Effect of DNA on the conformational dynamics of the endonucleases I‐DmoI as provided by molecular dynamics simulations

The conformational behavior of the wild‐type endonucleases I‐DmoI and two of its mutants has been studied in the presence and in the absence of DNA target sequences by means of extended molecular dynamics simulations. Our results show that in the absence of DNA, the three protein forms explore a similar essential conformational space, whereas when bound to the same DNA target sequence of 25 base pairs, they diversify and restrain the subspace explored. In addition, the differences in the essential subspaces explored by the residues near the catalytic site for both the bound and unbound forms are discussed in background of the experimental protein activity.     

DNA condensation by TmHU studied by optical tweezers,AFM and molecular dynamics simulations

The compaction of DNA by the HU protein from Thermotoga maritima (TmHU) is analysed on a single-molecule level by the usage of an optical tweezers-assisted force clamp. The condensation reaction is investigated at forces between 2 and 40 pN applied to the ends of the DNA as well as in dependence on the TmHU concentration. At 2 and 5 pN, the DNA compaction down to 30% of the initial end-to-end distance takes place in two regimes. Increasing the force changes the progression of the reaction until almost nothing is observed at 40 pN. Based on the results of steered molecular dynamics simulations, the first regime of the length reduction is assigned to a primary level of DNA compaction by TmHU. The second one is supposed to correspond to the formation of higher levels of structural organisation. These findings are supported by results obtained by atomic force microscopy.     

Insights into the DNA repair process by the formamidopyrimidine-DNA glycosylase investigated by molecular dynamics

Formamidopyrimidine-DNA glycosylase (Fpg) identifies and removes 8-oxoguanine from DNA. All of the X-ray structures of Fpg complexed to an abasic site containing DNA exhibit a common disordered region present in the C-terminal domain of the enzyme. However, this region is believed to be involved in the damaged base binding site when the initial protein/DNA complex is formed. The dynamic behavior of the disordered polypeptide (named Loop) in relation to the supposed scenario for the DNA repair mechanism was investigated by molecular dynamics on different models, derived from the X-ray structure of Lactococcus lactis Fpg bound to an abasic site analog-containing DNA and of Bacillus stearothermophilus Fpg bound to 8-oxoG. This study shows that the presence of the damaged base influences the dynamics of the whole enzyme and that the Loop location is dependent on the presence and on the conformation of the 8-oxoG in its binding site. In addition, from our results, the conformation of the 8-oxoG seems to be favored in syn in the L. lactis models, in agreement with the available X-ray structure from B. stearothermophilus Fpg and with a possible catalytic role of the flexibility of the Loop region.     

Influence of a cis,syn‐cyclobutane pyrimidine dimer damage on DNA conformation studied by molecular dynamics simulations

The photo‐induced formation of cis‐syn‐cyclobutane pyrimidine dimers (CPD) is a highly mutagenic and cancerogenic DNA lesion. In bacteria photolyases can efficiently reverse the dimer formation employing a light‐driven reaction after looping out the CPD damaged bases into the enzyme active site. The exact mechanism how the repair enzyme identifies a damaged site within a large surplus of undamaged DNA is not fully understood. The CPD damage may alter the DNA structure and dynamics already in the absence of the repair enzyme which can facilitate the initial binding of a photolyase repair enzyme. To characterize the effect of a CPD damage, extensive comparative molecular dynamics (MD) simulations on duplex DNA with central regular or CPD damaged nucleotides were performed supplemented with simulations of the DNA‐photolyase complex. Although no spontaneous flipping out transitions of the damaged bases were observed, the simulations showed significant differences in the conformational states of regular and CPD damage DNA. The isolated damaged DNA adopted transient conformations which resembled the global shape of the repair enzyme bound conformation more closely compared to regular B‐DNA. In particular, these conformational changes were observed in most of helical and structural parameters where the protein bound DNA differs drastically from regular B‐DNA. It is likely that the transient overlap of isolated DNA with the enzyme bound DNA conformation plays a decisive role for the specific and rapid initial recognition by the repair enzyme prior to the looping out process of the damaged DNA. © 2014 Wiley Periodicals, Inc. Biopolymers 103: 215–222, 2015.     

