Plasmid stability in Bacillus sphaericus 2362 during recycling in mosquito larvae.

Bacillus sphaericus 2362 strains transformed with the plasmid pUB110 (4.5 kb) and plasmids derived from it, pLDT103 (7.6 kb) and pLDT117 (9.3 kb), were able to recycle (spore germination, vegetative growth, sporulation) in larvae of Culex quinquefasciatus. During the course of recycling, the pUB110 vector and the recombinant plasmid pLDT103 were stable (100 and 99.2%, respectively). However, the recombinant plasmid pLDT117 exhibited 23% segregational instability. Isolates which lost pLDT117 during recycling retained the one large plasmid native to B. sphaericus 2362.     

Instability of recombinant pUB110 plasmids in Bacillus subtilis: Plasmid-encoded stability function and effects of DNA inserts

Two series of pUB110-derived plasmids were constructed to study segregational stability in Bacillus subtilis. pEB plasmids were based on the entire pUB110, whereas pLB plasmids lack the membrane-binding areas BA3 and BA4. Two kinds of stability defects were observed. The first was characterized by a strong size dependency and occurred with different inserts at various positions in pLB and pEB plasmids. Size-dependent reductions in plasmid copy numbers appeared to underly this phenomenon. This may render pUB110 unsuitable for the cloning of inserts larger than about 3 kb, in particular if no selective conditions can be applied. The second defect, observed with pLB plasmids, was caused by the absence of the membrane-binding areas BA3 and BA4. Deletion of BA3 resulted in the accumulation of single-stranded plasmid DNA, suggesting that BA3 contains the initiation signal for complementary strand synthesis. The BA3 region is very rich in hyphenated dyad symmetry which, in single-stranded DNA, could result in several stable alternative secondary structures. It is speculated that the activity of the BA3-associated initiation signal contributes to the segregational stability of pUB110-derived plasmids in B. subtilis. The absence of the BA3 stability function could not account for all stability defects observed. Additional stability functions seemed to be located on the BA4 fragment.     

Segregational instability of pUB110-derived recombinant plasmids in Bacillus subtilis

To study plasmid instability in Bacillus subtilis the pUB110-derived hybrid plasmid pLB2 (3.6 kb) and the bifunctional replicon pLB5 (5.9 kb), able to replicate in B. subtilis and Escherichia coli, were constructed. In both vectors homologous B. subtilis, or heterologous E. coli DNA fragments of various lengths were inserted. Irrespective of the source of the cloned DNA, the segregational stability of the recombinant plasmids in B. subtilis was severely affected by the DNA inserts. In contrast, no instability was observed in E. coli. In B. subtilis a steep inverse relationship existed between the size of the inserts and the level of stability. Increased size of the pLB plasmids resulted in strongly reduced copy numbers. This seems to be the primary cause of the size-dependent segregational instability.     

Genetic relationship between pUB110 and antibiotic-resistant plasmids obtained from thermophilic bacilli

The molecular relationship between pUB110 (Kmr, 4.4 kilobases (kb] and antibiotic-resistant plasmids from thermophilic bacilli, pTHT15 (Tcr, 4.5 kb) and pTHN1 (Kmr, 4.8 kb), were studied by blot hybridization. Extensive homology was observed between pUB110 and pTHT15 at the region which includes the replication origin. Incompatibility studies revealed that pTHT15 and pUB110 were slightly incompatible in Bacillus subtilis but that they were apparently compatible in B. stearothermophilus. This difference in incompatibility between pTHT15 and pUB110 in the two host cells might be due to a difference in the copy number of pTHT15 in the two organisms. From the results of blot hybridization, mode of kanamycin inactivation, and DNA sequencing, it was determined that pTHN1 encoded the identical gene for kanamycin nucleotidyl transferase as that of pUB110. All three plasmids pTHT15, pTHN1, and pUB110 shared a common DNA homology at the in vitro membrane-binding region.     

Similarity of minus origins of replication and flanking open reading frames of plasmids pUB110, pTB913 and pMV158.

