Isolation and characterization of chromosome-specific DNA sequences from a chromosome arm genomic library of common wheat

Isolation, physical mapping and polymorphism of chromosome-specific DNA sequences in wheat are reported. Following the microdissection of the long arm of chromosome 5B (5BL) of common wheat, its DNA was amplified by degenerate oligonucleotide-primed PCR and directly cloned into plasmid vectors. Characterization of the chromosome arm library showed that ∼55% of the inserts are of low-copy nature. Southern analysis using aneuploid lines of common wheat revealed that five of 11 low-copy inserts analyzed map to chromosome arm 5BL; four of these are 5BL-specific. By deletion mapping, the 5BL-specific sequences were located to sub- chromosome arm regions. Based on the hybridization patterns of three 5BL-specific sequences to DNA from a diverse collection of goat-grass ( Aegilops ) and wheat ( Triticum ) species, it was concluded that these sequences emerged at different times in the course of evolution of this group of plant species.     

Isolation and characterization of S genome specific sequences from Aegilops sect. sitopsis species.

Three S genome specific sequences were isolated from Aegilops sect. sitopsis species using different experimental approaches. Two clones, UTV86 and UTV39, were isolated from a partial genomic library obtained from DNA of Aegilops sharonensis, whereas a third clone, UTV5, was isolated from Aegilops speltoides. The three clones were characterized by sequencing, analysis of methylation, and sequence organization and abundance in some Aegilops and Triticum species. The clones UTV39 and UTV5 belong to the same family of tandem repeated sequences and showed high homology with a sequence already present in nucleotide databases. The UTV86 clone from Ae. sharonensis corresponded to an interspersed low frequency repeated sequence and did not show any significant homology with reported sequences. Southern hybridization experiments, using the cloned sequences as probes, detected polymorphism in the restriction patterns of all the five Aegilops species in section sitopsis. Aegilops speltoides showed the most divergent hybridization pattern. A close relationship was detected between the S genome of Ae. speltoides and the G genome of the wild Triticum timopheevii. In situ hybridization revealed a telomeric and (or) subtelomeric location of the sequences UTV39 and UTV5.     

Isolation and nucleotide sequences of cDNA clones encoding ADP-glucose pyrophosphorylase polypeptides from wheat leaf and endosperm

A cDNA clone (WL : AGA.1) encoding wheat leaf ADP-glucose pyrophosphorylase has been isolated from a gt11 expression library, by immunological screening with anti-spinach leaf ADP-glucose pyrophosphorylase serum. The WL : AGA.1 cDNA is 948 bp long and contains approximately 55% of the complete wheat leaf ADP-glucose pyrophosphorylase mRNA sequence, estimated from Northern blot experiments. A wheat endosperm cDNA library was subsequently constructed in gt11 and six clones hybridising to the cDNA insert of clone WL : AGA.1 were isolated. The longest of these wheat endosperm ADP-glucose pyrophosphorylase cDNAs, clone WE : AGA.7, is nearly full-length (1798 bp), indicated by Northern blot analysis of wheat endosperm mRNA and nucleotide sequence analysis.Southern hybridisation analysis and restriction enzyme mapping indicated that the wheat leaf and wheat endosperm ADP-glucose pyrophosphorylase cDNAs and genes are members of two distinct gene families. In addition, restriction enzyme mapping revealed polymorphism in the wheat endosperm ADP-glucose pyrophosphorylase cDNAs, indicating the existence of at least two wheat endosperm ADP-glucose pyrophosphorylase gene sub-families.Subsequent nucleotide sequence analysis indicates that there is approximately 55% identity between wheat leaf and wheat endosperm ADP-glucose pyrophosphorylase cDNAs. In contrast, members of each sub-family of endosperm cDNA, represented by clones WE : AGA.3 and WE : AGA.7, are 96% identical.     

