Development of an <Emphasis Type="Italic">Agrobacterium</Emphasis>-mediated transformation method for <Emphasis Type="Italic">Taxus</Emphasis> suspension cultures

The FDA-approved anti-cancer compound paclitaxel is currently produced commercially by Taxus plant cell suspension cultures. One major limitation to the use of plant cell culture as a production platform is the low and variable product yields. Therefore, methods to increase and stabilize paclitaxel production are necessary to ensure product security, especially as the demand for paclitaxel continues to rise. Although a stable transformation method for Taxus suspension cultures has been developed, stable transformant yields are low (around 1% of experiments) and the method does not translate to the Taxus cuspidata Siebold and Zucc. and Taxus canadensis Marshall cell lines utilized in this study. Therefore, a new method for Agrobacterium-mediated transformation of Taxus callus and suspension cultures was developed through identification of the optimal Agrobacterium strain, inclusion of an anti-necrotic cocktail (silver nitrate, cysteine, and ascorbic acid) and increased recovery time for cells after cocultivation, the time following infection with Agrobacterium tumefaciens. Application of the increased recovery time to transformation of T. cuspidata line PO93XC resulted in 200 calluses staining positive for GUS. Additionally, two transgenic lines have been maintained with stable transgene expression for over 5 yr. This method represents an improvement over existing transformation methods for Taxus cultures and can be applied for future metabolic engineering efforts.     

Combinatorial analysis of enzymatic bottlenecks of <Emphasis Type="SmallCaps">l</Emphasis>-tyrosine pathway by <Emphasis Type="Italic">p</Emphasis>-coumaric acid production in <Emphasis Type="Italic">Saccharomyces cerevisiae</Emphasis>

Objective

To identify new enzymatic bottlenecks of l-tyrosine pathway for further improving the production of l-tyrosine and its derivatives.

Result

When ARO4 and ARO7 were deregulated by their feedback resistant derivatives in the host strains, the ARO2 and TYR1 genes, coding for chorismate synthase and prephenate dehydrogenase were further identified as new important rate-limiting steps. The yield of p-coumaric acid in the feedback-resistant strain overexpressing ARO2 or TYR1, was significantly increased from 6.4 to 16.2 and 15.3 mg l^?1, respectively. Subsequently, we improved the strain by combinatorial engineering of pathway genes increasing the yield of p-coumaric acid by 12.5-fold (from 1.7 to 21.3 mg l^?1) compared with the wild-type strain. Batch cultivations revealed that p-coumaric acid production was correlated with cell growth, and the formation of by-product acetate of the best producer NK-M6 increased to 31.1 mM whereas only 19.1 mM acetate was accumulated by the wild-type strain.

Conclusion

Combinatorial metabolic engineering provides a new strategy for further improvement of l-tyrosine or other metabolic biosynthesis pathways in S. cerevisiae.

     

Progress in the microbial production of <Emphasis Type="Italic">S</Emphasis>-adenosyl-<Emphasis Type="SmallCaps">l</Emphasis>-methionine

S-Adenosyl-l-methionine (SAM), which exists in all living organisms, serves as an activated group donor in a range of metabolic reactions, including trans-methylation, trans-sulfuration and trans-propylamine. Compared with its chemical synthesis and enzyme catalysis production, the microbial production of SAM is feasible for industrial applications. The current clinical demand for SAM is constantly increasing. Therefore, vast interest exists in engineering the SAM metabolism in cells for increasing product titers. Here, we provided an overview of updates on SAM microbial productivity improvements with an emphasis on various strategies that have been used to enhance SAM production based on increasing the precursor and co-factor availabilities in microbes. These strategies included the sections of SAM-producing microbes and their mutant screening, optimization of the fermentation process, and the metabolic engineering. The SAM-producing strains that were used extensively were Saccharomyces cerevisiae, Pichia pastoris, Candida utilis, Scheffersomyces stipitis, Kluyveromyces lactis, Kluyveromyces marxianus, Corynebacterium glutamicum, and Escherichia coli, in addition to others. The optimization of the fermentation process mainly focused on the enhancement of the methionine, ATP, and other co-factor levels through pulsed feeding as well as the optimization of nitrogen and carbon sources. Various metabolic engineering strategies using precise control of gene expression in engineered strains were also highlighted in the present review. In addition, some prospects on SAM microbial production were discussed.     

