Impact of pre-incubation time of silk fibroin scaffolds in culture medium on cell proliferation and attachment

Cell behaviours such as proliferation and attachment can be affected by the length of pre-incubation period of the scaffolds in the culture medium for long term. The aim of this study was to investigate the long term pre-incubation of 3D silk fibroin scaffolds in complete culture medium on cell attachment and proliferation. After the preparation of silk fibroin scaffolds by the technique of freeze drying, the scaffolds were pre-incubated in complete culture medium for 2 d, 6 d or 10 d before apical papilla stem cells (SCAP) seeding. Modifications of the scaffold surface and wettability were examined by FE-SEM and water contact angle, respectively. Results showed a decrease both in roughness and water contact angle as pre-incubation time increases. DNA measurement after 18 h and 10 d cell seeding showed a significant increase of DNA concentration which represents better attachment and proliferation with pre-incubation time increase. Qualitative examination, live&dead assay or H&E staining method after 30 h and 10 d cell seeding respectively, indicated that pre-incubation of scaffolds has time dependent effect on cell proliferation and attachment. This suggests that improvement of cell attachment and proliferation may be mediated by differences in the amount of wettability (decreased water contact angle) after exposure of scaffold to culture medium for long term which, in turn, causes more protein adsorption in the surface of silk fibroin scaffold (decreased roughness).     

Bioactive glass ceramic nanoparticles-coated poly(l-lactic acid) scaffold improved osteogenic differentiation of adipose stem cells in equine

Horses with big bone fractures have low chance to live mainly due to the lake of a proper treatment strategy. We believe that further attempts in equine bone tissue engineering will probably be required to meet all the needs for the lesion therapies. Therefore in this study we aimed to investigate the osteogenic differentiation capacity of equine adipose-derived stem cells (e-ASCs) on nano-bioactive glass (nBGs) coated poly(l-lactic acid) (PLLA) nanofibers scaffold (nBG-PLLA). Using electrospinning technique, PLLA scaffold was prepared successfully and coated with nBGs. Fabricated nanofibers were characterized by MTT, SEM, and FTIR analyses, and then osteogenic differentiation potential of isolated e-ASCs was investigated by the most key osteogenic markers, namely Alizarin red-S, ALP, calcium content and bone related (RUNX2, Collagen I, Osteonectin, and ALP) gene markers. Our results indicated that nBGs was successfully coated on PLLA scaffold and this scaffold had no negative (p > 0.05) effect on cell growth rate as indicated by MTT assay. Moreover, e-ASCs that differentiated on nBGs-PLLA scaffold showed a higher (p < 0.05) ALP activity, more (p < 0.05) calcium content, and higher (p < 0.05) expression of bone-related genes than that on uncoated PLLA scaffold and TCPS. According to the results, a combination of bioceramics and biopolymeric nanofibers hold valuable promising potentials to use for bone tissue engineering application and regenerative medicine.     

Electrospun Poly(L-Lactide) Fiber with Ginsenoside Rg3 for Inhibiting Scar Hyperplasia of Skin

Hypertrophic scarring (HS) has been considered as a great concern for patients and a challenging problem for clinicians as it can be cosmetically disfiguring and functionally debilitating. In this study, Ginsenoside Rg3/Poly(l-lactide) (G-Rg3/PLLA) electrospun fibrous scaffolds covering on the full-thickness skin excisions location was designed to suppress the hypertrophic scar formation in vivo. SEM and XRD results indicated that the crystal G-Rg3 carried in PLLA electrospun fibers was in amorphous state, which facilitates the solubility of G-Rg3 in the PLLA electrospun fibrous scaffolds, and solubility of G-Rg3 in PBS is increased from 3.2 µg/ml for pure G-Rg3 powders to 19.4 µg/ml for incorporated in PLLA-10% fibers. The released G-Rg3 content in the physiological medium could be further altered from 324 to 3445 µg in a 40-day release period by adjusting the G-Rg3 incorporation amount in PLLA electrospun fibers. In vitro results demonstrated that electrospun G-Rg3/PLLA fibrous scaffold could significantly inhibit fibroblast cell growth and proliferation. In vivo results confirmed that the G-Rg3/PLLA electrospun fibrous scaffold showed significant improvements in terms of dermis layer thickness, fibroblast proliferation, collagen fibers and microvessels, revealing that the incorporation of the G-Rg3 in the fibers prevented the HS formation. The above results demonstrate the potential use of G-Rg3/PLLA electrospun fibrous scaffolds to rapidly minimize fibroblast growth and restore the structural and functional properties of wounded skin for patients with deep trauma, severe burn injury, and surgical incision.     

