Analysis of greenhouse gas emissions related to aluminium transport applications

Background, aim and scope

Climate change is a subject of growing global concern. Based on International Energy Agency (IEA 2004) research, about 19% of the greenhouse gas emissions from fuel combustion are generated by the transportation sector, and its share is likely to grow. Significant increases in the vehicles fleets are expected in particular in China, India, the Middle East and Latin America. As a result, reducing vehicle fuel consumption is most essential for the future. The reduction of the vehicle weight, the introduction of improved engine technologies, lower air friction, better lubricants, etc. are established methods of improving fuel efficiency, reducing energy consumption and greenhouse gas emissions. Continued progress will be required along all these fronts with light-weighting being one of the most promising options for the global transport sector. This paper quantifies greenhouse gas savings realised from light-weighting cars with aluminium based on life cycle assessment methodology. The study uses a pragmatic approach to assess mass reduction by comparing specific examples of components meeting identical performance criteria. The four examples presented in this analysis come from practical applications of aluminium. For each case study, the vehicle manufacturer has supplied the respective masses of the aluminium and the alternative component.

Material and methods

A full life cycle assessment with regards to greenhouse gas emissions and savings has been carried out for different aluminium applications in cars as compared to the same applications in steel or cast iron. The case studies reference real cases, where aluminium is actually used in series production. The studies are based on a greenhouse gas lifecycle model, which has been developed following the ISO standard 14040 framework. For each component, sensitivity analysis is applied to determine the impact of lifetime driving distance, driving characteristics (impact of air friction) and recycling rate.

Results

Life cycle results show that in automotive applications, each kilogram of aluminium replacing mild steel, cast iron or high strength steel saves, depending on the specific case (bumper and motor block of a compact car, front hood of a large family car, body-in white of a luxury car), between 13 and 20 kg of greenhouse gas emissions.

Discussion

The performed sensitivity analysis finds that even with ‘worst case’ scenarios savings are still significant.

Conclusions

The results not only demonstrate significant benefits of aluminium with regard to greenhouse gas savings but also show that these are very sensitive to variations of the recycling rate, the life-time driving distance and the driving behaviour.

Recommendations and perspectives

Good care is needed to gather life-cycle data and to make informed estimates, where no data are available. Furthermore, greenhouse gas savings for additional components should be calculated using this life cycle model to sustain the findings.

     

Developing breeding schemes to assist mitigation of greenhouse gas emissions

Genetic improvement of livestock is a particularly effective technology, producing permanent and cumulative changes in performance. This paper highlights some of the options for including mitigation in livestock breeding schemes, focusing on ruminant species, and details three routes through which genetic improvement can help to reduce emissions per kg product via: (i) improving productivity and efficiency, (ii) reducing wastage in the farming system and (iii) directly selecting on emissions, if or when these are measurable. Selecting on traits that improve the efficiency of the system (e.g. residual feed intake, longevity) will have a favourable effect on the overall emissions from the system. Specific examples of how genetic selection will have a favourable effect on emissions for UK dairy systems are described. The development of breeding schemes that incorporate environmental concerns is both desirable and possible. An example of how economic valuation of public good outcomes can be incorporated into UK dairy selection indices is given. This paper focuses on genetic selection tools using, on the whole, currently available traits and tools. However, new direct and indirect measurement techniques for emissions will improve the potential to reduce emissions by genetic selection. The complexities of global forces on defining selection objectives are also highlighted.     

