Mode of action of acidocin 8912, a bacteriocin produced by Lactobacillus acidophilus TK8912

K.A. HOEKSTRA AND R.J.L. PAULTON. 1996. Disc agar diffusion testing was performed on 547 isolates (two common pathogens) to determine if the site of isolation influenced the antimicrobial susceptibility results for a given bacterium. The most statistically significant results ( P < 0.05) included cephalothin (ear) against Staphylococcus aureus and cephalothin (ear), lincomycin (ear), trimethoprim sulpha (ear), and amoxycilin and clavulanic acid (nose) against Staph. intermedius. Although the impact of these results (empirical treatment) is unknown, it is hypothesized that the site of isolation of Staph. aureus and Staph. intermedius may influence the choice of antimicrobial therapy in the dog and cat.     

Purification and some properties of acidocin 8912, a novel bacteriocin produced by Lactobacillus acidophilus TK8912.

Acidocin 8912, a bacteriocin produced by Lactobacillus acidophilus TK8912, was purified by ammonium sulfate fractionation and successive chromatographies on CM-cellulose, Sephadex G-50, Sephadex G-25, and reversed-phase HPLC on Aquapore RP-300. The purified acidocin 8912 migrated as a single band on SDS-PAGE. The molecular weight was estimated to be 5200 by SDS-PAGE, and 5400 by HPLC gel filtration on TSKgel G3000PWXL. Both the amino acid composition and the N-terminal amino acid sequence analysis indicated that acidocin 8912 was a peptide composed of presumably 50 amino acids containing a Lys residue at the N-terminus. The purified acidocin 8912 showed a bactericidal effect on sensitive cells but not a bacteriolytic effect.     

Isolation and characterization of acidocin A and cloning of the bacteriocin gene from Lactobacillus acidophilus.

Acidocin A, a bacteriocin produced by Lactobacillus acidophilus TK9201, is active against closely related lactic acid bacteria and food-borne pathogens including Listeria monocytogenes. The bacteriocin was purified to homogeneity by ammonium sulfate precipitation and sequential ion-exchange and reversed-phase chromatographies. The molecular mass was determined by high-performance liquid chromatography gel filtration to be 6,500 Da. The sequence of the first 16 amino acids of the N terminus was determined, and oligonucleotide probes based on this sequence were constructed to detect the acidocin A structural gene acdA. The probes hybridized to the 4.5-kb EcoRI fragment of a 45-kb plasmid, pLA9201, present in L. acidophilus TK9201, and the hybridizing region was further localized to the 0.9-kb KpnI-XbaI fragment. Analysis of the nucleotide sequence of this fragment revealed that acidocin A was synthesized as an 81-amino-acid precursor including a 23-amino-acid N-terminal extension. An additional open reading frame (ORF2) encoding a 55-amino-acid polypeptide was found downstream of and in the same operon as acdA. Transformants containing this ORF2 became resistant to acidocin A, suggesting that ORF2 encodes an immunity function for acidocin A. The 7.2-kb SacI-XbaI fragment containing the upstream region of acdA of pLA9201 was necessary for acidocin A expression in the acidocin A-deficient mutant, L. acidophilus TK9201-1, and other Lactobacillus strains.     

Purification and Some Properties of Acidocin 8912, a Novel Bacteriocin Produced by Lactobacillus acidophilus TK8912

Acidocin 8912, a bacteriocin produced by Lactobacillus acidophilus TK8912, was purified by ammonium sulfate fractionation and successive chromatographies on CM-cellulose, Sephadex G-50, Sephadex G-25, and reversed-phase HPLC on Aquapore RP-300. The purified acidocin 8912 migrated as a single band on SDS–PAGE. The molecular weight was estimated to be 5200 by SDS–PAGE, and 5400 by HPLC gel filtration on TSKgel G3000PW_XL. Both the amino acid composition and the N-terminal amino acid sequence analysis indicated that acidocin 8912 was a peptide composed of presumably 50 amino acids containing a Lys residue at the N-terminus. The purified acidocin 8912 showed a bactericidal effect on sensitive cells but not a bacteriolytic effect.     

