A solution SAXS study of Borrelia burgdorferi OspA, a protein containing a single-layer beta-sheet.

The crystal structure of a soluble form of Borrelia burgdorferi outer surface protein A (OspA) complexed with the Fab fragment of a monoclonal antibody has revealed an unusual structure that has a repetitive antiparallel beta topology with a nonglobular, single layer beta-sheet connecting the globular N- and C-terminal domains. Earlier NMR studies have shown that the local structure of OspA including the single layer beta-sheet is similar to the crystal structure. Here we report a small angle X-ray scattering (SAXS) study of the global conformation of OspA in solution. The radius of gyration (Rg) and the length distribution function (P(r)) of OspA measured by SAXS in solution are nearly identical to the calculated ones from the crystal structure, respectively. The NMR and SAXS experiments complement each other to show that OspA including the central single-layer beta-sheet is a stable structure in solution, and that the OspA crystal structure represents the predominant solution conformation of the protein.     

Backbone dynamics and thermodynamics of Borrelia outer surface protein A

Nuclear spin relaxation experiments performed at 298K, 308K and 318K are used to characterize the intramolecular dynamics and thermodynamics of outer surface protein A (OspA), a key protein in the life-cycle of Borrelia burgdorferi, the causative agent of Lyme disease. It has recently been demonstrated that OspA specifically binds to the gut of the intermediate tick host (Ixodes scapularis), and that this interaction is mediated, at least in part, by residues in the C-terminal domain of OspA that are largely inaccessible to solvent in all X-ray structures of this protein. Our analysis of 15N relaxation parameters in OspA shows that the putative-binding region contains and is surrounded by flexible residues, which could facilitate accessibility to solvent and ligands. In addition, residues with similar activation energies are clustered in a manner that suggests locally collective motions. We have used molecular modeling to show that these collective motions are consistent with a hinge-bending mechanism that exposes residues implicated in binding. Characteristic temperatures describing the energy landscape of the OspA backbone are derived from the temperature dependence of the N-H bond vector order parameters, and a comparison is made between the N and C-terminal globular domains and the unusual single-layer beta-sheet connecting them. The average characteristic temperatures in the three regions indicate that, with an increase in temperature, a larger increase in accessible conformational states occurs for N-H bond vectors in the single-layer central beta-sheet than for bond vectors in the globular N and C-terminal domains. These conformational states are accessible without disruption of hydrogen bonds, providing a conformational entropic gain, upon increase in temperature, without a significant enthalpic penalty. This increase in heat capacity may help to explain the unexpected thermal stability of the unusual single-layer beta-sheet.     

Formation of the single-layer beta-sheet of Borrelia burgdorferi OspA in the absence of the C-terminal capping globular domain

Borrelia outer surface protein A (OspA) contains a unique single-layer beta-sheet that connects N and C-terminal globular domains. This single-layer beta-sheet segment (beta-strands 8-10) is highly stable in solution, although it is exposed to the solvent on both faces of the sheet and thus it does not contain a hydrophobic core. Here, we tested whether interactions with the C-terminal domain are essential for the formation of the single-layer beta-sheet. We characterized the solution structure, dynamics and stability of an OspA fragment corresponding to beta-strands 1-12 (termed OspA[27-163]), which lacks a majority of the C-terminal globular domain. Analyses of NMR chemical shifts and backbone nuclear Overhauser effect (NOE) connectivities showed that OspA[27-163] is folded except the 12th and final beta-strand. (1)H-(15)N heteronuclear NOE measurements and amide H-(2)H exchange revealed that the single-layer beta-sheet in this fragment is more flexible than the corresponding region in full-length OspA. Thermal-denaturation experiments using differential scanning calorimetry and NMR spectroscopy revealed that the N-terminal globular domain in the fragment has a conformational stability similar to that of the same region in the full-length protein, and that the single-layer beta-sheet region also has a modest thermal stability. These results demonstrate that the unique single-layer beta-sheet retains its conformation in the absence of its interactions with the C-terminal domain. This fragment is significantly smaller than the full-length OspA, and thus it is expected to facilitate studies of the folding mechanism of this unusual beta-sheet structure.     

