Diffusion and Partitioning of Fluorescent Lipid Probes in Phospholipid Monolayers

The pressure-dependent diffusion and partitioning of single lipid fluorophores in DMPC and DPPC monolayers were investigated with the use of a custom-made monolayer trough mounted on a combined fluorescence correlation spectroscopy (FCS) and wide-field microscopy setup. It is shown that lipid diffusion, which is essential for the function of biological membranes, is heavily influenced by the lateral pressure and phase of the lipid structure. Both of these may change dynamically during, e.g., protein adsorption and desorption processes. Using FCS, we measured lipid diffusion coefficients over a wide range of lateral pressures in DMPC monolayers and fitted them to a free-area model as well as the direct experimental observable mean molecular area. FCS measurements on DPPC monolayers were also performed below the onset of the phase transition (Π < 5 mN/m). At higher pressures, FCS was not applicable for measuring diffusion coefficients in DPPC monolayers. Single-molecule fluorescence microscopy and differential scanning calorimetry clearly showed that this was due to heterogeneous partitioning of the lipid fluorophores in condensed phases. The results were compared with dye partitioning in giant lipid vesicles. These findings are significant in relation to the application of lipid fluorophores to study diffusion in both model systems and biological systems.     

Insertion behavior of the Bacillus thuringiensis Cry4Ba insecticidal protein into lipid monolayers

Toxicity mechanisms of Bacillus thuringiensis Cry insecticidal proteins involve membrane insertion and lytic pore formation in lipid bilayers of the target larval midgut cell membranes. The B. thuringiensis Cry4Ba mosquito-larvicidal protein has been shown to be capable of permeabilizing liposome vesicles and of forming ion channels in planar lipid bilayers. Here, the membrane interaction of the 65-kDa activated Cry4Ba protein with the lipid monolayers, comprising dipalmitoyl phosphatidylcholine, dioleoyl phosphatidylethanolamine, and cholesterol (Chol), was studied using Langmuir-Blodgett technique. The interactions of the Cry4Ba protein with the lipid monolayers were measured from the surface pressure versus area isotherms of the protein-lipid monolayers. The increase in the mean molecular area was demonstrated as an incorporation of the protein into lipid monolayers. The insertion of the Cry4Ba protein was monitored by measuring as an increase of the surface pressure at constant molecular area. For a given monolayer, the membrane insertion of the Cry4Ba reduced as the initial surface pressure increased. The Cry4Ba protein showed a strong preference of an insertion towards a Chol monolayer. In addition, the mixed monolayers of Chol showed an enhanced effect on the insertion kinetics of Cry4Ba into lipid films, suggesting its involvement in the modulation of the protein insertion. These findings provide the first evidence that the Cry4Ba protein is capable of inserting itself into lipid monolayers, depending on the packing density of the monolayers. Our results also indicate that only a limited part of the protein is likely to be involved in the insertion.     

Fluid and condensed ApoA-I/phospholipid monolayers provide insights into ApoA-I membrane insertion

Apolipoprotein A-I (ApoA-I) is a protein implicated in the solubilization of lipids and cholesterol from cellular membranes. The study of ApoA-I in phospholipid (PL) monolayers brings relevant information about ApoA-I/PL interactions. We investigated the influence of PL charge and acyl chain organization on the interaction with ApoA-I using dipalmitoyl-phosphatidylcholine, dioleoyl-phosphatidylcholine and dipalmitoyl-phosphatidylglycerol monolayers coupled to ellipsometric, surface pressure, atomic force microscopy and infrared (polarization modulation infrared reflection-absorption spectroscopy) measurements. We show that monolayer compressibility is the major factor controlling protein insertion into PL monolayers and show evidence of the requirement of a minimal distance between lipid headgroups for insertion to occur, Moreover, we demonstrate that ApoA-I inserts deepest at the highest compressibility of the protein monolayer and that the presence of an anionic headgroup increases the amount of protein inserted in the PL monolayer and prevents the steric constrains imposed by the spacing of the headgroup. We also defined the geometry of protein clusters into the lipid monolayer by atomic force microscopy and show evidence of the geometry dependence upon the lipid charge and the distance between headgroups. Finally, we show that ApoA-I helices have a specific orientation when associated to form clusters and that this is influenced by the character of PL charges. Taken together, our results suggest that the interaction of ApoA-I with the cellular membrane may be driven by a mechanism that resembles that of antimicrobial peptide/lipid interaction.     

