A statistically derived parameterization for the collagen triple-helix

The triple-helix is a unique secondary structural motif found primarily within the collagens. In collagen, it is a homo- or hetero-tripeptide with a repeating primary sequence of (Gly-X-Y)(n), displaying characteristic peptide backbone dihedral angles. Studies of bulk collagen fibrils indicate that the triple-helix must be a highly repetitive secondary structure, with very specific constraints. Primary sequence analysis shows that most collagen molecules are primarily triple-helical; however, no high-resolution structure of any entire protein is yet available. Given the drastic morphological differences in self-assembled collagen structures with subtle changes in assembly conditions, a detailed knowledge of the relative locations of charged and sterically bulky residues in collagen is desirable. Its repetitive primary sequence and highly conserved secondary structure make collagen, and the triple-helix in general, an ideal candidate for a general parameterization for prediction of residue locations and for the use of a helical wheel in the prediction of residue orientation. Herein, a statistical analysis of the currently available high-resolution X-ray crystal structures of model triple-helical peptides is performed to produce an experimentally based parameter set for predicting peptide backbone and C(beta) atom locations for the triple-helix. Unlike existing homology models, this allows easy prediction of an entire triple-helix structure based on all existing high-resolution triple-helix structures, rather than only on a single structure or on idealized parameters. Furthermore, regional differences based on the helical propensity of residues may be readily incorporated. The parameter set is validated in terms of the predicted bond lengths, backbone dihedral angles, and interchain hydrogen bonding.     

Conformation of alloHyp in the Y position in the host-guest peptide with the pro-pro-gly sequence: implication of the destabilization of (Pro-alloHyp-Gly)10

The crystal structure of the host-guest peptide, (Pro-Pro-Gly)4-(Pro-alloHyp-Gly)-(Pro-Pro-Gly)4, was analyzed at high resolution. allohydroxyproline (alloHyp), 4S-hydroxyproline, was successfully characterized through the use of a host-guest peptide, while the previous study indicated the inability of a triple helical formation of (Pro-alloHyp-Gly)10. A detailed analysis of alloHyp conformation in collagen-like models sheds light on the role played by its puckering in the triple-helix stabilization and destabilization. That is, the alloHyp typically adopts down puckering. However, it adopted up puckering in the Y position in the Pro-alloHyp-Gly guest triplet, which was not preferable conformation for alloHyp. Therefore, the energetically unfavorable conformations seemed to play the key role in giving destabilization to the triple helix in (Pro-alloHyp-Gly)10. The intrinsic hydration pattern in (Pro-Pro-Gly)9 was conserved even in the surrounding alloHyp residues.     

Folding and conformational consequences of glycine to alanine replacements at different positions in a collagen model peptide

The collagen model peptide T1-892 includes a C-terminal nucleation domain, (Gly-Pro-Hyp)(4), and an N-terminal (Gly-X-Y)(6) sequence taken from type I collagen. In osteogenesis imperfecta (OI) and other collagen diseases, single base mutations often convert one Gly to a larger residue, and T1-892 homologues modeling such mutations were synthesized with Gly to Ala substitutions in either the (Gly-Pro-Hyp)(4) domain, Gly25Ala, or the (Gly-X-Y)(6) domain, Gly10Ala. CD and NMR studies show the Gly10Ala peptide forms a normal triple-helix at the C-terminal end and propagates from the C- to the N-terminus until the Gly --> Ala substitution is encountered. At this point, triple-helix folding is terminated and cannot be reinitiated, leaving a nonhelical N-terminus. A decreased thermal stability is observed as a result of the shorter length of the triple-helix. In contrast, introduction of the Gly to Ala replacement at position 25, in the nucleation domain, shifts the monomer/trimer equilibrium toward the monomer form. The increased monomer and lower trimer populations are reflected in the dramatic decrease in triple-helix content and stability. Unlike the Ala replacement at position 10, the Ala substitution in the (Gly-Pro-Hyp)(4) region can still be incorporated into a triple-helix, but at a greatly decreased rate of folding, since the original efficient nucleation site is no longer operative. The specific consequences of Gly to Ala replacements in two distinctive sequences in this triple-helical peptide may help clarify the variability in OI clinical severity resulting from mutations at different sites along type I collagen chains.     

