On the respiratory function of the ribs.

To assess the respiratory function of the ribs, we measured the changes in airway opening pressure (Pao) induced by stimulation of the parasternal and external intercostal muscles in anesthetized dogs, first before and then after the bony ribs were removed from both sides of the chest. Stimulating either set of muscles with the rib cage intact elicited a fall in Pao in all animals. After removal of the ribs, however, the fall in Pao produced by the parasternal intercostals was reduced by 60% and the fall produced by the external intercostals was eliminated. The normal outward curvature of the rib cage was also abolished in this condition, and when the curvature was restored by a small inflation, external intercostal stimulation consistently elicited a rise rather than a fall in Pao. These findings thus confirm that the ribs play a critical role in the act of breathing by converting intercostal muscle shortening into lung volume expansion. In addition, they carry the compression that is required to balance the pressure difference across the chest wall.     

同期双侧胸腔镜联合肋骨接骨板内固定治疗双侧多发肋骨骨折的体会

目的:探讨同期双侧胸腔镜联合肋骨接骨板内固定治疗双侧多发肋骨骨折的方法及临床疗效评价。方法:对13例双侧多发肋骨骨折患者施行同期双侧胸腔镜联合肋骨接骨板内固定治疗,对于合并胸内损伤有胸腔探查指征者,先手术治疗损伤重的一侧;对于肋骨固定为主者,先手术治疗损伤较轻的一侧。固定材料选用形状记忆环抱接骨板。结果:全组13例患者均临床治愈,术后双侧胸痛明显缓解,胸廓畸形纠正,缩短ICU治疗时间,无明显并发症发生。结论:双侧多发肋骨骨折行同期双侧胸腔镜联合肋骨接骨板内固定治疗,能有效恢复胸廓的完整性,减少并发症,改善预后,而且具有创伤小的优点。     

The origin and geometry of radial ribbing patterns in articulate brachiopods

Ackerly, S. C. 1992 07 15: The origin and geometry of radial ribbing patterns in articulate brachiopods.
Geometric models for simple. radial ribbing in articulate brachiopods include (1) ribs radiating isometrically from the shell umbo. (2) divergence of thc ribs from some 'point' within the shell, and (3) reorientation of the ribs at right angles to the shell margin. Analyses of the Orthida, the ancestral taxon of articulate brachiopods, indicate that rib geometries are isometric in Early Cambrian taxa (model 1). but that by the Early Ordovician rib orientations are generally perpendicular to the shell margin (model 3). A combination of functional and morphogenetic Factors explains the ribbing geometries observed in orthide brachiopods.     

Effect of assumed stiffness and mass density on the impact response of the human chest using a three-dimensional FE model of the human body

The mass density, Young's modulus (E), tangent modulus (Et), and yield stress (sigma y) of the human ribs, sternum, internal organs, and muscles play important roles when determining impact responses of the chest associated with pendulum impact. A series of parametric studies was conducted using a commercially available three-dimensional finite element (FE) model, Total HUman Model for Safety (THUMS) of the whole human body, to determine the effect of changing these material properties on the predicted impact force, chest deflection, and the number of rib fractures and fractured ribs. Results from this parametric study indicate that the initial chest apparent stiffness was mainly influenced by the stiffness and mass density of the superficial muscles covering the torso. The number of rib fractures and fractured ribs was primarily determined by the stiffness of the ribcage. Similarly, the stiffness of the ribcage and internal organs contributed to the maximum chest deflection in frontal impact, while the maximum chest deflection for lateral impact was mainly affected by the stiffness of the ribcage. Additionally, the total mass of the whole chest had a moderately effect on the number of rib fractures.     

The two mechanisms of intercostal muscle action on the lung.

The mechanisms of respiratory action of the intercostal muscles were studied by measuring the effect of external forces (F) applied to the ribs and by modeling the effect of F exerted by the intercostal muscles. In five dogs, with the airway occluded, cranial F were applied to individual rib pairs, from the 2nd to the 11th rib pair, and the change in airway opening pressure (Pao) was measured. The ratio Pao/F increases with increasing rib number in the upper ribs (2nd to 5th) and decreases in the lower ribs (5th to 11th). These data were incorporated into a model for the geometry of the ribs and intercostal muscles, and Pao/F was calculated from the model. For interspaces 2-8, the calculated values agree reasonably well with previously measured values. From the modeling, two mechanisms of intercostal muscle action are identified. One is the well-known Hamberger mechanism, modified to account for the three-dimensional geometry of the rib cage. This mechanism depends on the slant of an intercostal muscle relative to the ribs and on the resulting difference between the moments applied to the upper and lower ribs that bound each interspace. The second is a new mechanism that depends on the difference between the values of Pao/F for the upper and lower ribs.     

