Characterization of the staphylococcal beta-lactamase transposon Tn552.

The staphylococcal beta-lactamase transposon Tn552 is a member of a novel group of transposable elements. The organization of genes in Tn552 resembles that of members of the Tn21 sub-group of Tn3 family transposons, which transpose replicatively by cointegrate formation and resolution. Thus, a possible resolution site ('resL') and a resolvase gene (tnpR or 'binL') have been identified. However, consistent with the fact that Tn552 generates 6 bp (rather than 5 bp) flanking direct repeats of target DNA, neither the putative transposase protein, nor the terminal inverted repeats of Tn552 are homologous to those of Tn3 elements. Tn552, like phage Mu and retroelements, is defined by the terminal dinucleotides 5' TG .. CA 3'. A naturally occurring staphylococcal plasmid, pI9789, contains a Tn552-derived resolution system ('resR-binR') that acts as a 'hotspot' for Tn552 transposition; insertion creates a segment of DNA flanked by inversely repeated resolution sites, one (resR) on pI9789 and the other (resL) on Tn552. The putative Tn552 resolvase, the most closely related of known resolvases to the homologous DNA invertases, initially was identified as a DNA invertase ('Bin') as a result of its ability to mediate efficient inversion of this segment in vivo.     

Characterization of aStaphylococcus aureusTransposon, Tn5405,Located within Tn5404and Carrying the Aminoglycoside Resistance Genes,aphA-3andaadE

A new staphylococcal composite transposon, designated Tn5405,carrying the genesaphA-3andaadE,which encode resistance to aminoglycosides, was partially characterized. The transposon is 12 kb long and is flanked by inverted repeated sequences displaying the characteristic features of an insertion sequence, named IS1182.This insertion sequence is 1864 bp long and has 23/33-bp imperfect inverted repeats at its ends. One of the IS1182copies delimiting Tn5405contains a copy of IS1181flanked by 8-bp direct repeats. Tn5405was found in the chromosome of MRSA clinical isolate BM3121, within a Tn552-related transposon, Tn5404.Tn5404was previously characterized following its transposition onto a β-lactamase plasmid harbored by BM3121. Two forms of the recombinant β-lactamase-encoding plasmid generated by the inversion of Tn5405within Tn5404were detected. IS1182was not detected in the DNA of 4 of the 17 tested MRSA isolates containingaphA-3and resistant to streptomycin. Thus,aphA-3andaadEgenes are not disseminated only by Tn5405or related transposons delimited by IS1182.     

Tn552, a novel transposable element from Staphylococcus aureus

Tn552, one of several closely related beta-lactamase-encoding transposons from Staphylococcus aureus, has a novel set of putative transposition functions. Each is homologous with a well-characterized function from a different type of mobile genetic element. Thus, Tn552 encodes: (i) resL-binL, a co-integrate resolution system homologous with those of Tn3 family elements; (ii) p480, a potential transposase significantly homologous with the DNA integrases of eukaryotic retroviruses and retrotransposons; and (iii) p271, a potential ATP-binding protein that shows homology with the B protein of phage Mu. The 3' terminal nucleotides of Tn552 (CA), adjacent to which p480 might cleave, are the same as those of retroviruses, retrotransposons and phage Mu. The presumptive resolvase (BinL) is very closely related to BinR, which was identified as a DNA invertase and is now shown to resolve an artificial co-integrate in vivo. Furthermore, the structure of the derivative of Tn552 found in the staphylococcal plasmid pI258 can be explained by a BinL (or BinR)-mediated site-specific deletion ('resolution') event. Thus, pI258 contains only the right-hand half of Tn552, which encodes the beta-lactamase and two regulatory proteins. The latter are homologous with the beta-lactamase gene repressor and co-inducer of Bacillus licheniformis. Interestingly, the order of the regulatory genes is reversed in S. aureus compared with Bacillus licheniformis.     

Tn552 transposase purification and in vitro activities.

The Staphylococcus aureus transposon Tn552 encodes a protein (p480) containing the 'D,D(35)E' motif common to retroviral integrases and the transposases of a number of bacterial elements, including phage Mu, the integron-containing element Tn5090, Tn7 and IS3. p480 and a histidine-tagged derivative were overexpressed in Escherichia coli and purified by methods involving denaturation and renaturation. DNase I footprinting and gel binding assays demonstrated that p480 binds to two adjacent, directly repeated 23 bp motifs at each end of Tn552. Although donor strand cleavage by p480 was not detected, in vitro conditions were defined for strand transfer activity with transposon end fragments having pre-cleaved 3' termini. Strand transfer was Mn(2+)-dependent and appeared to join a single left or right end fragment to target DNA. The importance of the terminal dinucleotide CA-3' was demonstrated by mutation. The in vitro activities of p480 are consistent with its proposed function as the Tn552 transposase.     