Electrospun Poly(L-lactide)/Poly(ε-caprolactone) Blend Nanofibrous Scaffold: Characterization and Biocompatibility with Human Adipose-Derived Stem Cells

The essence of tissue engineering is the fabrication of autologous cells or induced stem cells in naturally derived or synthetic scaffolds to form specific tissues. Polymer is thought as an appealing source of cell-seeded scaffold owing to the diversity of its physicochemical property and can be electrospun into nano-size to mimic natural structure. Poly (L-lactic acid) (PLLA) and poly (ε-caprolactone) (PCL) are both excellent aliphatic polyester with almost “opposite” characteristics. The controlling combination of PLLA and PCL provides varying properties and makes diverse applications. Compared with the copolymers of the same components, PLLA/PCL blend demonstrates its potential in regenerative medicine as a simple, efficient and scalable alternative. In this study, we electrospun PLLA/PCL blends of different weight ratios into nanofibrous scaffolds (NFS) and their properties were detected including morphology, porosity, degradation, ATR-FTIR analysis, stress-stain assay, and inflammatory reaction. To explore the biocompatibility of the NFS we synthesized, human adipose-derived stem cells (hASCs) were used to evaluate proliferation, attachment, viability and multi-lineage differentiation. In conclusion, the electrospun PLLA/PCL blend nanofibrous scaffold with the indicated weight ratios all supported hASCs well. However, the NFS of 1/1 weight ratio showed better properties and cellular responses in all assessments, implying it a biocompatible scaffold for tissue engineering.     

Ferutinin promotes proliferation and osteoblastic differentiation in human amniotic fluid and dental pulp stem cells

AimsThe phytoestrogen Ferutinin plays an important role in prevention of osteoporosis caused by ovariectomy-induced estrogen deficiency in rats, but there is no evidence of its effect on osteoblastic differentiation in vitro. In this study we investigated the effect of Ferutinin on proliferation and osteoblastic differentiation of two different human stem cells populations, one derived from the amniotic fluid (AFSCs) and the other from the dental pulp (DPSCs).Main methodsAFSCs and DPSCs were cultured in a differentiation medium for 14 or 21 days with or without the addition of Ferutinin at a concentration ranging from 10^? 11 to 10^? 4 M. 17β-Estradiol was used as a positive drug at 10^? 8 M. Cell proliferation and expression of specific osteoblast phenotype markers were analyzed.Key findingsMTT assay revealed that Ferutinin, at concentrations of 10^? 8 and 10^? 9 M, enhanced proliferation of both AFSCs and DPSCs after 72 h of exposure. Moreover, in both stem cell populations, Ferutinin treatment induced greater expression of the osteoblast phenotype markers osteocalcin (OCN), osteopontin (OPN), collagen I, RUNX-2 and osterix (OSX), increased calcium deposition and osteocalcin secretion in the culture medium compared to controls. These effects were more pronounced after 14 days of culture in both populations.SignificanceThe enhancing capabilities on proliferation and osteoblastic differentiation displayed by the phytoestrogen Ferutinin make this compound an interesting candidate to promote bone formation in vivo.     

