Mixotrophic cultivation of <Emphasis Type="Italic">Chlorococcum</Emphasis> sp. under non-controlled conditions using a digestate from pig manure within a biorefinery

A number of business opportunities may arise from microalgae and wastewater treatment becoming an integrated system, as biofuels and high-added value products could be obtained simultaneously. This study, performed under controlled and non-controlled conditions, aimed at cultivating Chlorococcum sp. using a digestate from pig manure as culture medium and assessing its growth and biochemical composition for further applications. Under controlled conditions, cultures of Chlorococcum sp. were established testing various digestate dilutions (v/v). It was found that all tested dilutions (up to 8% v/v) promoted a higher biomass density, compared to the control culture in modified Bold’s Basal Medium (modified BBM). Under non-controlled conditions, it was found that the biomass productivity using the digestate diluted 5.6% v/v (23.4 mg L^?1 day^?1) was statistically similar to the one obtained using modified BBM (26.4 mg L^?1 day^?1). The volatile fatty acids contained in the digestate might have allowed mixotrophic growth for Chlorococcum sp. The intracellular lipid content in Chlorococcum sp. remained constant throughout the experiments in both, treatment and control cultures, while carbohydrates increased from 20 to 45% of the cell dry weight in the treatment and from 20 to 42% in the control one. It was concluded that conditions of nitrogen starvation and fluctuating irradiance and temperature benefit carbohydrate accumulation in this strain, since intracellular carbohydrate content increased nearly two-fold during this period. Additionally, the obtained biomass has the potential to be used as feedstock for bioethanol production. This system can meet the concept of a microalgae-based biorefinery, in which biofuels and high-added value products are produced from microalgae and wastewater.     

Attached culture of Nannochloropsis oculata for lipid production

The influences of urea, nitrate and glycine with four concentration levels on attached culture of Nannochloropsis oculata were investigated. The organic nitrogen source glycine was effective on improving not only adhesion biomass productivity but also adhesion rate. The maximum adhesion biomass productivity of 15.76 ± 0.52 g m^?2 day^?1 with adhesion rate of 76.67 ± 0.42 % was achieved with 18 mM glycine. To increase the lipid production, three lipid enhancing strategies were conducted afterwards, including nitrogen starvation, high light, and the combination of nitrogen starvation and high light. In nitrogen starvation situation, although the lipid content was greatly increased, the adhesion biomass productivity dropped probably due to the low cell viability. Increasing light intensity was effective on enhancing both adhesion biomass productivity and lipid content. The results indicated that nitrogen starvation was effective on improving both lipid content and adhesion rate when high light was applied. The maximum lipid yield of 4.32 ± 0.14 g m^?2 day^?1 with adhesion biomass productivity of 21.32 ± 0.65 g m^?2 day^?1, adhesion rate of 86.81 ± 0.10 % and lipid content of 20.24 ± 0.06 % was achieved with the combination strategy.     

Evaluation of antioxidant capacities of green microalgae

Three strains of green microalgae, Chlorococcum sp.C53, Chlorella sp. E53, and Chlorella sp.ED53 were studied for their antioxidant activities. Crude extracts of these microalgae in hot water and in ethanol were examined for their total phenolic contents and for their antioxidant capacities. In order to determine their phenolic contents, the Folin–Ciocalteu method was used. As for the determination of their antioxidant capacities, four different assays were used: (1) total antioxidant capacity determination; (2) DPPH radical scavenging assay; (3) ferrous ion chelating ability assay; and (4) inhibition of lipid peroxidation (using thiobarbituric acid reactive substance). For all the strains we have studied, their ethanolic extract showed more antioxidant activities than their hot water extract. Categorically, the ethanolic extract of Chlorella sp.E53 exhibited both the highest total phenolic content of 35.5?±?0.14 mg gallic acid equivalent (GAE) g^?1 dry weight and the highest DPPH radical scavenging of 68.18?±?0.38 % at 1.4 mg mL^?1 (IC₅₀ 0.81 mg mL^?1), whereas Chlorella sp.ED53 showed both the highest ferrous ion chelation activity of 42.78?±?1.48 % at 1 mg mL^?1 (IC₅₀ 1.23 mg mL^?1) and the highest inhibition of lipid peroxidation of 87.96?±?0.59 % at 4 mg mL^?1. This high level of inhibition is comparable to 94.42?±?1.39 % of butylated hydroxytoluene, a commercial synthetic antioxidant, at the same concentration.     