Transposon Tn5090 of plasmid R751, which carries an integron, is related to Tn7, Mu, and the retroelements.

Integrons confer on bacterial plasmids a capability of taking up antibiotic resistance genes by integrase-mediated recombination. We show here that integrons are situated on genetic elements flanked by 25-bp inverted repeats. The element carrying the integron of R751 has three segments conserved with similar elements in Tn21 and Tn5086. Several characteristics suggest that this element is a transposon, which we call Tn5090. Tn5090 was shown to contain an operon with three open reading frames, of which two, tniA and tniB, were predicted by amino acid similarity to code for transposition proteins. The product of tniA (559 amino acids) is a probable transposase with 25% amino acid sequence identity to TnsB from Tn7. Both of these polypeptides contain the D,D(35)E motif characteristic of a protein family made up of the retroviral and retrotransposon IN proteins and some bacterial transposases, such as those of Tn552 and of a range of insertion sequences. Like the transposase genes in Tn552, Mu, and Tn7, the tniA gene was followed by a gene, tniB, for a probable ATP-binding protein. The ends of Tn5090, like those of most other elements producing D,D(35)E proteins, begin by 5'-TG and also contains a complex structure with four 19-bp repeats at the left end and three at the right end. Similarly organized repeats have been observed earlier at the termini of both Tn7 and phage Mu, where they bind their respective transposases and have a role in holoenzyme assembly. Another open reading frame observed in Tn5090, tniC, codes for a recombinase of the invertase/resolvase family, suggesting a replicative transposition mechanism. The data presented here suggest that Tn5090, Tn7, Tn552, and Mu form a subfamily of bacterial transposons which in parallel to many insertion sequences are related to the retroelements.     

Four genes, two ends, and a res region are involved in transposition of Tn5053: a paradigm for a novel family of transposons carrying either a mer operon or an integron

The complete nucleotide sequence of an 8447 bp-long mercury-resistance transposon (Tn 5053 ) has been determined. Tn 5053 is composed of two modules: (i) the mercury-resistance module and (ii) the transposition module. The mercury-resistance module carries a mer operon, merRTPFAD , and appears to be a single-ended relic of a transposon closely related to the classical mercury-resistance transposons Tn 21 and Tn 501 . The transposition module of Tn 5053 is bounded by 25 bp terminal inverted repeats and contains four genes involved in transposition, i.e. tniA, tniB, tniQ , and tniR . Transposition of Tn 5053 occurs via cointegrate formation mediated by the products of the tniABQ genes, followed by site-specific cointegrate resolution. This is catalysed by the product of the tniR gene at the res region, which is located upstream of tniR . The same pathway of transposition is used by Tn 402 (Tn 5090 ) which carries the integron of R751. Transposition genes of Tn 5053 and Tn 402 are interchangeable. Sequence analysis suggests that Tn 5053 and Tn 402 are representatives of a new family of transposable elements, which fall into a recently recognized superfamily of transposons including retroviruses, insertion sequences of the IS 3 family, and transposons Tn 552 and Tn 7 . We suggest that the tni genes were involved in the dissemination of integrons.     

Characteristics of Tn3611 and Tn3613 transposons discovered in the chromosome of the BS205 strain of Pseudomonas aeruginosa

The transposons Tn3611 (HgR, 9.0 kb) and Tn3613 (SmRCmRKmRSuRHgR, 24.0 kb) were discovered in the chromosome of Pseudomonas aeruginosa BS205. The physical and genetic maps of these transposons were constructed using restriction endonucleases EcoRI, BamHI, SalI, HindIII. Genes of the mer operon, tnpA and tnpR were localized in the Tn3611 transposon, the genes DHPS-II, aad, tnpA, tnpR being situated in the map of the Tn3613 transposon. It was established that the Tn3611 belongs to the class of Tn3-like transposons and the Tn3613 is a complex transposon flanked by inverted repeats 2.2 kb in size, the transposon comprising both Tn3611 and a migrating sequence.     

