Cell-surface display of a Pseudomonas aeruginosa strain K pilin peptide within the paracrystalline S-layer of Caulobacter crescentus

The paracrystalline surface (S)-layer of Caulobacter crescentus is composed of a single secreted protein (RsaA) that interlocks in a hexagonal pattern to completely envelop the bacterium. Using a genetic approach, we inserted a 12 amino acid peptide from Pseudomonas aeruginosa strain K pilin at numerous semirandom positions in RsaA. We then used an immunological screen to identify those sites that presented the inserted pilin peptide on the C. crescentus cell surface as a part of the S-layer. Eleven such sites (widely separated in the primary sequence) were identified, demonstrating for the first time that S-layers can be readily exploited as carrier proteins to display ‘epitope-size’ heterologous peptides on bacterial cell surfaces. Whereas intact RsaA molecules carrying a pilin peptide could always be found on the surface of C. crescentus regardless of the particular insertion site, introduction of the pilin peptide at 9 of the 11 sites resulted in some proteolytic cleavage of RsaA. Two types of proteolytic phenomena were observed. The first was characterized by a single cleavage within the pilin peptide insert with both fragments of the S-layer protein remaining anchored to the outer membrane. The other proteolytic phenomenon was characterized by cleavage of the S-layer protein at a point distant from the site of the pilin peptide insertion. This cleavage always occurred at the same location in RsaA regardless of the particular insertion site, yielding a surface-anchored 26 kDa proteolytic fragment bearing the RsaA N-terminus; the C-terminal cleavage product carrying the pilin peptide was released into the growth medium. When the results of this work were combined with the results of a previous study, the RsaA primary sequence could be divided into three regions with respect to the location of a peptide insertion and its effect on S-layer biogenesis: (i) insertions in the extreme N-terminus of RsaA either produce no apparent effect on S-layer biogenesis or disrupt surface-anchoring of the protein; (ii) insertions in the extreme C-terminus either produce no apparent effect on S-layer biogenesis or disrupt protein secretion; and (iii) insertions more centrally located in the protein either have no apparent effect on S-layer biogenesis or result in proteolytic cleavage of RsaA. These data are discussed in relation to our previous assignment of the RsaA N- and C-terminus as regions that are important for surface anchoring and secretion respectively.     

Sequence of the precursor to rat ornithine aminotransferase deduced from a cDNA clone

The nucleotide sequence of ornithine aminotransferase mRNA from rat liver, including the entire coding and 3' untranslated regions, was determined from two overlapping cDNA clones. The mRNA encodes a precursor polypeptide of 439 amino acid residues with a molecular weight of 48,332. The deduced amino acid composition of the proposed mature enzyme sequence (residues 35 through 439) was in good agreement with that reported for the purified protein. The amino-terminal segment of the precursor corresponding to residues 1 through 34 has an overall positive charge, containing 6 basic residues and only a single acidic residue, and is postulated to be the mitochondrial leader sequence. The first 22 amino acid residues of the proposed leader sequences share 54% homology with the leader peptide of rat ornithine transcarbamylase precursor and more limited homology to the leader peptides of other nuclear-encoded mitochondrial matrix proteins. Homology was also observed between residues 286 through 362 ornithine aminotransferase precursor and a region containing the pyridoxyl phosphate binding domain of mitochondrial aspartate aminotransferase.     

Evaluating secretion and surface attachment of SapA, an S-layer-associated metalloprotease of Caulobacter crescentus

Caulobacter crescentus is used to display foreign peptides at high density as insertions into the surface (S)-layer protein (RsaA). Many recombinant RsaA proteins, however, are cleaved by SapA, a 71-kDa metalloprotease, suggesting a role in maintaining S-layer integrity. When overexpressed on a multicopy plasmid SapA was detected on the surface by fluorescent antibody only if RsaA and the O-side chain of LPS that mediates S-layer attachment were removed by mutation, indicating an outer membrane location beneath the S-layer. Secretion was mediated by the RsaA type 1 transporter since secretion was eliminated in transporter deficient strains or by C-terminal deletions in SapA (the presumed location of type 1 secretion signals). Secretion was required to become an active protease; mass spectrometry suggested this might be due to N-terminal processing during secretion, a feature shared with other type 1-secreted proteases. Overexpression leads to additional processing C-terminal to the protease domain, producing a 45-kDa protein. This was demonstrated to be self-processing. Deletion analysis revealed the C-terminal 100 amino acids were sufficient for anchoring and secretion. When protein G was fused to the last 238 amino acids of SapA it was secreted, surface attached and bound immunoglobulin, indicating potential for foreign protein display.     

