Engineering polyester monomer diversity through novel pathway design

1. Download : Download high-res image (86KB)
2. Download : Download full-size image

     

Antimicrobial hydantoin-containing polyesters

A new N-hydantoin-containing biocompatible and enzymatically degradable polyester with antibacterial properties is presented. Different polyesters of dimethyl succinate, 1,4-butanediol, and 3-[N,N-di(β-hydroxyethyl)aminoethyl]-5,5-dimethylhydantoin in varying molar ratios are prepared via two-step melt polycondensation. The antibacterially active N-halamine form is obtained by subsequent chlorination of the polyesters with sodium hypochlorite. Chemical structures, thermal properties, and spherulitic morphologies of the copolymers are studied adopting FT-IR, NMR, TGA, DSC, WAXD, and POM. The polyesters exhibit antibacterial activity against Escherichia coli. The adopted synthetic approach can be transferred to other polyesters in a straightforward manner.     

Metal complexes of polyesters

Polyesters obtained from 2,5-dihydroxyterephthalic acid and 1,n-alkanediols were used to complexate the metal ions Mg²⁺, Ca²⁺, Sn²⁺, Pb²⁺, Ga³⁺, In³⁺, Bi³⁺, Si⁴⁺, Ce³⁺, UO₂²⁺, Mn²⁺, Mn³⁺, Co²⁺, Ni²⁺, Cu²⁺, Zn²⁺ and Cd²⁺. The metal ions are always six-coordinated with additional ligands (mostly H₂O) besides the four from the polyester system. The H₂O-ligands can be removed by heating in vacuum, as was proven for the complexes of Mn²⁺, Co²⁺, Ni²⁺ and Cu²⁺, and are added again in moist air. For the waterfree Ni²⁺-complex a tetrahedral surrounding is suggested by magnetic measurements. Polymerization degrees of the polyesters were found to be 30–70 by the membrane osmometric method. Thermal stabilities of the metal complexes (200– 300 °C) are less than those of the polyesters themselves (300–350 °C).     

Lipase-catalyzed synthesis of aromatic polyesters

The enzymatic synthesis of aromatic polyesters by direct polyesterification between a diacid and a diol is described. The effects of the type of substrate, type and quantities of lipase, temperature, vacuum, and reaction time on the synthesis of aromatic polyesters were studied in detail. Among three lipases investigated, only Novozym 435 worked well for aromatic polyester synthesis. Temperature and vacuum played an important role in obtaining a high molar mass of the aromatic polyesters. Furthermore, with isophthalic acid and 1,6-hexanediol as substrates, the mass average molar mass of the polyester obtained increased with an increase in the lipase quantity up to 0.375 g (11.7%, w/w of total reactor contents). The mass average molar mass of the polyester was as high as 50000 g mol⁻¹ in 168 h, with a polydispersity of PD ≈ 1.4. Received 27 January 1998/ Accepted in revised form 19 May 1998     

Microbial production of lactate-containing polyesters

Due to our increasing concerns on environmental problems and limited fossil resources, biobased production of chemicals and materials through biorefinery has been attracting much attention. Optimization of the metabolic performance of microorganisms, the key biocatalysts for the efficient production of the desired target bioproducts, has been achieved by metabolic engineering. Metabolic engineering allowed more efficient production of polyhydroxyalkanoates, a family of microbial polyesters. More recently, non-natural polyesters containing lactate as a monomer have also been produced by one-step fermentation of engineered bacteria. Systems metabolic engineering integrating traditional metabolic engineering with systems biology, synthetic biology, protein/enzyme engineering through directed evolution and structural design, and evolutionary engineering, enabled microorganisms to efficiently produce natural and non-natural products. Here, we review the strategies for the metabolic engineering of microorganisms for the in vivo biosynthesis of lactate-containing polyesters and for the optimization of whole cell metabolism to efficiently produce lactate-containing polyesters. Also, major problems to be solved to further enhance the production of lactate-containing polyesters are discussed.     

