Characterization of a novel thermo-stable lipase from endophyte <Emphasis Type="Italic">Pseudomonas putida</Emphasis> in <Emphasis Type="Italic">Pistacia chinensis</Emphasis> Bunge

A novel lipolytic enzyme-producing endophytic strain PC2 was successfully isolated from the seeds of an ideal bioenergy plant Pistacia chinensis Bunge. Based on the analysis of morphology and 16S rRNA sequence, bacterial strain PC2 was identified as a subspecies of Pseudomonas putida, therefore named as P. putida PC2. Whole-genome sequencing showed PC2 contained a 1224-nucleotide lipase gene (named lip-PC2) predicted to encode a 407-amino-acid protein. Purified lipases from both the original PC2 strain and heterologously expressed Escherichia coli were nearly 50 kD with specific activity of 9.48 U/mL. LIP-PC2 displayed the maximal activity at 50°C or pH 8.0, and maintained above 80% relative activity in the range of from 40 to 60°C or pH in the range of from 6.0 to 8.0, indicating thermostable and alkaline properties. Enzyme activity was enhanced by Mg²⁺, Na⁺ and Mn²⁺, but strongly inhibited by Cu²⁺, Zn²⁺ Co²⁺, EDTA as well as organic solvents and surfactants. Additionally, the analysis of amino acid sequence and structure indicated that LIP-PC2 was a novel member belonging to family I.3 of bacterial lipolytic enzymes and its catalytic triad was consisted of Ser-200, Asp-342 and His-374.     

Structural characterization of pyoverdines produced by <Emphasis Type="Italic">Pseudomonas putida</Emphasis> KT2440 and <Emphasis Type="Italic">Pseudomonas taiwanensis</Emphasis> VLB120

The previously unknown sequences of several pyoverdines (PVD) produced by a biotechnologically-relevant bacterium, namely, Pseudomonas taiwanensis VLB120, were characterized by high performance liquid chromatography (HPLC)–high resolution mass spectrometry (HRMS). The same structural characterization scheme was checked before by analysis of Pseudomonas sp. putida KT2440 samples with known PVDs. A new sample preparation strategy based on solid-phase extraction was developed, requiring significantly reduced sample material as compared to existing methods. Chromatographic separation was performed using hydrophilic interaction liquid chromatography with gradient elution. Interestingly, no signals for apoPVDs were detected in these analyses, only the corresponding aluminum(III) and iron(III) complexes were seen. The chromatographic separation readily enabled separation of PVD complexes according to their individual structures. HPLC-HRMS and complementary fragmentation data from collision-induced dissociation and electron capture dissociation enabled the structural characterization of the investigated pyoverdines. In Pseudomonas sp. putida KT2240 samples, the known pyoverdines G4R and G4R A were readily confirmed. No PVDs have been previously described for Pseudomonas sp. taiwanensis VLB120. In our study, we identified three new PVDs, which only differed in their acyl side chains (succinic acid, succinic amide and malic acid). Peptide sequencing by MS/MS provided the sequence Orn-Asp-OHAsn-Thr-AcOHOrn-Ser-cOHOrn. Of particular interest is the presence of OHAsn, which has not been reported as PVD constituent before.     

Industrial biotechnology of <Emphasis Type="Italic">Pseudomonas putida</Emphasis> and related species

Since their discovery many decades ago, Pseudomonas putida and related subspecies have been intensively studied with regard to their potential application in industrial biotechnology. Today, these Gram-negative soil bacteria, traditionally known as well-performing xenobiotic degraders, are becoming efficient cell factories for various products of industrial relevance including a full range of unnatural chemicals. This development is strongly driven by systems biotechnology, integrating systems metabolic engineering approaches with novel concepts from bioprocess engineering, including novel reactor designs and renewable feedstocks.     