Transposition of DNA fragments flanked by two inverted Tn1 sequences: translocation of the plasmid RP4::Tn1 region harboring the Tcr marker

We have demonstrated the possibility of transposition of the plasmid RP4::Tn1 fragment (21.2 kb) carrying the tetracycline resistance (Tcr) gene and flanked by two Tn1 copies. The new transposon, designated Tn1756, bears lethal genes that kill host cells. Therefore, its transposition can only be revealed in the presence of lethality-compensating helper regions of the plasmid RP4. Thus, RP4::Tn1 consists of two transposons, Tn1755 (Tn1-Kmr-Tn1) and Tn1756 (Tn1-Tcr-Tn1), sharing the Tn1 sequences. Both of these transposons are capable of recA-independent translocation to other plasmids. Therefore, transposition of DNA fragments flanked by two inverted Tn1 sequences does not depend on Tn1 orientation.     

Identification and characterization of Tn4656, a novel class II transposon carrying a set of toluene-degrading genes from TOL plasmid pWW53

It has been reported that the toluene-degrading (xyl) genes from Pseudomonas putida plasmid pWW53 are able to translocate to broad-host-range drug resistance plasmid RP4, and pWW53-4 is one of the smallest RP4 derivatives (H. Keil, S. Keil, R. W. Pickup, and P. A. Williams, J. Bacteriol. 164:887-895, 1985). Our investigation of pWW53-4 in this study demonstrated that such a translocated region that is 39 kb long is a transposon. This mobile element, Tn4656, was classified as a class II transposon since its transposition occurred by a two-step process: transposase (TnpA)-mediated formation of the cointegrate and resolvase (TnpR)-mediated site-specific resolution of the cointegrate at the two copies of the res site. The Tn4656 TnpA and TnpR functions encoded in the rightmost 4-kb region were found to be exchangeable with those specified by other Tn1721-related class II transposons, including another toluene transposon, Tn4653. Sequence analysis of the transposition-related genes and sites of Tn4656 also supported the hypothesis that this transposon is closely related to the Tn1721-related transposons. The lower transposition frequency of Tn4656 has been suggested to be due to the unique nucleotide sequence of one of the terminal 39-bp inverted repeats.     

Characterization of a class II defective transposon carrying two haloacetate dehalogenase genes from Delftia acidovorans plasmid pUO1

The two haloacetate dehalogenase genes, dehH1 and dehH2, on the 65-kb plasmid pUO1 from Delftia acidovorans strain B were found to be located on transposable elements. The dehH2 gene was carried on an 8.9-kb class I composite transposon (TnHad1) that was flanked by two directly repeated copies of IS1071, IS1071L and IS1071R. The dehH1 gene was also flanked by IS1071L and a truncated version of IS1071 (IS1071N). TnHad1, dehH1, and IS1071N were located on a 15.6-kb class II transposon (TnHad2) whose terminal inverted repeats and res site showed high homology with those of the Tn21-related transposons. TnHad2 was defective in transposition because of its lacking the transposase and resolvase genes. TnHad2 could transpose when the Tn21-encoded transposase and resolvase were supplied in trans. These results demonstrated that Tn Had2 is a defective Tn21-related transposon carrying another class I catabolic transposon.     

Plasmid-borne cadmium resistance genes in Listeria monocytogenes are present on Tn5422, a novel transposon closely related to Tn917.

The complete (6,449-bp) nucleotide sequence of the first-described natural transposon of Listeria monocytogenes, designated Tn5422, was determined. Tn5422 is a transposon of the Tn3 family delineated by imperfect inverted repeats (IRs) of 40 bp. It contains two genes which confer cadmium resistance (M. Lebrun, A. Audurier, and P. Cossart, J. Bacteriol. 176:3040-3048, 1994) and two open reading frames that encode a transposase (TnpA) and a resolvase (TnpR) of 971 and 184 amino acids, respectively. The cadmium resistance genes and the transposition genes are transcribed in opposite directions and are separated by a putative recombination site (res). The structural elements presumed to be involved in transposition of Tn5422 (IRs, transposase, resolvase, and res) are very similar to those of Tn917, suggesting a common origin. The transposition genes were not induced by cadmium. Analysis of sequences surrounding Tn5422 in nine different plasmids of L. monocytogenes indicated that Tn5422 is a functional transposon, capable of intramolecular replicative transposition, generating deletions. This transposition process is probably the reason for the size diversity of the L. monocytogenes plasmids. Restriction analysis and Southern hybridization revealed the presence of Tn5422 in all the plasmid-mediated cadmium-resistant L. monocytogenes strains tested but not in strains encoding cadmium resistance on the chromosome.     

DNA sequence analysis of the transposon Tn3: three genes and three sites involved in transposition of Tn3.