Plasmids pMV158 and pTB913, originating from Streptococcus agalactiae and a thermophilic Bacillus respectively, were sequenced to completion. Both contained a BA3-type minus origin of replication and an RSA-site, believed to constitute a site-specific recombination site. These two regions were more than 99% homologous to the corresponding regions of the Staphylococcus aureus plasmid pUB110. Deleting the BA3-type minus origin resulted in the accumulation of a considerable amount of single-stranded DNA, both in L. lactis subsp. lactis and B. subtilis, indicating that this minus origin was functional in both bacterial species. Like pUB110, both plasmids contained an open reading frame encoding a putative plasmid recombination enzyme (Pre protein), which was located downstream of the RSA-site. On the basis of sequence comparisons between pUB110, pMV158, pTB913, pT181, pE194, pNE131 and pT48 two distinct families of RSA-sites and Pre proteins could be distinguished.     

Hybrid vectors for the cyanobacterium Anacystis nidulans R2, containing the plasmid pUB110 from Staphylococcus aureus

The recombinant vector plasmids were constructed having the DNA of pUB110 plasmid (4,5 kb, KmR) from Staphylococcus aureus inserted into the cryptic plasmids pANS (8 Kb) and pANL (48,5 kb) of cyanobacterium Anacystis nidulans R2. The hybrid plasmids transform cyanobacterial cells to Km-resistance with high efficiency. The plasmid pBS20, containing the complete sequence of pANS and pUB110 DNA, transforms Bacillus subtilis rec E4 protoplasts being, however, unstable in bacilli cells and disintegrates deriving a parent pUB110 plasmid.     

Transformation of Heat-Treated Clostridium acetobutylicum Protoplasts with pUB110 Plasmid DNA

Heat treatment of Clostridium acetobutylicum SA-1 protoplasts at 55°C for 15 min before transformation resulted in expression in this microorganism of the kanamycin resistance determinant associated with plasmid pUB110. No heat treatment, or heat treatment at 65 or 44°C for various time intervals, resulted in no kanamycin resistance transformants being recovered on selective kanamycin-containing regeneration medium. DNase plate assay indicated that treatment at 55°C for 15 min completely inactivated the DNase activity associated with SA-1 protoplasts. Treatment of protoplasts at 65 or 55°C for various periods under simulated transformation conditions had an inhibitory effect, although prolonged treatment at 55 or 44°C appeared to stimulate DNase activity. Inactivation of protoplast-associated DNase activity by heat treatment at 55°C for 15 min correlated with successful expression of kanamycin resistance and suggests that an extremely active, heatsensitive, protoplast-associated DNase may be a factor in the polyethylene glycol-induced transformation of C. acetobutylicum SA-1 protoplasts. Plasmid pUB110 DNA was isolated from C. acetobutylicum SA-1 kanamycin-resistant (Km^r) transformant cultures by a modification of the procedure used for C. perfringens plasmids. Detection of pUB110 DNA was possible only when diethyl pyrocarbonate was incorporated into isolation protocols to inactivate DNase activity. Restriction studies further verified the presence of pUB110 DNA in C. acetobutylicum SA-1 Km^r transformants.     

Complete nucleotide sequences of Bacillus plasmids pUB110dB, pRBH1 and its copy mutants

Summary The deletion plasmids, pRBH1 (1.5 MDa, kanamycin resistance, Km^r) and pUB110dB (1.5 MDa, Km^r), were obtained from pTB913 (2.9 MDa, Km^r, isolated from a thermophilic bacillus) and pUB110 (3.0 MDa, Km^r, from Staphylococcus aureus), respectively. All the nucleotide sequences of these deletion plasmids were determined. Replication origin regions of pRBH1 and pUB110dB contained, respectively, 63 base-pair inverted repeat and a large open reading frame, encoding RepB protein (235 amino acid residues). The nucleotide sequences were identical to each other except for one base in the center of the inverted repeat. Two copy number mutant plasmids, pRBHC3 and pRBHC7, were obtained from pRBH1. The mutation points were located at different positions in the RepB protein coding region (Gly to Asp for pRBHC3 and Gly to Glu for pRBHC7). RepB protein was shown to be involved in the copy number control of these plasmids.     