Plasmid-associated Bacteriocin Production by and Immunity of Lactobacillus acidophilus TK8912

Lactobacillus acidophilus TK8912 produces an antibacterial substance, designated acidocin 8912, which is active against strains of Lactobacillus and Lactococcus. Of all conditions tested, the production of acidocin 8912 was maximum at 30°C in MRS broth. Acidocin 8912 was stable to heat treatment (120°C for 20min), but completely inactivated by protease treatment. Curing a plasmid pLA103 resulted in the loss of both acidocin 8912 production (Acd⁺) and host immunity (Acd^r). A plasmid-cured strain, TK1–4 (Acd^- Acd⁸), was transformed to Acd⁺Acd^r with the pLA103 plasmid. These results provided the first direct evidence in lactobacilli for involvement of this plasmid in bacteriocin production and immunity.     

Characterization and purification of acidocin CH5, a bacteriocin produced by Lactobacillus acidophilus CH5

AIMS: To characterize and to purify a bacteriocin produced by Lactobacillus acidophilus strain with its activity restricted to Gram-positive bacteria. METHODS AND RESULTS: Native acidocin CH5, a bacteriocin produced by L. acidophilus CH5 an isolate from a dairy starter culture forms in MRS (Oxoid, Basingstoke, UK) broth high-molecular weight aggregates which can dissociate into smaller units (retained by 5 kDa membrane) with higher activity. Acidocin CH5 was purified using combinations of chromatographic methods based on hydrophobic and cation exchange principles and the N-terminal region was sequenced. CONCLUSIONS: Based on our results it is evident that acidocin CH5 belongs, according to bacteriocin classification, to the class II bacteriocins with identical N-terminal amino acid sequence described in the literature previously. SIGNIFICANCE AND IMPACT OF THE STUDY: The study has provided further data on bacteriocin acidocin CH5 from class II with wide spectrum of antimicrobial activity atypical for bacteriocins produced by L. acidophilus sharing the same homology.     

Purification and characterisation of acidocin D20079, a bacteriocin produced by Lactobacillus acidophilus DSM 20079

Bacteriocins are natural antimicrobial agents produced by food fermentative bacteria. Lactobacillus acidophilus DSM 20079 produces a small bacteriocin, with a molecular mass of 6.6 kDa, designated acidocin D20079. This antimicrobial peptide was extremely heat-stable (30 min at 121 degrees C) and was active over a wide pH range. It was found to be sensitive to proteolytic enzymes (trypsin, ficin, pepsin, papain, and proteinase K). Acidocin D20079 has a narrow inhibitory spectrum restricted to the genus Lactobacillus which includes L. sakei NCDO 2714, an organism known to cause anaerobic spoilage of vacuum-packaged meat. Maximum production of acidocin D20079 in MRS broth was detected at pH 6.0, and the peptide was purified by ammonium sulphate precipitation followed by sequential cation exchange and hydrophobic interaction chromatography. Purified acidocin D20079 spontaneously formed spherulite crystals during dialysis. As the N-terminus was found to be blocked for sequencing, matrix-assisted laser desorption/ionization time-of-flight (MALDI-TOF) mass spectrometry was used to determine a partial sequence, and the molecular mass of the bacteriocin in the formed crystals (6.6 kDa). Estimates of the molecular weight of the partially purified peptide, using tricine-SDS-PAGE, in which bacteriocin activity was confirmed by overlayer techniques were in accordance with this value.     

Production and physicochemical characterization of acidocin D20079, a bacteriocin produced by Lactobacillus acidophilus DSM 20079

Lactobacillus acidophilus DSM 20079 is the producer of a novel bacteriocin termed acidocin D20079. In this paper, a partial sequence of this peptide is determined, together with data on its secondary structure. A modification of the MRS-growth medium (replacing the detergent Tween 80 with oleic acid), was shown to improve the production level of the peptide by one order of magnitude, as well as to stabilize the activity level. Addition of a detergent (Tween 20, less interfering in mass spectrometric analysis), was however necessary for solubilization of the purified acidocin D20079. Digestion of the peptide followed by de-novo sequencing of generated fragments, allowed determination of a partial sequence consisting of 39 of the totally estimated 65 residues. Acidocin D20079 has a high content of glycine residues, hydrophobic residues, and acidic residues. No modified amino acids were found. Edman degradation, and C-terminal sequencing failed, suggesting that the peptide may be cyclic, and a novel member of class IIc bacteriocins. Circular dichroism spectroscopy and secondary structure prediction showed random coil conformation in aqueous solution, but secondary structure was induced in the presence of sodium-dodecyl sulfate. The data could be fitted assuming 2–13% of the residues to be in α-helix and 23–27% of the residues to be in β-strand conformation. This indicates that a membrane/membrane-mimicking hydrocarbon–water interface induces an active conformation.     

