Growth and crown efficiency of height repressed lodgepole pine; are suppressed trees more efficient?

Leaf area, crown projection area and growth over the last 5 years were measured to assess growth efficiency (GE) and crown efficiency (CE) of dominant (D), codominant (CD) and suppressed (SP) trees growing in height-repressed (P sites) and normally developing (M sites) lodgepole pine stands. Leaf area index (LAI), hydraulic characteristics, and needle nutrient concentrations were also measured. Volume growth of P site trees between 1994 and 1999 was 46% that of M site trees. Volume growth was closely associated with both hydraulic supply capacity (Q*) and leaf area. Height repression was not associated with lower GE, but P site trees had CE that was 24.5% lower than M site trees. Average GE of D and CD trees was 28% lower than that of SP trees, while mean CE for the D trees was 46% greater than that of CD, and 80% greater than for SP trees. Between M and P sites, canopy LAI and Q* per unit leaf area did not differ. Needle nitrogen (N) concentrations of M site trees were 7.6% greater than for P site trees. SP tree needles had the highest concentration of N and phosphorus. The nutrient advantage enjoyed by SP trees presumably allowed them to maintain higher GE for a given Q*/A_l. The fastest growing trees were the large D and CD trees from M sites. As LAI did not differ between sites, height repression on P sites may be a result of total leaf area being distributed among too many small trees.     

Age‐related Crown Thinning in Tropical Forest Trees

Gap dynamics theory proposes that treefall gaps provide high light levels needed for regeneration in the understory, and by increasing heterogeneity in the light environment allow light‐demanding tree species to persist in the community. Recent studies have demonstrated age‐related declines in leaf area index of individual temperate trees, highlighting a mechanism for gradual changes in the forest canopy that may also be an important, but less obvious, driver of forest dynamics. We assessed the prevalence of age‐related crown thinning among 12 tropical canopy tree species sampled in lowland forests in Panama and Puerto Rico (total N = 881). Canopy gap fraction of individual canopy tree crowns was positively related to stem diameter at 1.3 m (diameter at breast height) in a pooled analysis, with 10 of 12 species showing a positive trend. Considered individually, a positive correlation between stem diameter and canopy gap fraction was statistically significant in 4 of 12 species, all of which were large‐statured canopy to emergent species: Beilschmiedia pendula, Ceiba pentandra, Jacaranda copaia, and Prioria copaifera. Pooled analyses also showed a negative relationship between liana abundance and canopy gap fraction, suggesting that lianas could be partially obscuring age‐related crown thinning. We conclude that age‐related crown thinning occurs in tropical forests, and could thus influence patterns of tree regeneration and tropical forest community dynamics.     

Patterns of branch permeability with crown depth among loblolly pine families differing in growth rate and crown size

Patterns in branch permeability with crown depth and permeability at the top of the main stem were analyzed for loblolly pine (Pinus taeda L.) trees from families selected on the basis of growth rate (fast, slow) and crown size (large, small). Analysis of variance with levels of crown size nested within levels of growth rate was used to test for differences in main stem permeability. Permeability at the top of the stem averaged 2.0×10^–12 m². There were no significant differences in permeability between families selected for fast and slow growth, but permeability was significantly lower for families selected for large crowns than for families selected for small crowns. Branch permeability averaged 0.74×10^–12 m² and decreased significantly with crown depth. Large-crown families had higher overall branch permeability than small-crown families. Average permeability in branches did not differ significantly between fast- and slow-growing families. Large crown-families had significantly larger current leaf area: total leaf area ratios in the lower two-thirds of the crown, and a weak but significant association was found between permeability and current leaf area: total leaf area ratios for a given relative crown depth. Our results suggest that ecotypic and adaptive processes simultaneously affect the overall patterns of stem and branch permeability in loblolly pine families.     

Competition-dependent modelling of foliage biomass in forest stands

Currently, foliage biomass is estimated based on stem diameter or basal area. However, it is questionable whether the relations between foliage and stem observed from plantations of a single tree species can be applied to stands of different structure or species composition. In this paper, a procedure is presented to simulate foliage and branch biomass of tree crowns relative to crown size and light competition. Crowns are divided into layers and segments and each segment is divided into a foliated and an unfoliated fraction. Depending on the competitive status of the segment, leaf area density, specific leaf area and foliated branch fraction are determined. Based on this information, foliage biomass is calculated. The procedure requires a crown shape function and a measure to characterise competition for light and space of each individual segment within the canopy. Simple solutions are suggested for both requirements to enable an application with data that can be measured non-destructively in the field; these were stem position, tree height, crown base height, crown radii and some general crown shape information. The model was parameterised from single trees of Norway spruce and European beech and partly evaluated with independent data close to the investigation plot. Evaluations showed that the model can attribute the ecology of the different crown forms. Modelled foliage distribution for beech and spruce as well as total needle biomass of spruce agreed well with measurements but foliage biomass of beech was underestimated. The results are discussed in the context of a general model application in structured forests.     

