Estimation of relative allele frequencies of single-nucleotide polymorphisms in different populations by microarray hybridization of pooled DNA

Single-nucleotide polymorphisms (SNPs) are considered useful polymorphic markers for genetic studies of polygenic traits. A new practical approach to high-throughput genotyping of SNPs in a large number of individuals is needed in association study and other studies on relationships between genes and diseases. We have developed an accurate and high-throughput method for determining the allele frequencies by pooling the DNA samples and applying a DNA microarray hybridization analysis. In this method, the combination of the microarray, DNA pooling, probe pair hybridization, and fluorescent ratio analysis solves the dual problems of parallel multiple sample analysis, and parallel multiplex SNP genotyping for association study. Multiple DNA samples are immobilized on a slide and a single hybridization is performed with a pool of allele-specific oligonucleotide probes. The results of this study show that hybridization of microarray from pooled DNA samples can accurately obtain estimates of absolute allele frequencies in a sample pool. This method can also be used to identify differences in allele frequencies in distinct populations. It is amenable to automation and is suitable for immediate utilization for high-throughput genotyping of SNP.     

A novel method for preparing single-stranded DNA for pyrosequencing

Pyrosequencing technology is a powerful genotyping tool that requires the generation of single stranded DNA. Currently, two simple, solid-phase-based methods are available for this, but they require special equipment, they are not automated, and they are relatively expensive because of the need for biotinylated polymerase chain reaction primers. In this article, an enzymatic liquid-phase method for the generation of high-quality, single-stranded DNA, and its novel use for Pyrosequencing are described. The method has also been fully automated.     

Detection of total DNA with single-stranded DNA binding protein conjugates

We have developed a rapid and sensitive method for total DNA measurement using single-stranded DNA binding protein from E coli conjugated with horseradish peroxidase or urease. To detect DNA, the sample is heated or alkali treated to denature the DNA and then filtered through nylon or nitrocellulose membranes. After the single-stranded DNA is bound to the membrane, single-stranded DNA binding protein enzyme-conjugate is incubated with the membrane. Next, the unbound conjugate is washed off the membrane and the bound conjugate detected colorimetrically. The assay can detect 10 pg of DNA in less than 3 hr. This method can be applied to the detection of DNA contamination in therapeutic proteins produced by recombinant DNA or hybridoma techniques.     

一种快速、无损大豆种子DNA提取方法的建立和应用

基因分型是进行植物基因功能的遗传分析和分子标记辅助育种的重要环节。该研究以大豆(Glycine max)成熟种子为材料, 建立了通过钻孔采集样品、快速提取DNA进行基因型鉴定的方法。用此方法, 一个熟练的工作人员可以在1个小时内完成120个样品的采集和DNA提取; 同时种子钻孔取样后, 不会对大豆种子的萌发造成影响。利用该方法获得的DNA可满足PCR扩增的要求。实验重复性好, 成功率在98%以上。这种快速且无损的大豆种子基因型鉴定方法可以用于鉴定杂交种子、品种纯度以及遗传分析等研究工作。     

A method for HLA genotyping using the specific cleavage of DNA-rN1-DNA/DNA with RNase HII from Chlamydia pneumoniae

Single nucleotide polymorphisms (SNPs) provide a great opportunity for the study of human disease and bacterial drug resistance. However, many SNP typing techniques require dedicated instruments and high cost. Here, we develop a novel method for SNP genotyping based on specific cleavage properties of RNase HII from Chlamydia pneumoniae (CpRNase HII), termed the "CpRNase HII-based method." CpRNase HII cleaves the DNA-rN(1)-DNA/DNA duplex at the 5'-side of the ribonucleotide (rN(1) = one ribonucleotide). Moreover, the cleavage efficiencies of the perfectly matched DNA-rN(1)-DNA/DNA duplexes are higher than those carrying a mismatched ribonucleotide. DNA-rN(1)-DNA fragments are modified with a fluorophore at the 5'-end and a quencher at the 3'-end to generate molecular beacons (MBs), which hybridize with single-stranded DNA (analyte) to be cleaved by CpRNase HII. As perfectly matched duplexes can be cleaved efficiently and mismatched duplexes cannot, CpRNase HII-catalyzed reactions can differentiate between one-nucleotide variations on the DNA-rN(1)-DNA/DNA duplexes. We have validated this method with nine SNPs of the HLA gene, which were successfully determined by endpoint measurements of fluorescence intensity. The new method is simple and effective, because the design of MBs is easy, and all steps of the genotyping consist of simple additions of solutions and incubation. This method will be suitable for large-scale genotyping.     