Characterization and purification of acidocin 1B, a bacteriocin produced by Lactobacillus acidophilus GP1B

In the present study, acidocin 1B, a bacteriocin produced by Lactobacillus acidophilus GP1B, exhibited profound inhibitory activity against a variety of LAB and pathogens, including Gram-negative bacteria, and its mode of action was to destabilize the cell wall, thereby resulting in bactericidal lysis. Acidocin 1B was found to be heat stable, because it lost no activity when it was heated up to 95 degrees C for 60 min. It retained approximately 67% of the initial activity after storage for 30 days at 4 degrees C, and 50% of its initial activity after 30 days at 25 degrees C and 37 degrees C. The molecular mass of acidocin 1B was estimated to be 4214.65 Da by mass spectrometry. Plasmid curing results indicated that a plasmid, designated as pLA1B, seemed to be responsible for both acidocin 1B production and host immunity, and that the pLA1B could be transformed into competent cells of L. acidophilus ATCC 43121 by electroporation. Our findings indicate that the acidocin 1B and its producer strain may have potential value as a biopreservative in food systems.     

Cloning, expression, and nucleotide sequence of the Lactobacillus helveticus 481 gene encoding the bacteriocin helveticin J.

Lactobacillus helveticus 481 produces a 37-kDa bacteriocin called helveticin J. Libraries of chromosomal DNA from L. helveticus were prepared in lambda gt11 and probed for phage-producing fusion proteins that could react with polyclonal helveticin J antibody. Two recombinant phage, HJ1 and HJ4, containing homologous inserts of 350 and 600 bp, respectively, produced proteins that reacted with antibody. These two phage clones specifically hybridized to L. helveticus 481 total genomic DNA but not to DNA from strains that did not produce helveticin J or strains producing unrelated bacteriocins. HJ1 and HJ4 lysogens produced beta-galactosidase fusion proteins that shared similar epitopes with each other and helveticin J. The intact helveticin J gene (hlv) was isolated by screening a library of L. helveticus chromosomal DNA in lambda EMBL3 with the insert DNA from phage HJ4 as a probe. The DNA sequence of a contiguous 3,364-bp region was determined. Two complete open reading frames (ORF), designated ORF2 and ORF3, were identified within the sequenced fragment. The 3' end of another open reading frame, ORF1, was located upstream of ORF2. A noncoding region and a putative promoter were located between ORF1 and ORF2. ORF2 could encode an 11,808-Da protein. The L. helveticus DNA inserts of the HJ1 and HJ4 clones reside within ORF3, which begins 30 bp downstream from the termination codon of ORF2. ORF3 could encode a 37,511-Da protein. Downstream from ORF3, the 5' end of another ORF (ORF4) was found. A Bg/II fragment containing ORF2 and ORF3 was cloned into pGK12, and the recombinant plasmid, pTRK135, was transformed into Lactobacillus acidophilus via electroporation. Transformants carrying pTRK135 produced a bacteriocin that was heat labile and exhibited an acitivity spectrum that was the same as that of helveticin J.     

Isolation, partial characterization and mode of action of acidocin J1229, a bacteriocin produced by Lactobacillus acidophilus JCM 1229

Lactobacillus acidophilus JCM 1229 produces a heat-stable bacteriocin, designated as acidocin J1229, that has a narrow inhibitory spectrum. Production of acidocin J1229 in MRS broth was pH dependent, with maximum activity detected in broth culture maintained at pH 5:0. Acidocin J1229 was purified by ammonium sulphate precipitation and sequential cation exchange and reversed-phase chromatographies. The sequence of the first 24 amino acid residues of the N terminus of acidocin J1229 was determined. The molecular mass of acidocin J1229 as determined by mass spectrometry was 6301 Da. Acidocin J1229 showed a bactericidal effect but not a bacteriolytic effect on sensitive cells. Acidocin J1229 dissipated the membrane potential and the pH gradient in sensitive cells, which affected such proton motive force-dependent processes as amino acid transport. Acidocin J1229 also caused an efflux of glutamate, previously taken up via a unidirectional ATP-driven transport system. Secondary structure prediction revealed the presence of an amphiphilic a-helix region that could form hydrophilic pores. These results suggest that acidocin J1229 is a pore-forming peptide that creates cell membrane channels through the 'barrel-stave'mechanism.     