Sweet is stable: glycosylation stabilizes collagen

For most collagens, the melting temperature (T(m)) of the triple-helical structure of collagen correlates with the total content of proline (Pro) and 4-trans-hydroxyproline (Hyp) in the Xaa and Yaa positions of the -Gly-Xaa-Yaa- triplet repeat. The cuticle collagen of the deep-sea hydrothermal vent worm Riftia pachyptila, despite a very low content of Pro and Hyp, has a relatively high thermal stability. Rather than Hyp occupying the Yaa position, as is normally found in mammalian collagens, this position is occupied by threonine (Thr) which is O-glycosylated. We compare the triple-helix forming propensities in water of two model peptides, Ac-(Gly-Pro-Thr)(10)-NH(2) and Ac-(Gly-Pro-Thr(Galbeta))(10)-NH(2), and show that a collagen triple-helix structure is only achieved after glycosylation of Thr. Thus, we show for the first time that glycosylation is required for the formation of a stable tertiary structure and that this modification represents an alternative way of stabilizing the collagen triple-helix that is independent of the presence of Hyp.     

Observation of a partially opened triple-helix conformation in 1-->3-beta-glucan by fluorescence resonance energy transfer spectroscopy

This study used fluorescence resonance energy transfer (FRET) spectroscopy as an indirect method to investigate the effect of NaOH treatment on the conformation of a triple-helix (1-->3)-beta-D-glucan and then evaluated the effect of conformation on biological activity. Previous studies have suggested that treatment of the triple-helix glucans with NaOH produces single-helix conformers. FRET spectra of the triple-helix glucan, laminarin, doubly labeled with 1-aminopyrene as donor probe and fluorescein-5-isothiocyanate as acceptor probe attached at the reducing end, showed that a partially opened triple-helix conformer was formed on treatment with NaOH. Increasing degrees of strand opening was associated with increasing concentrations of NaOH. Based on these observations we propose that a partially opened triple-helix rather than a single helix, is formed by treating the triple-helix glucans with NaOH. After neutralizing the NaOH, changes in FRET indicated that the partially opened conformer gradually reverts to the triple-helix over 8 days. Laminarian was stabilized at different degrees of partial opening and its biological activity examined using the Limulus amebocyte lysate assay and nitric oxide production by alveolar macrophage. Both Limulus amebocyte lysate activity and nitric oxide production were related to the degree of opening of the triple-helix. Partially open conformers were more biologically active than the intact triple-helix.     

Electrostatic interactions involving lysine make major contributions to collagen triple-helix stability

Important stabilizing features for the collagen triple helix include the presence of Gly as every third residue, a high content of imino acids, and interchain hydrogen bonds. Host-guest peptides have been used previously to characterize triple-helix propensities of individual residues and Gly-X-Y triplets. Here, comparison of the thermal stabilities of host-guest peptides of the form (Gly-Pro-Hyp)3-Gly-X-Y-Gly-X'-Y'-(Gly-Pro-Hyp)3 extends the study to adjacent tripeptide sequences, to encompass the major classes of potential direct intramolecular interactions. Favorable hydrophobic interactions were observed, as well as stabilizing intrachain interactions between residues of opposite charge in the i and i + 3 positions. However, the greatest gain in triple-helix stability was achieved in the presence of Gly-Pro-Lys-Gly-Asp/Glu-Hyp sequences, leading to a T(m) value equal to that seen for a Gly-Pro-Hyp-Gly-Pro-Hyp sequence. This stabilization is seen for Lys but not for Arg and can be assigned to interchain ion pairs, as shown by molecular modeling. Computational analysis shows that Lys-Gly-Asp/Glu sequences are present at a frequency much greater than expected in collagen, suggesting this interaction is biologically important. These results add significantly to the understanding of which surface ion pairs can contribute to protein stability.     

