity of 4.3 g/L/h; and 0.9 g/L 8‐HOME for 30 min, with a conversion of 15% (w/w) and a productivity of 1.8 g/L/h. To best of our knowledge, this is the first report on the biotechnological production of 8,11‐DiHODE, 8,11‐DiHOTrE, 8‐HHME, and 8‐HOME. © 2017 American Institute of Chemical Engineers Biotechnol. Prog., 33:390–396, 2017     

An improved synthesis of (2S, 4S)‐ and (2S, 4R)‐2‐amino‐4‐methyldecanoic acids: assignment of the stereochemistry of culicinins

An improved synthesis of (2S, 4S)‐ and (2S, 4R)‐2‐amino‐4‐methyldecanoic acids was accomplished using a glutamate derivative as starting material and Evans' asymmetric alkylation as the decisive step. The NMR data of the two diastereomers were measured and compared with those of the natural product. As a result, the stereochemistry of this novel amino acid unit in culicinins was assigned as (2S, 4R). Copyright © 2011 European Peptide Society and John Wiley & Sons, Ltd.     

2-Hydroxy-ceramide synthesis by ceramide synthase family: enzymatic basis for the preference of FA chain length

Ceramide is unusually abundant in epidermal stratum corneum and is important for permeability barrier function. Ceramides in epidermis also comprise an unusual variety, including 2-hydroxy (alpha-hydroxy)-ceramide. Six mammalian ceramide synthase/longevity assurance homologue (CerS/LASS) family members have been identified as synthases responsible for ceramide (CER) production. We reveal here that of the six, CerS3/LASS3 mRNA is the most predominantly expressed in keratinocytes. Moreover, its expression is increased upon differentiation. CerS family members have known substrate specificities for fatty acyl-CoA chain length and saturation, yet their abilities to produce 2-hydroxy-CER have not been examined. In the present study, we demonstrate that all CerS members can produce 2-hydroxy-CER when overproduced in HEK 293T cells. Each produced a 2-hydroxy-CER with a chain length similar to that of the respective nonhydroxy-CER produced. In HeLa cells overproducing the FA 2-hydroxylase FA2H, knock-down of CerS2 resulted in a reduction in total long-chain 2-hydroxy-CERs, confirming enzyme substrate specificity for chain length. In vitro CerS assays confirmed the ability of CerS1 to utilize 2-hydroxy-stearoyl-CoA as a substrate. These results suggest that all CerS members can synthesize 2-hydroxy-CER with specificity for 2-hydroxy-fatty acyl-CoA chain length and that CerS3 may be important in CER and 2-hydroxy-CER synthesis in epidermis.     

High‐Performance Liquid Chromatographic Enantioseparation of Unusual Isoxazoline‐Fused 2‐Aminocyclopentanecarboxylic Acids on (+)‐(18‐Crown‐6)‐2,3,11,12‐Tetracarboxylic Acid‐Based Chiral Stationary Phases

The enantiomers of four unusual isoxazoline‐fused 2‐aminocyclopentanecarboxylic acids were directly separated on chiral stationary phases containing (+)‐(18‐crown‐6)‐2,3,11,12‐tetracarboxylic acid as chiral selector. The nature of the alcoholic modifier (MeOH, EtOH, IPA) exerted a great effect on the retention, whereas the selectivity and resolution did not change substantially. Two types of dependence of retention on alcohol content were detected: k₁ increased continuously with increasing alcohol content or a U‐shaped retention curve was observed. A comparison of the chromatographic data obtained with HCOOH, AcOH, TFA, HClO₄, H₂SO₄, or H₃PO₄ as acidic modifier at a constant concentration demonstrated that in most cases, larger k values were obtained on the application of AcOH or HCOOH, and an increase of the acid content resulted in a decrease of retention. Some mechanistic aspects of the chiral recognition process are discussed with respect to the structures of the analytes and selector. The sequence of elution of the enantiomers was determined in all cases. Chirality 24:817‐824, 2012. © 2012 Wiley Periodicals, Inc.     