Production of acidocin B, a bacteriocin of Lactobacillus acidophilus M46 is a plasmid-encoded trait: Plasmid curing, genetic marking by in vivo plasmid integration, and gene transfer

Abstract Plasmid-curing studies suggest that acidocin B production is encoded by the 14-kb plasmid pCV461 in Lactobacillus acidophilus M46. Loss of pCV461 from the original producer strain M46 did not coincide with loss of immunity to acidocin B. Bacteriocin activity determination after SDS-PAGE showed that a substance of 2.4 kDa, absent in the culture supernatant of the mutant strain M46A2, lacking pCV461, represented acidocin B activity. In order to introduce a positive selection criterion, pCV461 was marked in vivo by the erythromycin resistance marker of pE194, present on pUC19 containing a 1.4-kb Hin dIII fragment of pCV461, after plasmid integration. Introduction of this recombinant plasmid into the mutant strain M46A2 or Lactobacillus plantarum resulted in erythromycin-resistant, acidocin B-producing transformants, showing unambiguously that acidocin B is encoded by pCV461.     

Cloning, nucleotide sequence, and expression of the gene encoding the bacteriocin boticin B from Clostridium botulinum strain 213B

Boticin B is a heat-stable bacteriocin produced by Clostridium botulinum strain 213B that has inhibitory activity against various strains of C. botulinum and related clostridia. The gene encoding the bacteriocin was localized to a 3.0-kb HindIII fragment of an 18. 8-kb plasmid, cloned, and sequenced. DNA sequencing revealed the boticin B structural gene, btcB, to be an open reading frame encoding 50 amino acids. A C. botulinum strain 62A transconjugant containing the HindIII fragment inserted into a clostridial shuttle vector expressed boticin B, although at much lower levels than those observed in C. botulinum 213B. To our knowledge, this is the first demonstration and characterization of a bacteriocin from toxigenic group I C. botulinum.     

Antimicrobial activity of lactobacilli: preliminary characterization and optimization of production of acidocin B, a novel bacteriocin produced by Lactobacillus acidophilus M46

Approximately 1000 lactobacillus strains were isolated and screened for the production of antimicrobial activity, using a target panel of spoilage organisms and pathogens. Only eight positive strains were found; two of these were studied in more detail. Lactobacillus salivarius M7 produces the new broad spectrum bacteriocin salivaricin B which inhibits the growth of Listeria monocytogenes, Bacillus cereus, Brochothrix thermosphacta, Enterococcus faecalis and many lactobacilli. A new atypical bacteriocin produced by Lact. acidophilus M46, acidocin B, combines the inhibition of Clostridium sporogenes with a very narrow activity spectrum within the genus Lactobacillus and was selected for further characterization. Acidocin B is sensitive to trypsin, heat-stable (80°C for 20 min) and can be extracted from the culture supernatant fluid with butanol. Native acidocin B occurs as a large molecular weight complex (100 kDa), while with SDS-PAGE the partly purified activity migrates as a peptide of 2·4 kDa. Optimization of the cultivation conditions resulted in an eightfold increase of the amount of acidocin B produced during growth. Growth is not necessary for acidocin B production; washed producer cells can synthesize the bacteriocin in a chemically defined production medium. The application potential of acidocin B is discussed.     

Detection and activity of lactacin B, a bacteriocin produced by Lactobacillus acidophilus

A total of 52 strains of Lactobacillus acidophilus were examined for production of bacteriocins. A majority (63%) demonstrated inhibitory activity against all members of a four-species grouping of Lactobacillus leichmannii, Lactobacillus bulgaricus, Lactobacillus helveticus, and Lactobacillus lactis. Four L. acidophilus strains with this activity also inhibited Streptococcus faecalis and Lactobacillus fermentum, suggesting a second system of antagonism. Under conditions eliminating the effects of organic acids and hydrogen peroxide, no inhibition of other gram-positive or -negative genera was demonstrated by L. acidophilus. The agent produced by L. acidophilus N2 and responsible for inhibition of L. leichmannii, L. bulgaricus, L. helveticus, and L. lactis was investigated. Ultrafiltration studies indicated a molecular weight of approximately 100,000 for the crude inhibitor. The agent was sensitive to proteolytic enzymes and retained full activity after 60 min at 100 degrees C (pH 5). Activity against sensitive cells was bactericidal but not bacteriolytic. These characteristics identified the inhibitory agent as a bacteriocin, designated lactacin B. Examination of strains of L. acidophilus within the six homology groupings of Johnson et al. (Int. J. Syst. Bacteriol. 30:53-68, 1980) demonstrated that production of the bacteriocin lactacin B could not be used in classification of neotype L. acidophilus strains. However, the usefulness of employing sensitivity to lactacin B in classification of dairy lactobacilli is suggested.     

