Ultrafast conformational dynamics in cyclic azobenzene peptides of increased flexibility

Structural changes of peptides containing the azobenzene dye 4-aminomethyl-phenylazobenzoic acid (AMPB) are studied with ultrafast spectroscopy. AMPB peptides are a new class of molecules where the photoisomerizable dye azobenzene is linked to the peptide moiety via a flexible methylene spacer. The ultrafast reactions in the femtosecond to nanosecond time domain are investigated for the optical switch AMPB, a linear and cyclic octapeptide, and a bicyclic octapeptide containing an additional disulfide bridge. These molecules with increasing conformational constraints are studied for the cis to trans and the trans to cis photoreactions. For the cis to trans reaction the isomerization of the chromophore occurs fast in the 1-ps range, whereas it is slower (10-ps range) in the trans to cis reaction. In all peptides the structural changes of the chromophore lead to modifications in the peptide structure in the 10-ps-1-ns time range. The results indicate that the chromophore AMPB acts simultaneously as a fast molecular switch and as a sensor for initial conformational dynamics in the peptide. Experiments in the mid-infrared range where the structural changes of the peptide backbone are directly observed demonstrate that the essential part of the structural dynamics in the bicyclic AMPB peptide occurs faster than 10 ns.     

Photomodulation of conformational states. III. Water-soluble bis-cysteinyl-peptides with (4-aminomethyl) phenylazobenzoic acid as backbone constituent

In previous studies we have shown that light-induced cis/trans isomerization of the azobenzene moiety in cyclo-[Ala-Cys-Ala-Thr-Cys-Asp-Gly-Phe-AMPB] [AMPB: (4-aminomethyl)phenylazobenzoic acid] leads both in the monocyclic and in the oxidized bicyclic form to markedly differentiated conformational states in DMSO, a fact that lends itself for photomodulation of the redox potential of such bis-cysteinyl-peptides. For this purpose water-soluble systems are required, and this was achieved by replacing three residues outside the Cys-Ala-Thr-Cys active-site motif of thioredoxin reductase with lysines. The resulting cyclo-[Lys-Cys-Ala-Thr-Cys-Asp-Lys-Lys-AMPB] fully retains its photoresponsive properties in water as well assessed by uv and CD measurements. Paralleling results of the previously investigated azobenzene-containing cyclic peptides, the trans --> cis isomerization of the water-soluble monocyclic and oxidized bicyclic peptide is accompanied by a marked transition from a well-defined conformation to an ensemble of possible conformations. However, the conformational preferences are very dissimilar from those of the DMSO-soluble peptides. In fact, hydrogen bonds as well as secondary structure elements were found that change in the mono- and bicyclic peptide upon irradiation. The photo switch between different turn types and hydrogen bonding networks offers the structural rational for the significantly differentiated redox potentials, but also the possibility of monitoring by femtosecond uv-vis and ir spectroscopy fast and ultra fast backbone rearrangement processes following the electronic trans --> cis isomerization.     

Synthesis and application of an azobenzene amino acid as a light-switchable turn element in polypeptides

The synthesis of an azobenzene amino acid (aa) for use as a photo-inducible conformational switch in polypeptides is described. The compound can be easily incorporated into an aa sequence by solid-phase peptide synthesis using standard 9-fluorenylmethoxycarbonyl methods. A reversible conformational change of the peptide backbone is induced by switching between the cis and trans configurations of the azobenzene moiety by irradiation with light of suitable wavelength. Thermal cis --> trans isomerization of this azobenzene aa is slow, enabling detailed structural investigations of the modified peptides, e.g., using NMR techniques. The total time for the synthesis of the photoswitch is typically 4 d, with an overall yield of 40-50%.     

