Synthetic fragments of calmodulin calcium-binding site III. A test of the acid pair hypothesis

The acid pair hypothesis describing the interaction of calcium with the helix-loop-helix conformation of EF hands in calmodulin and related proteins predicts that these calcium-binding sites will have increased affinity for calcium if the anionic amino acid dentates in the loop region which interact directly with the cation are paired on the axial vertices of the resulting octahedral arrangement of chelating residues about the cation. As a test of this hypothesis, synthetic 33 residue analogs of bovine brain calmodulin calcium-binding site III have been prepared by the solid-phase method and analyzed for calcium affinity. The native sequence has a Kd of 735 microM for calcium and contains three anionic ligands which assume the +x, +y, and -z coordinates of the octahedral arrangement about the cation, thus precluding any pairing of the anionic ligands. This dissociation constant is 26 times weaker than that obtained from a synthetic analog of the sequentially homologous calcium-binding site III of rabbit skeletal TnC (Kd = 28 microM) which has four anionic ligands paired on the x and z axes. An analog of calmodulin site III with substitutions in the chelating residues at positions 1, 3, 5, 7, 9, and 12 of the 12-residue loop region to make these positions identical to those of rabbit skeletal troponin C site III decreased the calcium dissociation constant of the calmodulin peptide to 19 microM, similar to the troponin C peptide. Two synthetic analogs of calmodulin site III which contain three anionic ligands with two ligands paired on the x axis and two on the z axis have a Kd for calcium of 524 and 59 microM, respectively. This study provides strong support for and a better definition of the acid pair hypothesis and further demonstrates the usefulness of synthetic calcium-binding fragments in delineating the mechanism of calcium regulation of calmodulin and related proteins.     

Interaction of troponin I and troponin C: 19F NMR studies of the binding of the inhibitory troponin I peptide to turkey skeletal troponin C.

We have used 19F nuclear magnetic resonance spectroscopy to study the interaction of the inhibitory region of troponin (TnI) with apo- and calcium(II)-saturated turkey skeletal troponin C (TnC), using the synthetic TnI analogue N alpha-acetyl[19FPhe106]TnI(104-115)amide. Dissociation constants of Kd = (3.7 +/- 3.1) x 10(-5) M for the apo interaction and Kd = (4.8 +/- 1.8) x 10(-5) M for the calcium(II)-saturated interaction were obtained using a 1:1 binding model of peptide to protein. The 19F NMR chemical shifts for the F-phenylalanine of the bound peptide are different from the apo- and calcium-saturated protein, indicating a different environment for the bound peptide. The possibility of 2:1 binding of the peptide to Ca(II)-saturated TnC was tested by calculating the fit of the experimental titration data to a series of theoretical binding curves in which the dissociation constants for the two hypothetical binding sites were varied. We obtained the best fit for 0.056 mM less than or equal to Kd1 less than or equal to 0.071 mM and 0.5 mM less than or equal to Kd2 less than or equal to 2.0 mM. These results allow the possibility of a second peptide binding site on calcium(II)-saturated TnC with an affinity 10- to 20-fold weaker than that of the first site.     

Calcium binding proteins. Elucidating the contributions to calcium affinity from an analysis of species variants and peptide fragments

This paper describes the sequence homology of calcium-binding proteins belonging to the troponin C superfamily. Specifically, this similarity has been examined for 276 twelve-residue calcium-binding loops. It has been found that, in the calcium-binding loop, several residues appear invariant, regardless of the species of origin or the affinity of the protein. These residues are Asp at position 1 (+X of the coordinating position of the calcium), Asp or Asn at position 3 (+Y), Gly at position 6, Ile at position 8, and Glu at position 12 (-Z). It has also been found that conservation of certain residues can vary in similar sites in similar proteins. For example, position 3 (+Y) in site 3 of troponin C is always an Asn, whereas in calmodulin the residue is always Asp. This study also examined the calcium-binding affinities of peptide fragments comprising the loop, helix-loop, loop-helix, and helix-loop-helix. These were compared with larger enzymatic or chemically generated protein fragments in an effort to understand the various contributions to the calcium-binding affinity of a single-site versus a two-site domain as found in troponin C and calmodulin. Based on free energy differences, it was found that a 34-residue helix-loop-helix peptide represents about 60% of the binding affinity found in the intact protein. Cooperativity with a second calcium binding site accounted for the remaining 40% of the affinity.     