Structural investigation of Borrelia burgdorferi OspB, a bactericidal Fab target

Certain antibody Fab fragments directed against the C terminus of outer surface protein B (OspB), a major lipoprotein of the Lyme disease spirochete, Borrelia burgdorferi, have the unusual property of being bactericidal even in the absence of complement. We report here x-ray crystal structures of a C-terminal fragment of B. burgdorferi OspB, which spans residues 152-296, alone at 2.0-A resolution, and in a complex with the bactericidal Fab H6831 at 2.6-A resolution. The H6831 epitope is topologically analogous to the LA-2 epitope of OspA and is centered around OspB Lys-253, a residue essential for H6831 recognition. A beta-sheet present in the free OspB fragment is either disordered or removed by proteolysis in the H6831-bound complex. Other conformational changes between free and H6831-bound structures are minor and appear to be related to this loss. In both crystal structures, OspB C-terminal fragments form artificial dimers connected by intermolecular beta-sheets. OspB structure, stability, and possible mechanisms of killing by H6831 and other bactericidal Fabs are discussed in light of the structural data.     

Crystal structure of a highly acidic neurotoxin from scorpion Buthus tamulus at 2.2A resolution reveals novel structural features

The crystal structure of a highly acidic neurotoxin from the scorpion Buthus tamulus has been determined at 2.2A resolution. The amino acid sequence determination shows that the polypeptide chain has 64 amino acid residues. The pI measurement gave a value of 4.3 which is one of the lowest pI values reported so far for a scorpion toxin. As observed in other alpha-toxins, it contains four disulphide bridges, Cys12-Cys63, Cys16-Cys36, Cys22-Cys46, and Cys26-Cys48. The crystal structure reveals the presence of two crystallographically independent molecules in the asymmetric unit. The conformations of two molecules are identical with an r.m.s. value of 0.3A for their C(alpha) tracings. The overall fold of the toxin is very similar to other scorpion alpha-toxins. It is a betaalphabetabeta protein. The beta-sheet involves residues Glu2-Ile6 (strand beta1), Asp32-Trp39 (strand beta3) and Val45-Val55 (strand beta4). The single alpha-helix formed is by residues Asn19-Asp28 (alpha2). The structure shows a trans peptide bond between residues 9 and 10 in the five-membered reverse turn Asp8-Cys12. This suggests that this toxin belongs to classical alpha-toxin subfamily. The surface features of the present toxin are highly characteristic, the first (A-site) has residues, Phe18, Trp38 and Trp39 that protrude outwardly presumably to interact with its receptor. There is another novel face (N-site) of this neurotoxin that contains several negatively charged residues such as, Glu2, Asp3, Asp32, Glu49 and Asp50 which are clustered in a small region of the toxin structure. On yet another face (P-site) in a triangular arrangement, with respect to the above two faces there are several positively charged residues, Arg58, Lys62 and Arg64 that also protrude outwardly for a potentially potent interaction with other molecules. This toxin with three strong features appears to be one of the most toxic molecules reported so far. In this sense, it may be a new subclass of neurotoxins with the largest number of hot spots.     

Crystal structure of low-potential cytochrome c 549 from Synechocystis sp. PCC 6803 at 1.21 Å resolution

The crystal structure of low-potential cytochrome c549, an extrinsic component of the photosystem II (PS II) from Synechocystis sp. PCC 6803, was obtained directly from single-wavelength 1.21 A resolution diffraction data. This is the first monodomain bis-histidinyl monoheme cytochrome c to be structurally characterized. The extended N-terminal region of c549 builds up a two-strand antiparallel beta-sheet in a hairpin motif, which extends through two molecules owing to crystal packing. Both peptide termini are involved in crystal contacts, which may explain their protrusion out of the globular fold. The C-terminus is preceded by a 9 A-long hydrophobic finger extending from a positively charged base and could be involved in PSII interactions, as well as a protruding negative patch built by a set of conserved acidic residues among c549 sequences.     