Biocatalytic synthesis of fluorinated polyesters

The biocatalytic synthesis of fluorinated polyesters from activated diesters and fluorinated diols has been investigated. The effects of time, continuous enzyme addition, enzyme concentration, and diol chain length were studied to determine the factors that would limit chain extension, such as enzyme inactivation, enzyme specificity, the equilibrium position for the reaction, hydrolytic side reactions, and polymer precipitation. An enzyme screen demonstrated that only Novozym 435, an immobilized lipase from Candida antarctica, was effective in producing the fluorinated polyester. Molecular weight and polydispersity analyses were performed by means of gel permeation chromatography. End group analysis was accomplished through the use of matrix-assisted laser desorption/ionization time-of-flight mass spectroscopy. Polymer molecular weight steadily increased and then leveled off after approximately 30 h, with a weight average molecular weight of approximately 1773. The majority of the polymer chains were terminated with either hydroxyl or vinyl groups. Polymers that were synthesized from bulk monomers had higher molecular weights, but high enzyme concentrations were required. Enzyme specificity toward shorter chain fluorinated diols appeared to be the governing factor in limiting chain growth. However, polymer molecular weight increased further (M(w) = 8094) when a fluorinated diol that contained an additional methylene spacer between the fluorine atoms and hydroxyl groups was used.     

Review Degradation of microbial polyesters

Microbial polyhydroxyalkanoates (PHAs), one of the largest groups of thermoplastic polyesters are receiving much attention as biodegradable substitutes for non-degradable plastics. Poly(D-3-hydroxybutyrate) (PHB) is the most ubiquitous and most intensively studied PHA. Microorganisms degrading these polyesters are widely distributed in various environments. Although various PHB-degrading microorganisms and PHB depolymerases have been studied and characterized, there are still many groups of microorganisms and enzymes with varying properties awaiting various applications. Distributions of PHB-degrading microorganisms, factors affecting the biodegradability of PHB, and microbial and enzymatic degradation of PHB are discussed in this review. We also propose an application of a new isolated, thermophilic PHB-degrading microorganism, Streptomyces strain MG, for producing pure monomers of PHA and useful chemicals, including D-3-hydroxycarboxylic acids such as D-3-hydroxybutyric acid, by enzymatic degradation of PHB.     

Metabolic engineering for the synthesis of polyesters: A 100-year journey from polyhydroxyalkanoates to non-natural microbial polyesters

As concerns increase regarding sustainable industries and environmental pollutions caused by the accumulation of non-degradable plastic wastes, bio-based polymers, particularly biodegradable plastics, have attracted considerable attention as potential candidates for solving these problems by substituting petroleum-based plastics. Among these candidates, polyhydroxyalkanoates (PHAs), natural polyesters that are synthesized and accumulated in a range of microorganisms, are considered as promising biopolymers since they have biocompatibility, biodegradability, and material properties similar to those of commodity plastics. Accordingly, substantial efforts have been made to gain a better understanding of mechanisms related to the biosynthesis and properties of PHAs and to develop natural and recombinant microorganisms that can efficiently produce PHAs comprising desired monomers with high titer and productivity for industrial applications.Recent advances in biotechnology, including those related to evolutionary engineering, synthetic biology, and systems biology, can provide efficient and effective tools and strategies that reduce time, labor, and costs to develop microbial platform strains that produce desired chemicals and materials. Adopting these technologies in a systematic manner has enabled microbial fermentative production of non-natural polyesters such as poly(lactate) [PLA], poly(lactate-co-glycolate) [PLGA], and even polyesters consisting of aromatic monomers from renewable biomass-derived carbohydrates, which can be widely used in current chemical industries.In this review, we present an overview of strain development for the production of various important natural PHAs, which will give the reader an insight into the recent advances and provide indicators for the future direction of engineering microorganisms as plastic cell factories. On the basis of our current understanding of PHA biosynthesis systems, we discuss recent advances in the approaches adopted for strain development in the production of non-natural polyesters, notably 2-hydroxycarboxylic acid-containing polymers, with particular reference to systems metabolic engineering strategies.     

