Chimeric polioviruses that include sequences derived from two independent antigenic sites of foot-and-mouth disease virus (FMDV) induce neutralizing antibodies against FMDV in guinea pigs.

Five poliovirus recombinants containing sequences corresponding to foot-and-mouth disease virus (FMDV) antigenic sites were constructed. Viable virus was recovered from four of these plasmids, in which the VP1 beta B-beta C loop (antigenic site 1) of poliovirus type 1 Sabin had been replaced with sequences derived from the VP1 beta G-beta H loop (antigenic site 1) of FMDV O1 Kaufbeuren (O1K), chimera O1.1 (residues 141 to 154), chimera O1.2 (residues 147 to 156), and chimera O1.3 (residues 140 to 160) or from the beta B-beta C loop of VP1 (antigenic site 3) in chimera O3.1 (residues 40 to 49). One chimera (O1.3) was neutralized by FMDV-specific polyclonal serum and monoclonal antibodies directed against antigenic site 1 of FMDV. Chimeras O1.3 and O3.1 induced site-specific FMDV-neutralizing antibodies in guinea pigs. Chimera O1.3 was capable of inducing a protective response against FMDV challenge in some guinea pigs.     

The Solution Conformational Features of Two Highly Homologous Antigenic Peptides of Foot-and-mouth Disease Virus Serotype A,Variants A and USA,Correlate with their Serological Properties

The solution structure of a peptide corresponding to the VP1 region 141–160 of foot-and-mouth disease virus (FMDV) serotype A variant USA has been studied by NMR and computer calculations and compared with the results from a study on a highly homologous peptide deriving from serotype A, variant A. The two peptides differ in their serological behaviour and contain the immunodominant epitope of the virus which partly overlaps with its receptor binding region. Distance constraints, derived both from 2D and 3D homonuclear NMR and 2D-heteronuclear NMR experiments, were combined with DG calculations to yield 50 structures. After refinement through EM and restrained molecular dynamics simulations the selected structures shared several general features. In particular the 151–158 region was a helix in all cases while a large loop similar to that found in peptide A but comprising less residues and stabilized by an H-bond between the side chains of D147 and S150 was found in the majority of structures. A further loop, common to all structures, was identified around the RGD sequence (145–147). This was different from that found in the corresponding region of peptide A as were the conformations of the individual residues within the RGDX sequence. The different structural features shown by the two peptides were rationalized in terms of the S148 (peptide A) to F148 (peptide USA) mutation. The second mutation, that at position 153 (L in A, P in USA) did not appear to affect the structure of the peptide significantly although the different dimensions of the loop in the central region and the type of H-bond stabilizing it could be potentially ascribed to this second mutation. All criteria used pointed to different structural features for the two peptides consistent with their serological behaviour.     

Specificity of the VP1 GH loop of Foot-and-Mouth Disease virus for alphav integrins

Foot-and-mouth disease virus (FMDV) can use a number of integrins as receptors to initiate infection. Attachment to the integrin is mediated by a highly conserved arginine-glycine-aspartic acid (RGD) tripeptide located on the GH loop of VP1. Other residues of this loop are also conserved and may contribute to integrin binding. In this study we have used a 17-mer peptide, whose sequence corresponds to the GH loop of VP1 of type O FMDV, as a competitor of integrin-mediated virus binding and infection. Alanine substitution through this peptide identified the leucines at the first and fourth positions following RGD (RGD+1 and RGD+4 sites) as key for inhibition of virus binding and infection mediated by alphavbeta6 or alphavbeta8 but not for inhibition of virus binding to alphavbeta3. We also show that FMDV peptides containing either methionine or arginine at the RGD+1 site, which reflects the natural sequence variation seen across the FMDV serotypes, are effective inhibitors for alphavbeta6. In contrast, although RGDM-containing peptides were effective for alphavbeta8, RGDR-containing peptides were not. These observations were confirmed by showing that a virus containing an RGDR motif uses alphavbeta8 less efficiently than alphavbeta6 as a receptor for infection. Finally, evidence is presented that shows alphavbeta3 to be a poor receptor for infection by type O FMDV. Taken together, our data suggest that the integrin binding loop of FMDV has most likely evolved for binding to alphavbeta6 with a higher affinity than to alphavbeta3 and alphavbeta8.     