Assessing biodegradation of furfuryl alcohol using <Emphasis Type="Italic">Pseudomonas putida</Emphasis> MTCC 1194 and <Emphasis Type="Italic">Pseudomonas aeruginosa</Emphasis> MTCC 1034 and its kinetics

The biodegradation of furfuryl alcohol (FA) in shake flask experiments using a pure culture of Pseudomonas putida (MTCC 1194) and Pseudomonas aeruginosa (MTCC 1034) was studied at 30 °C and pH 7.0. Experiments were performed at different FA concentrations ranging from 50 to 500 mg/l. Before carrying out the biodegradation studies, the bacterial strains were acclimatized to the concentration of 500 mg/l of FA by gradually raising 100 mg/l of FA in each step. The well acclimatized culture of P. putida and P. aeruginosa degraded about 80 and 66% of 50 mg/l FA, respectively. At higher concentration of FA, the percentage of FA degradation decreased. The purpose of this study was to determine the kinetics of biodegradation of FA by measuring biomass growth rates and concentration of FA as a function of time. Substrate inhibition was calculated from experimental growth parameters using the Haldane equation. Data for P. putida were determined as µ _max ?=?0.23 h^?1, K _s ?=?23.93 mg/l and K _i ?=?217.1 mg/l and for P. aeruginosa were determined as µ _max ?=?0.13 h^?1, K _s ?=?21.3 mg/l and K _i ?=?284.9 mg/l. The experimental data were fitted in Haldane, Aiba and Edwards inhibition models.     

<Emphasis Type="Italic">Ty</Emphasis>1<Emphasis Type="Italic">/copia</Emphasis>- and <Emphasis Type="Italic">Ty</Emphasis>3<Emphasis Type="Italic">/gypsy</Emphasis>-like DNA sequences in <Emphasis Type="Italic">Helianthus </Emphasis>species

Two repeated DNA sequences isolated from a partial genomic DNA library of Helianthus annuus, p HaS13 and p HaS211, were shown to represent portions of the int gene of a Ty3 /gypsy retroelement and of the RNase-Hgene of a Ty1 /copia retroelement, respectively. Southern blotting patterns obtained by hybridizing the two probes to BglII- or DraI-digested genomic DNA from different Helianthus species showed p HaS13 and p HaS211 were parts of dispersed repeats at least 8 and 7 kb in length, respectively, that were conserved in all species studied. Comparable hybridization patterns were obtained in all species with p HaS13. By contrast, the patterns obtained by hybridizing p HaS211 clearly differentiated annual species from perennials. The frequencies of p HaS13- and p HaS211-related sequences in different species were 4.3x10(4)-1.3x10(5) copies and 9.9x10(2)-8.1x10(3) copies per picogram of DNA, respectively. The frequency of p HaS13-related sequences varied widely within annual species, while no significant difference was observed among perennial species. Conversely, the frequency variation of p HaS211-related sequences was as large within annual species as within perennials. Sequences of both families were found to be dispersed along the length of all chromosomes in all species studied. However, Ty3 /gypsy-like sequences were localized preferentially at the centromeric regions, whereas Ty1/ copia-like sequences were less represented or absent around the centromeres and plentiful at the chromosome ends. These findings suggest that the two sequence families played a role in Helianthusgenome evolution and species divergence, evolved independently in the same genomic backgrounds and in annual or perennial species, and acquired different possible functions in the host genomes.     

Utilization of <Emphasis Type="Italic">fadA</Emphasis> knockout mutant <Emphasis Type="Italic">Pseudomonas putida</Emphasis> for overproduction of medium chain-length-polyhydroxyalkanoate

The fadBA operon in the fatty acid β-oxidation pathway of P. putida KCTC1639 was blocked to induce a metabolic flux of the intermediates to the biosynthesis of medium chain-length PHA (mcl-PHA). Succinate at 150 mg l⁻¹ stimulated cell growth and also the biosynthesis of medium chain-length-polyhydroxyalkanoate. pH-stat fed-batch cultivation of the fadA knockout mutant P. putida KCTC1639 was carried out for 60 h, in which mcl-PHA reached 8 g l⁻¹ with a cell dry weight of 10.3 g l⁻¹.     

Vanillin production using <Emphasis Type="Italic">Escherichia coli</Emphasis> cells over-expressing isoeugenol monooxygenase of <Emphasis Type="Italic">Pseudomonas putida</Emphasis>

The isoeugenol monooxygenase gene of Pseudomonas putida IE27 was inserted into an expression vector, pET21a, under the control of the T7 promoter. The recombinant plasmid was introduced into Escherichia coli BL21(DE3) cells, containing no vanillin-degrading activity. The transformed E. coli BL21(DE3) cells produced 28.3 g vanillin/l from 230 mM isoeugenol, with a molar conversion yield of 81% at 20°C after 6 h. In the reaction system, no accumulation of undesired by-products, such as vanillic acid or acetaldehyde, was observed.     

