Biodegradable polymeric nanospheres formed by temperature-induced phase transition in a mixture of poly(lactide-co-glycolide) and poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) triblock copolymer

The mixture of poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide) triblock copolymer(F-127) and PLGA (poly(lactide-co-gycolide)) forms a liquid state above their phase transition temperatures, and the phase-separated state is induced by decreasing the temperature below the phase transition temperature. On the basis of the temperature-induced phase transition behavior in the mixture of F-127 and PLGA, a novel method for the preparation of drug-loaded PLGA nanospheres was designed and characterized by measuring the loading amount, the encapsulation efficiency, and the drug release pattern. Paclitaxel, used as a potent anticancer drug, was selected as a model drug.     

Specificity in the interaction between poly(L-glutamate) and iron (III) complex ions in aqueous solution

The binding process between sodium poly(L -glutamate) and trans-2,2′,2″,2?-tetrapyridyl-Fe(III) complex ions in aqueous solution at pH around 7 has been studied by means of equilibrium dialysis and optical measurements. The binding isotherm indicates the occurrence of a cooperative process, whereby bound molecules facilitate the association of additional molecules. According to circular dichroism (CD) data, this effect is coupled with that which sees a conformational change in the charged polypeptide upon progessive binding of complex counterions. All these features are discussed in the light of the structural characteristics of the interacting species. A stereochemical model of the association “complex” is proposed.     

Small-angle X-ray scattering study of the interaction of poly(ethylene oxide)-b-poly(propylene oxide)-b-poly(ethylene oxide) triblock copolymers with lipid bilayers

The relationship between molecular architecture and the nature of interactions with lipid bilayers has been studied for a series of poly(ethylene oxide)-b-poly(propylene oxide)-b-poly(ethylene oxide) (PEO-PPO-PEO) triblock copolymers using small-angle X-ray scattering (SAXS) and thermal analysis (differential scanning calorimetry, DSC). The number of molecular repeat units in the hydrophobic poly(propylene oxide), PPO, block has been found to be a critical determinant of the nature of triblock copolymer-lipid bilayer association. For dimyristoyl-sn-glycero-3-phosphocholine (DMPC)-based biomembrane structures, polymers possessing a PPO chain length commensurate with the acyl chain dimensions of the lipid bilayer yield highly ordered, swollen lamellar structures consistent with well-integrated (into the lipid bilayer) PPO blocks. Triblock copolymers of lesser PPO chain length yield materials with structural characteristics similar to a simple dispersion of DMPC in water. Increasing the concentration (from 4 to 12 mol %) of well-integrated triblock copolymers enhances the structural ordering of the lamellar phase, while concentrations exceeding 16 mol % result in the formation of a hexagonal phase. Examination of temperature-induced changes in the structure of these mesophases (complex fluids) reveals that if the temperature is reduced sufficiently, all compositions exclude polymer and thus exhibit the characteristic SAXS pattern for hydrated DMPC bilayers. Increasing the temperature promotes better insertion of the polymers possessing PPO chain lengths sufficient for membrane insertion. No temperature-induced structural changes are observed in compositions prepared with PEO-PPO-PEO polymers that feature PPO length insufficient to permit full incorporation into the lipid bilayer.     

Morphological control of poly(ethylene glycol)-block-poly(epsilon-caprolactone) copolymer aggregates in aqueous solution