Multistep denaturation of Borrelia burgdorferi OspA, a protein containing a single-layer beta-sheet

Outer surface protein A (OspA) from the Lyme disease spirochete, Borrelia burgdorferi, is a dumbbell-shaped protein in which two globular domains are connected by a three-stranded beta-sheet segment that is solvent-exposed on both faces. Previous studies showed that the whole protein, including the single-layer beta-sheet, is highly rigid. To elucidate the folding mechanism and the role of the central beta-sheet in the formation of the rigid molecule, we investigated the equilibrium thermal denaturation reaction of OspA. We applied differential scanning calorimetry, heteronuclear NMR spectroscopy, and solution small-angle X-ray scattering (SAXS) to characterize the reaction in detail. All three techniques revealed that OspA denatures in two separable cooperative transitions. NMR measurements on OspA specifically 15N-labeled at Lys residues identified the locations of the two folding units and revealed that the C-terminal segment is less stable than the remaining N-terminal segment. The boundary between the two folding units is located within the central beta-sheet. The interconversion among the three folding states (fully folded, C-terminus unfolded, and fully denatured) is slow relative to chemical shift differences (<24 Hz), indicating that there are significant kinetic barriers in the denaturation reactions. SAXS measurements determined the radius of gyration of the native protein to be 25.0 +/- 0.3 A, which increases to 34.4 +/- 1.0 A in the first transition, and then to 56.1 +/- 1.6 A in the second transition. Thus, the intermediate state, in which the C-terminal folding unit is already denatured, is still compact. These results provide a basis for elucidating the folding mechanism of OspA.     

Calorimetric dissection of thermal unfolding of OspA,a predominantly beta-sheet protein containing a single-layer beta-sheet

Outer surface protein A (OspA) from Borrelia burgdorferi is a predominantly beta-sheet protein comprised of beta-strands beta1-beta21 and a short C-terminal alpha-helix. It contains two globular domains (N and C-terminal domains) and a unique single-layer beta-sheet (central beta-sheet) that connects the two domains. OspA contains an unusually large number of charged amino acid residues. To understand the mechanism of stabilization of this unique beta-sheet protein, thorough thermodynamic investigations of OspA and its truncated mutant lacking a part of the C-terminal domain were conducted using calorimetry and circular dichroism. The stability of OspA was found to be sensitive to pH and salt concentration. The heat capacity curve clearly consisted of two components, and all the thermodynamic parameters were obtained for each step. The thermodynamic parameters associated with the two transitions are consistent with a previously proposed model, in which the first transition corresponds to the unfolding of the C-terminal domain and the last two beta-strands of the central beta-sheet, and the second transition corresponds to that of the N-terminal domain and the first beta-strand of the central beta-sheet in the second peak. The ratio of calorimetric and van't Hoff enthalpies indicates that the first peak includes another thermodynamic intermediate state. Large heat capacity changes were observed for both transitions, indicative of large changes in the exposure of hydrophobic surfaces associated with the transitions. This observation demonstrates that hydrophobic parts are buried efficiently in the native structure in spite of the low content of hydrophobic residues in OspA. By decomposing the enthalpy, entropy, and Gibbs free energy into contributions from different interactions, we found that the enthalpy changes for hydrogen bonding and polar interactions are exceptionally large, indicating that OspA maintains its stability by making full use of its unique beta-sheet and high content of polar residues. These thermodynamic analyses demonstrated that it is possible to maintain protein tertiary structure by making effective use of an unusual amino acid composition.     

Domain association in immunoglobulin molecules. The packing of variable domains

We have analyzed the structure of the interface between VL and VH domains in three immunoglobulin fragments: Fab KOL, Fab NEW and Fab MCPC 603. About 1800 A2 of protein surface is buried between the domains. Approximately three quarters of this interface is formed by the packing of the VL and VH beta-sheets in the conserved "framework" and one quarter from contacts between the hypervariable regions. The beta-sheets that form the interface have edge strands that are strongly twisted (coiled) by beta-bulges. As a result, the edge strands fold back over their own beta-sheet at two diagonally opposite corners. When the VL and VH domains pack together, residues from these edge strands form the central part of the interface and give what we call a three-layer packing; i.e. there is a third layer composed of side-chains inserted between the two backbone side-chain layers that are usually in contact. This three-layer packing is different from previously described beta-sheet packings. The 12 residues that form the central part of the three observed VL-VH packings are absolutely or very strongly conserved in all immunoglobulin sequences. This strongly suggests that the structure described here is a general model for the association of VL and VH domains and that the three-layer packing plays a central role in forming the antibody combining site.     

