Presence of STRA-STRB linked streptomycin-resistance genes in clinical isolate of Escherichia coil 2418

The streptomycin resistance of Escherichia coli 2418 strain has been shown to be associated with a 1.2-kb DNA fragment found in the naturally occurring plasmid R2418S. Here, nucleotide sequence analysis of the 1.2-kb DNA fragment revealed the presence of the strB gene which is located immediately downstream of the strA gene. Both sequences are identical to those of strA and strB genes in plasmid RSF1010. Thus, the observed resistance in the clinical isolate is due to the presence of strA-strB genes encoding streptomycin-modifying enzymes. The sequence downstream of strB gene showed a perfect homology with that of RSF1010. In addition, it contained the right inverted repeat of the transposon Tn5393 that has been suggested to be a relic of this transposon found in DNA plasmids isolated from human- and animal-associated bacteria.     

Two mechanisms necessary for the stable inheritance of plasmid RP4

Plasmid RP4 is stably maintained in strains of Escherichia coli and other Gram-negative bacteria. Inactivation of the plasmid primase gene (pri) or removal of the PstIC fragment gave RP4 derivatives that are slightly unstably maintained in E. coli. Removal of the Tn 1 multimer resolution system (res and tnpR) did not lead to any detectable plasmid loss. Removal of all three of these regions, however, gave rise to pNJ5000 which is lost at high frequency. We have dissected the mechanisms causing this phenomenon. In contrast to RP4, pNJ5000 accumulates significantly as plasmid multimers in a Rec+ host; in a recA host, multimers are not seen and the plasmid is stably maintained. Multimers therefore appear to form by recA-mediated homologous recombination and cause plasmid instability, perhaps by interfering with partition. We demonstrate a mechanism provided by the PstIC fragment which acts on multimers analogously to the Tn1/3 resolution system on plasmid cointegrates, being effective only when cloned in cis. The loss of pri, on the other hand, can be complemented in trans. Our results are consistent with the view that primase prevents multimers forming (rather than resolving them once formed), perhaps by binding specifically to single-stranded regions of the plasmid and preventing homologous pairing.     

Construction of a long hairpin RNA expression library using Cre recombinase

A large number of genome-wide screens using RNA interference (RNAi) libraries have been utilized to determine the function of individual gene products involved in a variety of biological processes. In this study, we describe a new method to enzymatically generate a long hairpin RNA (lhRNA) expression library from a cDNA plasmid library using a nicking endonuclease, BcaBEST DNA polymerase, and Cre recombinase without excising the inserted DNA fragment from the plasmid vector. This method involves 5 steps: (1) conversion of an inserted DNA fragment in a plasmid into a direct repeat (DR); (2) purification of the plasmid containing the DR; (3) subcloning a lox71 cassette into the plasmid; (4) conversion of the DR in the plasmid into an inverted repeat (IR) using Cre recombinase; and (5) purification of the plasmid containing the IR. We also established an efficient method for inserting DNase I-digested DNA fragments into expression plasmids to enable construction of a cDNA plasmid library suitable as source materials to construct the lhRNA expression library. We confirmed that each of the lhRNA expression plasmids constructed using this method induced strong RNAi in a silkworm cell line, NIAS-Bm-oyanagi2.     

Characterization of the minimal origin required for replication of the streptococcal plasmid plP501 in Bacillus subtilis