Relationships between foliage and conducting xylem in Picea abies (L.) Karst.

Summary The relationship of leaf biomass and leaf area to the conductive area of stems and branches was investigated in Picea abies. A total of 30 trees were harvested to determine if these relationships were different in different crown zones and in trees growing with and without competition for light. Two methods were compared. In the first, data were accumulated from crown zones situated at the top of trees to the bottom; in the second, data were used from individual crown zones. The results indicated that the latter method is much more sensitive in detecting differences in the relationship of leaf biomass or leaf area to conductive area. The analysis also indicated that ratios such as leaf area/sapwood area are frequently size-dependent. This size-dependency can in some cases result in the differences being abscured, but more often leads to the false impression that the relationship between the variables changes. The relationship between leaf biomass and leaf area and conductive area of stems or branches was different in different crown zones and under different growth conditions. The slopes of these regressions appear to increase with decreasing transpirational demand and decrease with increasing hydraulic conductivity. The intercepts are probably related to the amount of identified sapwood actually involved in water conductance.     

Estimation of carbon storage based on individual tree detection in <Emphasis Type="Italic">Pinus densiflora</Emphasis> stands using a fusion of aerial photography and LiDAR data

The objective of this study was to estimate the carbon storage capacity of Pinus densiflora stands using remotely sensed data by combining digital aerial photography with light detection and ranging (LiDAR) data. A digital canopy model (DCM), generated from the LiDAR data, was combined with aerial photography for segmenting crowns of individual trees. To eliminate errors in over and under-segmentation, the combined image was smoothed using a Gaussian filtering method. The processed image was then segmented into individual trees using a marker-controlled watershed segmentation method. After measuring the crown area from the segmented individual trees, the individual tree diameter at breast height (DBH) was estimated using a regression function developed from the relationship observed between the field-measured DBH and crown area. The above ground biomass of individual trees could be calculated by an image-derived DBH using a regression function developed by the Korea Forest Research Institute. The carbon storage, based on individual trees, was estimated by simple multiplication using the carbon conversion index (0.5), as suggested in guidelines from the Intergovernmental Panel on Climate Change. The mean carbon storage per individual tree was estimated and then compared with the field-measured value. This study suggested that the biomass and carbon storage in a large forest area can be effectively estimated using aerial photographs and LiDAR data.     

Spatial variation in sapwood area to leaf area ratio and specific leaf area within a crown of silver birch

Spatial variation in sapwood area to leaf area ratio (Huber value, HV) and specific leaf area (SLA) was examined in branches of closed-canopy trees of silver birch (Betula pendula Roth). HV increased basipetally within a crown and decreased with increasing branch order, but exhibited no significant radial trend along a primary branch. HV was primarily determined by branch position in a crown and branch diameter at the sampling point, being independent of the size of the tree and branch. Greater HV in the lower-crown branches is considered a means to mitigate differences in hydraulic transport capacity between the branches located in different canopy layers. Beside branch position and sampling location on a branch, SLA depended significantly on several other variables characterising tree and branch size. SLA increased basipetally within a crown and along a primary branch, but exhibited no significant trend with branch orders. Because height caused leaf area (A_L) to diminish more rapidly than leaf dry weight, A_L primarily determined the vertical variation in SLA.     