Calcium affinity of regulatory sites in skeletal troponin-C is attenuated by N-cap mutations of helix C

Site-directed mutagenesis was used to make amino acid substitutions at position 54 of skeletal troponin C, testing a relationship between the stability of helix C and calcium ion affinity at regulatory sites in the protein. Normally, threonine at position 54 is the first helical residue, or N-cap, of the C helix; where helices C and D, and the loop between, comprise binding site II. Mutations were made in the context of a previously described phenylalanine 29--> tryptophan (F29W) variant (Trigo-Gonzalez et al., Biochemistry 31, 7009-7015 (1992)), which allows binding events to be monitored through changes in the intrinsic fluorescence of the protein. N-Cap substitutions at position 54 were shown to attenuate the calcium affinity of regulatory sites in the N-terminal domain. Calcium affinities diminished according to the series T54 T54S > T54A > T54V > T54G with dissociation constants of 1.36 x 10(-6), 1.36 x 10(-6), 2.09 x 10(-6), 2.28 x 10(-6), and 4.24 x 10(-6) M, respectively. The steady state binding of calcium to proteins in the mutant series was seen to be monophasic and cooperative. Calcium off-rates were measured by stopped flow fluorescence and in every instance two transitions were observed. The rate constant of the first transition, corresponding to approximately 99% of the change in fluorescence, was between 900+/-20 and 1470+/-100 s(-1), whereas the rate constant of the second transitions was between 94+/-9 and 130+/-23 s(-1). The significance of two transitions remains unclear, though both rate constants occur on a time scale consistent with the regulation of contraction.     

Fourier transform infrared spectroscopic study on the Ca2+ -bound coordination structures of synthetic peptide analogues of the calcium-binding site III of troponin C

The coordination structures of Ca(2+) ion bound to synthetic peptide analogues of the calcium-binding site III of rabbit skeletal muscle troponin C (TnC) were investigated by Fourier transform infrared (FTIR) spectroscopy. The region of the COO(-) antisymmetric stretching vibration provides information about the coordination modes of a COO(-) group to a metal ion. The 34-residue peptide corresponding to the EF hand motif (helix-loop-helix) showed a band at 1552 cm(-1) in the Ca(2+)-loaded state, indicating that the side-chain COO(-) group of Glu at the 12th position serves as a ligand for Ca(2+) in the bidentate coordination mode. On the other hand, the 13-residue peptide (Ac-DRDADGYIDAEEL-NH(2)) containing the Ca(2+)-binding site III (DRDADGYIDAEE) did not show such spectral patterns in the Ca(2+)-loaded state, meaning that shorter synthetic peptide corresponding to the site III has less or no affinity for Ca(2+). It was found that the 17-residue peptide (Ac-DRDADGYIDAEELAEIF-NH(2)) is the minimum peptide necessary for the interaction of side-chain COO(-)of Glu at the 12th position with Ca(2+) in the bidentate coordination mode. We discuss the relationship between the amino acid length of synthetic peptide analogues and the formation of Ca(2+)-bound coordination structure.     

A model for circular dichroism monitored dimerization and calcium binding in an EF-hand synthetic peptide.