Helical crystallization on lipid nanotubes: streptavidin as a model protein

In this study, we use streptavidin (SA) as a model system to study helical protein array formation on lipid nanotubes, an alternative to 2D studies on lipid monolayers. We demonstrate that wild-type and a mutant form of SA form helical arrays on biotinylated lipid nanotubes. 3D maps from helical arrays of wild-type and mutant SA were reconstructed using two different approaches: Fourier-Bessel methods and an iterative single particle algorithm. The maps show that wild-type and mutant streptavidin molecules order differently. The molecular packing arrangements of SA on the surface of the lipid nanotubes differ from previously reported lattice packing of SA on biotinylated monolayers. Helical crystallization on lipid nanotubes presents an alternative platform to explore fundamentals of protein ordering, intermolecular protein interaction and phase behavior. We demonstrate that lipid nanotubes offer a robust and reproducible substrate for forming helical protein arrays which present a means for studying protein structure and structure-function relationships.     

Many length scales surface fractality in monomolecular films of whole myelin lipids and proteins

Monomolecular films prepared with all the lipid and protein components of myelin were spread at the air/aqueous buffer interface from isolated bovine spinal cord myelin fully dissolved in chloroform:methanol (2:1) or by surface free energy shock of myelin membrane microvesicles. These monolayers show indistinguishable surface behavior, with similar compositional phase coexistence through all the compression isotherm on several subphase conditions. The domains were observed through epifluorescence and Brewster angle microscopy on the air/water interface and on Langmuir-Blodgett films. Their thickness was measured ellipsometrically. Under molecular packing conditions resembling those found in the natural membrane, the morphology and size of the domains are highly self-similar, displaying no characteristic length scale. These properties are the hallmark of fractal objects. The fractality extends at least three orders of magnitudes, from the micrometer to the millimeter range, the fractal dimension being about 1.7. A possible implication of fractality in membrane structure and/or function is demonstrated through the high fluctuation of the propagation of signals through constrained diffusion in corrals formed by domains in the plane of the monolayer, which restricts the diffusion of a fluorescent probe over many length scale domains.     

Fluorescence correlation spectroscopy with single-molecule sensitivity on cell and model membranes.

We report on the successful application of fluorescence correlation spectroscopy (FCS) to the analysis of single fluorescently labeled lipid analogue molecules diffusing laterally in lipid bilayers, as exemplified by time traces of fluorescence bursts of individual molecules entering and leaving the excitation area. FCS measurements performed on lipid probes in rat basophilic leukemia cell membranes showed deviations from two-dimensional Brownian motion with a single uniform diffusion constant. Giant unilamellar vesicles were employed as model systems to characterize diffusion of fluorescent lipid analogues in both homogeneous and mixed lipid phases with diffusion heterogeneity. Comparing the results of cell membrane diffusion with the findings on the model systems suggests possible explanations for the observations: (a) anomalous subdiffusion in which evanescent attractive interactions with disparate mobile molecules modifies the diffusion statistics; (b) alternatively, probe molecules are localized in microdomains of submicroscopic size, possibly in heterogeneous membrane phases.     

