Diazepam-Loaded Solid Lipid Nanoparticles: Design and Characterization

The aim of the present study was to investigate the feasibility of the inclusion of a water-insoluble drug (diazepam, DZ) into solid lipid nanoparticles (SLNs), which offer combined advantages of rapid onset and prolonged release of the drug. This work also describes a new approach to prepare suppositories containing DZ-loaded SLN dispersions, as potential drug carrier for the rectal route. Modified high-shear homogenization and ultrasound techniques were employed to prepare SLNs. The effect of incorporation of different concentrations of Compritol® ATO 888 or Imwitor® 900K and Poloxamer 188 or Tween 80 was investigated. Results showed that varying the type or concentration of lipid matrix or surfactant had a noticeable influence on the entrapment efficiencies, particle size, and release profiles of prepared SLNs. Differential scanning calorimetry and X-ray diffraction measurements showed that the majority of SLNs possessed less ordered arrangements of crystals than the corresponding bulk lipids, which was favorable for increasing the drug loading capacity. Transmission electron microscopy and laser diffractometry studies revealed that the prepared nanoparticles were round and homogeneous and 60% of the formulations were less than 500 nm. Additionally, SLN formulations showed significant (P?in vitro release of DZ from the suppositories prepared using DZ-loaded SLN dispersions (equivalent to 2 mg DZ) was significantly (P?相似文献   

壳聚糖和帕米膦酸双修饰的固体脂质纳米粒的制备

目的:制备壳聚糖和帕米膦酸双修饰的固体脂质纳米粒。方法:首先利用课题组发表的专利合成帕米膦酸修饰Brij78的新型非离子表面活性剂(Pa-Brij78),然后以壳聚糖(CS)溶液为水相,Pa-Brij78为乳化剂,E-Wax为油相,采用微乳法,利用修饰的帕米膦酸基团与壳聚糖分子链中质子化的氨基交联反应原理,通过一系列实验条件的探索,确定了最佳实验工艺条件,成功制备了壳聚糖和帕米膦酸双修饰的固体脂质纳米粒。通过动态光散射(DLS)粒径仪测定了纳米粒的粒径大小和Zeta电位;透射电子显微镜(TEM)对CS-Pa-Brij78-SLNs的形貌结构进行了表征。结果:实验结果显示,制备壳聚糖和帕米膦酸双修饰的固体脂质纳米粒的最佳条件为:p H=6.0,壳聚糖浓度分别为0.1%,0.2%;反应温度65℃,反应时间40 min,在该条件下,制备的壳聚糖和帕米膦酸双修饰的固体脂质纳米粒(CS-Pa-Brij78-SLNs)粒径分别为97.9±6.6 nm和182.4±62.2 nm,表面电位分别为(+5.21±1.4m V);(+7.94±0.80 m V),装载姜黄素时,载药量为10%,包封率在90%以上,透射电镜下观察其形态圆整,清晰可见壳聚糖包裹的电晕。结论:本文以壳聚糖(CS)溶液为水相,合成的新型非离子表面活性剂Pa-Brij78为乳化剂,E-Wax为油相,采用微乳化法,经过最佳实验条件的探索,通过一步法成功制备了稳定的壳聚糖和帕米膦酸双修饰的固体脂质纳米粒(CS-Pa-Brij78-SLNs)。     

Design and Characterization of Metformin-Loaded Solid Lipid Nanoparticles for Colon Cancer

Colorectal cancer is a global concern, and its treatment is fraught with non-selective effects including adverse side effects requiring hospital visits and palliative care. A relatively safe drug formulated in a bioavailability enhancing and targeting delivery platform will be of significance. Metformin-loaded solid lipid nanoparticles (SLN) were designed, optimized, and characterized for particle size, zeta potential, drug entrapment, structure, crystallinity, thermal behavior, morphology, and drug release. Optimized SLN were 195.01?±?6.03 nm in size, ?17.08?±?0.95 mV with regard to surface charge, fibrous in shape, largely amorphous, and release of metformin was controlled. The optimized size, charge, and shape suggest the solid lipid nanoparticles will migrate and accumulate in the colon tumor preventing its proliferation and subsequently leading to tumor shrinkage and cell death.     