A general method for preparation of N‐Boc‐protected or N‐Fmoc‐protected α,β‐didehydropeptide building blocks and their use in the solid‐phase peptide synthesis

N‐(tert‐butyloxycarbonyl) or N‐(9‐fluorenylmethoxycarbonyl) dipeptides with C‐terminal (Z)‐α,β‐didehydrophenylalanine (?^ZPhe), (Z)‐α,β‐didehydrotyrosine (?^ZTyr), (Z)‐α,β‐didehydrotryptophan (?^ZTrp), (Z)‐α,β‐didehydromethionine (?^ZMet), (Z)‐α,β‐didehydroleucine (?^ZLeu), and (Z/E)‐α,β‐didehydroisoleucine (?^Z/EIle) were synthesised from their saturated analogues via oxidation of intermediate 2,5‐disubstituted‐oxazol‐5‐(4H)‐ones (also known as azlactones) with pyridinium tribromide followed by opening of the produced unsaturated oxazol‐5‐(4H)‐one derivatives in organic‐aqueous solution with a catalytic amount of trifluoroacetic acid or by a basic hydrolysis. In all cases, a very strong preference for Z isomers of α,β‐didehydro‐α‐amino acid residues was observed except of the ΔIle, which was obtained as the equimolar mixture of Z and E isomers. Reasons for the (Z)‐stereoselectivity and the increased stability of the aromatic α,β‐didehydro‐α‐amino acid residue oxazol‐5‐(4H)‐ones over the corresponding aliphatic ones are also discussed. It is the first use of such a procedure to synthesise peptides with the C‐terminal unsaturated residues and a peptide with 2 consecutive ΔPhe residues. This approach is very effective especially in the synthesis of peptides with aliphatic α,β‐didehydro‐α‐amino acid residues that are difficult to obtain by other methods. It allowed the first synthesis of the ?Met residue. It is also more cost‐effective and less laborious than other synthesis protocols. The dipeptide building blocks obtained were used in the solid‐phase synthesis of model peptides on a polystyrene‐based solid support. Peptides containing aromatic α,β‐didehydro‐α‐amino acid residues were obtained with PyBOP or TBTU as a coupling agent with good yields and purities. In the case of aliphatic α,β‐didehydro‐α‐amino acid residues, a good efficiency was achieved only with DPPA as a coupling agent.     

Preparative Enantioseparation of β‐Substituted‐2‐Phenylpropionic Acids by Countercurrent Chromatography With Substituted β‐Cyclodextrin as Chiral Selectors

Preparative enantioseparation of four β‐substituted‐2‐phenylpropionic acids was performed by countercurrent chromatography with substituted β‐cyclodextrin as chiral selectors. The two‐phase solvent system was composed of n‐hexane‐ethyl acetate‐0.10 mol L‐1 of phosphate buffer solution at pH 2.67 containing 0.10 mol L^‐1 of hydroxypropyl‐β‐cyclodextrin (HP‐β‐CD) or sulfobutylether‐β‐cyclodextrin (SBE‐β‐CD). The influence factors, including the type of substituted β‐cyclodextrin, composition of organic phase, concentration of chiral selector, pH value of the aqueous phase, and equilibrium temperature were optimized by enantioselective liquid–liquid extraction. Under the optimum separation conditions, 100 mg of 2‐phenylbutyric acid, 100 mg of tropic acid, and 50 mg of 2,3‐diphenylpropionic acid were successfully enantioseparated by high‐speed countercurrent chromatography, and the recovery of the (±)‐enantiomers was in the range of 90–91% for (±)‐2‐phenylbutyric acid, 91–92% for (±)‐tropic acid, 85–87% for (±)‐2,3‐diphenylpropionic acid with purity of over 97%, 96%, and 98%, respectively. The formation of 1:1 stoichiometric inclusion complex of β‐substituted‐2‐phenylpropionic acids with HP‐β‐CD was determined by UV spectrophotometry and the inclusion constants were calculated by a modified Benesi‐Hildebrand equation. The results showed that different enantioselectivities among different racemates were mainly caused by different enantiorecognition between each enantiomer and HP‐β‐CD, while it might be partially caused by different inclusion capacity between racemic solutes and HP‐β‐CD. Chirality 27:795–801, 2015. © 2015 Wiley Periodicals, Inc.     

Distinct ecological niches of marine symbiotic N2‐fixing cyanobacterium Candidatus Atelocyanobacterium thalassa sublineages