Biodegradation of polyesters containing aromatic constituents

Polymers, which undergo a controlled biological degradation by micro-organisms came to remarkable interest during the last years. Composting for instance could so be established as an alternative waste management system for parts of the plastic waste. Within this group of innovative polymer, polyesters play a predominant role, due to their potentially hydrolyzable ester bonds. While aromatic polyesters such as poly(ethylene terephthalate) exhibit excellent material properties but proved to be almost resistant to microbial attack, many aliphatic polyesters turned out to be biodegradable but lack in properties, which are important for application. To combine good material properties with biodegradability, aliphatic-aromatic copolyesters have been developed as biodegradable polymers for many years. This article reviews the attempts to combine aromatic and aliphatic structures in biodegradable plastics and work, which has been done to evaluate the degradation behaviour and environmental safety of biodegradable polyesters, containing aromatic constituents.     

Chemical modification of chlorinated microbial polyesters

Chlorination of microbial polyesters poly(3-hydroxybutyrate) (PHB) and poly(3-hydroxyoctanoate) (PHO) was carried out by passing chlorine gas through their solutions. The chlorine contents in chlorinated PHB (PHB-Cl) and chlorinated PHO (PHO-Cl) were between 5.45 and 23.81 wt % and 28.09 and 39.09 wt %, respectively. Molecular weights of the chlorinated samples were in the range of between one-half to one-fourth of the original values because of hydrolysis during the chlorination process. Thermal properties of the PHO-Cl were dramatically changed with an increase in its glass transition (T(g) = 2 degrees C) and the melting transition (T(m)). The T(g) of PHB-Cl varied from -20 to 10 degrees C, and its T(m) decreased to 148 degrees C. The chlorinated poly(3-hydroxyalkanoate)s (PHA-Cl) were converted to their corresponding quaternary ammonium salts (PHA-N(+)R(3)), sodium sulfate salts (PHA-S), and phenyl derivatives (PHA-Ph). Cross-linked polymers were also formed by a Friedel-Crafts reaction between benzene and PHA-Cl. The modified PHO derivatives were characterized by (1)H NMR and (13)C NMR spectrometry, Fourier transform infrared spectroscopy, gel permeation chromatography, and differential scanning calorimetry techniques.     

Hydrolysis of polyesters by serine proteases

The substrate specificity of -chymotrypsin and other serine proteases, trypsin, elastase, proteinase K and subtilisin, towards hydrolysis of various polyesters was examined using poly(L-lactide) (PLA), poly(-hydroxybutyrate) (PHB), poly(ethylene succinate) (PES), poly(ethylene adipate) (PEA), poly(butylene succinate) (PBS), poly(butylene succinate-co-adipate) (PBS/A), poly[oligo(tetramethylene succinate)-co-(tetramethylane carbonate)] (PBS/C), and poly(-caprolactone) (PCL). -Chymotrypsin could degrade PLA and PEA with a lower activity on PBS/A. Proteinase K and subtilisin degraded almost all substrates other than PHB. Trypsin and elastase had similar substrate specificities to -chymotrypsin.     

Membrane perturbing properties of sucrose polyesters

Sucrose polyester (SPE), in the form of sucrose octaesters and sucrose hexaesters of palmitic (16:0), stearic (18:0), oleic (18:1cis), and linoleic (18:2cis) acids, have many uses. Applications include: a non-caloric fat substitute, detoxification agent, and oral contrast agent for human abdominal (MRI) magnetic resonance imaging. However, it has been shown that the ingestion of SPE was shown to generate a depletion of physiologically important lipidic vitamins and other lipophilic molecules. In order to better understand, at the molecular level, the type of interaction between SPE and lipid membrane, we have, first synthesized different type of labelled and non-labelled SPEs. Secondly, we have studied the effect of SPEs on multilamellar dispersions of dielaidoylphosphatidylethanolamine (DEPE) and dipalmitoylphosphocholine (DPPC) as a function of temperature, SPE composition and concentration. The effects of SPEs were studied by differential scanning calorimetry (DSC), X-ray diffraction, 2H and 31P NMR spectroscopy. At low concentration (< 1 mol%) all of the SPEs lowered the bilayer to the inverted hexagonal phase transition temperature of DEPE and induced the formation of a cubic phase in a composition dependent manner. At the same low concentration, SPEs in DPPC induce the formation of a non-bilayer phase as seen by 31P NMR. Order parameter measurements of DPPC-d62/SPE mixtures show that the SPE effect on the DPPC monolayer thickness is dependent on the SPE, concentration, chains length and saturation level. At higher concentration (> or = 10 mol%) SPE are very potent DEPE bilayer to HII phase transition promoters, although at that concentration the SPE have lost the ability to form cubic phases. SPEs have profound effects on the phase behaviour of model membrane systems, and may be important to consider when developing current and potential industrial and medical applications.     