Synthesis and immunosuppressive activity of new cyclolinopeptide A analogs modified with beta-prolines

Immune response suppressors are used in the medical praxis to prevent graft rejection after organ transplantation and in the therapy of some autoimmune diseases. As a continuation of our previous work searching for new, effective suppressors devoid of toxicity, we present the synthesis, conformational analysis, and biological activity of nonapeptides 1-6, analogs of naturally existing immunomodulatory peptide CLA. New CLA analogs were modified with (S)-beta(2)-iso-proline 7 or (S)-beta(3)-homo-proline 8, respectively. The conformational influence of the beta-iso-proline and beta-homo-proline building blocks was analyzed by NMR spectroscopy. Peptides 1-6 exist as a mixture of four isomers due to cis/trans isomerization of the Xxx-Pro peptide bond. The major isomers of peptides 1, 3, and 4 contain all peptide bonds of the trans geometry. The geometry of the proline-proline bond of the second populated isomer of peptides 3 and 4 is cis. The proline-proline peptide bond is cis for the major isomers of peptides 2, 5, and 6. The peptides were tested for their ability to suppress the proliferative response of mouse splenocytes to T- and B-cell mitogens and the secondary humoral immune response to sheep erythrocytes in vitro in parallel with a reference drug-cyclosporine A. The immunoregulatory actions of the peptides depended on the position and content of proline isomers and were, with some exceptions, strongly inhibitory at the highest dose tested (100 microg/ml). In addition, the peptides were practically devoid of toxicity at that dose. In conclusion, the replacement of Pro by beta-Pro may be useful for fine-tuning CLA immunosuppressive potency and undesirable toxicity.     

A conformational two-state peptide model system containing an ultrafast but soft light switch

Combining an azobenzene chromophore with the bis-cysteinyl active-site sequence of the protein disulfide isomerase (PDI) we constructed a simple but promising model for allosteric conformational rearrangements. Paralleling cellular signaling events, an external trigger, here absorption of a photon, leads to a structural change in one part of the molecule, namely the azobenzene-based chromophore. The change in geometry translates to the effector site, in our case the peptide sequence, where it modifies covalent and nonbonded interactions and thus leads to a conformational rearrangement. NMR spectroscopy showed that the trans-azo and cis-azo isomer of the cyclic PDI peptide exhibit different, but well-defined structures when the two cystine residues form a disulfide bridge. Without this intramolecular cross-link conformationally more variable structural ensembles are obtained that again differ for the two isomeric states. Ultrafast UV/Vis spectroscopy confirmed that the rapid isomerization of azobenzene is not significantly slowed down when incorporated into the cyclic peptides, although the amplitudes of ballistic and diffusive pathways are changed. The observation that most of the energy of an absorbed photon is dissipated to the solvent in the first few picoseconds when the actual azo-isomerization takes place is important. The conformational rearrangement is weakly driven due to the absence of appreciable excess energy and can be described as biased diffusion similar to natural processes.     

Photomodulation of conformational states. Synthesis of cyclic peptides with backbone-azobenzene moieties.

The search for photoresponsive conformational transitions accompanied by changes in physicochemical and biological properties led us to the design of small cyclic peptides containing azobenzene moieties in the backbone. For this purpose, (4-aminomethyl)phenylazobenzoic acid (H-AMPB-OH) and (4-amino)phenylazobenzoic acid (H-APB-OH) were synthesized and used to cyclize a bis-cysteinyl-octapeptide giving monocyclic derivatives in which additional conformational restriction could be introduced by conversion to bicyclic structures with a disulphide bridge. While synthesis with H-AMPB-OH proceeded smoothly on a chlorotrityl-resin with Fmoc/tBu chemistry, the poor nucleophilicity of the arylamino group of H-APB-OH required special chemistry for satisfactory incorporation into the peptide chain. Additional difficulties were encountered in the reductive cleavage of the S-tert-butylthio group from the cysteine residues since concomitant reduction of the azobenzene moiety took place at competing rates. This difficulty was eventually bypassed by using the S-trityl protection. Side-chain cyclization of the APB-peptide proved to be difficult, suggesting that restricted conformational freedom was already present in the monocyclic form, a fact that was fully confirmed by NMR structural analysis. Conversely, the methylene spacer in the AMPB moiety introduced sufficient flexibility for facile and quantitative side-chain cyclization to the bicyclic form. Both of the monocyclic peptides and both of the bicyclic peptides are photoresponsive molecules which undergo cis/trans isomerization reversibly.     