Cell therapy for spinal cord repair: optimization of biologic scaffolds for survival and neural differentiation of human bone marrow stromal cells

Background aimsThe suppression of cell apoptosis using a biodegradable scaffold to replace the missing or altered extracellular matrix (ECM) could increase the survival of transplanted cells and thus increase the effectiveness of cell therapy.MethodsWe studied the best conditions for the proliferation and differentiation of human bone marrow stromal cells (hBMSC) when cultured on different biologic scaffolds derived from fibrin and blood plasma, and analyzed the best concentrations of fibrinogen, thrombin and calcium chloride for favoring cell survival. The induction of neural differentiation of hBMSC was done by adding to these scaffolds different growth factors, such as nerve growth factor (NGF), brain-derived-neurotrophic factor (BDNF) and retinoic acid (RA), at concentrations of 100 ng/mL (NGF and BDNF) and 1 μ/mL (RA), over 7 days.ResultsAlthough both types of scaffold allowed survival and neural differentiation of hBMSC, the results showed a clear superiority of platelet-rich plasma (PRP) scaffolds, mainly after BDNF administration, allowing most of the hBMSC to survive and differentiate into a neural phenotype.ConclusionsGiven that clinical trials for spinal cord injury using hBMSC are starting, these findings may have important clinical applications.     

Tissue factor pathway inhibitor-2 induced hepatocellular carcinoma cell differentiation

To investigate the effect of over-expression of tissue factor pathway inhibitor-2 (TFPI-2) on the differentiation of hepatocellular carcinoma (HCC) cells (Hep3B and HepG2). The TFPI-2 recombinant adenovirus (pAd-TFPI-2) was constructed using the pAdeasy-1 vector system. Transfected by pAd-TFPI-2, the cell proliferation of HCC cells was evaluated by CCK-8 assay, flow cytometry was used to detect cell apoptosis and CD133 expression. Real-time PCR and Western blot were used to detect the expression levels of markers of hepatocellular cancer stem cells (CSC) and hepatocytes. The over-expression of TFPI-2 significantly suppressed cell proliferation, induced apoptosis, and dramatically decreased the percentage of CD133 cells, which was considered as CSC in HCC. Real-time PCR and Western blot showed that the expression of markers of CSC in Hep3B cells and HepG2 cells infected with pAd-TFPI-2 was markedly lower than those of the control group (P < 0.05), while the expression of markers of hepatocytes was significantly increased (P < 0.05). Hence, TFPI-2 could induce the differentiation of hepatocellular carcinoma cells into hepatocytes, and is expected to serve as a novel way for the treatment of HCC.     

A Comparative Study on In Vitro Osteogenic Priming Potential of Electron Spun Scaffold PLLA/HA/Col,PLLA/HA,and PLLA/Col for Tissue Engineering Application

A comparative study on the in vitro osteogenic potential of electrospun poly-L-lactide/hydroxyapatite/collagen (PLLA/HA/Col, PLLA/HA, and PLLA/Col) scaffolds was conducted. The morphology, chemical composition, and surface roughness of the fibrous scaffolds were examined. Furthermore, cell attachment, distribution, morphology, mineralization, extracellular matrix protein localization, and gene expression of human mesenchymal stromal cells (hMSCs) differentiated on the fibrous scaffolds PLLA/Col/HA, PLLA/Col, and PLLA/HA were also analyzed. The electrospun scaffolds with a diameter of 200–950 nm demonstrated well-formed interconnected fibrous network structure, which supported the growth of hMSCs. When compared with PLLA/H%A and PLLA/Col scaffolds, PLLA/Col/HA scaffolds presented a higher density of viable cells and significant upregulation of genes associated with osteogenic lineage, which were achieved without the use of specific medium or growth factors. These results were supported by the elevated levels of calcium, osteocalcin, and mineralization (P<0.05) observed at different time points (0, 7, 14, and 21 days). Furthermore, electron microscopic observations and fibronectin localization revealed that PLLA/Col/HA scaffolds exhibited superior osteoinductivity, when compared with PLLA/Col or PLLA/HA scaffolds. These findings indicated that the fibrous structure and synergistic action of Col and nano-HA with high-molecular-weight PLLA played a vital role in inducing osteogenic differentiation of hMSCs. The data obtained in this study demonstrated that the developed fibrous PLLA/Col/HA biocomposite scaffold may be supportive for stem cell based therapies for bone repair, when compared with the other two scaffolds.     