By using deletional analysis the origin of replication, oriR, of the streptococcal plasmid pIP501 in Bacillus subtilis has been mapped at a position immediately downstream of the repR gene. Determination of both the right and left border of oriR allowed the definition of a sequence of a maximum of 52 nucleotides which theoretically constitutes the minimal origin of replication. Recently, the start point of leading-strand synthesis of the closely related plasmid pAM beta 1 has been mapped at a position which is located exactly in the middle of this sequence (Bruand et al., 1991). The function of oriR did not depend on its location downstream of the repR gene. Translocation of oriR-containing fragments to other regions of the plasmid proved to be possible. The smallest translocated fragment that still reconstituted autonomous replication was 72bp in size. This fragment was also active in directing the replication of an Escherichia coli plasmid in B. subtilis when the RepR protein was supplied in trans from a repR gene integrated into the host chromosome. The transformation efficiency of plasmids carrying translocated oriR fragments showed a certain dependence on the fragment length and orientation. The DNA sequence of oriR included an inverted repeat, both branches of which appeared to be essential for oriR function. The repeats of oriR shared sequence similarity with a repeat located upstream of promoter pII, which has been suggested to be involved in autoregulation of repR expression.     

A Bacillus thuringiensis subsp. israelensis gene encoding a 125-kilodalton larvicidal polypeptide is associated with inverted repeat sequences.

A gene encoding a 125-kilodalton (kDa) mosquitocidal delta-endotoxin was cloned from the 72-MDa resident plasmid of Bacillus thuringiensis subsp. israelensis. This gene is similar in its 3' region to the gene encoding the 135-kDa protein previously cloned (C. Bourgouin, A. Klier, and G. Rapoport, Mol. Gen. Genet. 205:390-397, 1986). Escherichia coli recombinant clones harboring the 125-kDa gene were toxic to larvae of the three mosquito species Aedes aegypti, Anopheles stephensi, and Culex pipiens. In addition, the B. thuringiensis subsp. israelensis DNA fragment carrying the 125-kDa protein gene contains two sets of inverted repeat sequences, identified either by the S1 nuclease method or by electron microscopic observation. The structural organization of inverted repeat sequences and of the 125-kDa gene was analyzed and suggests that this B. thuringiensis subsp. israelensis delta-endotoxin gene is located within a transposable element.     

Development of an acid-soluble assay for measuring retrovirus integrase 3'-OH terminal nuclease activity

A quantitative and efficient assay was developed to measure the 3'-OH terminal DNA endonuclease activity of the avian myeloblastosis virus (AMV) integrase protein. A retroviral-like linearized plasmid containing long terminal repeat (LTR) sequences at its recessed 3'-OH termini was filled in and labeled with the Escherichia coli Klenow DNA polymerase fragment. The 32P-labeled nucleotide was located at the penultimate position. The labeled linearized plasmid or restriction fragments derived from it were incubated with AMV IN and release of the label was quantitated by conversion to acid-soluble counts. The structure of the released product was characterized on 23% sequencing gels. Results indicate that AMV integration protein is functioning as an endonuclease releasing a dinucleotide and that the activity is stoichiometric with a preference for the cleavage of the U3 LTR terminus over that of the U5 LTR terminus.     

Automatic elimination of unnecessary bacterial sequences from yeast vectors.

Most vectors for Saccharomyces cerevisiae are shuttle vectors which can be both propagated and selected in Escherichia coli. The DNA segments, however, which are required for propagation in E. coli are unnecessary and moreover toxic in S. cerevisiae. To delete these harmful DNA fragments from the vector after it is introduced into S. cerevisiae cells, we propose a specific gene conversion mechanism of a yeast plasmid, pSR1. Plasmid pSR1 has a pair of inverted repeats (IRs) that divides the plasmid molecule into two unique regions. Intramolecular recombination frequently occurs at a pair of specific recombination sites in IRs catalyzed by recombinase R, encoded by a pSR1 plasmid gene. This R-mediated recombination is often accompanied by gene conversion in IRs. Thus, a 2.1-kb pBR322 sequence for the E. coli host ligated into one of the IRs of a composite plasmid was automatically and effectively eliminated when the plasmid was introduced into S. cerevisiae cells.     