Characterization of secondary amide peptide bond isomerization: thermodynamics and kinetics from 2D NMR spectroscopy

Secondary amide cis peptide bonds are of even lower abundance than the cis tertiary amide bonds of prolines, yet they are of biochemical importance. Using 2D NMR exchange spectroscopy (EXSY) we investigated the formation of cis peptide bonds in several oligopeptides: Ac-G-G-G-NH(2) , Ac-I-G-G-NH(2) , Ac-I-G-G-N-NH(2) and its cyclic form: I-G-G-N in dimethylsulfoxide (DMSO). From the NMR studies, using the amide protons as monitors, an occurrence of 0.13-0.23% of cis bonds was obtained at 296 K. The rate constants for the trans to cis conversion determined from 2D EXSY spectroscopy were 4-9 × 10(-3) s(-1) . Multiple minor conformations were detected for most peptide bonds. From their thermodynamic and kinetic properties the cis isomers are distinguished from minor trans isomers that appear because of an adjacent cis peptide bond. Solvent and sequence effects were investigated utilizing N-methylacetamide (NMA) and various peptides, which revealed a unique enthalpy profile in DMSO. The cyclization of a tetrapeptide resulted in greatly lowered cis populations and slower isomerization rates compared to its linear counterpart, further highlighting the impact of structural constraints.     

Enhanced stability of cis Pro-Pro peptide bond in Pro-Pro-Phe sequence motif

Identification of sequence motifs that favor cis peptide bonds in proteins is important for understanding and designing proteins containing turns mediated by cis peptide conformations. From (1)H NMR solution studies on short peptides, we show that the Pro-Pro peptide bond in Pro-Pro-Phe almost equally populates the cis and trans isomers, with the cis isomer stabilized by a CHc...pi interaction involving the terminal Pro and Phe. We also show that Phe is over-represented at sequence positions immediately following cis Pro-Pro motifs in known protein structures. Our results demonstrate that the Pro-Pro cis conformer in Pro-Pro-Phe sequence motifs is as important as the trans conformer, both in short peptides as well as in natively folded proteins.     

Photomodulation of conformational states. I. Mono- and bicyclic peptides with (4-amino)phenylazobenzoic acid as backbone constituent

The thioredoxin reductase active-site fragment H-Ala-Cys-Ala-Thr-Cys-Asp-Gly-Phe-OH [134-141], which is known for its high tendency to assume an almost identical conformation as in the intact enzyme, was backbone cyclized with the photoresponsive (4-amino)phenylazobenzoic acid (APB) to produce a monocyclic and disulfide-bridged bicyclic APB-peptide. Light-induced reversible cis/trans isomerization occurs at identical extents in both the linear and the two cyclic forms. Nuclear magnetic resonance conformational analysis clearly revealed that in the bicyclic APB-peptide both as a trans- and cis-azo-isomer the constraints imparted by the bicyclic structure do not allow the molecule to relax into a defined low energy conformation, thus making the molecule a frustrated system that flip-flops between multiple conformational states. Conversely, the monocyclic APB peptide folds into a well-defined lowest energy structure as a trans-azo-isomer, which upon photoisomerization to the cis-azo configuration relaxes into a less restricted conformational space. First femtosecond spectroscopic analysis of the dynamics of the photoreaction confirm a fast first phase on the femtosecond time scale related to the cis/trans isomerization of the azobenzene moiety followed by a slower phase in the picosecond time scale that involves an adjustment of the peptide backbone. Due to the well- defined photoresponsive two-state transition of this monocyclic peptide molecule, it represents a model system well suited for studying the ultrafast dynamics of conformational transitions by time-resolved spectroscopy.     

