Analysis of spacer regions derived from intramolecular recombination between heterologous loxP sites

In Cre-loxP recombination system, Cre recombinase binds cooperatively to two 13bp inverted repeats in a 34bp loxP and catalyzes strand exchange in the 8bp spacer region. Up to date, spacer sequences within the recombined loxP sites derived from two loxP sties that have different 8bp spacer regions have never been analyzed. In the present study, we analyzed the spacer sequences within the recombined products, resulted from intramolecular recombination between heterologous loxP sites including M2, M3, M7, M11, and 2272 in vivo and in vitro. From the analyses, it was found that loxP sites with aberrant 8bp spacers can be generated from Cre-mediated recombination between heterologous loxP sites at significantly high frequency, proposing the possibility that recombination between heterologous loxP sites would have not undergone typical formula of Cre-loxP recombination.     

Bacteriophage P1 Cre-loxP site-specific recombination. Site-specific DNA topoisomerase activity of the Cre recombination protein

Site-specific recombination in bacteriophage P1 occurs between two loxP sites in the presence of the Cre recombination protein. The structure of the 34-base pair loxP site consists of two 13-base pair inverted repeats separated by an 8-base pair spacer region. A mutation in the loxP site has been constructed which deletes one of the internal bases of the spacer region at the axis of dyad symmetry. This mutant loxP site shows a 10-fold reduction in recombination activity with a wild-type site both in vivo and in vitro. This low level of intramolecular recombination between a wild-type loxP site and the mutant loxP501 site is observed in vitro only when the DNA substrate is supercoiled. The majority of the supercoiled substrate is relaxed by the Cre protein, and on longer incubations, single-stranded nicks accumulate in the DNA. We have determined that these nicks occur in both the wild-type and the mutant sites. The positions of these nicks correspond to the positions of cleavage found during recombination of two wild-type sites, suggesting that the Cre protein is attempting to carry out recombination with the mutant site but most of the time this reaction is abortive. We have determined that the Cre protein relaxes a supercoiled topoisomer of a DNA substrate containing one wild-type site and one mutant site to yield a distribution of topoisomers whose linking numbers differ by steps of one, indicating that Cre can act as a type I topoisomerase.     

Mechanism of strand cleavage and exchange in the Cre-lox site-specific recombination system

The bacteriophage P1 recombinase Cre mediates site-specific recombination between loxP sites. The loxP site consists of two 13 base-pair inverted repeats separated by an eight base-pair spacer region. When DNA containing the loxP site is incubated with Cre, specific cleavages occur within the spacer region, creating a six base-pair staggered cut. The cuts are centered on the axis of dyad symmetry of the loxP site, resulting in a 5' protruding terminus: 5' A decreases T-G-T-A-T-G C 3' T A-C-A-T-A-C increases G. At the point of cleavage, Cre becomes covalently attached to a 3' PO4, and produces a free 5' OH. A series of experiments were carried out in which a radioactively labeled loxP site is recombined with an unlabeled loxP site to locate the point at which strand exchange takes place during recombination. The points of strand exchange coincide with the sites at which Cre cleavage of the DNA backbone had been detected.     

Linking-number changes in the DNA substrate during Cre-mediated loxP site-specific recombination

We have examined the linking-number changes that occur during phage P1 Cre-mediated recombination in vitro between two loxP sites. Such recombination reactions can be divided into three types: intramolecular inversion, in which recombination occurs between two loxP sites in opposite orientations on the same DNA substrate; intramolecular excision, where recombination occurs between two loxP sites that are in the same orientation on the DNA substrate; and intermolecular recombination, which occurs between two loxP sites on separate DNA molecules. Our results indicate that inversion changes the linking number of the substrate DNA by two topological turns. With a negatively supercoiled substrate, the product is changed by +2 turns. A relaxed substrate yields products that have been changed by either +2 or -2 turns. For intermolecular reactions, the sum of the linking numbers of each of the two starting circles is equal to the linking number of the dimer circle generated by recombination, and no change occurs in linking number. For intramolecular excision reactions, the data are most consistent, with no change in linking number during recombination. These results are discussed in terms of models for alignment and synapsis of the recombining sites and the mechanism of strand exchange.     