UK emissions of the greenhouse gas nitrous oxide

Signatories of the Kyoto Protocol are obliged to submit annual accounts of their anthropogenic greenhouse gas emissions, which include nitrous oxide (N(2)O). Emissions from the sectors industry (3.8 Gg), energy (14.4 Gg), agriculture (86.8 Gg), wastewater (4.4 Gg), land use, land-use change and forestry (2.1 Gg) can be calculated by multiplying activity data (i.e. amount of fertilizer applied, animal numbers) with simple emission factors (Tier 1 approach), which are generally applied across wide geographical regions. The agricultural sector is the largest anthropogenic source of N(2)O in many countries and responsible for 75 per cent of UK N(2)O emissions. Microbial N(2)O production in nitrogen-fertilized soils (27.6 Gg), nitrogen-enriched waters (24.2 Gg) and manure storage systems (6.4 Gg) dominate agricultural emission budgets. For the agricultural sector, the Tier 1 emission factor approach is too simplistic to reflect local variations in climate, ecosystems and management, and is unable to take into account some of the mitigation strategies applied. This paper reviews deviations of observed emissions from those calculated using the simple emission factor approach for all anthropogenic sectors, briefly discusses the need to adopt specific emission factors that reflect regional variability in climate, soil type and management, and explains how bottom-up emission inventories can be verified by top-down modelling.     

Estimation of greenhouse gas emissions from sewer pipeline system

Purpose

The aim of this study was to estimate the total greenhouse gas (GHG) emissions generated from whole life cycle stages of a sewer pipeline system and suggest the strategies to mitigate GHG emissions from the system.

Methods

The process-based life cycle assessment (LCA) with a city-scale inventory database of a sewer pipeline system was conducted. The GHG emissions (direct, indirect, and embodied) generated from a sewer pipeline system in Daejeon Metropolitan City (DMC), South Korea, were estimated for a case study. The potential improvement actions which can mitigate GHG emissions were evaluated through a scenario analysis based on a sensitivity analysis.

Results and discussion

The amount of GHG emissions varied with the size (150, 300, 450, 700, and 900 mm) and materials (polyvinyl chloride (PVC), polyethylene (PE), concrete, and cast iron) of the pipeline. Pipes with smaller diameter emitted less GHG, and the concrete pipe generated lower amount of GHG than pipes made from other materials. The case study demonstrated that the operation (OP) stage (3.67 × 10⁴ t CO₂eq year^?1, 64.9%) is the most significant for total GHG emissions (5.65 × 10⁴ t CO₂eq year^?1) because a huge amount of CH₄ (3.51 × 10⁴ t CO₂eq year^?1) can be generated at the stage due to biofilm reaction in the inner surface of pipeline. Mitigation of CH₄ emissions by reducing hydraulic retention time (HRT), optimizing surface area-to-volume (A/V) ratio of pipes, and lowering biofilm reaction during the OP stage could be effective ways to reduce total GHG emissions from the sewer pipeline system. For the rehabilitation of sewer pipeline system in DMC, the use of small diameter pipe, combination of pipe materials, and periodic maintenance activities are suggested as suitable strategies that could mitigate GHG emissions.

Conclusions

This study demonstrated the usability and appropriateness of the process-based LCA providing effective GHG mitigation strategies at a city-scale sewer pipeline system. The results obtained from this study could be applied to the development of comprehensive models which can precisely estimate all GHG emissions generated from sewer pipeline and other urban environmental systems.

     

Reducing greenhouse gas emissions of a heterogeneous vehicle fleet

Recent research on the vehicle routing problem attempts to integrate so-called “green” aspects into classical planning models. The minimization of transport-related emissions (especially CO₂) instead of driving distances is an important integration approach. Within this paper, we propose an approach which is focusing on the reduction of CO₂ emissions caused by transportation. Based on the observation that vehicles with different maximal payload values have different payload-dependent fuel consumption characteristics, we integrate into Dantzig’s classical vehicle routing model the option of choosing vehicles of different size for route fulfillment. Then, the Emission Minimization Vehicle Routing Problem with Vehicle Categories (EVRP-VC) is introduced. It aims at minimizing the fuel consumption, respectively CO₂ emissions instead of the driving distances. Comprehensive computational experiments with CPLEX are conducted to evaluate the EVRP-VC. A major finding is that the quantity of fuel needed to serve a given request portfolio can be reduced tremendously by using an inhomogeneous fleet with vehicles of different size.     