EF-hand peptides have been shown to bind calcium and dimerize to form an intact protein domain [Shaw, G.S., Hodges, R.S. & Sykes, B.D. (1990). Science, 249, 280-283]. A synthetic 33-residue EF-hand peptide with the sequence of carp parvalbumin CD site demonstrated a seven-fold increase in the apparent calcium dissociation constant with a eight-fold decrease in peptide concentration when fit to a single-site calcium-binding model. This observation is consistent with EF-hand dimerization. This paper describes a method to determine the dimerization dissociation constant and the calcium dissociation constants for both the monomer and dimer forms of this EF-hand peptide using circular dichroism techniques. By monitoring the increase in negative molar ellipticity at 222 nm with increasing peptide concentration under calcium-saturating conditions the dimerization dissociation constant for the synthetic parvalbumin CD site was determined to be 55.68+/-10.76 microM. Using the dimerization constant, the calcium dissociation constants for both the monomer and dimer forms of this peptide were determined by monitoring the change in ellipticity of peptide solutions on addition of increasing amounts of calcium. A fit of this data to a mathematical model that takes into account dimerization results in calcium dissociation constants of 421.3+/-21.56 and 47.06+/-6.72 microM for the monomer and dimer forms, respectively.     

Kinetic analysis of the interactions between troponin C and the C-terminal troponin I regulatory region and validation of a new peptide delivery/capture system used for surface plasmon resonance

Using surface plasmon resonance (SPR)-based biosensor analysis and fluorescence spectroscopy, the apparent kinetic constants, k(on) and k(off), and equilibrium dissociation constant, K(d), have been determined for the binding interaction between rabbit skeletal troponin C (TnC) and rabbit skeletal troponin I (TnI) regulatory region peptides: TnI(96-115), TnI(96-131) and TnI(96-139). To carry out SPR analysis, a new peptide delivery/capture system was utilized in which the TnI peptides were conjugated to the E-coil strand of a de novo designed heterodimeric coiled-coil domain. The TnI peptide conjugates were then captured via dimerization to the opposite strand (K-coil), which was immobilized on the biosensor surface. TnC was then injected over the biosensor surface for quantitative binding analysis. For fluorescence spectroscopy analysis, the environmentally sensitive fluoroprobe 5-((((2-iodoacetyl)amino)ethyl)amino) naphthalene-1-sulfonic acid (1,5-IAEDANS) was covalently linked to Cys98 of TnC and free TnI peptides were added. SPR analysis yielded equilibrium dissociation constants for TnC (plus Ca(2+)) binding to the C-terminal TnI regulatory peptides TnI(96-131) and TnI(96-139) of 89nM and 58nM, respectively. The apparent association and dissociation rate constants for each interaction were k(on)=2.3x10(5)M(-1)s(-1), 2.0x10(5)M(-1)s(-1) and k(off)=2.0x10(-2)s(-1), 1.2x10(-2)s(-1) for TnI(96-131) and TnI(96-139) peptides, respectively. These results were consistent with those obtained by fluorescence spectroscopy analysis: K(d) being equal to 130nM and 56nM for TnC-TnI(96-131) and TnC-TnI(96-139), respectively. Interestingly, although the inhibitory region peptide (TnI(96-115)) was observed to bind with an affinity similar to that of TnI(96-131) by fluorescence analysis (K(d)=380nM), its binding was not detected by SPR. Subsequent investigations examining salt effects suggested that the binding mechanism for the inhibitory region peptide is best characterized by an electrostatically driven fast on-rate ( approximately 1x10(8) to 1x10(9)M(-1)s(-1)) and a fast off-rate ( approximately 1x10(2)s(-1)). Taken together, the determination of these kinetic rate constants permits a clearer view of the interactions between the TnC and TnI proteins of the troponin complex.     

Metal binding affinity and structural properties of an isolated EF-loop in a scaffold protein.