Directionality in FLP protein-promoted site-specific recombination is mediated by DNA-DNA pairing

The 2 mu plasmid of the yeast Saccharomyces cerevisiae encodes a site-specific recombination system consisting of plasmid-encoded FLP protein and two recombination sites on the plasmid. The recombination site possesses a specific orientation, which is determined by an asymmetric 8-base pair spacer sequence separating two 13-base pair inverted repeats. The outcome or directionality of site-specific recombination is defined by the alignment of two sites in the same orientation during the reaction. Sites containing point mutations or 1-base pair insertions or deletions within the spacer generally undergo recombination with unaltered sites at reduced levels. In contrast, recombination between the two identical mutant sites (where homology is restored) proceeds efficiently in all cases. Sites containing spacer sequences of 10 base pairs or more are nonfunctional under all conditions. A recombination site in which 5 base pairs are changed to yield an entirely symmetrical spacer sequence again recombines efficiently, but only with an identical site. This reaction, in addition, produces a variety of new products which can only result from random alignment of the two sites undergoing recombination, i.e. the reaction no longer exhibits directionality. These and other results demonstrate that both the efficiency and directionality of site-specific recombination is dependent upon homology between spacer sequences of the two recombining sites. This further implies that critical DNA-DNA interactions between the spacer region of the two sites involved in the reaction occur at some stage during site-specific recombination in this system. The specific spacer sequence itself appears to be unimportant as long as homology is maintained; thus, these sequences are probably not involved in recognition by FLP protein.     

Multiplex Cre/lox recombination permits selective site-specific DNA targeting to both a natural and an engineered site in the yeast genome.

Variant lox sites having an altered spacer region (heterospecific lox sites) are not proficient for Cre-mediated recombination with the canonical 34 bp loxP site, but can recombine with each other. By placing different heterospecific lox sites at different genomic locations, Cre can catalyze independent DNA recombination events at multiple loci in the same cell without concern that unwanted inter-locus recombination events will be generated. Such heterospecific lox sites also allow Cre to specifically target efficient integration of exogenous DNA to endogenous lox-like sequences that naturally occur in the genome. Specific targeting occurs only with a DNA vector carrying a heterospecific lox site in which the spacer region has been redesigned to match the 'spacer' region of the targeted chromosomal element. Moreover, in cells expressing a catalytically active Cre recombinase, naturally occurring lox-like sequences can exhibit almost 20% mitotic recombination. Thus, in the same cell, heterospecific lox sites can be used independently at multiple loci for integration, for deletion and for enhanced mitotic recombination, thereby increasing the repertoire of genomic manipulations catalyzed by the Cre recombinase.     

Studies on the properties of P1 site-specific recombination: evidence for topologically unlinked products following recombination

Bacteriophage P1 encodes its own site-specific recombination system consisting of a site at which recombination takes place called loxP and a recombinase called Cre. A number of lambda and plasmid substrates containing two loxP sites have been constructed. Using these substrates we have shown both in vivo and in vitro that a fully functional loxP site is composed of no more than 60 bp. In vitro, when an extract containing Cre is used, recombination between loxP sites on supercoiled, nicked-circle or linear DNA occurs efficiently. The most surprising result from the in vitro studies is that 50% of the products of recombination between loxP sites on a supercoiled DNA substrate are present as free supercoiled circles. The ability to produce free products starting with a supercoiled substrate suggests a rather unique property of Cre-mediated lox recombination, the implications of which are discussed in terms of possible effects of the protein on the topology of the DNA molecule.     

Phage P1 Cre-loxP site-specific recombination. Effects of DNA supercoiling on catenation and knotting of recombinant products

Bacteriophage P1 contains a site-specific recombination system consisting of a site, loxP, and a recombinase protein Cre. We have shown that with purified Cre protein we can carry out recombination between two loxP sites in vitro. When that recombination occurs between two sites in direct orientation on the same DNA molecule, we observed the production of free and catenated circular molecules. In this paper we show that recombination between sites in opposite orientation leads to both knotted and unknotted circular products. We also demonstrate that the production of catenanes and knots is influenced by two factors: (1) supercoiling in the DNA substrate, supercoiled DNA substrates yield significantly more catenated and knotted products than nicked circular substrates; and (2) mutations in the loxP site, a class of mutations have been isolated that carry out recombination but result in a distribution of products in which the ratio of catenanes to free circles is increased over that observed with a wild-type site. A more detailed analysis of the products from recombination between wild-type sites indicates: (1) that the catenanes or knots produced by recombination are both simple and complex; (2) that the ratio of free products to catenanes is independent of the distance between the two directly repeated loxP sites; and (3) that for DNA substrates with four loxP sites significant recombination between non-adjacent sites occurs to give free circular products. These observations provide insights into how two loxP sites are brought together during recombination.     