Characterization of tomato SSR markers developed using BAC-end and cDNA sequences from genome databases

We developed nearly 700 non-redundant 2- or 3-base simple sequence repeat (SSR) markers from tomato using sequence data obtained from open genome databases. Among various types of core motifs, AT was most abundant in SSRs derived from cDNAs (~53%) and bacterial artificial chromosome (BAC) ends (~72%). There was a positive correlation between the rate of detection of polymorphic alleles (heterozygosity value; Hv) and the repeat number of the core motif in all markers showing polymorphisms among at least one pair of six cultivars or lines tested (r = 0.566**). The average Hv of BAC-end-derived SSR markers (~0.5) was higher than that of cDNA-derived markers (~0.3). These characteristics of BAC-end-derived SSRs are useful for genetic studies using closely related cultivars and lines. However, BAC-end-derived SSRs tended to cluster in centromeric regions (~80%). A scheme for the construction of a high-density linkage map of tomato is discussed.     

Identification of barley genome segments introgressed into wheat using PCR markers.

Barley has several important traits that might be used in the genetic improvement of wheat. For this report, we have produced wheat-barley recombinants involving barley chromosomes 4 (4H) and 7 (5H). Wheat-barley disomic addition lines were crossed with 'Chinese Spring' wheat carrying the phlb mutation to promote homoeologous pairing. Selection was performed using polymerase chain reaction (PCR) markers to identify lines with the barley chromosome in the ph1b background. These lines were self pollinated, and recombinants were identified using sequence-tagged-site (STS) primer sets that allowed differentiation between barley and wheat chromosomes. Several recombinant lines were isolated that involved different STS-PCR markers. Recombination was confirmed by allowing the lines to self pollinate and rescreening the progeny via STS-PCR. Progeny testing confirmed 9 recombinants involving barley chromosome 4 (4H) and 11 recombinants involving barley chromosome 7 (5H). Some recombinants were observed cytologically to eliminate the possibility of broken chromosomes. Since transmission of the recombinant chromosomes was lower than expected and since seed set was reduced in recombinant lines, the utility of producing recombinants with this method is uncertain.     

Isolation and characterization of microsatellites from the canine genome

Microsatellite sequences comprising (dC-dA)_n.(dG-dT)_n repeats have been isolated from canine libraries and sequenced. Oligonucleotide primers have been synthesized to the micro-satellite flanking sequences and used in the polymerase chain reaction to amplify those loci from genomic DNA. The degree of polymorphism of each microsatellite was estimated in a set of unrelated dogs. It is concluded that of the 10 loci studied, nine are sufficiently polymorphic to be useful in genetic studies.     

Isolation of lambda and YAC clones from defined regions of the rye genome

A dispersed, rye-specific element has been used to isolate clones of rye origin from wheat plants containing only a single rye chromosome arm or segment. In this way a set of 23 YAC clones has been isolated from the short arm of rye chromosome 1 (1RS). This technique was extended to isolate clones from a small region of 1RS that contains a large number of agronomically important genes. The targeted cloning method allowed the isolation of 26 classes of lambda clones representing about 5% of the region. Ten of the lambda clones could be mapped to segments within this region. A third example of the application of this technique involved the isolation of clones from a very small but fully functional rye chromosome, the midget chromosome. These clones have allowed the confirmation of the origin of the midget from 1RL, and may provide a tool for the isolation of structural elements of cereal chromosomes. This technique allows the identification of clone libraries for any rye chromosome or chromosome arm, since substitution, addition and translocation lines are available for all rye chromosomes. Furthermore, the technique allows isolation of clones derived from segments of the rye genome recombined into wheat. The method is technically simple and both lambda and YAC libraries can be constructed. Synteny between the genomes of the cereals allows region-specific libraries from rye to be used to target regions of the wheat and barley genomes.     

Isolation of lambda and YAC clones from defined regions of the rye genome

A dispersed, rye-specific element has been used to isolate clones of rye origin from wheat plants containing only a single rye chromosome arm or segment. In this way a set of 23 YAC clones has been isolated from the short arm of rye chromosome 1 (1RS). This technique was extended to isolate clones from a small region of 1RS that contains a large number of agronomically important genes. The targeted cloning method allowed the isolation of 26 classes of lambda clones representing about 5% of the region. Ten of the lambda clones could be mapped to segments within this region. A third example of the application of this technique involved the isolation of clones from a very small but fully functional rye chromosome, the midget chromosome. These clones have allowed the confirmation of the origin of the midget from 1RL, and may provide a tool for the isolation of structural elements of cereal chromosomes. This technique allows the identification of clone libraries for any rye chromosome or chromosome arm, since substitution, addition and translocation lines are available for all rye chromosomes. Furthermore, the technique allows isolation of clones derived from segments of the rye genome recombined into wheat. The method is technically simple and both lambda and YAC libraries can be constructed. Synteny between the genomes of the cereals allows region-specific libraries from rye to be used to target regions of the wheat and barley genomes. Received: 25 June 1997 / Accepted: 11 November 1997     

