Rapid detection of genetically modified organisms on a continuous-flow polymerase chain reaction microfluidics

The ability to perform DNA amplification on a microfluidic device is very appealing. In this study, a compact continuous-flow polymerase chain reaction (PCR) microfluidics was developed for rapid analysis of genetically modified organisms (GMOs) in genetically modified soybeans. The device consists of three pieces of copper and a transparent polytetrafluoroethylene capillary tube embedded in the spiral channel fabricated on the copper. On this device, the P35S and Tnos sequences were successfully amplified within 9 min, and the limit of detection of the DNA sample was estimated to be 0.005 ng μl⁻¹. Furthermore, a duplex continuous-flow PCR was also reported for the detection of the P35S and Tnos sequences in GMOs simultaneously. This method was coupled with the intercalating dye SYBR Green I and the melting curve analysis of the amplified products. Using this method, temperature differences were identified by the specific melting temperature values of two sequences, and the limit of detection of the DNA sample was assessed to be 0.01 ng μl⁻¹. Therefore, our results demonstrated that the continuous-flow PCR assay could discriminate the GMOs in a cost-saving and less time-consuming way.     

Multiplex polymerase chain reaction/membrane hybridization assay for detection of genetically modified organisms

To improve detection efficiency and result accuracy, four screening primer pairs, four identifying primer pairs, one common primer pair and corresponding probes were designed for the development of multiplex polymerase chain reaction/membrane hybridization assay (MPCR-MHA) for detection of the foreign genes insert in genetically modified organisms (GMOs). After detecting condition and parameter were optimized and determined, MPCR reactions were developed for amplifying several target genes simultaneously in one tube. Primers were labeled with biotin at the 5'-end; biotinylated MPCR products were detected by hybridization to the oligonucleotide probes immobilized on a membrane with subsequent colorimetric detection to confirm hybridization. The testing of screening primers can judge whether the sample contains GMOs, and that of identifying primers can further judge what kinds of trait genes are contained in the sample. We detected nine soybean samples, six maize samples, seven potato samples and two rice samples by the MPCR-MHA method; at the same time we also detected them with single PCR-MHA method. The results between two methods have good consistency.     

Flow cytometric detection of specific genes in genetically modified bacteria using in situ polymerase chain reaction

Abstract Mycelium of Pleurotus ostreatus var. florida with a decreased growth rate contained seven double-stranded RNA segments and isometrical virus particles with diameters of 24 and 30 nm. Mycelium with a normal growth rate lacked dsRNA. Protoclones from virus-containing mycelium contained one to seven of these dsRNA segments in varying concentrations. The exact correlation between slow growth and the presence of dsRNA molecules could not be established. Infection of virus-free protoplasts with PEG-precipitated virus particles resulted in mycelium that stably maintained the 2.4 kbp dsRNA.     

Automated polymerase chain reaction product sample preparation for capillary electrophoresis analysis

The analysis of crude polymerase chain reaction (PCR) products by capillary electrophoresis (CE) is often compromised due to the presence of a high concentration of salt. Salt interferes with the electrokinetic injection and induces localized heating within the column; hence, PCR products must be desalted or cleaned-up prior to CE analysis. A variety of commercial clean-up systems are available that have been traditionally used to prepare PCR products for cloning, sequencing and digestion with restriction enzymes. These systems were tested for their effectiveness in preparing PCR products for CE analysis and were evaluated based on CE resolution, salt removal, DNA recovery, processing time and cost. One particularly effective clean-up system, membrane dialysis, was automated using a robotic workstation.     

转基因棉花MON88701品系特异性实时荧光PCR检测方法的建立

【目的】建立转基因棉花MON88701品系特异性实时荧光聚合酶链反应(polymerase chain reaction,PCR)检测方法。【方法】利用实时荧光PCR技术,根据转基因棉花MON88701品系特异性序列设计引物和探针,建立转基因棉花MON88701实时荧光PCR检测方法,并测定本方法的灵敏度、特异性及可重复性。【结果】建立的检测方法特异于转基因棉花MON88701成分的检测,灵敏度测试表明其定量下限为34拷贝;重复性试验显示其相对标准偏差在可接受范围内。【结论】本研究建立的转基因棉花MON88701品系特异性实时荧光PCR检测方法具有良好的特异性和高灵敏度,适合对转基因棉花MON88701品系进行检测。     

Quantitation of polymerase chain reaction products by capillary electrophoresis using laser fluorescence

In samples where the amount of DNA is limited, the polymerase chain reaction (PCR) can amplify specific regions of the DNA. A quantitative analysis of the PCR product would be desirable to ensure sufficient DNA is available for analysis. In this study, we examine the use of capillary electrophoresis (CE) with laser fluorescence detection for quantitation of PCR products. A coated open tubular capillary was used with a non-gel sieving buffer and a fluorescent intercalating dye to obtain results within 20 minutes. Using an internal standard, peak migration time was below 0.1% relative standard deviation (R.S.D.) with a peak area precision of 3% R.S.D. In comparison to quantitation by hybridization, (i.e., slot blot) and spectrophotometric analysis, capillary electrophoresis shows distinct advantages due to its ability to separate unincorporated primers and PCR byproducts from the targeted PCR product. The results demonstrate that CE can be used to monitor the quality and quantity of the PCR product.     