Spatial greenhouse gas emissions from US county corn production

Purpose

Stakeholders from across supply chains have been prompted to explore ways to reduce the environmental burdens of corn production. To effectively manage these environmental impacts, spatially explicit information accounting for the differences in growing conditions and production practices across the production landscape is essential, allowing for high impact intensity corn to be identified and prioritized for improvement. To support these sustainability efforts, this study examines the spatially explicit life cycle greenhouse gas emissions of US county corn production, providing the most comprehensive assessment to date.

Methods

A streamlined spatial life cycle assessment is conducted, focusing on the three key hotspots of corn production for spatial differentiation at the county scale across the contiguous USA, accounting for almost 60% of total average cradle-to-farm gate impacts. Variations in nitrogen fertilization types and rates, N₂O emission rates, and irrigation emission rates are specifically revealed. Spatially distinguished hotspot inputs and related emissions are combined with static national average emission estimates from all other inputs used in corn production to gain a full picture and understand the relative contributions to total cradle-to gate impacts.

Results and discussion

Results show significant variation across corn producing counties, states, and regions. High impact priority locations are highlighted and key contributors of impact for each location are illuminated, providing critical information on the spatially explicit levers to reduce impacts. Results increase the generalizability of emission estimates using expected yields to characterize emission intensity, enabling more practical integration into company supply chain sustainability assessments to align with the time horizons in which decisions are made.

Conclusions

Streamlined life cycle assessment methods are an effective way to characterize spatial heterogeneity around key contributors of impact, helping deliver the necessary information for companies, stakeholders, and policy makers to target their influence to reduce these emissions through various engagement efforts.

     

Updated and harmonised greenhouse gas emissions for crop inventories

Purpose

The emission of greenhouse gases (GHG) is a key criterion in the environmental assessment of biofuels. Life cycle inventories taking into account the latest methodological developments are an essential prerequisite for this assessment. In the last years, substantial progresses in the modelling of nitrogen emissions relevant for the climate as well as in modelling the emissions from land use change (LUC) have been achieved. Therefore, the biomass production inventories in the ecoinvent database were revised to take into account these developments.

Methods

The IPCC method tier 1 has been used for the assessment of N₂O emissions. Induced emissions from NH₃ and NO₃ were included as well. Due to the importance of the latter emissions for N₂O formation, these emissions have also been updated and harmonised. The Agrammon model was used for the NH₃ emissions. The SALCA-NO₃ model has been applied in the European inventories to estimate nitrate leaching, whilst in non-European inventories the SQCB-NO₃ model has been used. The quantification of the land use change areas has been based on annualized, retrospective data of the last 20 years. All carbon pools (from aboveground biomass to soil organic carbon) were considered and differentiated on a regional level for all of the natural vegetation categories affected. Whenever possible, default values and methods from the IPCC 2006 were applied.

Results and discussion

The changes for ammonia emissions were generally very small (?5 % on average). The nitrate emissions increased on average by +13 %, but this slight trend is the result of important downward and upward changes, whilst the average N₂O emissions decreased by ?26 %. For the existing inventories of soybean, palm oil and sugarcane production, significant increases of GHG emissions resulted from LUC modelling. This was mainly due to the consistent inclusion of all carbon stocks according to the IPCC guidelines. The calculation method can also result in important C sequestration effects in certain cases like African Jatropha production.

Conclusions

The changes in greenhouse gas emissions due to the updated methodology were significant. This shows that life cycle assessment studies for biofuels using older methodological bases need to be revised and could lead to different conclusions. The implemented and cultivated superstructure for LUC modelling is modular and flexible and can be easily extended to other important crop activities. The new parameterisation functionality applied for the activities provides powerful means for the simple generation of site-specific activities.