Escherichia coli thioredoxin folds into two compact forms of different stability to urea denaturation

The urea-induced denaturation of Escherichia coli thioredoxin and thioredoxin variants has been examined by electrophoresis on urea gradient slab gels by the method of Creighton [Creighton, T. (1986) Methods Enzymol. 131, 156-172]. Thioredoxin has only two cysteine residues, and these form a redox-active disulfide at the active site. Oxidized thioredoxin-S2 and reduced thioredoxin-(SH)2 each show two folded isomers with a large difference in stability to urea denaturation. The difference in stability is greater for the isomers of oxidized than for the isomers of reduced thioredoxin. At 2 degrees C, the urea concentrations at the denaturation midpoint are approximately 8 and 4.3 M for the oxidized isomers and 4.8 and 3.7 M for the reduced isomers. The difference between the gel patterns of samples applied in native versus denaturing buffer, and at 2 and 25 degrees C, is characteristic for the involvement of a cis-proline-trans-proline isomerization. The data very strongly suggest that the two folded forms of different stabilities correspond to the cis and trans isomers of the highly conserved Pro 76 peptide bond, which is cis in the crystal structure of oxidized thioredoxin. Urea gel experiments with the mutant thioredoxin P76A, with alanine substituted for proline at position 76, corroborate this interpretation. The electrophoretic banding pattern diagnostic for an involvement of proline isomerization in urea denaturation is not observed for oxidized P76A. In broad estimates of delta G degree for the native-denatured transition, the difference in delta G degree (no urea) between the putative cis and trans isomers of the Ile 75-Pro 76 peptide bond is approximately 3 kcal/mol for oxidized thioredoxin and approximately 1.5 kcal/mol for reduced thioredoxin. Since cis oxidized thioredoxin is much more stable than trans, folded oxidized thioredoxin is essentially all cis. In folded reduced thioredoxin, cis and trans interconvert slowly, on the minute time scale at 2 and 25 degrees C. In the absence of urea, the folded reduced thioredoxin is less than a few percent trans. Three additional mutants with additions or substitutions at the active site also show electrophoresis banding patterns consistent with a difference in stability between cis and trans isomers.     

Assembly of binding loops on aromatic templates as VCAM‐1 mimetics

The design and synthesis of cyclic mimetics of VCAM‐1 protein that reproduce the integrin‐binding domain are presented. The unprotected peptide precursor 37 – 43 , Thr‐Gln‐Ile‐Asp‐Ser‐Pro‐Leu, was grafted onto functional templates of type naphthalene, biphenyl and benzyl through the chemoselective formation of C‐ and N‐terminal oximes resulting in a mixture of four isomeric forms due to syn–anti isomerism of the oxime bonds. Some isomers could be monitored by HPLC and identified by NMR. The molecule containing a naphthalene‐derived template was found to inhibit the VCAM‐1/VLA‐4 interaction more efficiently than previously reported for sulfur‐bridged cyclic peptides containing similar sequences. The finding confirms the importance of incorporating conformational constraints between the terminal ends of the peptide loop 37 – 43 in the design of synthetic inhibitors of the VCAM‐1/integrin interaction. Copyright © 1999 European Peptide Society and John Wiley & Sons, Ltd.     

Specificity of the VP1 GH loop of Foot-and-Mouth Disease virus for alphav integrins