The <Emphasis Type="Italic">Caenorhabditis</Emphasis><Emphasis Type="Italic">briggsae</Emphasis> genome contains active <Emphasis Type="Italic">CbmaT1</Emphasis> and <Emphasis Type="Italic">Tcb1</Emphasis> transposons

The maT clade of transposons is a group of transposable elements intermediate in sequence and predicted protein structure to mariner and Tc transposons, with a distribution thus far limited to a few invertebrate species. We present evidence, based on searches of publicly available databases, that the nematode Caenorhabditis briggsae has several maT-like transposons, which we have designated as CbmaT elements, dispersed throughout its genome. We also describe two additional transposon sequences that probably share their evolutionary history with the CbmaT transposons. One resembles a fold back variant of a CbmaT element, with long (380-bp) inverted terminal repeats (ITRs) that show a high degree (71%) of identity to CbmaT1. The other, which shares only the 26-bp ITR sequences with one of the CbmaT variants, is present in eight nearly identical copies, but does not have a transposase gene and may therefore be cross mobilised by a CbmaT transposase. Using PCR-based mobility assays, we show that CbmaT1 transposons are capable of excising from the C. briggsae genome. CbmaT1 excised approximately 500 times less frequently than Tcb1 in the reference strain AF16, but both CbmaT1 and Tcb1 excised at extremely high frequencies in the HK105 strain. The HK105 strain also exhibited a high frequency of spontaneous induction of unc-22 mutants, suggesting that it may be a mutator strain of C. briggsae.     

Synthesis and biotransformation of 2-alkyl-4(1<Emphasis Type="Italic">H</Emphasis>)-quinolones by recombinant <Emphasis Type="Italic">Pseudomonas putida</Emphasis> KT2440

2-Alkyl-4(1H)-quinolones (AQs) and related derivatives, which exhibit a variety of biological properties, are secondary metabolites produced by, e.g., Pseudomonas and Burkholderia spp. Due to their main role as signaling molecules in the quorum sensing system of Pseudomonas aeruginosa, 2-heptyl-4(1H)-quinolone (HHQ) and its 3-hydroxy derivative, termed the “Pseudomonas quinolone signal” (PQS), have received considerable attention. Since chemical synthesis of different AQs is complex, we assessed the applicability of recombinant P. putida KT2440 strains for the biosynthetic production of AQs. In mineral salts medium supplemented with octanoate and anthranilate, batch cultures of P. putida KT2440 [pBBR-pqsABCD] produced about 45 μM HHQ, 30% and 70% of which were localized in the culture supernatant and methanolic cell extract, respectively. 2,4-Dihydroxyquinoline and minor amounts of C₃- to C₁₃-saturated and C_7:1 to C_13:1 monounsaturated AQs were formed as by-products. Mass spectrometry and nuclear magnetic resonance analyses spectroscopy indicated that unsaturated AQs having the same molecular mass are cis and trans isomers rather than position isomers, with the double bond located between the α and β carbon of the alkyl chain. Supplementing the cultures with hexanoate instead of octanoate shifted the AQ profile towards increased formation of C₅-AQ. Individual AQs can be prepared from concentrated methanolic extracts by preparative high-performance liquid chromatography (HPLC). Regioselective hydroxylation of HHQ to PQS can be achieved in >90% yield by biotransformation with P. putida KT2440 [pBBR-pqsH]. PQS can be isolated from methanolic cell extracts by HPLC, or be precipitated as Fe(III)-PQS complex. Preparation of a library of AQs will facilitate studies on the biological functions of these compounds.     

Development and relations of <Emphasis Type="Italic">Fusarium culmorum</Emphasis> and <Emphasis Type="Italic">Pseudomonas fluorescens</Emphasis> in soil

The development of Fusarium culmorum and Pseudomonas fluorescens in soil, and the relations between them, were studied using membrane filters containing the fungus, the bacterium, or both microorganisms; the filters were incubated in soil. F. culmorum was identified by indirect immunofluorescence; the GUS-labeled strain was used to visualize P. fluorescens. It was found that F. culmorum introduced in soil can develop as a saprotroph, with the formation of mycelium, macroconidia, and a small amount of chlamydospores. Introduction of glucose and cellulose resulted in increased density of the F. culmorum mycelium and macroconidia. P. fluorescens suppressed the development of the F. culmorum mycelium in soil, but stimulated chlamydospore formation. Decreased mycelial density in the presence of P. fluorescens was more pronounced in soil without additions and less pronounced in the case of introduction of glucose or cellulose. F. culmorum had no effect on P. fluorescens growth in soil.     