Caulobacter crescentus synthesizes an S-layer-editing metalloprotease possessing a domain sharing sequence similarity with its paracrystalline S-layer protein

Strains of Caulobacter crescentus elaborate an S-layer, a two-dimensional protein latticework which covers the cell surface. The S-layer protein (RsaA) is secreted by a type I mechanism (relying on a C-terminal signal) and is unusual among type I secreted proteins because high levels of protein are produced continuously. In efforts to adapt the S-layer for display of foreign peptides and proteins, we noted a proteolytic activity that affected S-layer monomers with foreign inserts. The cleavage was precise, resulting in fragments with an unambiguous N-terminal sequence. We developed an assay to screen for loss of this activity (i.e., presentation of foreign peptides without degradation), using transposon and traditional mutagenesis. A metalloprotease gene designated sap (S-layer-associated protease) was identified which could complement the protease-negative mutants. The N-terminal half of Sap possessed significant similarity to other type I secreted proteases (e.g., alkaline protease of Pseudomonas aeruginosa), including the characteristic RTX repeat sequences, but the C-terminal half which normally includes the type I secretion signal exhibited no such similarity. Instead, there was a region of significant similarity to the N-terminal region of RsaA. We hypothesize that Sap evolved by combining the catalytic portion of a type I secreted protease with an S-layer-like protein, perhaps to associate with nascent S-layer monomers to "scan" for modifications.     

Nucleotide sequence of the gene encoding the two-subunit pilin of Bacteroides nodosus 265.

The nucleotide sequence of the gene encoding pilin from Bacteroides nodosus 265 has been determined. The pilin is encoded by a single-copy gene, from which can be predicted a prepilin comprising a single protein chain of Mr 16,637. The prepilin sequence differs in several respects from the mature protein sequence. Seven additional N-terminal amino acid residues are present in prepilin, whereas residue 8, phenylalanine, undergoes posttranslational modification to become the N-methylated amino-terminal residue of mature pilin. In addition, further processing occurs through internal cleavage to produce two noncovalently linked subunits characteristic of pilins from serogroup H of B. nodosus, of which strain 265 is a member. The position of cleavage has been identified between alanine residues at positions 72 and 73 of the mature 149-residue pilin protein. The predicted pilin sequence of B. nodosus 265 shows extensive N-terminal amino acid sequence homology with other pilins of the N-methylphenylalanine type. In addition this sequence also shows homology with these N-methylphenylalanine-type pilins in the C-terminal region of the molecule, especially with pilin from Pseudomonas aeruginosa PAK.     

The complete amino acid sequence of ribosomal protein S18 from the moderate thermophile Bacillus stearothermophilus

The amino acid sequence of ribosomal protein S18 from Bacillus stearothermophilus has been completely determined by automated sequence analysis of the intact protein as well as of peptides derived from digestion with Staphylococcus aureus protease at pH 4.0 and cleavage with cyanogen bromide. The carboxy-terminal region was verified by both amino acid analyses of chymotryptic peptides and by mass spectrometry from the terminal region. The protein contains 77 amino acid residues and has an Mr of 8838. Comparison of this sequence with the sequences of the S18 proteins from tobacco and liverwort chloroplasts and E. coli shows a relatively high similarity, ranging from 42 to 55% identical residues with the B. stearothermophilus S18 protein. The regions of homology common to all four proteins consist of several positively charged sections spanning the entire length of the protein.     

