Molecular Characterization of Laccase Genes from the Basidiomycete Coprinus cinereus and Heterologous Expression of the Laccase Lcc1

A laccase from Coprinus cinereus is active at alkaline pH, an essential property for some potential applications. We cloned and sequenced three laccase genes (lcc1, lcc2, and lcc3) from the ink cap basidiomycete C. cinereus. The lcc1 gene contained 7 introns, while both lcc2 and lcc3 contained 13 introns. The predicted mature proteins (Lcc1 to Lcc3) are 58 to 80% identical at the amino acid level. The predicted Lcc1 contains a 23-amino-acid C-terminal extension rich in arginine and lysine, suggesting that C-terminal processing may occur during its biosynthesis. We expressed the Lcc1 protein in Aspergillus oryzae and purified it. The Lcc1 protein as expressed in A. oryzae has an apparent molecular mass of 66 kDa on sodium dodecyl sulfate-polyacrylamide gel electrophoresis and absorption maxima at 278 and 614 nm. Based on the N-terminal protein sequence of the laccase, a 4-residue propeptide was processed during the maturation of the enzyme. The dioxygen specificity of the laccase showed an apparent K_m of 21 ± 2 μM and a catalytic constant of 200 ± 10 min⁻¹ for O₂ with 2,2′-azinobis(3-ethylbenzothiazoline-6-sulfonic acid) as the reducing substrate at pH 5.5. Lcc1 from A. oryzae may be useful in industrial applications. This is the first report of a basidiomycete laccase whose biosynthesis involves both N-terminal and C-terminal processing.     

A Highly Efficient Recombinant Laccase from the Yeast Yarrowia lipolytica and Its Application in the Hydrolysis of Biomass

A modified thermal asymmetric interlaced polymerase chain reaction was performed to obtain the first yeast laccase gene (YlLac) from the isolated yeast Yarrowia lipolytica. The 1557-bp full-length cDNA of YlLac encoded a mature laccase protein containing 519 amino acids preceded by a signal peptide of 19 amino acids, and the YlLac gene was expressed in the yeast Pichia pastoris. YlLac is a monomeric glycoprotein with a molecular mass of ~55 kDa as determined by polyacrylamide-gel electrophoresis. It showed a higher catalytic efficiency towards 2,2-azino-bis(3-ethylbenzothiazoline-6-sulfonate) (k_cat/K_m = 17.5 s^-1 μM^-1) and 2,6-dimethoxyphenol (k_cat/K_m = 16.1 s^-1 μM^-1) than other reported laccases. The standard redox potential of the T1 site of the enzyme was found to be 772 mV. The highest catalytic efficiency of the yeast recombinant laccase, YlLac, makes it a good candidate for industrial applications: it removes phenolic compounds in acid-pretreated woody biomass (Populus balsamifera) and enhanced saccharification.     

A Chlorogenic Acid Esterase with a Unique Substrate Specificity from Ustilago maydis

An extracellular chlorogenic acid esterase from Ustilago maydis (UmChlE) was purified to homogeneity by using three separation steps, including anion-exchange chromatography on a Q Sepharose FF column, preparative isoelectric focusing (IEF), and, finally, a combination of affinity chromatography and hydrophobic interaction chromatography on polyamide. SDS-PAGE analysis suggested a monomeric protein of ∼71 kDa. The purified enzyme showed maximal activity at pH 7.5 and at 37°C and was active over a wide pH range (3.5 to 9.5). Previously described chlorogenic acid esterases exhibited a comparable affinity for chlorogenic acid, but the enzyme from Ustilago was also active on typical feruloyl esterase substrates. Kinetic constants for chlorogenic acid, methyl p-coumarate, methyl caffeate, and methyl ferulate were as follows: K_m values of 19.6 μM, 64.1 μM, 72.5 μM, and 101.8 μM, respectively, and k_cat/K_m values of 25.83 mM⁻¹ s⁻¹, 7.63 mM⁻¹ s⁻¹, 3.83 mM⁻¹ s⁻¹ and 3.75 mM⁻¹ s⁻¹, respectively. UmChlE released ferulic, p-coumaric, and caffeic acids from natural substrates such as destarched wheat bran (DSWB) and coffee pulp (CP), confirming activity on complex plant biomass. The full-length gene encoding UmChlE consisted of 1,758 bp, corresponding to a protein of 585 amino acids, and was functionally produced in Pichia pastoris GS115. Sequence alignments with annotated chlorogenic acid and feruloyl esterases underlined the uniqueness of this enzyme.     