Zero mode waveguides for single-molecule spectroscopy on lipid membranes

Zero mode waveguides (ZMWs), subwavelength optical nanostructures with dimensions ranging from 50 to 200 nm, have been used to study systems involving ligand-receptor interactions. We show that under proper conditions, lipid membranes will invaginate into the nanostructures, which confine optical excitation to subattoliter volumes. Fluorescence correlation spectroscopy (FCS) was used to characterize the diffusion of fluorescently tagged lipids in liquid-disordered phase 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC) and gel phase 1,2-distearoyl-sn-glycero-3-phosphocholine (DSPC) membranes incubated on the nanostructured surface. In contrast to the POPC, DSPC membranes did not appear to enter the structures, suggesting that invagination is dependent on membrane rigidity. Although correlation curves obtained from POPC membranes conformed to previously derived models for diffusion in the evanescent field within the nanostructure, the diffusion constants obtained were systematically lower than expected. The validity of the one-dimensional diffusion model for membrane diffusion is discussed and it is concluded that the erroneous diffusion constants are a result of nontrivial membrane conformation within the ZMWs. Additionally, FCS was used to characterize the fraction of fluorescently labeled tetanus toxin C fragment bound to a ganglioside-populated POPC membrane within the ZMWs. This allowed the determination of the toxin's equilibrium binding constant at a concentration of 500 nM; higher than possible with diffraction-limited FCS. To our knowledge, the results presented here are the first reported for supported lipid bilayers in nanostructured devices. Furthermore, they open the possibility of studying membrane imbedded receptors and proteins at physiological concentrations with single-molecule resolution.     

The lateral diffusion of lipid probes in the surface membrane of Schistosoma mansoni

The technique of fluorescence recovery after photobleaching was used to measure the lateral diffusion of fluorescent lipid analogues in the surface membrane of Schistosoma mansoni. Our data reveal that although some lipids could diffuse freely others exhibited restricted lateral diffusion. Quenching of lipid fluorescence by a non-permeant quencher, trypan blue, showed that there was an asymmetric distribution of lipids across the double bilayer of mature parasites. Those lipids that diffused freely were found to reside mainly in the external monolayer of the outer membrane whereas lipids with restricted lateral diffusion were located mainly in one or more of the monolayers beneath the external monolayer. Formation of surface membrane blebs allowed us to measure the lateral diffusion of lipids in the membrane without the influence of underlying cytoskeletal structures. The restricted diffusion found on the normal surface membrane of mature parasites was found to be released in membrane blebs. Quenching of fluorescent lipids on blebs indicated that all probes were present almost entirely in the external monolayer. Juvenile worms exhibited lower lateral diffusion coefficients than mature parasites: in addition, the lipids partitioned into the external monolayer. The results are discussed in terms of membrane organization, cytoskeletal contacts, and biological significance.     

Peripheral protein adsorption to lipid-water interfaces: the free area theory

In fluid monolayers approaching collapse, phospholipids and their complexes with diacylglycerols hinder adsorption to the monolayer of the amphipathic protein, colipase. Herein, a statistical, free-area model, analogous to that used to analyze two-dimensional lipid diffusion, is developed to describe regulation by lipids of the initial rate of protein adsorption from the bulk aqueous phase to the lipid-water interface. It is successfully applied to rate data for colipase adsorption to phospholipid alone and yields realistic values of the two model parameters; the phospholipid excluded area and the critical free surface area required to initiate adsorption. The model is further developed and applied to analyze colipase adsorption rates to mixed monolayers of phospholipid and phospholipid-diacylglycerol complexes. The results are consistent with complexes being stably associated over the physiologically relevant range of lipid packing densities and being randomly distributed with uncomplexed phospholipid molecules. Thus, complexes should form in fluid regions of cellular membranes at sites of diacylglycerol generation. If so, by analogy with the behavior of colipase, increasing diacylglycerol may not trigger translocation of some amphipathic peripheral proteins until its abundance locally exceeds its mole fraction in complexes with membrane phospholipids.     

