Evaluation of the interaction of peptides with Cu(II), Ni(II), and Zn(II) by high-performance immobilized metal ion affinity chromatography

High-performance immobilized metal ion affinity chromatography was utilized to evaluate the adsorption properties of 67 synthetic, biologically active, peptides ranging in size from 5 to 42 residues. The metal ions, Cu(II), Ni(II) and Zn(II), were immobilized by iminodiacetic acid (IDA) coupled to TSK gel 5PW (10 microns). Two types of gradient elution (imidazole and pH) were used to evaluate peptide retention by the metal ions. A decreasing pH gradient and an increasing imidazole gradient eluted the peptides in similar order. IDA-Cu(II) and IDA-Zn(II) showed very similar selectivities for the peptides analyzed; however, IDA-Zn(II) displayed a weaker affinity for the peptides. IDA-Ni(II) showed a slightly different pattern of selectivity. Peptide adsorption effects contributed by the metal-free gel matrix were found to be relatively minor. The concentration and type of salt included in the mobile phase could affect the relative affinities of the peptides for the immobilized metal ions. Retention coefficients were assigned to individual amino acid residues by multiple linear regression analysis. Histidine showed the largest positive correlation with retention, followed by aromatic amino acid residues. Modified N-terminal residues resulted in negative contributions to retention. Analyses of peptide amino acid composition alone allowed prediction of peptide retention behavior on immobilized metal ion affinity columns.     

High-performance analytical applications of immobilized metal ion affinity chromatography

The separation of three sets of standard protein mixtures on a high-performance immobilized metal ion affinity chromatography (HP-IMAC) column by elution with linear gradients of imidazole is described. The affinity of the test proteins for the immobilized metal ions follows the order Cu2+ greater than Ni2+ greater than Zn2+. The iminodiacetic acid-Cu2+ column gives the best resolution of all three protein mixtures and is the only immobilized metal ion column that can be used for elution of absorbed proteins with a decreasing pH gradient. An application of HP-IMAC for the separation of monoclonal IgG from mouse ascites fluid is also outlined. This versatile separation method is thus suitable for both analytical and preparative separations of proteins and peptides resulting in high recoveries and good reproducibility. The leakage of immobilized metal ions from the TSK gel chelate-5PW is apparent if the column is eluted by buffers containing low concentrations of (i) glycine or (ii) primary amines at round neutral pH. Considerable amounts of immobilized Zn2+ and Ni2+ ions also leak from the column by washing with buffers of pH 4.5 or lower. However, all three immobilized metal ions are stable toward exposure to low concentrations of imidazole (up to 50 mM) in phosphate buffers between pH 6.5 and 8.0. Adsorbed proteins could thus be eluted conveniently by using linear gradients of imidazole to give reproducible results. Moreover, this elution procedure made it possible to use the IMAC columns for repeated runs without the need for regeneration and recharging of the columns with fresh metal ions after each use.     

Facile analysis and purification of deblocked N-terminal pyroglutamyl peptides with a strong cation-exchange sulfoethyl aspartamide column

A high-performance strong cation-exchange Sulfoethyl Aspartamide column was used to analyze and purify five N-terminal pyroglutamyl peptides after treatment with Pyroglutamate Aminopeptidase. The resulting deblocked N-1 peptides possess an increased positive charge and are therefore retained to a greater extent by the column. Salt gradient elution in a pH 3 mobile phase was then used to recover the desired peptides and the purified deblocked peptides were directly subjected to N-terminal sequence analysis. The same digests were also chromatographed on a C18 reversed-phase column using standard trifluoroacetic acid-acetonitrile gradient elution. The elution order for the parent peptide and the N-1 peptide on the reversed-phase column was reversed from that on the Sulfoethyl Aspartamide column and the resolution of the two peptides obtained on the reversed-phase column was less than that observed on the cation-exchange column. In addition, the Sulfoethyl Aspartamide column was shown to be useful to monitor the extent of N-terminal glutamine cyclization formed during peptide purification and storage.     