Numerical investigation of mechanical effects caused by various fixation positions on a new radius intramedullary nail

Fracture of the radius diaphysis is an unusual injury in adults. Open reduction and plate osteosynthesis has been recommended by most of the authors. However, this trend has started to change with the recent introduction of newly designed interlocking intramedullary (IM) nails. New generation of IM nails are developed in order to utilise the advantages of IM nails against plates. Because of its anatomical structure, the radius bone has a complex geometry. Therefore, the callus structure, which forms during the healing period, should not be affected from external effects, such as excessive loads or motion. In this study, effects of radial styloid process (RSP), dorsal side and ulnar notch edge fixations of a new design radius IM nail on the healing period were numerically investigated. A three-dimensional solid model of radius was obtained from computed tomography images of a volunteer and callus structure model, was placed accordingly and different fixations of implants were performed. The models were analysed under axial loads transferring from the wrist to the radius bone using finite element method. As a result of the analysis, fixation of IM nail from RSP was found to be beneficial on healing period in terms of both callus motion and emerging stresses.     

Thoracic morphology in Near Eastern Neandertals and early modern humans compared with recent modern humans from high and low altitudes

Paleoanthropologists have long noted the unique "hyper-barrel-shaped" Neandertal thorax as inferred from fragmentary ribs, clavicles, and sterna. Yet scholars disagree whether the Neandertal thorax represents an adaptation to cold climates or elevated activity levels. Given the difficulties of reconstructing overall chest shape from isolated and fragmentary thoracic skeletal elements, it is worthwhile comparing Neandertals and contemporaneous early modern human fossils from the same geographic region to recent modern human skeletons that are known to have enlarged chests. This study compares thoracic skeletal morphology in two Near Eastern Neandertals (Tabūn C1 and Shanidar 3) and two early modern humans from the same region (Skhūl IV and V) with four samples of recent modern human skeletons from the Andes (n=347): two coastal groups and two groups from high altitudes. The two highland groups, similar to their living descendants, exhibit morphological evidence of anteroposteriorly deep and mediolaterally wide chests as part of respiratory adaptations to high-altitude hypoxia. I calculated the percentage of deviation of each Neandertal and early modern human fossil from the means of the four recent modern human samples for clavicle and rib lengths and curvatures. Shanidar 3 and Tabūn C1 exhibit ribs that are slightly larger and less curved than the Andean samples, indicating slightly larger thoracic skeletons than modern humans who are known to have enlarged chests in response to increased respiratory demands. Skhūl IV and V have significantly shorter ribs with greater curvature suggesting especially narrow thoracic skeletons. Comparisons with Andean populations suggest that the enlarged thoraces of Neandertals may reflect high activity levels, although results from this study do not exclude cold adaptation as an explanatory factor.     

Thoracic skeletal morphology and high-altitude hypoxia in Andean prehistory

Living humans from the highland Andes exhibit antero-posteriorly and medio-laterally enlarged chests in response to high-altitude hypoxia. This study hypothesizes that morphological responses to high-altitude hypoxia should also be evident in pre-Contact Andean groups. Thoracic skeletal morphology in four groups of human skeletons (N = 347) are compared: two groups from coastal regions (Ancón, Peru, n = 79 and Arica, Chile, n = 123) and two groups from high altitudes (San Pedro de Atacama, Chile, n = 102 and Machu Picchu and Cuzco, Peru, n = 43). Osteometric variables that represent proportions of chest width and depth include sternal and clavicular lengths and breadths and rib length, curvature, and area. Each variable was measured relative to body size, transformed into logarithmic indices, and compared across sex-specific groups using ANOVA and Tukey multiple comparison tests. Atacama highlanders have the largest sternal and clavicular proportions and ribs with the greatest area and least amount of curvature, features that suggest an antero-posteriorly deep and mediolaterally wide thoracic skeleton. Ancón lowlanders exhibit proportions indicating narrower and shallower chests. Machu Picchu and Cuzco males cluster with the other highland group in rib curvature and area at the superior levels of the thorax, whereas chest proportions in Machu Picchu and Cuzco females resemble those of lowlanders. The variation in Machu Picchu and Cuzco males and females is interpreted as the result of population migrations. The presence of morphological traits indicative of enlarged chests in some highland individuals suggests that high-altitude hypoxia was an environmental stressor shaping the biology of highland Andean groups during the pre-Contact period.     