     

Livestock greenhouse gas emissions and mitigation potential in Europe

The livestock sector contributes considerably to global greenhouse gas emissions (GHG). Here, for the year 2007 we examined GHG emissions in the EU27 livestock sector and estimated GHG emissions from production and consumption of livestock products; including imports, exports and wastage. We also reviewed available mitigation options and estimated their potential. The focus of this review is on the beef and dairy sector since these contribute 60% of all livestock production emissions. Particular attention is paid to the role of land use and land use change (LULUC) and carbon sequestration in grasslands. GHG emissions of all livestock products amount to between 630 and 863 Mt CO₂e, or 12–17% of total EU27 GHG emissions in 2007. The highest emissions aside from production, originate from LULUC, followed by emissions from wasted food. The total GHG mitigation potential from the livestock sector in Europe is between 101 and 377 Mt CO₂e equivalent to between 12 and 61% of total EU27 livestock sector emissions in 2007. A reduction in food waste and consumption of livestock products linked with reduced production, are the most effective mitigation options, and if encouraged, would also deliver environmental and human health benefits. Production of beef and dairy on grassland, as opposed to intensive grain fed production, can be associated with a reduction in GHG emissions depending on actual LULUC emissions. This could be promoted on rough grazing land where appropriate.     

Benthivorous fish bioturbation reduces methane emissions,but increases total greenhouse gas emissions

相似文献   

Contribution of litter layer to soil greenhouse gas emissions in a temperate beech forest

Background and aims

The litter layer is a major source of CO₂, and it also influences soil-atmosphere exchange of N₂O and CH₄. So far, it is not clear how much of soil greenhouse gas (GHG) emission derives from the litter layer itself or is litter-induced. The present study investigates how the litter layer controls soil GHG fluxes and microbial decomposer communities in a temperate beech forest.

Methods

We removed the litter layer in an Austrian beech forest and studied responses of soil CO₂, CH₄ and N₂O fluxes and the microbial community via phospholipid fatty acids (PLFA). Soil GHG fluxes were determined with static chambers on 22 occasions from July 2012 to February 2013, and soil samples collected at 8 sampling events.

Results

Litter removal reduced CO₂ emissions by 30 % and increased temperature sensitivity (Q₁₀) of CO₂ fluxes. Diffusion of CH₄ into soil was facilitated by litter removal and CH₄ uptake increased by 16 %. This effect was strongest in autumn and winter when soil moisture was high. Soils without litter turned from net N₂O sources to slight N₂O sinks because N₂O emissions peaked after rain events in summer and autumn, which was not the case in litter-removal plots. Microbial composition was only transiently affected by litter removal but strongly influenced by seasonality.

Conclusions

Litter layers must be considered in calculating forest GHG budgets, and their influence on temperature sensitivity of soil GHG fluxes taken into account for future climate scenarios.

     

中国农业系统近40年温室气体排放核算

基于排放因子法构建了包含种植业和牲畜养殖业的农业系统温室气体排放核算体系,系统核算了1980-2020年我国全国尺度上的农业系统温室气体排放总量和变化趋势,并在区县级尺度下对1980、2000、2011年的中国农业系统的温室气体排放量进行核算,对比不同阶段农业系统温室气体排放变化的时空异质性规律。研究发现：1980-2020年我国农业系统温室气体排放量呈波动增长趋势,增长了近46%。CH₄是农业系统排放贡献最大的温室气体,占总排放量的47.33%。我国农业系统温室气体排放与不同地区农业生产方式有关,CH₄排放量高的地区主要位于我国主要水稻产区以及旱地作物产区。CO₂排放量高的地区主要位于东北、西北等地区以及华东地区。N₂O排放量较高地区主要位于西北的主要畜牧养殖地区,以及我国农业经济发展水平高的中南部地区。研究有助于揭示我国农业温室气体排放的动态特征,现状规律,以及空间差异性特征,从农业减排角度为实现双碳目标提供科学参考。     