Development of metal affinity-immobilized liposome chromatography and its basic characteristics

Metal affinity-immobilized liposome chromatography (MA-ILC) was newly developed as a chromatographic technique to separate and analyze peptides. The MA-ILC matrix gel was first prepared by immobilizing liposomes modified with functional ligands. The functional ligand used to adsorb metal ions was N-hexadecyl iminodiacetic acid (HIDA), which is obtained by attaching a long alkyl chain to an iminodiacetic acid (IDA). Cu(II) ion was first adsorbed on the gel matrix through its complex formation with the HIDA on the surface of the immobilized liposome. Synthetic peptides of various types ranging in size from 5 to 40 residues were then used, and their retention properties on the MA-ILC were evaluated. The retention property of peptides on the MA-ILC by using a usual imidazole elution was compared with the retention property in the case of the immobilized metal affinity chromatography (IMAC) and an immobilized liposome chromatography (ILC). It was found that the retention property of peptides on the MA-ILC has the features of both the IMAC and the ILC; the retention ability of peptides depends on both the number of histidine residues in peptides and the liposome membrane affinity of the peptides. Histidine and tryptophan residues among amino acid residues in peptides indicated a high contribution coefficient for the peptide retention on the MA-ILC, probably due to their metal ion and membrane interaction properties, respectively.     

Chelating peptide-immobilized metal ion affinity chromatography. A new concept in affinity chromatography for recombinant proteins

We report our experimental results supporting the hypothesis that a specific metal-chelating peptide (CP) on the NH2 terminus of a protein can be used to purify that protein using immobilized metal ion affinity chromatography (IMAC). The potential utility of this approach resides with recombinant proteins since the nucleotide sequence that codes for the protein can be extended to include codons for the chelating peptide and thereby generate the gene for a chimeric CP-protein that can be cloned, expressed, and affinity-purified with immobilized metal ions. The chelating peptide purification handle could then be removed chemically or enzymatically after purification has been achieved to generate a protein with the natural amino acid sequence. The feasibility of using a chelating peptide as a purification handle has been demonstrated using a leuteinizing hormone-releasing hormone (LHRH) analog, 2-10 LHRH, which contains the previously identified chelating peptide, His-Trp, on the NH2 terminus. 2-10 LHRH had a high affinity for a Ni(II) IMAC column due to the NH2-terminal dipeptide sequence His-Trp, forming a coordination complex with Ni(II), whereas the controls, 3-10 LHRH and 4-10 LHRH, lacking the CP sequence, did not bind. Furthermore, 2-10 LHRH could be purified from a mixture of histidine-containing peptides on a Ni(II) IMAC column in one step. His-Trp proinsulin was used as a model of a recombinant CP-protein. The S-sulfonates of His-Trp-proinsulin and proinsulin were isolated from Escherichia coli engineered to overproduce these proteins as trpLE' fusion proteins. His-Trp-proinsulin(SSO3-)6 had a higher affinity for immobilized Ni(II) than proinsulin (SSO3-)6. Both proteins were eluted by decreasing the pH or by introducing a displacing ligand into the buffer. Ni(II) eluted from the column with much higher concentrations of displacing ligand than the proteins.     

On-line capillary column immobilised metal affinity chromatography/electrospray ionisation mass spectrometry for the selective analysis of histidine-containing peptides

Capillary column immobilised metal affinity chromatography (IMAC) has been combined on-line with electrospray ionisation/quadrupole time-of-flight mass spectrometry for the fractionation of histidine-containing peptides. IMAC beads (Poros 20MC, 20 microm) containing imidodiacetate chelating groups on a cross-linked poly(styrene-divinylbenzene) support were packed into a fused silica column (250 microm i.d.), which was interfaced to the electrospray ion source of the spectrometer. A Cu(II) activated column was used to isolate histidine-containing peptides from tryptic and other peptide mixtures with an average breakthrough of 9.1%, to reduce the complexity of the mass spectral analysis. The analysis cycle time was reduced to less than 15 min, at an optimum flow rate of 7.5 microL/min, without sacrificing peptide selectivity. Direct coupling of capillary IMAC with MS allows on-line separation, using MS compatible loading and elution buffers, and detection in a high-throughput fashion when compared to off-line strategies.     