Pyrosequencing protocol using a universal biotinylated primer for mutation detection and SNP genotyping

DNA sequencing has markedly changed the nature of biomedical research, identifying millions of polymorphisms along the human genome that now require further analysis to study the genetic basis of human diseases. Among the DNA-sequencing platforms available, Pyrosequencing has become a useful tool for medium-throughput single nucleotide polymorphism (SNP) genotyping, mutation detection, copy-number studies and DNA methylation analysis. Its 96-well genotyping format allows reliable results to be obtained at reasonable costs in a few minutes. However, a specific biotinylated primer is usually required for each SNP under study to allow the capture of single-stranded DNA template for the Pyrosequencing assay. Here, we present an alternative to the standard labeling of PCR products for analysis by Pyrosequencing that circumvents the requirement of specific biotinylated primers for each SNP of interest. This protocol uses a single biotinylated primer that is simultaneously incorporated into all M13-tagged PCR products during the amplification reaction. The protocol covers all steps from the PCR amplification and capture of single-stranded template, its preparation, and the Pyrosequencing assay itself. Once the correct primer stoichiometry has been determined, the assay takes around 2 h for PCR amplification, followed by 15-20 min (per plate) to obtain the genotypes.     

Validation of a mobile phone-assisted microarray decoding platform for signal-enhanced mutation detection

We have established a mobile phone-assisted microarray decoding platform for signal-enhanced mutation detection. A large amount of single-stranded DNA (ssDNA) was obtained by combining symmetric PCR and magnetic isolation, and ssDNA prepared with magnetic bead as label was further allowed to hybridize against the tag-array for decoding purpose. High sensitivity and specificity was achieved with the detection of genomic DNA. When simultaneously genotyping nine common mutations associated with hereditary hearing loss, the detection limit of 1 ng genomic DNA was achieved. Significantly, a mobile phone was also used to record and decode the genotyping results through a custom-designed imaging adaptor and a dedicated mobile phone software. A total of 51 buccal swabs from patients probably with deafness-related mutations were collected and analyzed. The genotyping results were all confirmed by fluorescence-based laser confocal scanning and direct DNA sequencing. This mobile phone-assisted decoding platform provides an effective but economic mutation detection alternative for the future quicker and sensitive detection of virtually any mutation-related diseases in developing and underdeveloped countries.     

Fluorometric quantitation of single-stranded DNA: a method applicable to the technique of alkaline elution

The use of Hoechst dye 33258 for the fluorometric quantitation of single-stranded DNA was investigated for the purpose of developing a simple nonradiometric method of quantitating DNA in fractions collected during the analysis of DNA damage by the method of alkaline elution. The sensitivity of the assay allowed amounts of single-stranded DNA as small as 100 ng to be quantitated reliably. The requirement of a near-neutral pH necessitated that alkaline samples be buffered in order to perform DNA quantitation. However, that the addition of a predetermined volume of buffered dye solution to each sample is the only manipulation required prior to fluorescence measurement makes this procedure the simplest yet described for quantitating DNA collected during alkaline elution.     

Real-time genotyping with oligonucleotide probes containing locked nucleic acids

Oligonucleotide probes containing locked nucleic acid (LNA) hybridize to complementary single-stranded target DNA sequences with an increased affinity compared to oligonucleotide DNA probes. As a consequence of the incorporation of LNA residues into the oligonucleotide sequence, the melting temperature of the oligonucleotide increases considerably, thus allowing the successful use of shorter LNA probes as allele-specific tools in genotyping assays. In this article, we report the use of probes containing LNA residues for the development of qualitative fluorescent multiplex assays for the detection of single nucleotide polymorphisms (SNPs) in real-time polymerase chain reaction using the 5'-nuclease detection assay. We developed two applications that show the improved specificity of LNA probes in assays for allelic discrimination. The first application is a four-color 5'-nuclease assay for the detection of SNPs for two of the most common genetic factors involved in thrombotic risk, factor V Leiden and prothrombin G20210A. The second application is a two-color assay for the specific detection of the A-to-T tranversion in codon 6 of the beta-globin gene, responsible for sickle cell anemia. Both real-time genotyping assays were evaluated by comparing the performance of our method to that of a reference method and in both cases, we found a 100% concordance. This approach will be useful for research and molecular diagnostic laboratories in situations in which the specificity provided by oligonucleotide DNA probes is insufficient to discriminate between two DNA sequences that differ by only one nucleotide.     

