Transfection in perfused microfluidic cell culture devices: A case study

Automated microfluidic devices are a promising route towards a point-of-care autologous cell therapy. The initial steps of induced pluripotent stem cell (iPSC) derivation involve transfection and long term cell culture. Integration of these steps would help reduce the cost and footprint of micro-scale devices with applications in cell reprogramming or gene correction. Current examples of transfection integration focus on maximising efficiency rather than viable long-term culture. Here we look for whole process compatibility by integrating automated transfection with a perfused microfluidic device designed for homogeneous culture conditions. The injection process was characterised using fluorescein to establish a LabVIEW-based routine for user-defined automation. Proof-of-concept is demonstrated by chemically transfecting a GFP plasmid into mouse embryonic stem cells (mESCs). Cells transfected in the device showed an improvement in efficiency (34%, n = 3) compared with standard protocols (17.2%, n = 3). This represents a first step towards microfluidic processing systems for cell reprogramming or gene therapy.     

Real‐time monitoring of specific oxygen uptake rates of embryonic stem cells in a microfluidic cell culture device

Oxygen plays a key role in stem cell biology as a signaling molecule and as an indicator of cell energy metabolism. Quantification of cellular oxygen kinetics, i.e. the determination of specific oxygen uptake rates (sOURs), is routinely used to understand metabolic shifts. However current methods to determine sOUR in adherent cell cultures rely on cell sampling, which impacts on cellular phenotype. We present real‐time monitoring of cell growth from phase contrast microscopy images, and of respiration using optical sensors for dissolved oxygen. Time‐course data for bulk and peri‐cellular oxygen concentrations obtained for Chinese hamster ovary (CHO) and mouse embryonic stem cell (mESCs) cultures successfully demonstrated this non‐invasive and label‐free approach. Additionally, we confirmed non‐invasive detection of cellular responses to rapidly changing culture conditions by exposing the cells to mitochondrial inhibiting and uncoupling agents. For the CHO and mESCs, sOUR values between 8 and 60 amol cell^?1 s^?1, and 5 and 35 amol cell^?1 s^?1 were obtained, respectively. These values compare favorably with literature data. The capability to monitor oxygen tensions, cell growth, and sOUR, of adherent stem cell cultures, non‐invasively and in real time, will be of significant benefit for future studies in stem cell biology and stem cell‐based therapies.     

基于微流控的真菌单细胞捕获和培养

【背景】真菌单细胞培养在研究细胞异质性及细胞生长特性等方面十分重要,因此需要建立简单便捷的方法对真菌单细胞进行培养与观察。【目的】基于微流控建立一种真菌单细胞的捕获及培养方法,同时直观地对单细胞进行定位和实时观察。【方法】利用L-edit设计芯片图案并利用等离子键合的方法制备微流控芯片;通过注射泵将红酵母菌溶液及里氏木霉孢子溶液进样以实现单细胞捕获;采用台盼蓝染色法测定酵母细胞的存活率;利用显微镜对酵母单细胞及木霉孢子的萌发、生长、繁殖过程进行观察。【结果】所制备的芯片形状完好,可实现酵母或孢子的单细胞捕获;酵母的捕获率为25.00%±1.38%;分别于0、2、4、6h对酵母进行观察,可看到酵母出芽过程;培养至48h,芯片上酵母细胞的存活率与游离培养条件下的存活率无显著性差异;分别于0、3、6、9 h对单个孢子进行观察,可以看到孢子萌发以及菌丝生长情况,且直至120h菌丝仍在生长。【结论】设计并制备了一种用于真菌单细胞捕获及定位培养的微流控芯片,这是此种芯片在真菌单细胞培养中的首次应用。细胞可在此微流控芯片上正常生长至少2 d,并可实现5 d及更长时间的培养,此方法可对真菌单细胞进行直观、定位的实时观察,有望用于多种微生物单细胞的生理、遗传性状研究,以及原生质体融合育种研究。     