Physical-Chemical Characterization and Formulation Considerations for Solid Lipid Nanoparticles

Pure glyceryl mono-oleate (GMO) (lipid) and different batches of GMO commonly used for the preparation of GMO-chitosan nanoparticles were characterized by modulated differential scanning calorimetry (MDSC), cryo-microscopy, and cryo-X-ray powder diffraction techniques. GMO-chitosan nanoparticles containing poloxamer 407 as a stabilizer in the absence and presence of polymers as crystallization inhibitors were prepared by ultrasonication. The effect of polymers (polyvinyl pyrrolidone (PVP), Eudragits, hydroxyl propyl methyl cellulose (HPMC), polyethylene glycol (PEG)), surfactants (poloxamer), and oils (mineral oil and olive oil) on the crystallization of GMO was investigated. GMO showed an exothermic peak at around ?10°C while cooling and another exothermic peak at around ?12°C while heating. It was followed by two endothermic peaks between 15 and 30 C, indicative of GMO melting. The results are corroborated by cryo-microscopy and cryo-X-ray. Significant differences in exothermic and endothermic transition were observed between different grades of GMO and pure GMO. GMO-chitosan nanoparticles resulted in a significant increase in particle size after lyophilization. MDSC confirmed that nanoparticles showed similar exothermic crystallization behavior of lipid GMO. MDSC experiments showed that PVP inhibits GMO crystallization and addition of PVP showed no significant increase in particle size of solid lipid nanoparticle (SLN) during lyophilization. The research highlights the importance of extensive physical-chemical characterization for successful formulation of SLN.     

固体脂质纳米粒制备方法的研究进展

固体脂质纳米粒是近年来备受关注的一种新型给药系统,本文对近年来固体脂质纳米粒的新型制备方法:薄膜接触器法、超声-挤压过滤法、微通道法、纳米反应嚣法的制备原理,方法及特点进行了讨论,并对现阶段存在的问题及今后的研究方向进行了展望.     

凝聚法制备川芎嗪固体脂质纳米粒

目的:制备川芎嗪固体脂质纳米粒.方法:采用凝聚法制备,并以包封率和载药量为指标采用正交设计法优化川芎嗪固体脂质纳米粒的制备工艺,并利用透射电镜、激光粒度分析仪、Zeta电位测定仪表征了其药剂学性质结果:所得川芎嗪固体脂质纳米粒的最佳制备处方是川芎嗪45mg,卵磷脂600mg,硬脂酸450mg,0.4%的泊洛沙姆60ml 结论:该处方可用于川芎嗪固体脂质纳米粒的制备,工艺简单、可行.     

固体脂质纳米粒的制备及应用研究进展

固体脂质纳米粒自1991年出现以来引起了广泛的关注,它综合了传统胶体给药系统如乳剂、脂质体及聚合物纳米粒等的优点,同时避免了它们的许多缺点。本文综述了纳米粒的制备方法及适合工业大生产的方法,介绍了固体脂质纳米粒的理化性质及其研究方法,并讨论了适合于固体脂质纳米粒的不同的给药途径。     

Preparation and Enhanced Oral Bioavailability of Cryptotanshinone-Loaded Solid Lipid Nanoparticles

In this study, solid lipid nanoparticles (SLNs) were successfully prepared by an ultrasonic and high-pressure homogenization method to improve the oral bioavailability of the poorly water-soluble drug cryptotanshinone (CTS). The particle size and distribution, drug loading capacity, drug entrapment efficiency, zeta potential, and long-term physical stability of the SLNs were characterized in detail. A pharmacokinetic study was conducted in rats after oral administration of CTS in different SLNs, and it was found that the relative bioavailability of CTS in the SLNs was significantly increased compared with that of a CTS-suspension. The incorporation of CTS in SLNs also markedly changes the metabolism behavior of CTS to tanshinone IIA. These results indicate that CTS absorption is enhanced significantly by employing SLN formulations, and SLNs represent a powerful approach for improving the oral absorption of poorly soluble drugs.     

Preparation,Characterization, and Optimization of Folic Acid-Chitosan-Methotrexate Core-Shell Nanoparticles by Box-Behnken Design for Tumor-Targeted Drug Delivery