脂肪酶催化的末端官能化聚酯合成研究进展

脂肪酶催化的末端官能化聚酯合成是高分子合成领域中极具吸引力且发展非常迅速的重要技术：重点介绍引发剂法、终止剂法以及酶促化学偶联合成末端官能化聚酯研究所取得的主要进展。     

Macrolactones and polyesters from ricinoleic acid

A systematic study on the synthesis, characterization, and polymerization of ricinoleic acid (RA) lactone is reported. Ricinoleic acid lactones were synthesized by refluxing pure ricinoleic acid in chloroform (10 mg/mL) with dicyclohexylcarbodimide and (dimethylamino)pyridine as catalyst. Purification of RA lactones was performed by silica gel chromatography. The reaction resulted in a 75% yield of ricinoleic acid lactones. IR and NMR analysis confirmed the formation of cyclic compounds. Polymerization of the ricinoleic acid lactones with catalysts commonly used for ring-opening polymerization of lactones, under specific reaction conditions, resulted in oligomers. Copolymerization with lactide (LA) by ring-opening polymerization, using Sn(Oct) as catalyst, yielded copolyesters with molecular weights (M(w)) in the range of 5000-16000 and melting temperatures of 100-130 degrees C for copolymers containing 10-50% w/w ricinoleic acid residues. Degradation studies of the copolymers were performed in 0.1 M phosphate buffer solution, pH 7.4, at 37 degrees C. P(LA-RA)s with up to 20% w/w RA slowly degraded and released only approximately 7% of its lactic acid content after 60 days of study, while pure PLA under similar conditions released more than 20% of its lactic acid content. On the other hand, copolyesters containing more then 20% w/w RA degraded and released lactic acid faster than pure PLA due to the low crystallinity of the copolymers.     

Production of unsaturated polyesters by Pseudomonas oleovorans

Pseudomonas oleovorans was grown separately on 3-hydroxy-6-octenoic acid and 3-hydroxy-7-octenoic acid as the only carbon source and under ammonium nutrient-limiting conditions to produce storage polyesters. The polyesters produced contained mainly unsaturated C8 units. Small amounts of both the saturated and the unsaturated C6 units were also present, but only about 1% of the saturated 3-hydroxyoctanoate units was detected. The polyester obtained from 3-hydroxy-6-octenoic acid, which was a mixture of the cis and trans isomers, also contained units with cis and trans double bonds. The weight average molecular weights of the polymers produced were in the range of 339,000-383,000 as determined by g.p.c. relative to polystyrene, with Mw/Mn ratios of 1.8-2.1. The mechanism of PHA formation from n-octene previously reported is discussed in relation to the present results, and the two were found to be in good agreement.     

Jatrophane polyesters from the leaves of Euphorbia peplus with anti-inflammatory activity

Three new jatrophane polyesters, Euphopepluanones M-O (1–3), along with eight known ones (4-11), were isolated from the leaves of Euphorbia peplus Linn. Their chemical structures were established based on extensive spectroscopic analysis. The absolute configurations of compound 1 were assigned by X-ray crystallographic analysis. In addition, their anti-inflammatory effects on lipopolysaccharide-induced RAW264.7 macrophages were evaluated in vitro. Among them, 2 and 7 exhibited significant anti-inflammatory activity.     

Enzymatic synthesis of polyesters by lipase catalysed polytrans-esterification

Summary Biocatalytic synthesis of polyester of the type (AA-BB)_h using a new diester, viz bis(2, 3 butane dione monoxime) alkane dioate by lipase catalysed transesterification with different primary diols has been studied. Weight average molecular weight (M_w) of the polyester was analysed by gel permeation chromatography (GPC). Number average molecular weight (M_n) of polyesters were measured by end group analysis and confirmed by vapour pressure osmometry (VPO). Solvent effect on the yield, M_n and M_w of the polymer was studied. The catalytic activity of different lipases are compared.