High-performance liquid chromatography with concanavalin A immobilized by metal interactions on the stationary phase

Concanavalin A (Con A) was immobilized via metal interactions on macroporous, microparticulate silica support having covalently bound iminodiacetic acid functions (IDA-silica) chelated with Cu(II) at the surface. The amount of copper and of Con A in the column could readily be controlled by the conditions used for chelating the metal by IDA-silica and for immobilization of the lectin. The retention behavior of columns packed with the stationary phase did not change under a wide range of elution conditions, indicating no loss of immobilized lectin. However, the Con A proper could readily be removed from the column at pH 3.0 or together with Cu(II) by perfusion with EDTA at neutral pH. Columns containing Con A immobilized by this technique exhibited dual retention behavior for proteins, glycoproteins, and carbohydrates according to the pertinent glycan-lectin or protein-metal interactions. The glycoproteins, peroxidase and alpha 1-acid glycoprotein, were retained by the Con A moiety and eluted with eluents containing competing sugars, whereas the proteins, beta-lactoglobulin, alpha-chymotrypsinogen A, and ribonuclease A and B were retained by the chelated copper and were eluted and separated with eluents containing sodium chloride or borate. Binding constants of glycosides on the immobilized Con A were evaluated chromatographically and found to be one-third to two-thirds those reported in the literature on the basis of experiments in free solution.     

Two-Dimensional Immobilized Metal Affinity Electrophoresis for Capturing a Phosphoprotein

A two-dimensional immobilized metal affinity electrophoresis method is described here. In this method, ferric ions are immobilized in the second-dimensional polyacrylamide gel to extract the phosphoprotein β-casein from a mixture containing proteins with a broad range of pI and MW. Native 7.5–15% gradient tris-glycine gel with SDS tris-glycine gel running buffer are used so that proteins can be separated according to their molecular mass in the second dimension.     

Nanoengineered analytical immobilized metal affinity chromatography stationary phase by atom transfer radical polymerization: separation of synthetic prion peptides

Atom transfer radical polymerization (ATRP) was employed to create isolated, metal-containing nanoparticles on the surface of nonporous polymeric beads with the goal of developing a new immobilized metal affinity chromatography (IMAC) stationary phase for separating prion peptides and proteins. Transmission electron microscopy was used to visualize nanoparticles on the substrate surface. Individual ferritin molecules were also visualized as ferritin-nanoparticle complexes. The column's resolving power was tested by synthesizing peptide analogs to the copper binding region of prion protein and injecting mixtures of these analogs onto the column. As expected, the column was capable of separating prion-related peptides differing in number of octapeptide repeat units (PHGGGWGQ), (PHGGGWGQ)(2), and (PHGGGWGQ)(4). Unexpectedly, the column could also resolve peptides containing the same number of repeats but differing only in the presence of a hydrophilic tail, Q-->A substitution, or amide nitrogen methylation.     

Proton, calcium, and magnesium binding by peptides containing gamma-carboxyglutamic acid.

gamma-Carboxyglutamic acid (Gla) is believed to bind Ca [II] ions and Mg [II] ions in prothrombin and other coagulation proteins. Binding constants for H+, Ca [II] ions, and Mg [II] ions to Gla-containing peptides are determined using pH and ion selective electrode titrations. The binding constants for peptides containing a single Gla residue are similar to the constants for malonic acid. Peptides containing two Gla residues in sequence (di-Gla peptides) bind Ca [II] ions and Mg [II] ions more strongly. KMgL for the di-Gla peptides is similar to the site-binding constant for Ca [II] ions in denatured BF1. These di-Gla peptides may be useful analogs for metal binding by the disordered Gla domain in BF1.     

Adsorption study of metal ions onto crosslinked seaweed Laminaria japonica

An efficient and cost effective non-conventional adsorbent has been prepared from seaweed Laminaria japonica by crosslinking with epichlorohydrin. Its adsorption behavior for trivalent and divalent metal ions was studied and it was found to exhibit excellent selectivity towards several metal ions. As a typical example, binary mixture of Pb(II) and Zn(II) was studied by using a packed column, indicating that the Pb(II) ion can be easily separated from its mixture with a concentration factor of 74 times. The maximum adsorption capacity for Pb(II), Cd(II), Fe(III) was found to be 1.35, 1.1, 1.53 mol kg(-1), respectively, while 0.8 7 mol kg(-1) for both La(III) and Ce(III) from the single metal ion solution according to the adsorption isotherm. The obtained values are comparable to the commercially available synthetic chelating resins.     