Altered redox status in Escherichia coli cells enhances pyruvate production in pH-adjusting culture with a fermenter

Improvements in pyruvate production process were examined using Escherichia coli BW25113?pta/pHfdh strain carrying the formate dehydrogenase gene of Mycobacterium vaccae to change the redox status of the cells. Glucose and formate concentrations, and oxygenation levels determined previously in a shake-flask culture were applied for pyruvate production in a 1 l fermenter. However, pyruvate was not produced under the examined conditions. Detailed pH measurements during the fermenter culture using CaCO₃ revealed that maintaining the pH value around 6.0 plays an important role in stabilizing the pyruvate accumulation. In the pH-adjusting culture around 6.0 with NaOH solution, the concentration and yield of pyruvate were 8.96 g l^?1 and 0.48 g pyruvate g glucose^?1, respectively, which were significantly higher than the values reported in the shake-flask culture (6.79 g l^?1 and 0.32 g pyruvate g glucose^?1).     

Growing microalgae as aquaculture feeds on twin-layers: a novel solid-state photobioreactor

Four strains of marine microalgae commonly used as live feeds in hatcheries (Isochrysis sp. T.ISO, Tetraselmis suecica, Phaeodactylum tricornutum, Nannochloropsis sp.) were grown in a novel solid-state photobioreactor, the twin-layer system. Microalgae were immobilized by self adhesion to vertically oriented twin-layer modules which consisted of two different types of ultrathin layers, a macroporous source layer (glass fiber nonwoven) through which the culture medium was transported by gravity flow, and a microporous substrate layer (plain printing paper) which carried the algae on both surfaces of the source layer. This simple open cultivation system effectively separated the immobilized microalgae from the bulk of the growth medium and permitted prolonged cultivation of microalgae with average biomass yields of 10–15 g dry weight m^?2 growth area after 14–25 days of cultivation. Algal biomass was harvested as fresh weight (with 72–84 % water content) without the need to pre-concentrate algae. No aeration or external CO₂ supply was necessary, and due to the microporous substrate layer, no eukaryotic contaminations were observed during the experiment. All experiments were conducted in Germany under greenhouse conditions with natural sunlight. Small-scale growth experiments performed under the same conditions revealed that growth over most of the experimental period (24 days) was linear in all tested algae with growth rates (dry weight per square meter growth area) determined to be 0.6 g ?m^?2?day^?1 (Isochrysis), 0.8 g? m^?2?day^?1 (Nannochloropsis), 1.5 g ?m^?2?day^?1 (Tetraselmis), and 1.8 g? m^?2?day^?1 (Phaeodactylum). Due to its cost-effective construction and with further optimisation of design and productivity at technical scales, the twin-layer system may provide an attractive alternative to methods traditionally used to cultivate live microalgae.     

Development of a Polygonum minus cell suspension culture system and analysis of secondary metabolites enhanced by elicitation