The objective of this study was to investigate the combined influence of independent variables in the preparation of folic acid-chitosan-methotrexate nanoparticles (FA-Chi-MTX NPs). These NPs were designed and prepared for targeted drug delivery in tumor. The NPs of each batch were prepared by coaxial electrospray atomization method and evaluated for particle size (PS) and particle size distribution (PSD). The independent variables were selected to be concentration of FA-chitosan, ratio of shell solution flow rate to core solution flow rate, and applied voltage. The process design of experiments (DOE) was obtained with three factors in three levels by Design expert software. Box-Behnken design was used to select 15 batches of experiments randomly. The chemical structure of FA-chitosan was examined by FTIR. The NPs of each batch were collected separately, and morphologies of NPs were investigated by field emission scanning electron microscope (FE-SEM). The captured pictures of all batches were analyzed by ImageJ software. Mean PS and PSD were calculated for each batch. Polynomial equation was produced for each response. The FE-SEM results showed the mean diameter of the core-shell NPs was around 304 nm, and nearly 30% of the produced NPs are in the desirable range. Optimum formulations were selected. The validation of DOE optimization results showed errors around 2.5 and 2.3% for PS and PSD, respectively. Moreover, the feasibility of using prepared NPs to target tumor extracellular pH was shown, as drug release was greater in the pH of endosome (acidic medium). Finally, our results proved that FA-Chi-MTX NPs were active against the human epithelial cervical cancer (HeLa) cells.     

Mixed Polyethylene Glycol-Modified Breviscapine-Loaded Solid Lipid Nanoparticles for Improved Brain Bioavailability: Preparation,Characterization, and In Vivo Cerebral Microdialysis Evaluation in Adult Sprague Dawley Rats

Breviscapine is used in the treatment of ischemic cerebrovascular diseases, but it has a low bioavailability in the brain due to its poor physicochemical properties and the activity of P-glycoprotein efflux pumps located at the blood–brain barrier. In the present study, breviscapine-loaded solid lipid nanoparticles (SLN) coated with polyethylene glycol (PEG) derivatives were formulated and evaluated for their ability to enhance brain bioavailability. The SLNs were either coated with polyethylene glycol (40) (PEG-40) stearate alone (Bre-GBSLN-PS) or a mixture of PEG-40 stearate and 1,2-distearoyl-sn-glycero-3-phosphoethanolamine-N-PEG2000 (DSPE-PEG₂₀₀₀) (Bre-GBSLN-PS-DSPE) and were characterized both in vitro and in vivo. The mean particle size, polydispersity index, and entrapment efficiency for Bre-GBSLN-PS and Bre-GBSLN-PS-DSPE were 21.60 ± 0.10 and 22.60 ± 0.70 nm, 0.27 ± 0.01 and 0.26 ± 0.04, and 46.89 ± 0.73% and 47.62 ± 1.86%, respectively. The brain pharmacokinetic parameters revealed that the brain bioavailability of breviscapine from the Bre-GBSLN-PS and Bre-GBSLN-PS-DSPE was significantly enhanced (p < 0.01) with the area under concentration–time curve (AUC) of 1.59 ± 0.39 and 1.42 ± 0.58 μg h/mL of breviscapine, respectively, in comparison to 0.11 ± 0.02 μg h/mL from the commercial breviscapine injection. The ratios of the brain AUC for scutellarin in comparison with the plasma scutellarin AUC for commercial breviscapine injection, Bre-GBSLN-PS, and Bre-GBSLN-PS-DSPE were 0.66%, 2.82%, and 4.51%, respectively. These results showed that though both SLN formulations increased brain uptake of breviscapine, Bre-GBSLN-PS-DSPE which was coated with a binary combination of PEG-40 stearate and DSPE-PEG₂₀₀₀ had a better brain bioavailability than Bre-GBSLN-PS. Thus, the coating of SLNs with the appropriate PEG derivative combination could improve brain bioavailability of breviscapine and can be a promising tool for brain drug delivery.KEY WORDS: breviscapine, microdialysis, mixed PEGylation, P-glycoprotein (P-gp), solid lipid nanoparticles     

固体脂质纳米粒的制备及在治疗中的应用研究

固体脂质纳米粒(SLN)是20世纪90年代发展起来的一种性能优异的新型纳米粒给药剂型作为一种新型载体,可有效提高包封药物的稳定性、提高病变部位靶向性、低毒性与组织亲和性,为药物的体内递送提供了一种新的方法。本文主要针对固体脂质纳米粒的制备,发展现状,目前存在的问题及解决思路等作以介绍与总结。并在此基础上,介绍了新的脂质纳米粒,纳米脂质载体(nanostructured lipid carriers,NLC)和药脂结合物纳米粒(Lipid drug conjugate nanoparticles,LDC),以及未来固体脂质纳米粒的发展方向。     