A Novel Lentinula edodes Laccase and Its Comparative Enzymology Suggest Guaiacol-Based Laccase Engineering for Bioremediation

Laccases are versatile biocatalysts for the bioremediation of various xenobiotics, including dyes and polyaromatic hydrocarbons. However, current sources of new enzymes, simple heterologous expression hosts and enzymatic information (such as the appropriateness of common screening substrates on laccase engineering) remain scarce to support efficient engineering of laccase for better “green” applications. To address the issue, this study began with cloning the laccase family of Lentinula edodes. Three laccases perfectio sensu stricto (Lcc4A, Lcc5, and Lcc7) were then expressed from Pichia pastoris, characterized and compared with the previously reported Lcc1A and Lcc1B in terms of kinetics, stability, and degradation of dyes and polyaromatic hydrocarbons. Lcc7 represented a novel laccase, and it exhibited both the highest catalytic efficiency (assayed with 2,2′-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) [ABTS]) and thermostability. However, its performance on “green” applications surprisingly did not match the activity on the common screening substrates, namely, ABTS and 2,6-dimethoxyphenol. On the other hand, correlation analyses revealed that guaiacol is much better associated with the decolorization of multiple structurally different dyes than are the two common screening substrates. Comparison of the oxidation chemistry of guaiacol and phenolic dyes, such as azo dyes, further showed that they both involve generation of phenoxyl radicals in laccase-catalyzed oxidation. In summary, this study concluded a robust expression platform of L. edodes laccases, novel laccases, and an indicative screening substrate, guaiacol, which are all essential fundamentals for appropriately driving the engineering of laccases towards more efficient “green” applications.     

In glucose-limited continuous culture the minimum substrate concentration for growth,smin, is crucial in the competition between the enterobacterium Escherichia coli and Chelatobacter heintzii,an environmentally abundant bacterium

The competition for glucose between Escherichia coli ML30, a typical copiotrophic enterobacterium and Chelatobacter heintzii ATCC29600, an environmentally successful strain, was studied in a carbon-limited culture at low dilution rates. First, as a base for modelling, the kinetic parameters μ_max and K_s were determined for growth with glucose. For both strains, μ_max was determined in batch culture after different precultivation conditions. In the case of C. heintzii, μ_max was virtually independent of precultivation conditions. When inoculated into a glucose-excess batch culture medium from a glucose-limited chemostat run at a dilution rate of 0.075 h⁻¹ C. heintzii grew immediately with a μ_max of 0.17±0.03 h⁻¹. After five transfers in batch culture, μ_max had increased only slightly to 0.18±0.03 h⁻¹. A different pattern was observed in the case of E. coli. Inoculated from a glucose-limited chemostat at D=0.075 h⁻¹ into glucose-excess batch medium E. coli grew only after an acceleration phase of ∼3.5 h with a μ_max of 0.52 h⁻¹. After 120 generations and several transfers into fresh medium, μ_max had increased to 0.80±0.03 h⁻¹. For long-term adapted chemostat-cultivated cells, a K_s for glucose of 15 μg l⁻¹ for C. heintzii, and of 35 μg l⁻¹ for E. coli, respectively, was determined in ¹⁴C-labelled glucose uptake experiments. In competition experiments, the population dynamics of the mixed culture was determined using specific surface antibodies against C. heintzii and a specific 16S rRNA probe for E. coli. C. heintzii outcompeted E. coli in glucose-limited continuous culture at the low dilution rates of 0.05 and 0.075 h⁻¹. Using the determined pure culture parameter values for K_s and μ_max, it was only possible to simulate the population dynamics during competition with an extended form of the Monod model, which includes a finite substrate concentration at zero growth rate (s_min). The values estimated for s_min were dependent on growth rate; at D=0.05 h⁻¹, it was 12.6 and 0 μg l⁻¹ for E. coli and C. heintzii, respectively. To fit the data at D=0.075 h⁻¹, s_min for E. coli had to be raised to 34.9 μg l⁻¹ whereas s_min for C. heintzii remained zero. The results of the mathematical simulation suggest that it is not so much the higher K_s value, which is responsible for the unsuccessful competition of E. coli at low residual glucose concentration, but rather the existence of a significant s_min.     