To establish an approach to obtain the site-specific calcium binding affinity of EF-hand proteins, we have successfully designed a series of model proteins, each containing the EF-hand calcium-binding loop 3 of calmodulin, but with increasing numbers of Gly residues linking the loop to domain 1 of CD2. Structural analyses, using different spectroscopic methods, have shown that the host protein is able to retain its native structure after insertion of the 12-residue calcium-binding loop and retains a native thermal stability and thermal unfolding behavior. In addition, calcium binding to the engineered CD2 variants does not result in a significant change from native CD2 conformation. The CD2 variant with two Gly linkers has been shown to have the strongest metal binding affinity to Ca(II) and La(III). These experimental results are consistent with our molecular modeling studies, which suggest that this protein with the engineered EF-loop has a calmodulin-like calcium binding geometry and backbone conformation. The addition of two Gly linkers increases the flexibility of the inserted EF-loop 3 from calmodulin, which is essential for the proper binding of metal ions.     

Structural and biological studies on synthetic peptide analogues of a low-affinity calcium-binding site of skeletal troponin C

We have synthesized four oligopeptides that are structural analogues of a low-affinity Ca2+-specific binding site (site II) of rabbit skeletal troponin C. One analogue (peptide 3) was a dodecapeptide with a sequence corresponding to the 12-residue Ca2+-binding loop (residues 63-74 in troponin C), two (peptides 4 and 5) were 23-residue in length, corresponding to residues 52-74 of the protein, and the fourth (peptide 6) was a 25-residue peptide corresponding to residues 50-74. All four peptides had one amino acid substitution within the 12-residue binding loop in which phenylalanine at position 10 was replaced by tyrosine to provide a marker for spectroscopic studies. In addition, peptides 3 and 4 each had a second substitution within the binding loop where glycine at position 6 was replaced by alanine. The second substitution was motivated by the conservation of glycine at the position in the Ca2+-binding loops of all four Ca2+-binding sites in troponin C. The peptides were characterized by their intrinsic fluorescence, ability to enhance the emission of bound Tb3+, affinity for Ca2+ and Tb3+, and circular dichroism. The affinity for Ca2+ was in the range 10-10(2) M-1, and the affinity for Tb3+ was in the range 10(4)-10(5) M-1. The binding constants of the longer peptides were several-fold larger than that of the dodecapeptide. With peptides 4 and 5, substitution of glycine by alanine at position 6 within the 12-residue loop decreased the affinity for Ca2+ by a factor of four, but had little effect on the affinity for Tb3+. However, the mean residue ellipticity of peptide 4 was substantially higher than that of peptide 5. Since peptide 4 differs from peptide 5 only in the substitution of glycine at position 6 in the loop segment, the conservation of glycine at that position may serve a role in providing a suitable secondary structure of the binding sites for interaction with troponin I. Peptides 4 and 6, when present in a large excess, mimic troponin C in regulating fully reconstituted actomyosin ATPase by showing partial calcium sensitivity and activation of the ATPase. Since these peptides are the smallest peptides containing the Ca2+-binding loop of site II, their biological activity suggests that a Ca2+-dependent binding site of troponin C for troponin I could be as short as the segment comprising residues 52-62.     

Calmodulin and troponin C: affinity chromatographic study of divalent cation requirements for troponin I inhibitory peptide (residues 104-115), mastoparan and fluphenazine binding

The different conformations induced by the binding of Mg2+ or Ca2+ to troponin C (TnC) and calmodulin (CaM) results in the exposure of various interfaces with potential to bind target compounds. The interaction of TnC or CaM with three affinity columns with ligands of either the synthetic peptide of troponin I (TnI) inhibitory region (residues 104-115), mastoparan (a wasp venom peptide), or fluphenazine (a phenothiazine drug) were investigated in the presence of Mg2+ or Ca2+. TnC and CaM in the presence of either Ca2+ or Mg2+ bound to the TnI peptide 104-115. The cation specificity for this interaction firmly establishes that the TnI inhibitory region binds to the high affinity sites of TnC (most likely the N-terminal helix of site III) and presumably the homologous region of CaM. Mastoparan interacted strongly with both proteins in the presence of Ca2+ but, in the presence of Mg2+, did not bind to TnC and only bound weakly to CaM. Fluphenazine bound to TnC and CaM only in the presence of Ca2+. When the ligands interacted with either proteins there was an increase in cation affinity, such that TnC and CaM were eluted from the TnI peptide or mastoparan affinity column with 0.1 M EDTA compared with the 0.01 M EDTA required to elute the proteins from the fluphenazine column. The interaction of these ligands with their receptor sites on TnC and CaM require a specific and spatially correct alignment of hydrophobic and negatively charged residues on these proteins.(ABSTRACT TRUNCATED AT 250 WORDS)     