Relative flexibility of DNA and RNA: a molecular dynamics study

State of the art molecular dynamics simulations are used to study the structure, dynamics, molecular interaction properties and flexibility of DNA and RNA duplexes in aqueous solution. Special attention is paid to the deformability of both types of structures, revisiting concepts on the relative flexibility of DNA and RNA duplexes. Our simulations strongly suggest that the concepts of flexibility, rigidity and deformability are much more complex than usually believed, and that it is not always true that DNA is more flexible than RNA.     

Ligand unbinding pathways from the vitamin D receptor studied by molecular dynamics simulations

Molecular dynamics simulation techniques have been used to study the unbinding pathways of 1α,25-dihydroxyvitamin D₃ from the ligand-binding pocket of the vitamin D receptor (VDR). The pathways observed in a large number of relatively short (<200 ps) random acceleration molecular dynamics (RAMD) trajectories were found to be in fair agreement, both in terms of pathway locations and deduced relative preferences, compared to targeted molecular dynamics (TMD) and streered molecular dynamics simulations (SMD). However, the high-velocity ligand expulsions of RAMD tend to favor straight expulsion trajectories and the observed relative frequencies of different pathways were biased towards the probability of entering a particular exit channel. Simulations indicated that for VDR the unbinding pathway between the H1–H2 loop and the β-sheet between H5 and H6 is more favorable than the pathway located between the H1–H2 loop and H3. The latter pathway has been suggested to be the most likely unbinding path for thyroid hormone receptors (TRs) and a likely path for retinoic acid receptor. Ligand entry/exit through these two pathways would not require displacement of H12 from its agonistic position. Differences in the packing of the H1, H2, H3 and β-sheet region explain the changed relative preference of the two unbinding pathways in VDR and TRs. Based on the crystal structures of the ligand binding domains of class 2 nuclear receptors, whose members are VDR and TRs, this receptor class can be divided in two groups according to the packing of the H1, H2, H3 and β-sheet region. Electronic supplementary material  The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Role of 6-Mercaptopurine in the potential therapeutic targets DNA base pairs and G-quadruplex DNA: insights from quantum chemical and molecular dynamics simulations

The theoretical studies on DNA with the anticancer drug 6-Mercaptopurine (6-MP) are investigated using theoretical methods to shed light on drug designing. Among the DNA base pairs considered, 6-MP is stacked with GC with the highest interaction energy of –46.19 kcal/mol. Structural parameters revealed that structure of the DNA base pairs is deviated from the planarity of the equilibrium position due to the formation of hydrogen bonds and stacking interactions with 6-MP. These deviations are verified through the systematic comparison between X–H bond contraction and elongation and the associated blue shift and red shift values by both NBO analysis and vibrational analysis. Bent’s rule is verified for the C–H bond contraction in the 6-MP interacted base pairs. The AIM results disclose that the higher values of electron density (ρ) and Laplacian of electron density (?²ρ) indicate the increased overlap between the orbitals that represent the strong interaction and positive values of the total electron density show the closed-shell interaction. The relative sensitivity of the chemical shift values for the DNA base pairs with 6-MP is investigated to confirm the hydrogen bond strength. Molecular dynamics simulation studies of G-quadruplex DNA d(TGGGGT)₄ with 6-MP revealed that the incorporation of 6-MP appears to cause local distortions and destabilize the G-quadruplex DNA.     

The flexibility of P-glycoprotein for its poly-specific drug binding from molecular dynamics simulations

The multidrug efflux pump P-glycoprotein (P-gp) contributes to multidrug resistance in about half of human cancers. Recently, high resolution X-ray crystal structures of mouse P-gp (inward-facing) were reported, which significantly facilitates the understanding of the function of P-gp and the structure-based design of inhibitors for P-gp. Here we perform 20?ns molecular dynamics simulations of inward-facing P-gp with/without ligand in explicit lipid and water to investigate the flexibility of P-gp for its poly-specific drug binding. By analyzing the interactions between P-gp and QZ59-RRR or QZ59-SSS, we summarize the important residues and the flexibility of different parts of P-gp. Particularly, the flexibility of the side chains of aromatic residues (Phe and Tyr) allows them to form rotamers with different orientations in the binding pocket, which plays a critical role for the poly-specificity of the drug-binding cavity of P-gp. MD simulations reveal that trans-membrane (TM) TM12 and TM6 are flexible and contribute to the poly-specific drug binding, while TM4 and TM5 are rigid and stabilize the whole structure. We also construct outward-facing P-gp based on the MsbA structure and perform 20?ns MD simulations. The comparison between the MD results for outward-facing P-gp and those for inward-facing P-gp shows that the TM parts in outward-facing P-gp undergo significant conformational change to facilitate the export of small molecules.     