Arginine-glycine-aspartic acid-specific binding by foot-and-mouth disease viruses to the purified integrin alpha(v)beta3 in vitro.

The integrin alpha(v)beta3 has been shown to act as the receptor for internalization of foot-and-mouth disease virus (FMDV) (A12), with attachment being through a highly conserved RGD motif located on the G-H loop of viral capsid protein VP1. In addition, however, we have recently shown that efficient infection of culture-grown cells by FMDV (O1BFS) requires binding to cell surface heparan sulfate. In this study, we have used a solid-phase receptor binding assay to characterize the binding by FMDV to purified alpha(v)beta3 in the absence of heparan sulfate and other cell surface components. In this assay, FMDV (O1BFS) successfully replicated authentic ligand binding by cellular alpha(v)beta3 in terms of its high affinity, dependence on divalent cations, and activation by manganese ions. Virus binding to this preparation of alpha(v)beta3 was exquisitely sensitive to competition by short RGD-containing peptides (50% inhibition at < 10(-8) M peptide), and this inhibition was highly sequence specific, with the equivalent RGE peptide being at least 10(4) fold less effective as a competitor. Representative viruses of the other six serotypes of FMDV bound to alpha(v)beta3 in a similar RGD-specific manner, although significant differences in sensitivity to RGD peptides suggest that the affinity of the different FMDV serotypes for alpha(v)beta3 is influenced, in part, by the variable amino acid residues in the VP1 G-H loop on either side of the RGD.     

Modelling of poliovirus. HIV-1 antigen chimaeras.

We have used laboratory-based molecular modelling to identify structural features of antigen chimaeras of poliovirus expressing epitopes from human immunodeficiency virus (HIV-1) that may affect virus viability. Chimaeras were constructed by replacement of antigenic site 1 of VP1 by sequences corresponding to epitopes from HIV-1. Loop volume, estimated by approximating the loop to an ellipsoid was significantly (P less than 0.001) lower in viable (2062.1 A3 +/- 400.2) than in non-viable (3617 A3 +/- 650.7) constructs. Our results suggest that viable virus will only be formed when antigen chimeras modified at antigenic site of VP1 have a loop occupying a similar volume in space to that occupied by the antigenic site 1 loop. In addition, the modified loop must fit with the peptide bond angles and distances at the top of the beta-barrel of VP1.     

Development of a vaccine marker technology: display of B cell epitopes on the surface of recombinant polyomavirus-like pentamers and capsoids induces peptide-specific antibodies in piglets after vaccination

Highly immunogenic capsomers (pentamers) and virus-like particles (VLPs) were generated through insertion of foreign B cell epitopes into the surface-exposed loops of the VP1 protein of murine polyomavirus and via heterologous expression of the recombinant fusion proteins in E. coli. Usually, complex proteins like the keyhole limpet hemocyanin (KLH) act as standard carrier devices for the display of such immunogenic peptides after chemical linkage. Here, a comparative analysis revealed that antibody responses raised against the carrier entities, KLH or VP1 pentamers, did not significantly differ up to 18 weeks, demonstrating the highly immunogenic nature of VP1-based particulate structures. The carrier-specific antibody response was reproducibly detected in the meat juice after processing. More importantly, chimeric VP1 pentamers and VLPs carrying peptides of 12 and 14 amino acids in length, inserted into the BC2 loop, induced a strong and long-lasting humoral immune response against VP1 and the inserted foreign epitope. Remarkably, the epitope-specific antibody response was only moderately decreased when VP1 pentamers were used instead of VLPs. In conclusion, we identified polyomavirus VP1-based structures displaying surface-exposed immunodominant B cell epitopes as being an efficient carrier system for the induction of potent peptide-specific antibodies. The application of this approach in vaccine marker technology in livestock holding and the meat production chain is discussed.     