Direct interaction of the calcium sensor protein synaptotagmin I with a cytoplasmic domain of the alpha1A subunit of the P/Q-type calcium channel.

Synaptotagmins are synaptic vesicle proteins containing two calcium-binding C2 domains which are involved in coupling calcium influx through voltage-gated channels to vesicle fusion and exocytosis of neurotransmitters. The interaction of synaptotagmins with native P/Q-type calcium channels was studied in solubilized synaptosomes from rat cerebellum. Antibodies against synaptotagmins I and II, but not IV co-immunoprecipitated [125I]omega-conotoxin MVIIC-labelled calcium channels. Direct interactions were studied between in vitro-translated [35S]synaptotagmin I and fusion proteins containing cytoplasmic loops of the alpha1A subunit (BI isoform). Gel overlay revealed the association of synaptotagmin I with a single region (residues 780-969) located in the intracellular loop connecting homologous domains II and III. Saturable calcium-independent binding occurred with equilibrium dissociation constants of 70 nM and 340 nM at 4 degrees C and pH 7.4, and association was blocked by addition of excess recombinant synaptotagmin I. Direct synaptotagmin binding to the pore-forming subunit of the P/Q-type channel may optimally locate the calcium-binding sites that initiate exocytosis within a zone of voltage-gated calcium entry.     

Use of engineered proteins with internal tryptophan reporter groups and pertubation techniques to probe the mechanism of ligand-protein interactions: investigation of the mechanism of calcium binding to calmodulin.

Stopped-flow kinetic and fluorescence spectroscopic analyses, including solvent and temperature perturbations, of five isofunctional structural mutants of calmodulin indicate that calcium binding to calmodulin follows the order site III, site IV, site I, site II, with dissociation occurring in the reverse order. Each of the isofunctional structural mutants contains a single tryptophan residue, introduced by site-specific mutagenesis, as an internal spectroscopic reporter group that was used as a probe of local conformational change. Calcium binding was studied by using flow dialysis or by using fluorescence spectroscopy and monitoring the change in the single tryptophan residue in each calcium-binding site. Calcium removal was examined by using EDTA and monitoring tryptophan fluorescence or by using Quin 2 and monitoring the change in the chromophoric chelator. Computational analysis of the data suggests a rate-limiting step for dissociation between calcium removal from sites I/II and sites III/IV. Unexpected results with the site IV isofunctional mutant (Q135W-CaM) indicated cross-talk between the amino and carboxyl terminal halves of CaM during the calcium-binding mechanism. Studies with ethylene glycol provided empirical data that suggest the functional importance of the electrostatic potential of CaM, or the molarity of water, in the calcium-binding process. Altogether, the data allowed a kinetic extension of the sequential, cooperative model for calcium binding to calmodulin and provided values for additional parameters in the model of calcium binding to CaM, a prototypical member of the family of proteins required for calcium signal transduction in eukaryotic cells.(ABSTRACT TRUNCATED AT 250 WORDS)     

Polymerization and calcium binding of the tubulin-colchicine complex in the GDP state

The tubulin-colchicine complex instead of tubulin was used in an imidazole buffer throughout experiments. The interaction with calcium was examined, especially in the GDP state. The high affinity sites of calcium took part in the polymerization of the complex in the GTP state, while the low ones participated in the depolymerization. The complex had 2 high affinity sites with the dissociation constant of 11.5 x 10(-6) M, and 16 low affinity sites with the dissociation constant of 2.27 x 10(-4) M in the GTP state. In the case of GDP state, the dissociation constant of the high affinity site was 7.2 x 10(-6) M, and the low affinity site was not observed. The ultracentrifugal experiment indicated a little compact structure in the GTP state compared with the GDP state. This agreed with the results of calcium binding.     