Explicit-solvent molecular dynamics simulations of a DNA tetradecanucleotide duplex: lattice-sum versus reaction-field electrostatics

Five long-timescale (10 ns) explicit-solvent molecular dynamics simulations of a DNA tetradecanucleotide dimer are performed using the GROMOS 45A4 force field and the simple-point-charge water model, in order to investigate the effect of the treatment of long-range electrostatic interactions as well as of the box shape and size on the structure and dynamics of the molecule (starting from an idealised B-DNA conformation). Long-range electrostatic interactions are handled using either a lattice-sum (LS) method (particle–particle–particle–mesh; one simulation performed within a cubic box) or a cutoff-based reaction-field (RF) method (four simulations, with long-range cutoff distances of 1.4 or 2.0 nm and performed within cubic or truncated octahedral periodic boxes). The overall double-helical structure, including Watson–Crick (WC) base-pairing, is well conserved in the simulation employing the LS scheme. In contrast, the WC base-pairing is nearly completely disrupted in the four simulations employing the RF scheme. These four simulations result in highly distorted compact (cutoff distance of 1.4 nm) or extended (cutoff distance of 2 nm) structures, irrespective of the shape and size of the computational box. These differences observed between the two schemes seem correlated with large differences in the radial distribution function between charged entities (backbone phosphate groups and sodium counterions) within the system.     

Thermal stability of single‐domain antibodies estimated by molecular dynamics simulations

Single‐domain antibodies (sdAbs) function like regular antibodies, however, consist of only one domain. Because of their low molecular weight, sdAbs have advantages with respect to production and delivery to their targets and for applications such as antibody drugs and biosensors. Thus, sdAbs with high thermal stability are required. In this work, we chose seven sdAbs, which have a wide range of melting temperature (T_m) values and known structures. We applied molecular dynamics (MD) simulations to estimate their relative stability and compared them with the experimental data. High‐temperature MD simulations at 400 K and 500 K were executed with simulations at 300 K as a control. The fraction of native atomic contacts, Q, measured for the 400 K simulations showed a fairly good correlation with the T_m values. Interestingly, when the residues were classified by their hydrophobicity and size, the Q values of hydrophilic residues exhibited an even better correlation, suggesting that stabilization is correlated with favorable interactions of hydrophilic residues. Measuring the Q value on a per‐residue level enabled us to identify residues that contribute significantly to the instability and thus demonstrating how our analysis can be used in a mutant case study.     

Identification of the PcrA DNA helicase reaction pathway by applying advanced targeted molecular dynamic simulations

PcrA DNA helicase uses the free energy of hydrolysis and binding of ATP to unwind double-stranded DNA (ds-DNA). There are two states of PcrA, termed the substrate and product complexes and, through the conformational changes between these two states, PcrA moves along ds-DNA and separates the two strands. In this study, two different methods, namely chain minimisation (CM, less reliable method) and auto targeted molecular dynamic (TMD) simulation (more reliable), were performed to generate two different initial reaction pathways between these two states, and then fixed root mean square distance (RMSD) TMD simulation was performed to optimise these two initial pathways. In general, the two optimised pathways share very similar major conformational changes, but are different in the minor motions. The potential energy profiles of the two improved pathways are generally similar, but the one generated by the improved TMD path is slightly lower. Considering the poor reliability of the initial path generated by CM and insignificant improvements of the auto-TMD path, our study suggests that fixed RMSD TMD simulation can generate reliable reaction pathways, but the different initial paths still have some influence on the detailed conformational analysis.     

