Interchain disulphide bridges of mouse immunoglobulin M.

Mouse IgM (immunoglobulin M) was selectively and partially reduced and treated with iodo[2-14C]acetate to label the interchain disulphide bridges. The carboxymethylation was studied in some detail. The labelled peptides were purified, sequenced and positioned by homology with human IgM. Only peptides originating from three interchain disulphide bridges were labelled, in contrast with the four labelled bridges obtained in human IgM under the same conditions. These peptides are homologous to human bridge peptides forming the heavy-light bridge and two inter-heavy bridges, one present in the CMU2 region and the other in the C-terminal region. The inter-heavy bridge in the Cmu2 region was alone cleaved and radioactively labelled in selectively reduced IgM held together as a pentamer by non-covalen interactions. The same bridge was the only one to be totally cleaved in subunits released after more extensive, though still selective, reduction. In the light of these results a possible arrangement of the disulphide bridges of the mouse IgM.     

Amino acid sequences around the disulphide bridges and methionine residues of porcine pepsin

1. The amino acid sequences around three disulphide bridges and four methionine residues of porcine pepsin were studied by using diagonal electrophoresis methods. 2. Two of the three disulphide bridges were in small loops of five and six residues. The sequence around one of the two half-cystine residues of the third disulphide bridge had a large number of acidic residues. 3. The sequence of a tetrapeptide containing phosphoserine was also determined. 4. Four unique methionine-containing sequences were constructed. The information is sufficient for the determination of the overlaps in the cyanogen bromide fragments of pepsin. 5. The usefulness of diagonal methods in the study of protein structure, the relative positions of cystinyl and methionyl residues in porcine pepsin and the homology between pepsin and rennin are discussed.     

The disulphide bridges of immunoglobulin κ-chains

The arrangement of the disulphide bridges of the major component of the light chains of immunoglobulins (kappa-chains) has been studied in the Bence-Jones proteins. Three disulphide bridges have been found. An interchain bridge at the C-terminus has been shown to occur in the dimers of all the proteins studied and was characterized by symmetrical peptides. In the monomer form, the C-terminal half-cystine of the corresponding peptides was linked to a lone half-cystine residue. A second common disulphide-bridge peptide in which a single amino acid difference could be related to the Inv factors of the individual proteins was found in Bence-Jones proteins and in the kappa-chains of normal and abnormal immunoglobulins. Peptides characteristic of a third disulphide bridge studied in three specimens were found to have differences in some residues, but also striking similarities. A methionine peptide has also been characterized in two specimens as a by-product of the technique employed. It is suggested that a general manner of folding may be a common feature of the heterogeneous population of kappa-chains: one bridge which folds an invariable stretch of the chain, another bridge which folds a stretch that varies from protein to protein, and a bridge at the C-terminus which is the interchain link.     

The disulphide bridges of a mouse immunoglobulin G1 protein

[(35)S]Cystine-labelled immunoglobulin MOPC21 (IgG1) was prepared from myeloma cells in tissue culture. Carrier myeloma protein was added and the protein was digested with pepsin. The digest was fractionated on Sephadex G-50 into two fractions, further digested with trypsin and again fractionated on Sephadex. Disulphide-bridge peptides were purified by electrophoresis and chromatography and identified by radioautography. A peptide of 96 residues was isolated, which contains both the heavy-light interchain disulphide bridge and all the inter-heavy-chain disulphide bridges. Other peptides were isolated, accounting for all the intrachain disulphide bridges (which could be placed by homology with proteins of other species), except for the variable section of the light chain. Sequences describing this missing disulphide bridge were obtained from totally reduced and alkylated light chains. Peptides related to the interchain disulphide-bridge peptide were isolated from partially reduced and alkylated myeloma protein and from totally reduced heavy chain. The interchain disulphide-bridge peptide was placed at the C-terminal position of the F(ab')(2) fragment, prepared by digestion of the protein with pepsin at pH4.0. Sequences from the heavy-chain intrachain disulphide bridges of MOPC 21 immunoglobulin are compared with homologous sequences from mouse myeloma proteins of other subclasses and proteins of other species.     