A recently described symbiosis between the metabolically streamlined nitrogen‐fixing cyanobacterium UCYN‐A and a single‐celled eukaryote prymnesiophyte alga is widely distributed throughout tropical and subtropical marine waters, and is thought to contribute significantly to nitrogen fixation in these regions. Several UCYN‐A sublineages have been defined based on UCYN‐A nitrogenase (nifH) sequences. Due to the low abundances of UCYN‐A in the global oceans, currently existing molecular techniques are limited for detecting and quantifying these organisms. A targeted approach is needed to adequately characterize the diversity of this important marine cyanobacterium, and to advance understanding of its ecological importance. We present findings on the distribution of UCYN‐A sublineages based on high throughput sequencing of UCYN‐A nifH PCR amplicons from 78 samples distributed throughout many major oceanic provinces. These UCYN‐A nifH fragments were used to define oligotypes, alternative taxonomic units defined by nucleotide positions with high variability. The data set was dominated by a single oligotype associated with the UCYN‐A1 sublineage, consistent with previous observations of relatively high abundances in tropical and subtropical regions. However, this analysis also revealed for the first time the widespread distribution of the UCYN‐A3 sublineage in oligotrophic waters. Furthermore, distinct assemblages of UCYN‐A oligotypes were found in oligotrophic and coastally influenced waters. This unique data set provides a framework for determining the environmental controls on UCYN‐A distributions and the ecological importance of the different sublineages.     

Highly efficient enzymatic synthesis of an ascorbyl unstaturated fatty acid ester with ecofriendly biomass‐derived 2‐methyltetrahydrofuran as cosolvent

Enzymatic synthesis of ascorbyl undecylenate, an unsaturated fatty acid ester of ascorbic acid, was reported with biomass‐derived 2‐methyltetrahydrofuran (MeTHF) as the cosolvent. Of the immobilized lipases tested, Candida antarctica lipase B (CAL‐B) showed the highest activity for enzymatic synthesis of ascorbyl undecylenate. Effect of reaction media on the enzymatic reaction was studied. The cosolvent mixture, t‐butanol‐MeTHF (1:4, v/v) proved to be the optimal medium, in which not only ascorbic acid had moderate solubility, but also CAL‐B showed a high activity, thus addressing the major problem of the solvent conflict for dissolving substrate and keeping satisfactory enzyme activity. In addition, the enzyme was much more stable in MeTHF and t‐butanol‐MeTHF (1:4) than in previously widely used organic solvents, t‐butanol, 2‐methyl‐2‐butanol, and acetone. The much higher initial reaction rate in this cosolvent mixture may be rationalized by the much lower apparent activation energy of this enzymatic reaction (26.6 vs. 38.1–39.1 kJ/mol) and higher enzyme catalytic efficiency (V_max/K_m, 8.4 vs. 1.3–1.4 h^?1). Ascorbyl undecylenate was obtained with the yields of 84–89% and 6‐regioselectivity of >99% in t‐butanol‐MeTHF (1:4) at supersaturated substrate concentrations (60 and 100 mM) after 5–8 h. © 2014 American Institute of Chemical Engineers Biotechnol. Prog., 30:1005–1011, 2014     

Ligand entry into the calyx of β‐lactoglobulin

Although the thermodynamic principles that control the binding of drug molecules to their protein targets are well understood, the detailed process of how a ligand reaches a protein binding site has been an intriguing question over decades. The short time interval between the encounter between a ligand and its receptor to the formation of the stable complex has prevented experimental observations. Bovine β‐lactoglobulin (βlg) is a lipocalin member that carries fatty acids (FAs) and other lipids in the cellular environment. Βlg accommodates a FA molecule in its highly hydrophobic cavity and exhibits the capability of recognizing a wide variety of hydrophobic ligands. To elucidate the ligand entry process on βlg, we report molecular dynamics simulations of the encounter between palmitate (PA) or laurate (LA) and βlg. Our results show that residues localized in loops at the cavity entrance play an important role in the ligand penetration process. Analysis of the short‐term interaction energies show that the forces operating on the systems lead to average conformations very close to the crystallographic holo‐forms. Whereas the binding free energy analysis using the molecular mechanics Generalized Born surface area method shows that these conformations were thermodynamically favorable. © 2013 Wiley Periodicals, Inc. Biopolymers 101: 744–757, 2014.     

α‐N‐Protected dipeptide acids: a simple and efficient synthesis via the easily accessible mixed anhydride method using free amino acids in DMSO and tetrabutylammonium hydroxide

The importance of dipeptides both in medicinal and pharmacological fields is well documented and many efforts have been made to find simple and efficient methods for their synthesis. For this reason, we have investigated the synthesis of α‐N‐protected dipeptide acids by reacting the easily accessible mixed anhydride of α‐N‐protected amino acids with free amino acids under different reaction conditions. The combination of TBA‐OH and DMSO has been found to be the best to overcome the low solubility of amino acids in organic solvents. Under these experimental conditions, the homogeneous phase condensation reaction occurs rapidly and without detectable epimerization. The present method is also applicable to side‐chain unprotected Tyr, Trp, Glu, and Asp but not Lys. This latter residue is able to engage two molecules of mixed anhydride giving the corresponding isotripeptide. Moreover, the applicability of this protocol for the synthesis of tri‐ and tetrapeptides has been tested. This approach reduces the need for protecting groups, is cost effective, scalable, and yields dipeptide acids that can be used as building blocks in the synthesis of larger peptides. Copyright © 2013 European Peptide Society and John Wiley & Sons, Ltd.     