Interaction of the FLP recombinase of the Saccharomyces cerevisiae 2 micron plasmid with mutated target sequences.

The 2 micron plasmid of Saccharomyces cerevisiae codes for a site-specific recombinase, the FLP protein, that catalyzes efficient recombination across two 599-base-pair (bp) inverted repeats of the plasmid DNA both in vivo and in vitro. We analyzed the interaction of the purified FLP protein with the target sequences of two point mutants that exhibit impaired FLP-mediated recombination in vivo. One mutation lies in one of the 13-bp repeat elements that had been previously shown to be protected from DNase digestion by the FLP protein. This mutation dramatically reduces FLP-mediated recombination in vitro and appears to act by reducing the binding of FLP protein to its target sequence. The second mutation lies within the 8-bp core region of the FLP target sequence. The FLP protein introduces staggered nicks surrounding this 8-bp region, and these nicks are thought to define the sites of strand exchange. The mutation in the core region abolishes recombination with a wild-type site. However, recombination between two mutated sites is very efficient. This result suggests that proper base pairing between the two recombining sites is an important feature of FLP-mediated recombination.     

Chemical probe and missing nucleoside analysis of Flp recombinase bound to the recombination target sequence.

The Flp protein catalyzes a site-specific recombination reaction between two 47 bp DNA sites without the assistance of any other protein or cofactor. The Flp recognition target (FRT) site consists of three nearly identical sequences, two of which are separated by an 8 bp spacer sequence. In order to gain insight into this remarkable protein-DNA interaction we used a variety of chemical probe methods and the missing nucleoside experiment to examine Flp binding. Hydroxyl radical footprints of Flp bound to a recombinationally-competent site fall on opposite faces of canonical B-DNA. The 8 bp spacer region between the two Flp binding sites becomes reactive towards 5-phenyl-1,10-phenanthroline.copper upon Flp binding, indicating that once bound by Flp, this segment of DNA is not in the B-form. Missing nucleoside analysis reveals that within each binding site the presence of two nucleosides on the top strand and four on the bottom, are required for formation of a fully-occupied FRT site. In contrast, loss of any nucleoside in the three binding sites in the FRT interferes with formation of lower-occupancy complexes. DNA molecules with gaps in the 8 bp spacer region are over-represented in complexes with either two or three binding sites occupied by Flp, evidence that DNA flexibility facilitates the cooperative interaction of Flp protomers bound to a recombinationally-active site.     

Specific contacts between the FLP protein of the yeast 2-micron plasmid and its recombination site

Contact points between the FLP protein of the yeast 2-micron plasmid and its recombination site have been defined. Important features of the region previously defined as the minimal recombination site in vitro include a pair of 13-base pair inverted repeats separated by an 8-base pair spacer. The two FLP protein-binding sites within this region are 12 base pairs in length. In each case they include the internal 11 base pairs of one of the 13-base pair repeats, as well as the adjacent base pair within the spacer. The internal 6 base pairs within the spacer are not involved in binding or recognition by FLP protein. When the size of the spacer is increased or decreased by one base pair, the distance between the cleavage points is also increased or decreased correspondingly by one base pair. Points of cleavage are unaffected by changes in the spacer sequence. Specific contact points involving purine residues, identified by methylation protection and recombination interference experiments, are located in both the major and minor grooves of the DNA. Additional contact points between FLP protein and phosphate groups in the phosphate-deoxyribose backbone are clustered near the cleavage sites.     

Cre induces an asymmetric DNA bend in its target loxP site

Cre initiates recombination by preferentially exchanging the bottom strands of the loxP site to form a Holliday intermediate, which is then resolved on the top strands. We previously found that the scissile AT and GC base pairs immediately 5' to the scissile phosphodiester bonds are critical in determining this order of strand exchange. We report here that the scissile base pairs also influence the Cre-induced DNA bends, the position of which correlates with the initial site of strand exchange. The binding of one Cre molecule to a loxP site induces a approximately 35 degrees asymmetric bend adjacent to the scissile GC base pair. The binding of two Cre molecules to a loxP site induces a approximately 55 degrees asymmetric bend near the center of the spacer region with a slight bias toward the scissile A. Lys-86, which contacts the scissile nucleotides, is important for establishing the bend near the scissile GC base pair when one Cre molecule is bound but has little role in positioning the bend when two Cre molecules are bound to a loxP site. We present a model relating the position of the Cre-induced bends to the order of strand exchange in the Cre-catalyzed recombination reaction.     