Two outer membrane proteins are required for maximal type I secretion of the Caulobacter crescentus S-layer protein

Transport of RsaA, the crystalline S-layer subunit protein of Caulobacter crescentus, is mediated by a type I secretion mechanism. Two proteins have been identified that play the role of the outer membrane protein (OMP) component in the RsaA secretion machinery. The genes rsaF(a) and rsaF(b) were identified by similarity to the Escherichia coli hemolysin secretion OMP TolC by using the C. crescentus genome sequence. The rsaF(a) gene is located several kilobases downstream of the other transporter genes, while rsaF(b) is completely unlinked. An rsaF(a) knockout had approximately 56% secretion compared to wild-type levels, while the rsaF(b) knockout reduced secretion levels to approximately 79%. When expression of both proteins was eliminated, there was no RsaA secretion, but a residual level of approximately 9% remained inside the cell, suggesting posttranslational autoregulation. Complementation with either of the individual rsaF genes by use of a multicopy vector, which resulted in 8- to 10-fold overexpression of the proteins, did not restore RsaA secretion to wild-type levels, indicating that both rsaF genes were required for full-level secretion. However, overexpression of rsaF(a) (with normal rsaF(b) levels) in concert with overexpression of rsaA resulted in a 28% increase in RsaA secretion, indicating a potential for significantly increasing expression levels of an already highly expressing type I secretion system. This is the only known example of type I secretion requiring two OMPs to assemble a fully functional system.     

Nucleotide sequence of the gene for the ferrienterochelin receptor FepA in Escherichia coli. Homology among outer membrane receptors that interact with TonB

We have determined the nucleotide sequence of the Escherichia coli fepA gene, which codes for the outer membrane receptor for ferrienterochelin and colicins B and D. The predicted FepA polypeptide has a molecular weight of 79,908 and consists of 723 amino acids. A 22-amino acid leader or signal peptide preceded the mature protein. With respect to overall composition, hydropathy, net charge and distribution of nonpolar segments, the FepA polypeptide was typical of other E. coli outer membrane proteins, except that FepA contained 2 cysteine residues. Comparison of the deduced amino acid sequence of FepA with that of three other TonB-dependent receptors (BtuB, FhuA, and IutA) revealed only a few regions of sequence homology; one of these included the amino-termini. An amino acid substitution within the conserved amino-terminal region of BtuB resulted in production of a receptor that had normal binding functions but was incapable of energy-dependent transport of vitamin B12. This result suggests that the amino-terminal end of these four polypeptides is involved in interaction with the TonB protein or another step of energy transduction. Three other regions of homology were shared among the four proteins: one near residues 50 to 70, another at about residue 100 to 140, and the last between 20 and 40 amino acid residues from the carboxyl terminus. The function of these three regions remains speculative.     

The S-layer of Caulobacter crescentus: three-dimensional image reconstruction and structure analysis by electron microscopy.

The regular surface protein structure (S-layer) of Caulobacter crescentus was analyzed by electron microscopy and three-dimensional image reconstruction to a resolution of 2 nm. Projections showed that the S-layer is an array of ring structures, each composed of six subunits that are arranged on a lattice with p6 symmetry. Three-dimensional reconstructions showed that the ring subunits were approximately rod-shaped structures and were perpendicular to the plane of the array, with a linker arm emanating from approximately the middle of the rod, accounting for the connections between the rings. The calculated subunit mass was ca. 100 kDa, very close to the size of RsaA (the protein known to be at least the predominant species in the S-layer) predicted from the DNA sequence of the rsaA gene. The core region of the rings creates an open pore 2.5 to 3.5 nm in diameter. The size of the gaps between the neighboring unit cells is in the same range, suggesting a uniform porosity predicted to exclude molecules larger than ca. 17 kDa. Attempts to remove membrane material from S-layer preparations with detergents revealed that the structure spontaneously rearranged into a mirror-image double layer. Negative-stain and thin-section electron microscopy examination of colonies of C. crescentus strains with a mutation in a surface molecule involved in the attachment of the S-layer showed that shed RsaA protein organized into large sheets. The sheets in turn organized into stacks that tended to accumulate near the upper surface of the colony. Image reconstruction indicated that these sheets were also precise mirror-image double layers, and thickness measurements obtained from thin sections were consistent with this finding. The sheets were absent when these mutant strains were grown without calcium, supporting other data that calcium is involved in attachment of the S-layer to a surface molecule and perhaps in subunit-subunit interactions. We propose that when the membrane is removed from S-layer fragments by detergents or the attachment-related surface molecule is absent, the attachment sites of the S-layer align precisely to form a double layer via a calcium interaction.     