Foot-and-mouth disease virus (FMDV) can use a number of integrins as receptors to initiate infection. Attachment to the integrin is mediated by a highly conserved arginine-glycine-aspartic acid (RGD) tripeptide located on the GH loop of VP1. Other residues of this loop are also conserved and may contribute to integrin binding. In this study we have used a 17-mer peptide, whose sequence corresponds to the GH loop of VP1 of type O FMDV, as a competitor of integrin-mediated virus binding and infection. Alanine substitution through this peptide identified the leucines at the first and fourth positions following RGD (RGD+1 and RGD+4 sites) as key for inhibition of virus binding and infection mediated by alphavbeta6 or alphavbeta8 but not for inhibition of virus binding to alphavbeta3. We also show that FMDV peptides containing either methionine or arginine at the RGD+1 site, which reflects the natural sequence variation seen across the FMDV serotypes, are effective inhibitors for alphavbeta6. In contrast, although RGDM-containing peptides were effective for alphavbeta8, RGDR-containing peptides were not. These observations were confirmed by showing that a virus containing an RGDR motif uses alphavbeta8 less efficiently than alphavbeta6 as a receptor for infection. Finally, evidence is presented that shows alphavbeta3 to be a poor receptor for infection by type O FMDV. Taken together, our data suggest that the integrin binding loop of FMDV has most likely evolved for binding to alphavbeta6 with a higher affinity than to alphavbeta3 and alphavbeta8.     

Photomodulation of conformational states. II. Mono- and bicyclic peptides with (4-aminomethyl)phenylazobenzoic acid as backbone constituent

It has been reported that backbone cyclization of octapeptides with the photoresponsive (4-aminomethyl)phenylazobenzoic acid imparts sufficient restraints to induce and stabilize ordered conformations of the peptide backbone in both the cis- and trans-azo-isomers (L. Ulysse, J. Cubillos, and J. Chmielewski, Journal of the American Chemical Society, 1995, Vol. 117, pp. 8466-8467). Correspondingly, the active-site octapeptide fragment H-Ala-Cys-Ala-Thr-Cys-Asp-Gly-Phe-OH [134-141] of thioredoxin reductase, with its high preference for a 3(10)-helix turn conformation centered on the Thr-Cys sequence, was backbone cyclized with this azobenzene moiety in the attempt to design a photoresponsive system where the conformational states of the peptide backbone are dictated by the configuration of the azobenzene and can be further modulated by the disulfide bridge. Nuclear magnetic resonance conformational analysis of the monocyclic compound clearly revealed the presence of two conformational families in both the cis- and trans-azo configuration. Of the higher populated conformational families, the structure of the trans-isomer seems like a pretzel-like folding, while the cis-isomer relaxes into a significantly less defined conformational state that does not exhibit any regular structural elements. Further restrictions imparted by disulfide bridging of the peptide moiety leads to an even better defined conformation for the trans-azo-isomer, whereas the cis-isomer can be described as a frustrated system without pronounced energy minima and thus with little conformational preferences. Our findings would suggest that this photoresponsive peptide template may not be of general usefulness for light-induced conformational transitions between two well-defined conformational states at least under the experimental conditions employed, even in the bicyclic form. However, trans --> cis isomerization of the bicyclic peptide is accompanied by a switch from a well-defined conformation to an ensemble of possible conformations.     

Design and characterization of stimuli-responsive FLAG-tag analogues and the illumination-induced modulation of their interaction with antibody 4E11

An azobenzene group containing beta-amino acid N-Fmoc-4-aminomethyl phenylazobenzoic acid was synthesized and with the exception of the C-terminal amino acid residue was substituted by solid-phase peptide synthesis into all positions of the FLAG sequence (DYKDDDDK), an octapeptide capable of specific interaction with the monoclonal antibody 4E11. The trans state of the beta-amino acid was thermodynamically more stable than the cis state. However, the molecule could be switched into the cis conformation by illumination at 340 nm. Peptides containing the artificial amino acid also became photoresponsive. In the absence of light, the spontaneous back-isomerization into the trans conformation of the photoresponsive was extremely slow (>8 h no significant increase in trans content). When illuminated with visible light (440 nm), the back-isomerization from the cis to the trans state was accelerated and occurred with a half-life of approximately 10 min. The cis form of the photopeptides was more hydrophilic than the trans form, as evidenced by differences in the retention time of the two isomeric forms in reversed-phase chromatography. Photopeptides that contained the intact sequences responsible for binding of the FLAG tag to the antibody, namely, the DYK motive at the N-terminus, showed binding to the antibody in both a dot blot immunoassay and in Biacore binding studies, albeit with lower affinity than the unmodified FLAG sequence. Peptides with a substitution in positions 4-6 showed differences in binding strength between the trans and the cis form in the Biacore studies, no such difference could be observed for the peptide with a substitution in position 7.     