Enantioselective resolution of 4‐chloromandelic acid by liquid–liquid extraction using 2‐chloro‐N‐carbobenzyloxy‐L‐amino acid

A liquid–liquid extraction resolution of 4‐chloro‐mandelic acid (4‐ClMA) was studied by using 2‐chloro‐N‐carbobenzyloxy‐L‐amino acid (2‐Cl‐Z‐AA) as a chiral extractant. Important factors affecting the extraction efficiency were investigated, including the type of chiral extractant, pH value of aqueous phase, initial concentration of chiral extractant in organic phase, initial concentration of 4‐ClMA in aqueous phase, and resolution temperature. It was observed that the concentration of (R)‐4‐ClMA was much higher than that of (S)‐4‐ClMA in organic phase due to a higher stability of the complex formed between (R)‐4‐ClMA and 2‐Cl‐Z‐AA. A separation factor (α) of 3.05 was obtained at 0.02 mol/L 2‐Cl‐Z‐Valine dissolved in dichloromethane, pH of 2.0, concentration of 4‐ClMA of 0.11 mmol/Land T of 296.7K.     

Green synthesis of enantiopure (S)‐1‐(benzofuran‐2‐yl)ethanol by whole‐cell biocatalyst

Optically active aromatic alcohols are valuable chiral building blocks of many natural products and chiral drugs. Lactobacillus paracasei BD87E6, which was isolated from a cereal‐based fermented beverage, was shown as a biocatalyst for the bioreduction of 1‐(benzofuran‐2‐yl) ethanone to (S)‐1‐(benzofuran‐2‐yl) ethanol with highly stereoselectivity. The bioreduction conditions were optimized using L. paracasei BD87E6 to obtain high enantiomeric excess (ee) and conversion. After optimization of the bioreduction conditions, it was shown that the bioreduction of 1‐(benzofuran‐2‐yl)ethanone was performed in mild reaction conditions. The asymmetric bioreduction of the 1‐(benzofuran‐2‐yl)ethanone had reached 92% yield with ee of higher than 99.9% at 6.73 g of substrate. Our study gave the first example for enantiopure production of (S)‐1‐(benzofuran‐2‐yl)ethanol by a biological green method. This process is also scalable and has potential in application. In this study, a basic and novel whole‐cell mediated biocatalytic method was performed for the enantiopure production of (S)‐1‐(benzofuran‐2‐yl)ethanol in the aqueous medium, which empowered the synthesis of a precious chiral intermediary process to be converted into a sophisticated molecule for drug production.     

Microbial production of conjugated γ‐linolenic acid from γ‐linolenic acid by Lactobacillus plantarum AKU 1009a

Aims: Optimal production conditions of conjugated γ‐linolenic acid (CGLA) from γ‐linolenic acid using washed cells of Lactobacillus plantarum AKU 1009a as catalysts were investigated. Methods and Results: Washed cells of Lact. plantarum AKU 1009a exhibiting a high level of CGLA productivity were obtained by cultivation in a nutrient medium supplemented with 0·03% (w/v) α‐linolenic acid as an inducer. Under the optimal reaction conditions with 13 mg ml^?1γ‐linolenic acid as a substrate in 5 ‐ml reaction volume, the washed cells [32% (wet cells, w/v) corresponding to 46 mg ml^?1 dry cells] as the catalysts produced 8·8 mg CGLA per millilitre reaction mixture (68% molar yield) in 27 h. The produced CGLA was a mixture of two isomers, i.e., cis‐6,cis‐9,trans‐11‐octadecatrienoic acid (CGLA1, 40% of total CGLA) and cis‐6,trans‐9,trans‐11‐octadecatrienoic acid (CGLA2, 60% of total CGLA), and accounted for 66% of total fatty acid obtained. The CGLA produced was obtained as free fatty acids adsorbed mostly on the surface of the cells of Lact. plantarum AKU1009a. Conclusion: The practical process of CGLA production from γ‐linolenic acid using washed cells of Lact. plantarum AKU 1009a was successfully established. Significance and Impact of the Study: We presented the first example of microbial production of CGLA. CGLA produced by the process is valuable for evaluating their physiological and nutritional effects, and chemical characteristics.