Polygonum minus has been reported to contain valuable metabolites and to date, there is no report on using cell culture technique for metabolite production in P. minus. Naphthalene acetic acid (NAA) concentrations in the range of 2–6 mg L^?1 were used in a matrix of combinations with dichlorophenoxyacetic acid (2,4-D) concentrations in the range of 2–10 mg L^?1 as plant growth regulators (PGRs) to induce callus cultures. Media that were supplemented with 2 mg L^?1 2,4-D + 4 mg L^?1 NAA, 2 mg L^?1 2,4-D + 6 mg L^?1 NAA and 6 mg L^?1 2,4-D + 8 mg L^?1 NAA were effective for callus induction (93.3 % of the explants produced callus). To establish cell culture, the best growth was obtained from medium that was supplemented with 1 mg L^?1 2,4-D + 2 mg L^?1 NAA. From a 1-g inoculum size, the fresh weight increases exponentially after 5–10 days of culture, and a 26.71 g maximum fresh weight was obtained after 25 days of culture. The cell culture medium was then analyzed using gas chromatography–mass spectrometry (GC–MS). Jasmonic acid (100, 50, 25 and 5 μM), salicylic acid (100, 50, 25 and 5 μM), yeast extract (500, 250 and 100 mg L^?1) and glass beads were used in this research as elicitors. The cell cultures were then incubated with the different elicitors for 1, 2, 3 and 4 days. Several compounds with high peak area percentages were detected, including 2-furancarboxaldehyde, 5-hydroxymethyl, furfural, and 2-cyclopenten-1-one, 2-hydroxy. These results show the diversity of metabolites released by P. minus cell into the culture medium under control conditions.     

Comparison of growth of Tetraselmis in a tubular photobioreactor (Biocoil) and a raceway pond

Microalgae cultivation systems can be divided broadly into open ponds and closed photobioreactors. This study investigated the growth and biomass productivity of the halophilic green alga Tetraselmis sp. MUR-233, grown outdoors in paddle wheel-driven open raceway ponds and in a tubular closed photobioreactor (Biocoil) at a salinity of 7 % NaCl (w/v) between mid-March and June 2010 (austral autumn/winter). Volumetric productivity in the Biocoil averaged 67 mg ash-free dry weight (AFDW) L^?1 day^?1 when the culture was grown without CO₂ addition. This productivity was 86 % greater, although less stable, than that achieved in the open raceway pond (36 mg L^?1 day^?1) grown at the same time in the autumn period. The Tetraselmis culture in the open raceway pond could be maintained in semi-continuous culture for the whole experimental period of 3 months without an additional CO₂ supply, whereas in the Biocoil, under the same conditions, reliable semi-continuous culture was only achievable for a period of 38 days. However, stable semi-continuous culture was achieved in the Biocoil by the addition of CO₂ at a controlled pH of ~7.5. With CO₂ addition, the volumetric biomass productivity in the Biocoil was 85 mg AFDW L^?1 day^?1 which was 5.5 times higher than the productivity achieved in the open raceway pond (15 mg AFDW L^?1 day^?1) with CO₂ addition and 8 times higher compared to the productivity in the open raceway pond without CO₂ addition (11 mg AFDW L^?1 day^?1), when cultures were grown in winter. The illuminated area productivities highlight an alternative story and showed that the open raceway pond had a three times higher productivity (3,000 mg AFDW m^?2 day^?1) compared to the Biocoil (850 mg AFDW m^?2 day^?1). Although significant differences were found between treatments and cultivation systems, the overall average lipid content for Tetraselmis sp. MUR-233 was 50 % in exponential phase during semi-continuous cultivation.     

Comparison of biomass production and total lipid content of freshwater green microalgae cultivated under various culture conditions

The growth and total lipid content of four green microalgae (Chlorella sp., Chlorella vulgaris CCAP211/11B, Botryococcus braunii FC124 and Scenedesmus obliquus R8) were investigated under different culture conditions. Among the various carbon sources tested, glucose produced the largest biomass or microalgae grown heterotrophically. It was found that 1 % (w/v) glucose was actively utilized by Chlorella sp., C. vulgaris CCAP211/11B and B. braunii FC124, whereas S. obliquus R8 preferred 2 % (w/v) glucose. No significant difference in biomass production was noted between heterotrophic and mixotrophic (heterotrophic with light illumination/exposure) growth conditions, however, less production was observed for autotrophic cultivation. Total lipid content in cells increased by approximately two-fold under mixotrophic cultivation with respect to heterotrophic and autotrophic cultivation. In addition, light intensity had an impact on microalgal growth and total lipid content. The highest total lipid content was observed at 100 μmol m^?2s^?1 for Chlorella sp. (22.5 %) and S. obliquus R8 (23.7 %) and 80 μmol m^?2s^?1 for C. vulgaris CCAP211/11B (20.1 %) and B. braunii FC124 (34.9 %).     