Escherichia coli XerC recombinase is required for chromosomal segregation at cell division

XerC is a site-specific recombinase of the bacteriophage lambda integrase family that is encoded by xerC at 3700 kbp on the genetic map of Escherichia coli. The protein was originally identified through its role in converting multimers of plasmid ColE1 to monomers; only monomers are stably inherited. Here we demonstrate that XerC also has a role in the segregation of replicated chromosomes at cell division. xerC mutants form filaments with aberrant nucleotides that appear unable to partition correctly. A DNA segment (dif) from the replication terminus region of the E. coli chromosome binds XerC and acts as a substrate for XerC-mediated site-specific recombination when inserted into multicopy plasmids. This dif segment contains a region of 28 bp with sequence similarity to the crossover region of ColE1 cer. The cell division phenotype of xerC mutants is suppressed in strains deficient in homologous recombination, suggesting that the role of XerC/dif in chromosomal metabolism is to convert any chromosomal multimers (arising through homologous recombination) to monomers.     

The mobilization and origin of transfer regions of a Thiobacillus ferrooxidans plasmid: relatedness to plasmids RSF1010 and pSC101

The components for the mobilization function of a plasmid DNA during conjugation include a cis-acting sequence (the origin of transfer, oriT) and a transacting sequence coding for mobilization (Mob) proteins. By genetic and deletion analysis, we have located the mobilization region of pTF1, a cryptic plasmid previously isolated from a Thiobacillus ferrooxidans strain. Within a 2797 bse-pair sequenced region, several open reading frames (ORFs) were predicted; two of the ORFs are divergently transcribed and they encode proteins of calculated molecular masses, 42.6kD (ORF2) and 11.4kD (ORF6). Surprisingly, these protein sequences are substantially similar to two of the previously characterized mobilization proteins of the Escherichia coli IncQ plasmid, RSF1010. Moreover, the pTF1 ORF2 (now designated MobL) sequence is also found to be similar to a presumed mobilization protein of plasmid pSC101. Regions of sequence identity of plasmids pTF1, RSF1010 and pSC101 include their oriT sites. By alkaline agarose gel electrophoresis and DNA sequencing, we have established the location of the relaxation complex nick site within the oriT of pTF1. An identical nick site, which is adjacent to a characteristic 10 base-pair inverted repeat sequence, is also found for plasmid RSF1010. A recombinant plasmid containing a 42 base-pair synthetic piece of DNA encompassing the pTF1 inverted repeat and nick sequence was shown to be oriT-active.     

Characterization of the stable maintenance properties of the par region of broad-host-range plasmid RK2.

A 3.2-kb fragment encoding five genes, parCBA/DE, in two divergently transcribed operons promotes stable maintenance of the replicon of the broad-host-range plasmid RK2 in a vector-independent manner in Escherichia coli. The parDE operon has been shown to contribute to stabilization through the postsegregational killing of plasmid-free daughter cells, while the parCBA operon encodes a resolvase, ParA, that mediates the resolution of plasmid multimers through site-specific recombination. To date, evidence indicates that multimer resolution alone does not play a significant role in RK2 stable maintenance by the parCBA operon in E. coli. It has been proposed, instead, that the parCBA region encodes an additional stability mechanism, a partition system, that ensures that each daughter cell receives a plasmid copy at cell division. However, studies carried out to date have not directly determined the plasmid stabilization activity of the parCBA operon alone. An assessment was made of the relative contributions of postsegregational killing (parDE) and the putative partitioning system (parCBA) to the stabilization of mini-RK2 replicons in E. coli. Mini-RK2 replicons carrying either the entire 3.2-kb (parCBA/DE) fragment or the 2.3-kb parCBA region alone were found to be stably maintained in two E. coli strains tested. The stabilization found is not due to resolution of multimers. The stabilizing effectiveness of parCBA was substantially reduced when the plasmid copy number was lowered, as in the case of E. coli cells carrying a temperature-sensitive mini-RK2 replicon grown at a nonpermissive temperature. The presence of the entire 3.2-kb region effectively stabilized the replicon, however, under both low- and high-copy-number-conditions. In those instances of decreased plasmid copy number, the postsegregational killing activity, encoded by parDE, either as part of the 3.2-kb fragment or alone played the major role in the stabilization of mini-RK2 replicons within the growing bacterial population. Our findings indicate that the parCBA operon functions to stabilize by a mechanism other than cell killing and resolution of plasmid multimers, while the parDE operon functions solely to stabilize plasmids by cell killing. The relative contribution of each system to stabilization depends on plasmid copy number and the particular E. coli host.     