Kinesin-2 KIF3AB Exhibits Novel ATPase Characteristics

KIF3AB is an N-terminal processive kinesin-2 family member best known for its role in intraflagellar transport. There has been significant interest in KIF3AB in defining the key principles that underlie the processivity of KIF3AB in comparison with homodimeric processive kinesins. To define the ATPase mechanism and coordination of KIF3A and KIF3B stepping, a presteady-state kinetic analysis was pursued. For these studies, a truncated murine KIF3AB was generated. The results presented show that microtubule association was fast at 5.7 μm⁻¹ s⁻¹, followed by rate-limiting ADP release at 12.8 s⁻¹. ATP binding at 7.5 μm⁻¹ s⁻¹ was followed by an ATP-promoted isomerization at 84 s⁻¹ to form the intermediate poised for ATP hydrolysis, which then occurred at 33 s⁻¹. ATP hydrolysis was required for dissociation of the microtubule·KIF3AB complex, which was observed at 22 s⁻¹. The dissociation step showed an apparent affinity for ATP that was very weak (K_½,ATP at 133 μm). Moreover, the linear fit of the initial ATP concentration dependence of the dissociation kinetics revealed an apparent second-order rate constant at 0.09 μm⁻¹ s⁻¹, which is inconsistent with fast ATP binding at 7.5 μm⁻¹ s⁻¹ and a K_d,ATP at 6.1 μm. These results suggest that ATP binding per se cannot account for the apparent weak K_½,ATP at 133 μm. The steady-state ATPase K_m,ATP, as well as the dissociation kinetics, reveal an unusual property of KIF3AB that is not yet well understood and also suggests that the mechanochemistry of KIF3AB is tuned somewhat differently from homodimeric processive kinesins.     

Alginate Lyases from Alginate-Degrading Vibrio splendidus 12B01 Are Endolytic

Alginate lyases are enzymes that degrade alginate through β-elimination of the glycosidic bond into smaller oligomers. We investigated the alginate lyases from Vibrio splendidus 12B01, a marine bacterioplankton species that can grow on alginate as its sole carbon source. We identified, purified, and characterized four polysaccharide lyase family 7 alginates lyases, AlyA, AlyB, AlyD, and AlyE, from V. splendidus 12B01. The four lyases were found to have optimal activity between pH 7.5 and 8.5 and at 20 to 25°C, consistent with their use in a marine environment. AlyA, AlyB, AlyD, and AlyE were found to exhibit a turnover number (k_cat) for alginate of 0.60 ± 0.02 s⁻¹, 3.7 ± 0.3 s⁻¹, 4.5 ± 0.5 s⁻¹, and 7.1 ± 0.2 s⁻¹, respectively. The K_m values of AlyA, AlyB, AlyD, and AlyE toward alginate were 36 ± 7 μM, 22 ± 5 μM, 60 ± 2 μM, and 123 ± 6 μM, respectively. AlyA and AlyB were found principally to cleave the β-1,4 bonds between β-d-mannuronate and α-l-guluronate and subunits; AlyD and AlyE were found to principally cleave the α-1,4 bonds involving α-l-guluronate subunits. The four alginate lyases degrade alginate into longer chains of oligomers.     