Monoxenic liquid culture with Escherichia coli of the free-living nematode Panagrolaimus sp. (strain NFS 24-5), a potential live food candidate for marine fish and shrimp larvae

The free-living, bacterial-feeding nematode Panagrolaimus sp. (strain NFS 24-5) has potential for use as live food for marine shrimp and fish larvae. Mass production in liquid culture is a prerequisite for its commercial exploitation. Panagrolaimus sp. was propagated in monoxenic liquid culture on Escherichia coli and parameters, like nematode density, population dynamics and biomass were recorded and compared with life history table data. A mean maximum nematode density of 174,278 mL^?1 and a maximum of 251,000 mL^?1 were recorded on day 17 after inoculation. Highest average biomass was 40 g L^?1 at day 13. The comparison with life history table data indicated that the hypothetical potential of liquid culture is much higher than documented during this investigation. Nematode development is delayed in liquid culture and egg production per female is more than five times lower than reported from life history trait analysis. The latter assessed a nematode generation time of 7.1 days, whereas the process time at maximum nematode density in liquid culture was 16 days indicating that a reduction of the process time can be achieved by further investigating the influence of nematode inoculum density on population development. The results challenge future research to reduce process time and variability and improve population dynamics also during scale-up of the liquid culture process.     

Effect of culture conditions, cytokinins, methyl jasmonate and salicylic acid on the biomass accumulation and production of withanolides in multiple shoot culture of Withania somnifera (L.) Dunal using liquid culture

The influence of cytokinins and culture conditions including medium volume, harvest time and elicitation with abiotic elicitors (SA/MeJ) have been studied for the optimal production of biomass and withanolides in the multiple shoot culture of Withania somnifera. Elicitation of shoot inoculum mass (2 g l^?l FW) with SA at 100 μM in the presence of 0.6 mg l^?l BA and 20 mg l^?l spermidine for 4 h exposure time at the 4th week in 20 ml liquid medium recorded higher withanolides production (withanolides A [8.48 mg g^?l DW], withanolides B [15.47 mg g^?l DW], withaferin A [29.55 mg g^?l DW] and withanone [23.44 mg g^?l DW]), which were 1.14 to 1.18-fold higher than elicitation with MeJ at 100 μM after 5 weeks of culture. SA-elicited cultures did not exhibit much variation in biomass accumulation when compared to control. This cytokinin induces and SA-elicited multiple shoot culture protocol provides a potential alternative for the optimal production of biomass and withanolides utilizing liquid culture.     

Photosynthetic characteristics of female vegetative tissues of Porphyra katadai var. hemiphylla (Bangiales, Rhodophyta) in culture

In this study, chlorophyll fluorescence parameters (?F/F _m′, F _v/F _m) and oxygen evolution of female vegetative tissues of Porphyra katadai var. hemiphylla in unisexual culture (FV) and in mixed culture with male vegetative tissues (FV-M) were followed at 5–20 °C, 10 and 80 μmol photons m^?2 s^?1. The formation of reproductive tissues was closely correlated with decreasing photosynthetic activities. At the same temperature the tissues cultured under 80 μmol photons m^?2 s^?1 showed a greater extent of maturation than those under 10 μmol photons m^?2 s^?1, and their decrease in photosynthesis was also larger. Under the same light intensity the extent of maturation increased with increasing temperature, and both cultures showed higher values of ?F/F _m′ and F _v/F _m at 10 and 15 °C, while their oxygen evolution became negative at 15–20 °C during the later period. Under the same culture condition the maturation of FV-M culture was relatively faster than that of FV culture, while their photosynthetic activity, especially ?F/F _m′, was lower.     

Optimization and quality assessment of adventitious roots culture in Panax quinquefolium L.