Structures of the major capsid proteins of the human Karolinska Institutet and Washington University polyomaviruses

The Karolinska Institutet and Washington University polyomaviruses (KIPyV and WUPyV, respectively) are recently discovered human viruses that infect the respiratory tract. Although they have not yet been linked to disease, they are prevalent in populations worldwide, with initial infection occurring in early childhood. Polyomavirus capsids consist of 72 pentamers of the major capsid protein viral protein 1 (VP1), which determines antigenicity and receptor specificity. The WUPyV and KIPyV VP1 proteins are distant in evolution from VP1 proteins of known structure such as simian virus 40 or murine polyomavirus. We present here the crystal structures of unassembled recombinant WUPyV and KIPyV VP1 pentamers at resolutions of 2.9 and 2.55 Å, respectively. The WUPyV and KIPyV VP1 core structures fold into the same β-sandwich that is a hallmark of all polyomavirus VP1 proteins crystallized to date. However, differences in sequence translate into profoundly different surface loop structures in KIPyV and WUPyV VP1 proteins. Such loop structures have not been observed for other polyomaviruses, and they provide initial clues about the possible interactions of these viruses with cell surface receptors.     

Surface loop dynamics in adeno-associated virus capsid assembly

The HI loop is a prominent domain on the adeno-associated virus (AAV) capsid surface that extends from each viral protein (VP) subunit overlapping the neighboring fivefold VP. Despite the highly conserved nature of the residues at the fivefold pore, the HI loops surrounding this critical region vary significantly in amino acid sequence between the AAV serotypes. In order to understand the role of this unique capsid domain, we ablated side chain interactions between the HI loop and the underlying EF loop in the neighboring VP subunit by generating a collection of deletion, insertion, and substitution mutants. A mutant lacking the HI loop was unable to assemble particles, while a substitution mutant (10 glycine residues) assembled particles but was unable to package viral genomes. Substitution mutants carrying corresponding regions from AAV1, AAV4, AAV5, and AAV8 yielded (i) particles with titers and infectivity identical to those of AAV2 (AAV2 HI1 and HI8), (ii) particles with a decreased virus titer (1 log) but normal infectivity (HI4), and (iii) particles that synthesized VPs but were unable to assemble into intact capsids (HI5). AAV5 HI is shorter than all other HI loops by one amino acid. Replacing the missing residue (threonine) in AAV2 HI5 resulted in a moderate particle assembly rescue. In addition, we replaced the HI loop with peptides varying in length and amino acid sequence. This region tolerated seven-amino-acid peptide substitutions unless they spanned a conserved phenylalanine at amino acid position 661. Mutation of this highly conserved phenylalanine to a glycine resulted in a modest decrease in virus titer but a substantial decrease (1 log order) in infectivity. Subsequently, confocal studies revealed that AAV2 F661G is incapable of efficiently completing a key step in the infectious pathway nuclear entry, hinting at a possible perturbation of VP1 phospholipase activity. Molecular modeling studies with the F661G mutant suggest that disruption of interactions between F661 and an underlying P373 residue in the EF loop of the neighboring subunit might adversely affect incorporation of the VP1 subunit at the fivefold axis. Western blot analysis confirmed inefficient incorporation of VP1, as well as a proteolytically processed VP1 subunit that could account for the markedly reduced infectivity. In summary, our studies show that the HI loop, while flexible in amino acid sequence, is critical for AAV capsid assembly, proper VP1 subunit incorporation, and viral genome packaging, all of which implies a potential role for this unique surface domain in viral infectivity.     

Immunogenicity of Two FMDV Nonameric Peptides Encapsulated in Liposomes in Mice and the Protective Efficacy in Guinea Pigs

It has been predicted that nonameric peptides I (VP1_26–34, RRQHTDVSF), II (VP1_157–165, RTLPTSFNY) and III (VP1_45–53, KEQVNVLDL) from the VP1 capsid protein of the foot-and-mouth disease virus (FMDV) are T cell epitopes. To investigate whether these peptides have immunological activity, BALB/c mice were immunized with peptide I, II or III conjugated with immunostimulating complexes (ISCOMs). A cytotoxic T lymphocyte assay was used to evaluate the cytotoxic activity induced by peptides along with by measuring peptide-specific T-cell proliferation and CD8⁺ T lymphocyte numbers in whole blood and interferon (IFN)-γ production in peripheral blood mononuclear cells induced by peptides. To further identify the protective efficacy of peptides, an FMDV challenge assay was done in guinea pigs. Peptides I and II stimulated significant increases in T-cell proliferation, CD8⁺ T lymphocytes, and IFN-γ secretion and cytotoxic activity compared to controls. The FMDV challenge assay indicated peptides I and II can protect over 60% of animals from virus attack. The results demonstrate that peptides I and II encapsulated in liposomes should be CTL epitopes of FMDV and can protect animals from virus attack to some extent.     