Probing the gamma2 calcium-binding site: studies with gammaD298,301A fibrinogen reveal changes in the gamma294-301 loop that alter the integrity of the "a" polymerization site

To determine the significance of the gamma2 calcium-binding site in fibrin polymerization, we synthesized the fibrinogen variant, gammaD298,301A. We expected these two alanine substitutions to prevent calcium binding in the gamma2 site. We examined the influence of calcium on the polymerization of gammaD298,301A fibrinogen, evaluated its plasmin susceptibility, and solved 2.7 and 2.4 A crystal structures of the variant with the peptide ligands Gly-Pro-Arg-Pro-amide (GPRP) and Gly-His-Arg-Pro-amide (GHRP), respectively. We found that thrombin-catalyzed polymerization of gammaD298,301A fibrinogen was modestly impaired, whereas batroxobin-catalyzed polymerization was significantly impaired relative to normal fibrinogen. Notably, the influence of calcium on polymerization was the same for the variant and for normal fibrinogen. Fibrinogen gammaD298,301A was more susceptible to plasmin proteolysis in the presence of GPRP. This finding suggests structural changes in the near-by "a" polymerization site. Comparisons of the structures revealed minor conformational changes in the gamma294-301 loop that are likely responsible for the weakened "a" site. When considered altogether, the data suggest that the gamma2 calcium-binding site does not significantly modulate polymerization. We cannot, however, rule out the possibility that the weakened "a" polymerization site masks an important role for the gamma2 calcium-binding site in normal polymerization. Somewhat unexpectedly, the structure data showed that GPRP bound to the "b" site and induced the same local conformational changes as GHRP to this site. This structure shows that "A:b" interactions can occur and suggests that these may participate in normal polymerization.     

Parallel measurement of Ca2+ binding and fluorescence emission upon Ca2+ titration of recombinant skeletal muscle troponin C. Measurement of sequential calcium binding to the regulatory sites

Calcium binding to chicken recombinant skeletal muscle TnC (TnC) and its mutants containing tryptophan (F29W), 5-hydroxytryptophan (F29HW), or 7-azatryptophan (F29ZW) at position 29 was measured by flow dialysis and by fluorescence. Comparative analysis of the results allowed us to determine the influence of each amino acid on the calcium binding properties of the N-terminal regulatory domain of the protein. Compared with TnC, the Ca(2+) affinity of N-terminal sites was: 1) increased 6-fold in F29W, 2) increased 3-fold in F29ZW, and 3) decreased slightly in F29HW. The Ca(2+) titration of F29ZW monitored by fluorescence displayed a bimodal curve related to sequential Ca(2+) binding to the two N-terminal Ca(2+) binding sites. Single and double mutants of TnC, F29W, F29HW, and F29ZW were constructed by replacing aspartate by alanine at position 30 (site I) or 66 (site II) or both. Ca(2+) binding data showed that the Asp --> Ala mutation at position 30 impairs calcium binding to site I only, whereas the Asp --> Ala mutation at position 66 impairs calcium binding to both sites I and II. Furthermore, the Asp --> Ala mutation at position 30 eliminates the differences in Ca(2+) affinity observed for replacement of Phe at position 29 by Trp, 5-hydroxytryptophan, or 7-azatryptophan. We conclude that position 29 influences the affinity of site I and that Ca(2+) binding to site I is dependent on the previous binding of metal to site II.     