Peptide investigations of pairwise interactions in the collagen triple-helix

Pairwise interactions have been studied for the major secondary structures in proteins. The present work extends the characterization of interactions between side-chains to the context of a collagen triple-helix. In this study, the most frequent Gly-X-Y tripeptide sequences in collagen are characterized in terms of interchain interactions between non-imino acid X and Y residues, through the use of host-guest peptides and statistical frequency analysis. Stabilities predicted on the basis of additivity show good agreement with experimental values for almost half of the peptides, indicating a lack of interaction. A small number of peptides have a stability lower than predicted, while a larger number are more stable than expected. Of all triplets containing residues of opposite charge, only Gly-Lys-Asp and Gly-Arg-Asp exhibit stabilizing electrostatic interactions, and these pairs are found together preferentially in collagens. Repulsion of like charges is observed in Gly-Arg-Lys, Gly-Lys-Arg, and Gly-Glu-Asp sequences, and a small degree of hydrophobic stabilization was observed for the Gly-Leu-Leu guest triplet. The data reported here help clarify basic principles of triple-helix stability. In addition, the experimentally determined stabilities of the tripeptide units found most frequently in collagens constitute a database useful for predicting triple-helix stability in peptides, collagens and other triple-helix-containing proteins.     

Location of glycine mutations within a bacterial collagen protein affects degree of disruption of triple-helix folding and conformation

The hereditary bone disorder osteogenesis imperfecta is often caused by missense mutations in type I collagen that change one Gly residue to a larger residue and that break the typical (Gly-Xaa-Yaa)(n) sequence pattern. Site-directed mutagenesis in a recombinant bacterial collagen system was used to explore the effects of the Gly mutation position and of the identity of the residue replacing Gly in a homogeneous collagen molecular population. Homotrimeric bacterial collagen proteins with a Gly-to-Arg or Gly-to-Ser replacement formed stable triple-helix molecules with a reproducible 2 °C decrease in stability. All Gly replacements led to a significant delay in triple-helix folding, but a more dramatic delay was observed when the mutation was located near the N terminus of the triple-helix domain. This highly disruptive mutation, close to the globular N-terminal trimerization domain where folding is initiated, is likely to interfere with triple-helix nucleation. A positional effect of mutations was also suggested by trypsin sensitivity for a Gly-to-Arg replacement close to the triple-helix N terminus but not for the same replacement near the center of the molecule. The significant impact of the location of a mutation on triple-helix folding and conformation could relate to the severe consequences of mutations located near the C terminus of type I and type III collagens, where trimerization occurs and triple-helix folding is initiated.     

Stabilization of DNA triple helix using conjugates of oligonucleotides and synthetic ligands

Possibility of stabilization of DNA triple helix is discussed using a covalent conjugation to the third strand (through its terminal phosphate) of ligands that have affinity to double and triple helices. Two types of stabilizers are considered: minor groove binders based on oligopyrroles and triplex-specific interacalators. As a target, a synthetic 29-mer duplex containing a natural polypurinic sequence of the human immunodeficiency provirus was employed. The stabilization with minor groove binders requires several conditions to be respected: a sufficiently long linker capable of reaching out the minor groove from the major one, a specific double-stranded structure of the oligopyrrole fragment and its in-phase fitness to the target sequence. The best stabilizers of a triplex turned out to be novel conjugates in which two parallel molecules containing six pyrrole units each are linked to the same 5'-phosphate of a 16-mer triplex-forming oligonucleotide. The stabilizing properties of these derivatives were comparable with those of benzoindoloquinoline (BIQ) intercalators attached to the terminal phosphate of triple-helix forming oligonucleotides.     