Chemical cleavage of polyomavirus major structural protein VP1: identification of cleavage products and evidence that the receptor moiety resides in the carboxy-terminal region

As a first step toward identifying the various functional regions of the polyomavirus major capsid protein VP1, we used recently developed methods for the chemical cleavage of proteins and the available polyomavirus sequence data to devise a scheme to produce large, identifiable peptides and generate a cleavage map of VP1. Formic acid (75%) was found to cleave VP1 at only two sites, producing three peptides of apparent molecular weights of 29,000, 16,000, and 2,000. The order of peptides in intact VP1 was determined by recleavage of partial products and was found to be 29,000, 16,000, and 2,000. Two-dimensional peptide mapping studies of 125I-labeled VP1 formic acid peptides established that the limit products of formic acid digestion contained mutually exclusive sets of labeled peptides when either trypsin or chymotrypsin was used and that together the formic acid peptides contained all of the 125I-labeled tryptic and chymotryptic peptides found in VP1. Iodosobenzoic acid (IBA) digestion produced four peptides separable by sodium dodecyl sulfate-polyacrylamide gel electrophoresis, with apparent molecular weights of 12,000, 8,000, 7,000, and 5,000. The approximate positions of the IBA peptides in the VP1 sequence were determined by cleavage of formic acid fragments with IBA. The number of peptides produced, their respective sizes, and their order in the intact VP1 molecule agree with predictions made from available sequence data, both for formic acid cleavage and IBA cleavage. In addition, the numbers of 125I-labeled tryptic peptides produced from digestion of VP1 formic acid peptides also agree with predictions made from the sequence information. These data establish with reasonable certainty that the peptides produced by formic acid cleavage and IBA cleavage of VP1 are indeed those predicted. Antibodies raised against spontaneously produced, previously undefined polypeptides resulting from degradation of VP1 reacted exclusively with the formic acid peptides derived from the C-terminal portion of VP1. These antibodies inhibited hemagglutination and neutralized polyomavirus virions. We interpret this to mean that at least some of the antigenic determinants of the receptor moiety reside in this portion of the VP1 sequence.     

Foot-and-mouth disease virus forms a highly stable, EDTA-resistant complex with its principal receptor, integrin alphavbeta6: implications for infectiousness

The initial stage of foot-and-mouth disease virus (FMDV) infection is virus binding to cell surface integrins via the RGD motif in the GH loop of the VP1 capsid protein. As for all ligand/integrin interactions, the initial contact between FMDV and its integrin receptors is cation dependent and hence inhibited by EDTA. We have investigated this binding process with RGD-containing peptides derived from the VP1 capsid protein of FMDV and discovered that, upon binding, some of these peptides form highly stable, EDTA-resistant associations with integrin αvβ6. Peptides containing specific substitutions show that this stable binding is dependent on a helical structure immediately C terminal to the RGD and, specifically, two leucine residues at positions RGD +1 and RGD +4. These observations have a biological consequence, as we show further that stable, EDTA-resistant binding to αvβ6 is a property also exhibited by FMDV particles. Thus, the integrin-binding loop of FMDV appears to have evolved to form very stable complexes with the principal receptor of FMDV, integrin αvβ6. An ability to induce such stable complexes with its cellular receptor is likely to contribute significantly to the high infectiousness of FMDV.     

