Insertion sites and the terminal nucleotide sequences of the Tn4 transposon.

The nucleotide sequences at the ends of the Tn4 transposon (mercury spectinomycin and sulfonamide resistance) have been determined. They are inverted repeated sequences of 38 nucleotides with three mismatched base pairs. These sequences are strongly homologous with the terminal sequences of Tn501 (mercury resistance) but less so with those of Tn3 (ampicillin resistance). The Tn4 transposon generates pentanucleotide members (Tn3, Tn1000, Tn501, Tn551, IS2) with the exception of Tn1721 and bacteriophage Mu. Among the three Tn4 insertion sites examined here, two of them occurred near a nonanucleotide sequence in perfect homology with part of the terminal inverted-repeat sequence of Tn4 and the third insertion occurred near a sequence of partial homology to one end of Tn4. All three insertions were in the same orientation such that IRb is proximal to its homologous sequence on the recipient DNA.     

DNA sequence analysis of the transposon Tn3: three genes and three sites involved in transposition of Tn3.

The complete nucleotide sequence of the transposon Tn3 and of 20 mutations which affect its transposition are reported. The mutations, generated in vitro by random insertion of synthetic restriction sites, proved to contain small duplications or deletions immediately adjacent to the new restriction site. By determining the phenotype and DNA sequence of these mutations we were able to generate an overlapping phenotypic and nucleotide map. This 4957 bp transposon encodes three polypeptides which account for all but 350 bp of its total coding capacity. These proteins are the transposase, a high molecular weight polypeptide (1015 amino acids) encoded by the tnpA gene; the Tn3-specific repressor, a low molecular weight polypeptide (185 amino acids) encoded by the tnpR gene; and the 286 amino acid beta-lactamase. The 38 bp inverted repeats flanking Tn3 appear to be absolutely required in cis for Tn3 to transpose. Genetic data suggest that Tn3 contains a third site (Gill et al., 1978), designated IRS (internal resolution site), whose absence results in the insertion of two complete copies of Tn3 as direct repeats into the recipient DNA. We suggest that these direct repeats of complete copies of Tn3 are intermediates in transposition, and that the IRS site is required for recombination and subsequent segregation of the direct repeats to leave a single copy of Tn3 (Gill et al., 1978). A 23 nucleotide sequence within the amino terminus of the transposase which shares strong sequence homology with the inverted repeat may be the internal resolution site.     

The transposon Tn9 generates a 9 bp repeated sequence during integration.

We performed a genetic and sequencing analysis of insertions of the transposon Tn9 into the lac operon of E. coli. Genetic mapping of 70 insertions into lacl and Z shows that starting from the same point on the chromosome, Tn9 goes to at least 50 different points in these two genes. Although there are preferred regions for insertion, these consist of multiple integration points within a small area, as demonstrated by pairwise crosses and restriction mapping. Sequence analysis of three Tn9 insertions reveals that Tn9 integration is associated with a direct repeat of 9 base pairs (bp) of host sequence. We show that these extra 9 nucleotide pairs are generated upon insertion and not brought in with the element.     

Characterization of inverted repeated sequences in wheat nuclear DNA.

The properties of inverted repeated sequences in wheat nuclear DNA have been studied by HAP(1) chromatography, nuclease S1 digestion and electron microscopy. Inverted repeated sequences comprise 1.7% of wheat genome. The HAP studies show that the amount of "foldback HAP bound DNA" depends on DNA length. Inverted repeats appear to be clustered with an average intercluster distance of 25 kb. It is estimated that there are approximately 3 x 10(6) inverted repeats per haploid wheat genome. The sequences around inverted repeats involve all families of repetition frequencies. Inverted repeats are observed as hairpins in electron microscopy. 20% of hairpins are terminated by a single-stranded spacer ranging from 0.3 to 1.5 kb in length. Duplex regions of the inverted repeats range from 0.1 to 0.45 kb with number average values of 0.24 kb and 0.18 kb for unlooped and looped hairpin respectively. Thermal denaturations and nuclease S1 digestions have revealed a length of about 100 bases for duplex regions. The methods used to study inverted repeated sequences are compared and discussed.     

Characterization of inverted repeated sequences in Ascaris nuclear DNA

The inverted repeated sequences of the chromatin-eliminating nematode Ascaris lumbricoides var. suum have been examined by electron microscopy and by hydroxyapatite chromatography, both in the germ-line and in the somatic DNA. 38% of the inverted repeats of the germ-line DNA analysed in the electron microscope have a single-stranded loop, in comparison to about 50% of looped structures in the somatic DNA. The loops are on average 2.3 X 10(3) base pairs (bp) long. The rest of the foldback DNA consists of simple hairpins. The average length of looped and unlooped inverted repeats is of the order of 300-400 bp in the germ-line and in the somatic DNA. The content of S1-resistant foldback duplexes isolated by hydroxyapatite chromatography amounts to 1.3% in spermatids, with an average length of 350 bp, and to 1.1% in intestinal or larval cell nuclei, with a length of about 320 bp. We estimate by two different methods that there exist approximately 12500 inverted repeats per haploid germ-line genome and approximately 8000 in the haploid somatic genome. A statistical analysis of the data indicates that the great majority of the foldback sequences are randomly distributed in the Ascaris genome, with a spacing of about (40-80) X 10(3) bp, both in the germ-line and in the somatic DNA.     

