Design, synthesis and catalytic activity of a serine protease synthetic model

Summary The design, synthesis and catalytic properties of a cyclic branched peptide carrier that possesses the catalytic triad residues of the serine proteases is reported. The synthesis of the peptide model was totally completed on solid support using three different orthogonal amino protecting groups. Hydrolytic activity measurements against Suc-Ala-Ala-Ala-pNA substrate showed that it is hydrolysed by the peptide model to a small extent. Despite this small hydrolytic activity, it is the first time, to our knowledge, that hydrolysis of such a substrate is reported by an enzyme model compound. Contrary, this enzyme model peptide showed considerable activity against the Boc-Ala-pNP substrate (k _cat =0.414 min⁻¹ andK _m =0.228 mm). These results suggest that the designed carrier brings in appropriate contact the catalytic triad residues (Ser, His, Asp) resulting in the obtained hydrolytic activity.     

Electrostatic analysis of the hepatitis C virus NS3 helicase reveals both active and allosteric site locations

Multi-conformation continuum electrostatics (MCCE) was used to analyze various structures of the NS3 RNA helicase from the hepatitis C virus in order to determine the ionization state of amino acid side chains and their pK_as. In MCCE analyses of HCV helicase structures that lacked ligands, several active site residues were identified to have perturbed pK_as in both the nucleic acid binding site and in the distant ATP-binding site, which regulates helicase movement. In all HCV helicase structures, Glu493 was unusually basic and His369 was abnormally acidic. Both these residues are part of the HCV helicase nucleic acid binding site, and their roles were analyzed by examining the pH profiles of site-directed mutants. Data support the accuracy of MCCE predicted pK_a values, and reveal that Glu493 is critical for low pH enzyme activation. Several key residues, which were previously shown to be involved in helicase-catalyzed ATP hydrolysis, were also identified to have perturbed pK_as including Lys210 in the Walker-A motif and the DExD/H-box motif residues Asp290 and His293. When DNA was present in the structure, the calculated pK_as shifted for both Lys210 and Asp290, demonstrating how DNA binding might lead to electrostatic changes that stimulate ATP hydrolysis.     

Phosphate groups as substrate determinants for casein kinase I action

Phosphorylation of rabbit muscle glycogen synthase by cyclic AMP-dependent protein kinase has been shown to enhance subsequent phosphorylation by casein kinase I (Flotow, H., and Roach, P. J. (1989) J. Biol. Chem. 264, 9126-9128). In the present study, synthetic peptides based on the sequences of the four phosphorylated regions in muscle glycogen synthase were used to probe the role of substrate phosphorylation in casein kinase I action. With all four peptides, prior phosphorylation significantly stimulated phosphorylation by casein kinase I. A series of peptides was synthesized based on the NH2-terminal glycogen synthase sequence PLSRTLS7VSS10LPGL, in which phosphorylation at Ser7 is required for modification of Ser10 by casein kinase I. The spacing between the P-Ser and the acceptor Ser was varied to have 1, 2, or 3 intervening residues. The peptide with a 2-residue spacing (-S(P)-X-X-S-) was by far the best casein kinase I substrate. When the P-Ser residue at Ser7 was replaced with P-Thr, the resulting peptide was still a casein kinase I substrate. However, substitution of Asp or Glu residues at Ser7 led to peptides that were not phosphorylated by casein kinase I. Phosphorylation of one of the other peptides showed that Thr could also be the phosphate acceptor. From these results, we propose that there are substrates for casein kinase I for which prior phosphorylation is a critical determinant of protein kinase action. In these instances, an important recognition motif for casein kinase I appears to be -S(P)/T(P)-Xn-S/T- with n = 2 much more effective than n = 1 or n = 3. Thus, casein kinase I may be involved in hierarchal substrate phosphorylation schemes in which its activity is controlled by the phosphorylation state of its substrates.     