Microfluidic devices for DNA analysis.

Microfabricated electrophoresis devices allow us to perform short-tandem-repeat genotyping assays in under 2 min and sequence single-stranded DNA in under 15 min. This is 10-100 times faster than standard slab-gel and capillary systems. The microdevice format is the natural extension of 100 years of gradual improvements to electrophoresis but operates in an almost-perfect way, limited only by the sieving medium.     

Single nucleotide polymorphism genotyping by mini-primer allele-specific amplification with universal reporter primers for identification of degraded DNA

Single nucleotide polymorphism (SNP) is informative for human identification, and much shorter regions are targeted in analysis of biallelic SNP compared with highly polymorphic short tandem repeat (STR). Therefore, SNP genotyping is expected to be more sensitive than STR genotyping of degraded human DNA. To achieve simple, economical, and sensitive SNP genotyping for identification of degraded human DNA, we developed 18 loci for a SNP genotyping technique based on the mini-primer allele-specific amplification (ASA) combined with universal reporter primers (URP). The URP/ASA-based genotyping consisted of two amplifications followed by detection using capillary electrophoresis. The sizes of the target genome fragments ranged from 40 to 67 bp in length. In the Japanese population, the frequencies of minor alleles of 18 SNPs ranged from 0.36 to 0.50, and these SNPs are informative for identification. The success rate of SNP genotyping was much higher than that of STR genotyping of artificially degraded DNA. Moreover, we applied this genotyping method to case samples and showed successful SNP genotyping of severely degraded DNA from a 4-year buffered formalin-fixed tissue sample for human identification.     

A novel procedure for efficient genotyping of single nucleotide polymorphisms

Due to the surge in interest in using single nucleotide polymorphisms (SNPs) for genotyping a facile and affordable method for this is an absolute necessity. Here we introduce a procedure that combines an easily automatable single tube sample preparation with an efficient high throughput mass spectrometric analysis technique. Known point mutations or single nucleotide polymorphisms are easily analysed by this procedure. It starts with PCR amplification of a short stretch of genomic DNA, for example an exon of a gene containing a SNP. By shrimp alkaline phosphatase digest residual dNTPs are destroyed. Allele-specific products are generated using a special primer, a conditioned set of α-S-dNTPs and α-S-ddNTPs and a fresh DNA polymerase in a primer extension reaction. Unmodified DNA is removed by 5′-phosphodiesterase digestion and the modified products are alkylated to increase the detection sensitivity in the mass spectrometric analysis. All steps of the preparation are simple additions of solutions and incubations. The procedure operates at the lowest practical sample volumes and in contrast to other genotyping protocols with mass spectrometric detection requires no purification. This reduces the cost and makes it easy to implement. Here it is demonstrated in a version using positive ion detection on described mutations in exon 17 of the amyloid precursor protein gene and in a version using negative ion detection on three SNPs of the granulocyte-macrophage colony stimulating factor gene. Preparation and analysis of SNPs is shown separately and simultaneously, thus demonstrating the multiplexibility of this genotyping procedure. The preparation protocol for genotyping is adapted to the conditions used for the SNP discovery method by denaturing HPLC, thus demonstrating a facile link between protocols for SNP discovery and SNP genotyping. Results corresponded unanimously with the control sequencing. The procedure is useful for high throughput genotyping as it is required for gene identification and pharmacogenomics where large numbers of DNA samples have to be analysed. We have named this procedure the ‘GOOD Assay’ for SNP analysis.     

Efficient production of single-stranded DNA as long as 2 kb for sequencing of PCR-amplified DNA.

A modification of the asymmetric PCR method is described, which reliably facilitates sequencing of PCR-amplified DNA. This procedure produces single-stranded DNA fragments as long as two kilobases that are suitable for dideoxy DNA sequencing. First, a PCR for double-stranded DNA is preformed under optimal conditions (double-stranded PCR). Then, a 5-10-microliters fraction of the double-stranded PCR and a single primer are used to generate single-stranded DNA in a separate PCR (single-stranded PCR). The concentration of the single primer are used to generate single-stranded DNA in a separate PCR (single-stranded PCR). The concentration of the single primer is approximately 0.4 microM. Usually 15 to 25 cycles of single-stranded PCR are optimal to produce single-stranded DNA for four to eight sequencing reactions. The single-stranded DNA is purified by centrifugal ultrafiltration and used directly in dideoxy sequencing. This method was employed to produce high-quality single-stranded DNA templates from a variety of organisms for efficient DNA sequencing of PCR-amplified DNA.     