Kinetics of Denitrifying Growth by Fast-Growing Cowpea Rhizobia

Two fast-growing strains of cowpea rhizobia (A26 and A28) were found to grow anaerobically at the expense of NO₃⁻, NO₂⁻, and N₂O as terminal electron acceptors. The two major differences between aerobic and denitrifying growth were lower yield coefficients (Y) and higher saturation constants (K_s) with nitrogenous oxides as electron acceptors. When grown aerobically, A26 and A28 adhered to Monod kinetics, respectively, as follows: K_s, 3.4 and 3.8 μM; Y, 16.0 and 14.0 g · cells eq⁻¹; μ_max, 0.41 and 0.33 h⁻¹. Yield coefficients for denitrifying growth ranged from 40 to 70% of those for aerobic growth. Only A26 adhered to Monod kinetics with respect to growth on all three nitrogenous oxides. The apparent K_s values were 41, 270, and 460 μM for nitrous oxide, nitrate, and nitrite, respectively; the K_s for A28 grown on nitrate was 250 μM. The results are kinetically and thermodynamically consistent in explaining why O₂ is the preferred electron acceptor. Although no definitive conclusions could be drawn regarding preferential utilization of nitrogenous oxides, nitrite was inhibitory to both strains and effected slower growth. However, growth rates were identical (μ_max, 0.41 h⁻¹) when A26 was grown with either O₂ or NO₃⁻ as an electron acceptor and were only slightly reduced when A28 was grown with NO₃⁻ (0.25 h⁻¹) as opposed to O₂ (0.33 h⁻¹).     

Controls of Evapotranspiration and CO2 Fluxes from Scots Pine by Surface Conductance and Abiotic Factors

Evapotranspiration (E) and CO₂ flux (F_c) in the growing season of an unusual dry year were measured continuously over a Scots pine forest in eastern Finland, by eddy covariance techniques. The aims were to gain an understanding of their biological and environmental control processes. As a result, there were obvious diurnal and seasonal changes in E, F_c, surface conductance (g_c), and decoupling coefficient (Ω), showing similar trends to those in radiation (PAR) and vapour pressure deficit (δ). The maximum mean daily values (24-h average) for E, F_c, g_c, and Ω were 1.78 mmol m⁻² s⁻¹, −11.18 µmol m⁻² s⁻¹, 6.27 mm s⁻¹, and 0.31, respectively, with seasonal averages of 0.71 mmol m⁻² s⁻¹, −4.61 µmol m⁻² s⁻¹, 3.3 mm s⁻¹, and 0.16. E and F_c were controlled by combined biological and environmental variables. There was curvilinear dependence of E on g_c and F_c on g_c. Among the environmental variables, PAR was the most important factor having a positive linear relationship to E and curvilinear relationship to F_c, while vapour pressure deficit was the most important environmental factor affecting g_c. Water use efficiency was slightly higher in the dry season, with mean monthly values ranging from 6.67 to 7.48 μmol CO₂ (mmol H₂O)⁻¹ and a seasonal average of 7.06 μmol CO₂ (μmol H₂O)⁻¹. Low Ω and its close positive relationship with g_c indicate that evapotranspiration was sensitive to surface conductance. Mid summer drought reduced surface conductance and decoupling coefficient, suggesting a more biotic control of evapotranspiration and a physiological acclimation to dry air. Surface conductance remained low and constant under dry condition, supporting that a constant value of surface constant can be used for modelling transpiration under drought condition.     

Biodegradation of Chloromethane by Pseudomonas aeruginosa Strain NB1 under Nitrate-Reducing and Aerobic Conditions

Pseudomonas aeruginosa strain NB1 uses chloromethane (CM) as its sole source of carbon and energy under nitrate-reducing and aerobic conditions. The observed yield of NB1 was 0.20 (±0.06) (mean ± standard deviation) and 0.28 (±0.01) mg of total suspended solids (TSS) mg of CM⁻¹ under anoxic and aerobic conditions, respectively. The stoichiometry of nitrate consumption was 0.75 (±0.10) electron equivalents (eeq) of NO₃⁻ per eeq of CM, which is consistent with the yield when it is expressed on an eeq basis. Nitrate was stoichiometrically converted to dinitrogen (0.51 ± 0.05 mol of N₂ per mol of NO₃⁻). The stoichiometry of oxygen use with CM (0.85 ± 0.21 eeq of O₂ per eeq of CM) was also consistent with the aerobic yield. Stoichiometric release of chloride and minimal accumulation of soluble metabolic products (measured as chemical oxygen demand) following CM consumption, under anoxic and aerobic conditions, indicated complete biodegradation of CM. Acetylene did not inhibit CM use under aerobic conditions, implying that a monooxygenase was not involved in initiating aerobic CM metabolism. Under anoxic conditions, the maximum specific CM utilization rate (k) for NB1 was 5.01 (±0.06) μmol of CM mg of TSS⁻¹ day⁻¹, the maximum specific growth rate (μ_max) was 0.0506 day⁻¹, and the Monod half-saturation coefficient (K_s) was 0.067 (±0.004) μM. Under aerobic conditions, the values for k, μ_max, and K_s were 10.7 (±0.11) μmol of CM mg of TSS⁻¹ day⁻¹, 0.145 day⁻¹, and 0.93 (±0.042) μM, respectively, indicating that NB1 used CM faster under aerobic conditions. Strain NB1 also grew on methanol, ethanol, and acetate under denitrifying and aerobic conditions, but not on methane, formate, or dichloromethane.     

