Micromechanics of smooth adhesive organs in stick insects: pads are mechanically anisotropic and softer towards the adhesive surface

Animals have evolved adhesive structures on their legs to cling to the substrate during locomotion. Here we characterise the ultrastructure and mechanical properties of adhesive pads in Carausius morosus (Phasmatodea) using atomic force microscopy (AFM) as well as transmission and scanning electron microscopy (TEM, SEM). The smooth adhesive arolium has a soft cuticle consisting of principal rods, which branch into finer fibres near the surface. Indentation experiments showed that the pad material consists of distinct layers with different mechanical properties. The 100–300 nm thick outermost layer consisting of the cuticulin envelope and the epicuticle is extremely soft and resilient (mean effective Young’s modulus 12 kPa), while the subjacent procuticle is a much stiffer material (mean effective Young’s modulus 625 kPa). AFM contact mode imaging revealed that the cuticle is mechanically anisotropic, which can be explained by its fibrillar inner structure. We propose that the described layered structure of smooth adhesive pads, consisting of materials decreasing in stiffness towards the outer surface, represents a superior design to conform and adhere to substrates with roughnesses at different length scales. This design principle could be easily implemented in technical adhesives, and thus has a potential to inspire biomimetic applications.     

球孢白僵菌在棉铃虫表皮上萌发的研究

在扫描电子显微镜下,观察了球孢白僵菌三株不同毒力菌株的分生孢子在棉铃虫幼虫表皮表面的萌发,发现高、低毒力菌株的分生孢子都能在棉铃虫幼虫表皮上萌发和生长,但高毒力菌株的萌芽管伸长至分生孢子长径的1.5～2.5倍时能发生定向生长,垂直向里穿透表皮,低毒力菌株的萌芽管呈蔓延生长,极少有穿透表皮的发生,偶见极度伸长的菌丝穿透表皮。此外,还发现球孢白僵菌穿透菌丝穿透表皮的过程不是垂直向里一步完成的。     

An overview on plant cuticle biomechanics

Plant biomechanics combines the principles of physics, chemistry and engineering to answer questions about plant growth, development and interaction with the environment. The epidermal-growth-control theory, postulated in 1867 and verified in 2007, states that epidermal cells determine the rate of organ elongation since they are under tension, while inner tissues are under compression. The lipid cuticle layer is deposited on the surface of outer epidermal cell walls and modifies the chemical and mechanical nature of these cell walls. Thus, the plant cuticle plays a key role in plant interaction with the environment and in controlling organ expansion. Rheological analyses indicate that the cuticle is a mostly viscoelastic and strain-hardening material that stiffens the comparatively more elastic epidermal cell walls. Cuticle stiffness can be attributed to polysaccharides and flavonoids present in the cuticle whereas a cutin matrix is mainly responsible for its extensibility. Environmental conditions such as temperature and relative humidity have a plasticizing effect on the mechanical properties of cuticle since they lower cuticle stiffness and strength.The external appearance of agricultural commodities, especially fruits, is of great economic value. Mechanical properties of the cuticle can have a positive or negative effect on disorders like fruit cracking, fungal pathogen penetration and pest infestation. Cuticle rheology has significant variability within a species and thus can be subjected to selection in order to breed cultivars resistant to pests, infestation and disorders.     

Cuticle chirality and body handedness in Caenorhabditis elegans

Caenorhabditis elegans adult animals exhibit an inherent chirality of fiber orientation in the basal layer of the cuticle, as well as a naturally invariant but experimentally reversible handedness in the left-right (L-R) asymmetry of the body plan. We have examined the relationship between cuticle chirality and body handedness in normal and L-R reversed animals, using Roller (Rol) mutants and transmission electron microscopy to monitor cuticle properties. Rol phenotypes, several of which have been shown to result from mutations in cuticle collagen genes, are characterized by an invariant, allele-specific handedness in their direction of rolling. We show for several alleles that this direction is not affected by L-R reversal of the body plan. We further show, by electron microscopy, that the chiral orientation of cuticle fibers in animals with normal cuticle is not reversed by L-R body-plan reversal. We conclude that cuticle chirality must be established independently of body-plan handedness. The cues that establish cuticle chirality are still unknown, as are the causes for different rolling directions in different Roller mutants. We discuss the question of how cuticle chirality maintains its independence, and how the orientations of the fiber layers may be determined. Dev. Genet. 23:164–174, 1998. © 1998 Wiley-Liss, Inc.     