Effect of gold nanoparticle on stability of the DNA molecule: A study of molecular dynamics simulation

An understanding of the mechanism of DNA interactions with gold nanoparticles is useful in today medicine applications. We have performed a molecular dynamics simulation on a B-DNA duplex (CCTCAGGCCTCC) in the vicinity of a gold nanoparticle with a truncated octahedron structure composed of 201 gold atoms (diameter ～1.8 nm) to investigate gold nanoparticle (GNP) effects on the stability of DNA. During simulation, the nanoparticle is closed to DNA and phosphate groups direct the particles into the major grooves of the DNA molecule. Because of peeling and untwisting states that are occur at end of DNA, the nucleotide base lies flat on the surface of GNP. The configuration entropy is estimated using the covariance matrix of atom-positional fluctuations for different bases. The results show that when a gold nanoparticle has interaction with DNA, entropy increases. The results of conformational energy and the hydrogen bond numbers for DNA indicated that DNA becomes unstable in the vicinity of a gold nanoparticle. The radial distribution function was calculated for water hydrogen–phosphate oxygen pairs. Almost for all nucleotide, the presence of a nanoparticle around DNA caused water molecules to be released from the DNA duplex and cations were close to the DNA.     

Folding simulations of Trp‐cage mini protein in explicit solvent using biasing potential replica‐exchange molecular dynamics simulations

Replica exchange molecular dynamics (RexMD) simulations are frequently used for studying structure formation and dynamics of peptides and proteins. A significant drawback of standard temperature RexMD is, however, the rapid increase of the replica number with increasing system size to cover a desired temperature range. A recently developed Hamiltonian RexMD method has been used to study folding of the Trp‐cage protein. It employs a biasing potential that lowers the backbone dihedral barriers and promotes peptide backbone transitions along the replica coordinate. In two independent applications of the biasing potential RexMD method including explicit solvent and starting from a completely unfolded structure the formation of near‐native conformations was observed after 30–40 ns simulation time. The conformation representing the most populated cluster at the final simulation stage had a backbone root mean square deviation of ～1.3 Å from the experimental structure. This was achieved with a very modest number of five replicas making it well suited for peptide and protein folding and refinement studies including explicit solvent. In contrast, during five independent continuous 70 ns molecular dynamics simulations formation of collapsed states but no near native structure formation was observed. The simulations predict a largely collapsed state with a significant helical propensity for the helical domain of the Trp‐cage protein already in the unfolded state. Hydrogen bonded bridging water molecules were identified that could play an active role by stabilizing the arrangement of the helical domain with respect to the rest of the chain already in intermediate states of the protein. Proteins 2009. © 2008 Wiley‐Liss, Inc.     

A comparative molecular dynamics study on BACE1 and BACE2 flap flexibility

Beta-amyloid precursor protein cleavage enzyme1 (BACE1) and beta-amyloid precursor protein cleavage enzyme2 (BACE2), members of aspartyl protease family, are close homologs and have high similarity in their protein crystal structures. However, their enzymatic properties are different, which leads to different clinical outcomes. In this study, we performed sequence analysis and all-atom molecular dynamic (MD) simulations for both enzymes in their ligand-free states in order to compare their dynamical flap behaviors. This is to enhance our understanding of the relationship between sequence, structure and the dynamics of this protein family. Sequence analysis shows that in BACE1 and BACE2, most of the ligand-binding sites are conserved, indicative of their enzymatic property as aspartyl protease members. The other conserved residues are more or less unsystematically localized throughout the structure. Herein, we proposed and applied different combined parameters to define the asymmetric flap motion; the distance, d₁, between the flap tip and the flexible region; the dihedral angle, φ, to account for the twisting motion and the TriCα angle, θ₂ and θ₁. All four combined parameters were found to appropriately define the observed “twisting” motion during the flaps different conformational states. Additional analysis of the parameters indicated that the flaps can exist in an ensemble of conformations, i.e. closed, semi-open and open conformations for both systems. However, the behavior of the flap tips during simulations is different between BACE1 and BACE2. The BACE1 active site cavity is more spacious as compared to that of BACE2. The analysis of 10S loop and 113S loop showed a similar trend to that of flaps, with the BACE1 loops being more flexible and less stable than those of BACE2. We believe that the results, methods and perspectives highlighted in this report would assist researchers in the discovery of BACE inhibitors as potential Alzheimer’s disease therapies.     