Photosynthetic Light Responses May Explain Vertical Distribution of Hymenophyllaceae Species in a Temperate Rainforest of Southern Chile

Some epiphytic Hymenophyllaceae are restricted to lower parts of the host (<60 cm; 10–100 μmol photons m^-2 s^-1) in a secondary forest of Southern Chile; other species occupy the whole host height (≥10 m; max PPFD >1000 μmol photons m^-2 s^-1). Our aim was to study the photosynthetic light responses of two Hymenophyllaceae species in relation to their contrasting distribution. We determined light tolerance of Hymenoglossum cruentum and Hymenophyllum dentatum by measuring gas exchange, PSI and PSII light energy partitioning, NPQ components, and pigment contents. H. dentatum showed lower maximum photosynthesis rates (A_max) than H. cruentum, but the former species kept its net rates (A_n) near A_max across a wide light range. In contrast, in the latter one, A_n declined at PPFDs >60 μmol photons m^-2 s^-1. H. cruentum, the shadiest plant, showed higher chlorophyll contents than H. dentatum. Differences in energy partitioning at PSI and PSII were consistent with gas exchange results. H. dentatum exhibited a higher light compensation point of the partitioning of absorbed energy between photochemical Y(PSII) and non-photochemical Y(NPQ) processes. Hence, both species allocated energy mainly toward photochemistry instead of heat dissipation at their light saturation points. Above saturation, H. cruentum had higher heat dissipation than H. dentatum. PSI yield (YPSI) remained higher in H. dentatum than H. cruentum in a wider light range. In both species, the main cause of heat dissipation at PSI was a donor side limitation. An early dynamic photo-inhibition of PSII may have caused an over reduction of the Qa⁺ pool decreasing the efficiency of electron donation to PSI. In H. dentatum, a slight increase in heat dissipation due to acceptor side limitation of PSI was observed above 300 μmol photons m^-2s^-1. Differences in photosynthetic responses to light suggest that light tolerance and species plasticity could explain their contrasting vertical distribution.     

Clotrimazole as a Potent Agent for Treating the Oomycete Fish Pathogen Saprolegnia parasitica through Inhibition of Sterol 14α-Demethylase (CYP51)

A candidate CYP51 gene encoding sterol 14α-demethylase from the fish oomycete pathogen Saprolegnia parasitica (SpCYP51) was identified based on conserved CYP51 residues among CYPs in the genome. It was heterologously expressed in Escherichia coli, purified, and characterized. Lanosterol, eburicol, and obtusifoliol bound to purified SpCYP51 with similar binding affinities (K_s, 3 to 5 μM). Eight pharmaceutical and six agricultural azole antifungal agents bound tightly to SpCYP51, with posaconazole displaying the highest apparent affinity (K_d, ≤3 nM) and prothioconazole-desthio the lowest (K_d, ∼51 nM). The efficaciousness of azole antifungals as SpCYP51 inhibitors was confirmed by 50% inhibitory concentrations (IC₅₀s) of 0.17 to 2.27 μM using CYP51 reconstitution assays. However, most azole antifungal agents were less effective at inhibiting S. parasitica, Saprolegnia diclina, and Saprolegnia ferax growth. Epoxiconazole, fluconazole, itraconazole, and posaconazole failed to inhibit Saprolegnia growth (MIC₁₀₀, >256 μg ml⁻¹). The remaining azoles inhibited Saprolegnia growth only at elevated concentrations (MIC₁₀₀ [the lowest antifungal concentration at which growth remained completely inhibited after 72 h at 20°C], 16 to 64 μg ml⁻¹) with the exception of clotrimazole, which was as potent as malachite green (MIC₁₀₀, ∼1 μg ml⁻¹). Sterol profiles of azole-treated Saprolegnia species confirmed that endogenous CYP51 enzymes were being inhibited with the accumulation of lanosterol in the sterol fraction. The effectiveness of clotrimazole against SpCYP51 activity (IC₅₀, ∼1 μM) and the concentration inhibiting the growth of Saprolegnia species in vitro (MIC₁₀₀, ∼1 to 2 μg ml⁻¹) suggest that clotrimazole could be used against Saprolegnia infections, including as a preventative measure by pretreatment of fish eggs, and for freshwater-farmed fish as well as in leisure activities.     