Chromatography of peptides related to beta-endorphin

Chromatographic procedures are described here for the resolution of beta-endorphin and its related peptides at picomolar concentration. Initially gel filtration is carried out on Sephadex G75 in 50% acetic acid, providing peptides with the approximate molecular size of beta-endorphin. The group of beta-endorphin-related peptides is resolved by ion-exchange chromatography on the pyridinium form of sulfopropyl Sephadex C25 in the presence of 50% acetic acid. The addition of 125I-labeled marker peptides prior to chromatography allows the recovery of each peptide to be calculated and provides a guide for identifying the elution positions of the endogenous peptides. Additional resolution can be obtained by high-pressure liquid chromatography (HPLC) of the sulfoxide forms of the peptides on muBondapak C18 under acidic conditions. The advantages and disadvantages of ion-exchange chromatography and high-pressure liquid chromatography are discussed for the purification of small amounts of basic, hydrophobic peptides.     

Assessment of cisplatin reactivity with peptides and proteins using reverse-phase high-performance liquid chromatography and flameless atomic absorption spectroscopy

Methodology based on gradient elution reverse-phase high-performance liquid chromatography has been developed to permit monitoring of reactions of cisplatin, a noble metal-containing antineoplastic agent, with peptides, polypeptides, and proteins. Such reactions have been implicated in biotransformation of eisplatin. Specificity is provided by both the chromatographic column and the use of on-line uv and off-line atomic absorption spectroscopic detectors placed in series postcolumn. chromatographic conditions were optimized to maximize resolution of nitrogenous components. In some cases, however, resolution of platinum-containing components and those devoid of metal was not possible. This chromatographic overlap could be deconvoluted by sequentially monitoring the eluant with a uv detector (responsive to all proteinaceous material) and on atomic absorption spectrophotometer (specific for platinum detection). This technique has been applied to a kinetic investigation of cisplatin reactivity toward Met-enkephalin.     

Hydroxyapatite affinity chromatography for the highly selective enrichment of mono‐ and multi‐phosphorylated peptides in phosphoproteome analysis

The most challenging analytical task facing phosphoproteome determination requires the isolation of phosphorylated peptides from the myriad of unphosphorylated species. In the past, several strategies for phosphopeptide isolation have been proposed in combination with subsequent mass spectrometric investigations. Among these techniques, immobilized metal affinity chromatography and titanium dioxide have been recognized as the most effective. Here, we present an alternative method for the enrichment of phosphopeptides based on hydroxyapatite (HAP) chromatography. By taking advantage of the strong interaction of HAP with phosphate and calcium ions, we developed an efficient method for the selective separation and fractionation of phosphorylated peptides. The effectiveness and efficiency of recovery for this procedure was assayed using tryptic digests of standard phosphorylated protein mixtures. Based on the higher affinity of multi‐phosphorylated peptides for HAP surfaces, the introduction of a phosphate buffer gradient for stepwise peptide elution resulted in the separation of mono‐, di‐, tri‐, and multi‐phosphorylated peptides. Thus, we demonstrated that this technique is highly selective and independent of the degree of peptide phosphorylation.     

An examination of the binding behavior of histidine-containing peptides with immobilized metal complexes derived from the macrocyclic ligand, 1,4,7-triazacyclononane

In this study, two different experimental approaches have been employed to examine the binding behavior of histidine-containing peptides with metal ion complexes derived from the macrocyclic ligand 1,4,7-triazacyclononane (tacn). Firstly, a molecular modeling approach has been employed to derive the strain energies for test peptide sequences that have a predicted propensity to readily adopt an α-helical conformation. To this end, binuclear metal complexes were examined with peptides containing two histidine residues in different locations in a pair of peptides of the same composition but different sequence. These modeling results indicate that there are no energetic constraints for two-point binding to occur with dicopper(II) binuclear complexes when two histidine residues are appropriately placed in an α-helical conformation. Secondly, binding experiments were carried out to establish the effect of one or more histidine residues within a peptide sequence on the affinity of a peptide for these Cu(II)–tacn derived binuclear complexes when immobilized onto a chromatographic support material. The results confirm that for all chelating systems, higher affinity is achieved as the histidine number in the peptide structure increases, although the relative location of the histidine residues in these small peptides did not introduce a significant constraint to the conformation on interacting with the immobilized Cu(II) binuclear complexes.     