Cloning and nucleotide sequence of a gene from Lactobacillus sake Lb706 necessary for sakacin A production and immunity.

Sakacin A is an antilisterial bacteriocin produced by Lactobacillus sake Lb706. In order to identify genes involved in sakacin A production and immunity, the plasmid fraction of L. sake Lb706 was shotgun cloned directly into a sakacin A-nonproducing and -sensitive variant, L. sake Lb706-B, by using the broad-host-range vector pVS2. Two clones that produced sakacin A and were immune to the bacteriocin were obtained. A DNA fragment of approximately 1.8 kb, derived from a 60-kb plasmid of strain Lb706 and present in the inserts of both clones, was necessary for restoration of sakacin A production and immunity in strain Lb706-B. The sequence of the 1.8-kb fragment from one of the clones was determined. It contained one large open reading frame, designated sakB, potentially encoding a protein of 430 amino acid residues. Hybridization and nucleotide sequence analyses revealed that the cloned sakB complemented a mutated copy of sakB present in strain Lb706-B. The sakB gene mapped 1.6 kb from the previously cloned structural gene for sakacin A (sakA) on the 60-kb plasmid. The putative SakB protein shared 22% amino acid sequence identity (51% similarity if conservative changes are considered) to AgrB, the deduced amino acid sequence of the Staphylococcus aureus gene agrB. The polycistronic agr (accessory gene regulator) locus is involved in the regulation of exoprotein synthesis in S. aureus. Similar to the AgrB protein, SakB had some features in common with a family of transmembrane histidine protein kinases, involved in various adaptive response systems of bacteria.(ABSTRACT TRUNCATED AT 250 WORDS)     

Cloning and nucleotide sequence of a carbomycin-resistance gene from Streptomyces thermotolerans

Two plasmids (pOJ158 and pOJ159) containing DNA fragments from the carbomycin(Cb)-producing strain Streptomyces thermotolerans were identified in Streptomyces griseofuscus based on their ability to confer resistance to Cb. The Cb-resistance determinants on pOJ158 and pOJ159 were designated carA and carB, respectively. In S. griseofuscus, pOJ159 also confers resistance to spiramycin, rosaramicin, lincomycin, and vernamycin B, but not to tylosin; in Streptomyces lividans, pOJ159 additionally confers resistance to erythromycin and oleandomycin. The carB gene was localized on pOJ159 to a 1.25-kb region whose nucleotide sequence was determined. The sequence has a G + C content of 68% and contains the coding sequence for carB and portions of the 5' and 3' untranslated regions. A comparison of the amino acid sequence of the protein encoded by carB (as deduced from the nucleotide sequence) with the deduced amino acid sequence of the RNA methylase from Streptomyces erythraeus (encoded by ermE) revealed extensive homology, suggesting that carB also encodes an RNA methylase. The region 5' to the coding sequence does not contain a small ORF or regions of complementarity that are commonly associated with translationally regulated macrolide-lincosamide-streptogramin B resistance genes. The 3' untranslated region contains an inverted repeat sequence that potentially can form a stable RNA stem-loop structure with a calculated delta G of -70 kcal.     

Cloning, nucleotide sequence, and expression of the nitroreductase gene from Enterobacter cloacae

The "classical" nitroreductases of enteric bacteria are flavoproteins which catalyze the reduction of a variety of nitroaromatic compounds to metabolites which are highly toxic, mutagenic, or carcinogenic. The gene for the nitroreductase Enterobacter cloacae has now been cloned using an antibody specific to this protein. The nucleotide sequence of the structural gene and flanking regions are reported. Sequence analysis indicates that this gene belongs to a gene family of flavoproteins which have not been previously described. Analysis of the 5'-untranslated region reveals the presence of putative regulatory elements which may be involved in the modulation of the expression of this enzyme. The cloned gene was placed under the control of a T7 promoter for overexpression of the protein in Escherichia coli. The expressed recombinant protein was purified to homogeneity and exhibited physical, spectral, and catalytic properties identical to the protein isolated from E. cloacae.