The complete nucleotide sequence of the transposon Tn3 and of 20 mutations which affect its transposition are reported. The mutations, generated in vitro by random insertion of synthetic restriction sites, proved to contain small duplications or deletions immediately adjacent to the new restriction site. By determining the phenotype and DNA sequence of these mutations we were able to generate an overlapping phenotypic and nucleotide map. This 4957 bp transposon encodes three polypeptides which account for all but 350 bp of its total coding capacity. These proteins are the transposase, a high molecular weight polypeptide (1015 amino acids) encoded by the tnpA gene; the Tn3-specific repressor, a low molecular weight polypeptide (185 amino acids) encoded by the tnpR gene; and the 286 amino acid beta-lactamase. The 38 bp inverted repeats flanking Tn3 appear to be absolutely required in cis for Tn3 to transpose. Genetic data suggest that Tn3 contains a third site (Gill et al., 1978), designated IRS (internal resolution site), whose absence results in the insertion of two complete copies of Tn3 as direct repeats into the recipient DNA. We suggest that these direct repeats of complete copies of Tn3 are intermediates in transposition, and that the IRS site is required for recombination and subsequent segregation of the direct repeats to leave a single copy of Tn3 (Gill et al., 1978). A 23 nucleotide sequence within the amino terminus of the transposase which shares strong sequence homology with the inverted repeat may be the internal resolution site.     

Genetic evidence for absence of transposition functions from the internal part of Tn981 a relative of Tn9

Summary Inverse transposition of the DNA of pBR322 was found to be mediated by the small transposon Tn981 a relative of Tn9 flanked by direct repeats of IS1. Since the resulting structure IS1:: pBR322::IS1 (Tn983) is transposed in a second step in the absence of Tn981, it is concluded that all the functions necessary for transposition of IS1 flanked transposons are coded for by IS1 itself or the E. coli chromosome, respectively.     

Complete sequence determination combined with analysis of transposition/site-specific recombination events to explain genetic organization of IncP-7 TOL plasmid pWW53 and related mobile genetic elements

Recent studies have indicated that the evolutionarily common catabolic gene clusters are loaded on structurally diverse toluene-catabolic (TOL) plasmids and their residing transposons. To elucidate the mechanisms supporting the diversification of catabolic plasmids and transposons, we determined here the complete 107,929 bp sequence of pWW53, a TOL plasmid from Pseudomonas putida MT53. pWW53 was found to belong to the IncP-7 incompatibility group that play important roles in the catabolism of several xenobiotics. pWW53 carried two distinct transposase-resolvase gene clusters (tnpAR modules), five short terminal inverted repeats (IRs), and three site-specific resolution (res) sites that are all typical of class II transposons. This organization of pWW53 suggested the four possible transposable regions, Tn4657 to Tn4660. The largest 86 kb region (Tn4657) spanned the three other regions, and Tn4657 and Tn4660 (62 kb) covered all of the 36 xyl genes for toluene catabolism. Our subsequent transposition experiments clarified that the three transposons, Tn4657 to Tn4659, indeed exhibit their transposability, and that pWW53 also generated another 37 kb toluene-catabolic transposon, Tn4656, which carried the two separated and inversely oriented segments of pWW53: the tnpRA-IR module of Tn4658 and a part of xyl gene clusters on Tn4657. The Tn4658 transposase was able to mediate the transposition of Tn4658, Tn4657, and Tn4656, while the Tn4659 transposase catalyzed only the transposition of Tn4659. Tn4656 was formed by the Tn4658 resolvase-mediated site-specific inversion between the two inversely oriented res sites on pWW53. These findings and comparison with other catabolic plasmids clearly indicate multiple copies of transposition-related genes and sites on one plasmid and their recombination activities contribute greatly to the diversification of plasmid structures as well as wide dissemination of the evolutionary common gene clusters in various plasmids.     

Nucleotide sequence analysis of IS256 from the Staphylococcus aureus gentamicin-tobramycin-kanamycin-resistance transposon Tn4001

Resistance to the aminoglycosides gentamicin, tobramycin and kanamycin (GmTmKmR) in Australian clinical strains of Staphylococcus aureus is commonly carried on the composite transposon Tn4001. The resistance gene aacA-aphD of Tn4001, which encodes a bifunctional AAC(6')-APH(2") modifying enzyme, is flanked by two 1324-bp inverted repeats, IS256L and IS256R, that are identical in sequence. Analysis of the IS256 sequence revealed structural features characteristic of IS elements including 26-bp imperfect terminal inverted repeats and a single open reading frame with coding capacity for a 45.6 kDa protein. The nucleotide sequence of IS256 described here, together with the sequence of the aacA-aphD gene reported previously [Rouch et al., J. Gen. Microbiol. 133 (1987) 3039-3052], completes the entire sequence of Tn4001, which totals 4566 bp.     