The effects of tree characteristics on rainfall interception in urban areas

Trees in urban areas have significant effects on the urban ecosystem. They can be used to improve the water cycle in urban areas by increasing evaporation and reducing runoff through rainfall interception. Street trees placed in planters on impervious areas reduce runoff by intercepting rainfall and by temporarily storing raindrops on leaves. Therefore, understanding tree canopy geometry and the effect of rainfall interception is important in urban hydrology. In this study, we assessed the effect of tree canopy morphology on rainfall interception using four major street tree species, Sophora japonica L., Ginkgo biloba L., Zelkova serrata (Thunb.) Makino, and Aesculus turbinata Blume, in Seoul, South Korea. We measured throughfall for each tree and also derived three-dimensional data of tree canopy morphology with a terrestrial laser scanner. Tree height, canopy crown width, leaf area index (LAI), leaf area density, mean leaf area, and mean leaf angle were used to determine canopy morphology. The interception rate was mostly affected by the LAI; a higher LAI tended to result in a higher interception rate. Leaf area affected the rainfall interception rate when trees had similar LAIs. These findings on individual tree canopy rainfall interception can help us to understand the importance of rainfall interception in hydrology and for ecological restoration when planning urban green spaces.

     

A direction‐selective local‐thresholding method,DSLT, in combination with a dye‐based method for automated three‐dimensional segmentation of cells and airspaces in developing leaves

Quantifying the anatomical data acquired from three‐dimensional (3D) images has become increasingly important in recent years. Visualization and image segmentation are essential for acquiring accurate and detailed anatomical data from images; however, plant tissues such as leaves are difficult to image by confocal or multi‐photon laser scanning microscopy because their airspaces generate optical aberrations. To overcome this problem, we established a staining method based on Nile Red in silicone‐oil solution. Our staining method enables color differentiation between lipid bilayer membranes and airspaces, while minimizing any damage to leaf development. By repeated applications of our staining method we performed time‐lapse imaging of a leaf over 5 days. To counteract the drastic decline in signal‐to‐noise ratio at greater tissue depths, we also developed a local thresholding method (direction‐selective local thresholding, DSLT) and an automated iterative segmentation algorithm. The segmentation algorithm uses the DSLT to extract the anatomical structures. Using the proposed methods, we accurately segmented 3D images of intact leaves to single‐cell resolution, and measured the airspace volumes in intact leaves.     

Changes in foliage distribution with relative irradiance and tree size: Differences between the saplings ofAcer platanoides andQuercus robur

Dependencies of foliage arrangement and structure on relative irradiance and total height (TH) were studied in saplings ofAcer platanoides andQuercus robur. The distribution of relative foliar area and dry weight (leaf area and weight in a crown layer per total tree leaf area and weight, respectively) were examined with respect to relative height (RH, height in the crown per TH) and characterized by the Weibull function. The distributions of relative area and weight were nearly identical, and the differences between them were attributable to a systematic decline in leaf dry weight per area with increasing crown depth. Foliage distribution was similarly altered by tree size in both species; RH at foliage maximum was lower and relative canopy size (RCS, length of live crown per TH) greater in taller trees. However, the distribution was more uniform inA. platanoides than inQ. robur. Apart from the size effects, relative irradiance also influenced canopy structure; RCS increased inQ. platanoides and decreased inQ. robur with increasing irradiance. As crown architecture was modified by irradiance, foliage distribution was shifted upwards with decreasing irradiance inA. platanoides, but it was independent of irradiance inQ. robur. Higher foliage maximum at lower irradiance in more shade-tolerantA. platanoides is likely to contribute towards more efficient foliar display for light interception and increase the competitive ability of this species in light-limited environments. Consequently, these differences in crown architecture and foliage distribution may partly explain the superior behavior ofA. platanoides in understory.     

Modeling the vertical foliage distribution of an individual <Emphasis Type="Italic">Castanopsis cuspidata</Emphasis> (Thunb.) Schottky,a dominant broad-leaved tree in Japanese warm-temperate forest

The vertical foliage distribution of Castanopsis cuspidata (Thunb.) Schottky was examined in trees of various sizes to clarify its variation in relation to tree size and the light environment in a stand. As indices of these parameters, we analyzed crown social position (CSP: percent of stand height) and specific leaf area (SLA). The vertical foliage distribution of trees was expressed by a Weibull function. The variation in the vertical foliage distribution of C. cuspidata could be categorized into three types using crown social position and light environment. In the first type, leaves were concentrated to the top 20% of the tree; such trees are canopy trees that can receive full sunlight. The second type had a large relative crown depth and an asymmetric distribution with the maximum foliage located near the top of the tree; such trees are suppressed trees whose crowns do not receive sufficient light. The third type had a large relative crown depth and a symmetric distribution; such trees occur in high light environments, although their crowns are in the understory layer. The differences in the vertical foliage distribution are related to the strategies used to capture light. Multiple regression analysis showed that CSP and SLA at the top layer of the tree explained successive changes in the vertical foliage distribution. These results will contribute to scaling-up the vertical foliage distribution to the community level in pure stands of C. cuspidata using an individual-based model.     