Successional Development of Sulfate-Reducing Bacterial Populations and Their Activities in a Wastewater Biofilm Growing under Microaerophilic Conditions

A combination of fluorescence in situ hybridization, microprofiles, denaturing gradient gel electrophoresis of PCR-amplified 16S ribosomal DNA fragments, and 16S rRNA gene cloning analysis was applied to investigate successional development of sulfate-reducing bacteria (SRB) community structure and in situ sulfide production activity within a biofilm growing under microaerophilic conditions (dissolved oxygen concentration in the bulk liquid was in the range of 0 to 100 μM) and in the presence of nitrate. Microelectrode measurements showed that oxygen penetrated 200 μm from the surface during all stages of biofilm development. The first sulfide production of 0.32 μmol of H₂S m⁻² s⁻¹ was detected below ca. 500 μm in the 3rd week and then gradually increased to 0.70 μmol H₂S m⁻² s⁻¹ in the 8th week. The most active sulfide production zone moved upward to the oxic-anoxic interface and intensified with time. This result coincided with an increase in SRB populations in the surface layer of the biofilm. The numbers of the probe SRB385- and 660-hybridized SRB populations significantly increased to 7.9 × 10⁹ cells cm⁻³ and 3.6 × 10⁹ cells cm⁻³, respectively, in the surface 400 μm during an 8-week cultivation, while those populations were relatively unchanged in the deeper part of the biofilm, probably due to substrate transport limitation. Based on 16S rRNA gene cloning analysis data, clone sequences that related to Desulfomicrobium hypogeium (99% sequence similarity) and Desulfobulbus elongatus (95% sequence similarity) were most frequently found. Different molecular analyses confirmed that Desulfobulbus, Desulfovibrio, and Desulfomicrobium were found to be the numerically important members of SRB in this wastewater biofilm.     

Growth and Nitrogen Uptake Kinetics in Cultured Prorocentrum donghaiense

We compared growth kinetics of Prorocentrum donghaiense cultures on different nitrogen (N) compounds including nitrate (NO₃ ⁻), ammonium (NH₄ ⁺), urea, glutamic acid (glu), dialanine (diala) and cyanate. P. donghaiense exhibited standard Monod-type growth kinetics over a range of N concentraions (0.5–500 μmol N L⁻¹ for NO₃ ⁻ and NH₄ ⁺, 0.5–50 μmol N L⁻¹ for urea, 0.5–100 μmol N L⁻¹ for glu and cyanate, and 0.5–200 μmol N L⁻¹ for diala) for all of the N compounds tested. Cultures grown on glu and urea had the highest maximum growth rates (μ_m, 1.51±0.06 d⁻¹ and 1.50±0.05 d⁻¹, respectively). However, cultures grown on cyanate, NO₃ ⁻, and NH₄ ⁺ had lower half saturation constants (K_μ, 0.28–0.51 μmol N L⁻¹). N uptake kinetics were measured in NO₃ ⁻-deplete and -replete batch cultures of P. donghaiense. In NO₃ ⁻-deplete batch cultures, P. donghaiense exhibited Michaelis-Menten type uptake kinetics for NO₃ ⁻, NH₄ ⁺, urea and algal amino acids; uptake was saturated at or below 50 μmol N L⁻¹. In NO₃ ⁻-replete batch cultures, NH₄ ⁺, urea, and algal amino acid uptake kinetics were similar to those measured in NO₃ ⁻-deplete batch cultures. Together, our results demonstrate that P. donghaiense can grow well on a variety of N sources, and exhibits similar uptake kinetics under both nutrient replete and deplete conditions. This may be an important factor facilitating their growth during bloom initiation and development in N-enriched estuaries where many algae compete for bioavailable N and the nutrient environment changes as a result of algal growth.     