Development of melting temperature-based SYBR Green I polymerase chain reaction methods for multiplex genetically modified organism detection

Commercialization of several genetically modified crops has been approved worldwide to date. Uniplex polymerase chain reaction (PCR)-based methods to identify these different insertion events have been developed, but their use in the analysis of all commercially available genetically modified organisms (GMOs) is becoming progressively insufficient. These methods require a large number of assays to detect all possible GMOs present in the sample and thereby the development of multiplex PCR systems using combined probes and primers targeted to sequences specific to various GMOs is needed for detection of this increasing number of GMOs. Here we report on the development of a multiplex real-time PCR suitable for multiple GMO identification, based on the intercalating dye SYBR Green I and the analysis of the melting curves of the amplified products. Using this method, different amplification products specific for Maximizer 176, Bt11, MON810, and GA21 maize and for GTS 40-3-2 soybean were obtained and identified by their specific Tm. We have combined amplification of these products in a number of multiplex reactions and show the suitability of the methods for identification of GMOs with a sensitivity of 0.1% in duplex reactions. The described methods offer an economic and simple alternative to real-time PCR systems based on sequence-specific probes (i.e., TaqMan chemistry). These methods can be used as selection tests and further optimized for uniplex GMO quantification.     

Monitoring genetically modified rhizobia in field soils using the polymerase chain reaction

Monitoring genetically modified (GM) bacterial inoculants after field release using conventional culture methods can be difficult. An alternative is the detection of marker genes in DNA extracted directly from soil, using specific oligonucleotide primers with the polymerase chain reaction (PCR). The PCR was used to monitor survival of two GM Rhizobium leguminosarum bv. viciae inoculants after release in the field at Rothamsted. One strain, RSM2004, is marked by insertion of transposon Tn 5 ; the second strain, CT0370, released at the same site, is modified by chromosomal integration of a single copy of the gene from E. coli conferring GUS activity. Both GM strains provide a realistic case study for the development of PCR-based detection techniques. Specific primers were developed to amplify regions of the Tn 5 and GUS genetic markers using PCR and conditions optimized for each primer set to routinely detect a signal from 10 fg of purified template DNA, the equivalent of one cell per reaction. Procedures to improve the sensitivity of detection are described, to detect fewer than 50 cells g⁻¹ soil in soil-extracted DNA.     

Multiplex polymerase chain reaction and ligation detection reaction/universal array technology for the traceability of genetically modified organisms in foods

A multiplex polymerase chain reaction (PCR) system was developed for the simultaneous detection of target sequences in genetically modified soybean (Roundup Ready) and maize (MON810, Bt176, Bt11, and GA21). Primer pairs were designed to amplify the junction regions of the transgenic constructs analyzed and the endogenous genes of soybean (lectin) and maize (zein) were included as internal control targets to assess the efficiency of all reactions. This multiplex PCR has constituted the basis for an efficient platform for genetically modified organism traceability based on microarray technology. In particular, the ligation detection reaction combined to a universal array approach, using the multiplex PCR as target, was applied. High specificity and sensitivity were obtained.     

Detection of exogenous genes in genetically modified plants with multiplex polymerase chain reaction

To detect exogenous genes in genetically modified plants, we have designed a multiplex polymerase chain reaction (MPCR) system that includes 7 primer pairs. With this method, the promoter, terminator, selection gene, reporter gene, and function gene can be detected simultaneously. The concentrations of each primer were optimized according to AT/TA%. Several genes in plasmid PBI121, genetically modified tobacco, and imported soybeans were detected, and the results were consistent with standard PCR. The method was sensitive enough to detect a single copy sequence.     