In this study, adventitious roots of Panax quinquefolium L. have been successfully established. The highest induction rate of roots was obtained in MS medium containing 3 mg L^?1 IBA after 4 weeks of culture. The culture conditions of adventitious root were optimized and evaluated with response surface methodology. The best culture conditions for root growth seemed to be 0.75 salt strength MS medium, 4.70 g L^?1 inoculum size and 40 days of culture. The active component contents of adventitious roots were compared with those of native roots. The total saponins content was found to be 16.28 mg g^?1 in native root and 4.64 mg g^?1 in adventitious root. The polysaccharide content of the adventitious root was 1.5 times higher than that in the native P. quinquefolium (30.54 vs. 20.28 mg g^?1).     

Influence of silicate on enrichment of highly productive microalgae from a mixed culture

Microalgae have the potential to supply a biobased society with essential feedstocks like sugar and lipids. Besides being productive, strains used for this purpose should grow fast, be resistant to predators, and have good harvestability properties. Diatoms, a class of siliceous algae, have these and other preferred characteristics. In this paper, we describe the enrichment of microalgae in sequencing batch reactors with and without supply of silicate. Both reactors were operated with a light–dark cycle. To maximize storage compound production, carbon fixation and nitrogen uptake were uncoupled by limiting the availability of nitrate to the dark phase. After ten cycles, a stable culture was established in both reactors. The diatom Nitzschia sp. dominated the silicate-rich reactor, and the green algae Chlamydomonas sp. dominated the silicate-depleted reactor. Over the remaining 27 cycles of the experiment, the microalgal community structure did not change, indicating a highly stable system. Although the dominant microalga was highly dependent on the presence of silicate, the performance of both microalgal enrichments was similar. Polymers of glucose were stored during the nitrogen-limited light period. On organic matter dry weight basis, the sugar content of the biomass increased during the light period from 17?±?4 to 53?±?4 % for the silicate-limited culture, and from 14?±?4 to 43?±?4 % (w w ^?1) for the silicate excess culture. These results show that storage compound production can be achieved under various conditions, as long as a selective environment is maintained.     

Optimization of culture conditions for the direct regeneration of Kappaphycus alvarezii (Rhodophyta,Solieriaceae)

Cultivation of seaweeds on a commercial scale requires a large number of propagules with desirable phenotypic traits which include high growth rates and resistance to diseases. Seaweed micropropagation can be considered as one of the best methods to provide a large amount of seedlings for commercial cultivation. This study was carried out to optimize the parameters known to affect the growth of Kappaphycus alvarezii in vitro and subsequently improve the production of seedlings through micropropagation. Suitability of media, concentration of phytoregulators, types and concentration of fertilizers, culture density, light intensity, interval of aeration activity, salinity, and pH were found to be critical factors for the growth of K. alvarezii. The optimum condition for direct regeneration of K. alvarezii in a culture vessel was found to be cultivation of explants in Provasoli's enriched seawater (PES) media supplemented with 2.5 mg L^?1 6-benzylaminopurine (BAP), 1.0 mg L^?1 indole-3-acetic acid (IAA), and 3.0 mg L^?1 natural seaweed extract (NSE) with culture density of 0.4 %?w/v, under light intensity of 75 μmol photons m^?2 s^?1, continuous aeration of 30.0 L h^?1, salinity of 30.0 ppt, and pH 7.5. An airlift photobioreactor was constructed for the mass propagation of K. alvarezii explants with optimum culture conditions obtained from the study. The optimum growth rates of the K. alvarezii explants in culture vessels (5.5 % day^?1) and photobioreactor (6.5 % day^?1) were found to be higher than the growth rate observed in field trials in the open sea (3.5 % day^?1). The information compiled during the course of this study will be of utility to commercial seaweed cultivators.     

Diesel oil removal by immobilized Pseudoxanthomonas sp. RN402

Pseudoxanthomonas sp. RN402 was capable of degrading diesel, crude oil, n-tetradecane and n-hexadecane. The RN402 cells were immobilized on the surface of high-density polyethylene plastic pellets at a maximum cell density of 10⁸ most probable number (MPN) g^?1 of plastic pellets. The immobilized cells not only showed a higher efficacy of diesel oil removal than free cells but could also degrade higher concentrations of diesel oil. The rate of diesel oil removal by immobilized RN402 cells in liquid culture was 1,050 mg l^?1 day^?1. Moreover, the immobilized cells could maintain high efficacy and viability throughout 70 cycles of bioremedial treatment of diesel-contaminated water. The stability of diesel oil degradation in the immobilized cells resulted from the ability of living RN402 cells to attach to material surfaces by biofilm formation, as was shown by CLSM imaging. These characteristics of the immobilized RN402 cells, including high degradative efficacy, stability and flotation, make them suitable for the purpose of continuous wastewater bioremediation.     