Purification of protected syntheic peptides by preparative high performance liquid chromatography on silica gel 60.

A simple preparative system is described for rapid and efficient purification of protected synthetic peptides on a gram scale by high performance liquid chromatography on prepacked silica gel 60 columns. A variety of protected peptides up to tetradecapeptides have been chromatographed at pressures of 50 to 150 psi and obtained in analytically pure from within 2 to 4 h. With such commonly used protecting groups as N-benzyloxycarbonyl (Z), N-2-(p-biphenylyl)-2-propyloxycarbonyl (Bpoc), N-t-butyloxycarbonyl (Boc), O- and S-t-butyl (But), and S-acetamidomethyl (Acm), compounds were sufficiently soluble in chloroform, alcohols, acetic acid, or mixtures of these solvents for column loading. Dimethylformamide was also used as a solvent for loading. Solvent systems for column elution in isocratic, stepwise, or gradient modes were composed of chloroform, isopropanol, ethanol, or methanol and acetic acid in ratios that differed for each protected peptide depending on Rf values on t.l.c. plates. A simple chromatography is described which was self-assembled using standard instruments commonly in use in most laboratories. A shut-off valve was designed to prevent loss of material between fractions.     

Apparatus and method for preparative gel electrophoresis

A new apparatus for preparative gel electrophoresis with continuous elution which includes a miniaturized electrode and elution chamber system is described. The design provides high resolution, high yield, applicability for small and large amounts of peptide material, and easy operation. Furthermore, the apparatus enables a very accurate gel column or gel gradient to be formed. A method for preparative gel electrophoresis in sodium dodecyl sulfate which allows the purification of peptides and proteins without concurrently modifying tryptophane residues or blocking N-terminal α-amino groups is also described.     

Anti-free-radical properties of the peptide fractions isolated from string bean by immobilized metal ion affinity chromatography

In this study, peptides and proteins extracted from string bean with 1% TCA were separated by chromatography on columns with copper ions immobilized through IDA and o-phosphoserine OPS. Protein and peptide concentrations and the anti-free-radical properties of the isolated fractions were determined. Identification was obtained using mass spectrometry. The anti-free- radical activity of all analyzed samples was determined using the DPPH test, and was found to depend on reaction time, choice of chelating agent and the order in which the fractions were eluted from the column.     

Separation of peptides by reverse-phase high-performance liquid chromatography using propyl- and cyanopropylsilyl supports

The separation of peptides and proteins by reverse-phase high-performance liquid chromatography with cyanopropylsilyl and large-pore propylsilyl supports, together with aqueous trifluoroacetic acid/acetonitrile gradients, was studied. Operating parameters (trifluoroacetic acid concentration, flow rate, and gradient slope) were evaluated using different enzymatic digests of horse cytochrome c and bovine serum albumin. Peptides ranging in size from five amino acids to 68 kDa could be separated on the propylsilyl column in a single chromatographic run. The cyanopropylsilyl column is suitable as a supplement to the use of the large-pore column for medium size (5-20 amino acids) peptides. The chromatographic supports and conditions presented here offer a simple, sensitive, and rapid separation system for a wide size range of peptides and proteins. They extend the versatility of separation methodology for these molecules.     

Sorption of heavy metals from electroplating effluent using immobilized biomass Trichoderma viride in a continuous packed-bed column

The sorption of heavy metals ions by immobilized Trichoderma viride biomass in a packed-bed column was studied. Fungal biomass T. viride was immobilized to Ca-alginate used for removal of Cr(VI), Ni(II) and Zn(II) ions from synthetic solutions and electroplating effluent. The experiments were conducted to study the effect of important design parameters such as bed height, flow rate and initial concentration of metal ions. The maximum sorption capacity was observed at flow rate 5 ml/min, bed height 20 cm and metal ions concentration 50 mg/L with immobilized biomass. Whereas, breakthrough time and saturation time decreased with increase flow rate and metal ions concentration and an inverse condition was found in bed height. The bed depth service time (BDST) Adams-Bohart model was used to analyze the experimental data. The regeneration efficiency was observed 40.1%, 75% and 53% for Cr(VI), Ni(II) and Zn(II) without any significant alteration in sorption capacity after 5th sorption-desorption cycles.