Growth and antrum formation of bovine primary follicles in long-term culture in vitro

Successful antral formation in vitro from bovine preantral follicles (145–170 μm) has been described previously, but antrum formation from the primary follicle (50–70 μm) has not yet been achieved in vitro. The aim of the study was to establish an optimal culture system supporting the growth and maturation of bovine primary follicles (50–70 μm) in vitro. Bovine primary follicles were cultured in a three-dimensional culture system for 13 or 21 days in alpha-minimum essential medium. Various treatments including follicle stimulating hormone (FSH), luteinizing hormone (LH), 17β-estradiol (E₂), basic fibroblast growth factor (bFGF) and epidermal growth factor (EGF) were tested. The follicular diameter and antrum formation rate were recorded, and follicular maturation markers (P450 aromatase, CYP19A1; anti-Mullerian hormone, AMH; growth differentiation factor-9, GDF9; bone morphogenetic protein-15, BMP15; and type III transforming growth factor β receptor, TGFβR3) were analyzed by real-time RT-PCR. After 21 days of culture under each treatment condition, the follicular diameter was significantly enlarged in the presence of FSH + LH + E₂ + bFGF or FSH + LH + E₂ + bFGF + EGF (p < 0.05). An addition of 50 ng/ml bFGF or bFGF + 25 ng/ml EGF initiated antrum formation by day 19 and day 17 of culture, and the antral cavity formation rate was 16.7% and 33.3% by 21 days of culture, respectively. The expression of follicular maturation markers (CYP19A1, AMH, GDF9, BMP15 and TGFβR3) was significantly altered. We conclude that addition of 50 ng/ml bFGF + 25 ng/ml EGF to media containing FSH + LH + E₂ turned out to be the most effective optimized culture conditions to support the growth and maturation of bovine primary follicles in vitro.     

Human dental pulp stem cells expressing transforming growth factor β3 transgene for cartilage-like tissue engineering

Background aimsThe aim of this study was to engineer sizable three-dimensional cartilage-like constructs using stem cells isolated from human dental pulp stem cells (DPSCs).MethodsHuman DPSCs were isolated from teeth extracted for orthodontic treatment and enriched further using immuno-magnetic bead selection for stem cell marker CD146. Chondrogenic lineage differentiation of DPSCs induced using recombinant transforming growth factor β3 (TGFβ3) was verified by pellet culture. Because the use of recombinant proteins is associated with rapid degradation and difficult in vivo administration, we constructed the recombinant adeno-associated viral vector encoding human TGFβ3 and determined the best multiplicity of infection for DPSCs. Transduced DPSCs were seeded on poly-l-lactic acid/polyethylene glycol (PLLA/PEG) electrospun fiber scaffolds demonstrating proper attachment, proliferation and viability as shown by scanning electron microscopy micrographs and CCK-8 cell counting kit. Scaffolds seeded with DPSCs were implanted in the back of nude mice.ResultsTransduced DPSCs highly expressed human TGFβ3 for up to 48 days and expressed chondrogenic markers collagen IIa1, Sox9 and aggrecan, as verified by immunohistochemistry and messenger RNA (mRNA). Immunohistochemistry for TGFβ3/DPSC constructs (n = 5/group) showed cartilage-like matrix formation with glycosaminoglycans. In vivo constructs with TGFβ3/DPSCs showed higher collagen type II and Sox9 mRNA expression relative to non-transduced DPSC constructs (n = 5/group). Western blot analysis confirmed this expression pattern on the protein level (n = 3/group).ConclusionsImmuno-selected DPSCs can be successfully differentiated toward chondrogenic lineage, while expressing the chondrogenic inducing factor. Seeded on PLLA/PEG electrospun scaffold, human DPSCs formed three-dimensional cartilage constructs that could prove useful in future treatment of cartilage defects.     

Electrospun PLLA nanofiber scaffolds and their use in combination with BMP-2 for reconstruction of bone defects

Introduction

Adequate migration and differentiation of mesenchymal stem cells is essential for regeneration of large bone defects. To achieve this, modern graft materials are becoming increasingly important. Among them, electrospun nanofiber scaffolds are a promising approach, because of their high physical porosity and potential to mimic the extracellular matrix (ECM).