Characterization of the VP1 loop mutations widespread among JC polyomavirus isolates associated with progressive multifocal leukoencephalopathy

Recently, we found that JC polyomavirus (JCPyV) associated with progressive multifocal leukoencephalopathy (PML) frequently undergoes amino acid substitutions (designated VP1 loop mutations) in the outer loops of the major capsid protein, VP1. To further characterize the mutations, we analyzed the VP1 region of the JCPyV genome in brain-tissue or cerebrospinal fluid samples from 20 PML patients. VP1 loop mutations occurred far more frequently than silent mutations. Polymorphic residues were essentially restricted to three positions (55, 60, and 66) within the BC loop, one (123) within the DE loop, and three (265, 267, and 269) within the HI loop. The mutations at most polymorphic residues showed a trend toward a change to specific amino acids. Finally, we presented evidence that the VP1 loop mutations were associated with the progression of PML. These findings should form the basis for elucidating the biological significance of the VP1 loop mutations.     

Identification of a Conserved B-Cell Epitope on Duck Hepatitis A Type 1 Virus VP1 Protein

BackgroundThe VP1 protein of duck hepatitis A virus (DHAV) is a major structural protein that induces neutralizing antibodies in ducks; however, B-cell epitopes on the VP1 protein of duck hepatitis A genotype 1 virus (DHAV-1) have not been characterized.

Methods and Results

To characterize B-cell epitopes on VP1, we used the monoclonal antibody (mAb) 2D10 against Escherichia coli-expressed VP1 of DHAV-1. In vitro, mAb 2D10 neutralized DHAV-1 virus. By using an array of overlapping 12-mer peptides, we found that mAb 2D10 recognized phages displaying peptides with the consensus motif LPAPTS. Sequence alignment showed that the epitope ¹⁷³LPAPTS¹⁷⁸ is highly conserved among the DHAV-1 genotypes. Moreover, the six amino acid peptide LPAPTS was proven to be the minimal unit of the epitope with maximal binding activity to mAb 2D10. DHAV-1–positive duck serum reacted with the epitope in dot blotting assay, revealing the importance of the six amino acids of the epitope for antibody-epitope binding. Competitive inhibition assays of mAb 2D10 binding to synthetic LPAPTS peptides and truncated VP1 protein fragments, detected by Western blotting, also verify that LPAPTS was the VP1 epitope.

Conclusions and Significance

We identified LPAPTS as a VP1-specific linear B-cell epitope recognized by the neutralizing mAb 2D10. Our findings have potential applications in the development of diagnostic techniques and epitope-based marker vaccines against DHAV-1.     

The capsid of infectious bursal disease virus contains several small peptides arising from the maturation process of pVP2

The capsid proteins VP2 and VP3 of infectious bursal disease virus, a birnavirus, are derived from the processing of a large polyprotein: NH2-pVP2-VP4-VP3-COOH. Although the primary cleavage sites at the pVP2-VP4 and VP4-VP3 junctions have been identified, the proteolytic cascade involved in the processing of this polyprotein is not yet fully understood, particularly the maturation of pVP2. By using different approaches, we showed that the processing of pVP2 (residues 1 to 512) generated VP2 and four small peptides (residues 442 to 487, 488 to 494, 495 to 501, and 502 to 512). We also showed that in addition to VP2, at least three of these peptides (residues 442 to 487, 488 to 494, and 502 to 512) were associated with the viral particles. The importance of the small peptides in the virus cycle was assessed by reverse genetics. Our results showed that the mutants lacking the two smaller peptides were viable, although the virus growth was affected. In contrast, deletions of the domain 442 to 487 or 502 to 512 did not allow virus recovery. Several amino acids of the peptide 502 to 512 appeared essential for virus viability. Substitutions of the P1 and/or P1" position were engineered at each of the cleavage sites (P1-P1": 441-442, 487-488, 494-495, 501-502, and 512-513). Most substitutions at the pVP2-VP4 junction (512-513) and at the final VP2 maturation cleavage site (441-442) were lethal. Mutations of intermediate cleavage sites (487-488, 494-495, and 501-502) led to viable viruses showing different but efficient pVP2 processing. Our data suggested that while peptides 488 to 494 and 495 to 501 play an accessory role, peptides 442 to 487 and 502 to 512 have an unknown but important function within the virus cycle.     