Cytological localization of inverted repeated DNA sequences in Vicia faba

Inverted repeated DNA sequences have been isolated from sheared Vicia faba DNA by hydroxylapatite column chromatography, treated with nuclease S₁, tritiated by the nick translation method and hybridized in situ on squashes of Vicia faba root tips. Silver grains appear grouped in a rather limited portion of interphase nuclei and form a sort of band across them. The central regions of metaphase chromosomes are preferentially labeled, labeling being excluded from telomeres, centromeres and secondary constrictions. These results are briefly discussed in relation to those obtained in other species and the functional significance of inverted repeats.     

Arrayed transposase-binding sequences on the ends of transposon Tn5090/Tn402

The transposon Tn5090/Tn402 encodes a 559 amino acid transposase, TniA, with a DDE motif. Gel mobility shifting and cleavage protection analysis with DNase I and hydroxyl radical probes revealed that TniA binds to multiple repeat sequences on either terminus of Tn5090/Tn402. Four of these TniA-binding 19mers occurred on the left-hand (t) end and two on the right-hand (i) end. Hydroxyl radical cleavage protection demonstrated the presence of 3–6 bp contact sequences on one face of the DNA helix. The binding pattern and organisation of repeats suggested parallels between Tn5090/Tn402 and Mu, which controls its transpositional activity in the assembly step of a higher order transpososome complex. The complex terminal structure and genes of transposase and nucleotide-binding proteins in tandem are hallmarks of the handful of Mu-like elements that are known to date.     

Insertion site specificity of the transposon Tn3.

The Tn3-deletion method [Davies and Hutchison, Nucleic Acids Res. 19, 5731-5738, (1991)] was used to sequence a 9.4 kb DNA fragment. Transpositional 'warm' spots were not a limiting factor but a 935 bp 'cold' spot was completed using a synthetic oligonucleotide primer. Two hundred and twenty three miniTn3 insertion sites from three sequencing projects were aligned and a 19 bp asymmetric consensus site was identified. There is no absolute sequence requirement at any position in this consensus, so insertion occurs promiscuously (approximately 37% of sites are potential targets). In our sequencing projects, multiply targeted sites always closely matched the consensus, although not all close matches were targeted frequently. The 935 bp cold spot showed no unusual features when analysed with the consensus sequence. The consensus can be used to accurately predict likely insertion sites in a new sequence. Synthetic oligonucleotides based on the consensus and a known hot spot for Tn3 were mutagenised. These sequences were not hot spots in our vectors, suggesting that the primary sequence alone is not sufficient to create an insertional hot spot. We conclude that some other factor, such as DNA secondary structure, also plays an important role in target site selection for the transposon Tn3.     

Multiple integration sites for the lactose transposon Tn951 on plasmid RP1 and establishment of a coordinate system for Tn951

Summary Various molecules generated by transposition of the lactose transposon Tn951 from plasmid pGC1 to plasmid RP1 were examined by DNA heteroduplex and restriction endonuclease analysis. Tn951 was found to transpose to at least eight different sites on RP1 in both possible orientations. A coordinate system for the lactose transposon Tn951 is constructed.     

Location of ribosome-binding sites on the tetracycline resistance transposon Tn10.

Eight ribosome-binding sites were located on the single-stranded Tn10 DNA loop which was formed after denaturation of lambda phage DNA containing the Tn10 transposon sequence. Ribosomes were bound only to the Tn10 loop contained on the R strand of lambda DNA but not to that on the L strand, suggesting that one of the two strands of Tn10 DNA is selectively transcribed. Six of the eight ribosome binding sites were located in one-half of the DNA loop. The maximum sizes of potential polypeptides were calculated for these genes to range between 9,500 and 84,000 daltons.     

Binding of the Tn3 transposase to the inverted repeats of Tn3

The transposase protein and the inverted repeat sequences of Tn3 are both essential for Tn3 cointegrate formation and transposition. We have developed two assays to detect site-specific binding of transposase to the inverted repeats: (1) a nitrocellulose filter binding assay in which transposase preferentially retains DNA fragments containing inverted repeat sequences, and (2) a DNase 1 protection assay in which transposase prevents digestion of the inverted repeats by DNase 1. Both assays show that transposase binds directly to linear, duplex DNA containing the inverted repeats. The right inverted repeat of Tn3 binds slightly more strongly than the left one. Site-specific binding requires magnesium but does not require a high energy cofactor.     

Nucleotide sequences at the ends of the mercury resistance transposon, Tn501.

The nucleotide sequences at the ends of the mercury-resistance transposon, Tn501, have been determined. The terminal sequences are inverted repeated sequences 38 nucleotide pairs in length, which differ in 3 nucleotide pairs. The transposon is flanked by directly repeated sequences of 5 nucleotide pairs, originating from a single pentanucleotide sequence in the recipient replicon. There is no obvious homology between recipient replicons at the site of insertion of the transposon. The structures of the ends of Tn501 are compared with those of other transposons and insertion sequences. The use of Tn501 to locate an EcoRI site within a genetically defined sequence of interest is discussed.     