The stabilization of locust cuticle

Cuticle from the metathoracic femur of adult locusts (Locusta migratoria) is characterized with respect to changes in water content and in protein extractability during maturation. The swelling behaviour and extractability of fully-sclerotized cuticle are compared to those of chemically-modified, unsclerotized cuticle.It is concluded that although dehydration may contribute to the stabilization of cuticle, it cannot account for the observed differences. The properties of mature cuticle can best be explained by the assumption that covalent cross-links are present between protein molecules.     

Electron microscopic and preparative methods for the analysis of isopod cuticle

The crustacean cuticle consists of a complex organic matrix and a mineral phase. The physical and chemical properties of the cuticle are corellated to the specific functions of cuticular elements, leading to a large variety in its structure and composition. Investigation of the structure-function relationship in crustacean cuticle requires sophisticated methodological tools for the analysis of different aspects of the cuticular architecture. In the present paper we report improved preparation methods that, in combination with various electron microscopic techniques, have led to new insights of cuticle structure and composition in the tergite cuticle of Porcellio scaber. We used thin sections of non-decalcified tergites and decalcified resin embedded material for transmission electron microscopy and scanning transmission electron microscopy. Etched sagittal planes of bulk tergite samples were analysed with field emission scanning electron microscopy. We have found a distinct distal region within the exocuticle that differs from the subjacent proximal exocuticle in the arrangement of fibres. Within this distal exocuticle chitin-protein fibrils assemble to fibres with diameters between 15 and 50 nm that are embedded in a mineral matrix. In the proximal exocuticle and the endocuticle fibrils do not assemble to fibres and are surrounded by mineral individually. Furthermore, we show that the pore canals are filled with mineral, and demonstrate that mild etching of polished sagittal cuticle surfaces reveals regions containing mineral of diverse solubility.     

A new method for rapid visualization of defects in leaf cuticle reveals five intrinsic patterns of surface defects in Arabidopsis

The epidermis of higher plants generates the cuticle layer that covers the outer surface of each plant. The cuticle plays a crucial role in plant development, and some mutants with defective cuticle exhibit morphological abnormalities, such as the fusion of organs. The way in which the cuticle forms and its contribution to morphogenesis are poorly understood. Conventional detection of the cuticle by transmission electron microscopy (TEM) requires laborious procedures, which include fixation, staining with osmium, and preparation of ultra-thin sections. It is also difficult to survey entire surfaces of expanded leaves because of the limited size of specimens that can be examined. Thus, TEM is unsuitable for large-scale screening for mutants with defective cuticle. We describe here a rapid and inexpensive method, designated the toluidine-blue (TB) test, for detection of cuticular defects in whole leaves. We demonstrated the validity of the TB test using mutants of Arabidopsis thaliana, including abnormal leaf shape1 (ale1), fiddlehead (fdh), and five eceriferum (cer) mutants, in which the structure and/or function of the cuticle is abnormal. Genetic screening for mutants using the TB test allowed us to identify seven loci. The cuticle-defective regions of leaves of the mutants revealed five intrinsic patterns of surface defects (classes I through V), suggesting that formation of functional cuticle on leaves involves various spatially regulated factors.     

Investigation of locust cuticle using the insecticide diflubenzuron.

Diflubenzuron inhibits the synthesis of chitin (Verloop, in prep.). Some of the resulting possibilities for the investigation of cuticle are explored in this paper. The cuticle of locusts treated with DFB is prone to fracture in characteristic ways. This is of relevance in studying the function of the exoskeleton. Cuticle affected by DFB was examined by polarised light microscopy. Three contrasting regions were used; the prealar arm, the proximal end of the hind tibia and the mandibles. The action of a protease on these regions was studied. The residual chitin content was estimated by analysing hydrolysates of cuticle samples for glucosamine.The results show that chitin is removed to a sufficient extent for the structural coherence and optical properties of the cuticle to be dependent on the proteins. Only in some regions is a stable layer of cuticle formed after treatment with DFB. In these regions, new information about the proteins of cuticle can be obtained. Of particular significance is the observation of a protein helicoid in part of the tibia.     