Prediction of effects of beef selection indexes on greenhouse gas emissions

Genetic improvement in production efficiency traits can also drive reduction in greenhouse gas emissions. This study used international ‘best-practice’ methodology to quantify the improvements in system-wide CO₂ equivalent emissions per unit of genetic progress in the Irish Maternal Replacement (MR) and Terminal (T) beef cattle indexes. Effects of each index trait on system gross emissions (GE) and system emissions intensity (EI) were modelled by estimating effects of trait changes on per-animal feed consumption and associated methane production, per-animal meat production and numbers of animals in the system. Trait responses to index selection were predicted from linear regression of individual bull estimated breeding values for each index trait on their MR or T index value, and the resulting regression coefficients were used to calculate trait-wise responses in GE and EI from index selection. Summed over all trait responses, the MR index was predicted to reduce system GE by 0.810 kg CO₂e/breeding cow per year per € index and system EI by 0.009 kg CO₂e/kg meat per breeding cow per year per € index. These reductions were mainly driven by improvements in cow survival, reduced mature cow maintenance feed requirements, shorter calving interval and reduced offspring mortality. The T index was predicted to reduce system EI by 0.021 kg CO₂e/kg meat per breeding cow per year per € index, driven by increased meat production from improvements in carcass weight, conformation and fat. Implications for incorporating an EI reduction index to the current production indexes and long-term projections for national breeding programs are discussed.     

Effect of water table on greenhouse gas emissions from peatland mesocosms

Peatland landscapes typically exhibit large variations in greenhouse gas (GHG) emissions due to microtopographic and vegetation heterogeneity. As many peatland budgets are extrapolated from small-scale chamber measurements it is important to both quantify and understand the processes underlying this spatial variability. Here we carried out a mesocosm study which allowed a comparison to be made between different microtopographic features and vegetation communities, in response to conditions of both static and changing water table. Three mesocosm types (hummocks?+?Juncus effusus, hummocks?+?Eriophorum vaginatum, and hollows dominated by moss) were subjected to two water table treatments (0–5 cm and 30–35 cm depth). Measurements were made of soil-atmosphere GHG exchange, GHG concentration within the peat profile and soil water solute concentrations. After 14 weeks the high water table group was drained and the low water table group flooded. Measurement intensity was then increased to examine the immediate response to change in water table position. Mean CO₂, CH₄ and N₂O exchange across all chambers was 39.8 μg m^?2 s^?1, 54.7 μg m^?2 h^?1 and ?2.9 μg m^?2 h^?1, respectively. Hence the GHG budget was dominated in this case by CO₂ exchange. CO₂ and N₂O emissions were highest in the low water table treatment group; CH₄ emissions were highest in the saturated mesocosms. We observed a strong interaction between mesocosm type and water table for CH₄ emissions. In contrast to many previous studies, we found that the presence of aerenchyma-containing vegetation reduced CH₄ emissions. A significant pulse in both CH₄ and N₂O emissions occurred within 1–2 days of switching the water table treatments. This pulsing could potentially lead to significant underestimation of landscape annual GHG budgets when widely spaced chamber measurements are upscaled.     