Plant cell culture initiation

The use of cultured plant cells in either organized or unorganized form has increased vey considerably in the last 10–15 yr. Many new technologies have been developed and applications in both fundamental and applied research have led to the development of some powerful tools for improving our knowledge of botanical systems and for gaining external influence over some of the key processes involved in inter-and intracellular organization. This is particularly the case when cell culture techniques are combined with those for the genetic modification of plant cells. Being able to regenerate whole plants that have gained or lost the expression of one or more specific genes has revolutionized the way in which we approach scientific questions and has opened up many additional possibilities for the molecular dissection of plants. The success or fall of all plant cell culture technologies lies with culture initiation. The choice of plant material, its physiologival state and cultivation history, the media used, and their means of preparation are just some of the factors that can greatly influence whether the desired end result will be achieved. In this article are described some of the practical aspects involved in successful plant cell culture initiation and the choices that have to be made. Attention is given to some of the pitfalls that can occur and how to avoid them. A good start is half the work     

Sugarcane tissue and protoplast culture

Experiments are described which improve the protocols for initiating in vitro cultures of sugarcane and allowing efficient regeneration of plants even after 30 months of callus proliferation. Procedures adopted included use of leaf base explants, CS medium with 3 mg/l 2, 4-D and 0.25 mg/l kinetin for callus initiation and growth, MS medium with 0.5 mg/l IAA and 1 mg/l BAP for shoots, MS medium with 5 mg/l NAA and 7% (wt/vol) sucrose for rooting of shoots. Casein hydrolysate (N-Z amine) significantly shortened the lag period in the growth of sugarcane suspension cultures, but did not increase the rate of growth following the lag phase. Protoplasts isolated from two types of cultures could be grown to re-establish cell cultures but no plants have yet been regenerated derived from isolated protoplasts.     

Separation of apoptotic cells using a microfluidic device

A highly sensitive microfluidic device has been developed to separate apoptotic cells. Apoptotic Jurkat cells were selectively labeled with magnetic beads (0.8 μm diam) using the C2A protein which recognizes phosphatidylserine. The cell mixture was flowed through a microfluidic channel and apoptotic cells were separated by a 0.3 T permanent magnet. Separations using our device showed 96% agreement with those of a commercial flow cytometer, indicating our device can be used to sort apoptotic cells in a miniaturized system.     

二倍体马铃薯叶肉细胞原生质体培养的研究

以马铃薯抗青枯病二倍体材料ED13和CE171、炸片颜色好的二倍体材料HS66以及优良性状双单体材料DH401和DH405为供体材料,对马铃薯叶肉原生质体培养进行研究。叶片悬浮黑暗预处理和试管苗黑暗预处理两种预处理方式对原生质体活力无显著影响。以0.5 mol/L甘露醇为渗透调节剂,25℃酶解12 h条件下,适宜CE171和DH401纤维酶浓度略高于ED13、HS66和DH405,分别为0.3%和0.4%。ED13和DH401原生质体在VKM液体培养基中培养3～4周,经愈伤组织生长培养基培养2周,转至芽诱导培养基培养,2～3个月后形成具根茎叶的完整植株。HS66和CE171原生质体培养6～8周也能形3～4 mm愈伤组织,但没有分化出芽;DH405的原生质体不分裂。     

Single-cell cloning and expansion of human induced pluripotent stem cells by a microfluidic culture device

The microenvironment of cells, which includes basement proteins, shear stress, and extracellular stimuli, should be taken into consideration when examining physiological cell behavior. Although microfluidic devices allow cellular responses to be analyzed with ease at the single-cell level, few have been designed to recover cells. We herein demonstrated that a newly developed microfluidic device helped to improve culture conditions and establish a clonality-validated human pluripotent stem cell line after tracing its growth at the single-cell level. The device will be a helpful tool for capturing various cell types in the human body that have not yet been established in vitro.     

Lung carcinoma spheroids embedded in a microfluidic platform

Cytotechnology - Three-dimensional (3D) spheroid cell cultures are excellent models used in cancer biology research and drug screening. The objective of this study was to develop a lung carcinoma...     