蛙凝素修饰聚谷氨酸纳米粒的制备、表征及Calu-3细胞摄取研究

目的:考察蛙凝素(Odorranalectin,OL)修饰对聚谷氨酸苄酯-聚乙二醇纳米粒(PBLG-PEG-NPs)材料的Calu-3细胞(人肺腺癌细胞)毒性和细胞摄取作用的影响。方法:碘氧化法制备蛙凝素修饰聚合物材料;以姜黄素(curcumin,Cur)为模型药物,采用乳化溶媒蒸发法制备聚谷氨酸苄酯-聚乙二醇纳米粒(PBLG-PEG-NPs)和蛙凝素修饰聚谷氨酸苄酯-聚乙二醇纳米粒(OL-PBLG-PEG-NPs);MTT法考察三种纳米粒对Calu-3的细胞毒性;采用激光共聚焦显微镜对两种纳米粒的Calu-3细胞摄取作用进行定性观察。结果:给予高浓度(2 mg·mL-1)纳米粒培养Calu-3细胞时,细胞存活率大于75%。蛙凝素修饰纳米粒后其被细胞摄取的量从62.7%增加到了81.2%。结论:OL可用于黏膜给药载体的修饰,OL-PBLG-PEG-NPs细胞毒性低、生物相容性好,有望成为一种鼻腔粘膜给药优良载体。     

Preparation and Evaluation of Miconazole Nitrate-Loaded Solid Lipid Nanoparticles for Topical Delivery

The purpose of this study was to prepare miconazole nitrate (MN) loaded solid lipid nanoparticles (MN-SLN) effective for topical delivery of miconazole nitrate. Compritol 888 ATO as lipid, propylene glycol (PG) to increase drug solubility in lipid, tween 80, and glyceryl monostearate were used as the surfactants to stabilize SLN dispersion in the SLN preparation using hot homogenization method. SLN dispersions exhibited average size between 244 and 766 nm. All the dispersions had high entrapment efficiency ranging from 80% to 100%. The MN-SLN dispersion which showed good stability for a period of 1 month was selected. This MN-SLN was characterized for particle size, entrapment efficiency, and X-ray diffraction. The penetration of miconazole nitrate from the gel formulated using selected MN-SLN dispersion as into cadaver skins was evaluated ex-vivo using franz diffusion cell. The results of differential scanning calorimetry (DSC) showed that MN was dispersed in SLN in an amorphous state. The MN-SLN formulations could significantly increase the accumulative uptake of MN in skin over the marketed gel and showed a significantly enhanced skin targeting effect. These results indicate that the studied MN-SLN formulation with skin targeting may be a promising carrier for topical delivery of miconazole nitrate.     

Preparation and Optical Characterization of Core–Shell Bimetal Nanoparticles

Chemical approaches allow for the synthesis of highly defined metal heteronanostructures, such as core–shell nanospheres. Because the material in the metal nanoparticles determines the plasmon resonance-induced absorption band, control of particle composition results in control of the position of the absorption band. Metal deposition on gold or silver nanoparticles yielded core–shell particles with modified optical properties. UV–vis spectroscopy on solution-grown, as well as surface-grown, particles was conducted and provided ensemble measurements in solution. Increasing the layers of a second metal leads to a shift in the absorption band. A shell diameter comparable to the original particle diameter leads to a predominant influence by the shell material. Extent of shell growth could be controlled by reaction time or the concentration of metal salt or reducing agent. Besides optical characterization, the utilization of atomic force microscopy, scanning electron microscopy, and transmission electron microscopy yielded important information about the ultrastructure of nanoparticle complexes. Surface-grown core–shell particles were superior in terms of achievable shell thickness, because of difficulties encountered with solution-grown particles due to salt-induced aggregation.     

羟基喜树碱纳米颗粒超声反溶剂法制备工艺及表征

为提高羟基喜树碱的水溶性及其制剂在体内稳定性,运用超声反溶剂法对羟基喜树碱进行初级颗粒制备。本文根据羟基喜树碱在不同有机溶剂中的溶解度与其在去离子水中的溶解度的不同进行对比,对各项指标进行检测。筛选出制备羟基喜树碱初级颗粒的最佳条件为:HCPT-DMSO浓度为5 mg·mL-1、H2O∶DMSO=1∶1、H2O滴速为4 mL·min-1,超声时间为10 min。对羟基喜树碱初级纳米颗粒进行检测,SEM扫描结果显示其形貌规则,粒径为746 nm,与羟基喜树碱原粉颗粒相比,粒径明显减小并在其水溶液中分布更为均匀。     