An agronomic assessment of greenhouse gas emissions from major cereal crops

Agricultural greenhouse gas (GHG) emissions contribute approximately 12% to total global anthropogenic GHG emissions. Cereals (rice, wheat, and maize) are the largest source of human calories, and it is estimated that world cereal production must increase by 1.3% annually to 2025 to meet growing demand. Sustainable intensification of cereal production systems will require maintaining high yields while reducing environmental costs. We conducted a meta‐analysis (57 published studies consisting of 62 study sites and 328 observations) to test the hypothesis that the global warming potential (GWP) of CH₄ and N₂O emissions from rice, wheat, and maize, when expressed per ton of grain (yield‐scaled GWP), is similar, and that the lowest value for each cereal is achieved at near optimal yields. Results show that the GWP of CH₄ and N₂O emissions from rice (3757 kg CO₂ eq ha^?1 season^?1) was higher than wheat (662 kg CO₂ eq ha^?1 season^?1) and maize (1399 kg CO₂ eq ha^?1 season^?1). The yield‐scaled GWP of rice was about four times higher (657 kg CO₂ eq Mg^?1) than wheat (166 kg CO₂ eq Mg^?1) and maize (185 kg CO₂ eq Mg^?1). Across cereals, the lowest yield‐scaled GWP values were achieved at 92% of maximal yield and were about twice as high for rice (279 kg CO₂ eq Mg^?1) than wheat (102 kg CO₂ eq Mg^?1) or maize (140 kg CO₂ eq Mg^?1), suggesting greater mitigation opportunities for rice systems. In rice, wheat and maize, 0.68%, 1.21%, and 1.06% of N applied was emitted as N₂O, respectively. In rice systems, there was no correlation between CH₄ emissions and N rate. In addition, when evaluating issues related to food security and environmental sustainability, other factors including cultural significance, the provisioning of ecosystem services, and human health and well‐being must also be considered.     

Pile mixing increases greenhouse gas emissions during composting of dairy manure

The effect of pile mixing on greenhouse gas (GHG) emissions during dairy manure composting was determined using large flux chambers designed to completely cover replicate pilot-scale compost piles. GHG emissions from compost piles that were mixed four times during the 80 day trial were approximately 20% higher than emissions from unmixed (static) piles. For both treatments, carbon dioxide (CO(2)), methane (CH(4)), and nitrous oxide (N(2)O) accounted for 75-80%, 18-21%, and 2-4% of GHG emissions, respectively. Seventy percent of CO(2) emissions and 95% of CH(4) emissions from all piles occurred within first 23 days. By contrast, 80-95% of N(2)O emissions occurred after this period. Mixed and static piles released 2 and 1.6 kg GHG (CO(2)-Eq.) for each kg of degraded volatile solids (VS), respectively. Our results suggest that to minimize GHG emissions, farmers should store manure in undisturbed piles or delay the first mixing of compost piles for approximately 4 weeks.     

Microbial sensitivity to temperature and sulfate deposition modulates greenhouse gas emissions from peat soils

Peatlands are among the largest natural sources of atmospheric methane (CH₄) worldwide. Microbial processes play a key role in regulating CH₄ emissions from peatland ecosystems, yet the complex interplay between soil substrates and microbial communities in controlling CH₄ emissions as a function of global change remains unclear. Herein, we performed an integrated analysis of multi-omics data sets to provide a comprehensive understanding of the molecular processes driving changes in greenhouse gas (GHG) emissions in peatland ecosystems with increasing temperature and sulfate deposition in a laboratory incubation study. We sought to first investigate how increasing temperatures (4, 21, and 35°C) impact soil microbiome–metabolome interactions; then explore the competition between methanogens and sulfate-reducing bacteria (SRBs) with increasing sulfate concentrations at the optimum temperature for methanogenesis. Our results revealed that peat soil organic matter degradation, mediated by biotic and potentially abiotic processes, is the main driver of the increase in CO₂ production with temperature. In contrast, the decrease in CH₄ production at 35°C was linked to the absence of syntrophic communities and the potential inhibitory effect of phenols on methanogens. Elevated temperatures further induced the microbial communities to develop high growth yield and stress tolerator trait-based strategies leading to a shift in their composition and function. On the other hand, SRBs were able to outcompete methanogens in the presence of non-limiting sulfate concentrations at 21°C, thereby reducing CH₄ emissions. At higher sulfate concentrations, however, the prevalence of communities capable of producing sufficient low-molecular-weight carbon substrates for the coexistence of SRBs and methanogens was translated into elevated CH₄ emissions. The use of omics in this study enhanced our understanding of the structure and interactions among microbes with the abiotic components of the system that can be useful for mitigating GHG emissions from peatland ecosystems in the face of global change.     