Microfluidic three-dimensional cell culture of stem cells for high-throughput analysis

Although the recent advances in stem cell engineering have gained a great deal of attention due to their high potential in clinical research, the applicability of stem cells for preclinical screening in the drug discovery process is still challenging due to difficulties in controlling the stem cell microenvironment and the limited availability of high-throughput systems. Recently, researchers have been actively developing and evaluating three-dimensional (3D) cell culture-based platforms using microfluidic technologies, such as organ-on-a-chip and organoid-on-a-chip platforms, and they have achieved promising breakthroughs in stem cell engineering. In this review, we start with a comprehensive discussion on the importance of microfluidic 3D cell culture techniques in stem cell research and their technical strategies in the field of drug discovery. In a subsequent section, we discuss microfluidic 3D cell culture techniques for high-throughput analysis for use in stem cell research. In addition, some potential and practical applications of organ-on-a-chip or organoid-on-a-chip platforms using stem cells as drug screening and disease models are highlighted.     

DNA hybridization detection in a microfluidic channel using two fluorescently labelled nucleic acid probes

A conceptually new technique for fast DNA detection has been developed. Here, we report a fast and sensitive online fluorescence resonance energy transfer (FRET) detection technique for label-free target DNA. This method is based on changes in the FRET signal resulting from the sequence-specific hybridization between two fluorescently labelled nucleic acid probes and target DNA in a PDMS microfluidic channel. Confocal laser-induced microscopy has been used for the detection of fluorescence signal changes. In the present study, DNA hybridizations could be detected without PCR amplification because the sensitivity of confocal laser-induced fluorescence detection is very high. Two probe DNA oligomers (5'-CTGAT TAGAG AGAGAA-TAMRA-3' and 5'-TET-ATGTC TGAGC TGCAGG-3') and target DNA (3'-GACTA ATCTC TCTCT TACAG GCACT ACAGA CTCGA CGTCC-5') were introduced into the channel by a microsyringe pump, and they were efficiently mixed by passing through the alligator teeth-shaped PDMS microfluidic channel. Here, the nucleic acid probes were terminally labelled with the fluorescent dyes, tetrafluororescein (TET) and tetramethyl-6-carboxyrhodamine (TAMRA), respectively. According to our confocal fluorescence measurements, the limit of detection of the target DNA is estimated to be 1.0 x 10(-6) to 1.0 x 10(-7)M. Our result demonstrates that this analytical technique is a promising diagnostic tool that can be applied to the real-time analysis of DNA targets in the solution phase.     

Soft material-based microculture system having air permeable cover sheet for the protoplast culture of Nicotiana tabacum

In plant cell culture, the delivery of nutrition and gas (mainly oxygen) to the cells is the most important factor for viability. In this paper, we propose a polydimethylsiloxane (PDMS)-based microculture system that is designed to have good aeration. PDMS is known to have excellent air permeability, and through the experimental method, we investigated the relation between the degree of air delivery and the thickness of the PDMS sheet covering the culture chamber. We determined the proper thickness of the cover sheet, and cultured protoplasts of Nicotiana tabacum in a culture chamber covered with a PDMS sheet having thickness of 400 μm. The cells were successfully divided, and lived well inside the culture chamber for 10 days. In addition, protoplasts were cultured inside the culture chambers covered with the cover glass and the PDMS sheet, respectively, and the microcolonies were formed well inside the PDMS covered chamber after 10 days.     

Continuous perfusion microfluidic cell culture array for high-throughput cell-based assays

We present for the first time a microfluidic cell culture array for long-term cellular monitoring. The 10 x 10 array could potentially assay 100 different cell-based experiments in parallel. The device was designed to integrate the processes used in typical cell culture experiments on a single self-contained microfluidic system. Major functions include repeated cell growth/passage cycles, reagent introduction, and real-time optical analysis. The single unit of the array consists of a circular microfluidic chamber, multiple narrow perfusion channels surrounding the main chamber, and four ports for fluidic access. Human carcinoma (HeLa) cells were cultured inside the device with continuous perfusion of medium at 37 degrees C. The observed doubling time was 1.4 +/- 0.1 days with a peak cell density of approximately 2.5*10(5) cells/cm(2). Cell assay was demonstrated by monitoring the fluorescence localization of calcein AM from 1 min to 10 days after reagent introduction. Confluent cell cultures were passaged within the microfluidic chambers using trypsin and successfully regrown, suggesting a stable culture environment suitable for continuous operation. The cell culture array could offer a platform for a wide range of assays with applications in drug screening, bioinformatics, and quantitative cell biology.     