Primary structure of the A chain of human complement-classical-pathway enzyme C1r. N-terminal sequences and alignment of autolytic fragments and CNBr-cleavage peptides.

Activated human complement-classical-pathway enzyme C1r has previously been shown to undergo autolytic cleavages occurring in the A chain [Arlaud, Villiers, Chesne & Colomb (1980) Biochim. Biophys. Acta 616, 116-129]. Chemical analysis of the autolytic products confirms that the A chain undergoes two major cleavages, generating three fragments, which have now been isolated and characterized. The N-terminal alpha fragment (approx. 210 residues long) has a blocked N-terminus, as does the whole A chain, whereas N-terminal sequences of fragments beta and gamma (approx. 66 and 176 residues long respectively) do not, and their N-terminal sequences were determined. Fragments alpha, beta and gamma, which are not interconnected by disulphide bridges, are located in this order within C1r A chain. Fragment gamma is disulphide-linked to the B chain of C1r, which is C-terminal in the single polypeptide chain of precursor C1r. CNBr cleavage of C1r A chain yields seven major peptides, CN1b, CN4a, CN2a, CN1a, CN3, CN4b and CN2b, which were positioned in that order, on the basis of N-terminal sequences of the methionine-containing peptides generated from tryptic cleavage of the succinylated (3-carboxypropionylated) C1r A chain. About 60% of the sequence of C1r A chain (440-460 residues long) was determined, including the complete sequence of the C-terminal 95 residues. This region shows homology with the corresponding parts of plasminogen and chymotrypsinogen and, more surprisingly, with the alpha 1 chain of human haptoglobin 1-1, a serine proteinase homologue.     

Effect of mutations of N- and C-terminal charged residues on the activity of LCAT

On the basis of structural homology calculations, we previously showed that lecithin:cholesterol acyltransferase (LCAT), like lipases, belongs to the alpha/beta hydrolase fold family. As there is higher sequence conservation in the N-terminal region of LCAT, we investigated the contribution of the N- and C-terminal conserved basic residues to the catalytic activity of this enzyme. Most basic, and some acidic residues, conserved among LCAT proteins from different species, were mutated in the N-terminal (residues 1;-210) and C-terminal (residues 211;-416) regions of LCAT. Measurements of LCAT-specific activity on a monomeric substrate, on low density lipoprotein (LDL), and on reconstituted high density lipoprotein (rHDL) showed that mutations of N-terminal conserved basic residues affect LCAT activity more than those in the C-terminal region. This agrees with the highest conservation of the alpha/beta hydrolase fold and structural homology with pancreatic lipase observed for the N-terminal region, and with the location of most of the natural mutants reported for human LCAT. The structural homology between LCAT and pancreatic lipase further suggests that residues R80, R147, and D145 of LCAT might correspond to residues R37, K107, and D105 of pancreatic lipase, which form the salt bridges D105-K107 and D105-R37. Natural and engineered mutations at residues R80, D145, and R147 of LCAT are accompanied by a substantial decrease or loss of activity, suggesting that salt bridges between these residues might contribute to the structural stability of the enzyme.     

Affinity of Avr2 for tomato cysteine protease Rcr3 correlates with the Avr2-triggered Cf-2-mediated hypersensitive response