Asymmetric structure and domain binding interfaces of human tyrosyl‐tRNA synthetase studied by molecular dynamics simulations

Human tyrosyl‐tRNA synthetase (HsTyrRS) is composed of two structural modules: N‐terminal catalytic core and an EMAP II‐like C‐terminal domain. The structures of these modules are known, but no crystal structure of the full‐length HsTyrRS is currently available. An all‐atom model of the full‐length HsTyrRS was developed in this work. The structure, dynamics, and domain binding interfaces of HsTyrRS were investigated by extensive molecular dynamics (MD) simulations. Our data suggest that HsTyrRS in solution consists of a number of compact asymmetric conformations, which differ significantly by their rigidity, internal mobility, orientation of C‐terminal modules, and the strength of interdomain binding. Interfaces of domain binding obtained in MD simulations are in perfect agreement with our previous coarse‐grained hierarchical rotations technique simulations. Formation of the hydrogen bonds between R93 residue of the ELR cytokine motif and the residues A340 and E479 in the C‐module was observed. This observation supports the idea that the lack of cytokine activity in the full‐length HsTyrRS is explained by interactions between N‐modules and C‐modules, which block the ELR motif. Copyright © 2013 John Wiley & Sons, Ltd.     

Ribonucleotide reductase inhibition by p-alkoxyphenols studied by molecular docking and molecular dynamics simulations

Ribonucleotide reductase (RNR) is necessary for production of the precursor deoxyribonucleotides for DNA synthesis. Class Ia RNR functions via a stable free radical in one of the two components protein R2. The enzyme mechanism involves long range (proton coupled) electron transfer between protein R1 and the tyrosyl radical in protein R2. Earlier experimental studies showed that p-alkoxyphenols inhibit RNR. Here, molecular docking and molecular dynamics simulations involving protein R2 suggest an inhibition mechanism for p-alkoxyphenols . A low energy binding pocket is identified in protein R2. The preferred configuration provides a structural basis explaining their specific binding to the Escherichia coli and mouse R2 proteins. Trp48 (E. coli numbering), on the electron transfer pathway, is involved in the interactions with the inhibitors. The relative order of the binding energies calculated for the phenol derivatives to protein R2 is correlated with earlier experimental data on inhibition efficiency, in turn related to increasing size of the hydrophobic alkyl substituents. Using the configuration identified by molecular docking as a starting point for molecular dynamics simulations, we find that the p-allyloxyphenol interrupts the catalytic electron transfer pathway of the R2 protein by forming hydrogen bonds with Trp48 and Asp237, thus explaining the inhibitory activity of p-alkoxyphenols.     

Motion of groups of atoms in DNA studied by molecular dynamics simulation

The analysis of Molecular Dynamics simulations of two double stranded oligonucleotides is presented in terms of motions of quasi rigid subunits. First, a strategy is presented for grouping atoms submitted to concerted internal motions. The method is based on the analysis of the interatomic distance RMS matrix. It is found that each nucleotide can reasonably be decomposed into 3 or 4 rigid groups of atoms depending on the tolerance of the definition of a rigid body. In the second part, the different kinds of motions of the subunits (deformation, translation and rotation) are studied in terms of correlation using the canonical correlation analysis of data. It is shown that the residual deformation of any subunit does not influence the translational and rotational motions of the others, except perhaps for long time dynamics. Received: 3 October 1997 / Revised version: 22 December 1997 / Accepted: 23 December 1997     

CO migration pathways in cytochrome P450cam studied by molecular dynamics simulations

Previous laser flash photolysis investigations between 100 and 300 K have shown that the kinetics of CO rebinding with cytochrome P450(cam)(camphor) consist of up to four different processes revealing a complex internal dynamics after ligand dissociation. In the present work, molecular dynamics simulations were undertaken on the ternary complex P450(cam)(cam)(CO) to explore the CO migration pathways, monitor the internal cavities of the protein, and localize the CO docking sites. One trajectory of 1 nsec with the protein in a water box and 36 trajectories of 1 nsec in the vacuum were calculated. In each trajectory, the protein contained only one CO ligand on which no constraints were applied. The simulations were performed at 200, 300, and 320 K. The results indicate the presence of seven CO docking sites, mainly hydrophobic, located in the same moiety of the protein. Two of them coincide with xenon binding sites identified by crystallography. The protein matrix exhibits eight persistent internal cavities, four of which corresponding to the ligand docking sites. In addition, it was observed that water molecules entering the protein were mainly attracted into the polar pockets, far away from the CO docking sites. Finally, the identified CO migration pathways provide a consistent interpretation of the experimental rebinding kinetics.