Isolation and characterization of two middle repetitive DNA sequences of nuclear tobacco genome

Summary Two DNA sequences, R8.1 and R8.3, representing two distinct classes of tobacco genomic repeated DNA, were cloned and characterized by Southern blot analysis. Both R8.1 and R8.3 were found to be homologous to the Nicotiana tomentosiformis component of the allotetraploid Nicotiana tabacum genome, and each of them represents about 0.3% of nuclear DNA. The R8.1 and R8.3 differ in the mode of distribution in chromosomes, as revealed by in situ DNA/DNA hybridization.     

Isolation and characterization of genomic mouse DNA clones containing sequences homologous to tRNAs and 5S rRNA.

We have cloned and characterized three fragments of Balb/c mouse DNA which hybridize to mouse cell tRNAs. Fractionation of the tRNAs which hybridize to these clones reveals that two of the clones, lambda Mt-4A and lambda Mt-6A hybridize to only one or two tRNAs, while one clone, lambda Mt-4B, hybridizes to at least seven tRNAs. Two of the tRNAs were identified as tRNAProCCG and tRNAGlyGGA, and others have been identified as tRNAs which are selectively encapsidated into virions of murine leukemia virus and avian reticuloendotheliosis virus. The DNA sequences of putative genes for tRNAProCCG and tRNAGlyGGA, plus flanking regions, were determined. A clone of Balb/c mouse DNA which selectively hybridized to 5S rRNA was also isolated and partially characterized.     

Structural analysis of a Lotus japonicus genome. V. Sequence features and mapping of sixty-four TAC clones which cover the 6.4 mb regions of the genome.

We determined the nucleotide sequences of 64 TAC (transformation-competent artificial chromosome) clones selected from genomic libraries of Lotus japonicus accession Miyakojima MG-20 based on the sequence information of expressed sequence tags (ESTs), cDNAs, genes and DNA markers from L. japonicus and other legumes. The length of the DNA regions sequenced in this study was 6,370,255 bp, and the total length of the L. japonicus genome sequenced so far is 32,537,698 bp together with the nucleotide sequences of 256 TAC clones previously reported. Five hundred forty-eight potential protein-encoding genes with known or predicted functions, 127 gene segments and 224 pseudogenes were assigned to the newly sequenced regions by computer prediction and similarity searches against the sequences in protein and EST databases. Based on the nucleotide sequences of the clones, simple sequence repeat length polymorphism (SSLP) or derived cleaved amplified polymorphic sequence (dCAPS) markers were generated, and each clone was genetically localized onto the linkage map of two accessions of L. japonicus, MG-20 and Gifu B-129. The sequence data, gene information and mapping information are available through the World Wide Web at http://www.kazusa.or.jp/lotus/.     

Structural analysis of a Lotus japonicus genome. IV. Sequence features and mapping of seventy-three TAC clones which cover the 7.5 mb regions of the genome.

Using the sequence information of expressed sequences tags (ESTs), cDNAs and genes from Lotus japonicus and other legumes, 73 TAC (transformation-competent artificial chromosomes) clones were selected from a genomic library of L. japonicus accession MG-20, and their nucleotide sequences were determined. The length of the DNA sequenced in this study was 7,455,959 bp, and the total length of the DNA regions sequenced so far is 26,167,443 bp together with the nucleotide sequences of 183 TAC clones previously reported. By similarity searches against the sequences in protein and EST databases and prediction by computer programs, a total of 699 potential protein-encoding genes with known or predicted functions, 163 gene segments and 267 pseudogenes were assigned to the newly sequenced regions. Based oil the nucleotide sequences of the clones, simple sequence repeat length polymorphism (SSLP) or derived cleaved amplified polymorphic sequence (dCAPS) markers were generated, and each clone was located onto the linkage map of two accessions of L. japonicus, Gifu B-129 and Miyakojima MG-20. The sequence data, gene information and mapping information are available through the World Wide Web at http://www.kazusa.or.jp/lotus/.     