Intrinsically disordered inhibitor of glutamine synthetase is a functional protein with random‐coil‐like pKa values

The sequential action of glutamine synthetase (GS) and glutamate synthase (GOGAT) in cyanobacteria allows the incorporation of ammonium into carbon skeletons. In the cyanobacterium Synechocystis sp. PCC 6803, the activity of GS is modulated by the interaction with proteins, which include a 65‐residue‐long intrinsically disordered protein (IDP), the inactivating factor IF7. This interaction is regulated by the presence of charged residues in both IF7 and GS. To understand how charged amino acids can affect the binding of an IDP with its target and to provide clues on electrostatic interactions in disordered states of proteins, we measured the pK_a values of all IF7 acidic groups (Glu32, Glu36, Glu38, Asp40, Asp58, and Ser65, the backbone C‐terminus) at 100 mM NaCl concentration, by using NMR spectroscopy. We also obtained solution structures of IF7 through molecular dynamics simulation, validated them on the basis of previous experiments, and used them to obtain theoretical estimates of the pK_a values. Titration values for the two Asp and three Glu residues of IF7 were similar to those reported for random‐coil models, suggesting the lack of electrostatic interactions around these residues. Furthermore, our results suggest the presence of helical structure at the N‐terminus of the protein and of conformational changes at acidic pH values. The overall experimental and in silico findings suggest that local interactions and conformational equilibria do not play a role in determining the electrostatic features of the acidic residues of IF7.     

Conformational sampling and polarization of Asp26 in pKa calculations of thioredoxin

Thioredoxin is a protein that has been used as model system by various computational methods to predict the pK_a of aspartate residue Asp26 which is 3.5 units higher than a solvent exposed one (eg, Asp20). Here, we use extensive atomistic molecular dynamics simulations of two different protonation states of Asp26 in combination with conformational analysis based on RMSD clustering and principle component analysis to identify representative conformations of the protein in solution. For each conformation, the Gibbs free energy of proton transfer between Asp26 and Asp20, which is fully solvated in a loop region of the protein, is calculated with the Amber99sb force field in alchemical transformations. The varying polarization of the two residues in different molecular environments and protonation states is described by Hirshfeld-I (HI) atomic charges obtained from the averaged polarized electron density. Our results show that the Gibbs free energy of proton transfer is dependent on the protein conformation, the proper sampling of the neighboring Lys57 residue orientations and on water molecules entering the hydrophobic cavity upon deprotonating Asp26. The inclusion of the polarization of both aspartate residues in the free energy cycle by HI atomic charges corrects the results from the non-polarizable force field and reproduces the experimental ΔpK_a value of Asp26.     

Influence of p<Emphasis Type="Italic">K</Emphasis><Subscript>a</Subscript> Shifts on the Calculated Dipole Moments of Proteins

The protein dipole moment is a low-resolution parameter that characterizes the second-order charge organization of a biomolecule. Theoretical approaches to calculate protein dipole moments rely on pK _a values, which are either computed individually for each ionizable residue or obtained from model compounds. The influence of pK _a shifts are evaluated first by comparing calculated and measured dipole moments of β-lactoglobulin. Second, calculations are made on a dataset of 66 proteins from the Protein Data Bank, and average differences are determined between dipole moments calculated with model pK _as, pK _as derived using a Poisson–Boltzmann approach, and empirically-calculated pK _as. Dipole moment predictions that neglect pK _a shifts are consistently larger than predictions in which they are included. The importance of pK _a shifts are observed to vary with protein size, internal permittivity, and solution pH.     

Crystal structure analysis,covalent docking,and molecular dynamics calculations reveal a conformational switch in PhaZ7 PHB depolymerase

An open and a closed conformation of a surface loop in PhaZ7 extracellular poly(3‐hydroxybutyrate) depolymerase were identified in two high‐resolution crystal structures of a PhaZ7 Y105E mutant. Molecular dynamics (MD) simulations revealed high root mean square fluctuations (RMSF) of the 281–295 loop, in particular at residue Asp289 (RMSF 7.62 Å). Covalent docking between a 3‐hydroxybutyric acid trimer and the catalytic residue Ser136 showed that the binding energy of the substrate is significantly more favorable in the open loop conformation compared to that in the closed loop conformation. MD simulations with the substrate covalently bound depicted 1 Å RMSF higher values for the residues 281–295 in comparison to the apo (substrate‐free) form. In addition, the presence of the substrate in the active site enhanced the ability of the loop to adopt a closed form. Taken together, the analysis suggests that the flexible loop 281–295 of PhaZ7 depolymerase can act as a lid domain to control substrate access to the active site of the enzyme. Proteins 2017; 85:1351–1361. © 2017 Wiley Periodicals, Inc.     