Whole-tree sap flow is substantially diminished by leaf herbivory

Ecohydrological models consider the relationship between tree size and structure (especially leaf area index) and water use but generally treat herbivory as a source of unwanted noise in the data. Little is known of how insect damage to leaves influences whole-plant water use in trees. Water use is driven by environmental demand and the total leaf area through which transpiration can occur, but the effects of insects are expected to be complex. Different kinds of insects could have different effects; for example, chewing insects reduce leaf area, whereas sucking and tissue mining insects reduce leaf function without reducing area. Further, plants respond to herbivory in a range of ways, such as by altering leaf production or abscising leaves. We examined the effect of insects on Eucalyptus blakelyi in a woodland near Canberra, Australia, using sap flow velocity as a measure of whole-plant water use. We applied insecticide to 16 trees matched to an untreated control group. After 6 months, we examined the effects on sap flow velocity and crown condition. There was a general increase in sap flow velocity as trees produced leaves over the growing season, but the increase in sap flow for trees without insecticide protection was half that of the protected trees (increase: 4.4 vs. 9.0 cm/h, respectively). This dramatic effect on sap flow was consistent with effects on crown condition. Unprotected trees had 20% less leaf mass per unit stem in the crown. In addition, unprotected trees had a 20% greater loss of leaf functional area from necrosis. It should be noted that these effects were detected in a year in which there was not an outbreak of the psyllids (Homoptera) that commonly cause severe leaf damage to this tree species. It is predicted that the effect in a psyllid outbreak year would be even more substantial. This result underscores the significant impact that insect herbivores can have on an ecological process of significance to the ecosystem, namely, the movement of water from the soil to the atmosphere.     

Estimating Canopy Structure in an Amazon Forest from Laser Range Finder and IKONOS Satellite Observations1

Canopy structural data can be used for biomass estimation and studies of carbon cycling, disturbance, energy balance, and hydrological processes in tropical forest ecosystems. Scarce information on canopy dimensions reflects the difficulties associated with measuring crown height, width, depth, and area in tall, humid tropical forests. New field and spaceborne observations provide an opportunity to acquire these measurements, but the accuracy and reliability of the methods are unknown. We used a handheld laser range finder to estimate tree crown height, diameter, and depth in a lowland tropical forest in the eastern Amazon, Brazil, for a sampling of 300 trees stratified by diameter at breast height (DBH). We found significant relationships between DBH and both tree height and crown diameter derived from the laser measurements. We also quantified changes in crown shape between tree height classes, finding a significant but weak positive trend between crown depth and width. We then compared the field‐based measurements of crown diameter and area to estimates derived manually from panchromatic 0.8 m spatial resolution IKONOS satellite imagery. Median crown diameter derived from satellite observations was 78 percent greater than that derived from field‐based laser measurements. The statistical distribution of crown diameters from IKONOS was biased toward larger trees, probably due to merging of smaller tree crowns, underestimation of understory trees, and overestimation of individual crown dimensions. The median crown area derived from IKONOS was 65 percent higher than the value modeled from field‐based measurements. We conclude that manual interpretation of IKONOS satellite data did not accurately estimate distributions of tree crown dimensions in a tall tropical forest of eastern Amazonia. Other methods will be needed to more accurately estimate crown dimensions from high spatial resolution satellite imagery.     

Hydraulic limitations imposed by crown placement determine final size and shape of Quercus rubra L. leaves

The canopies of large broad‐leaf trees exhibit significant heterogeneity in both micro‐environmental conditions and leaf morphology. Whether the visible differences in the size and shape of leaves from the top and bottom of the crown are determined prior to bud break or result from different patterns of leaf expansion is not known. Analysis of ontogenetic changes of both the degree of lobing and vein density in Quercus rubra demonstrates that leaves throughout the crown are identical in size and shape at the time of bud break. Morphological adaptation to the local micro‐environment takes place during the expansion phase and starts after the determination of the vascular architecture has been completed. Leaves from the bottom of the crown undergo greater expansion in the tissue close to the main veins than occurs either in the more peripheral tissue of the same leaf or anywhere in leaves from the top of the crown. This results in a water transport system that is well suited to the low evaporative rates near the bottom of the crown, but inadequate for the conditions found at the top of the tree. Acclimation of leaf form and function based upon differential expansion may be entirely driven by the local hydraulic demand during the expansion phase, resulting in leaf size and vein density being determined during development by the same hydraulic properties which will constrain the size of leaf that can be functionally supported at maturity.     