Calcium-binding properties of wild-type and EF-hand mutants of S100B in the presence and absence of a peptide derived from the C-terminal negative regulatory domain of p53

S100B is a dimeric Ca(2+)-binding protein that undergoes a 90 +/- 3 degrees rotation of helix 3 in the typical EF-hand domain (EF2) upon the addition of calcium. The large reorientation of this helix is a prerequisite for the interaction between each subunit of S100B and target proteins such as the tumor suppressor protein, p53. In this study, Tb(3+) was used as a probe to examine how binding of a 22-residue peptide derived from the C-terminal regulatory domain of p53 affects the rate of Ca(2+) ion dissociation. In competition studies with Tb(3+), the dissociation rates of Ca(2+) (k(off)) from the EF2 domains of S100B in the absence and presence of the p53 peptide was determined to be 60 and 7 s(-)(1), respectively. These data are consistent with a previously reported result, which showed that that target peptide binding to S100B enhances its calcium-binding affinity [Rustandi et al. (1998) Biochemistry 37, 1951-1960]. The corresponding Ca(2+) association rate constants for S100B, k(on), for the EF2 domains in the absence and presence of the p53 peptide are 1.1 x 10(6) and 3.5 x 10(5) M(-)(1) s(-)(1), respectively. These two association rate constants are significantly below the diffusion control ( approximately 10(9) M(-)(1) s(-)(1)) and likely involve both Ca(2+) ion association and a Ca(2+)-dependent structural rearrangement, which is slightly different when the target peptide is present. EF-hand calcium-binding mutants of S100B were engineered at the -Z position (EF-hand 1, E31A; EF-hand 2, E72A; both EF-hands, E31A + E72A) and examined to further understand how specific residues contribute to calcium binding in S100B in the absence and presence of the p53 peptide.     

1H-NMR studies of synthetic peptide analogues of calcium-binding site III of rabbit skeletal troponin C: effect on the lanthanum affinity of the interchange of aspartic acid and asparagine residues at the metal ion coordinating positions

The present work determines the contribution of liganding aspartic acid (Asp) residues, at the +X, +Y, and +Z metal ion coordinating positions, to the lanthanum(3+) (La3+) ion binding affinity of synthetic analogues of calcium-binding site III of rabbit skeletal troponin C. Eight 13-residue synthetic analogues were prepared by solid-phase synthesis; the primary sequences of these analogues represent all possible combinations having aspartic acid and asparagine at the +X, +Y, and +Z positions. High-field proton nuclear magnetic resonance (NMR) spectroscopy was used to monitor the binding of the La3+ ion to each of the analogues. Comparison of the chemical shift changes showed large variations in the magnitude of the shift; these were reflected in the La3+ ion association constants determined for each analogue. The association constants ranged from 9.1 x 10(2) M-1 to 2.5 x 10(5) M-1. It was observed that those analogues with the larger number of acidic residues to coordinate the La3+ ion yielded the higher association constants. The La3+ ion binding results demonstrate that the Asp residues at the positions of study contribute equally and in an additive manner to the association constant and that the presence of neighboring Asp residues at either the +X and +Y, the +Y and +Z, or the +X and +Y and +Z metal ion coordinating positions introduced dentate-dentate repulsion, which, acts as to detract from the La3+ ion association constant of the analogues.     