In aqueous solution, it was found that the amphiphilic copolymer poly(ethylene glycol)-b-poly(caprolactone) (PEG(5000)-b-PCL(4100)) formed different morphologies, including long rod-like, short rod-like, or spherical aggregates, when the copolymer concentration was increased. Nearly identical morphologies were observed with the addition of increasing amounts of PEG(2000)-distearoylphosphoethanolamine (PEG(2000)-DSPE) to the copolymer. The morphologies of the aggregates in solution were confirmed by negative stain transmission electron microscopy (TEM) and cryogenic-TEM (cryo-TEM). The critical micelle concentrations of the PEG(5000)-b-PCL(4100) copolymer, PEG(2000)-DSPE and a mixture of the two materials (PEG(5000)-b-PCL 4100/PEG(2000)-DSPE) were evaluated to determine the thermodynamic stability of the aggregates. Differential scanning calorimetry was performed to gain insight into the degree of mixing of PEG(5000)-b-PCL(4100) and PEG(2000)-DSPE. Overall, combining PEG(5000)-b-PCL(4100) and PEG(2000)-DSPE produced a single population of mixed micelles with rod-like or spherical morphologies depending on the material composition and concentration.     

Correlation between the antitumor activity of a polysaccharide schizophyllan and its triple-helical conformation in dilute aqueous solution

Eight samples of a polysaccharide schizophyllan ranging in weight-average molecular weight Mw (in water) from 5 x 10(3) to 1.3 x 10(5) were prepared and their antitumor activity (expressed in terms of the tumor inhibition ratio) against Sarcoma 180 ascites, intrinsic viscosities [eta], and gel-filtration chromatograms in aqueous solution were determined. The tumor inhibition ratio was essentially unity for samples with Mw higher than 9 x 10(4), but reduced to zero or even to a negative value when Mw was lower than 10(4). The [eta] data combined with the chromatographic data showed that above Mw approximately 9 x 10(4) the predominant species of schizophyllan in aqueous solution is the previously found rigid triple helix, whereas below Mw approximately 9 x 10(4) both triple helices and single chains coexist in the solution and the fraction of triple helices decreases monotonically to zero as Mw is decreased to 5 x 10(3). From these findings it was concluded that the antitumor potency of schizophyllan in water is related to the amount of triple helices relative to that of single chains.     

Degradation behavior of poly(epsilon-caprolactone)-b-poly(ethylene glycol)-b-poly(epsilon-caprolactone) micelles in aqueous solution

Poly(epsilon-caprolactone)-b-poly(ethylene glycol)-b-poly(epsilon-caprolactone) triblock copolymers were synthesized by the ring-opening polymerization of epsilon-caprolactone in the presence of hydroxyl-terminated poly(ethylene glycol) with different molecular weights, using stannous octoate catalyst. Micelles prepared by the precipitation method with these triblock copolymers exhibit a core-shell structure. The degradation behaviors of these core-shell micelles in aqueous solution were investigated by FT-IR, 1H NMR, GPC, DLS, TEM, and AFM. It was found that the degradation behavior of micelles in aqueous solution was quite different from that of bulk materials. The size of the micelles increased in the initial degradation stages and decreased gradually when the degradation period was extended. The caprolactone/ethylene oxide (CL/EO) ratio in micelles measured by NMR also shows an increase at the initial degradation stage and a decrease at later stages. The morphology of these micelles became more and more irregular during the degradation period. We explain the observed behavior by a two-stage degradation mechanism with interfacial erosion between the cores and the shells followed by core erosion.     

Effect of residual side chain blocking groups and side chain charge on polypeptide conformation in aqueous solution

The circular dichroism (CD) spectrum of poly-L-lysine and poly-L -glutamic acid has been investigated in the presence of a small percent of side-chain blocking groups. The blocking groups benzyl, methyl, and carbobenzoxy show qualitatively similar effects. Less than five mole percent of aromatic blocking groups alters the CD spectrum. Consequently, unsuspected blocking groups may account for the variation observed in CD spectra of these polymers. A weak CD band at 235–240 nm was observed for the disordered unblocked polymer even in the absence of electrolyte. Viscosity data indicate that in salt-free solutions these chains at neutral pH still behave as random coils though with reduced conformational freedom, in contrast to some polyelectrolytes which behave as rigid rods in the absence of electrolyte. The viscosity data bring into question the relevance of isolated molecule conformational calculations to experimental CD spectra.     