Optical fractionation of chlorophyll and primary production for coastal waters of the Southern Ocean

Our objective was to quantify the potential variability in remotely sensed chlorophyll a (Chl a) and primary productivity in coastal waters of the Southern Ocean. From data collected throughout the springs/summers of 1991–1994, we calculated the proportion of water column Chl a and primary productivity within the upper optical attenuation length (K ⁻¹ _par) and the satellite-weighted depth. The temporal variability was resolved every 2–3 days and was observed to be greater within years than between years. Three-year averages (n=223) revealed that 10.2 ± 3.6% of total Chl a and 14.8 ± 6.5% of production occurred within satellite-weighted depth in predominantly Case I waters. The average values were twice as high within K ⁻¹ _par, 24.1 ± 8% of total Chl a and 34 ± 9% of production respectively. Masked in these long-term averages are very large changes occurring on short time scales of seasonal blooms. We observed that the patterns of Chl a vertical distribution within blooms are also subject to taxonomic influence and dependent upon the physiological state of the phytoplankton. Highest proportions of water column Chl a in the first optical depth were measured during the rapid onset of surface cryptophyte blooms each year, i.e. 50% within K ⁻¹ _par and 30% above the satellite-weighted depth. Lowest fractions, 6% and 2% of biomass within K ⁻¹ _par and satellite-weighted depth respectively, were associated with peak bloom conditions independent of taxonomy. Our analyses suggest that satellite-dependent models of Chl a and subsequent chlorophyll-dependent primary production will be challenging to develop for the near-shore Southern Ocean, especially given the potentially high natural variability in the vertical distribution of Chl a driven by physical forcing, the photoadaptive abilities of polar phytoplankton, and taxonomic influences. Accepted: 27 August 1999     

Design, synthesis and catalytic activity of a serine protease synthetic model

The design, synthesis and catalytic properties of acyclic branched peptide carrier that possesses thecatalytic triad residues of the serine proteases isreported. The synthesis of the peptide model wastotally completed on solid support using threedifferent orthogonal amino protecting groups.Hydrolytic activity measurements againstSuc-Ala-Ala-Ala-pNA substrate showed that it ishydrolysed by the peptide model to a small extent.Despite this small hydrolytic activity, it is thefirst time, to our knowledge, that hydrolysis of such a substrate is reported by an enzyme model compound.Contrary, this enzyme model peptide showedconsiderable activity against the Boc-Ala-pNPsubstrate (k_cat = 0.414 min^–1 and K_m = 0.228 mm). These results suggest that thedesigned carrier brings in appropriate contact thecatalytic triad residues (Ser, His, Asp) resulting inthe obtained hydrolytic activity.     

Electrostatics of cysteine residues in proteins: Parameterization and validation of a simple model

One of the most popular and simple models for the calculation of pK_as from a protein structure is the semi‐macroscopic electrostatic model MEAD. This model requires empirical parameters for each residue to calculate pK_as. Analysis of current, widely used empirical parameters for cysteine residues showed that they did not reproduce expected cysteine pK_as; thus, we set out to identify parameters consistent with the CHARMM27 force field that capture both the behavior of typical cysteines in proteins and the behavior of cysteines which have perturbed pK_as. The new parameters were validated in three ways: (1) calculation across a large set of typical cysteines in proteins (where the calculations are expected to reproduce expected ensemble behavior); (2) calculation across a set of perturbed cysteines in proteins (where the calculations are expected to reproduce the shifted ensemble behavior); and (3) comparison to experimentally determined pK_a values (where the calculation should reproduce the pK_a within experimental error). Both the general behavior of cysteines in proteins and the perturbed pK_a in some proteins can be predicted reasonably well using the newly determined empirical parameters within the MEAD model for protein electrostatics. This study provides the first general analysis of the electrostatics of cysteines in proteins, with specific attention paid to capturing both the behavior of typical cysteines in a protein and the behavior of cysteines whose pK_a should be shifted, and validation of force field parameters for cysteine residues. Proteins 2012. © 2012 Wiley Periodicals, Inc.     