Improved Taxol production by combination of inducing factors in suspension cell culture of Taxus baccata

To date enormous attempts have been devoted to improve Taxol production exploiting various methodologies from bioprocess engineering to biotechnological and synthetic approaches. We have developed a 2-stage suspension cell culture of Taxus baccata L. using modified B5 medium in order to improve cell growth as well as productivity. After callus induction and cell line selection, B5 medium was supplemented with vanadyl sulfate (0.1 mg/l), silver nitrate (0.3 mg/l) and cobalt chloride (0.25 mg/l) at the first day of stage I culture to maximize cell growth. This medium was further supplemented with sucrose (1%) and ammonium citrate (50 mg/l) on day 10 and sucrose (1%) and phenylalanine (0.1 mM) on day 20 (i.e., biomass growth medium). At stage II (day 25), two different concentrations of several elicitors such as methyl jasmonate (10 or 20 mg/l), salicylic acid (50 or 100 mg/l) and fungal elicitor (25 or 50 mg/l) were added to the biomass growth medium with the aim of improving cellular productivity. For morphological analysis, microscopic inspection was carried out during cultivation. Cell-associated and extracellular amount of Taxol were detected and measured using HPLC methodology. At stage I, overall Taxol amount of biomass growth medium was 13.75 mg/l (i.e., 5.6-fold higher than that of untreated B5 control). At stage II, treated cells with methyl jasmonate (10 mg/l), salicylic acid (100 mg/l) and fungal elicitor (25 mg/l) produced the highest amount of Taxol (39.5 mg/l), which is 16-fold higher than that of untreated B5 control (2.45 mg/l). Microscopic analyses of Taxus cells in suspension cultures showed various positional auto-fluorescence showing direct correlation with Taxol production. Our studies revealed that intervallic supplementation of B5 medium with combination of biomass growth factors at stage I and mixture of elicitors at stage II could significantly increase Taxol production. Thus, we suggest that the exploitation of this methodology may improve the production of Taxol since demands for Taxol pharmaceuticals are increasingly growing and resource paucities have limited its direct harvesting from Taxus trees.     

Low density cell culture of locust neurons in closed-channel microfluidic devices

Microfluidic channel systems were fabricated out of polydimethylsiloxane (PDMS) and used as culture vessels for primary culture of neurons from locust thoracic ganglia. In a biocompatibility study it was shown that cell adhesion and neuronal cell growth of locust neurons on uncoated PDMS was restricted. Coating with concanavalin A improved cell adhesion. In closed-channel microfluidic devices neurons were grown in static-bath culture conditions for more than 15 days. Cell densities of up to 20 cells/channel were not exceeded in low-density cultures but we also found optimal cell growth of single neurons inside individual channels. The first successful cultivation of insect neurons in closed-channel microfluidic devices provides a prerequisite for the development of low density neuronal networks on multi electrode arrays combined with microfluidic devices.     

A tissue culture assay for direct detection of sodium channel blocking toxins in bacterial culture supernates

A quantitative assay for sodium channel blocking toxins such as tetrodotoxin and saxitoxin has been developed for use with a microtitre plate reader. Mouse neuroblastoma cells, which die rapidly in the presence of ouabain and veratridine, were protected by tetrodotoxin; surviving cells were detected by their uptake of the vital dye Neutral red which was quantified with a microtitre plate reader at 540 nm. A sigmoidal dose response curve was obtained and tetrodotoxin concentrations were readily measured over the range 10 nM to 500 nM (3.2-160 ng/ml). With this method, sodium channel blocking toxins were detected directly, without processing or concentration, in culture supernates of several marine bacteria, including Shewanella alga, Alteromonas tetraodonis, Listonella (Vibrio) pelagia, V. alginolyticus, V. anguillarum and V. tubiashi. Culture supernates of Shewanella alga contained up to 510 ng/ml of sodium channel blocking toxin (using tetrodotoxin as a standard).     