辽东栎林内不同小生境下幼树植冠构型分析

以黄土高原黄龙山林区辽东栎林内3个小生境（林下、林隙、林缘）下辽东栎天然更新幼树为研究对象,采用典型抽样法对辽东栎幼树侧枝、叶片和树冠的空间分布状况以及生物量分配状况进行调查分析,探讨微生境与幼树植冠构型特征的关系,明确辽东栎幼树对不同小生境的适应策略,为栎林经营和林分结构优化提供理论依据。结果显示：（1）3种生境下辽东栎幼树构型发生了可塑性变化,林下幼树树冠层次比较单一,林隙与林缘的幼树树冠层次更加丰富。（2）由林下至林缘,幼树的树高、枝下高呈逐渐减小的趋势,而地径变化趋势与之相反;幼树的冠幅、树冠面积、树冠率呈先增加后减小的趋势,并且林下与林隙、林缘的差异显著;幼树的总体分枝率、逐步分枝率、枝径比呈先增加后减小的趋势。（3）3种生境下,幼树的一级枝的枝长、直径与倾角随着树高的增加而呈减小的趋势,但3种生境的差异不显著;林下一级枝主要分布在冠层中上部,而林隙与林缘一级枝主要分布在冠层中下、中上部。（4）由林下至林缘幼树叶长、叶宽、单叶面积和比叶面积逐渐降低,而单株叶数、叶总面积、叶面积指数呈先增大后减小趋势;与其他2种生境相比林下叶片分布趋于冠层上部。（5）幼树地上部分生物量中林下主干生物量占83%,枝和叶生物量只占17%;而林隙与林缘虽然各部位生物量有所差异但比例基本一致,其中主干占66%左右,枝和叶生物量占34%左右。研究表明,林隙生境下幼树的构型优于林缘和林下生境,在今后栎林的经营中,可以通过适当间伐来增加林隙数量,为森林更新和结构的优化提供有利条件。     

不同生境栓皮栎天然更新幼苗植冠构型分析

栓皮栎存在于秦岭南坡的多种林分中,生活在不同生境中的个体往往形成不同的树冠形态和构型特征。为了说明不同生境条件下栓皮栎幼苗的植冠构型变化,采用典型抽样法,对秦岭南坡3种生境中(林冠下、林隙、林缘)的栓皮栎天然更新幼苗的侧枝、叶片特征及其空间分布进行了调查分析,结果表明:3种不同生境中栓皮栎幼苗植冠形态发生了明显的可塑性变化,(1)林冠下的幼苗明显为开阔型树冠,林隙和林缘处的幼苗树冠相对紧密;(2)幼苗的1级侧枝密度与分枝角度在3种生境下均差异显著(P0.05);从Ⅰ到Ⅳ层,林冠下幼苗的分枝角度在冠层内变化幅度不到5°,而林缘处幼苗的分枝角度变化高达40°;发生5个以上1级侧枝的概率以林冠下最大,为0.6;(3)从林缘、林隙到林冠下,幼苗的叶长、叶宽、单叶面积、叶面积指数逐渐降低,数量叶密度和比叶面积则逐渐增大,与其它两种生境相比,林冠下幼苗的叶片逐渐向树冠上层集中,且以更高序的侧枝为主要着生枝条;(4)林隙中栓皮栎幼苗的树高、地径明显优于林缘和林冠下,缩短了苗木进入主林层的时间,林隙对栓皮栎种群更新有利。在今后栓皮栎林的经营中,可以通过适当间伐来增加林隙数量,为森林更新和结构的优化的提供有利条件。     

Sapwood hydraulic conductivity and leaf area – sapwood area relationships following thinning of a Eucalyptus nitens plantation

This study tested the hypothesis that the relationship between leaf area (projected, or one‐sided) and sapwood area in Eucalyptus nitens (Deane and Maiden) Maiden is affected by thinning treatment. However, no difference in the relationship between leaf area and sapwood area was found 8 years after thinning. This result suggests that a single regression equation can be used to predict the leaf area of trees in thinned and unthinned stands. The relationship was non‐linear, implying a causal relationship between growth rate and the ratio of leaf area to sapwood area (A_l : A_s). Sapwood hydraulic conductivity increased by approximately 100% from breast height to crown base, whereas sapwood area decreased by 19%. This implies that the efficiency of water transport through the sapwood increased by 60% along this length. This conclusion is supported by the A_l : A_s relationships which showed that the sapwood area at crown base supported, on average, close to 60% more leaf area than a similar amount of sapwood area at breast height. That large trees in this study had greater hydraulic conductivity and higher A_l : A_s lends support to the argument that resource capture, and hence growth rate, influence sapwood hydraulic conductivity.     