Effects of Mutations of Lys41 and Asp102 of Bacteriorhodopsin

Bacteriorhodopsin (BR) is a retinal protein that functions as a light-driven proton pump. In this study, six novel mutants including K41E and D102K, were obtained to verify or rule out the possibility that residues Lys41 and Asp102 are determinants of the time order of proton release and uptake, because we found that the order was reversed in another retinal protein archaerhodopsin 4 (AR4), which had different 41th and 102th residues. Our results rule out that possibility and confirm that the pK _a of the proton release complex (PRC) determines the time order. Nevertheless, mutations, especially D102K, were found to affect the kinetics of proton uptake substantially and the pK _a of Asp96. Compared to the wild-type BR (BR-WT), the decay of the M intermediate and proton uptake in the photocycle was slowed about 3-fold in D102K. Hence those residues might be involved in proton uptake and delivery to the internal proton donor.     

Structural origins of high apparent dielectric constants experienced by ionizable groups in the hydrophobic core of a protein

The side chains of Lys66, Asp66, and Glu66 in staphylococcal nuclease are fully buried and surrounded mainly by hydrophobic matter, except for internal water molecules associated with carboxylic oxygen atoms. These ionizable side chains titrate with pK_a values of 5.7, 8.8, and 8.9, respectively. To reproduce these pK_a values with continuum electrostatics calculations, we treated the protein with high dielectric constants. We have examined the structural origins of these high apparent dielectric constants by using NMR spectroscopy to characterize the structural response to the ionization of these internal side chains. Substitution of Val66 with Lys66 and Asp66 led to increased conformational fluctuations of the microenvironments surrounding these groups, even under pH conditions where Lys66 and Asp66 are neutral. When Lys66, Asp66, and Glu66 are charged, the proteins remain almost fully folded, but resonances for a few backbone amides adjacent to the internal ionizable residues are broadened. This suggests that the ionization of the internal groups promotes a local increase in dynamics on the intermediate timescale, consistent with either partial unfolding or increased backbone fluctuations of helix 1 near residue 66, or, less likely, with increased fluctuations of the charged side chains at position 66. These experiments confirm that the high apparent dielectric constants reported by internal Lys66, Asp66, and Glu66 reflect localized changes in conformational fluctuations without incurring detectable global structural reorganization. To improve structure-based pK_a calculations in proteins, we will need to learn how to treat this coupling between ionization of internal groups and local changes in conformational fluctuations explicitly.     

An analysis of the substrate specificity of insulin-stimulated protein kinase-1, a mammalian homologue of S6 kinase-II

The specificity determinants for insulin-stimulated protein kinase-I (ISPK-1) have been investigated with synthetic peptides based on naturally-occurring protein phosphoacceptor sequences. Peptides (Arg-Arg-Xaa-Ser-Xaa) that fulfill the consensus sequence for cyclic-AMP-dependent protein kinase (PK-A) are also phosphorylated readily by ISPK-1. The phosphorylation efficiency is improved by increasing the number of N-terminal arginine residues and by moving the arginyl cluster one residue further away from the serine, the nonapeptide (Arg)₄-Ala-Ala-Ser-Val-Ala being the best substrate among all the short peptides tested (K_m = 15 μM). Conversely, the substitution of either Thr for Ser or Lys for Arg is detrimental. Likewise, two flanking Pro residues and an Arg immediately N-terminal to the Ser act as negative specificity determinants. While the specificity of ISPK-1 shows several similarities to that of PK-A, including an absolute requirement for basic residues on the N-terminal side of the target Ser, it differs in several other respects including (1), the detrimental effect of a Lys for Arg substitution which is still compatible with some phosphorylation by ISPK-1, but not PK-A; (2), the presence of C-terminal acidic residues which are tolerated very well by ISPK-1, but are detrimental to PK-A; (3), the effect of substituting Phe for Val in the peptide Arg-Arg-Ala-Ser-Val-Ala, which improves the efficiency of phosphorylation by PK-A (lowering the K_m 4-fold), but has no effect on phosphorylation by ISPK-1. These differences in peptide substrate specificity may account in part for the different rates of phosphorylation of physiological substrates for ISPK-1 and PK-A, such as the G subunit of protein phosphatase-1.     