Identification of a low-copy-number mutation within the pUB110 replicon and its effect on plasmid stability in Bacillus subtilis

A mutation (cop1) within the minimal replicon of plasmid pUB110, reducing its copy number from 48 +/- 2 to 11 +/- 2 in a Bacillus subtilis host, was isolated. This mutation is a G----T transversion within the translation control region of the replication initiation gene (repU). The cop1 mutation, when present in the recombinant plasmid, increases both its structural and segregational stability.     

Analysis of the Requirement for a pUB110 mob Region during Tn916-Dependent Mobilization

Tn916-dependent mobilization of nonconjugative plasmids pUB110 and its derivative pUB110Deltam was compared. Deleting a 787-bp fragment from the pUB110 mob region created plasmid pUB110Deltam. Deletion of the mob region of pUB110 rendered the plasmid nontransferable by the conjugative plasmids of Bacillus thuringiensis subsp. israelensis. During matings between Bacillus subtilis (Tn916) and B. thuringiensis subsp. israelensis, however, Tn916-dependent mobilization of plasmids pUB110 and pUB110Deltam was observed at a frequency of approximately 2 x 10(-6) transconjugants per donor. The results show that Tn916-mediated conjugal transfer of plasmids is a mob-independent event. Jaworski and Clewell (J. Bacteriol 177; 6644-6651) recently demonstrated the presence of an IncP-like nicking site in the oriT of Tn916. These data suggest that a IncP-like nickling site is essential for Tn916-mediated plasmid transfer.     

Origin and mode of replication of plasmids pE194 and pUB110

Replication of the multicopy antibiotic resistance plasmids pE194 and pUB110 has been studied in Bacillus subtilis. Based on electron microscopic analysis of replication intermediates and on evidence from deletants, we have determined that both plasmids replicate unidirectionally from fixed origins by a Θ mechanism. The location of these origins and the directions of replication have been determined relative to the physical maps. A cointegrate of pE194 and pUB110 has also been studied and evidence is presented from electron microscopy, temperature resistance, and copy number analysis that the cointegrate uses both parental replication origins.     

Nucleotide sequence and physical map of kanamycin-resistant plasmid pUB110 from Staphylococcus aureus

The complete nucleotide sequence of Staphylococcus aureus plasmid pUB10 was determined. The sequence consists of 4545 b.p. and contains 64% A-T and 36% G-C pairs. pUB110 was found to contain four open reading frames, capable of coding for polypeptides having more than 80 amino acids. All the putative polypeptides are coded for by one DNA strand. The molecular weights of four putative polypeptides are (in kilodaltons): A-49.5; B-38.8; C-28.8 and D-9.5. Polypeptide C is involved in kanamycin resistance. Polypeptide B is, possibly, involved in pUB110 replication. No role has yet been established for polypeptides A and D, since deletions in their coding sequences have no detectable effect on any properties of pUB110 plasmid.     

Increased stability of recombinant plasmids by Tn1000 insertion in chemostat cultures of recombinantEscherichia coli GT123

The stability of several pBR322-derived recombinant plasmids, carrying thethr operon fromEscherichia coli, was investigated in sulfur-limited chemostat cultures ofE. coli GT123. A marked increase in the segregational stability of one of these plasmids was observed. It is concluded that the increased stability was due to the spontaneous insertion of Tn1000 from the chromosome of the host into the plasmid.     

spbA locus ensures the segregational stability of pTH1030, a novel type of Gram-positive replicon

The replication region of the plasmid pHT1030 of Bacillus thuringiensis was previously mapped to a 2.9 kb DNA fragment. The DNA sequence was analysed and it was shown that the minimal replicon resides within a 1 kb fragment of DNA carrying no potential protein coding sequence. Moreover, no production of single-stranded DNA intermediates was detected in the plasmid-containing cells. pHT1030 therefore belongs to a class of replicons not previously described in Gram-positive bacteria. Examination of the segregational stability of deletion derivatives of pHT1030 in bacilli defined two stability regions. One is located within the minimal replicon of pHT1030, whereas the second (spbA) is not required for replication. spbA encodes a 15 kDa protein and ensures the segregational stability of the plasmid. This effect of spbA is particularly highlighted in sporulation. The absence of the spbA locus gives rise to plasmid-free spores at high frequency, whereas the spbA+ plasmids are stably maintained. The stability of the plasmids during sporulation seems to be correlated with an unequal division of the cell by the sporulation septum.     