The Cladosporium fulvum Avr2 effector is a novel type of cysteine protease inhibitor with eight cysteine residues that are all involved in disulphide bonds. We have produced wild-type Avr2 protein in Pichia pastoris and determined its disulphide bond pattern. By site-directed mutagenesis of all eight cysteine residues, we show that three of the four disulphide bonds are required for Avr2 stability. The six C-terminal amino acid residues of Avr2 contain one disulphide bond that is not embedded in its overall structure. Avr2 is not processed by the tomato cysteine protease Rcr3 and is an uncompetitive inhibitor of Rcr3. We also produced mutant Avr2 proteins in which selected amino acid residues were individually replaced by alanine, and, in one mutant, all six C-terminal amino acid residues were deleted. We determined the inhibitory constant (K(i) ) of these mutants for Rcr3 and their ability to trigger a Cf-2-mediated hypersensitive response (HR) in tomato. We found that the two C-terminal cysteine residues and the six amino acid C-terminal tail of Avr2 are required for both Rcr3 inhibitory activity and the ability to trigger a Cf-2-mediated HR. Individual replacement of the lysine-17, lysine-20 or tyrosine-21 residue by alanine did not affect significantly the biological activity of Avr2. Overall, our data suggest that the affinity of the Avr2 mutants for Rcr3 correlates with their ability to trigger a Cf-2-mediated HR.     

Large-scale prediction of disulphide bridges using kernel methods, two-dimensional recursive neural networks, and weighted graph matching

The formation of disulphide bridges between cysteines plays an important role in protein folding, structure, function, and evolution. Here, we develop new methods for predicting disulphide bridges in proteins. We first build a large curated data set of proteins containing disulphide bridges to extract relevant statistics. We then use kernel methods to predict whether a given protein chain contains intrachain disulphide bridges or not, and recursive neural networks to predict the bonding probabilities of each pair of cysteines in the chain. These probabilities in turn lead to an accurate estimation of the total number of disulphide bridges and to a weighted graph matching problem that can be addressed efficiently to infer the global disulphide bridge connectivity pattern. This approach can be applied both in situations where the bonded state of each cysteine is known, or in ab initio mode where the state is unknown. Furthermore, it can easily cope with chains containing an arbitrary number of disulphide bridges, overcoming one of the major limitations of previous approaches. It can classify individual cysteine residues as bonded or nonbonded with 87% specificity and 89% sensitivity. The estimate for the total number of bridges in each chain is correct 71% of the times, and within one from the true value over 94% of the times. The prediction of the overall disulphide connectivity pattern is exact in about 51% of the chains. In addition to using profiles in the input to leverage evolutionary information, including true (but not predicted) secondary structure and solvent accessibility information yields small but noticeable improvements. Finally, once the system is trained, predictions can be computed rapidly on a proteomic or protein-engineering scale. The disulphide bridge prediction server (DIpro), software, and datasets are available through www.igb.uci.edu/servers/psss.html.     

Engineering new peptidic inhibitors from a natural chymotrypsin inhibitor.

Three model peptides of different sizes (17-24 amino acid residues) mimicking the chymotrypsin inhibitor SCGI (a peptide of 35 amino acid residues) isolated from Schistocerca gregaria were designed and prepared by convergent peptide synthesis. Selective formation of disulphide bridges in the closing step was achieved without selective protection of cysteine residues. The natural pattern of the two disulphide bridges was determined by 2D homonuclear 1H NMR techniques. All three model peptides were characterized by amino acid analysis. MS and CD spectra. Preliminary results revealed that the two smaller model peptides exhibit no Inhibitory activity, whereas the larger one shows limited inhibition of chymotrypsin.     

Comparison of amino acid sequences between phosphoenolpyruvate carboxylases from Escherichia coli (allosteric) and Anacystis nidulans (non-allosteric): identification of conserved and variable regions

Amino acid sequences of phosphoenolpyruvate carboxylases of Escherichia coli (allosteric) and a cyanobacterium Anacystis nidulans (non-allosteric) were aligned. The pattern of homology suggests that the enzyme molecule is comprised of two distinct regions, namely, a conserved region (C-terminal half) and a variable region (N-terminal half). Among the amino acid residues which have previously been presumed essential for the catalytic activity, three histidine residues were found to be conserved, but cysteine residues were not. Furthermore, the conserved sequence unique to the enzyme was identified by comparison of the enzyme sequence with amino acid sequences in our data bank.     