Secretion of the Caulobacter crescentus S-layer protein: further localization of the C-terminal secretion signal and its use for secretion of recombinant proteins

The secretion signal of the Caulobacter crescentus S-layer protein (RsaA) was localized to the C-terminal 82 amino acids of the molecule. Protein yield studies showed that 336 or 242 C-terminal residues of RsaA mediated secretion of >50 mg of a cellulase passenger protein per liter to the culture fluids.     

Characterization of mutants of Caulobacter crescentus defective in surface attachment of the paracrystalline surface layer.

Strains of Caulobacter crescentus express a paracrystalline surface layer (S-layer) consisting of the protein RsaA. Mutants of C. crescentus NA1000 and CB2, isolated for their ability to grow in the absence of calcium ions, uniformly no longer had the S-layer attached to the cell surface. However, RsaA was still produced, and when colonies grown on calcium-sufficient medium were examined, large two-dimensional arrays of S-layer were found intermixed with the cells. Such arrays were not found in calcium-deficient medium even when high levels of magnesium ions were provided. The arrays could be disrupted with divalent ion chelators and more readily with the calcium-selective ethylene glycol-bis (beta-aminoethyl ether)N,N,N',N'-tetraacetic acid (EGTA). Thus, the outer membrane surface was not needed as a template for self-assembly, but calcium likely was. The cell surface and S-layer gene of assembly-defective mutants of NA1000 were examined to determine the basis of the S-layer surface attachment defect. Mutants had no detectable alteration in the rough lipopolysaccharide (LPS) or a characterized capsular polysaccharide, but another polysaccharide molecule was greatly reduced or absent in all calcium-independent mutants. The molecule was shown to be a smooth LPS with a core sugar and fatty acid complement identical to those of the rough LPS and an O polysaccharide of homogeneous length, tentatively considered to be composed of 4,6-dideoxy-4-amino hexose, 3,6-dideoxy-3-amino hexose, and glycerol in equal proportions. This molecule (termed SLPS) was detectable by surface labeling with a specific antiserum only when the S-layer was not present. The rsaA genes from three calcium-independent mutants were cloned and expressed in an S-layer-negative, SLPS-positive strain. A normal S-layer was produced, ruling out defects in rsaA in these cases. It is proposed that SLPS is required for S-layer surface attachment, possibly via calcium bridging. The data support the possibility that calcium binding is required to prevent an otherwise lethal effect of SLPS. If true, mutations that eliminate the O polysaccharide of SLPS eliminate the lethal effects of calcium-deprived SLPS, at the expense of S-layer attachment.     

Cloning, sequence analysis and expression of a cDNA encoding a novel insulin-like growth factor binding protein (IGFBP-2).

Insulin-like growth factors bind with high affinity to specific binding proteins in extracellular fluids. To identify structural characteristics of IGF-binding proteins that might define their physiological roles, we determined the complete primary structure of a novel human IGF-binding protein (IGFBP-2) from a cloned cDNA. The cDNA encodes a 328 amino acid IGF-binding protein precursor which contains a 39-residue signal peptide. The mature 289 amino acid IGFBP-2 has a predicted Mr of 31,325. Chinese hamster ovary (CHO) cells stably transformed with the IGFBP-2 cDNA secreted a 36 kd protein which bound, with different affinities, IGFII and IGFI, but did not bind insulin. The predicted protein sequence of this IGF-binding protein shares extensive amino acid homology (greater than 85%) with the IGF-binding protein secreted by rat BRL-3A cells, but less than 40% homology with human IGFBP-1. Therefore IGFBP-2, and not IGFBP-1 as previously suggested, represents the human homologue of the rat BRL-BP (alpha IGFBP-2). Moreover, from alignment of the predicted protein sequences of IGFBP-1 and IGFBP-2, extensive conservation of the distribution of cysteine residues is observed. Although the overall amino acid homology shared by these proteins is not high, we suggest that they represent a family of structurally related human IGFBPs. Southern blot analysis of human DNA demonstrates that IGFBP-2 is encoded by a single-copy gene, different from that of IGFBP-1.     