Osmotic water permeability of isolated protoplasts. Modifications during development

A transference chamber was developed to measure the osmotic water permeability coefficient (P_os) in protoplasts 40 to 120 μm in diameter. The protoplast was held by a micropipette and submitted to a steep osmotic gradient created in the transference chamber. P_os was derived from the changes in protoplast dimensions, as measured using a light microscope. Permeabilities were in the range 1 to 1000 μm s⁻¹ for the various types of protoplasts tested. The precision for P_os was ≤40%, and within this limit, no asymmetry in the water fluxes was observed. Measurements on protoplasts isolated from 2- to 5-d-old roots revealed a dramatic increase in P_os during root development. A shift in P_os from 10 to 500 μm s⁻¹ occurred within less than 48 h. This phenomenon was found in maize (Zea mays), wheat (Triticum aestivum), and rape (Brassica napus) roots. These results show that early developmental processes modify water-transport properties of the plasma membrane, and that the transference chamber is adapted to the study of water-transport mechanisms in native membranes.     

Interaction of α-Lipoic Acid with the Human Na+/Multivitamin Transporter (hSMVT)

The human Na⁺/multivitamin transporter (hSMVT) has been suggested to transport α-lipoic acid (LA), a potent antioxidant and anti-inflammatory agent used in therapeutic applications, e.g. in the treatment of diabetic neuropathy and Alzheimer disease. However, the molecular basis of the cellular delivery of LA and in particular the stereospecificity of the transport process are not well understood. Here, we expressed recombinant hSMVT in Pichia pastoris and used affinity chromatography to purify the detergent-solubilized protein followed by reconstitution of hSMVT in lipid bilayers. Using a combined approach encompassing radiolabeled LA transport and equilibrium binding studies in conjunction with the stabilized R-(+)- and S-(−)-enantiomers and the R,S-(+/−) racemic mixture of LA or lipoamide, we identified the biologically active form of LA, R-LA, to be the physiological substrate of hSMVT. Interaction of R-LA with hSMVT is strictly dependent on Na⁺. Under equilibrium conditions, hSMVT can simultaneously bind ∼2 molecules of R-LA in a biphasic binding isotherm with dissociation constants (K_d) of 0.9 and 7.4 μm. Transport of R-LA in the oocyte and reconstituted system is exclusively dependent on Na⁺ and exhibits an affinity of ∼3 μm. Measuring transport with known amounts of protein in proteoliposomes containing hSMVT in outside-out orientation yielded a catalytic turnover number (k_cat) of about 1 s⁻¹, a value that is well in agreement with other Na⁺-coupled transporters. Our data suggest that hSMVT-mediated transport is highly specific for R-LA at our tested concentration range, a finding with wide ramifications for the use of LA in therapeutic applications.     

Comparative characterization of four laccases from Trametes versicolor concerning phenolic C-C coupling and oxidation of PAHs

The laccase genes lccα, lccβ, lccγ and lccδ encoding four isoenzymes from Trametes versicolor have been cloned and expressed in Pichia pastoris. Biochemical characterization allowed classification of these laccases into two distinct groups: Lccα and Lccβ possessed higher thermal stability, but lower catalytic activity towards 2,2′-azino-bis(3-ethylbenzothiazoline-6-sulphonic acid) (ABTS) compared to Lccγ and Lccδ. Activities of the laccases were quite different as well. Laccase Lccδ showed highest phenolic C-C coupling activity with sinapic acid, but lowest oxidizing activity towards polycyclic aromatic hydrocarbons (PAHs). Highest activity towards PAHs was observed with Lccβ. After 72 h, more than 80% of fluorene, anthracene, acenaphthene and acenaphthylene were oxidized by Lccβ in the presence of ABTS. Investigation of the structural basis of the different activities of the laccases demonstrated the impact of positions 164 and 265 in the substrate binding site on oxidation of PAHs.     