A capillary polymerase chain reaction for Salmonella detection from poultry meat

AIMS: In this study, a capillary polymerase chain reaction (cPCR) was applied for Salmonella detection from poultry meat. METHODS AND RESULTS: Salmonella detection limits of the optimized cPCR were determined with DNA templates from the samples of tetrathionate broth (TTB), Rappaport Vassiliadis broth (RVB) and selenite cystine broth (SCB) artificially contaminated with 10-fold dilutions of 6 x 10(8) CFU ml(-1) of pure Salmonella enterica ssp. enterica serovar Enteritidis 64K stock culture. Detection limits of cPCR from TTB, RVB and SCB were found as 6, 6 x 10(1) and 6 x 10(4) CFU ml(-1), respectively. In addition, detection limits of bacteriology were also determined as 6 CFU ml(-1) with TTB and SCB, and 6 x 10(1) CFU ml(-1) with RVB. A total of 200 samples, consisting of 100 chicken and 100 turkey meat samples, were tested with optimized cPCR and bacteriology. Eight and six per cent of the chicken meat samples were found to harbour Salmonella by cPCR and standard bacteriology, respectively. Of six Salmonella isolates, four belonged to serogroup D, two to serogroup B. CONCLUSIONS: The TTB cultures of both artificially and naturally contaminated samples were found to be superior to those of RVB and SCB cultures in their cPCR results. This cPCR, utilizing template from 18-h TTB primary enrichment broth culture, takes approximately 40 min in the successful detection of Salmonella from poultry meat. SIGNIFICANCE AND IMPACT OF THE STUDY: This study shows that cPCR from TTB enrichment culture of poultry meat would enable rapid detection of Salmonella in laboratories with low sample throughput and limited budget.     

Tetrabutylammonium phosphate-assisted separation of multiplex polymerase chain reaction products in non-gel sieving capillary electrophoresis

A method based on non-gel sieving capillary electrophoresis (NGS–CE) with ultraviolet (UV) detection has been developed for the separation of multiplex polymerase chain reaction (PCR) products of three pathogenic bacteria in which hydroxypropylmethylcellulose was used as the sieving medium and dynamic capillary coating. In the method, an ion pair reagent, tetrabutylammonium phosphate (TBAP), was first used in NGS–CE to improve the detection sensitivities and resolutions of DNA fragments. The interaction of TBAP and DNA was proved using the UV spectra of DNA with and without TBAP. Field-enhanced sample injection was used as an on-line preconcentration method to improve the detection sensitivity. The separation of DNA fragments ranging from 100 to 1000 bp was accomplished in 30 min. Three pairs of primers and three PCR products of bacteria were successfully separated in 25 min using the developed method. The intraday relative standard deviations (RSDs) for the migration time and peak area for each PCR product were less than 2.4% (n = 5), and the interday RSDs were less than 6.1% (n = 15).     

Quantitative analysis of DNA aberrations amplified by competitive polymerase chain reaction using capillary electrophoresis

We compared the use of capillary electrophoresis (CE) in a polymer network with the use of slab gel electrophoresis for the quantitative analysis of polymerase chain reaction (PCR)-amplified DNA samples. We quantified residual lymphoma cells carrying a translocation between chromosomes 14 and 18, in consecutive patient peripheral blood samples that were amplified by competitive PCR. For CE analysis we used a 4% linear polyacrylamide network. Results show that the calculated number of translocations in patient samples using both analyses were comparable. We conclude that CE is a sensitive, non-radioactive, fast and accurate method for quantitation of competitive PCR products.     

Mutation detection using ligase chain reaction in passivated silicon-glass microchips and microchip capillary electrophoresis

The ligase chain reaction (LCR) following PCR is one of the most sensitive and specific methods for detecting mutations, especially single nucleotide polymorphisms (SNPs). Performing LCR in microchips remains a challenge because of the inhibitory effect of the internal surfaces of silicon-glass microchips. We have tested a dynamic polymer-based surface passivation method for LCR conducted in oxide-coated silicon-glass microchips. The combination of polyvinylpyrrolidone 40 (PVP-40) at 0.75% (w/v) with an excess of the ligase produced successful LCR in the silicon-glass microchips, with yields of ligated primers comparable to reactions performed in conventional reaction tubes. Ligated primers were detected and quantified simply and conveniently using microchip capillary electrophoresis.     

Event-specific qualitative polymerase chain reaction analysis for two T-DNA copies in genetically modified orange Petunia

Plant Cell, Tissue and Organ Culture (PCTOC) - Somatic embryogenesis is a biotechnological tool with high application potential in the in vitro propagation and regeneration of crop plants, such as...     

Rapid method for the detection of genetically engineered microorganisms by polymerase chain reaction from soil and sediments

A rapid and sensitive method for the detection of genetically engineered microorganisms in soil and sediments has been devised by in vitro amplification of the target DNAs by a polymerase chain reaction. A cloned catechol 2,3-dioxygenase gene located on the recombinant plasmid pOH101 was transferred to Pseudomonas putida MMB2442 by triparental crossing and used as a target organism. For the polymerase chain reaction from soil and sediment samples, the template DNA was released from a 100-mg soil sample. Bacterial seeded soil samples were washed with Tris-EDTA buffer (pH 8.0) and treated with a detergent lysis solution at 100°C. After addition of 1% polyvinylpolypyrrolidine solution, the samples were boiled for 5 min. Supernatant containing nucleic acid was purified with a PCR purification kit. The purified DNA was subjected to polymerase chain reaction, using two specific primers designed for the amplification of catechol 2,3-dioxygenase gene sequences. The detection limit was 10² cells per gram of soil. This method is rapid and obviates the need for lengthy DNA purification from soil samples. Received 28 February 1997/ Accepted in revised form 23 November 1997