Genome-scale model-driven strain design for dicarboxylic acid production in <Emphasis Type="Italic">Yarrowia lipolytica</Emphasis>

Background

Recently, there have been several attempts to produce long-chain dicarboxylic acids (DCAs) in various microbial hosts. Of these, Yarrowia lipolytica has great potential due to its oleaginous characteristics and unique ability to utilize hydrophobic substrates. However, Y. lipolytica should be further engineered to make it more competitive: the current approaches are mostly intuitive and cumbersome, thus limiting its industrial application.

Results

In this study, we proposed model-guided metabolic engineering strategies for enhanced production of DCAs in Y. lipolytica. At the outset, we reconstructed genome-scale metabolic model (GSMM) of Y. lipolytica (iYLI647) by substantially expanding the previous models. Subsequently, the model was validated using three sets of published culture experiment data. It was finally exploited to identify genetic engineering targets for overexpression, knockout, and cofactor modification by applying several in silico strain design methods, which potentially give rise to high yield production of the industrially relevant long-chain DCAs, e.g., dodecanedioic acid (DDDA). The resultant targets include (1) malate dehydrogenase and malic enzyme genes and (2) glutamate dehydrogenase gene, in silico overexpression of which generated additional NADPH required for fatty acid synthesis, leading to the increased DDDA fluxes by 48% and 22% higher, respectively, compared to wild-type. We further investigated the effect of supplying branched-chain amino acids on the acetyl-CoA turn-over rate which is key metabolite for fatty acid synthesis, suggesting their significance for production of DDDA in Y. lipolytica.

Conclusion

In silico model-based strain design strategies allowed us to identify several metabolic engineering targets for overproducing DCAs in lipid accumulating yeast, Y. lipolytica. Thus, the current study can provide a methodological framework that is applicable to other oleaginous yeasts for value-added biochemical production.

     

The impact of a single-nucleotide mutation of <Emphasis Type="Italic">bgl2</Emphasis> on cellulase induction in a <Emphasis Type="Italic">Trichoderma reesei</Emphasis> mutant

Background

The filamentous fungus Trichoderma reesei (anamorph of Hypocrea jecorina) produces increased cellulase expression when grown on cellulose or its derivatives as a sole carbon source. It has been believed that β-glucosidases of T. reesei not only metabolize cellobiose but also contribute in the production of inducers of cellulase gene expression by their transglycosylation activity. The cellulase hyper-producing mutant PC-3-7 developed in Japan has enhanced cellulase production ability when cellobiose is used as the inducer. The comparative genomics analysis of PC-3-7 and its parent revealed a single-nucleotide mutation within the bgl2 gene encoding intracellular β-glucosidase II (BGLII/Cel1a), giving rise to an amino acid substitution in PC-3-7, which could potentially account for the enhanced cellulase expression when these strains are cultivated on cellulose and cellobiose.

Results

To analyze the effects of the BGLII mutation in cellulase induction, we constructed both a bgl2 revertant and a disruptant. Enzymatic analysis of the transformant lysates showed that the strain expressing mutant BGLII exhibited weakened cellobiose hydrolytic activity, but produced some transglycosylation products, suggesting that the SNP in bgl2 strongly diminished cellobiase activity, but did not result in complete loss of function of BGLII. The analysis of the recombinant BGLII revealed that transglycosylation products might be oligosaccharides, composed probably of glucose linked β-1,4, β-1,3, or a mixture of both. PC-3-7 revertants of bgl2 exhibited reduced expression and inducibility of cellulase during growth on cellulose and cellobiose substrates. Furthermore, the effect of this bgl2 mutation was reproduced in the common strain QM9414 in which the transformants showed cellulase production comparable to that of PC-3-7.

Conclusion

We conclude that BGLII plays an important role in cellulase induction in T. reesei and that the bgl2 mutation in PC-3-7 brought about enhanced cellulase expression on cellobiose. The results of the investigation using PC-3-7 suggested that other mutation(s) in PC-3-7 could also contribute to cellulase induction. Further investigation is essential to unravel the mechanism responsible for cellulase induction in T. reesei.