Use of secondary-treated wastewater for the production of Muriellopsis sp.

In this paper, the use of secondary-treated wastewater as the culture medium for the production of Muriellopsis sp. microalgal biomass is analyzed. Using this wastewater, a maximum biomass productivity of 0.5 g?l^?1?day^?1 was measured, it being only 38 % lower than that achieved using the standard culture medium. Due to the low nitrogen content of secondary-treated wastewater, cultures produced in a medium containing a high percentage of it become nitrate-limited, thus the quantum yield reduces by up to 0.38 g?E^?1—this compares to 0.67 g?E^?1 when using a standard culture medium. On the other hand, nitrate limitation enhances the accumulation of lipids and carbohydrates, with values measured at 33 and 66 % dry weight, respectively. It was also demonstrated that secondary-treated wastewater does not have any toxic effect on the growth of Muriellopsis sp. in spite of nitrogen being in the form of ammonium rather than in nitrate. Moreover, the secondary-treated wastewater was depurated when used to produce Muriellopsis sp., with the outlet biological oxygen demand and chemical oxygen demand being lower than at the inlet; the nitrate and phosphate concentrations were zero. Therefore, Muriellopsis sp. production using secondary-treated wastewater allows a reduction in the process cost by decreasing freshwater and fertilizer use, as well as by depurating the water, thus greatly enhancing process sustainability.     

Induction of laccases in Trametes versicolor by aqueous wood extracts

The induction of laccase isoforms in Trametes versicolor HEMIM-9 by aqueous extracts (AE) from softwood and hardwood was studied. Samples of sawdust of Pinus sp., Cedrela sp., and Quercus sp. were boiled in water to obtain AE. Different volumes of each AE were added to fungal cultures to determine the amount of AE needed for the induction experiments. Laccase activity was assayed every 24 h for 15 days. The addition of each AE (50 to 150 μl) to the fungal cultures increased laccase production compared to the control (0.42 ± 0.01 U ml^?1). The highest laccase activities detected were 1.92 ± 0.15 U ml^?1 (pine), 1.87 ± 0.26 U ml^?1 (cedar), and 1.56 ± 0.34 U ml^?1 (oak); laccase productivities were also significantly increased. Larger volumes of any AE inhibited mycelial growth. Electrophoretic analysis revealed two laccase bands (lcc1 and lcc2) for all the treatments. However, when lcc2 was analyzed by isoelectric focusing, inducer-dependent isoform patterns composed of three (pine AE), four (oak AE), and six laccase bands (cedar AE) were observed. Thus, AE from softwood and hardwood had induction effects in T. versicolor HEMIM-9, as indicated by the increase in laccase activity and different isoform patterns. All of the enzymatic extracts were able to decolorize the dye Orange II. Dye decolorization was mainly influenced by pH. The optimum pH for decolorization was pH 5 (85 %), followed by pH 7 (50 %) and pH 3 (15 %). No significant differences in the dye decolorizing capacity were detected between the control and the differentially induced laccase extracts (oak, pine and cedar). This could be due to the catalytic activities of isoforms with pI 5.4 and 5.8, which were detected under all induction conditions.     