Crystallization,crystal structure analysis and molecular model of the third domain of Japanese quail ovomucoid,a Kazal type inhibitor

The third domain of Japanese quail ovomucoid, a Kazal type inhibitor, has been crystallized and its crystal structure determined at 2.5 Å resolution using multiple isomorphous replacement techniques. The asymmetric unit contains four molecules. In the crystal the molecules are arranged in two slightly different octamers with approximate D4 symmetry. The molecules are held together mainly by interactions of the N-terminal residues, which form a novel secondary structural element, a β-channel.The molecule is globular with approximate dimensions 35 Å × 27 Å × 19 Å. The secondary structural elements are a double-stranded anti-parallel β-sheet of residues Pro22 to Gly32 and an α-helix from Asn33 to Ser44. The reactive site Lys18-Asp19 is located in an exposed loop. It is close to Asn33 at the N terminus of the helical segment. The polypeptide chain folding of ovomucoid bears some resemblance to other inhibitors in the existence of an anti-parallel double strand following the reactive site loop.     

X-ray structure of simian immunodeficiency virus integrase containing the core and C-terminal domain (residues 50-293)--an initial glance of the viral DNA binding platform

The crystal structure of simian immunodeficiency virus (SIV) integrase that contains in a single polypeptide the core and the C-terminal deoxyoligonucleotide binding domain has been determined at 3 A resolution with an R-value of 0.203 in the space group P2(1)2(1)2(1). Four integrase core domains and one C-terminal domain are found to be well defined in the asymmetric unit. The segment extending from residues 114 to 121 assumes the same position as seen in the integrase core domain of avian sarcoma virus as well as human immunodeficiency virus type-1 (HIV-1) crystallized in the absence of sodium cacodylate. The flexible loop in the active site, composed of residues 141-151, remains incompletely defined, but the location of the essential Glu152 residue is unambiguous. The residues from 210-218 that link the core and C-terminal domains can be traced as an extension from the core with a short gap at residues 214-215. The C(alpha) folding of the C-terminal domain is similar to the solution structure of this domain from HIV-1 integrase. However, the dimeric form seen in the NMR structure cannot exist as related by the non-crystallographic symmetry in the SIV integrase crystal. The two flexible loops of the C-terminal domain, residues 228-236 and residues 244-249, are much better fixed in the crystal structure than in the NMR structure with the former in the immediate vicinity of the flexible loop of the core domain. The interface between the two domains encompasses a solvent-exclusion area of 1500 A(2). Residues from both domains purportedly involved in DNA binding are narrowly distributed on the same face of the molecule. They include Asp64, Asp116, Glu152 and Lys159 from the core and Arg231, Leu234, Arg262, Arg263 and Lys264 from the C-terminal domain. A model for DNA binding is proposed to bridge the two domains by tethering the 228-236 loop of the C-terminal domain and the flexible loop of the core.     

Molecular bases of protein halotolerance

Halophilic proteins are stable and function at high salt concentration. Understanding how these molecules maintain their fold stable and avoid aggregation under harsh conditions is of great interest for biotechnological applications. This mini-review describes what is known about the molecular determinants of protein halotolerance. Comparisons between the sequences of halophilic/non-halophilic homologous protein pairs indicated that Asp and Glu are significantly more frequent, while Lys, Ile and Leu are less frequent in halophilic proteins. Homologous halophilic and non-halophilic proteins have similar overall structure, secondary structure content, and number of residues involved in the formation of H-bonds. On the other hand, on the halophilic protein surface, a decrease of nonpolar residues and an increase of charged residues are observed. Particularly, halophilic adaptation correlates with an increase of Asp and Glu, compensated by a decrease of basic residues, mainly Lys, on protein surface. A thermodynamic model, that provides a reliable explanation of the salt effect on the conformational stability of globular proteins, is presented.     