     

Development of <Emphasis Type="Italic">mazF</Emphasis>-based markerless genome editing system and metabolic pathway engineering in <Emphasis Type="Italic">Candida tropicalis</Emphasis> for producing long-chain dicarboxylic acids

Candida tropicalis can grow with alkanes or plant oils as the sole carbon source, and its industrial application thus has great potential. However, the choice of a suitable genetic operating system can effectively increase the speed of metabolic engineering. MazF functions as an mRNA interferase that preferentially cleaves single-stranded mRNAs at ACA sequences to inhibit protein synthesis, leading to cell growth arrest. Here, we constructed a suicide plasmid named pPICPJ-mazF that uses the mazF gene of Escherichia coli as a counterselectable marker for the markerless editing of C. tropicalis genes to increase the rate of conversion of oils into long-chain dicarboxylic acids. To reduce the β-oxidation of fatty acids, the carnitine acetyltransferase gene (CART) was deleted using the gene editing system, and the yield of long-chain acids from the strain was increased to 8.27 g/L. By two homologous single exchanges, the promoters of both the cytochrome P450 gene and the NADPH–cytochrome P450 reductase gene were subsequently replaced by the constitutively expressed promoter pGAP, and the production of long-chain dicarboxylic acids by the generated strain (C. tropicalis PJPP1702) reached 11.39 g/L. The results of fed-batch fermentation showed that the yield of long-chain acids from the strain was further increased to 32.84 g/L, which was 11.4 times higher than that from the original strain. The results also showed that the pPICPJ-mazF-based markerless editing system may be more suited for completing the genetic editing of C. tropicalis.     

Microbial production of ethanol from acetate by engineered <Emphasis Type="Italic">Ralstonia eutropha</Emphasis>

This study was performed to produce ethanol from acetate using a genetically engineered Ralstonia eutropha. In order to genetically modify R. eutropha H16, phaCAB operon encoding metabolic pathway genes from acetyl-CoA to polyhydroxybutyrate (PHB) was deleted and adhE encoding an alcohol dehydrogenase from Escherichia coli was overexpressed for conversion of acetyl-CoA to ethanol. The resulting strain produced ethanol up to 170 mg/L when cultivated in minimal media supplemented with 5 g/L of acetate as a sole carbon source. Growth and ethanol production were optimized by adjusting nitrogen source (NH₄Cl) content and repetitive feeding of acetate into the bacterial culture, by which the ethanol production was reached to approximately 350 mg/L for 84 h.     

Native promoters of <Emphasis Type="Italic">Corynebacterium glutamicum</Emphasis> and its application in <Emphasis Type="SmallCaps">l</Emphasis>-lysine production

Objective

To identify useful native promoters of Corynebacterium glutamicum for fine-tuning of gene expression in metabolic engineering.

Results

Sixteen native promoters of C. glutamicum were characterized. These promoters covered a strength range of 31-fold with small increments and exhibited relatively stable activity during the whole growth phase using β-galactosidase as the reporter. The mRNA level and enzymatic activity of the lacZ reporter gene exhibited high correlation (R ² = 0.96) under the control of these promoters. Sequence analysis found that strong promoters had high similarity of the -10 hexamer to the consensus sequence and preference of the AT-rich UP element upstream the -35 region. To test the utility of the promoter library, the characterized native promoters were applied to modulate the sucCD-encoded succinyl-CoA synthetase expression for l-lysine overproduction.

Conclusions

The native promoters with various strengths realize the efficient and precise regulation of gene expression in metabolic engineering of C. glutamicum.

     

Enhancement of rapamycin production by metabolic engineering in <Emphasis Type="Italic">Streptomyces hygroscopicus</Emphasis> based on genome-scale metabolic model

Rapamycin, as a macrocyclic polyketide with immunosuppressive, antifungal, and anti-tumor activity produced by Streptomyces hygroscopicus, is receiving considerable attention for its significant contribution in medical field. However, the production capacity of the wild strain is very low. Hereby, a computational guided engineering approach was proposed to improve the capability of rapamycin production. First, a genome-scale metabolic model of Streptomyces hygroscopicus ATCC 29253 was constructed based on its annotated genome and biochemical information. The model consists of 1003 reactions, 711 metabolites after manual refinement. Subsequently, several potential genetic targets that likely guaranteed an improved yield of rapamycin were identified by flux balance analysis and minimization of metabolic adjustment algorithm. Furthermore, according to the results of model prediction, target gene pfk (encoding 6-phosphofructokinase) was knocked out, and target genes dahP (encoding 3-deoxy-d-arabino-heptulosonate-7-phosphate synthase) and rapK (encoding chorismatase) were overexpressed in the parent strain ATCC 29253. The yield of rapamycin increased by 30.8% by knocking out gene pfk and increased by 36.2 and 44.8% by overexpression of rapK and dahP, respectively, compared with parent strain. Finally, the combined effect of the genetic modifications was evaluated. The titer of rapamycin reached 250.8 mg/l by knockout of pfk and co-expression of genes dahP and rapK, corresponding to a 142.3% increase relative to that of the parent strain. The relationship between model prediction and experimental results demonstrates the validity and rationality of this approach for target identification and rapamycin production improvement.     