The rib cage in normal and emphysematous subjects: a roentgenographic approach

The configuration and motion of the bony rib cage were studied from lateral chest roentgenograms in 10 young normal subjects (YN), 12 elderly normal subjects, and 12 hyperinflated emphysematous patients [chronic obstructive pulmonary disease subjects (COPD), mean total lung capacity (TLC) 133% of predicted]. The acute angles formed by the fourth through seventh ribs with an axial reference plane were measured at residual volume, functional residual capacity, and TLC in both supine and standing positions and correlated with corresponding lung volumes. both rib angles (RA) and changes in RA with lung volume were greatest with the fourth rib and decreased progressively going down (caudad) the chest. At TLC the RA of upper ribs was significantly less in EN and significantly greater in COPD than in YN. RA's were greater supine than standing. When RA information was used together with autopsy data on the angles formed by intercostal muscles with adjacent ribs, intercostal muscle lengths in hyperinflation could be calculated. Computed intercostal muscle length data suggested that hyperinflation should not be associated with degrees of intercostal muscle shortening or overstretching, that would interfere seriously with tension generation.     

Three-dimensional osseo-ligamentous model of the thorax representing initiation of scoliosis by asymmetric growth

A biomechanical model of the human thorax was constructed to investigate how asymmetric growth of the thorax might initiate spinal lateral curvature and axial rotation as seen in scoliosis deformities. Geometric data specifying nodal points of the model were taken from stereo-radiographs of an adolescent subject. An initially symmetrical geometry was created by 'mirroring' measurements of a hemi-thorax and spine. Published data provided cross-sectional measurements of the ribs, material properties of tissues and global flexibilities of the intervertebral motion segments. The ribs, sternum, intervertebral motion segments and intercostal ligaments were represented by elastic elements. Model deformations were calculated by the direct stiffness finite element method, with growth represented by an initial strain term in the constitutive law. Non-linear behavior was accommodated by running the model recursively, with updated node locations at each step. Both stress relaxation and stress modulation of growth in the component tissues were simulated. Thoracic growth of 20% with asymmetric growth of the ribs was simulated to give rib length asymmetries of 11%. similar to that observed in a previous study of patients with idiopathic scoliosis. This resulted in the model having a small thoracic scoliosis curvature convex toward the side of the longer ribs. Variations of the model which permitted free motion at the costo-vertebral joints or produced changes in the curvature of the posterior parts of the ribs resulted in axial rotation of the vertebrae similar to that observed clinically. The model supports the idea that growth asymmetry could initiate a small scoliosis during adolescence.     

肋骨接骨板的临床应用研究

目的:探讨肋骨接骨板治疗外伤性连枷胸的方法和疗效。方法:将我院2008年2月至2011年3月收治的47例外伤性连枷胸患者的临床资料进行回顾性分析。分为内固定组(肋骨接骨板内固定术)21例和保守组(呼吸机气体内固定、加压包扎固定)26例。对二组病例的恢复情况及并发症进行对照比较。结果:骨折全部骨性愈合,内固定组并发症发生率低于保守组(P<0.05),恢复优于保守组,差异有统计学意义(P<0.05)。结论:肋骨接骨板内固定术治疗外伤性连枷胸安全可行,且术后并发症少,值得推广。     

Analysis of quantitative methods for rib seriation using the Spitalfields documented skeletal collection