Cholera toxin assault on lipid monolayers containing ganglioside GM1

Many bacterial toxins bind to and gain entrance to target cells through specific interactions with membrane components. Using neutron reflectivity, we have characterized the structure of mixed DPPE:GM(1) lipid monolayers before and during the binding of cholera toxin (CTAB(5)) or its B-subunit (CTB(5)). Structural parameters such as the density and thickness of the lipid layer, extension of the GM(1) oligosaccharide headgroup, and orientation and position of the protein upon binding are reported. The density of the lipid layer was found to decrease slightly upon protein binding. However, the A-subunit of the whole toxin is clearly located below the B-pentameric ring, away from the monolayer, and does not penetrate into the lipid layer before enzymatic cleavage. Using Monte Carlo simulations, the observed monolayer expansion was found to be consistent with geometrical constraints imposed on DPPE by multivalent binding of GM(1) by the toxin. Our findings suggest that the mechanism of membrane translocation by the protein may be aided by alterations in lipid packing.     

Lateral Membrane Diffusion Modulated by a Minimal Actin Cortex

Diffusion of lipids and proteins within the cell membrane is essential for numerous membrane-dependent processes including signaling and molecular interactions. It is assumed that the membrane-associated cytoskeleton modulates lateral diffusion. Here, we use a minimal actin cortex to directly study proposed effects of an actin meshwork on the diffusion in a well-defined system. The lateral diffusion of a lipid and a protein probe at varying densities of membrane-bound actin was characterized by fluorescence correlation spectroscopy (FCS). A clear correlation of actin density and reduction in mobility was observed for both the lipid and the protein probe. At high actin densities, the effect on the protein probe was ∼3.5-fold stronger compared to the lipid. Moreover, addition of myosin filaments, which contract the actin mesh, allowed switching between fast and slow diffusion in the minimal system. Spot variation FCS was in accordance with a model of fast microscopic diffusion and slower macroscopic diffusion. Complementing Monte Carlo simulations support the analysis of the experimental FCS data. Our results suggest a stronger interaction of the actin mesh with the larger protein probe compared to the lipid. This might point toward a mechanism where cortical actin controls membrane diffusion in a strong size-dependent manner.     

Parameters modulating the maximum insertion pressure of proteins and peptides in lipid monolayers

The lipid monolayer model membrane is useful for studying the parameters responsible for protein and peptide membrane binding. Different approaches have been used to determine the extent of protein and peptide binding to lipid monolayers. This review focuses on the use of the “maximum insertion pressure” (MIP) to estimate the extent of protein and peptide penetration in lipid monolayers. The MIP data obtained with different proteins and peptides have been reviewed and discussed which allowed to draw conclusions on the parameters modulating the monolayer binding of proteins and peptides. In particular, secondary structure components such as amphipathic α-helices of proteins and peptides as well as electrostatic interactions play important roles in monolayer binding. The MIPs have been compared to the estimated lateral pressure of biomembranes which allowed to evaluate the possible association between proteins or peptides with natural membranes. For example, the MIP of a membrane-anchored protein with a glycosylphosphatidylinositol (GPI) was found to be far below the estimated lateral pressure of biomembranes. This allowed us to conclude that this protein is probably unable to penetrate the membrane and should thus be hanged at the membrane surface by use of its GPI lipid anchor. Moreover, the values of MIP obtained with myristoylated and non-myristoylated forms of calcineurin suggest that the myristoyl group does not contribute to monolayer binding. However, the acylation of a peptide resulted in a large increase of MIP. Finally, the physical state of lipid monolayers can have a strong effect on the values of MIP such that it is preferable to perform measurements with lipids showing a single physical state. Altogether the data show that the measurement of the maximum insertion pressure provides very useful information on the membrane binding properties of proteins and peptides although uncertainties must be provided to make sure the observed differences are significant.     