PLASTICITY OF TREE ARCHITECTURE: SPECIFIC AND ECOLOGICAL VARIATIONS FOUND IN AUBREVILLE'S MODEL

The crown form and branching pattern of sapling and adult trees of Terminalia catappa, T. latifolia, and an unidentified species of Manilkara are described. Leaf distribution (leaf positions within the crown) and leaf area index are given for the three species. Although they all exhibit the same architectural model, the two species of Terminalia maintain a tiered canopy in both sapling and large adult trees, while Manilkara has a sapling with poorly defined tiers and an adult with a hollow, hemispherical crown. Thus, the same architectural model (Aubréville's) can give rise to different crown shapes due to quantitative differences in branch geometry, degree of reiteration, and longevity of leaf-bearing branch units. Conversely, similar crown shapes can be produced by trees with different models. Manilkara conforms to the monolayer model of leaf arrangement at maturity, but Terminalia cannot easily be described as a monolayer or a multilayer. Adaptive geometry of a tree and its architectural model are not equivalent nor necessarily comparable.     

Stomatal activity within the crowns of tall deciduous trees under forest conditions

The variation in stomatal activity within the crowns ofAcer campestre, Carpinus betulus andQuercus cerris was measured by vapour exchange porometer on several summer days in an oak-hornbeam forest, in SW Slovakia, Czechoslovakia. Variation resulted from crown position in the forest stand and from leaf position within the canopy. The highest stomatal conductance was in sunlit sun leaves in the upper part of the canopy. Stomatal conductance decreased with increasing depth in the canopy. The steepest decrease was in the upper canopy, in the intermediate zone between fully sunlit and fully shaded leaves, and was caused by the decline in leaf irradiance and in stomatal density. In codominant trees, the conductance in shade leaves at the base of the crown was significantly lower than in the sun leaves at the top of the crown. In a dominant tree,Q. cerris, the differences in stomatal conductance were small and most frequently insignificant. Variation in incident light also determined the diurnal variation of stomatal conductance with respect to crown aspect. Differences between sun leaves on the east and west facing aspects of the overstory crown ofQ. cerris were demonstrated for several days.     

Model simulations of spatial distributions and daily totals of photosynthesis in Eucalyptus grandis canopies

Summary A simulation model for radiation absorption and photosynthesis was used to test the hypothesis that observed nonuniform distributions of nitrogen concentrations in young Eucalyptus grandis trees result in greater amounts of daily assimilation than in hypothetical trees with uniform N distributions. Simulations were performed for trees aged 6, 9, 12 and 16 months which had been grown in plantations under a factorial combination of two levels of fertilization and irrigation. Observed leaf N distribution patterns yielded daily assimilation rates which were only marginally greater (<5%) than for hypothetical trees with uniform distributions. Patterns of assimilation distribution in individual tree crowns closely resembled those for absorbed radiation, rather than for N. These conclusions were unaffected by three choices of alternative leaf area density distributions. The simulation model was also used to calculate hourly and daily rates of canopy assimilation to investigate the relative importance of radiation absorption and total canopy nitrogen on assimilation. Simulated hourly rates of carbon assimilation were often lightsaturated, whereas daily carbon gain was directly proportional to radiation absorbed by the tree crown and to total mass of N in the leaves. Leaf nitrogen concentrations determined photosynthetic capacity, whereas total leaf area determined the amount of radiation absorbed and thus the degree to which capacity was realized. Observed total leaf area and total crown N were closely correlated. The model predicted that nitrogen use efficiences (NUE, mol CO₂ mol^–1 N) were 60% higher for unfertilized than for fertilized trees at low levels of absorbed photosynthetically active radiation (PAR). Nitrogen use efficiency was dependent on fertilizer treatment and on the amount of absorbed PAR; NUE declined with increasing absorbed PAR, but decreased more rapidly for unfertilized than for fertilized trees. Annual primary productivity was linearly related to both radiation absorbed and to mass of N in the canopy.