Distribution of Sulfate-Reducing and Methanogenic Bacteria in Anaerobic Aggregates Determined by Microsensor and Molecular Analyses

Using molecular techniques and microsensors for H₂S and CH₄, we studied the population structure of and the activity distribution in anaerobic aggregates. The aggregates originated from three different types of reactors: a methanogenic reactor, a methanogenic-sulfidogenic reactor, and a sulfidogenic reactor. Microsensor measurements in methanogenic-sulfidogenic aggregates revealed that the activity of sulfate-reducing bacteria (2 to 3 mmol of S²⁻ m⁻³ s⁻¹ or 2 × 10⁻⁹ mmol s⁻¹ per aggregate) was located in a surface layer of 50 to 100 μm thick. The sulfidogenic aggregates contained a wider sulfate-reducing zone (the first 200 to 300 μm from the aggregate surface) with a higher activity (1 to 6 mmol of S²⁻ m⁻³ s⁻¹ or 7 × 10⁻⁹ mol s⁻¹ per aggregate). The methanogenic aggregates did not show significant sulfate-reducing activity. Methanogenic activity in the methanogenic-sulfidogenic aggregates (1 to 2 mmol of CH₄ m⁻³ s⁻¹ or 10⁻⁹ mmol s⁻¹ per aggregate) and the methanogenic aggregates (2 to 4 mmol of CH₄ m⁻³ s⁻¹ or 5 × 10⁻⁹ mmol s⁻¹ per aggregate) was located more inward, starting at ca. 100 μm from the aggregate surface. The methanogenic activity was not affected by 10 mM sulfate during a 1-day incubation. The sulfidogenic and methanogenic activities were independent of the type of electron donor (acetate, propionate, ethanol, or H₂), but the substrates were metabolized in different zones. The localization of the populations corresponded to the microsensor data. A distinct layered structure was found in the methanogenic-sulfidogenic aggregates, with sulfate-reducing bacteria in the outer 50 to 100 μm, methanogens in the inner part, and Eubacteria spp. (partly syntrophic bacteria) filling the gap between sulfate-reducing and methanogenic bacteria. In methanogenic aggregates, few sulfate-reducing bacteria were detected, while methanogens were found in the core. In the sulfidogenic aggregates, sulfate-reducing bacteria were present in the outer 300 μm, and methanogens were distributed over the inner part in clusters with syntrophic bacteria.     

Human DNA Polymerase ν Catalyzes Correct and Incorrect DNA Synthesis with High Catalytic Efficiency

DNA polymerase ν (pol ν) is a low fidelity A-family polymerase with a putative role in interstrand cross-link repair and homologous recombination. We carried out pre-steady-state kinetic analysis to elucidate the kinetic mechanism of this enzyme. We found that the mechanism consists of seven steps, similar that of other A-family polymerases. pol ν binds to DNA with a K_d for DNA of 9.2 nm, with an off-rate constant of 0.013 s⁻¹and an on-rate constant of 14 μm⁻¹ s⁻¹. dNTP binding is rapid with K_d values of 20 and 476 μm for the correct and incorrect dNTP, respectively. Pyrophosphorylation occurs with a K_d value for PP_i of 3.7 mm and a maximal rate constant of 11 s⁻¹. Pre-steady-state kinetics, examination of the elemental effect using dNTPαS, and pulse-chase experiments indicate that a rapid phosphodiester bond formation step is flanked by slow conformational changes for both correct and incorrect base pair formation. These experiments in combination with computer simulations indicate that the first conformational change occurs with rate constants of 75 and 20 s⁻¹; rapid phosphodiester bond formation occurs with a K_eq of 2.2 and 1.7, and the second conformational change occurs with rate constants of 2.1 and 0.5 s⁻¹, for correct and incorrect base pair formation, respectively. The presence of a mispair does not induce the polymerase to adopt a low catalytic conformation. pol ν catalyzes both correct and mispair formation with high catalytic efficiency.