Consideration of the importance of hydrophobic interactions in stabilizing insect cuticle

Protein fractions of insect cuticles with different mechanical properties have related values of polarity and hydrophobicity. Hydrophobicity is important for the self-assembly of cuticle which is produced prior to the moult and in plasticization of cuticle. The cuticles of soft-bodied fly larvae are quite distinct from those of exopterygotes (e.g. locusts) and this can be related to the chemistry and mode of tanning. The properties of cuticular proteins are compared: the proteins of the pliant cuticles most closely resemble globulins, and the proteins in stiff cuticles are more like fibrous and hydrophobic structural proteins. Changes in the environment of the proteins may alter their shape and hence the mechanical properties of the cuticle.     

Investigation of human hair cuticle structure by microdiffraction: direct observation of cell membrane complex swelling.

The cuticle of mammalian hair fibres protects the core of the fibre against physical and chemical stress. The structure and some of the properties of the cuticle have been extensively studied by electron microscopy. However, there is still a need for a less invasive structural probe. For this purpose, microdiffraction experiments have been carried out on human hair samples showing a characteristic small-angle X-ray scattering pattern for the cuticle. This pattern has been assigned to the cell membrane complex (CMC) between each cuticle scale. Using a simple model of the electron density within the CMC, values have been derived for the average thickness of the beta- and delta-layers which are close to those obtained by electron microscopy. In order to illustrate the potentialities of microdiffraction in studying the properties of the cuticle, the effect of water sorption has been monitored. Using the intensity modelling described above, a 10% swelling of the delta-layer's thickness has been observed. This study shows that structural modifications of the CMC by physical or chemical stress can be followed directly on the cuticle of human hair fibres by microdiffraction analysis.     

Design and mechanical properties of insect cuticle

Since nearly all adult insects fly, the cuticle has to provide a very efficient and lightweight skeleton. Information is available about the mechanical properties of cuticle-Young's modulus of resilin is about 1 MPa, of soft cuticles about 1 kPa to 50 MPa, of sclerotised cuticles 1-20 GPa; Vicker's Hardness of sclerotised cuticle ranges between 25 and 80 kgf mm(-2); density is 1-1.3 kg m(-3)-and one of its components, chitin nanofibres, the Young's modulus of which is more than 150 GPa. Experiments based on fracture mechanics have not been performed although the layered structure probably provides some toughening. The structural performance of wings and legs has been measured, but our understanding of the importance of buckling is lacking: it can stiffen the structure (by elastic postbuckling in wings, for example) or be a failure mode. We know nothing of fatigue properties (yet, for instance, the insect wing must undergo millions of cycles, flexing or buckling on each cycle). The remarkable mechanical performance and efficiency of cuticle can be analysed and compared with those of other materials using material property charts and material indices. Presented in this paper are four: Young's modulus-density (stiffness per unit weight), specific Young's modulus-specific strength (elastic hinges, elastic energy storage per unit weight), toughness-Young's modulus (fracture resistance under various loading conditions), and hardness (wear resistance). In conjunction with a structural analysis of cuticle these charts help to understand the relevance of microstructure (fibre orientation effects in tendons, joints and sense organs, for example) and shape (including surface structure) of this fibrous composite for a given function. With modern techniques for analysis of structure and material, and emphasis on nanocomposites and self-assembly, insect cuticle should be the archetype for composites at all levels of scale.     

Enhancing the egg's natural defence against bacterial penetration by increasing cuticle deposition