Structure characterization of the central repetitive domain of high molecular weight gluten proteins. I. Model studies using cyclic and linear peptides.

The high molecular weight (HMW) proteins from wheat contain a repetitive domain that forms 60-80% of their sequence. The consensus peptides PGQGQQ and GYYPTSPQQ form more than 90% of the domain; both are predicted to adopt beta-turn structure. This paper describes the structural characterization of these consensus peptides and forms the basis for the structural characterization of the repetitive HMW domain, described in the companion paper. The cyclic peptides cyclo-[PGQGQQPGQGQQ] (peptide 1), cyclo-[GYYPTSPQQGA] (peptide 2), and cyclo-[PGQGQQGYYPTSPQQ] (peptide 3) were prepared using a novel synthesis route. In addition, the linear peptides (PGQGQQ)n (n = 1, 3, 5) were prepared. CD, FTIR, and NMR data demonstrated a type II beta-turn structure at QPGQ in the cyclic peptide 1 that was also observed in the linear peptides 9PGQGQQ)n. A type I beta-turn was observed at YPTS and SPQQ in peptides 2 and 3, with additional beta-turns of either type I or II at GAGY (peptide 2) and QQGY (peptide 3). The proline in YPTS showed considerable cis/trans isomerization, with up to 50% of the population in the cis-conformation; the other prolines were more than 90% in the trans conformation. The conversion from trans to cis destroys the type I beta-turn at YPTS, but leads to an increase in turn character at SPQQ and GAGY (peptide 2) or QQGY (peptide 3).     

Configurationally driven folding of model tetrapeptides containing L- or D-morpholine-3-carboxylic acids as beta-turn nucleators

The conformational analysis by NMR, IR, and molecular modeling of tetrapeptides containing morpholine-3-carboxylic acid (Mor) as a proline surrogate is presented. The relationship between the chirality of the cyclic amino acid at position i+1 and the turn propensity is maintained with respect to the reference proline-containing peptides, although marked differences in the type of folded structures were observed. The conformational profile of morpholine-containing turn peptides as a function of the chirality of the cyclic amino acid indicated that the heterochiral tetrapeptide containing the D-isomer of the cyclic amino acid is more prone to nucleate compact folded structures, although with no resemblance to the beta-turn structures of D-proline-containing peptides. Also, the solvation system proved to influence the organization of folded structures, as in the more interactive CD(3)CN the model peptides showed more compact conformations. The L-Mor-containing peptide displayed two rotamers at the Val-Mor amide bond. The trans isomer did not experience any turn structures, nor any intramolecular hydrogen-bonds, whereas the cis isomer showed a strong preference for a type VI beta-turn structure, thus providing a different conformational asset with respect to the beta-turn structure as reported for the reference L-proline model peptide.     

Photoreversible antigen-antibody reactions

A monoclonal antibody (Z1H01) for an oligopeptide carrying an azobenzene group, was prepared under conditions where the azobenzene group is in the trans form. The antibody bound the hapten peptide effectively when the hapten peptide is in the trans form (K = 5 x 10(7) M-1), but the antibody released the hapten under irradiation with UV light where the hapten is in the cis form. The antibody bound the hapten again, when the hapten reverted to the trans form after irradiation with visible light.     