Mechanism of stabilization of a bacterial collagen triple helix in the absence of hydroxyproline

The Streptococcus pyogenes cell-surface protein Scl2 contains a globular N-terminal domain and a collagen-like domain, (Gly-Xaa-X'aa)(79), which forms a triple helix with a thermal stability close to that seen for mammalian collagens. Hyp is a major contributor to triple-helix stability in animal collagens, but is not present in bacteria, which lack prolyl hydroxylase. To explore the basis of bacterial collagen triple-helix stability in the absence of Hyp, biophysical studies were carried out on recombinant Scl2 protein, the isolated collagen-like domain from Scl2, and a set of peptides modeling the Scl2 highly charged repetitive (Gly-Xaa-X'aa)(n) sequences. At pH 7, CD spectroscopy, dynamic light scattering, and differential scanning calorimetry of the Scl2 protein all showed a very sharp thermal transition near 36 degrees C, indicating a highly cooperative unfolding of both the globular and triple-helix domains. The collagen-like domain isolated by trypsin digestion showed a sharp transition at the same temperature, with an enthalpy of 12.5 kJ/mol of tripeptide. At low pH, Scl2 and its isolated collagen-like domain showed substantial destabilization from the neutral pH value, with two thermal transitions at 24 and 27 degrees C. A similar destabilization at low pH was seen for Scl2 charged model peptides, and the degree of destabilization was consistent with the strong pH dependence arising from the GKD tripeptide unit. The Scl2 protein contained twice as much charge as human fibril-forming collagens, and the degree of electrostatic stabilization observed for Scl2 was similar to the contribution Hyp makes to the stability of mammalian collagens. The high enthalpic contribution to the stability of the Scl2 collagenous domain supports the presence of a hydration network in the absence of Hyp.     

Stability junction at a common mutation site in the collagenous domain of the mannose binding lectin

Missense mutations in the collagen triple-helix that replace one of the required Gly residues in the (Gly-Xaa-Yaa)(n)() repeating sequence have been implicated in various disorders. Although most hereditary collagen disorders are rare, a common occurrence of a Gly replacement mutation is found in the collagenous domain of mannose binding lectin (MBL). A Gly --> Asp mutation at position 54 in MBL is found at a frequency as high as 30% in certain populations and leads to increased susceptibility to infections. The structural and energetic consequences of this mutation are investigated by comparing a triple-helical peptide containing the N-terminal Gly-X-Y units of MBL with the homologous peptide containing the Gly to Asp replacement. The mutation leads to a loss of triple-helix content but only a small decrease in the stability of the triple-helix (DeltaT(m) approximately 2 degrees C) and no change in the calorimetric enthalpy. NMR studies on specifically labeled residues indicate the portion of the peptide C-terminal to residue 54 is in a highly ordered triple-helix in both peptides, while residues N-terminal to the mutation site have a weak triple-helical signal in the parent peptide and are completely disordered in the mutant peptide. These results suggest that the N-terminal triplet residues are contributing little to the stability of this peptide, a hypothesis confirmed by the stability and enthalpy of shorter peptides containing only the region C-terminal to the mutation site. The Gly to Asp replacement at position 54 in MBL occurs at the boundary of a highly stable triple-helix region and a very unstable sequence. The junctional position of this mutation minimizes its destabilizing effect, in contrast with the significant destabilization seen for Gly replacements in peptides modeling collagen diseases.     

Triple-helical peptides: an approach to collagen conformation, stability, and self-association

Peptides have been an integral part of the collagen triple-helix structure story, and have continued to serve as useful models for biophysical studies and for establishing biologically important sequence-structure-function relationships. High resolution structures of triple-helical peptides have confirmed the basic Ramachandran triple-helix model and provided new insights into the hydration, hydrogen bonding, and sequence dependent helical parameters in collagen. The dependence of collagen triple-helix stability on the residues in its (Gly-X-Y)(n) repeating sequence has been investigated by measuring melting temperatures of host-guest peptides and an on-line collagen stability calculator is now available. Although the presence of Gly as every third residue is essential for an undistorted structure, interruptions in the repeating (Gly-X-Y)(n) amino acid sequence pattern are found in the triple-helical domains of all nonfibrillar collagens, and are likely to play a role in collagen binding and degradation. Peptide models indicate that small interruptions can be incorporated into a rod-like triple-helix with a highly localized effect, which perturbs hydrogen bonds and places the standard triple-helices on both ends out of register. In contrast to natural interruptions, missense mutations which replace one Gly in a triple-helix domain by a larger residue have pathological consequences, and studies on peptides containing such Gly substitutions clarify their effect on conformation, stability, and folding. Recent studies suggest peptides may also be useful in defining the basic principles of collagen self-association to the supramolecular structures found in tissues.     