Plasminogen activator inhibitor-1 deficient mice are protected from angiotensin II-induced fibrosis

Fungal methionine synthase, Met6p, transfers a methyl group from 5-methyl-tetrahydrofolate to homocysteine to generate methionine. The enzyme is essential to fungal growth and is a potential anti-fungal drug design target. We have characterized the enzyme from the pathogen Candida albicans but were unable to crystallize it in native form. We converted Lys103, Lys104, and Glu107 all to Tyr (Met6pY), Thr (Met6pT) and Ala (Met6pA). All variants showed wild-type kinetic activity and formed useful crystals, each with unique crystal packing. In each case the mutated residues participated in beneficial crystal contacts. We have solved the three structures at 2.0–2.8 Å resolution and analyzed crystal packing, active-site residues, and similarity to other known methionine synthase structures. C. albicans Met6p has a two domain structure with each of the domains having a (βα)₈-barrel fold. The barrels are arranged face-to-face and the active site is located in a cleft between the two domains. Met6p utilizes a zinc ion for catalysis that is bound in the C-terminal domain and ligated by four conserved residues: His657, Cys659, Glu679 and Cys739.     

Refined crystal structure of beta-lactamase from Staphylococcus aureus PC1 at 2.0 A resolution

The crystal structure of a class A beta-lactamase from Staphylococcus aureus PC1 has been refined at 2.0 A resolution. The resulting crystallographic R-factor (R = sigma h parallel Fo[-]Fc parallel/sigma h[Fo], where [Fo] and [Fc] are the observed and calculated structure factor amplitudes, respectively), is 0.163 for the 17,547 reflections with I greater than or equal to 2 sigma (I) within the 8.0 A to 2.0 A resolution range. The molecule consists of two closely associated domains. One domain is formed by a five-stranded antiparallel beta-sheet with three helices packing against a face of the sheet. The second domain is formed mostly by helices that pack against the second face of the sheet. The active site is located in the interface between the two domains, and many of the residues that form it are conserved in all known sequences of class A beta-lactamases. Similar to the serine proteases, an oxyanion hole is implicated in catalysis. It is formed by two main-chain nitrogen atoms, that of the catalytic seryl residue, Ser70, and that of Gln237 on an edge beta-strand of the major beta-sheet. Ser70 is interacting with another conserved seryl residue, Ser130, located between the two ammonium groups of the functionally important lysine residues, Lys73 and Lys234. Such intricate interactions point to a possible catalytic role for this second seryl residue. Another key catalytic residue is Glu166. There are several unusual structural features associated with the active site. (1) A cis peptide bond has been identified between the catalytic Glu166 and Ile167. (2) Ala69 and Leu220 have strained phi, psi dihedral angles making close contacts that restrict the conformation of the active site beta-strand involved in the formation of the oxyanion hole. (3) A buried aspartate residue, the conserved Asp233, is located next to the active site Lys234. It is interacting with another buried aspartyl residue, Asp246. An internal solvent molecule is also involved, but the rest of its interactions with the protein indicate it is not a cation. (4) Another conserved aspartyl residue that is desolvated is Asp131, adjacent to Ser130. Its charge is stabilized by interactions with four main-chain nitrogen atoms. (5) An internal cavity underneath the active site depression is filled with six solvent molecules. This, and an adjacent cavity occupied by three solvent molecules partially separate the omega-loop associated with the active site from the rest of the protein.(ABSTRACT TRUNCATED AT 250 WORDS)     

Plasminogen activator inhibitor 1. Structure of the native serpin, comparison to its other conformers and implications for serpin inactivation