A comparative study of the functions of recBCD-nuclease from Escherichia coli and "recombinase", encoded by plasmid R1drd-19]

The RecBCD nuclease of Escherichia coli and "recombinase" determined by R1drd-19 plasmid (the latter is able to replace at least partially the indicated cellular enzyme) were shown to differ from each other in some essential features. The product encoded by the plasmid as distinct from RecBCD nuclease practically is not sensitive to inhibition by GamS protein of the lambda phage. Earlier, it was found that the presence of R1drd-19 plasmid in the recBC cells restores the level of the total ATP-dependent exonuclease activity because of appearance in such cells of a new exonuclease activity also ATP-dependent. The exonuclease activity determined by R1drd-19 plasmid was found to differ from the corresponding activity of the RecBCD enzyme. The plasmid enzyme was able to prevent reproduction of T4g2- mutant on recBC cells. The ability of the plasmid "recombinase" to some stimulation of intrachromosomal recombination in recA mutant witness to incomplete RecA-dependence of its function. No significant homology was registered between Escherichia coli DNA fragment containing the recB, recC, recD genes and the EcoRI-C-fragment of R1drd-19 carrying the sequences responsible for recombination and repair functions of the plasmid.     

Location of the 5.8S rRNA gene of Saccharomyces cerevisiae.

Direct DNA sequence analysis of Saccharomyces cerevisiae ribosomal DNA cloned in an Escherichia coli plasmid revealed part of the structural gene for 5.8S rRNA at one end of a 700-base-pair EcoRI fragment. Taken with the previously established EcoRI restriction map of the ribosomal repeat unit, this sequence establishes that the yeast 5.8S RNA segment is located between the 18S and 28S segments in the 42S rRNA precursor and in the DNA which codes for it.     

The FLP protein of the 2-micron plasmid of yeast. Purification of the protein from Escherichia coli cells expressing the cloned FLP gene

Most laboratory strains of the yeast Saccharomyces cerevisiae contain many copies of an autonomously replicating plasmid called 2-micron circle DNA. This plasmid codes for a site-specific recombinase, the FLP protein which promotes recombination across two 599-base pair inverted repeats of the plasmid DNA. We have cloned the FLP gene under the control of a strong Escherichia coli promoter and have hyperproduced the protein in that organism. Cell-free extracts from this source promote highly efficient site-specific recombination in vitro and we have used this activity to purify the FLP protein substantially. The enzyme acts efficiently on circular and linear substrates and requires only monovalent or divalent cations for activity.     

In vivo cloning of PCR products in E. coli.

This report describes an efficient method to clone PCR products exploiting endogenous Escherichia coli enzymatic activities. PCR products are engineered to contain terminal sequences identical to sequences at the two ends of a linearized vector. PCR products and vector DNA are then simply co-transfected into E. coli strain JC8679, obviating the requirement for enzymatic treatment of the PCR product or in vitro ligation. The high rate of homologous recombination in this strain results in efficient incorporation of the insert into the vector, a process we refer to as in vivo cloning (IVC).     