Development of Duloxetine Hydrochloride Loaded Mesoporous Silica Nanoparticles: Characterizations and In Vitro Evaluation

This study investigated the potential use of mesoporous silica nanoparticles (MSNs) as a carrier for duloxetine hydrochloride (DX), which is prone to acid degradation. Sol–gel and solvothermal methods were used to synthesize the MSNs, which, after calcination and drug loading, were then characterized using X-ray diffraction (XRD), Brunauer-Emmett-Teller (BET) technique, thermogravimetric analysis (TGA), Fourier transform infrared (FT-IR) spectroscopy, scanning electron microscopy (SEM), differential scanning calorimetry (DSC), and diffuse reflectance ultraviolet-visible (DRS-UV-Vis) spectroscopy. Releases of DX from the MSNs were good in pH 7.4 (90%) phosphate buffer but poor in acidic pH (40%). In a comparative release study between the MSNs in phosphate buffer, TW60-3DX showed sustained release for 140 h, which was higher than the other nanoparticles. The mechanism of DX release from the MSNs was studied using Peppas kinetics model. The “n” value of all three MSNs ranged from 0.45 to 1 with a correlation coefficient (r²) >0.9, which indicated that the release of the drug from the system follows the anomalous transport or non-Fickian diffusion. The results supported the efficacy of mesoporous silica nanoparticles synthesized here as a promising carrier for duloxetine hydrochloride with higher drug loading and greater pH-sensitive release.

Electronic supplementary material

The online version of this article (doi:10.1208/s12249-014-0273-x) contains supplementary material, which is available to authorized users.KEY WORDS: controlled release, duloxetine hydrochloride, meso silica nanoparticles, sol–gel synthesis     

Preparation and Characterization of Octenyl Succinic Anhydride Modified Taro Starch Nanoparticles

The polar surface and hydrophilicity of starch nanoparticles (SNPs) result in their poor dispersibility in nonpolar solvent and poor compatibility with hydrophobic polymers, which limited the application in hydrophobic system. To improve their hydrophobicity, SNPs prepared through self-assembly of short chain amylose debranched from cooked taro starch, were modified by octenyl succinic anhydride (OSA). Size via dynamic light scattering of OSA-SNPs increased compared with SNPs. Fourier transform infrared spectroscopy data indicated the OSA-SNPs had a new absorption peak at 1727 cm^-1, which was the characteristic peak of carbonyl, indicating the formation of the ester bond. The dispersibility of the modified SNPs in the mixture of water with nonpolar solvent increased with increasing of degree of substitution (DS). OSA-SNPs appear to be a potential agent to stabilize the oil-water systems.     

Physicochemical Characterization of Berberine Chloride: A Perspective in the Development of a Solution Dosage Form for Oral Delivery

The objective of the present research was to evaluate the physicochemical characteristics of berberine chloride and to assess the complexation of drug with 2-hydroxypropyl-β-cyclodextrin (HPβCD), a first step towards solution dosage form development. The parameters such as log P value were determined experimentally and compared with predicted values. The pH-dependent aqueous solubility and stability were investigated following standard protocols at 25°C and 37°C. Drug solubility enhancement was attempted utilizing both surfactants and cyclodextrins (CDs), and the drug/CD complexation was studied employing various techniques such as differential scanning calorimetry, Fourier transform infrared, nuclear magnetic resonance, and scanning electron microscopy. The experimental log P value suggested that the compound is fairly hydrophilic. Berberine chloride was found to be very stable up to 6 months at all pH and temperature conditions tested. Aqueous solubility of the drug was temperature dependent and exhibited highest solubility of 4.05 ± 0.09 mM in phosphate buffer (pH 7.0) at 25°C, demonstrating the effect of buffer salts on drug solubility. Decreased drug solubility was observed with increasing concentrations of ionic surfactants such as sodium lauryl sulfate and cetyl trimethyl ammonium bromide. Phase solubility studies demonstrated the formation of berberine chloride–HPβCD inclusion complex with 1:1 stoichiometry, and the aqueous solubility of the drug improved almost 4.5-fold in the presence of 20% HPβCD. The complexation efficiency values indicated that the drug has at least threefold greater affinity for hydroxypropyl-β-CD compared to randomly methylated-β-CD. The characterization techniques confirmed inclusion complex formation between berberine chloride and HPβCD and demonstrated the feasibility of developing an oral solution dosage form of the drug.KEY WORDS: berberine chloride, complexation, cyclodextrin, solubility, surfactants