A new type of illegitimate recombination is dependent on restriction and homologous interaction.

Illegitimate (nonhomologous) recombination requires little or no sequence homology between recombining DNAs and has been regarded as being a process distinct from homologous recombination, which requires a long stretch of homology between recombining DNAs. Under special conditions in Escherichia coli, we have found a new type of illegitimate recombination that requires an interaction between homologous DNA sequences. It was detected when a plasmid that carried 2-kb-long inverted repeats was subjected to type II restriction in vitro and type I (EcoKI) restriction in vivo within a delta rac recBC recG ruvC strain. Removal of one of the repeats or its replacement with heterologous DNA resulted in a reduction in the level of recombination. The recombining sites themselves shared, at most, a few base pairs of homology. Many of the recombination events joined a site in one of the repeats with a site in another repeat. In two of the products, one of the recombining sites was at the end of one of the repeats. Removal of one of the EcoKI sites resulted in decreased recombination. We discuss the possibility that some structure made by homologous interaction between the long repeats is used by the EcoKI restriction enzyme to promote illegitimate recombination. The possible roles and consequences of this type of homologous interaction are discussed.     

Topological selectivity of a hybrid site-specific recombination system with elements from Tn3 res/resolvase and bacteriophage P1 loxP/Cre.

In order to investigate the functions of the parts of the Tn 3 recombination site res, we created hybrid recombination sites by placing the loxP site for Cre recombinase adjacent to the "accessory" resolvase-binding sites II and III of res. The efficiency and product topology of in vitro recombination by Cre between two of these hybrid sites were affected by the addition of Tn 3 resolvase. The effects of resolvase addition were dependent on the relative orientation and spacing of the elements of the hybrid sites. Substrates with sites II and III of res close to loxP gave specific catenated or knotted products (four-noded catenane, three-noded knot) when resolvase and Cre were added together. The product topological complexity increased when the length of the spacer DNA segment between loxP and res site II was increased. Similar resolvase-induced effects on Cre recombination product topology were observed in reactions of substrates with loxP sites adjacent to full res sites. The results demonstrate that the res accessory sites are sufficient to impose topological selectivity on recombination, and imply that intertwining of two sets of accessory sites defines the simple catenane product topology in normal resolvase-mediated recombination. They are also consistent with current models for the mechanism of catalysis by Cre.     

Bacteriophage P1 site-specific recombination. Purification and properties of the Cre recombinase protein

Bacteriophage P1 encodes a site-specific recombination system that consists of a site (loxP) at which recombination occurs and a gene, cre, whose protein product is essential for recombination. The loxP-Cre recombination event can be studied in greater detail by the use of an in vitro system that efficiently carries out recombination between two loxP sites. This paper presents a purification and characterization of the Cre protein (Mr = 35,000), which is the only protein required for the in vitro reaction. No high energy cofactors are needed. The purified Cre protein binds to loxP-containing DNA and makes complexes that are resistant to heparin. Cre efficiently converts 70% of the DNA substrate to products and appears to act stoichiometrically. The action of Cre on a loxP2 supercoiled substrate containing two directly repeated loxP sites results in product molecules that are topologically unlinked. Several models to account for the ability of Cre to produce free supercoiled products are discussed.     

Preferential synapsis of loxP sites drives ordered strand exchange in Cre-loxP site-specific recombination

The bacteriophage P1 Cre recombinase catalyzes site-specific recombination between 34-base-pair loxP sequences in a variety of topological contexts. This reaction is widely used to manipulate DNA molecules in applications ranging from benchtop cloning to genome modifications in transgenic animals. Despite the simple, highly symmetric nature of the Cre-loxP system, there is strong evidence that the reaction is asymmetric; the 'bottom' strands in the recombining loxP sites are preferentially exchanged before the 'top' strands. Here, we address the mechanistic basis for ordered strand exchange in the Cre-loxP recombination pathway. Using suicide substrates containing 5'-bridging phosphorothioate linkages at both cleavage sites, fluorescence resonance energy transfer between synapsed loxP sites and a Cre mutant that can cleave the bridging phosphorothioate linkage but not a normal phosphodiester linkage, we showed that preferential formation of a specific synaptic complex between loxP sites imposes ordered strand exchange during recombination and that synapsis stimulates cleavage of loxP sites.     