The cuticle is a proteinaceous layer covering the avian egg and is believed to form a defence to microorganism ingress. In birds that lay eggs in challenging environments, the cuticle is thicker, suggesting evolutionary pressure; however, in poultry, selection pressure for this trait has been removed because of artificial incubation. This study aimed to quantify cuticle deposition and to estimate its genetic parameters and its role on trans‐shell penetration of bacteria. Additionally, cuticle proteins were characterised to establish whether alleles for these genes explained variation in deposition. A novel and reliable quantification was achieved using the difference in reflectance of the egg at 650 nm before and after staining with a specific dye. The heritability of this novel measurement was moderate (0.27), and bacteria penetration was dependent on the natural variation in cuticle deposition. Eggs with the best cuticle were never penetrated by bacteria (P < 0.001). The cuticle proteome consisted of six major proteins. A significant association was found between alleles of one of these protein genes, ovocleidin‐116 (MEPE), and cuticle deposition (P = 0.015) and also between alleles of estrogen receptor 1 (ESR1) gene and cuticle deposition (P = 0.008). With the heritability observed, genetic selection should be possible to increase cuticle deposition in commercial poultry, so reducing trans‐generational transmission of microorganisms and reversing the lack of selection pressure for this trait during recent domestication.     

Superhydrophobic cuticle with a "pinning effect" in the larvae of the iris sawfly, Rhadinoceraea micans (Hymenoptera, Tenthredinidae)

The integument of some sawfly larvae can be easily damaged causing haemolymph bleeding (easy bleeding phenomenon). In the present study, we investigated intact cuticle, cuticle without wax coverage and cuticle replicas of sawfly larvae by using cryo-scanning electron microscopy and contact angle (CA) measurements. The easy bleeder Rhadinoceraea micans was compared to the non-easy bleeder Nematus pavidus (both Tenthredinidae), and the examination showed that the surface structures of R. micans were hierarchically arranged, whereas the cuticle surface of N. pavidus appeared much smoother. The intact cuticle proved to be superhydrophobic in R. micans (CAs: 156° dorsally, 120° ventrally), but not in N. pavidus (CAs: 67° dorsally, 47° ventrally). The wettability of R. micans increased significantly after the waxes had been peeled off. Replicas of the intact cuticle surface were hardly wettable in both species. It is suggested that wax crystals in combination with cuticle microsculptures are the most important features for rendering the integument of the easy bleeder species superhydrophobic. The wax-free tips of the cuticle microsculptures in R. micans are sites where haemolymph droplets can adhere. The integument surface of easy bleeders is assumed to be adapted to their particular defence strategy, simultaneously contributing to the maintenance and "reuse" of released haemolymph droplets on the superhydrophobic surface due to this "pinning effect".     

A new technique for measurement of water permeability of stomatous cuticular membranes isolated from Hedera helix leaves

Transpiration of cuticular membranes isolated from the lower stomatous surface of Hedera helix (ivy) leaves was measured using a novel approach which allowed a distinction to be made between gas phase diffusion (through stomatal pores) and solid phase diffusion (transport through the polymer matrix membrane and cuticular waxes) of water molecules. This approach is based on the principle that the diffusivity of water vapour in the gas phase can be manipulated by using different gases (helium, nitrogen, or carbon dioxide) while diffusivity of water in the solid phase is not affected. This approach allowed the flow of water across stomatal pores ('stomatal transpiration') to be calculated separately from the flow across the cuticle (cuticular transpiration) on the stomatous leaf surface. As expected, water flux across the cuticle isolated from the astomatous leaf surface was not affected by the gas composition since there are no gas-filled pores. Resistance to flux of water through the solid cuticle on the stomatous leaf surface was about 11 times lower than cuticular resistance on the astomatous leaf surface, indicating pronounced differences in barrier properties between cuticles isolated from both leaf surfaces. In order to check whether this difference in resistance was due to different barrier properties of cuticular waxes on both leaf sides, mobility of 14C-labelled 2,4-dichlorophenoxy-butyric acid 14C-2,4-DB) in reconstituted cuticular wax isolated from both leaf surfaces was measured separately. However, mobility of 14C-2,4-DB in reconstituted wax isolated from the lower leaf surface was 2.6 times lower compared with the upper leaf side. The significantly higher permeability of the ivy cuticle on the lower stomatous leaf surface compared with the astomatous surface might result from lateral heterogeneity in permeability of the cuticle covering normal epidermal cells compared with the cuticle covering the stomatal cell surface.     

Ascaris lumbricoides suum: morphological characterization of apparent cuticular pores by ionic permeability and electron microscopy

The cuticle of the parasitic roundworm Ascaris lumbricoides suum has been found to contain apparent pores, using scanning and transmission electron microscopy. However, X-ray spectral analysis and dot mapping analysis of diffusing divalent cations in the cuticle found these ions to be randomly distributed on the pseudocoelomic surface of the cuticle. This indicates that the pores seen with the electron microscope were not true structural pores and that the cuticle is homogeneously permeable to ions.     