The crystal structure of a constitutively active multiple site mutant of plasminogen activator inhibitor 1 (PAI-1) was determined and refined at a resolution of 2.7 A.The present structure comprises a dimer of two crystallographically independent PAI-1 molecules that pack by association of the residues P6 to P3 of the reactive centre loop of one molecule (A) with the edge of the main beta-sheet A of the other molecule (B).Thus, the reactive centre loop is ordered for molecule A by crystal packing forces, while for molecule B it is unconstrained by crystal packing contacts and is disordered.The overall structure of active PAI-1 is similar to the structures of other active inhibitory serpins exhibiting as the major secondary structural feature a five-stranded beta-sheet A and an intact proteinase-binding loop protruding from the one end of the elongated molecule. No preinsertion of the reactive centre loop is observed in this structure.A comparison of the present structure with the previously determined crystal structures of PAI-1 in its alternative conformations reveals that, upon cleavage of an intact form of PAI-1 or formation of latent PAI-1, the well-characterised rearrangements of the serpin secondary structural elements are accompanied by dramatic and partly unexpected conformational changes of helical and loop structures proximal to beta-sheet A.The present structure explains the stabilising effects of the mutated residues, reveals the structural cause for the observed spectroscopic differences between active and latent PAI-1, and provides new insights into possible mechanisms of stabilisation by its natural binding partner, vitronectin.     

Staggered molecular packing in crystals of a collagen-like peptide with a single charged pair

The crystal structure of the triple-helical peptide, (Pro-Hyp-Gly)(4)-Glu-Lys-Gly-(Pro-Hyp-Gly)(5) has been determined to 1.75 A resolution. This peptide was designed to examine the effect of a pair of adjacent, oppositely charged residues on collagen triple-helical conformation and intermolecular interactions. The molecular conformation (a 7(5) triple helix) and hydrogen bonding schemes are similar to those previously reported for collagen triple helices and provides a second instance of water mediated N--H . . . O==C interchain hydrogen bonds for the amide group of the residue following Gly. Although stereochemically capable of forming intramolecular or intermolecular ion pairs, the lysine and glutamic acid side-chains instead display direct interactions with carbonyl groups and hydroxyproline hydroxyl groups or interactions mediated by water molecules. Solution studies on the EKG peptide indicate stabilization at neutral pH values, where both Glu and Lys are ionized, but suggest that this occurs because of the effects of ionization on the individual residues, rather than ion pair formation. The EKG structure suggests a molecular mechanism for such stabilization through indirect hydrogen bonding. The molecular packing in the crystal includes an axial stagger between molecules, reminiscent of that observed in D-periodic collagen fibrils. The presence of a Glu-Lys-Gly triplet in the middle of the sequence appears to mediate this staggered molecular packing through its indirect water-mediated interactions with backbone C==O groups and side chains.     

Three-dimensional structure of recombinant human granulocyte-macrophage colony-stimulating factor.

The crystal structure of recombinant human granulocyte-macrophage colony-stimulating factor (rhGM-CSF) has been determined at 2.8 A resolution using multiple isomorphous replacement techniques. There are two molecules in the crystallographic asymmetric unit, which are related by an approximate non-crystallographic 2-fold axis. The overall structure is highly compact and globular with a predominantly hydrophobic core. The main structural feature of rhGM-CSF is a four alpha-helix bundle, which represents approximately 42% of the structure. The helices are arranged in a left-handed antiparallel bundle with two overhand connections. Within the connections is a two-stranded antiparallel beta-sheet. The tertiary structure of rhGM-CSF has a topology similar to that of porcine growth factor and interferon-beta. Most of the proposed critical regions for receptor binding are located on a continuous surface at one end of the molecule that includes the C terminus.     