Enhancement of electricity production in a mediatorless air–cathode microbial fuel cell using <Emphasis Type="Italic">Klebsiella</Emphasis> sp. IR21

A novel dissimilatory iron-reducing bacteria, Klebsiella sp. IR21, was isolated from the anode biofilm of an MFC reactor. Klebsiella sp. IR21 reduced 27.8 % of ferric iron to ferrous iron demonstrating that Klebsiella sp. IR21 has electron transfer ability. Additionally, Klebsiella sp. IR21 generated electricity forming a biofilm on the anode surface. When a pure culture of Klebsiella sp. IR21 was supplied into a single chamber, air–cathode MFC fed with a mixture of glucose and acetate (500 mg L^?1 COD), 40–60 mV of voltage (17–26 mA m^?2 of current density) was produced. Klebsiella sp. IR21 was also utilized as a biocatalyst to improve the electrical performance of a conventional MFC reactor. A single chamber, air–cathode MFC was fed with reject wastewater (10,000 mg L^?1 COD) from a H₂ fermentation reactor. The average voltage, current density, and power density were 142.9 ± 25.74 mV, 60.5 ± 11.61 mA m^?2, and 8.9 ± 3.65 mW m^?2, respectively, in the MFC without inoculation of Klebsiella sp. IR21. However, these electrical performances of the MFC were significantly increased to 204.7 ± 40.24 mV, 87.5 ± 17.20 mA m^?2, and 18.6 ± 7.23 mW m^?2, respectively, with inoculation of Klebsiella sp. IR21. The results indicate that Klebsiella sp. IR21 can be utilized as a biocatalyst for enhancement of electrical performance in MFC systems.     

Environmental Scanning Electron Microscopy characterization of the adhesion of conidia from <Emphasis Type="Italic">Penicillium expansum</Emphasis> to cedar wood substrata at different pH values

Initial microbial adhesion to surfaces is a complicated process that is affected by a number of factors. An important property of a solution that may influence adhesion is pH. The surface properties of the cedar wood were characterized by the sessile drop technique. Moreover, the interfacial free energy of surface adhesion to the cedar wood was determined under pH values (2, 3, 5, 7, 9 and 11). The results showed that cedar wood examined at different pH levels could be considered hydrophobic ranged from Giwi = ?13.1 mJ/m² to Giwi = ?75 mJ/m². We noted that the electron-donor character of cedar wood was important at both basic and limit acidic conditions (pH 11 and pH 3) and it decreased at intermediate pH (pH 5). The cedar wood substratum presents a weak electron acceptor under various pH’s. In addition, the adhesion of conidia from Penicilllium expansum to the cedar wood surfaces at different pH values (2, 3, 5, 7, 9 and 11) was investigated using Environmental Scanning Electron Microscopy and image analysis was assessed with the Mathlab^® program. The data analysis showed that the conidia from P. expansum were strongly influenced by the pH. The maximum adhesion occurs in the pH 11 and pH 3 and decreased to 24% at pH 5.     

Nickel,manganese and copper removal by a mixed consortium of sulfate reducing bacteria at a high COD/sulfate ratio

The use of sulfate-reducing bacteria (SRB) in passive treatments of acidic effluents containing heavy metals has become an attractive alternative biotechnology. Treatment efficiency may be linked with the effluent conditions (pH and metal concentration) and also to the amount and nature of the organic substrate. Variations on organic substrate and sulfate ratios clearly interfere with the biological removal of this ion by mixed cultures of SRB. This study aimed to cultivate a mixed culture of SRB using different lactate concentrations at pH 7.0 in the presence of Ni, Mn and Cu. The highest sulfate removal efficiency obtained was 98 %, at a COD/sulfate ratio of 2.0. The organic acid analyses indicated an acetate accumulation as a consequence of lactate degradation. Different concentrations of metals were added to the system at neutral pH conditions. Cell proliferation and sulfate consumption in the presence of nickel (4, 20 and 50 mg l^?1), manganese (1.5, 10 and 25 mg l^?1) and copper (1.5, 10 and 25 mg l^?1) were measured. The presence of metals interfered in the sulfate biological removal however the concentration of sulfide produced was high enough to remove over 90 % of the metals in the environment. The molecular characterization of the bacterial consortium based on dsrB gene sequencing indicated the presence of Desulfovibrio desulfuricans, Desulfomonas pigra and Desulfobulbus sp. The results here presented indicate that this SRB culture may be employed for mine effluent bioremediation due to its potential for removing sulfate and metals, simultaneously.