Protein partitioning equilibrium between the aqueous poly(ethylene glycol) and salt phases and the solid protein phase in poly(ethylene glycol)-salt two-phase systems

True partitioning behaviour, which is independent of the protein concentration in aqueous two-phase systems, only occurs at relatively low protein concentration. The actual concentration limit depends on the properties of the protein. When the concentration of a protein exceeds relatively low values, precipitation at the interface can be observed. This protein precipitate is in equilibrium with the protein solubilized in each of the phases. This paper discusses the effect of protein solubility in view of the equilibrium of the protein concentration between the aqueous poly(ethylene glycol) and salt phases and the solid protein phase using three proteins. It was found that only rarely will the proteins be completely in solution as the concentration is increased until a solubility limit is reached and then the protein precipitates fully out of solution. A behaviour that came close to this was only seen in one case out of six. In virtually all cases, a third phase is formed which represents a solid aggregate phase which is in equilibrium with the other two, largely aqueous, phases. As the overall concentration of protein in the system is increased and the concentration in the top and bottom aqueous phases increases, the pseudo concentration in the solid-phase, C_s^′, also increases. This could have interesting implications in terms of the amount of water associated with this phase and it certainly means that in this particular case, the solid phase is not a crystal.     

Separation and recovery of DNA fragments by electrophoresis through a thermoreversible hydrogel composed of poly(ethylene oxide) and poly(propylene oxide)

We have synthesized and characterized a thermoreversible hydrogel of multiplied block copolymers, composed of poly(ethylene oxide) and poly(propylene oxide), for DNA electrophoresis. The aqueous solution of block copolymers turned into a hydrogel upon heating at temperatures above 10-11 degrees C, whereas it reverted into a solution upon cooling. Linear double-stranded DNA molecules migrated through the gel matrices at a rate that was inversely proportional to the logarithm of the DNA length. The hydrogel is most effective for separating DNA fragments in the 10- to 2000-bp range. The resolving range lay in-between the effective ranges of polyacrylamide and agarose gel electrophoreses of DNA. The gel slices containing DNA fragments were liquefied by cooling on ice, and the DNA was precipitated with ethanol. No contaminants that inhibit enzymatic reactions were found in the DNA recovered from the hydrogel. Plasmid DNA recovered from the hydrogel was recircularized with T4 DNA ligase and yielded highly efficient Escherichia coli transformation. Therefore, thermoreversible gel electrophoresis will be a useful method for DNA separation and isolation in recombinant DNA technology.     

Polycationic block copolymers of poly(ethylene oxide) and poly(propylene oxide) for cell transfection

A facile, one-step synthesis of cationic block copolymers of poly(2-N-(dimethylaminoethyl) methacrylate) (pDMAEMA) and copolymers of poly(propylene oxide) (PPO) and poly(ethylene oxide) (PEO) has been developed. The PEO-PPO-PEO-pDMAEMA (L92-pDMAEMA) and PEO-pDMAEMA copolymers were obtained via free radical polymerization of DMAEMA initiated by polyether radicals generated by cerium(IV). Over 95% of the copolymer fraction was of molecular mass ranging from 6.9 to 7.1 kDa in size, indicating the prevalence of the polyether-monoradical initiation mechanism. The L92-pDMAEMA copolymers possess parent surfactant-like surface activity. In contrast, the PEO-pDMAEMA copolymers lack significant surface activity. Both copolymers can complex with DNA. Hydrodynamic radii of the complexes of the L92-pDMAEMA and PEO-pDMAEMA with plasmid DNA ranged in size from 60 to 400 nm, depending on the copolymer/DNA ratio. Addition of Pluronic P123 to the L92-pDMAEMA complexes with DNA masked charges and decreased the tendency of the complex to aggregate, even at stoichiometric polycation/DNA ratios. The transfection efficiency of the L92-pDMAEMA copolymer was by far greater than that of the PEO-pDMAEMA copolymer. An extra added Pluronic P123 further increased the transfecton efficacy of L92-pDMAEMA, but did not affect that of PEO-pDMAEMA.     