Microbial production of <Emphasis Type="Italic">cis</Emphasis>-1,2-dihydroxy-cyclohexa-3,5-diene-1-carboxylate by genetically modified <Emphasis Type="Italic">Pseudomonas putida</Emphasis>

Arene cis-diols are interesting chemicals because of their chiral structures and great potentials in industrial synthesis of useful chiral chemical products. Pseudomonas putida KT2442 was genetically modified to transform benzoic acid (benzoate) to 1,2-dihydroxy-cyclohexa-3,5-diene-1-carboxylic acid (DHCDC) or named benzoate cis-diol. BenD gene encoding cis-diol dehydrogenase was deleted to generate a mutant named P. putida KTSY01. Genes benABC encoding benzoate dioxygenase were cloned into plasmid pSYM01 and overexpressed in P. putida KTSY01. The recombinant bacteria P. putida KTSY01 (pSYM01) showed strong ability to transform benzoate to DHCDC. DHCDC of 2.3 g/L was obtained with a yield of 73% after 24 h of cultivation in shake flasks incubated under optimized growth conditions. Transformation of benzoate carried out in a 6-L fermentor using a benzoate fed-batch process produced over 17 g/L DHCDC after 48 h of fermentation. The average DHCDC production rate was 0.356 g L⁻¹ h⁻¹. DHCDC purified from the fermentation broth showed a purity of more than 95%, and its chemical structure was confirmed by nuclear magnetic resonance.     

Kinetics of BTEX biodegradation by a coculture of <Emphasis Type="Italic">Pseudomonas putida</Emphasis> and<Emphasis Type="Italic"> Pseudomonas fluorescens</Emphasis> under hypoxic conditions

Pseudomonas putida and Pseudomonas fluorescens present as a coculture were studied for their abilities to degrade benzene, toluene, ethylbenzene, and xylenes (collectively known as BTEX) under various growth conditions. The coculture effectively degraded various concentrations of BTEX as sole carbon sources. However, all BTEX compounds showed substrate inhibition to the bacteria, in terms of specific growth, degradation rate, and cell net yield. Cell growth was completely inhibited at 500mgl^–1 of benzene, 600mgl^–1 of o-xylene, and 1000mgl^–1 of toluene. Without aeration, aerobic biodegradation of BTEX required additional oxygen provided as hydrogen peroxide in the medium. Under hypoxic conditions, however, nitrate could be used as an alternative electron acceptor for BTEX biodegradation when oxygen was limited and denitrification took place in the culture. The carbon mass balance study confirmed that benzene and toluene were completely mineralized to CO₂ and H₂O without producing any identifiable intermediate metabolites.     

Characterization of the <Emphasis Type="Italic">codY</Emphasis> gene and its influence on biofilm formation in <Emphasis Type="Italic">Bacillus </Emphasis><Emphasis Type="Italic">cereus</Emphasis>

The foodborne pathogen Bacillus cereus can form biofilms on various food contact surfaces, leading to contamination of food products. To study the mechanisms of biofilm formation by B. cereus, a Tn5401 library was generated from strain UW101C. Eight thousand mutants were screened in EPS, a low nutrient medium. One mutant (M124), with a disruption in codY, developed fourfold less biofilm than the wild-type, and its defective biofilm phenotype was rescued by complementation. Addition of 0.1% casamino acids to EPS prolonged the duration of biofilms in the wild-type but not codY mutant. When decoyinine, a GTP synthesis inhibitor, was added to EPS, biofilm formation was decreased in the wild-type but not the mutant. The codY mutant produced three times higher protease activity than the wild-type. Zymogram and SDS-PAGE data showed that production of the protease (∼130 kDa) was repressed by CodY. Addition of proteinase K to EPS decreased biofilm formation by the wild-type. Using a dpp-lacZ fusion reporter system, it was shown that that the B. cereus CodY can sense amino acids and GTP levels. These data suggest that by responding to amino acids and intracellular GTP levels CodY represses production of an unknown protease and is involved in biofilm formation.     