Metabolic engineering of <Emphasis Type="Italic">Escherichia coli</Emphasis> W3110 for the production of <Emphasis Type="SmallCaps">l</Emphasis>-methionine

In this study, we constructed an l-methionine-producing recombinant strain from wild-type Escherichia coli W3110 by metabolic engineering. To enhance the carbon flux to methionine and derepression met regulon, thrBC, lysA, and metJ were deleted in turn. Methionine biosynthesis obstacles were overcome by overexpression of metA ^Fbr (Fbr, Feedback resistance), metB, and malY under control of promoter pN25. Recombinant strain growth and methionine production were further improved by attenuation of metK gene expression through replacing native promoter by metK84p. Blocking the threonine pathway by deletion of thrBC or thrC was compared. Deletion of thrC showed faster growth rate and higher methionine production. Finally, metE, metF, and metH were overexpressed to enhance methylation efficiency. Compared with the original strain E. coli W3110, the finally obtained Me05 (pETMA^Fbr-B-Y/pKKmetH) improved methionine production from 0 to 0.65 and 5.62 g/L in a flask and a 15-L fermenter, respectively.     

Isolation and characterization of the dehydration stress-inducible GhRDL1 promoter from the cultivated upland cotton (<Emphasis Type="Italic">Gossypium hirsutum</Emphasis>)

Cotton fiber is the basic raw material used in the textile industry. The fiber yield is severely affected by a number of biotic and abiotic factors, such as insects, viruses, drought and salinity. Drought is a major factor that negatively impacts the yields and quality of cotton fiber. Promoters that respond to stress conditions and up-regulate transgenes are of great significance in crop improvement using genetic engineering approach. Although dehydration-responsive gene promoters, such as RD22 and RD29 from Arabidopsis, have been characterized, not much information is available regarding stress-responsive promoters from Gossypium hirsutum, which accounts for approximately 90 % of cultivated cotton. In this study, we isolated and characterized the promoter of a dehydration-responsive gene (GhRDL1) from G. hirsutum using Agrobacterium-mediated transformation in tobacco and cotton. Transgenic tobacco plants expressing uidA under the GhRDL1 promoter showed GUS activity in the trichomes. Also, GUS expression was observed to some extent in leaf, stem and floral tissues. Similar results were observed when GhRDL1 promoter was tested in transgenic cotton. Most importantly, our study showed that the GhRDL1 promoter is up-regulated in the presence of polyethylene glycol that creates water stress under invitro conditions. Thus, the GhRDL1 promoter may find its usefulness in the development of stress-tolerant cotton and other crop species in the near future.     

Identification and Mutational Analysis of <Emphasis Type="Italic">Escherichia coli</Emphasis> Sorbitol-Enhanced Glucose-Repressed <Emphasis Type="Italic">srlA</Emphasis> Promoter Expressed in LB Medium by Using Homologous Recombination and One-Round PCR Products

Escherichia coli has been used for recombinant protein production for many years. However, no native E. coli promoters have been found for constitutive expression in LB medium. To obtain high-expression E. coli promoters active in LB medium, we inserted various promoter regions upstream of eEmRFP that encodes a red fluorescent protein. Among the selected promoters, only colonies of srlA promoter transformants turned red on LB plate. srlA is a gene that regulates sorbitol utilization. The addition of sorbitol enhanced eEmRFP expression but glucose and other sugars repressed, indicating that srlAp is a sorbitol-enhanced glucose-repressed promoter. To analyze the srlAp sequence, a novel site-directed mutagenesis method was developed. Since we demonstrated that homologous recombination in E. coli could occur between 12-bp sequences, 12-bp overlapping sequences were attached to the set of primers that were designed to produce a full-length plasmid, denoted “one-round PCR product.” Using this method, we identified that the srlA promoter region was 100 bp. Further, the sequence adjacent to the start codon was found to be essential for high expression, suggesting that the traditionally used restriction enzyme sites for cloning in the promoter region have hindered expression. The srlA-driven expression system and DNA manipulation with one-round PCR products are useful tools in E. coli genetic engineering.     