Expression of a human anti-rabies virus monoclonal antibody in tobacco cell culture

A Nicotiana tabacum cv. Xanthi cell culture was initiated from a transgenic plant expressing a human anti-rabies virus monoclonal antibody. Within 3 months, plant cell suspension cultures were established and recombinant protein expression was examined. The antibody was stably produced during culture growth. ELISA, protein G purification, Western blotting, and neutralization assay confirmed that the antibody was fully processed, with association of light and heavy-chains, and that it was able to bind and neutralize rabies virus. Quantification of antibody production in plant cell suspension culture revealed 30 microg/g of cell dry weight for the highest-producing culture (0.5 mg/L), 3 times higher than from the original transgenic plant. The same production level was observed 3 months after cell culture initiation. Plant cell suspension cultures were successfully grown in a new disposable plastic bioreactor, with a growth rate and production level similar to that of cultures in Erlenmeyer flasks.     

Benomyl: A broad spectrum fungicide for use in plant cell and protoplast culture

The systemic fungicide methyl-1-(butylcarbamoyl)-2-benzimidazole carbamate (benomyl), is a broad spectrum fungicide. Benomyl at concentrations up to 50 mg/l does not inhibit the growth of suspension cultures ofNicotiana tabacum, Datura innoxia, Daucus carota, Glycine canescens, andSolanum tuberosum nor growth ofN. tabacum orN. plumbaginifolia protoplasts if benomyl is dissolved by autoclaving or boiling. Addition of benomyl dissolved in dimethyl sulfoxide results in a visible toxicity. Benomyl, at 6.25–50 mg/l preventsPenicillium spp. growth in both protoplast and cell cultures and can be used to remove fungal contaminates after one to three transfers without visibly retarding plant cell growth. Due to the broad spectrum of fungicidal activity, and nontoxicity at high concentrations when dissolved by boiling or autoclaving, benomyl can be used effectively to control or prevent fungal contamination in plant cell and protoplast cultures.     

A pumpless perfusion cell culture cap with two parallel channel layers keeping the flow rate constant

This article presents a novel pumpless perfusion cell culture cap, the gravity‐driven flow rate of which is kept constant by the height difference of two parallel channel layers. Previous pumpless perfusion cell culture systems create a gravity‐driven flow by means of the hydraulic head difference (Δh) between the source reservoir and the drain reservoir. As more media passes from the source reservoir to the drain reservoir, the source media level decreases and the drain media level increases. Thus, previous works based on a gravity‐driven flow were unable to supply a constant flow rate for the perfusion cell culture. However, the proposed perfusion cell culture cap can supply a constant flow rate, because the media level remains unchanged as the media moves laterally through each channel having same media level. In experiments, using the different fluidic resistances, the perfusion cap generated constant flow rates of 871 ± 27 μL h^?1 and 446 ± 11 μL h^?1. The 871 and 446 μL h^?1 flow rates replace the whole 20 mL medium in the petridish with a fresh medium for days 1 and 2, respectively. In the perfusion cell (A549 cell line) culture with the 871 μL h^?1 flow rate, the proposed cap can maintain a lactate concentration of about 2200 nmol mL^?1 and an ammonia concentration of about 3200 nmol mL^?1. Moreover, although the static cell culture maintains cell viability for 5 days, the perfusion cell culture with the 871 μL h^?1 flow rate can maintain cell viability for 9 days. © 2012 American Institute of Chemical Engineers Biotechnol. Prog., 2012     

Regeneration of the barley zygote in ovule culture

An ovule culture technique has been established for barley that allows the regeneration of plants from zygotes. An average of 1.3 plantlets per ovule could be regenerated from more than 60% of the cultured ovules and about 75% of the regenerated plantlets developed into normal, fertile plants. The same regeneration frequencies were obtained in intact ovules and in ovules where the two integuments had been removed from the micropylar region. Unfertilized ovules and ovules where the fertilized eggs had been destroyed by a microinjection needle did not give rise to embryo-like structures. Plants could be regenerated from the zygote at the same frequency at developmental stages from immediately after fertilization until the formation of bicellular embryos. This tissue culture system appeared to be largely independent of genotype since similar regeneration frequencies were obtained in two different barley cultivars, Igri and Alexis, that in anther and microspore culture behave differently. The same technique has also been applied successfully in the wheat cultivar Walter.