Thermodynamic origin of cis/trans isomers of a proline-containing beta-turn model dipeptide in aqueous solution: a combined variable temperature 1H-NMR, two-dimensional 1H,1H gradient enhanced nuclear Overhauser effect spectroscopy (NOESY), one-dimensional steady-state intermolecular 13C,1H NOE, and molecular dynamics study

The cis/trans conformational equilibrium of the two Ac-Pro isomers of the beta-turn model dipeptide [13C]-Ac-L-Pro-D-Ala-NHMe, 98% 13C enriched at the acetyl carbonyl atom, was investigated by the use of variable temperature gradient enhanced 1H-nmr, two-dimensional (2D) 1H,1H nuclear Overhauser effect spectroscopy (NOESY), 13C,1H one-dimensional steady-state intermolecular NOE, and molecular dynamics calculations. The temperature dependence of the cis/trans Ala(NH) protons are in the region expected for random-coil peptides in H2O (delta delta/delta T = -9.0 and -8.9 ppb for the cis and trans isomers, respectively). The trans NH(CH3) proton indicates smaller temperature dependence (delta delta/delta T approximately -4.8 ppb) than that of the cis isomer (-7.5 ppb). 2D 1H,1H NOESY experiments at 273 K demonstrate significant NOEs between ProH alpha-AlaNH and AlaNH-NH(R) for the trans isomer. The experimental NOE data, coupled with computational analysis, can be interpreted by assuming that the trans isomer most likely adopts an ensemble of folded conformations. The C-CONH(CH3) fragment exhibits significant conformational flexibility; however, a low-energy conformer resembles closely the beta II-turn folded conformations of the x-ray structure of the related model peptide trans-BuCO-L-Pro-Me-D-Ala-NHMe. On the contrary, the cis isomer adopts open conformations. Steady-state intermolecular solute-solvent (H2O) 13C,1H NOE indicates that the water accessibility of the acetyl carbonyl carbons is nearly the same for both isomers. This is consistent with rapid fluctuations of the conformational ensemble and the absence of a highly shielded acetyl oxygen from the bulk solvent. Variable temperature 1H-nmr studies of the cis/trans conformational equilibrium indicate that the trans form is enthalpically favored (delta H degree = -5.14 kJ mole-1) and entropically (delta S degree = -5.47 J.K-1.mole-1) disfavored relative to the cis form. This demonstrates that, in the absence of strongly stabilizing sequence-specific interresidue interactions involving side chains and/or charged terminal groups, the thermodynamic difference of the cis/trans isomers is due to the combined effect of intramolecular and intermolecular (hydration) induced conformational changes.     

Identification of novel peptide antagonists for GPIIb/IIIa from a conformationally constrained phage peptide library.

Methods have recently been developed to present vast libraries of random peptides on the surface of filamentous phage. To introduce a degree of conformational constraint into random peptides, a library of hexapeptides flanked by cysteine residues (capable of forming cyclic disulfides) was constructed. This library was screened using the platelet glycoprotein, IIb/IIIa, which mediates the aggregation of platelets through binding of fibrinogen. A variety of peptides containing the sequence Arg-Gly-Asp or Lys-Gly-Asp were discovered and synthesized. The cyclic, disulfide-bonded forms of the peptides bound IIb/IIIa with dissociation constants in the nanomolar range, while reduced forms or an analogue in which Ser replaced the Cys residues bound considerably less tightly. These results demonstrate the feasibility for introducing conformational constraints into random peptide libraries and also demonstrates the potential for using phage peptide libraries to discover pharmacologically active lead compounds.     

Reversible photocontrol of peptide helix content: adjusting thermal stability of the cis state

Cross-linking reagents based on an azobenzene core can be used to reversibly photoregulate secondary structure when introduced as intramolecular bridges in peptides and proteins. Photoisomerization of the azobenzene core in the trans to cis direction is triggered by photon absorption but isomerization from cis to trans occurs thermally as well as photochemically. The rate of the thermal process effectively determines the half-life of the cis form as well as the extent to which the trans form can be recovered. We designed and characterized a series of methanethiosulfonate (MTS)-bearing thiol-reactive azo-benzene-based cross-linkers. These cross-linkers are shown to permit photoregulation of helix content in a test peptide with half-lives for the cis conformation ranging from 11 s to 43 h at 25 degrees C. The cross-linkers described here thus broaden the range of reagents available for reversible photocontrol of peptide and protein conformation.