Amino acid neighbours and detailed conformational analysis of cysteines in proteins.

Here we present an investigation of the contacts that cysteines make with residues in their three-dimensional environment and a comprehensive analysis of the conformational features of 351 disulphide bridges in 131 non-homologous single-chain protein structures. Upstream half-cystines preferentially have downstream neighbours, whereas downstream half-cystines have mainly upstream neighbours. Non-disulphide bridged cysteines (free cysteines) have no preference for upstream or downstream neighbours. Free cysteines have more contacts to non-polar residues and fewer contacts to polar/charged residues than half-cystines, which correlates with our observation that free cysteines are more buried than half-cystines. Free cysteines prefer to be located in alpha-helices while no clear preference is observed for half-cystines. Histidine and methionine are preferentially seen nearby free cysteines. Tryptophan is found preferentially nearby half-cystines. We have merged sequential and spatial information, and highly interesting novel patterns have been discovered. The number of cysteines per protein is typically an even number, peaking at four. The number of residues separating two half-cystines is preferentially 11 and 16. Left-handed and right-handed disulphide bridges display different conformational parameters. Here we present side chain torsion angle information based on a 5-12 times larger number of disulphide bridges than has previously been published. Considering the importance of cysteines for maintaining the 3D-structural scaffold of proteins, it is essential to have as accurate information as possible concerning the packing and conformational preferences. The present work may provide key information for engineering the protein environment around cysteines.     

Molecular cloning and characterization of four scorpion K(+)-toxin-like peptides: a new subfamily of venom peptides (alpha-KTx14) and genomic analysis of a member.

Four full-length cDNAs encoding the precursors of four K(+)-toxin-like peptides (named BmKK(1), BmKK(2), BmKK(3) and BmmKK(4), respectively) were first isolated from a venom gland cDNA library of the Chinese scorpion Buthus martensii Karsch. The deduced precursors of BmKK(1), BmKK(2) and BmKK(3) are all made of 54 amino acid residues including a signal peptide of 23 residues, and a mature toxin of 31 residues with three disulfide bridges. The precursor of BmKK(4) is composed of 55 amino acid residues including a signal peptide of 23 residues, a mature toxin of 30 residues cross-linked by three disulfide bridges, and an extra Gly-Lys tail which should be removed in the processing step. The four peptides displayed 24-97% sequence identity with each other, and less than 27% homology with any other scorpion toxins described. However, they shared a common disulfide bridge pattern, which was consistent with that of most short-chain K(+)-toxins, suggesting they represent a new class of scorpion toxins and their target receptors may be a subfamily of K(+) channels. We classified the BmKK toxin subfamily as alpha-KTx14 according to the classification rules. The genomic sequence of BmKK(2) was also cloned and sequenced. It consisted of two exons, disrupted by an intron of 79 bp inserted in the region encoding the C-terminal part of the signal peptide. This structure was very similar to that of other K(+)-toxins described previously.     

Disulphide bridges of the heavy chain of human immunoglobulin G2

Amino acid sequences around the disulphide bridges of the heavy chain of an immunoglobulin of the gamma2 subclass have been studied. The protein was digested with pepsin and the digest fractionated by Sephadex. Screening of the eluate by one-dimensional electrophoresis of oxidized and unoxidized samples was used as an assay and pools of fractions were prepared. Identification by diagonal electrophoresis of several inter- and intra-chain disulphide bridges was done on the pooled fractions. The inter-heavy-chain bridged peptide included four cystine residues. Comparison with proteins of other human subclasses indicated that the intrachain bridges identified are the bridges of the invariable section of gamma2 heavy chains. The amino acid sequence of one cysteic acid peptide that may have been derived from the variable part of the molecule was determined. Partial reduction followed by carboxymethylation with radioactive iodoacetate of two proteins of the gamma2 class showed a number of labelled peptides that could be identified as being related to the inter-chain bonded cystine residues.     