Structural analysis of a Lotus japonicus genome. I. Sequence features and mapping of fifty-six TAC clones which cover the 5.4 mb regions of the genome.

A total of 56 TAC clones with an average insert size of 100 kb were isolated from a TAC library of the Lotus japonicus genome based on the expressed sequences tags (ESTs), cDNA and gene information, and their nucleotide sequences were determined according to the shot-gun based strategy. The total length of the sequenced regions is 5,473,195 bp. By comparison with the sequences in protein and EST databases and analysis with computer programs for gene modeling, a total of 605 potential protein-encoding genes with known or predicted functions, 69 gene segments, and 172 pseudogenes were identified. The average density of the genes assigned so far is 1 gene/8120 bp. Introns were identified in approximately 78% of the potential genes. There was an average of 3.8 introns per gene and the average length of the introns was 375 bp. DNA markers were generated based on the nucleotide sequences obtained, and each clone was mapped onto the linkage map using the F2 mapping population derived from a cross of L. japonicus Gifu B-129 and Miyakojima MG-20. The sequence data, gene information and mapping information are available through the World Wide Web at http://www.kazusa.or.jp/lotus/.     

Structural analysis of a Lotus japonicus genome. III. Sequence features and mapping of sixty-two TAC clones which cover the 6.7 Mb regions of the genome.

A total of sixty-two clones were selected from a TAC (transformation-competent artificial chromosome) genomic library of the Lotus japonicus accession MG-20 based on the sequence information of expressed sequence tags (ESTs), cDNA and gene information, and their nucleotide sequences were determined. The length of the sequenced regions in this study is 6,682,189 bp, and the total length of the regions sequenced so far is 18,711,484 bp together with the nucleotide sequences of 121 TAC clones previously reported. By comparison with the sequences in protein and EST databases and analysis with computer programs for gene modeling, a total of 573 potential protein-coding genes with known or predicted functions, 91 gene segments and 272 pseudogenes were identified in the newly sequenced regions. Each of the sequenced clones was localized onto the linkage map of two accessions of L. japonicus, Gifu B-129 and Miyakojima MG-20, using simple sequence repeat length polymorphism (SSLP) or derived cleaved amplified polymorphic sequence (dCAPS) markers generated based on the nucleotide sequences of the clones. The sequence data, gene information and mapping information are available through the World Wide Web at http://www.kazusa.or.jp/lotus/.     

Structural analysis of a Lotus japonicus genome. II. Sequence features and mapping of sixty-five TAC clones which cover the 6.5-mb regions of the genome.

Sixty-five TAC (transformation-competent artificial chromosomes) clones were selected from a genomic library of Lotus japonicus accession MG-20 based on the sequence information of expressed sequences tags (ESTs), cDNA and gene information, and their nucleotide sequences were determined. The average insert size of the TAC clone was approximately 100 kb, and the total length of the sequenced regions in this study is 6,556,100 bp. Together with the nucleotide sequences of 56 TAC clones previously reported, the regions sequenced so far total 12,029,295 bp. By comparison with the sequences in protein and EST databases and by analysis with computer programs for gene modeling, a total of 711 potential protein-encoding genes with known or predicted functions, 239 gene segments and 90 pseudogenes were identified in the newly sequenced regions. The average gene density assigned so far was 1 gene/9140 bp. The average length of the assigned genes was 2.6 kb, which is considerably larger than that assigned in the Arabidopsis thaliana genome (1.9 kb for 6451 genes). Introns were identified in approximately 73% of the potential genes, and the average number and length of the introns per gene were 3.4 and 377 bp, respectively. Simple sequence repeat length polymorphism (SSLP) or derived cleaved amplified polymorphic sequence (dCAPS) markers were generated based on the nucleotide sequences of the genomic clones obtained, and each clone was mapped onto the linkage map using the F2 mapping population derived from a cross of two accessions of L. japonicus, Gifu B-129 and Miyakojima MG-20. The sequence data, gene information and mapping information are available through the World Wide Web at http://www.kazusa.or.jp/lotus/.