Purification,amino acid sequence,and cDNA cloning of trypsin inhibitors from onion (Allium cepa L.) bulbs

Three protease inhibitors (OTI-1-3) have been purified from onion (Allium cepa L.) bulbs. Molecular masses of these inhibitors were found to be 7,370.2, 7,472.2, and 7,642.6 Da by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF-MS), respectively. Based on amino acid composition and N-terminal sequence, OTI-1 and -2 are the N-terminal truncated proteins of OTI-3. All the inhibitors are stable to heat and extreme pH. OTI-3 inhibited trypsin, chymotrypsin, and plasmin with dissociation constants of 1.3 x 10(-9) M, 2.3 x 10(-7) M, and 3.1 x 10(-7) M, respectively. The complete amino acid sequence of OTI-3 showed a significant homology to Bowman-Birk family inhibitors, and the first reactive site (P1) was found to be Arg17 by limited proteolysis by trypsin. The second reactive site (P1) was estimated to be Leu46, that may inhibit chymotrypsin. OTI-3 lacks an S-S bond near the second reactive site, resulting in a low affinity for the enzyme. The sequence of OTI-3 was also ascertained by the nucleotide sequence of a cDNA clone encoding a 101-residue precursor of the onion inhibitor.     

Effects of mutations in the calcium-binding sites of recoverin on its calcium affinity: evidence for successive filling of the calcium binding sites

A molecule of the photoreceptor Ca(2+)-binding protein recoverin contains four potential EF-hand Ca(2+)-binding sites, of which only two, the second and the third, are capable of binding calcium ions. We have studied the effects of substitutions in the second, third and fourth EF-hand sites of recoverin on its Ca(2+)-binding properties and some other characteristics, using intrinsic fluorescence, circular dichroism spectroscopy and differential scanning microcalorimetry. The interaction of the two operating binding sites of wild-type recoverin with calcium increases the protein's thermal stability, but makes the environment around the tryptophan residues more flexible. The amino acid substitution in the EF-hand 3 (E121Q) totally abolishes the high calcium affinity of recoverin, while the mutation in the EF-hand 2 (E85Q) causes only a moderate decrease in calcium binding. Based on this evidence, we suggest that the binding of calcium ions to recoverin is a sequential process with the EF-hand 3 being filled first. Estimation of Ca(2+)-binding constants according to the sequential binding scheme gave the values 3.7 x 10(6) and 3.1 x 10(5) M(-1) for third and second EF-hands, respectively. The substitutions in the EF-hand 2 or 3 (or in both the sites simultaneously) do not disturb significantly either tertiary or secondary structure of the apo-protein. Amino acid substitutions, which have been designed to restore the calcium affinity of the EF-hand 4 (G160D, K161E, K162N, D165G and K166Q), increase the calcium capacity and affinity of recoverin but also perturb the protein structure and decrease the thermostability of its apo-form.     

The refined structure of vitamin D-dependent calcium-binding protein from bovine intestine. Molecular details, ion binding, and implications for the structure of other calcium-binding proteins

The structure of bovine intestinal calcium-binding protein (ICaBP) has been determined crystallographically at a resolution of 2.3 A and refined by a least squares technique to an R factor of 17.8%. The refined structure includes all 600 non-hydrogen protein atoms, two bound calcium ions, and solvent consisting of one sulfate ion and 36 water molecules. The molecule consists of two helix-loop-helix calcium-binding domains known as EF hands, connected by a linker containing a single turn of helix. Helix-helix interactions are primarily hydrophobic, but also include a few strategic hydrogen bonds. Most of the hydrogen bonds, however, are found in the calcium-binding loops, where they occur both within a single loop and between the two. Examination of the hydrogen bonding patterns in the calcium-binding loops of ICaBP and the related protein, parvalbumin, reveals several conserved hydrogen bonds which are evidently important for loop stabilization. The primary and tertiary structural features which promote the formation of an EF hand were originally identified from the structure of parvalbumin. They are modified in light of the ICaBP structure and considered as they apply to other calcium-binding proteins. The C-terminal domain of ICaBP is a normal EF hand, with ion binding properties similar to those of the calmodulin hands, but the N-terminal domain is a variant hand whose calcium ligands are mostly peptide carbonyls. Relative to a normal EF hand, this domain exhibits a similar KD for calcium binding but a greatly reduced affinity for calcium analogs such as cadmium and the lanthanide series. Lanthanides in particular may be inappropriate models for calcium in this system.