Engineering of <Emphasis Type="Italic">Saccharomyces cerevisiae</Emphasis> to utilize xylan as a sole carbohydrate source by co-expression of an endoxylanase,xylosidase and a bacterial xylose isomerase

Xylan represents a major component of lignocellulosic biomass, and its utilization by Saccharomyces cerevisiae is crucial for the cost effective production of ethanol from plant biomass. A recombinant xylan-degrading and xylose-assimilating Saccharomyces cerevisiae strain was engineered by co-expression of the xylanase (xyn2) of Trichoderma reesei, the xylosidase (xlnD) of Aspergillus niger, the Scheffersomyces stipitis xylulose kinase (xyl3) together with the codon-optimized xylose isomerase (xylA) from Bacteroides thetaiotaomicron. Under aerobic conditions, the recombinant strain displayed a complete respiratory mode, resulting in higher yeast biomass production and consequently higher enzyme production during growth on xylose as carbohydrate source. Under oxygen limitation, the strain produced ethanol from xylose at a maximum theoretical yield of ~90 %. This study is one of only a few that demonstrates the construction of a S. cerevisiae strain capable of growth on xylan as sole carbohydrate source by means of recombinant enzymes.     

Metabolic engineering of <Emphasis Type="Italic">Saccharomyces cerevisiae</Emphasis> for linalool production

Objectives

To engineer the yeast Saccharomyces cerevisiae for the heterologous production of linalool.

Results

Expression of linalool synthase gene from Lavandula angustifolia enabled heterologous production of linalool in S. cerevisiae. Downregulation of ERG9 gene, that encodes squalene synthase, by replacing its native promoter with the repressible MET3 promoter in the presence of methionine resulted in accumulation of 78 µg linalool l^?1 in the culture medium. This was more than twice that produced by the control strain. The highest linalool titer was obtained by combined repression of ERG9 and overexpression of tHMG1. The yeast strain harboring both modifications produced 95 μg linalool l^?1.

Conclusions

Although overexpression of tHMG1 and downregulation of ERG9 enhanced linalool titers threefold in the engineered yeast strain, alleviating linalool toxicity is necessary for further improvement of linalool biosynthesis in yeast.

     

Metabolic engineering of <Emphasis Type="Italic">Methylobacterium extorquens</Emphasis> AM1 for the production of butadiene precursor

Background

Butadiene is a platform chemical used as an industrial feedstock for the manufacture of automobile tires, synthetic resins, latex and engineering plastics. Currently, butadiene is predominantly synthesized as a byproduct of ethylene production from non-renewable petroleum resources. Although the idea of biological synthesis of butadiene from sugars has been discussed in the literature, success for that goal has so far not been reported. As a model system for methanol assimilation, Methylobacterium extorquens AM1 can produce several unique metabolic intermediates for the production of value-added chemicals, including crotonyl-CoA as a potential precursor for butadiene synthesis.

Results

In this work, we focused on constructing a metabolic pathway to convert crotonyl-CoA into crotyl diphosphate, a direct precursor of butadiene. The engineered pathway consists of three identified enzymes, a hydroxyethylthiazole kinase (THK) from Escherichia coli, an isopentenyl phosphate kinase (IPK) from Methanothermobacter thermautotrophicus and an aldehyde/alcohol dehydrogenase (ADHE2) from Clostridium acetobutylicum. The K_m and k_cat of THK, IPK and ADHE2 were determined as 8.35 mM and 1.24 s^?1, 1.28 mM and 153.14 s^?1, and 2.34 mM and 1.15 s^?1 towards crotonol, crotyl monophosphate and crotonyl-CoA, respectively. Then, the activity of one of rate-limiting enzymes, THK, was optimized by random mutagenesis coupled with a developed high-throughput screening colorimetric assay. The resulting variant (THK^M82V) isolated from over 3000 colonies showed 8.6-fold higher activity than wild-type, which helped increase the titer of crotyl diphosphate to 0.76 mM, corresponding to a 7.6% conversion from crotonol in the one-pot in vitro reaction. Overexpression of native ADHE2, IPK with THK^M82V under a strong promoter mxaF in M. extorquens AM1 did not produce crotyl diphosphate from crotonyl-CoA, but the engineered strain did generate 0.60 μg/mL of intracellular crotyl diphosphate from exogenously supplied crotonol at mid-exponential phase.

Conclusions

These results represent the first step in producing a butadiene precursor in recombinant M. extorquens AM1. It not only demonstrates the feasibility of converting crotonol to key intermediates for butadiene biosynthesis, it also suggests future directions for improving catalytic efficiency of aldehyde/alcohol dehydrogenase to produce butadiene precursor from methanol.