转座子Tn917插入位点侧翼序列的扩增

为了克隆到生防菌株的抗病基因,以一株对灰葡萄孢菌表现很高拮抗活性的蜡样芽孢杆菌B-02菌株为材料,利用转座子标签技术得到拮抗性消失的突变体,进而利用TAIL-PCR技术扩增出Tn917插入位点两侧的未知序列,利用生物信息学分析扩增序列,为进一步研究该基因片段与菌株拮抗性之间的关系奠定了基础。     

Insertion of the Tn3 transposon into the genome of the single-stranded DNA phage M13.

The transposable genetic element Tn3, which carries an ampicillin (Ap) resistance determinant, has been translocated from a ColE1-Apr plasmid, RSF2124, to the genome of the filamentous single-stranded DNA phage M13. The site orientation of the inserted element has been determined for one such phage, M13::Tn3-15. The insertion is within the intergenic space separating genes 2 and 4 and containing both the viral strand and complementary strand origins. The lengths of both the filamentous phage and the duplex replicative form (RF) DNA are 1.7--1.8 times those of M13 phage and replicative form DNA. Both plaque formation and transduction of sensitive cells to ampicillin resistance by M13::Tn3-15 are sensitive to purified antibodies to the M13 major coat protein.     

Location of sites of transposon Tn916 insertion in the Mycoplasma mycoides genome.

The genome of Mycoplasma mycoides subsp. mycoides GC1176-2 was cleaved into six large fragments by the endonuclease KpnI which also cleaved the transposon Tn916 once. This has allowed genomic mapping of insertion sites for 50 transformants of GC1176-2 containing Tn916. Almost all of the mapped sites were clearly separate. The transformants provide a bank of genomes each with a KpnI site at a different position to facilitate mapping of gene loci.     

In vitro transposition of transposon Tn3

Transposition of the ampicillin-resistant transposon Tn3 was reproduced in vitro using the Escherichia coli cell extract. In this cell-free system, we used plasmid DNA carrying mini-Tn3 as donor and phage lambda DNA as target and assayed for ampicillin-resistance transducing phages formed by cointegration of these DNA molecules. Ampicillin-resistance transducing phages, which were obtained by in vitro packaging of lambda DNA after the in vitro transposition reaction, were formed only in the presence of Tn3 transposase. The reaction required mini-Tn3 with the proper sequence and orientation of the terminal inverted repeats of Tn3. The reaction also required DNA synthesis but not RNA synthesis by E. coli RNA polymerase.     

DNA binding by the Xis protein of the conjugative transposon Tn916.

We purified the Xis protein of the conjugative transposon Tn916 and showed by nuclease protection experiments that Xis bound specifically to sites close to each end of Tn916. These specific binding sites are close to, and in the same relative orientation to, binding sites for the N-terminal domain of Tn916 integrase protein. These results suggest that Xis is involved in the formation of nucleoprotein structures at the ends of Tn916 that help to correctly align the ends so that excision can occur.     

Site-specific recombinations between direct and inverted res sites of Tn2501

The resolvase gene and the putative res site of Tn2501 are not closely related to any of the previously described resolution functions. In view of this divergence, we designed genetic experiments to confirm the localization of the res site. We analyzed the activity of the Tn2501-encoded resolvase on substrates containing either directly or invertedly repeated res sites. These experiments confirm the localization of the res site that was predicted from nucleotide sequence data and show that the Tn2501 resolvase promotes site-specific inversions in vivo.     

Specific DNA cleavage mediated by the integrase of conjugative transposon Tn916.

The conjugative transposon Tn916 encodes a protein called INT(Tn916) which, based on DNA sequence comparisons, is a member of the integrase family of site-specific recombinases. Integrase proteins such as INT(lambda), FLP, and XERC/D that promote site-specific recombination use characteristic, conserved amino acid residues to catalyze the cleavage and ligation of DNA substrates during recombination. The reaction proceeds by a two-step transesterification reaction requiring the formation of a covalent protein-DNA intermediate. Different requirements for homology between recombining DNA sites during integrase-mediated site-specific recombination and Tn916 transposition suggest that INT(Tn916) may use a reaction mechanism different from that used by other integrase recombinases. We show that purified INT(Tn916) mediates specific cleavage of duplex DNA substrates containing the Tn916 transposon ends and adjacent bacterial sequences. Staggered cleavages occur at both ends of the transposon, resulting in 5' hydroxyl protruding ends containing coupling sequences. These are sequences that are transferred with the transposon from donor to recipient during conjugative transposition. The nature of the cleavage products suggests that a covalent protein-DNA linkage occurs via a residue of INT(Tn916) and the 3'-phosphate group of the DNA. INT(Tn916) alone is capable of executing the strand cleavage step required for recombination during Tn916 transposition, and this reaction probably occurs by a mechanism similar to that of other integrase family site-specific recombinases.