Interaction of chitosan with cell membrane models at the air-water interface

In this paper we employed phospholipid Langmuir monolayers as membrane models to probe interactions with chitosan. Using a combination of surface pressure--area and surface potential--area isotherms and rheological measurements with the pendent drop technique, we observed that chitosan interacts with phospholipid molecules at the air-water interface. We propose a model in which chitosan interacts with the phospholipids mainly through electrostatic interactions, but also including H-bonding and hydrophobic forces, depending on the phospholipid packing density. At large areas per molecule, chitosan in the subphase adsorbs onto the monolayer, expanding it. At small areas per molecule, chitosan is located in the subsurface. Indeed, a mixed chitosan-phospholipid monolayer can be transferred onto solid supports, even at high surface pressures. The effects of chitosan on the viscoelastic properties of phospholipid monolayers may be taken as evidence for the ability of chitosan to disrupt cell membranes.     

Surface Properties and Behavior of Lipid Extracts from Plasma Membranes of Cells Cultured as Monolayer and in Tissue-Like Conditions

The differences in the surface active properties of native lipids extracted from plasma membranes of cells cultured as a monolayer and in three-dimensional (3D) matrix were investigated. This experimental model was chosen because most of the current knowledge on cellular physiological processes is based on studies performed with conventional monolayer two-dimensional (2D) cell cultures, where cells are forced to adjust to unnaturally rigid surfaces that differ significantly from the natural matrix surrounding cells in living organisms. Differences between monolayer and 3D cells were observed in the lipid composition of plasma membranes and especially in the level of the two major microdomain-forming lipids—sphingomyelin (SM) and cholesterol, which were significantly elevated in 3D cells. The obtained results showed that culturing of cells in in vivo-like environment affected the surface active properties of plasma membrane lipids at interfaces which might influence certain membrane-associated interface processes. The detected differences in the lipid levels in 2D and 3D cell extracts affected significantly the behavior of the model lipid monolayers at the air–water interface (Langmuir monolayers) which resulted in different values of the monolayer equilibrium (γ_eq) and dynamic (γ_max, γ_min) surface tension and surface potential. Compensation of the SM content in extracts of 2D cell cultures up to a level close to the one measured in 3D cells approximated the monolayer properties to the values observed for 3D cells. These results implied that the interactions between the cells and the surrounding medium affected the level of plasma membrane SM and other lipids, which had a strong impact on the surface properties of lipid monolayers, such as γ_eq, γ_max, and γ_min, the compression/decompression curve shape, the hysteresis area during cycling of the monolayers, etc. We suggest that the elevated content of SM observed in plasma membranes of 3D fibroblasts could be responsible for an increased rigidity and possibly reduced permeability of cells cultured in 3D environment. The current results provide useful information that should be taken into account in the interpretation of the membrane physico-chemical properties of cells cultured under different conditions.     

Lipid-Membrane Affinity of Chimeric Metal-binding Green Fluorescent Protein

The Green Fluorescent Protein (GFP) is a useful marker to trace the expression of cellular proteins. However, little is known about changes in protein interaction properties after fusion to GFP. In this study, we present evidence for a binding affinity of chimeric cadmium-binding green fluorescent proteins to lipid membrane. This affinity has been observed in both cellular membranes and artificial lipid monolayers and bilayers. At the cellular level, the presence of Cd-binding peptide promoted the association of the chimeric GFP onto the lipid membrane, which declined the fluorescence emission of the engineered cells. Binding affinity to lipid membranes was further investigated using artificial lipid bilayers and monolayers. Small amounts of the chimeric GFP were found to incorporate into the lipid vesicles due to the high surface pressure of bilayer lipids. At low interfacial pressure of the lipid monolayer, incorporation of the chimeric Cd-binding GFP onto the lipid monolayer was revealed. From the measured lipid isotherms, we conclude that Cd-binding GFP mediates an increase in membrane fluidity and an expansion of the surface area of the lipid film. This evidence was strongly supported by epifluorescence microscopy, showing that the chimeric Cd-binding GFP preferentially binds to fluid-phase areas and defect parts of the lipid monolayer. All these findings demonstrate the hydrophobicity of the GFP constructs is mainly influenced by the fusion partner. Thus, the example of a metal-binding unit used here shines new light on the biophysical properties of GFP constructs.This revised version was published online in June 2005 with a corrected cover date.     