Dynamics of water in supercooled aqueous solutions of glucose and poly(ethylene glycol)s as studied by dielectric spectroscopy

The dielectric behaviour of aqueous solutions of glucose, poly(ethylene glycol)s (PEGs) 200 and 600, and poly(vinyl pyrrolidone) (PVP) has been examined at different concentrations in the frequency range of 10(6)-10(-3) Hz by dielectric spectroscopy and by using differential scanning calorimetry down to 77 K from room temperature. The shape of the relaxation spectra and the temperature dependence of the relaxation rates have been critically examined along with temperature dependence of dielectric strength. In addition to the so-called primary (alpha-) relaxation process, which is responsible for the glass-transition event at T(g), another relaxation process of comparable magnitude has been found to bifurcate from the main relaxation process on the water-rich side, which continues to the sub-T(g) region, exhibiting relaxation at low frequencies. The sub-T(g) process dominates the dielectric measurements in aqueous solutions of higher PEGs, and the main relaxation process is seen as a weak process. The sub-T(g) process was not observed when water was replaced by methanol in the binary mixtures. These observations suggest that the sub-T(g) process in the aqueous mixtures is due to the reorientational motion of the 'confined' water molecules. The corresponding dielectric strength shows a noticeable change at T(g), indicating a hindered rotation of water molecules in the glassy phase. The nature of this confined water appears to be anomalous compared to most other supercooled confined liquids.     

Effect of chain length and concentration of anionic surfactants on the conformational transitions of poly(L-ornithine) and poly(L-lysine) in aqueous solution

The conformation of poly(L-ornithine) (PLO) and poly(L-lysine) (PLL) in solutions of sodium alkyl sulfates, CH₃(CH₂)_nSO₄Na with n = 7, 9, 11, 13 and 15 was studied by circular dichroism. PLO adopts a helical conformation in all 5 homologs and PLL a β-form in only 4 of the homologs. With octyl sulfate PLL has a helical conformation instead. These conformations were observed in solution of surfactants both below and above the critical micelle concentration.     

Novel poly(ethylene glycol) embedded polyamidoamine side chain dendritic polyurethane architecture: synthesis and preliminary studies on the cytotoxicity and interaction with tryptophan molecule

Novel polyamidoamine (PAMAM) side chain dendritic polyurethane (SCDPU-PEG) architecture embedded with poly(ethylene glycol) has been prepared. This novel SCDPU-PEG was characterized by means of FT-IR, NMR ((1)H and (13)C) spectroscopic, GPC, and thermal analyses and intrinsic viscosity measurements. Studies on cytotoxicity by means of MTT assay and interaction of L-tryptophan with this polydendron have been achieved.     

Poly(ethylene glycol) microparticles produced by precipitation polymerization in aqueous solution

Methods were developed to perform precipitation photopolymerization of PEG-diacrylate. Previously, comonomers have been added to PEG when precipitation polymerization was desired. In the present method, the LCST of the PEG itself was lowered by the addition of the kosmotropic salt sodium sulfate to an aqueous solution. Typical of a precipitation polymerization, small microparticles or microspheres (1-5 μm) resulted with relatively low polydispersity. However, aggregate formation was often severe, presumably because of a lack of stabilization of the phase-separated colloids. Microparticles were also produced by copoymerization of PEG-diacrylate with acrylic acid or aminoethylmethacrylate. The comonomers affected the zeta potential of the formed microparticles but not the size. The carboxyl groups of acrylic-acid-containing PEG microparticles were activated, and scaffolds were formed by mixing with amine-containing PEG microparticles. Although the scaffolds were relatively weak, human hepatoma cells showed excellent viability when present during microparticle cross-linking.     