The crystal structure of the globular domain of sheep prion protein

The prion protein PrP is a naturally occurring polypeptide that becomes transformed from a normal conformation to that of an aggregated form, characteristic of pathological states in fatal transmissible spongiform conditions such as Creutzfeld-Jacob Disease and Bovine Spongiform Encephalopathy. We report the crystal structure, at 2 A resolution, of residues 123-230 of the C-terminal globular domain of the ARQ allele of sheep prion protein (PrP). The asymmetric unit contains a single molecule whose secondary structure and overall organisation correspond to those structures of PrPs from various mammalian species determined by NMR. The globular domain shows a close association of helix-1, the C-terminal portion of helix-2 and the N-terminal portion of helix-3, bounded by the intramolecular disulphide bond, 179-214. The loop 164-177, between beta2 and helix-2 is relatively well structured compared to the human PrP NMR structure. Analysis of the sheep PrP structure identifies two possible loci for the initiation of beta-sheet mediated polymerisation. One of these comprises the beta-strand, residues 129-131 that forms an intra-molecular beta-sheet with residues 161-163. This strand is involved in lattice contacts about a crystal dyad to generate a four-stranded intermolecular beta-sheet between neighbouring molecules. The second locus involves the region 188-204, which modelling suggests is able to undergo a partial alpha-->beta switch within the monomer. These loci provide sites within the PrPc monomer that could readily give rise to early intermediate species on the pathway to the formation of aggregated PrPSc containing additional intermolecular beta-structure.     

NMR structural analysis of alpha-bungarotoxin and its complex with the principal alpha-neurotoxin-binding sequence on the alpha 7 subunit of a neuronal nicotinic acetylcholine receptor.

We report a new, higher resolution NMR structure of alpha-bungarotoxin that defines the structure-determining disulfide core and beta-sheet regions. We further report the NMR structure of the stoichiometric complex formed between alpha-bungarotoxin and a recombinantly expressed 19-mer peptide ((178)IPGKRTESFYECCKEPYPD(196)) derived from the alpha7 subunit of the chick neuronal nicotinic acetylcholine receptor. A comparison of these two structures reveals binding-induced stabilization of the flexible tip of finger II in alpha-bungarotoxin. The conformational rearrangements in the toxin create an extensive binding surface involving both sides of the alpha7 19-mer hairpin-like structure. At the contact zone, Ala(7), Ser(9), and Ile(11) in finger I and Arg(36), Lys(38), Val(39), and Val(40) in finger II of alpha-bungarotoxin interface with Phe(186), Tyr(187), Glu(188), and Tyr(194) in the alpha7 19-mer underscoring the importance of receptor aromatic residues as critical neurotoxin-binding determinants. Superimposing the structure of the complex onto that of the acetylcholine-binding protein (1I9B), a soluble homologue of the extracellular domain of the alpha7 receptor, places alpha-bungarotoxin at the peripheral surface of the inter-subunit interface occluding the agonist-binding site. The disulfide-rich core of alpha-bungarotoxin is suggested to be tilted in the direction of the membrane surface with finger II extending into the proposed ligand-binding cavity.     

Kinetic stabilization of Bacillus licheniformis alpha-amylase through introduction of hydrophobic residues at the surface

It is generally assumed that in proteins hydrophobic residues are not favorable at solvent-exposed sites, and that amino acid substitutions on the surface have little effect on protein thermostability. Contrary to these assumptions, we have identified hyperthermostable variants of Bacillus licheniformis alpha-amylase (BLA) that result from the incorporation of hydrophobic residues at the surface. Under highly destabilizing conditions, a variant combining five stabilizing mutations unfolds 32 times more slowly and at a temperature 13 degrees C higher than the wild-type. Crystal structure analysis at 1.7 A resolution suggests that stabilization is achieved through (a) extension of the concept of increased hydrophobic packing, usually applied to cavities, to surface indentations, (b) introduction of favorable aromatic-aromatic interactions on the surface, (c) specific stabilization of intrinsic metal binding sites, and (d) stabilization of a beta-sheet by introducing a residue with high beta-sheet forming propensity. All mutated residues are involved in forming complex, cooperative interaction networks that extend from the interior of the protein to its surface and which may therefore constitute "weak points" where BLA unfolding is initiated. This might explain the unexpectedly large effect induced by some of the substitutions on the kinetic stability of BLA. Our study shows that substantial protein stabilization can be achieved by stabilizing surface positions that participate in underlying cooperatively formed substructures. At such positions, even the apparently thermodynamically unfavorable introduction of hydrophobic residues should be explored.