Role of Arabidopsis <Emphasis Type="Italic">ABF1</Emphasis>/<Emphasis Type="Italic">3</Emphasis>/<Emphasis Type="Italic">4</Emphasis> during <Emphasis Type="Italic">det1</Emphasis> germination in salt and osmotic stress conditions

Key message

Arabidopsis det1 mutants exhibit salt and osmotic stress resistant germination. This phenotype requires HY5, ABF1, ABF3, and ABF4.

Abstract

While DE-ETIOLATED 1 (DET1) is well known as a negative regulator of light development, here we describe how det1 mutants also exhibit altered responses to salt and osmotic stress, specifically salt and mannitol resistant germination. LONG HYPOCOTYL 5 (HY5) positively regulates both light and abscisic acid (ABA) signalling. We found that hy5 suppressed the det1 salt and mannitol resistant germination phenotype, thus, det1 stress resistant germination requires HY5. We then queried publically available microarray datasets to identify genes downstream of HY5 that were differentially expressed in det1 mutants. Our analysis revealed that ABA regulated genes, including ABA RESPONSIVE ELEMENT BINDING FACTOR 3 (ABF3), are downregulated in det1 seedlings. We found that ABF3 is induced by salt in wildtype seeds, while homologues ABF4 and ABF1 are repressed, and all three genes are underexpressed in det1 seeds. We then investigated the role of ABF3, ABF4, and ABF1 in det1 phenotypes. Double mutant analysis showed that abf3, abf4, and abf1 all suppress the det1 salt/osmotic stress resistant germination phenotype. In addition, abf1 suppressed det1 rapid water loss and open stomata phenotypes. Thus interactions between ABF genes contribute to det1 salt/osmotic stress response phenotypes.

     

Cloning of the <Emphasis Type="Italic">Arthrobacter</Emphasis> sp. FG1 dehalogenase genes and construction of hybrid pathways in <Emphasis Type="Italic">Pseudomonas putida</Emphasis> strains

An Arthrobacter strain, able to utilize 4-chlorobenzoic acid as the sole carbon and energy source, was isolated and characterized. The first step of the catabolic pathway was found to proceed via a hydrolytic dehalogenation that leads to the formation of 4-hydroxybenzoic acid. The dehalogenase encoding genes (fcb) were sequenced and found highly homologous to and organized as those of other 4-chlorobenzoic acid degrading Arthrobacter strains. The fcb genes were cloned and successfully expressed in the heterologous host Pseudomonas putida PaW340 and P. putida KT2442 upper TOL, which acquired the ability to grow on 4-chlorobenzoic acid and 4-chlorotoluene, respectively. The cloned dehalogenase displayed a high specificity for para-substituted haloaromatics with affinity Cl > Br > I > F, in the order.     

Dynamics of <Emphasis Type="Italic">Pseudomonas putida</Emphasis> biofilms in an upscale experimental framework

Exploitation of biofilms for industrial processes requires them to adopt suitable physical structures for rendering them efficient and predictable. While hydrodynamics could be used to control material features of biofilms of the platform strain Pseudomonas putida KT2440 there is a dearth of experimental data on surface-associated growth behavior in such settings. Millimeter scale biofilm patterns formed by its parental strain P. putida mt-2 under different Reynolds numbers (Re) within laminar regime were analyzed using an upscale experimental continuous cultivation assembly. A tile-scan image acquisition process combined with a customized image analysis revealed patterns of dense heterogeneous structures at Re = 1000, but mostly flattened coverings sparsely patched for Re < 400. These results not only fix the somewhat narrow hydrodynamic regime under which P. putida cells form stable coatings on surfaces destined for large-scale processes, but also provide useful sets of parameters for engineering catalytic biofilms based on this important bacterium as a cell factory.     

Revision of the <Emphasis Type="Italic">Serrulati</Emphasis> species of <Emphasis Type="Italic">Penstemon</Emphasis> section <Emphasis Type="Italic">Saccanthera</Emphasis> subsection <Emphasis Type="Italic">Serrulati</Emphasis>

A revision of Penstemon sect. Saccanthera subsect. Serrulati includes a new species (P. salmonensis), a new variety (P. triphyllus var. infernalis), and the elevation of a subspecies to species (P. curtiflorus), bringing the total number of species to eight, which are keyed and described, complete with nomenclature and type citations.