Intramolecular disulphide bond arrangements in nonhomologous proteins

The presence and location of intramolecular disulphide bonds are a key determinant of the structure and function of proteins. Intramolecular disulphide bonds in proteins have previously been analyzed under the assumption that there is no clear relationship between disulphide arrangement and disulphide concentration. To investigate this, a set of sequence nonhomologous protein chains containing one or more intramolecular disulphide bonds was extracted from the Protein Data Bank, and the arrangements of the bonds, Protein Data Bank header, and Structural Characterization of Proteins fold were analyzed as a function of intramolecular disulphide bond concentration. Two populations of intramolecular disulphide bond-containing proteins were identified, with a naturally occurring partition at 25 residues per bond. These populations were named intramolecular disulphide bond-rich and -poor. Benefits of partitioning were illustrated by three results: (1) rich chains most frequently contained three disulphides, explaining the plateaux in extant disulphide frequency distributions; (2) a positive relationship between median chain length and the number of disulphides, only seen when the data were partitioned; and (3) the most common bonding pattern for chains with three disulphide bonds was based on the most common for two, only when the data were partitioned. The two populations had different headers, folds, bond arrangements, and chain lengths. Associations between IDSB concentration, IDSB bonding pattern, loop sizes, SCOP fold, and PDB header were also found. From this, we found that intramolecular disulphide bond-rich and -poor proteins follow different bonding rules, and must be considered separately to generate meaningful models of bond formation.     

NMR structure of a minimized human agouti related protein prepared by total chemical synthesis.

The structure of the chemically synthesized C-terminal region of the human agouti related protein (AGRP) was determined by 2D 1H NMR. Referred to as minimized agouti related protein, MARP is a 46 residue polypeptide containing 10 Cys residues involved in five disulfide bonds that retains the biological activity of full length AGRP. AGRP is a mammalian signaling molecule, involved in weight homeostasis, that causes adult onset obesity when overexpressed in mice. AGRP was originally identified by homology to the agouti protein, another potent signaling molecule involved in obesity disorders in mice. While AGRP's exact mechanism of action is unknown, it has been identified as a competitive antagonist of melanocortin receptors 3 and 4 (MC3r, MC4r), and MC4r in particular is implicated in the hypothalamic control of feeding behavior. Full length agouti and AGRP are only 25% homologous, however, their active C-terminal regions are approximately 40% homologous, with nine out of the 10 Cys residues spatially conserved. Until now, 3D structures have not been available for either agouti, AGRP or their C-terminal regions. The NMR structure of MARP reported here can be characterized as three major loops, with four of the five disulfide bridges at the base of the structure. Though its fold is well defined, no canonical secondary structure is identified. While previously reported structural models of the C-terminal region of AGRP were attempted based on Cys homology between AGRP and certain toxin proteins, we find that Cys spacing is not sufficient to correctly determine the 3D fold of the molecule.     

Characterization of a gene encoding a Pichia pastoris protein disulfide isomerase

Protein disulphide isomerases belong to the thioredoxin superfamily of protein-thiol oxidoreductases that have two double-cysteine redox-active sites and take part in protein folding in the endoplasmic reticulum (ER). We report here the cloning of a Pichia pastoris genomic DNA fragment (2919 bp) that encodes the full length of a protein disulphide isomerase (PpPDI). The deduced amino acid sequence of PDI consists of 517 residues and carries the two characteristic PDI-type redox-active domains -CGHC-, separated by 338 residues, and two potential N-glycosylation sites. The N-terminal end forms a putative signal sequence, and an acidic C-terminal region represents a possible calcium-binding domain. Together with the -HDEL ER retrieval sequence at the C-terminus, these features indicate that the gene encodes a redox-active ER-resident protein disulphide isomerase. The nucleotide sequence, which also contains two other open reading frames, has been submitted to the EMBL Nucleotide Sequence Database, Accession No. AJ302014.     