Bacillus megaterium spore protein C-3: nucleotide sequence of its gene and the amino acid sequence at its spore protease cleavage site

The nucleotide sequence of the Bacillus megaterium gene coding for spore-specific protein C-3 has been determined. The gene codes for 65 amino acids and the coding sequence is preceded by an efficient ribosome-binding site. The predicted protein C-3 sequence agrees with both the amino acid composition and the amino terminal sequence of protein C-3, and shows homology (approx. 65 % of all residues are identical) with the sequences of the analogous proteins A and C of B. megaterium. Protein C-3 is cleaved by the sequence-specific B. megaterium spore protease, and the amino acid sequence at the new amino-terminus generated is identical to that predicted from the gene sequence, and homologous to the spore protease cleavage sites in the A and C proteins. The protein C-3 gene also shares a number of features with the previously sequenced protein C gene in both upstream and downstream flanking sequence.     

The nucleotide and partial amino acid sequence of toxic shock syndrome toxin-1

The nucleotide sequence of toxic shock syndrome toxin-1 (TSST-1) has been determined. In addition, one-third of the predicted amino acid sequence was confirmed by amino acid sequence analysis of cyanogen bromide-generated TSST-1 protein fragments. The DNA sequencing results identified a 708-base pair open reading frame starting with an ATG, 7 base pairs downstream from a Shine-Dalgarno sequence, and terminating at a UAA stop codon. Amino acid analysis of the intact protein defined the NH2 terminus of the mature protein and located the cleavage point for the signal peptide (Ala/Ser). The signal peptide contained the first 40 amino acids and had characteristic structural similarities with other bacterial signal peptides. The coding sequence of the mature protein was 585 base pairs (194 amino acids) in length, and the molecular weight of the predicted protein was 22,049. This is in good agreement with the previously reported molecular weight of TSST-1 (22,000), as determined by sodium dodecyl sulfate-polyacrylamide gel electrophoresis. NH2-terminal amino acid sequence analysis performed on isolated TSST-1 CNBr fragments determined the position of the peptides in the TSST-1 sequence and verified the predicted amino acid sequence in those positions. Computer analyses of the amino acid sequence showed that TSST-1 has little or no sequence homology with biologically related toxins, streptococcal pyrogenic exotoxin A, and staphylococcal enterotoxins B and C.     

The Caulobacter crescentus Paracrystalline S-Layer Protein Is Secreted by an ABC Transporter (Type I) Secretion Apparatus

Caulobacter crescentus is a gram-negative bacterium that produces a two-dimensional crystalline array on its surface composed of a single 98-kDa protein, RsaA. Secretion of RsaA to the cell surface relies on an uncleaved C-terminal secretion signal. In this report, we identify two genes encoding components of the RsaA secretion apparatus. These components are part of a type I secretion system involving an ABC transporter protein. These genes, lying immediately 3′ of rsaA, were found by screening a Tn5 transposon library for the loss of RsaA transport and characterizing the transposon-interrupted genes. The two proteins presumably encoded by these genes were found to have significant sequence similarity to ABC transporter and membrane fusion proteins of other type I secretion systems. The greatest sequence similarity was found to the alkaline protease (AprA) transport system of Pseudomonas aeruginosa and the metalloprotease (PrtB) transport system of Erwinia chrysanthemi. The prtB and aprA genes were introduced into C. crescentus, and their products were secreted by the RsaA transport system. Further, defects in the S-layer protein transport system led to the loss of this heterologous secretion. This is the first report of an S-layer protein secreted by a type I secretion apparatus. Unlike other type I secretion systems, the RsaA transport system secretes large amounts of its substrate protein (it is estimated that RsaA accounts for 10 to 12% of the total cell protein). Such levels are expected for bacterial S-layer proteins but are higher than for any other known type I secretion system.     