Major histocompatibility complex class II polymorphisms in Macaca mulatta: factors influencing comprehensive genotyping of Macaca mulatta (Mamu)-DQA1 alleles by PCR-RFLP in archival samples.

In the last 5 years, HLA class II genotyping methods have been adapted for genotyping of class II loci in rhesus macaques. Since previously published typing protocols were used on samples that were collected and stored under ideal conditions, it was of interest to determine if these methods were adequate for genotyping a large collection of archival samples from which DNA had been isolated and stored under various conditions. Established macaque DQA1 typing protocols were modified to optimize the typing procedure and enhance the ability to successfully genotype DNA from samples that were of poor quality and/or quantity. Long-term storage of whole-blood buffy coats or stored DNA extracted from whole-blood buffy coats did not affect typing success; however, amplification and typing of DNA extracted from archival samples of plasma were difficult and resulted in a low success rate. This suggests that amplification and DQA1-genotyping of archival samples is possible with a modified protocol, but is influenced by the age and source of the sample, and to a lesser extent, the method used to extract DNA from sample substrates.     

Allelic discrimination by denaturing high-performance liquid chromatography

Ion-pair reversed-phase high-performance liquid chromatography on alkylated non-porous poly(styrene–divinylbenzene) particles allows the resolution of single-stranded DNA molecules of identical size (<100 nucleotides) that differ in a single base. Allelic discrimination is obtained by injecting short DNA amplicons containing the genetic variants of interest into an adequately preheated mobile phase that results in the instantaneous complete denaturation of the PCR products. All possible transitions and transversions other than C→G can be typed accurately. The method complements the discovery of single-nucleotide polymorphisms by means of HPLC based heteroduplex detection under partially denaturing conditions and allows their rapid genotyping without the need of adding a reference chromosome.     

A test of the efficacy of whole‐genome amplification on DNA obtained from low‐yield samples

Conservation and population genetic studies are sometimes hampered by insufficient quantities of high quality DNA. One potential way to overcome this problem is through the use of whole genome amplification (WGA) kits. We performed rolling circle WGA on DNA obtained from matched hair and tissue samples of North American red squirrels (Tamiasciurus hudsonicus). Following polymerase chain reaction (PCR) at four microsatellite loci, we compared genotyping success for DNA from different source tissues, both pre‐ and post‐WGA. Genotypes obtained with tissue were robust, whether or not DNA had been subjected to WGA. DNA extracted from hair produced results that were largely concordant with matched tissue samples, although amplification success was reduced and some allelic dropout was observed. WGA of hair samples resulted in a low genotyping success rate and an unacceptably high rate of allelic dropout and genotyping error. The problem was not rectified by conducting PCR of WGA hair samples in triplicate. Therefore, we conclude that WGA is only an effective method of enhancing template DNA quantity when the initial sample is from high‐yield material.     

Toward pyrosequencing on surface-attached genetic material by use of DNA-binding luciferase fusion proteins

Mutation detection and single-nucleotide polymorphism genotyping require screening of large samples of materials and therefore the importance of high-throughput DNA analysis techniques is significant. Pyrosequencing is a four-enzyme bioluminometric DNA sequencing technology based on the sequencing-by-synthesis principle. Currently, the technique is limited to simultaneous analysis of 96 or 384 samples. Earlier, attempts to increase the sample capacity were made using micromachined filter chamber arrays where parallel analyses of nanoliter samples could be monitored in real time. We have developed a strategy for specific immobilization of the light-producing enzyme luciferase to the DNA template within a reaction chamber. By this approach, luciferase is genetically fused to a DNA-binding protein (Klenow polymerase or Escherichia coli single-stranded DNA-binding (SSB) protein) and to a purification handle (Z(basic)). The proteins are produced in E. coli and purified using cation and anion exchange chromatography with removal of Z(basic). The produced proteins have been analyzed using an assay for complete primer extension of DNA templates immobilized on magnetic beads detected by pyrosequencing chemistry. Results from these experiments show that the proteins bind selectively to the immobilized DNA and that their enzymatic domains were active. Z(basic)-SSB-luciferase produced the highest signal in this assay and was further exploited as enzymatic reagent for DNA sequencing.     