Accurate rib seriation is essential in forensic anthropology and bioarchaeology for determination of minimum numbers of individuals, sequencing trauma patterns to the chest, and identification of central ribs for use in age estimation. We investigate quantitative methods for rib seriation based on three metric variables: superior (anterior) costo-transverse crest height (SCTCH), articular facet of the tubercle-to-angle length (AFTAL), and head-to-articular facet length (HAFL). The sample consists of complete but unseriated sets of ribs from 133 individuals from the documented (known age and sex) and undocumented skeletal collections of Christ Church Spitalfields, London. This research confirms the results of an earlier study (Hoppa and Saunders [1998] J. Forensic. Sci. 43:174-177) and extends it with the application of two new metric traits and further analyses of sex differences. Analyses of variance showed that SCTCH and AFTAL are significantly associated (P < 0.001) with rib number. Tukey tests of pairwise rib comparisons revealed that for two dimensions (SCTCH and AFTAL), the central ribs (3rd-6th) are significantly distinct from each other (P < 0.05). Using simple ranking of either the SCTCH or AFTAL traits, the proportion of correctly identified ribs within +/-1 position was 80%, compared to initial seriation using morphological methods (Dudar [1993] J. Forensic. Sci. 28:788-797; Mann [1993] J. Forensic. Sci. 28:151-155). Significant sex dimorphism was also identified for these two traits. Analysis of the HAFL trait produced somewhat equivocal results, suggesting that this variable is not reliable for rib seriation. The variable SCTCH proves to be the most useful dimension for seriation, and shows that all but the 7th-9th ribs can be distinguished from others in the sequence, with important results for the 4th rib, where ranking allowed identification in 86% of cases, consistent with morphological methods for intact ribs.     

Stress analysis of a centrally fractured rib fixated by an intramedullary screw

The stress on an intramedullary screw rib fixation device holding together a centrally fractured human rib under in vivo force loadings was studied using finite element analysis (FEA). Validation of the FEA modelling using pullout from porcine ribs proved FEA to be suitable for assessing the structural integrity of screw/bone systems such as rib fixated by a screw. In the human rib fixation investigation, it was found that intramedullary bioresorbable Bioretec screws can fixate centrally fractured human ribs under normal breathing conditions. However, under coughing conditions, simulation showed Bioretec fixating screws to bend substantially. High stresses in the screw are mainly the result of flexion induced by the force loading, and are restricted to thin regions on the outside of the screw shaft. Stiffer screws result in less locally intense stress concentrations in bone, indicating that bone failure in the bone/screw contact regions can be averted with improvements in screw stiffness.     

Costal cartilages--a clue for determination of sex

Mineralization and ossification in the human costal cartilages were studied radiologically. The aim of our study was to evaluate differences between males and females with respect to patterns of costal cartilage calcification and also with respect to ageing. Material for this study consists of 1044 chest and abdominal radiograms of the Czech population from the Department of Radiology (537 males and 507 females). Further radiograms of 18 chest plates were obtained at routine necropsy of cadavers. The radiograms were examined for pattern of ossification of the costal cartilage. The first rib cartilages were not considered because there are no sex differences. The lower ribs exhibit sexual dimorphism. Mineralization and ossification changes appear at the end of puberty and their occurrence increases with age. The sexual difference in pattern of human costal cartilages is statistically significant and thus highly predictive of sex determination.     

Broken ribs: Paleopathological analysis of costal fractures in the human identified skeletal collection from the Museu Bocage,Lisbon, Portugal (late 19th to middle 20th centuries)

Although rarely reported in the anthropological literature, rib fractures are commonly found during the analysis of human skeletal remains of past and modern populations. This lack of published data precludes comparison between studies and restricts an accurate understanding either of the mechanisms involved in thoracic injuries or their impact on past societies. The present study aimed: 1) to report rib fracture prevalence in 197 individuals, 109 males, and 88 females, with ages at death ranging from 13 to 88 years old, from the Human Identified Skeletal Collection, Museu Bocage, Portugal (late 19th‐middle 20th centuries); 2) to test the hypothesis that a higher prevalence of rib stress fractures existed in the 133 individuals who died from respiratory diseases, in a period before antibiotics. The macroscopic analysis revealed 23.9% (n = 47) of individuals with broken ribs. 2.6% (n = 124) out of 4,726 ribs observed were affected. Males presented more rib fractures, and a significantly higher prevalence was noted for older individuals. Fractures were more frequently unilateral (n = 34), left sided (n = 19) and mainly located on the shaft of ribs from the middle thoracic wall. Nineteen individuals presented adjacent fractured ribs. Individuals who died from pulmonary diseases were not preferentially affected. However, a higher mean rate of fractures was found in those who died from pneumonia, a scenario still common nowadays. Since rib involvement in chest wall injury and its related outcomes are important issues both for paleopathology and forensic anthropology, further investigations are warranted. Am J Phys Anthropol 2009. © 2009 Wiley‐Liss, Inc.     