The membrane-binding properties of a class A amphipathic peptide

The membrane-binding properties of a class A amphipathic peptide (18D) were investigated using two different immobilized model membrane systems. The first system involved the use of surface plasmon resonance (SPR) to study the binding of 18D to dimyristylphosphatidylcholine (DMPC) and dimyristylphosphatidylglycerol (DMPG), which allowed peptide binding to be monitored in real time. The SPR experiments indicated stronger binding of 18D to DMPG than DMPC, which kinetic analysis revealed was due to a faster on-rate. The second model membrane system involved immobilized membrane chromatography in which the binding of 18D to either DMPC or DMPG monolayers covalently linked to silica particles was analysed by elution chromatography. Stronger binding affinity of 18D was also obtained with the negatively charged phosphatidylglycerol (PG) monolayer compared to the phosphatidylcholine (PC) monolayer, which was consistent with the SPR results. Non-linear binding behaviour of 18D to the immobilized lipid monolayers was also observed, which suggests that the peptide undergoes conformational and orientational changes upon binding to the immobilized PC and PG ligands. Significant band broadening was also observed on both monolayers, with larger bandwidths obtained on the PC surface, indicating slower binding and orientation kinetics with the zwitterionic surface. The dependence of logk' on the percentage of methanol also demonstrated a bimodal interaction whereby hydrophobic forces predominated at higher temperatures and methanol concentrations, while at lower temperatures, electrostatic and other polar forces also made a contribution to the affinity of the peptides for the lipid monolayer particularly. Overall, these results demonstrate the complementary use of these two lipid biosensors which allows the role of hydrophobic and electrostatic forces in peptide–membrane interactions to be studied and insight gained into the kinetic factors associated with these interactions.     

Real-time measurement of solute partitioning to lipid monolayers

The interaction of a peripheral protein with a lipid-water interface can show a pronounced dependence on the composition and two-dimensional packing density of the lipids that comprise the interface. We report a novel optical method for measuring the adsorption of macromolecules, such as proteins and nucleic acids, and smaller solutes, such as drugs, to lipid monolayers at the gas-liquid interface. Using fluorescence emission from proteins and a small molecule, we demonstrate that the emissions from these solutes when in the aqueous phase and when associated with the monolayer can be temporally separated. Such separation allows measurement of the extent of solute adsorption, spectral characterization of the adsorbed solute, and characterization of lipid organization using adsorption kinetics. The method does not require, but is compatible with, the solute having different spectral properties in the bulk and surface phases. Indeed, if optical signals from adsorbed and soluble solute are the same or their relationship is known, absolute surface excess of adsorbed solute can be calculated without independent calibration. With appropriate instrumental configuration, the method should be adaptable for screening solutes for interaction with planar monolayers having both well-defined composition and adjustable lipid packing density.     

The amyloid precursor protein interacts with neutral lipids.