Materials and Methods

The objective of the present study was to examine the impact of electrospun PLLA nanofiber scaffolds on bone formation in vivo, using a critical size rat calvarial defect model. In addition we analyzed whether direct incorporation of bone morphogenetic protein 2 (BMP-2) into nanofibers could enhance the osteoinductivity of the scaffolds. Two critical size calvarial defects (5 mm) were created in the parietal bones of adult male Sprague-Dawley rats. Defects were either (1) left unfilled, or treated with (2) bovine spongiosa, (3) PLLA scaffolds alone or (4) PLLA/BMP-2 scaffolds. Cranial CT-scans were taken at fixed intervals in vivo. Specimens obtained after euthanasia were processed for histology, histomorphometry and immunostaining (Osteocalcin, BMP-2 and Smad5).

Results

PLLA scaffolds were well colonized with cells after implantation, but only showed marginal ossification. PLLA/BMP-2 scaffolds showed much better bone regeneration and several ossification foci were observed throughout the defect. PLLA/BMP-2 scaffolds also stimulated significantly faster bone regeneration during the first eight weeks compared to bovine spongiosa. However, no significant differences between these two scaffolds could be observed after twelve weeks. Expression of osteogenic marker proteins in PLLA/BMP-2 scaffolds continuously increased throughout the observation period. After twelve weeks osteocalcin, BMP-2 and Smad5 were all significantly higher in the PLLA/BMP-2 group than in all other groups.

Conclusion

Electrospun PLLA nanofibers facilitate colonization of bone defects, while their use in combination with BMP-2 also increases bone regeneration in vivo and thus combines osteoconductivity of the scaffold with the ability to maintain an adequate osteogenic stimulus.     

Optimization of the processing of porcine platelet-rich plasma and its application on human mesenchymal stem cell cultivation

Because of ethical and scientific controversy, the utilization of fetal bovine serum (FBS) for cell culture medium must be minimized. This study develops porcine platelet-rich plasma (P-PRP) as a FBS substitute for human mesenchymal stem cell (hMSC) cultivation. Concentrating porcine blood by serial centrifugation to obtain P-PRP leads to activation by different agonist combinations to stimulate the secretion of growth factors. The concentration of growth factor in P-PRP is significantly increased by activation (p < 0.05). The concentration of PDGF, KGF and TGF-β in activated P-PRP is significantly higher than that in FBS. Design-expert was used to decide whether Co−T+Ca−, Co+T−Ca−, and Co+T+Ca− are optimal agonist formulations. MSC cultivation shows that the attachment rate, proliferation rate and viability of P-PRP supplemented media are significantly higher than those for FBS-supplemented and commercial media (p < 0.05). The results demonstrate that P-PRP is an optimal FBS substitute that supports in vitro h-MSCs expansion for subsequent biomedical applications.     

Encapsulated boron as an osteoinductive agent for bone scaffolds

The aim of this study was to develop boron (B)-releasing polymeric scaffold to promote regeneration of bone tissue. Boric acid-doped chitosan nanoparticles with a diameter of approx. 175 nm were produced by tripolyphosphate (TPP)-initiated ionic gelation process. The nanoparticles strongly attached via electrostatic interactions into chitosan scaffolds produced by freeze-drying with approx. 100 μm pore diameter. According to the ICP-OES results, following first 5 h initial burst release, fast release of B from scaffolds was observed for 24 h incubation period in conditioned medium. Then, slow release of B was performed over 120 h. The results of the cell culture studies proved that the encapsulated boron within the scaffolds can be used as an osteoinductive agent by showing its positive effects on the proliferation and differentiation of MC3T3-E1 preosteoblastic cells.     

Tissue-Engineered Regeneration of Completely Transected Spinal Cord Using Induced Neural Stem Cells and Gelatin-Electrospun Poly (Lactide-Co-Glycolide)/Polyethylene Glycol Scaffolds