Insertion of a 27 amino acid viral peptide in different zones of Escherichia coliβ-galactosidase: Effects on the enzyme activity

Abstract Seven internal, putatively exposed regions of Escherichia coli β-galactosidase have been explored regarding their tolerance to insertions of large foreign peptides. Small sequence modifications, including amino acid substitutions and small deletions, were introduced into the lacZ gene to generate unique Bam HI restriction sites. By using these mutant genes, a 27 amino acid stretch reproducing the hypervariable loop of foot-and-mouth disease virus VP1 protein (site A) was further inserted in predefined regions of the enzyme. Among the 13 resulting engineered proteins only three, carrying sequence modifications within a short region, are active, with only moderate reduction of their specific activities. The identified permissive region, which involves amino acids 275 to 279, seems to be a flexible area that could be appropriate incorporate and study biological properties of heterologous peptides in correctly folded β-galactosidase chimeric proteins.     

Synthetic peptides as functional mimics of a viral discontinuous antigenic site.

Functional reproduction of discontinuous antigenic site D of foot-and-mouth disease virus (FMDV) has been achieved by means of synthetic peptide constructions that integrate into a single molecule each of the three protein loops that define the antigenic site. The site D mimics are designed on the basis of the X-ray structure of FMDV type C-S8c1 with the aid of molecular dynamics, so that the five residues assumed to be involved in antigenic recognition are located on the same face of the molecule, exposed to solvent and defining a set of native-like distances and angles. The designed site D mimics are disulphide-linked heterodimers that consist of a larger unit containing VP2(71-84), followed by a polyproline module and by VP3(52-62), and a smaller unit corresponding to VP1(188-194). Guinea pig antisera to the peptides recognize the viral particle and compete with site D-specific monoclonal antibodies, while inoculation with a simple (non-covalently bound) admixture of the three VP1-VP3 sequences yields no detectable virus-specific serum conversion. Similar results have been reproduced in two cattle. Antisera to the peptides are also moderately neutralizing of FMDV in cell culture and partially protective of guinea pigs against challenge with the virus. These results demonstrate functional mimicry of the discontinuous site D by the peptides, which are therefore obvious candidates for a multicomponent peptide-based vaccine against FMDV.     

In Vitro Evolution and Affinity-Maturation with Coliphage Qβ Display

The Escherichia coli bacteriophage, Qβ (Coliphage Qβ), offers a favorable alternative to M13 for in vitro evolution of displayed peptides and proteins due to high mutagenesis rates in Qβ RNA replication that better simulate the affinity maturation processes of the immune response. We describe a benchtop in vitro evolution system using Qβ display of the VP1 G-H loop peptide of foot-and-mouth disease virus (FMDV). DNA encoding the G-H loop was fused to the A1 minor coat protein of Qβ resulting in a replication-competent hybrid phage that efficiently displayed the FMDV peptide. The surface-localized FMDV VP1 G-H loop cross-reacted with the anti-FMDV monoclonal antibody (mAb) SD6 and was found to decorate the corners of the Qβ icosahedral shell by electron microscopy. Evolution of Qβ-displayed peptides, starting from fully degenerate coding sequences corresponding to the immunodominant region of VP1, allowed rapid in vitro affinity maturation to SD6 mAb. Qβ selected under evolutionary pressure revealed a non-canonical, but essential epitope for mAb SD6 recognition consisting of an Arg-Gly tandem pair. Finally, the selected hybrid phages induced polyclonal antibodies in guinea pigs with good affinity to both FMDV and hybrid Qβ-G-H loop, validating the requirement of the tandem pair epitope. Qβ-display emerges as a novel framework for rapid in vitro evolution with affinity-maturation to molecular targets.     

Liposome entrapment and immunogenic studies of a synthetic lipophilic multiple antigenic peptide bearing VP1 and VP3 domains of the hepatitis A virus: a robust method for vaccine design

Multiple antigen peptides (MAP) have been demonstrated to be efficient immunological reagents for the induction of immune responses to a variety of infectious agents. Several peptide domains of the hepatitis A virus (HAV) capsid proteins, mainly VP1 and VP3, are the immunodominant targets for a protective antibody response. In the present study we analyse the immunogenic properties of a tetrameric heterogeneous palmitoyl-derivatised MAP containing two defined HAV peptide sequences, VP1(11–25) and VP3(102–121), in rabbits immunised with either Freund’s adjuvant or multilamellar liposomes. The immune response was evaluated with a specific enzyme immunoassay using MAP[VP1+VP3], VP1 and VP3 as targets. The avidity of the immune response was measured by a non-competitive enzyme-linked immunosorbent assay and by the surface plasmon resonance technology. Antisera raised against the lipo-MAP peptide entrapped in liposomes demonstrated high avidity of binding with affinity rate constants approximately one order of magnitude greater than those obtained with the Freund’s protocol.     