Intrachain disulphide bridges in immunoglobulin G heavy chains. The Fc fragment

The disulphide bridges of the Fc fragment (C-terminal half of the heavy chain) have been studied in several human immunoglobulins, containing heavy chains of different antigenic types (gamma1, gamma2, gamma3 and gamma4), and in heavy-chain-disease proteins. Two intrachain disulphide bridges were found to be present. The sequences appear to be identical in the Fc fragments of two types of chain studied (gamma1 and gamma3), and very similar to corresponding sequences of the Fc fragment in rabbit. These results suggest that the C-terminal half of the heavy chains is covalently folded (in a similar fashion to the light chains) with a C-terminal loop and an N-terminal loop. The similarity is emphasized by comparison of the sequence and location of the disulphide-bridged peptides of the C-terminal loop of heavy and light chains. The N-terminal loop, on the other hand, appears to be very different in Fc fragments and light chains. The C-terminal loop is the only one present in the F'c fragment.     

Purification and chemical properties of two 1,3;1,4-beta-glucan endohydrolases from germinating barley

Two 1,3;1,4-beta-glucan endohydrolases have been purified from extracts of germinating barley by ammonium sulphate precipitation, ion-exchange and gel filtration chromatography. Both enzymes are monomeric, basic proteins. Enzyme I has a molecular weight of 28000 and an isoelectric point of 8.5, while enzyme II has a molecular weight of 33000 and an isoelectric point greater than 10. Enzyme II is a glycoprotein containing 3.6% carbohydrate, of which three residues are probable N-acetylglucosamine, but enzyme I contains only traces of associated carbohydrate. The amino acid compositions of the two 1,3;1,4-beta-glucan endohydrolases are similar and the cross-reactivity of antibodies raised against the purified enzymes suggests that they share common antigenic determinants.     

A de novo designed N-terminal disulphide bridge stabilizes the Trichoderma reesei endo-1,4-beta-xylanase II

We have successfully engineered a disulphide bridge into the N-terminal region of Trichoderma reesei endo-1,4-beta-xylanase II (XYNII) by substituting Thr-2 and Thr-28 with cysteine. The T2C:T28C mutational changes increased the half-life in thermal inactivation of this mesophilic enzyme from approximately 40 s to approximately 20 min at 65 degrees C, and from less than 10 s to approximately 6 min at 70 degrees C. Therefore, the N-terminal disulphide bridge enables the use of XYNII at substantially higher temperatures than permitted by its native mesophilic counterpart. Altogether, thermostability increased by about 15 degrees C. The kinetic properties of the mutant XYNII were maintained at the level of the wild type enzyme. Our findings demonstrated that a properly designed disulphide bridge, here within the N-terminal region of XYNII, can be very effective in resisting thermal inactivation.     

Fc and Fab Fragments from IgG<Subscript>2</Subscript> Human Immunoglobulins Characterized

Papain digestion of 7S immunoglobulin G (IgG) produces two 3.5S Fab fragments and one 3.5S Fc fragment^1–8. The Fab fragment contains one light chain and one Fd fragment and is still able to combine specifically univalently with antigen. The Fc fragment is a dimer of the carboxyl terminal half of the heavy chain. Pepsin splits 7S IgG into some small peptides derived from Fc and one 5S F(ab′)₂ fragment, which contains both antigen-binding sites. Based on this information, some investigators^6,7 have postulated that pepsin splits the γ chains at the C-terminal side of the inter-heavy chain disulphide bridges, whereas papain splits at the N-terminal side of the inter-heavy chain disulphide bridges. We report here evidence that this model does not apply to all IgG subclasses. In the case of human IgG₂ subclass myeloma proteins, papain splits initially at the C-terminal side of inter-heavy chain disulphide bridges. We also show that the amino-acid sequence of the Fc fragment of human IgG₂ subclass so far determined has approximately 95% homology with that of human IgG₁ and IgG₄ subclasses reported by others^9–15.