pH dependence of conformational fluctuations of the protein backbone

Proton binding equilibria (pK_a values) of ionizable groups in proteins are exquisitely sensitive to their microenvironments. Apparent pK_a values measured for individual ionizable residues with NMR spectroscopy are actually population‐weighted averages of the pK_a in different conformational microstates. NMR spectroscopy experiments with staphylococcal nuclease were used to test the hypothesis that pK_a values of surface Glu and Asp residues are affected by pH‐sensitive fluctuations of the backbone between folded and locally unfolded conformations. ¹⁵N spin relaxation studies showed that as the pH decreases from the neutral into the acidic range the amplitudes of backbone fluctuations in the ps‐ns timescale increase near carboxylic residues. Hydrogen exchange experiments suggested that backbone conformational fluctuations promoted by decreasing pH also reflect slower local or sub‐global unfolding near carboxylic groups. This study has implications for structure‐based pK_a calculations: (1) The timescale of the backbone's response to ionization events in proteins can range from ps to ms, and even longer; (2) pH‐sensitive fluctuations of the backbone can be localized to both the segment the ionizable residue is attached to or the one that occludes the ionizable group; (3) Structural perturbations are not necessarily propagated through Coulomb interactions; instead, local fluctuations appear to be coupled through the co‐operativity inherent to elements of secondary structure and to networks of hydrogen bonds. These results are consistent with the idea that local conformational fluctuations and stabilities are important determinants of apparent pK_a values of ionizable residues in proteins. Proteins 2014; 82:3132–3143. © 2014 Wiley Periodicals, Inc.     

Molecular characterization of a thermostable L-fucose isomerase from Dictyoglomus turgidum that isomerizes L-fucose and D-arabinose

A recombinant thermostable l-fucose isomerase from Dictyoglomus turgidum was purified with a specific activity of 93 U/mg by heat treatment and His-trap affinity chromatography. The native enzyme existed as a 410 kDa hexamer. The maximum activity for l-fucose isomerization was observed at pH 7.0 and 80 °C with a half-life of 5 h in the presence of 1 mM Mn²⁺ that was present one molecular per monomer. The isomerization activity of the enzyme with aldose substrates was highest for l-fucose (with a k_cat of 15,500 min⁻¹ and a K_m of 72 mM), followed by d-arabinose, d-altrose, and l-galactose. The 15 putative active-site residues within 5 Å of the substrate l-fucose in the homology model were individually replaced with other amino acids. The analysis of metal-binding capacities of these alanine-substituted variants revealed that Glu349, Asp373, and His539 were metal-binding residues, and His539 was the most influential residue for metal binding. The activities of all variants at 349 and 373 positions except for a dramatically decreased k_cat of D373A were completely abolished, suggesting that Glu349 and Asp373 were catalytic residues. Alanine substitutions at Val131, Met197, Ile199, Gln314, Ser405, Tyr451, and Asn538 resulted in substantial increases in K_m, suggesting that these amino acids are substrate-binding residues. Alanine substitutions at Arg30, Trp102, Asn404, Phe452, and Trp510 resulted in decreases in k_cat, but had little effect on K_m.     