Mutational analysis of loxP sites for efficient Cre-mediated insertion into genomic DNA

The Cre/loxP system has been used in transgenic models primarily to excise DNA flanked by loxP sites for gene deletion. However, the insertion reaction is more difficult to control since the excision event is kinetically favored. Mutant loxP sites favoring integration were identified using a novel, bacterial screening system. Utilizing lambda integrase, mutant loxP sites were placed at the E. coli attB site and the excision-insertion ratios of incoming DNA plasmids carrying a second, complementary mutant loxP site were determined. Comparison of 50 mutant loxP sites combinations to the native loxP site revealed that mutations to the inner 6 bp of the Cre binding domain severely inhibited recombination, while those in the outer 8 bps were more tolerated. The most efficient loxP combinations resulted in 1421-fold and 1529-fold increases in relative integration rates over wild-type loxP sites. These loxP mutants could be exploited for site-directed "tag and insert" recombination experiments.     

Determinants of product topology in a hybrid Cre-Tn3 resolvase site-specific recombination system

Many natural DNA site-specific recombination systems achieve directionality and/or selectivity by making recombinants with a specific DNA topology. This property requires that the DNA architecture of the synapse and the mechanism of strand exchange are both under strict control. Previously we reported that Tn3 resolvase-mediated synapsis of the accessory binding sites from the Tn3 recombination site res can impose topological selectivity on Cre/loxP recombination. Here, we show that the topology of these reactions is profoundly affected by subtle changes in the hybrid recombination site les. Reversing the orientation of loxP relative to the res accessory sequence, or adding 4 bp to the DNA between loxP and the accessory sequence, can switch between two-noded and four-noded catenane products. By analysing Holliday junction intermediates, we show that the innate bias in the order of strand exchanges at loxP is maintained despite the changes in topology. We conclude that a specific synaptic structure formed by resolvase and the res accessory sequences permits Cre to align the adjoining loxP sites in several distinct ways, and that resolvase-mediated intertwining of the accessory sequences may be less than has been assumed previously.     

Site-specific recombination by the beta protein from the streptococcal plasmid pSM19035: minimal recombination sequences and crossing over site.

The beta recombinase from the broad host range Grampositive plasmid pSM19035 catalyzes intramolecular site-specific recombination between two directly or inversely oriented recombination sites in the presence of a chromatin-associated protein (Hbsu). The recombination site had been localized to a 447 bp DNA segment from pSM19035. This segment includes a 90 bp region that contains two adjacent binding sites (I and II) for beta protein dimers. Using in vitro recombination assays, we show that this 90 bp region is necessary and sufficient for beta protein-mediated recombination; this defines the six site as the region required for beta protein binding. The point of crossing over has been localized to the center of site I. Hbsu has a strong binding affinity for an unknown site located within the 447 bp segment containing the six site. We discuss the possibility that Hbsu recognizes an altered DNA structure, rather than a specific sequence, generated in the synaptic complex.     

Altered directionality in the Cre-LoxP site-specific recombination pathway

The site-specific recombinase Cre must employ control mechanisms to impose directionality on recombination. When two recombination sites (locus of crossing over in phage P1, loxP) are placed as direct repeats on the same DNA molecule, collision between loxP-bound Cre dimers leads to excision of intervening DNA. If two sites are placed as inverted repeats, the intervening segment is flipped around. Cre catalyzes these reactions in the absence of protein co-factors. Current models suggest that directionality is controlled at two steps in the recombination pathway: the juxtaposition of loxP sites and the single-strand-transfer reactions within the synaptic complex. Here, we show that in Escherichia coli strain 294-Cre, directionality for recombination is altered when the expression of Cre is increased. This leads to deletion instead of inversion on substrates carrying two loxP sites as inverted repeats. The nucleotide sequence composition of loxP sites remaining in aberrant products indicates that site alignment and/or DNA strand transfer in the in vivo Cre-loxP recombination pathway are not always tightly controlled.