Tissue engineering has brought new possibilities for the treatment of spinal cord injury. Two important components for tissue engineering of the spinal cord include a suitable cell source and scaffold. In our study, we investigated induced mouse embryonic fibroblasts (MEFs) directly reprogrammed into neural stem cells (iNSCs), as a cell source. Three-dimensional (3D) electrospun poly (lactide-co-glycolide)/polyethylene glycol (PLGA-PEG) nanofiber scaffolds were used for iNSCs adhesion and growth. Cell growth, survival and proliferation on the scaffolds were investigated. Scanning electron microcopy (SEM) and nuclei staining were used to assess cell growth on the scaffolds. Scaffolds with iNSCs were then transplanted into transected rat spinal cords. Two or 8 weeks following transplantation, immunofluorescence was performed to determine iNSC survival and differentiation within the scaffolds. Functional recovery was assessed using the Basso, Beattie, Bresnahan (BBB) Scale. Results indicated that iNSCs showed similar morphological features with wild-type neural stem cells (wt-NSCs), and expressed a variety of neural stem cell marker genes. Furthermore, iNSCs were shown to survive, with the ability to self-renew and undergo neural differentiation into neurons and glial cells within the 3D scaffolds in vivo. The iNSC-seeded scaffolds restored the continuity of the spinal cord and reduced cavity formation. Additionally, iNSC-seeded scaffolds contributed to functional recovery of the spinal cord. Therefore, PLGA-PEG scaffolds seeded with iNSCs may serve as promising supporting transplants for repairing spinal cord injury (SCI).     

Characterization of subventricular zone-derived progenitor cells from mild and late symptomatic YAC128 mouse model of Huntington's disease

Huntington's disease (HD) is caused by an expansion of CAG repeats in the HTT gene, leading to expression of mutant huntingtin (mHTT) and selective striatal neuronal loss, frequently associated with mitochondrial dysfunction and decreased support of brain-derived neurotrophic factor (BDNF). New neurons derived from the subventricular zone (SVZ) are apparently not able to rescue HD pathological features. Thus, we analyzed proliferation, migration and differentiation of adult SVZ-derived neural stem/progenitor cells (NSPC) from mild (6 month-old (mo)) and late (10 mo) symptomatic HD YAC128 mice expressing full-length (FL)-mHTT versus age-matched wild-type (WT) mice. SVZ cells derived from 6 mo YAC128 mice exhibited higher migratory capacity and a higher number of MAP2 + and synaptophysin + cells, compared to WT cells; MAP2 labeling was enhanced after exposure to BDNF. However, BDNF-evoked neuronal differentiation was not observed in 10 mo YAC128 SVZ-derived cells. Interestingly, 6 mo YAC128 SVZ-derived cells showed increased intracellular Ca²⁺ levels in response to KCl, which was potentiated by BDNF, evidencing the presence of differentiated neurons. In contrast, KCl depolarization-induced intracellular Ca²⁺ increase in 10 mo YAC128 SVZ-derived cells was shown to be increased only in BDNF-treated YAC128 SVZ-derived cells, suggestive of decreased differentiation capacity. In addition, BDNF-untreated NSPC from 10 mo YAC128 mice exhibited lower mitochondrial membrane potential and increased mitochondrial Ca²⁺ accumulation, in relation with NSPC from 6 mo YAC128 mice. Data evidence age-dependent reduced migration and decreased acquisition of a neuronal phenotype, accompanied by decreased mitochondrial membrane potential in SVZ-derived cells from YAC128 mice through HD symptomatic phases.     

Correlation between cell attachment areas after 2 h of culture and osteogenic differentiation activity of rat mesenchymal stem cells on hydroxyapatite substrates with various surface properties

The initial attachment of mesenchymal stem cells (MSCs) to substrates and osteogenic differentiation are supported by culture on a hydroxyapatite substrate. Cell attachment areas of rat MSCs after 2 h of culture on hydroxyapatite substrates with various microstructures and the osteogenic differentiation activity thereafter were measured. The perceived outcome was that, after 2 h of culture, rat MSCs with a small attachment area would have a high osteogenic differentiation activity, whereas those with a large attachment area would have a low osteogenic differentiation activity. Furthermore, rat MSCs with a small attachment area had many cytoplasmic processes, while those with a large attachment area revealed clear stress fibers and focal contacts. These results suggest that cell attachment area of rat MSCs after 2 h of culture has a strong effect on the osteogenic differentiation of rat MSCs. Thus, the measurement of cell attachment area after 2 h of culture could become valuable for estimating the osteogenic differentiation activity of rat MSCs thereafter.