Distribution of conserved and specific epitopes on the VP8 subunit of rotavirus VP4.

Three cDNA clones comprising the VP8 subunit of the VP4 of human rotavirus strain KU (VP7 serotype G1; VP4 serotype P1A) G1 were constructed. The corresponding encoded peptides were designated according to their locations in the VP8 subunit as A (amino acids 1 to 102), B (amino acids 84 to 180), and C (amino acids 150 to 246 plus amino acids 247 to 251 from VP5). In addition, cDNA clones encoding peptide B of the VP8 subunit of the VP4 gene from human rotavirus strains DS-1 (G2; P1B) and 1076 (G2; P2) were also constructed. These DNA fragments were inserted into plasmid pGEMEX-1 and expressed in Escherichia coli. Western immunoblot analysis using antisera to rotavirus strains KU (P1A), Wa (P1A), DS-1 (P1B), 1076 (P2), and M37 (P2) demonstrated that peptides A and C cross-reacted with heterotypic human rotavirus VP4 antisera, suggesting that these two peptides represent conserved epitopes in the VP8 subunit. In contrast, peptide B appears to be involved in the VP4 serotype and subtype specificities, because it reacted only with the corresponding serotype- and subtype-specific antiserum. Antiserum raised against peptide A, B, or C of strain KU contained a lower level of neutralizing activity than did that induced by the entire VP8 subunit. In addition, the serotype-specific neutralizing activity of anti-KU VP8 serum was ablated after adsorption with the KU VP8 protein but not with a mixture of peptides A, B, and C of strain KU, suggesting that most of the serotype-specific epitopes in the VP8 subunit are conformational and are dependent on the entire amino acid sequence of VP8.     

Allele-specific adaptation of poliovirus VP1 B-C loop variants to mutant cell receptors.

Previous work has shown that three different mutations in domain 1 of the poliovirus receptor (Pvr), two in the predicted C'-C" ridge and one in the D-E loop, abolish binding of the P1/Mahoney strain. All three receptor defects could be suppressed by a mutation in the VP1 B-C loop of the viral capsid that was present in all 16 P1/Mahoney isolates adapted to the mutant receptors. To identify allele-specific mutations that enable poliovirus to utilize mutant receptors, and to understand the role of the VP1 B-C loop in adaptation, we selected mutant receptor-adapted viruses derived from two P1/Mahoney variants, one which lacks the VP1 B-C loop and one in which the VP1 B-C loop is replaced with the corresponding sequence from the P2/Lansing strain. Six adapted viral isolates were obtained after passage on mutant receptor-expressing cell lines. Sequence analysis revealed that each virus contained three to five mutations, and a total of 18 amino acid changes at 17 capsid residues were identified. Site-directed mutagenesis was used to evaluate the role of these mutations in adaptation to mutant Pvr. The results demonstrate that mutations in the viral canyon floor and rim are allele specific and compensate only for receptor defects in the C'-C" ridge of Pvr, suggesting that these sites interact in the virus-receptor complex. Furthermore, mutations in the VP1 E-F loop suppressed Pvr D-E loop defects, implying that the Pvr D-E loop contacts the VP1 E-F loop. Most of the other mutations mapped to interior capsid residues, some interacting with the fivefold- or threefold-related protomers. These mutations may regulate receptor interaction by controlling the structural flexibility of the viral capsid. In viruses lacking the VP1 B-C loop, single mutations were not sufficient to confer the adapted phenotype, in contrast to the 414 virus, which contains the B-C loop. Although the VP1 B-C loop appeared to be dispensable for adaptation, it may have provided a selective advantage in adaptation of P1/Mahoney to mutant Pvr.