Chemically accurate protein structures: Validation of protein NMR structures by comparison of measured and predicted pK a values

A new method is presented for evaluating the quality of protein structures obtained by NMR. This method exploits the dependence between measurable chemical properties of a protein, namely pK _a values of acidic residues, and protein structure. The accurate and fast empirical computational method employed by the PROPKA program () allows the user to test the ability of a given structure to reproduce known pK _a values, which in turn can be used as a criterion for the selection of more accurate structures. We demonstrate the feasibility of this novel idea for a series of proteins for which both␣NMR and X-ray structures, as well as pK _a values of all ionizable residues, have been determined. For the 17 NMR ensembles used in this study, this criterion is shown effective in the elimination of a large number of NMR structure ensemble members.     

Role of ionization of the phosphate cosubstrate on phosphorolysis by purine nucleoside phosphorylase (PNP) of bacterial (<Emphasis Type="Italic">E. coli</Emphasis>) and mammalian (human) origin

Kinetics of the reactions of purine nucleoside phosphorylases (PNP) from E. coli (PNP-I, the product of the deoD gene) and human erythrocytes with their natural substrates guanosine (Guo), inosine (Ino), a substrate analogue N(7)-methylguanosine (m⁷Guo), and orthophosphate (P_i, natural cosubstrate) and its thiophosphate analogue (SP_i), found to be a weak cosubstrate, have been studied in the pH range 5–8. In this pH range Guo and Ino exist predominantly in the neutral forms (pK_a 9.2 and 8.8); m⁷Guo consists of an equilibrium mixture of the cationic and zwitterionic forms (pK_a 7.0); and P_i and SP_i exhibit equilibria between monoanionic and dianionic forms (pK_a 6.7 and 5.4, respectively). The phosphorolysis of m⁷Guo (at saturated concentration) with both enzymes exhibits Michaelis kinetics with SP_i, independently of pH. With P_i, the human enzyme shows Michaelis kinetics only at pH ∼5. However, in the pH range 5–8 for the bacterial enzyme, and 6–8 for the human enzyme, enzyme kinetics with P_i are best described by a model with high- and low-affinity states of the enzymes, denoted as enzyme-substrate complexes with one or two active sites occupied by P_i, characterized by two sets of enzyme-substrate dissociation constants (apparent Michaelis constants, K _m1 and K _m2) and apparent maximal velocities (V _max1 and V _max2). Their values, obtained from non-linear least-squares fittings of the Adair equation, were typical for negative cooperativity of both substrate binding (K _m1 < K _m2) and enzyme kinetics (V _max1/K _m1 > V _max2/K _m2). Comparison of the pH-dependence of the substrate properties of P_i versus SP_i points to both monoanionic and dianionic forms of P_i as substrates, with a marked preference for the dianionic species in the pH range 5–8, where the population of the P_i dianion varies from 2 to 95%, reflected by enzyme efficiency three orders of magnitude higher at pH 8 than that at pH 5. This is accompanied by an increase in negative cooperativity, characterized by a decrease in the Hill coefficient from n _H ∼1 to n _H ∼0.7 for Guo with the human enzyme, and to n _H ∼0.7 and 0.5 for m⁷Guo with the E. coli and human enzymes, respectively. Possible mechanisms of cooperativity are proposed. Attention is drawn to the substrate properties of SP_i in relation to its structure.     

Production of high activity thermostable phytase from thermotolerant Aspergillus niger in solid state fermentation

The thermotolerant fungus, Aspergillus niger NCIM 563, was used for production of extracellular phytase on agricultural residues: wheat bran, mustard cake, cowpea meal, groundnut cake, coconut cake, cotton cake and black bean flour in solid state fermentation (SSF). Maximum enzyme activity (108 U g⁻¹ dry mouldy bran, DMB) was obtained with cowpea meal. During the fermentation phytic acid was hydrolysed completely with a corresponding increase in biomass and phytase activity within 7 days. Phosphate in the form of KH₂PO₄ (10 mg per 100 g of agriculture residue) increased phytase activity. Among various surfactants added to SSF, Trition X-100 (0.5%) exhibited a 30% increase in phytase activity. The optimum pH and temperature of the crude enzyme were 5.0 and 50°C respectively. Phytase activity (86%) was retained in buffer of pH 3.5 for 24 h. The enzyme retained 75% of its activity on incubation at 55°C for 1 h. In the presence of 1 mM K⁺ and Zn²⁺, 95% and 55% of the activity were retained. Scanning electron microscopy showed a high density growth of fungal mycelia on wheat bran particles during SSF. Journal of Industrial Microbiology & Biotechnology (2000) 24, 237–243. Received 07 June 1999/ Accepted in revised form 18 December 1999     