Fine structure of the chitin-protein system in the crab cuticle

The fine structure of the organic matrix of the shore crab cuticle (Carcinus maenas L.), observed in transmission electron microscopy, reveals three different levels of organization of the chitin—protein complex. The highest level corresponds to the ‘twisted plywood’ organization described by Bouligand (1972). Horizontal microfibrils, parallel to the cuticle plane, rotate progressively from one level to another. When viewed in oblique section this structure gives superimposed series of nested arcs, visible in light microscopy or at the lowest magnifications of the electron microscope, in all the chitin-protein layers. At the highest magnifications of the electron microscope and with the best resolution, when the ultrathin sections are exactly transverse to the microfibril, a constant pattern can be observed which consists of rods transparent to electrons, which are embedded in an electron-opaque matrix. In cross-section, these rods often form more or less hexagonal arrays. We call a microfibril one rod and the adjacent opaque material, and question the usual interpretation of the microfibril molecular structure. Between these two levels of organization, there is an intermediate level, which corresponds to the grouping of microfibrils. Microfibrils form a dense structure, with few free spaces in the membranous layer, the deepest and non-calcified layer of the cuticle. In other parts of the cuticle, microfibrils are grouped into fibrils of various diameters or form a reticulate structure, the free spaces of the organic matrix being occupied by the mineral.     

Ultrastructure of filamentous microorganisms associated with zebra cyathostomes

Filamentous microorganisms were observed colonizing the cuticle of cyathostomes (Nematoda: Strongylidae) collected from the large intestine of Burchell's zebra (Equus burchelli antiquorum). Scanning (SEM) and transmission (TEM) electron microscopy revealed three filamentous microorganisms, designated as segmented, continuous multicellular, and helical. The segmented and continuous multicellular morphotypes each revealed a process of segmentation in their developmental stages, and those of the segmented filaments are demonstrated in this report. In contrast, the helical types of filaments appeared to be complexes of spiraling rodshaped organisms. In addition to these filaments, the cyathostome cuticle was also colonized by other smaller microorganisms.     

Dual structural color mechanisms in a scarab beetle

The cuticle of a Mycterophallus cetoniine scarab species displays both red iridescence due to a multilayer reflector mechanism and rainbow iridescence due to a superimposed diffraction grating mechanism. This is the first reported example of an animal possessing two independent classes of structural colors arising from interference at the wavelengths of visible light. In this work, the Mycterophallus cuticle is characterized by light microscopy, spectrophotometry, scanning electron microscopy, and transmission electron microscopy. We compare the cuticle of the Mycterophallus species to two closely related Lomaptera scarab species, one with only a multilayer reflector and the second with only a diffraction grating. We calculate the correspondence between the nanostructural parameters and the optical properties of the Mycterophallus cuticle to determine the relative optical contributions of the two color mechanisms and the interactions between them. J. Morphol., 2010. © 2010 Wiley‐Liss, Inc.     

Cuticle of Caenorhabditis elegans: its isolation and partial characterization

The adult cuticle of the soil nematode, Caenorhabditis elegans, is a proteinaceous extracellular structure elaborated by the underlying layer of hypodermal cells during the final molt in the animal's life cycle. The cuticle is composed of an outer cortical layer connected by regularly arranged struts to an inner basal layer. The cuticle can be isolated largely intact and free of all cellular material by sonication and treatment with 1% sodium dodecyl sulfate (SDS). Purified cuticles exhibit a negative material in the basal cuticle layer. The cuticle layers differ in their solubility in sulfhydryl reducing agents, susceptibility to various proteolytic enzymes and amino acid composition. The struts, basal layer, and internal cortical layer are composed of collagen proteins that are extensively cross-linked by disulfide bonds. The external cortical layer appears to contain primarily noncollagen proteins that are extensively cross-linked by nonreducible covalent bonds. The collagen proteins extracted from the cuticle with a reducing agent can be separated by SDS-polyacrylamide gel electrophoresis into eight major species differing in apparent molecular weight.