An analysis of possible movements of human upper rib cage

A geometrically realistic mathematical model of the first six ribs and vertebrae of the human rib cage is described. Under the assumption that the individual elements of the rib cage do not deform significantly, the possible range of movements of the model are determined subject to the constraint that the joint surfaces remain in contact. It is shown that normal movements of the ribs cannot be described as a rotation about a single fixed axis. The possible movements of the ribs are analyzed in terms of the misfit incurred at the costovertebral joint surfaces. This analysis shows that there is a movement, corresponding to lateral expansion of the rib for an increase in anteroposterior diameter, in which the misfit at the joint is minimized and also that small deviations from this movement involve only very small degrees of misfit at the joint surfaces. It is concluded that many observed "deformations" of the chest wall can be explained by rigid ribs and normal movements at the costovertebral joints. The interaction between the ribs and the spine is analyzed. It is shown that there can be considerable independent movement of the sternum and the spine, thus allowing mobility of the spine without forcing concomitant movements of rib cage.     

Adaptive modeling of the human rib cage in median sternotomy

This paper describes a limited computer-analyzed kinematic model of the rib cage that can be adapted to individual subjects. Also described is its validation and use in assessing the changes in chest wall shape after coronary artery bypass graft (CABG) surgery in 12 patients. The positions of a small number of anatomic locations on the thoracic spine, ribs, manubrium, and sternum are measured from lateral and posterior-anterior chest radiographs. The computer program puts these two views together removing the magnification and reconstructs any missing points to give a three-dimensional picture of the rib cage to which mathematical models of the bones are scaled. The patients had chest radiographs taken at total lung capacity (TLC) and residual volume (RV) to investigate the source of the restrictive ventilatory defect that follows CABG. The predictions from the model were tested by comparing full-sized computer plots with the actual chest radiographs. The estimates of the bony structures were accurate to +/- 3 degrees for orientations and +/- 6 mm for positions. We found reduced rib motion both "pump-handle" (theta) and "bucket handle" (psi) going from theta, psi left, psi right = 9 degrees, 10 degrees, 14 degrees to 4 degrees, 10 degrees, 9 degrees, respectively, after surgery with P less than 0.025, 0.42, 0.07. The angles were measured from the horizontal and increased caudally. There was also reduction in the range of angles subtended by the arc of the thoracic vertebrae between TLC and RV, which went from 12 degrees to -1 degrees (P less than 0.015). These data explain the fall in lung volumes that follow CABG and provide insight into the contribution made by the ribs and spine in full inspiration and full expiration.     

A NEW TRAVERSODONTID CYNODONT (THERAPSIDA, EUCYNODONTIA) FROM THE MIDDLE TRIASSIC SANTA MARIA FORMATION OF RIO GRANDE DO SUL, BRAZIL

Abstract:  Remains of a peculiar traversodontid cynodont, Protuberum cabralensis gen. et sp. nov., are described herein. The material was collected from two outcrops representing the Therapsid Cenozone (Middle Triassic) of the Santa Maria Formation, and consists of a cranium with most of its dentition preserved and an associated postcranial skeleton. The upper postcanines have two sharp cusps that are connected by a medial crest on unworn postcanines. The specimens possess several autapomorphies, including: (1) presence of thickened bone on the dorsal surface of the skull; (2) thick dorsal ribs, with remarkable processes situated on their dorsal borders that decrease in size distally; and (3) an iliac blade with a series of rugosities along its dorsal border. The lumbar ribs bear overlapping costal plates and have distally projecting rib shafts that differ from the pattern observed in Thrinaxodon , Pascualgnathus and Cynognathus .     

An analysis of action of intercostal muscles in human upper rib cage

The actions of the intercostal and paraspinal muscles in stabilizing the human upper rib cage have been analyzed using a geometrically realistic mathematical model of the first six ribs, vertebrae, and associated musculature. The model suggests roles of the deep layers of erector spinae in stabilizing the vertebral column so that it can support the loads placed upon it by the ribs under physiological load. If we assume that the tension exerted by an intercostal muscle is proportional to its local thickness, the model predicts that the observed distribution of intercostal thickness is close to that which minimizes the stresses in ribs when the model is subjected to peak physiological load. The observed shape of the ribs are optimal to withstand the calculated pattern of loading along their length. These calculations raise the hypothesis that the arrangement of intercostal musculature and rib geometry result in an optimally light rib cage, which is capable of withstanding the loads placed upon it. The analysis of the mechanics of the entire model indicates that the geometrical simplifications made in Hamberger's model are not valid when applied to the rib cage.