Depth profile of free volume in a mixture and copolymers of poly(N-vinyl-pyrrolidone) and poly(ethylene glycol) studied by positron annihilation spectroscopy

Effect of hydrogen bonding on the depth profile of the free-volume in a mixture (weight ratio of 65:35) of poly(N-vinyl-pyrrolidone) (PVP) and poly(ethylene glycol) (PEG) and the copolymers of vinyl pyrrolidone with poly(ethylene glycol) diacrylate (PVP-PEGDA) and monomethacrylate (PVP-PEGMMA) was studied using positron annihilation spectroscopy. Doppler broadening energy spectra of annihilation radiation and positron annihilation lifetime were measured as a function of positron incident energy (0-30 keV). Significant variations of the free-volume depth profile in terms of the S parameter, ortho-positronium lifetime, intensity, and lifetime distribution are observed as a result of the hydrogen-bonding replacement of covalent bonds. The polymer mixture with hydrogen bonding through two sides of PEG short chains has a larger free volume and a wider distribution than the comb-structured PVP-PEGMMA and the network structured PVP-PEGDA. A longer ortho-positronium lifetime is observed near the surface than in the bulk. This is interpreted in terms of surface effect, free volume, and hydrogen bonding for drug delivery applications of polymeric materials.     

A convenient method for the synthesis of amine-terminated poly(ethylene oxide) and poly(epsilon-caprolactone)

A convenient synthetic route to prepare amine-terminated poly(ethylene oxide) (PEO) and poly(epsilon-caprolactone) (PCL) was described. The strategy involved two-step reactions, the condensation of hydroxyl-terminated PEO and PCL with N-benzyloxycarbonyl amino acid followed by the catalytic hydrogenation under mild conditions. NMR and GPC measurements indicated that the reactions proceeded nearly quantitatively. Amine-terminated PEO thus prepared was used to initiate the polymerization of alpha-(N(epsilon)-benzyloxycarbonyl-L-lysine) N-carboxy anhydride [lys(Z)-NCA], and the results confirmed that the reactivity of the amino group was high.     

Thermal stability studies of a globular protein in aqueous poly(ethylene glycol) by (1)H NMR

The reversible folding destabilization of hen lysozyme has been confirmed by a melting temperature (T(m)) decrease in aqueous poly(ethylene glycol) (PEG). The percent denatured, extracted from the histidine 15 C2H (H15 C2H) native and denatured peak areas from 500-MHz one-dimensional proton nuclear magnetic resonance (1D (1)H NMR) spectra in D(2)O, was analyzed through denaturation temperatures at 0% and 20% (w/w) PEG 1000. The lysozyme (3.5 mM) T(m) decreased by 4.2 degrees C and 7.1 degrees C in 20% (w/w) PEG 1000 at pH 3.8 and 3.0, respectively. The T(m) decreased with increasing lysozyme concentration. Additionally, the temperature-induced resonance migrations of 17 protons from 8 residues indicate that the native lysozyme structure undergoes temperature-induced conformational changes. The changes were essentially identical in both 0% and 20% (w/w) PEG 1000 at both pH 3.0 and 3.8. This small, local restructuring of the hydrophobic box region may be a manifestation of temperature-dependent solution hydrophobicity, whereas active-site cleft fluctuations may be due to the inherent active-site flexibility. The lysozyme structure in PEG at 35 degrees C was determined to be essentially native from the (1)H nuclear Overhauser effect spectroscopy (NOESY) fingerprint regions. Additionally, lysozyme chemical shifts, from 1D spectra, in PEG 200, 300, and 1000 at 35 degrees C and various concentrations were essentially identical, further confirming that the conformation remains native in various PEG solutions. (c) 1996 John Wiley & Sons, Inc.     