Functional analysis of the dna (Ts) mutants of Bacillus subtilis: plasmid pUB110 replication as a model system

Summary We determined the effect of various Bacillus subtilis dna(Ts) mutations on pUB110 and chromosomal replication. Leading strand DNA synthesis of pUB110, starting by a nick at the plasmid replication origin (oriU), is performed by DNA polymerase III, since replication is blocked at non-permissive temperature in thermosensitive mutants dnaD, dnaF, dnaH and dnaN known to cause thermosensitivity of the various subunits of DNA polymerase III. When the lagging strand origin (oriL) is exposed, the DnaG protein (DNA primase) alone, or in association with unknown protein(s) binds asymmetrically to oriL to form a primer that is also extended by DNA polymerase III. In oriL ^- plasmids like pBT32, leading and lagging strand DNA syntheses are decoupled from each other. The DnaB protein, that is not required for pUB110 replication, may be associated with priming at a second unidentified lagging strand origin on pBT32. At non-permissive temperature, the dnaC30 and dnaI2 mutations affect both pUB110 and chromosomal DNA synthesis.     

Survey of plasmid profiles of <Emphasis Type="Italic">Shigella</Emphasis> species isolated in Malaysia during 1994–2000

Summary Plasmid profiling was used to characterize 219 strains of Shigellaspecies isolated from sporadic cases of shigellosis in Malaysia during the period 1994–2000. Heterogeneous plasmid patterns were observed in all Shigella spp. There was a correlation between plasmid patterns and serotypes of S. flexneri, S. dysenteriaeand S. sonnei. Five common small plasmids (>20.0 kb) were observed in S. flexneri1b and 2a, whereas six common small plasmids were found in serotype 3a. Some of these plasmids appeared to maintain their existence stably in each individual serotype. Plasmids of size 11.40 and 4.20 kb were present only in S. flexneri2a isolates, whereas the 4.40 kb plasmid was unique for serotype 3a. Large (>150 kb) or mid-range plasmid (20.0–150 kb) was not observed from any S. flexneri1b isolates. Eighty-nine percent of S. flexneriof various serotypes harboured the plasmid of 3.20 kb. All S. dysenteriaetype 2 isolates harboured the 9.00 kb plasmid, while four common small plasmids were found in S. sonneiisolates. The 2.10 kb plasmid was only seen in S. sonnei. Streptomycin resistance in S. dysenteriaetype 2 and multi-drug resistance in S. sonneimay be associated with the 9.00 and 14.8 kb plasmids, respectively. Plasmid profiling provided a further discrimination beyond serotyping and a useful alternative genotypic marker for differentiation of Shigellaspecies. To the best of our knowledge, this is the first report on the plasmid prevalence of the Malaysian Shigellaspecies.     

4',4' adenyltransferase activity on conjugative plasmids isolated from Staphylococcus aureus is encoded on an integrated copy of pUB110.

In staphylococci, linked resistance to the aminoglycosides kanamycin, neomycin, paromomycin, and tobramycin (KmNmPmTmr) is generally mediated by an aadD determinant which encodes production of an adenyltransferase aminoglycoside modifying enzyme, AAD(4',4'). The aadD resistance determinant is located on small multicopy plasmids such as pUB110, and has also been found on large multiresistance plasmids and on the chromosome in some strains. Examination of two conjugative plasmids from strains of Staphylococcus aureus isolated in North America indicated that the aadD determinant on these plasmids is located on an integrated copy of pUB110. The integrated pUB110 is flanked by direct repeats of the staphylococcal insertion sequence IS257. Analysis of the conjugative plasmid pSK41 showed an 8-bp duplication of the pUB110 sequence immediately adjacent to flanking IS257 elements, suggesting that integration of pUB110 was mediated by IS257.     