Preparation of single-stranded DNA from PCR products with streptavidin magnetic beads

The preparation of single-stranded DNA from double-stranded PCR products is an essential step in the identification of aptamers by Systematic Evolution of Ligands by EXponential enrichment (SELEX). The most widely used method for producing single-stranded DNA is alkaline denaturation of biotinylated PCR products attached to streptavidin-coated magnetic beads. Recently, it has been suggested that this method may be unsuitable due to the release of interfering amounts of streptavidin and biotinylated DNA. In this article, the alkaline method is compared with a thermal method that is known to release significant amounts of streptavidin and biotinylated DNA. Results show that trace amounts of streptavidin and biotinylated DNA are released in the alkaline method, but this can be curtailed by preconditioning the beads in aqueous sodium hydroxide. The main product in the alkaline method is single-stranded DNA, which is produced in high yield.     

DNA sampling from eggshell swabbing is widely applicable in wild bird populations as demonstrated in 23 species

There is increasing interest in noninvasive DNA sampling techniques. In birds, there are several methods proposed for sampling DNA, and of these, the use of eggshell swabbing is potentially applicable to a wide range of species. We estimated the effectiveness of this method in the wild by sampling the eggs of 23 bird species. Sampling of eggs was performed twice per nest, soon after the clutch was laid and again at the end of egg incubation. We genotyped DNA samples using a set of five conserved microsatellite markers, which included a Z-linked locus and a sex-typing marker. We successfully collected avian DNA from the eggs of all species tested and from 88.48% of the samples. In most of the cases, the DNA concentration was low (ca. 10 ng/μL). The number of microsatellite loci amplified per sample (0-5) was used as a measure of the genotyping success of the sample. On average, we genotyped 3.01 ± 0.12 loci per sample (mean ± SE), and time of sampling did not seem to have an effect; however, genotyping success differed among species and was greater in those species that used feather material for lining their nest cups. We also checked for the occurrence of possible genotyping errors derived from using samples with very low DNA quantities (i.e. allelic dropout or false alleles) and for DNA contamination from individuals other than the mother, which appeared at a moderate rate (in 44% of the PCR replicates and in 17.36% of samples, respectively). Additionally, we investigated whether the DNA on eggshells corresponded to maternal DNA by comparing the genotypes obtained from the eggshells to those obtained from blood samples of all the nestlings for six nests of magpies. In five of the six magpie nests, we found evidence that the swab genotypes were a mixture of genotypes from both parents and this finding was independent of the time of incubation. Thus, our results broadly confirm that the swabbing of eggshells can be used as a noninvasive method for obtaining DNA and is applicable across a wide range of bird species. Nonetheless, genotyping errors should be properly estimated for each species by using a suite of highly polymorphic loci. These errors may be resolved by sampling only recently laid eggs (to avoid non-maternal DNA contamination) or by performing several PCR replicates per sample (to avoid allelic dropout and false alleles) and/or by increasing the amount of DNA used in the PCR through increasing the volume of the PCR or increasing the concentration of template DNA.     

Quantifying DNA-protein interactions by double-stranded DNA arrays.

We have created double-stranded oligonucleotide arrays to perform highly parallel investigations of DNA-protein interactions. Arrays of single-stranded DNA oligonucleotides, synthesized by a combination of photolithography and solid-state chemistry, have been used for a variety of applications, including large-scale mRNA expression monitoring, genotyping, and sequence-variation analysis. We converted a single-stranded to a double-stranded array by synthesizing a constant sequence at every position on an array and then annealing and enzymatically extending a complementary primer. The efficiency of second-strand synthesis was demonstrated by incorporation of fluorescently labeled dNTPs (2'-deoxyribonucleoside 5'-triphosphates) and by terminal transferase addition of a fluorescently labeled ddNTP. The accuracy of second-strand synthesis was demonstrated by digestion of the arrayed double-stranded DNA (dsDNA) on the array with sequence-specific restriction enzymes. We showed dam methylation of dsDNA arrays by digestion with DpnI, which cleaves when its recognition site is methylated. This digestion demonstrated that the dsDNA arrays can be further biochemically modified and that the DNA is accessible for interaction with DNA-binding proteins. This dsDNA array approach could be extended to explore the spectrum of sequence-specific protein binding sites in genomes.