The amyloid protein precursor (APP) was incorporated into liposomes or phospholipid monolayers. APP insertion into liposomes required neutral lipids, such as L-alpha-phosphatidylcholine, in the target membrane. It was prevented in vesicles containing L-alpha-phosphatidylserine. The insertion was enhanced in acidic solutions, suggesting that it is modulated by specific charge/charge interactions. Surface-active properties and behaviour of APP were characterized during insertion of the protein in monomolecular films of L-alpha-phosphatidylcholine, L-alpha-phosphatidylethanolamine or L-alpha-phosphatidylserine. The presence of the lipid film enhanced the rate of adsorption of the protein at the interface, and the increase in surface pressure was consistent with APP penetrating the lipid film. The adsorption of APP on the lipid monolayers displayed a significant head group dependency, suggesting that the changes in surface pressure produced by the protein were probably affected by electrostatic interactions with the lipid layers. Our results indicate that the penetration of the protein into the lipid monolayer is also influenced by the hydrophobic interactions between APP and the lipid. CD spectra showed that a large proportion of the alpha-helical secondary structure of APP remained preserved over the pH or ionic strength ranges used. Our findings suggest that APP/membrane interactions are mediated by the lipid composition and depend on both electrostatic and hydrophobic effects, and that the variations observed are not due to major secondary structural changes in APP. These observations may be related to the partitioning of APP into membrane microdomains.     

Merocyanine 540 as a probe to monitor the molecular packing of phosphatidylcholine: a monolayer epifluorescence microscopy and spectroscopy study.

The characteristics of the fluorescent dye, merocyanine 540 (MC-540), incorporated in monolayers of 1,2-dipalmitoyl-phosphatidylcholine (DPPC), and 1-palmitoyl-2-oleoylphosphatidylcholine (POPC) were studied in different states of molecular packing. Conditions for phase separation in these monolayers were defined by their pressure/area (pi-A) isotherms. Within the liquid expanded (LE) and the liquid condensed (LC) coexisting phases of DPPC monolayers, low light level epifluorescence microscopy revealed 'dark' discoid domains embedded in a 'bright' matrix. Under the same conditions, and at temperatures as low as 12 degrees C, the pi-A isotherms of POPC demonstrate the existence of a single phase, and no fluorescent domains were observed. Fluorescence spectra of MC-540 labelled monolayers, recorded in different structural states, reveal three distinct emission peaks: a 572 nm peak, present for monolayer packing conditions at low surface pressures; a 585 nm peak, similar to that obtained from dye molecules in fluid phase lipid bilayers, and observed here within the respective area/molecule ranges of 54-62 A2 and 62-69 A2 for monolayers of DPPC and POPC with diminishing intensity at increasing surface pressure; and finally, a peak at 560 nm, which predominates in densely packed POPC monolayers. Our results are interpreted on the basis of dye partitioning between monolayer and subphase, and different orientations of the dye with respect to the monolayer in various structural states. The usefulness of MC-540 to differentiate lipid packing in cell membranes is discussed.     

Effect of nonbilayer lipids on membrane binding and insertion of the catalytic domain of leader peptidase

Biological membranes contain a substantial amount of "nonbilayer lipids", which have a tendency to form nonlamellar phases. In this study the hypothesis was tested that the presence of nonbilayer lipids in a membrane, due to their overall small headgroup, results in a lower packing density in the headgroup region, which might facilitate the interfacial insertion of proteins. Using the catalytic domain of leader peptidase (delta2-75) from Escherichia coli as a model protein, we studied the lipid class dependence of its insertion and binding. In both lipid monolayers and vesicles, the membrane binding of (catalytically active) delta2-75 was much higher for the nonbilayer lipid DOPE compared to the bilayer lipid DOPC. For the nonbilayer lipids DOG and MGDG a similar effect was observed as for DOPE, strongly suggesting that no specific interactions are involved but that the small headgroups create hydrophobic interfacial insertion sites. On the basis of the results of the monolayer experiments, calculations were performed to estimate the space between the lipid headgroups accessible to the protein. We estimate a maximal size of the insertion sites of 15 +/- 7 A2/lipid molecule for DOPE, relative to DOPC. The size of the insertion sites decreases with an increase in headgroup size. These results show that nonbilayer lipids stimulate the membrane insertion of delta2-75 and support the idea that such lipids create insertion sites by reducing the packing density at the membrane-water interface. It is suggested that PE in the bacterial membrane facilitates membrane insertion of the catalytic domain of leader peptidase, allowing the protein to reach the cleavage site in preproteins.