Conjugative plasmid pIP501 undergoes specific deletions after transfer from<Emphasis Type="Italic"> Lactococcus lactis</Emphasis> to<Emphasis Type="Italic"> Oenococcus oeni</Emphasis>

Conjugal transfer of plasmids pIP501 and its derivative pVA797 from Lactococcus lactis to Oenococcus oeni was assayed by filter mating. Plasmid pIP501 was transferred to a number of O. oeni strains whereas a single transconjugant of O. oeni M42 was recovered when pVA797 was used. Physical analysis of the transconjugant plasmids revealed that pIP501 and pVA797 underwent extensive deletions in O. oeni that affected the tra region (conjugal transfer) and SegB region (stability). All derivatives showed segregational instability in O. oeni, but were stably maintained in L. lactis. These differences correlated with the different plasmid copy numbers and the extent of deletions within the SegB region.Abbreviations CAT Chloramphenicol acetyltransferase - MLS Macrolides-lincosamides-streptogramin B resistance     

Structural and functional analysis of two cryptic plasmids from Lactobacillus pentosus MD353 and Lactobacillus plantarum ATCC 8014.

Summary The DNA sequences of a 2.4 kb plasmid (p353-2) from Lactobacillus pentosus MD353 and a 1.9 kb plasmid (p8014-2) from Lactobacillus plantarum ATCC 8014 show 81.5% overall similarity. Both plasmids carry elements (replication protein gene, plus-origin and minus-origin of replication), which are typical of plasmids that replicate via a rolling-circle mechanism of replication (RCR). Direct evidence for an RCR mechanism was obtained by showing the accumulation of single-stranded plasmid intermediates in the presence of rifampicin. A minus-origin of replication was defined for plasmids p353-2 and p8014-2 based on DNA sequence analysis and on its ability to convert single-stranded into double-stranded plasmid DNA. Plasmids pLPE323, pLPE350 and pLPC37 that are derived from the p353-2 or p8014-2 replicon are structurally and segregationally stable in L. pentosus MD353, L. plantarum ATCC 8014 and in Lactobacillus casei ATCC 393. The presence of Escherichia coli or DNA fragments in vectors derived from p353-2 or p8014-2 does not affect the structural stability but results in segregational instability of the vectors. The instability increases with increasing size of the inserted DNA fragment. Since vectors based on these replicons can be efficiently propagated in a wide variety of Lactobacillus species, they are highly suitable for cloning and expression of foreign DNA in Lactobacillus, provided that selective pressure is applied.This paper is dedicated with great appreciation to Dr. Frits Berends on the occasion of his retirement as Head of the Biochemistry Department of the TNO Medical Biological Laboratory     

Mobilization of closely related plasmids pUB110 and pBC16 by Bacillus plasmid pXO503 requires trans-acting open reading frame beta.

Genetic analysis of the closely related nonconjugative plasmids pUB110 and pBC16 has demonstrated that the open reading frame beta (ORF-beta) region in pUB110 and the corresponding homologous region in pBC16 are essential for mobilization of these plasmids by pLS20 or its derivatives. Deletions in this region or insertions that interrupted ORF-beta severely impaired or eliminated the mobilization of pUB110::pUC18 and pBC16::pUC18 hybrids. In contrast, a hybrid in which pUC18 was inserted into pBC16 at a point outside ORF-beta transferred at a frequency comparable to that of intact pUB110 or pBC16 (10(-4) transcipients per donor cell). The defect of most transfer-deficient (Mob-) hybrid plasmids could be complemented by an intact sister plasmid (i.e., pBC16 for pUB110::pUC18 Mob- hybrids). The inability to complement certain constructs suggested that the origin of transfer might be located in an area 5' to ORF-beta. Furthermore, cloning the region 5' to ORF-beta onto a nonmobilizable pC194::pUC18 construct resulted in a hybrid plasmid, pUCCoriTBC16, that could be mobilized with complementation. These results indicate that mobilization of pUB110 and pBC16 by conjugative helper plasmids requires ORF-beta in trans and at least one other region, including the RSA sequence, which presumably functions as an origin of transfer, in cis.