PY54, a linear plasmid prophage of Yersinia enterocolitica with covalently closed ends

PY54 is a temperate phage isolated from Yersinia enterocolitica. Lysogenic Yersinia strains harbour the PY54 prophage as a plasmid (pY54). The plasmid has the same size (46 kb) as the PY54 genome isolated from phage particles. By electron microscopy, restriction analysis and DNA sequencing, it was demonstrated that the phage and the plasmid DNAs are linear, circularly permuted molecules. Unusually for phages of Gram-negative bacteria, the phage genome has 3'-protruding ends. The linear plasmid pY54 has covalently closed ends forming telomere-like hairpins. The equivalent DNA sequence of the phage genome is a 42 bp perfect palindrome. Downstream from the palindrome, an open reading frame (ORF) was identified that revealed strong DNA homology to the telN gene of Escherichia coli phage N15 encoding a protelomerase. Similar to PY54, the N15 prophage is a linear plasmid with telomeres. The N15 protelomerase has cleaving/joining activity generating the telomeres by processing a 56 bp palindrome (telomere resolution site tel RL). To study the activity of the PY54 protein, the telN-like gene was cloned and expressed in E. coli. A 77 kDa protein was obtained and partially purified. The protein was found to process recombinant plasmids containing the 42 bp palindrome. Telomere resolution of plasmids under in vivo conditions was also investigated in Yersinia infected with PY54. Processing required a plasmid containing the palindrome as well as adjacent DNA sequences from the phage including an additional inverted repeat. Regions on the phage genome important for plasmid maintenance were defined by the construction of linear and circular miniplasmid derivatives of pY54, of which the smallest miniplasmid comprises a 4.5 kb DNA fragment of the plasmid prophage.     

Plasmid inverted repeats provide for duplication or precise excision of DNA inserts

A plasmid containing inverted repeats is constructed in Bacillus subtilis. Insertion of DNA fragments into the plasmid inverted repeats results either in the precise excision of the insert or in its duplication in the opposite inverted repeat. These rearrangements are due to the presence of inverted repeats only. Two recombination events are possibly responsible for these phenomena. During the first step of the recombination two plasmid monomers form a dimer molecule. During the second step the intramolecular recombination between the direct repeats in the dimer structure leads to the formation of two rearranged plasmid monomers devoid of insertion or containing two DNA inserts. Proposed dimeric intermediate is unstable in B. subtilis. However, it is isolated from Escherichia coli recA, cells. Plasmids containing the inverted repeats can serve as a model to study plasmid recombination in B. subtilis cells.     

Isolation of a novel transposon which carries the Escherichia coli enterotoxin STII gene.

The Escherichia coli heat-stable enterotoxin STII gene in P307 is flanked by inverted repeat sequences, suggesting that the STII gene is part of a transposon. To study the transposability, a DNA fragment containing the putative STII transposon has been cloned. Results of transposition assays indicated that the STII gene can transpose from one plasmid to another. The size of the transposon has been determined to be approximately 9 kilobases. The structure and the location of the STII gene in clinical isolates of Escherichia coli have been investigated by restriction enzyme analyses. The structural genes of STII from different clinical isolates appear to be uniform in size, but the flanking sequences are heterogeneous. This result suggests that the STII genes in different isolates are not on the same transposon as observed in P307.     

Identification of a sequence containing the positive regulatory region of Saccharomyces cerevisiae gene ENO1

A DNA fragment which contains the 5'-flanking region of the Saccharomyces cerevisiae enolase 1 gene (ENO1) and a portion of the coding sequence was cloned in a plasmid pMC1587. This fragment was fused in frame to the lacZ gene of Escherichia coli. Many mutants which deleted a portion of the 5'-flanking region of ENO1 were isolated from this ENO1-lacZ fusion plasmid by in vitro recombination. Analysis of beta-galactosidase activity of these mutants indicated that the regulatory region responsible for an efficient expression of the ENO1-lacZ fused gene resides within an 86-bp sequence located at -487 to -402 upstream from the start codon of ENO1. We found that the segment encompassing the 86-bp region worked equally well in an inverted orientation, but the tandem duplication of the sequence did not enhance the expression of the fused gene.