Serine319 and 321 Are Functional in Isocitrate Lyase from Escherichia coli

With site-directed mutagenesis, Ser319 and Ser321 in conserved stretch 3 of tetrameric isocitrate lyase from Escherichia coli were each substituted with alanine, cysteine, asparagine, or threonine in addition to simultaneous alanine/alanine substitutions. Besides their absolute conservation in all aligned isocitrate lyase sequences, the location of these serine residues, which flank a completely conserved proline, had been suggested in the active site in previous research by studies of photoinactivation of the enzyme by vanadate [Ko et al. (1992) J Biol Chem 267:91]. All substitutions for Ser321 and 319 except by threonine appreciably reduced the k_cat of E. coli isocitrate lyase relative to that for wild-type (100) as follows: S319A, 0.4; S319C, 0.05; S319N, 0.01; S319T, 32.3; S321A, 2.9; S321C, 0.3; S321N, 0.1; S321T, 0.3; and S319A/S321A, 0, with little or no effect on the K _m for the substrate Mg²⁺-D_s-isocitrate. The most active variant S319T exhibited threefold less activity than the wild-type enzyme; all variants assembled into tetramers. The S319T mutant isocitrate lyase was 100-fold more active than the S321T variant. This observation suggests that the requirement for a β-hydroxymethyl group of serine in catalysis is less important at position 319 than at position 321. Although most singly substituted variants had very low isocitrate lyase activity, all variants harboring mutant isocitrate lyase of very low activity did grow on acetate as a sole carbon source albeit with longer doubling times and lag phases. Substitution of Pro320 by Ala, Asp, Gly, or His was highly detrimental to activity and increased the K _m for substrate 3.5- to 8-fold; this suggests that Pro fixes the location of adjacent Ser OH groups and facilitates substrate binding and catalysis. From these collective results, it is proposed that Ser319 and Ser321 are involved in E. coli isocitrate lyase catalysis, perhaps by stabilizing the postulated reaction intermediate succinate trianion in the aci-carboxylate form and the related transition state via hydrogen bonding. Received: 3 September 1996 / Accepted: 20 September 1996     

Comparison of relative rates of BTEX biodegradation using respirometry

Biodegradation of BTEX by a microbial consortium isolated from a closed municipal landfill was studied using respirometric techniques. The kinetics of biodegradation were estimated from experimental oxygen uptake data using a nonlinear parameter estimation technique. All of the six compounds were rapidly degraded by the microbial culture and no substrate inhibition was observed at the concentration levels examined (200 mg L⁻¹ as COD). Microbial growth and contaminant degradation were adequately described by the Monod equation. Considerable differences were observed in the rates of BTEX biodegradation as seen from the estimates of the kinetic parameters. A three-fold variation was seen in the values of the maximum specific growth rate, μ_max. The highest value of μ_max was 0.389 h⁻¹ for p-xylene while o-xylene was characterized by a μ_max value of 0.14 h⁻¹, the lowest observed in this study. The half saturation coefficient, K _s, and the yield coefficient, Y, varied between 1.288–4.681 mg L⁻¹ and 0.272–0.645 mg mg⁻¹, respectively. Benzene and o-xylene exhibited higher resistance to biodegradation while toluene and p-xylene were rapidly degraded. Ethylbenzene and m-xylene were degraded at intermediate rates. In biodegradation experiments with a multiple substrate matrix, substrate depletion was slower than in single substrate experiments, suggesting an inhibitory nature of substrate interaction. Received 15 February 1998/ Accepted in revised form 5 July 1998