Structural and functional analyses of the fosfomycin resistance transposon Tn2921.

The fosfomycin resistance transposon Tn2921 is flanked by directly repeated sequences homologous to the Tn10-related insertion sequence IS10. The nonrepeated DNA sequences of Tn2921 can be deleted without affecting the transposition ability of the element, showing that at least one of the direct repeats is an active insertion sequence. Transposition of Tn2921 seems to occur through direct transposition, since cointegrates have not been observed. The evolutionary relatedness of Tn2921 and IS10 is discussed.     

Properties of transposon Tn2555 carrying the genes for sucrose utilization

Tn2555, a new transposon coding for genes of sucrose utilization was studied. Tn2555 was shown to integrate into the plasmids RP4 and R6K, phage P1CmClr100 and Escherichia coli K12 chromosome. Tn2555 frequency of transposition to RP4 and R6K DNA is (2-5) X 10(-7) in Rec+-strain, (3-6) X 10(-8) in Rec--strain. Tn2555 integration site in phage P1CmClr100 Sac+-derivative studied has been localised within the C-segment of P1 DNA. In three independent cases of Tn2555 transposition to the chromosome the transposon was found to be integrated in the region between 29 and 32 min of Escherichia coli K12 linkage map. The restriction endonuclease analysis of seven independent isolates of RP4::Tn2555 has shown the grouping of Tn2555 integration sites in the Tn1 region of RP4. Frequent rearrangements occurring within Tn2555 have been revealed by the analysis. However, an invertible DNA segment of about 6-7 kb was preserved in all transposon structures.     

In vitro transposition of Tn552: a tool for DNA sequencing and mutagenesis.

We have explored the potential of the Tn 552 in vitro transposition reaction as a genetic tool. The reaction is simple (requiring a single protein component), robust and efficient, readily producing insertions into several percent of target DNA. Most importantly, Tn 552 insertions in vitro appear to be essentially random. Extensive analyses indicate that the transposon exhibits no significant regional or sequence specificity for target DNA and leaves no discernible 'cold' spots devoid of insertions. The utility of the in vitro reaction for DNA sequencing was demonstrated with a cosmid containing the Mycobacterium smegmatis recBCD gene cluster. The nucleotide sequence of the entire operon was determined using 71 independent Tn 552 insertions, which generated over 13.5 kb of unique sequence and simultaneously provided a comprehensive collection of insertion mutants. The relatively short ends of Tn 552 make construction of novel transposons a simple process and we describe several useful derivatives. The data presented suggest that Tn 552 transposition is a valuable addition to the arsenal of tools available for molecular biology and genomics.     

Tn5037-a Tn21-like mercury transposon, detected in Thiobacillus ferrooxidans

The 6645-bp mercury resistance transposon of the chemolithotrophic bacterium Thiobacillus ferrooxidans was cloned and sequenced. This transposon, named Tn5037, belongs to the Tn21 branch of the Tn21 subgroup, many members of which have been isolated from clinical sources. Having the minimum set of the genes (merRTPA), the mercury resistance operon of Tn5037 is organized similarly to most of the Gram-negative bacteria mer operons and is closest to that of Thiobacillus 3.2. The operator-promoter region of the mer operon of Tn5037 also has the common (Tn21/Tn501-like) structure. However, its inverted, presumably MerR protein binding repeats in the operator/promoter element are two base pairs shorter than in Tn21/Tn501. In the merA region, this transposon shares 77.4, 79.1, 83.2 and 87.8% identical bases with Tn21, Tn501, T. ferrooxidance E-15, and Thiobacillus 3.2, respectively. No inducibility of the Tn5037 mer operon was detected in the in vivo experiments. The transposition system (terminal repeats plus gene tnpA) of Tn5037 was inactive in Escherichia coli K12, in contrast to its resolution system (res site plus gene tnpR). However, transposition of Tn5037 in this host was provided by the tnpA gene of Tn5036, a member of the Tn21 subgroup. Sequence analysis of the Tn5037 res site suggested its recombinant nature.     

Transposon-like structures in the Bacteriodes fragilis MLS plasmid pIP 410

Summary Homoduplexes of plasmid plP 410 encoding MLS resistance in Bacteroides fragilis strain 92 revealed two transposon-like structures:a 17.4 kb loop flanked by 0.75 inverted repeats, and a 4.5 kb loop flanked by 0.2 kb inverted repeats. The large structure is deleted in a derivative plasmid harboured by a MLS susceptible strain. We have also showed that the long and short inverted repcats are structurally related.