Cloning and sequence analysis of mRNA for mouse aspartate aminotransferase isoenzymes

The nucleotide sequences of mRNAs for the mouse mitochondrial and cytosolic aspartate aminotransferase isoenzymes (mAspAT and cAspAT) (EC 2.6.1.1) were determined from complementary DNAs. The mAspAT mRNA comprises minimally 2460 nucleotides and codes for a polypeptide of 430 amino acid residues corresponding to the precursor form of the mAspAT (pre-mAspAT). The cAspAT mRNA comprises minimally 2086 nucleotides and codes for a polypeptide of 413 amino acid residues. The region coding for the mature mAspAT and that for the cAspAT show about 53% overall homology. The former shares 49% and the latter 48% of homology, respectively, with that of the Escherichia coli aspC gene, which has been shown to code for the E. coli AspAT (Kuramitsu, S., Okuno, S., Ogawa, T., Ogawa, H., and Kagamiyama, H. (1985) J. Biochem. (Tokyo) 97, 1259-1262). When the deduced amino acid sequence of the mouse pre-mAspAT was compared with that of the pig pre-mAspAT polypeptide, we found that they share a 94% homology and that the mouse pre-mAspAT yields a presequence consisting of 29 amino acid residues and a mature mAspAT, consisting of 401 amino acid residues. These numbers and the amino acid residues present at the putative cleavage site are all in complete agreement in these two species. The deduced amino acid sequence of the mouse cAspAT shares 91% homology with that of the pig cAspAT. Comparisons of the nucleotide and deduced amino acid sequences between the mouse and E. coli AspATs suggest that the mammalian mAspAT gene is more closely related to the E. coli aspC gene than is the mammalian cAspAT gene.     

S-layer protein gene of Acetogenium kivui: cloning and expression in Escherichia coli and determination of the nucleotide sequence.

Acetogenium kivui is anaerobically growing thermophilic bacterium with a gram-positive type of cell wall structure. The outer surface is covered with a hexagonally packed surface (S) layer. The gene coding for the S-layer polypeptide was cloned in Escherichia coli on two overlapping fragments by using the plasmid pUC18 as the vector. It was expressed under control of a cloned Acetogenium promoter or the lacZ gene. We determined the complete sequence of the structural gene. The mature polypeptide comprises 736 amino acids and is preceded by a typical procaryotic signal sequence of 26 amino acids. It i weakly acidic, weakly hydrophilic, and contains a relatively high proportion of hydroxyamino acids, including two clusters of serine and threonine residues. An N-terminal region of about 200 residues is homologous to the N-terminal part of the middle wall protein, one of the two S-layer proteins of Bacillus brevis, and there is also an internal homology within the N-terminal region of the A. kivui polypeptide.     

Odorant-Binding Protein from Culex tarsalis,the Most Competent Vector of West Nile Virus in California

We have identified and cloned an odorantbinding protein from the female mosquito, Culex tarsalis (CtarOBP). As expected for an olfactory protein, CtarOBP was detected by gel electrophoresis analysis in antennae but not in control tissues (legs). The isolated protein was identified by in-gel digestion and subsequent analysis of internal fragments by tandem mass spectrometry (MS-MS). Based on the amino acid sequences of two peptides generated by enzymatic digestion, degenerate primers were designed for cDNA cloning. The complete cDNA (cloned by RACE) encoded a protein with a signal peptide (24 residues) and a mature protein of 125 amino acid residues. The calculated molecular mass and isoelectric point of the mature protein were 14,515 Da and pl 5.5, respectively. CtarOBP showed the hallmark of odorant-binding proteins, 6 cysteine residues, and high sequence homology (61–96%) to previously characterized mosquito OBPs.