Mannosylated poly(ethylene oxide)-b-poly(epsilon-caprolactone) diblock copolymers: synthesis, characterization, and interaction with a bacterial lectin

A novel bioeliminable amphiphilic poly(ethylene oxide)-b-poly(epsilon-caprolactone) (PEO-b-PCL) diblock copolymer end-capped by a mannose residue was synthesized by sequential controlled polymerization of ethylene oxide and epsilon-caprolactone, followed by the coupling of a reactive mannose derivative to the PEO chain end. The anionic polymerization of ethylene oxide was first initiated by potassium 2-dimethylaminoethanolate. The ring-opening polymerization of epsilon-caprolactone was then initiated by the omega-hydroxy end-group of PEO previously converted into an Al alkoxide. Finally, the saccharidic end-group was attached by quaternization of the tertiary amine alpha-end-group of the PEO-b-PCL with a brominated mannose derivative. The copolymer was fully characterized in terms of chemical composition and purity by high-resolution NMR spectroscopy and size exclusion chromatography. Furthermore, measurements with a pendant drop tensiometer showed that both the mannosylated copolymer and the non-mannosylated counterpart significantly decreased the dichloromethane/water interfacial tension. Moreover, these amphiphilic copolymers formed monodisperse spherical micelles in water with an average diameter of approximately 11 nm as measured by dynamic light scattering and cryo-transmission electron microscopy. The availability of mannose as a specific recognition site at the surface of the micelles was proved by isothermal titration microcalorimetry (ITC), using the BclA lectin (from Burkholderia cenocepacia), which interacts selectively with alpha-D-mannopyranoside derivatives. The thermodynamic parameters of the lectin/mannose interaction were extracted from the ITC data. These colloidal systems have great potential for drug targeting and vaccine delivery systems.     

Solubilization of docetaxel in poly(ethylene oxide)-block-poly(butylene/styrene oxide) micelles

Poly(ethylene oxide)-block-poly(styrene oxide) (PEO-b-PSO) and PEO-b-poly(butylene oxide) (PEO-b-PBO) of different chain lengths were synthesized and characterized for their self-assembling properties in water by dynamic/static light scattering, spectrofluorimetry, and transmission electron microscopy. The resulting polymeric micelles were evaluated for their ability to solubilize and protect the anticancer drug docetaxel (DCTX) from degradation. The drug release kinetics as well as the cytotoxicity of the loaded micelles were assessed in vitro. All polymers formed micelles with a highly viscous core at low critical association concentrations (<10 mg/L). Micelle morphology depended on the nature of the hydrophobic block, with PBO- and PSO-based micelles yielding monodisperse spherical and cylindrical nanosized aggregates, respectively. The maximum solubilization capacity for DCTX ranged from 0.7 to 4.2% and was the highest for PSO micelles exhibiting the longest hydrophobic segment. Despite their high affinity for DCTX, PEO-b-PSO micelles were not able to efficiently protect DCTX against hydrolysis under accelerated stability testing conditions. Only PEO-b-PBO bearing 24 BO units afforded significant protection against degradation. In vitro, DCTX was released slower from the latter micelles, but all formulations possessed a similar cytotoxic effect against PC-3 prostate cancer cells. These data suggest that PEO-b-P(SO/BO) micelles could be used as alternatives to conventional surfactants for the solubilization of taxanes.     

Interaction of sodium decyl sulfate with poly(L-ornithine) and poly(L-lysine) in aqueous solution

The binding isotherms of sodium decyl sulfate to poly(L -ornithine), poly(D ,L -ornithine), and poly(L -lysine) at neutral pH were determined potentiometrically. The nature of a highly cooperative binding in all three cases suggests a micelle-like clustering of the surfactant ions onto the polypeptide side groups. The hydrophobic interaction between the nonpolar groups overshadows the coulombic interaction between the charged groups. The titration curves can be interpreted well by the Zimm–Bragg theory. The average cluster size of bound surfactant ions is sufficiently large to promote the β-structure of (L -Lys)_n even at a very low binding ratio of surfactant to polypeptide residue, whereas the onset of the helical structure for (L -Orn)_n begins after about 7 surfactant ions are bound to two turns of the helix. The CD results are consistent with this explanation.