Interaction of collagen-like peptide models of asymmetric acetylcholinesterase with glycosaminoglycans: spectroscopic studies of conformational changes and stability

The effect of heparin on the conformation and stability of triple-helical peptide models of the collagen tail of asymmetric acetylcholinesterase expands our understanding of heparin interactions with proteins and presents an opportunity for clarifying the nature of binding of ligands to collagen triple-helix domains. Within the collagen tail of AChE, there are two consensus sequences for heparin binding of the form BBXB, surrounded by additional basic residues. Circular dichroism studies were used to determine the effect of the addition of increasing concentrations of heparin on triple-helical peptide models for the heparin binding domains, including peptides in which the basic residues within and surrounding the consensus sequence were replaced by alanine residues. The addition of heparin caused an increased triple-helix content with saturation properties for the peptide modeling the C-terminal site, while precipitation, with no increased helix content resulted from heparin addition to the peptide modeling the N-terminal site. The results suggest that the two binding sites with a similar triple-helical conformation have distinctive ways of interacting with heparin, which must relate to small differences in the consensus sequence (GRKGR vs GKRGK) and in the surrounding basic residues. Addition of heparin increased the thermal stability of all peptides containing the consensus sequence. Heparan sulfate produced conformational and stabilization effects similar to those of heparin, while chondroitin sulfate led to a cloudy solution, loss of circular dichroism signal, and a smaller increase in thermal stability. Thus, specificity in both the sequence of the triple helix and the type of glycosaminoglycan is required for this interaction.     

Developing a programmed restriction endonuclease for highly specific DNA cleavage

Specific cleavage of large DNA molecules at few sites, necessary for the analysis of genomic DNA or for targeting individual genes in complex genomes, requires endonucleases of extremely high specificity. Restriction endonucleases (REase) that recognize DNA sequences of 4-8 bp are not sufficiently specific for this purpose. In principle, the specificity of REases can be extended by fusion to sequence recognition modules, e.g. specific DNA-binding domains or triple-helix forming oligonucleotides (TFO). We have chosen to extend the specificity of REases using TFOs, given the combinatorial flexibility this fusion offers in addressing a short, yet precisely recognized restriction site next to a defined triple-helix forming site (TFS). We demonstrate here that the single chain variant of PvuII (scPvuII) covalently coupled via the bifunctional cross-linker N-(gamma-maleimidobutryloxy) succinimide ester to a TFO (5'-NH2-[CH2](6 or 12)-MPMPMPMPMPPPPPPT-3', with M being 5-methyl-2'-deoxycytidine and P being 5-[1-propynyl]-2'-deoxyuridine), cleaves DNA specifically at the recognition site of PvuII (CAGCTG) if located in a distance of approximately one helical turn to a TFS (underlined) complementary to the TFO ('addressed' site: 5'-TTTTTTTCTCTCTCTCN(approximately 10)CAGCTG-3'), leaving 'unaddressed' PvuII sites intact. The preference for cleavage of an 'addressed' compared to an 'unaddressed' site is >1000-fold, if the cleavage reaction is initiated by addition of Mg2+ ions after preincubation of scPvuII-TFO and substrate in the absence of Mg2+ ions to allow triple-helix formation before DNA cleavage. Single base pair substitutions in the TFS prevent addressed DNA cleavage by scPvuII-TFO.     