Global change could amplify fire effects on soil greenhouse gas emissions

Background

Little is known about the combined impacts of global environmental changes and ecological disturbances on ecosystem functioning, even though such combined impacts might play critical roles in shaping ecosystem processes that can in turn feed back to climate change, such as soil emissions of greenhouse gases.

Methodology/Principal Findings

We took advantage of an accidental, low-severity wildfire that burned part of a long-term global change experiment to investigate the interactive effects of a fire disturbance and increases in CO₂ concentration, precipitation and nitrogen supply on soil nitrous oxide (N₂O) emissions in a grassland ecosystem. We examined the responses of soil N₂O emissions, as well as the responses of the two main microbial processes contributing to soil N₂O production – nitrification and denitrification – and of their main drivers. We show that the fire disturbance greatly increased soil N₂O emissions over a three-year period, and that elevated CO₂ and enhanced nitrogen supply amplified fire effects on soil N₂O emissions: emissions increased by a factor of two with fire alone and by a factor of six under the combined influence of fire, elevated CO₂ and nitrogen. We also provide evidence that this response was caused by increased microbial denitrification, resulting from increased soil moisture and soil carbon and nitrogen availability in the burned and fertilized plots.

Conclusions/Significance

Our results indicate that the combined effects of fire and global environmental changes can exceed their effects in isolation, thereby creating unexpected feedbacks to soil greenhouse gas emissions. These findings highlight the need to further explore the impacts of ecological disturbances on ecosystem functioning in the context of global change if we wish to be able to model future soil greenhouse gas emissions with greater confidence.     

Assessing greenhouse gas emissions from peatlands using vegetation as a proxy

Drained peatlands in temperate Europe are a globally important source of greenhouse gas (GHG) emissions. This article outlines a methodology to assess emissions and emission reductions from peatland rewetting projects using vegetation as a proxy. Vegetation seems well qualified for indicating GHG fluxes from peat soils as it reflects long-term water level, affects GHG emissions via assimilate supply and aerenchyma and allows fine-scaled mapping. The methodology includes mapping of vegetation types characterised by the presence and absence of species groups indicative for specific water level classes. GHG flux values are assigned to the vegetation types following a standardized protocol and using published emission values from plots with similar vegetation and water level in regions with similar climate and flora. Carbon sequestration in trees is accounted for by estimating the annual sequestration in tree biomass from forest inventory data. The method follows the criteria of the Voluntary Carbon Standard and is illustrated using the example of two Belarusian peatlands.     

Progress in the studies on the greenhouse gas emissions from reservoirs

The green credentials of hydroelectricity in terms of greenhouse-gas (GHG) emissions have been tarnished with the finding of the researches on GHG emissions from hydroelectric reservoirs in the last two decades. Substantial amounts of GHGs release from the tropical reservoirs, especially methane (CH₄) from Brazil’s Amazonian areas. CH₄ contributes strongly to climate change because it has a global warming potential (GWP) 24 times higher than carbon dioxide (CO₂) on a per molecule basis over a 100-year time horizon. GHGs may emit from reservoirs through four different pathways to the atmosphere: (1) diffusive flux at the reservoir surface, (2) gas bubble flux in the shallow zones of a reservoir, (3) water degassing flux at the outlet of the powerhouse downstream of turbines and spillways, and (4) flux across the air–water interface in the rivers downstream of the dams. This paper reviewed the productions and emissions of CH₄, CO₂, and N₂O in reservoirs, and the environmental variables influencing CH₄ and CO₂ emissions were also summarized. Moreover, the paper combined with the progress of GHG emissions from Three Gorges Reservoir and proposed three crucial problems to be resolved on GHG emissions from reservoirs at present, which would be benefit to estimate the total GHG emissions from Three Gorges Reservoir accurately.