UV damage of collagen: insights from model collagen peptides

Fibrils of Type I collagen in the skin are exposed to ultraviolet (UV) light and there have been claims that collagen photo-degradation leads to wrinkles and may contribute to skin cancers. To understand the effects of UV radiation on collagen, Type I collagen solutions were exposed to the UV-C wavelength of 254 nm for defined lengths of time at 4°C. Circular dichroism (CD) experiments show that irradiation of collagen leads to high loss of triple helical content with a new lower thermal stability peak and SDS-gel electrophoresis indicates breakdown of collagen chains. To better define the effects of UV radiation on the collagen triple-helix, the studies were extended to peptides which model the collagen sequence and conformation. CD studies showed irradiation for days led to lower magnitudes of the triple-helix maximum at 225 nm and lower thermal stabilities for two peptides containing multiple Gly-Pro-Hyp triplets. In contrast, the highest radiation exposure led to little change in the T(m) values of (Gly-Pro-Pro)(10) and (Ala-Hyp-Gly)(10) , although (Gly-Pro-Pro)(10) did show a significant decrease in triple helix intensity. Mass spectroscopy indicated preferential cleavage sites within the peptides, and identification of some of the most susceptible sites of cleavage. The effect of radiation on these well defined peptides gives insight into the sequence and conformational specificity of photo-degradation of collagen.     

Correlation between antitumor activity, molecular weight, and conformation of lentinan

A (1-->3)-beta-D-glucan having (1-->6) branching (L-FV-IB) from Lentinus edodes in water was degraded into seven fractions of different molecular weights by ultrasonic irradiation, and each was further fractionated into three parts, by precipitation from water into acetone at room temperature. The weight-average molecular weight (M(w)), radius of gyration ((z)(1/2)), and intrinsic viscosity ([eta]) of lentinan and its fractions in 0.9% NaCl aqueous solution and dimethyl sulfoxide (Me(2)SO) were determined by size-exclusion chromatography combined with multi-angle laser light scattering (SEC-LLS), LLS, and viscometry. Analysis of M(w), [eta], and (z)(1/2) in terms of known theory for worm-like chains yielded 2240 +/- 100 nm(-1), and 100 +/- 10 nm for molar mass per unit contour length (M(L)), and persistence length (q), respectively, corresponding with theoretical data for triple-helical chains. The [alpha](D) of lentinan in water-Me(2)SO mixtures indicated an order-disorder transition. The results indicated that lentinan exists as a triple helix in 0.9% NaCl aqueous solution and as a single flexible chain in Me(2)SO. Assays in vivo and in vitro against the growth of Sarcoma 180 solid tumor as well as the colorimetric 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) method for lentinan showed that the triple-helix sample exhibited a relatively high inhibition ratio. Interestingly, the triple-helix lentinan with M(w) of 1.49 x 10(6) exhibited the highest antitumor activity in vivo, having an inhibition ratio (xi) of 49.5%, close to that of 5-fluorouracil (xi = 50.5%), whereas the bioactivity (xi = 12.3%) of its single flexible chains almost disappeared. The triple-helix conformation plays an important role in enhancing the antitumor effects of lentinan.     

Stabilization of DNA Triple Helices Using Conjugates of Oligonucleotides and Synthetic Ligands

The possibility is discussed of stabilizing a DNA triple helix by covalent conjugation to the third strand (through its terminal phosphate) of ligands that have affinity to double and triple helices. Two types of stabilizers are considered: minor groove binders based on oligopyrroles, and triplex-specific intercalators. As a target, a synthetic 29-mer duplex containing a natural polypurine sequence of the human immunodeficiency provirus was employed. The stabilization with minor groove binders requires several conditions to be respected: a sufficiently long linker capable of reaching the minor groove from the major groove, a specific double-stranded structure of the oligopyrrole fragment, and its in-phase fitness to the target sequence. The best stabilizers of a triplex were novel conjugates in which two parallel molecules containing six pyrrole units each are linked to the same 5"-phosphate of a 16-mer triplex-forming oligonucleotide. The stabilizing properties of these derivatives were comparable to those of benzoindoloquinoline (BIQ) intercalators attached to the terminal phosphate of triple-helix forming oligonucleotides.     

Secretion of non-helical collagenous polypeptides of alpha1(IV) and alpha2(IV) chains upon depletion of ascorbate by cultured human cells

Our previous report showed that human fetal lung fibroblasts secreted non-disulfide-bonded, non-helical collagenous polypeptides of alpha1(IV) and alpha2(IV) chains depending on culture conditions [Connective Tissue (1999) 31, 161-168]. The secretion of non-helical collagenous polypeptides is unexpected from the current consensus that such polypeptides are not secreted under physiological conditions. The absence of interchain disulfide bonds among alpha1(IV) and alpha2(IV) chains was always correlated with the absence of triple-helical structure of the type IV collagen. The finding corresponds with the fact that the interchain disulfide bonds are formed at or close to the completion of the type IV collagen triple-helix formation. The present report shows that ascorbate is the primary factor for the triple-helix formation of the type IV collagen. When human mesangial cells were cultured with ascorbate, only the triple-helical type IV collagen was secreted. However, when the cells were cultured without ascorbate, the non-helical alpha1(IV) and alpha2(IV) chains were secreted. Relative amounts of the secreted products were unchanged with or without ascorbate, suggesting that ascorbate is required for the step of the triple-helix formation. The ascorbate-dependency of the triple-helix formation of the type IV collagen was observed in all the human cells examined. The non-helical alpha1(IV) chain produced by the ascorbate-free culture contained about 80% less hydroxyproline than the alpha1(IV) chain from the triple-helical type IV collagen. The evidence for the non-association of the non-helical alpha1(IV) and alpha2(IV) chains in the conditioned medium was obtained by an anti-alpha1(IV) antibody-coupled affinity column chromatography for the conditioned medium. Although all the non-helical alpha1(IV) chains were found in the bound fraction, all the non-helical alpha2(IV) chains were recovered in the flow-through fraction. The present findings suggest that ascorbate plays a key role in the trimerization step of three alpha chains and/or in the subsequent triple-helix formation of the type IV collagen.     

Kinetic analysis of oligodeoxyribonucleotide-directed triple-helix formation on DNA

Pyrimidine oligonucleotides recognize extended purine sequences in the major groove of double-helical DNA by triple-helix formation. The resulting local triple helices are relatively stable and can block DNA recognition by sequence-specific DNA binding proteins such as restriction endonucleases. Association and dissociation kinetics for the oligodeoxyribonucleotide 5'-CTCTTTCCTCTCTTTTTCCCC (bold C's indicate 5-methylcytosine residues) are now measured with a restriction endonuclease protection assay. When oligonucleotides are present in greater than 10-fold excess over the DNA target site, the binding reaction kinetics are pseudo first order in oligonucleotide concentration. Under our standard conditions (37 degrees C, 25 mM Tris-acetate, pH 6.8, 70 mM sodium chloride, 20 mM magnesium chloride, 0.4 mM spermine tetrahydrochloride, 10 mM beta-mercaptoethanol, 0.1 mg/mL bovine serum albumin) the value of the observed pseudo-first-order association rate constant, k2obs, is 1.8 x 10(3) +/- 1.9 x 10(2) L.(mol of oligomer-1.s-1. Measurement of the dissociation rate constant yields an equilibrium dissociation constant of approximately 10 nM. Increasing sodium ion concentration slightly decreased the association rate, substantially increased the dissociation rate, and thereby reduced the equilibrium binding constant. This effect was reversible by increasing multivalent cation concentration, confirming the significant role of multivalent cations in oligonucleotide-directed triple-helix formation under these conditions. Finally, a small reduction in association rate, a large increase in dissociation rate, and a resulting reduction in the equilibrium binding constant were observed upon increasing the pH between 6.8 and 7.2.