Cloning and analysis of a Candida maltosa gene which confers resistance to formaldehyde in Saccharomyces cerevisiae.

A gene (FDH1) of Candida maltosa which confers resistance to formaldehyde in Saccharomyces cerevisiae was cloned and its nucleotide sequence determined. The gene has a single intron which possesses the highly conserved splicing signals found in S. cerevisiae introns. We demonstrated that processing of the pre-mRNA of the cloned gene occurred identically in both S. cerevisiae and C. maltosa. The predicted amino acid sequence from the cloned gene showed 65.5% identity to human alcohol dehydrogenase (ADH) class III and 23.9% identity to S. cerevisiae ADH1. The most probable mechanism of resistance to formaldehyde is thought to be the glutathione-dependent oxidation of formaldehyde which is characteristic for ADH class III. The cloned FDH1 gene was successfully employed as a dominant selectable marker in the transformation of S. cerevisiae.     

Cloning and comparative mapping of a human class III (chi) alcohol dehydrogenase cDNA

A cDNA encoding human class III (chi ADH5) alcohol dehydrogenase was isolated, sequenced and used to comparatively map this unusual ADH. In their coding sequences, the three major ADH classes were approximately equisimilar, class II and III ADHs sharing the highest sequence identity (67%). A class III-like ADH was mapped to mouse chromosome 3, site of the ADH gene complex, and synteny of ADH5 with four other ADH loci on human chromosome 4 was confirmed. The nearly full-length 1613 nucleotide cDNA contained 433 nucleotides of 3' nontranslated sequence and two possible initiation sites for translation. A protein of 374 amino acid residues could be synthesized using the potential initiation codon at nucleotide 59. However, use of the likely initiation codon at nucleotide 5 would produce a protein of 392 residues with 19 additional N-terminal residues as compared to the known protein sequence. The derived protein sequence also differs at residue 166, where Tyr is found. This difference, due to a single base substitution, could result from cloning artifact, polymorphism, or two expressed class III ADH genes.     

Developmental expression of alcohol dehydrogenase (ADH3) in zebrafish (Danio rerio)

Alcohol dehydrogenase (ADH) is the primary enzyme responsible for metabolism of ethanol to acetaldehyde. One class of ADH has been described in fish, and has been found to be structurally similar to mammalian class III ADH (glutathione-dependent formaldehyde dehydrogenase) but functionally similar to class I ADH (primarily responsible for ethanol metabolism). We have cloned a cDNA by RT-PCR from zebrafish (Danio rerio) liver representing the zebrafish ADH3 gene product, with a coding region of 1131 nucleotides. The deduced amino acid sequences share 90% identity to ADH3 from the marine fish Sparus aurata, and 82 and 81% identity to the mouse and human sequences, respectively. Using a quantitative competitive RT-PCR assay, ADH3 mRNA was detected at all timepoints analyzed and was lowest between 8 and 24 h postfertilization. Thus, differential ADH3 expression may be at least partly responsible for temporal variations in the sensitivity of zebrafish embryos to developmental alcohol exposure.     

Cloning of human lysozyme gene and expression in the yeast Saccharomyces cerevisiae

cDNA clones encoding human lysozyme were isolated from a human histiocytic cell line (U-937) and a human placenta cDNA library. The clones, ranging in size from 0.5 to 0.75 kb, were identified by direct hybridization with synthetic oligodeoxynucleotides. The nucleotide sequence coding for the entire protein was determined. The derived amino acid sequence has 100% homology with the published amino acid (aa) sequence; the leader sequence codes for 18 aa. Expression and secretion of human lysozyme in Saccharomyces cerevisiae was achieved by placing the cloned cDNA under the control of a yeast gene promoter (ADH1) and the alpha-factor peptide leader sequence.     

Cloning and sequencing of a processed pseudogene derived from a human class III alcohol dehydrogenase gene

Current information on the molecular structure of human alcohol dehydrogenase (ADH) genes is fragmentary. To characterize all ADH genes, we have isolated 63 ADH clones from human genomic libraries made from one individual. Fifty-nine clones have been classified into five previously known loci: ADH1 (18 clones), ADH2 (20 clones), and ADH3 class I (16 clones), ADH4 class II (4 clones), and ADH5 class III (1 clone). Sequencing of one of the remaining four unclassified clones, SY lambda ADHE38, about 1.1 kb in length, shows no introns and three frameshift mutations in the coding region, with a total of 10 internal termination codons. When its deduced amino acid sequence was compared with those of the class I, class II, and class III ADHs, the proportions of identical amino acids were 56.7%, 55.5%, and 88.7%, respectively, suggesting that the processed pseudogene was derived from an ADH5 gene. The duplication event seems to have occurred about 3.5 million years ago, and the pseudogene has undergone a rapid change since then.     

Molecular structure of the human alcohol dehydrogenase 3 gene.

The structure and nucleotide sequence of an ADH3(1) allele, which encodes the ADH gamma 1 subunit, have been determined. The intron positions of the ADH3 gene are identical to those of the other class I and class II ADH genes. The level of nucleotide variation at the ADH3 locus is somewhat higher than those at the ADH1 and ADH2 loci.     

Molecular cloning and sequencing of the extracellular pectate lyase II gene from Erwinia carotovora Er.

Erwinia carotovora Er produces three extra-cellular pectate lyases (PL I, II, and III). The gene for pectate lyase II (pelII) of E. carotovora Er was cloned and expressed both in Escherichia coli and E. carotovora Er. Localization experiments in E. coli showed that PL II was exclusively in the cytoplasmic space, while PL II was excreted into the culture medium. The complete nucleotides of the pelII gene were sequenced and found to include one open reading frame of 1122 bp coding for a protein of 374 amino acid residues. From comparison of the N-terminal amino acid sequence between the purified PL II and the deduced protein from the nucleotide sequence we reached the conclusion that the mature protein is composed of 352 amino acids with a calculated molecular weight of 38,169 and is preceded by a typical signal sequence of 22 amino acid residues. PL II had 90.1% and 82.9% homologies with PL I and PL III in amino acid sequence, respectively.     

Expression of a Trichoderma reesei beta-xylanase gene (XYN2) in Saccharomyces cerevisiae.

The XYN2 gene encoding the main Trichoderma reesei QM 6a endo-beta-1,4-xylanase was amplified by PCR from first-strand cDNA synthesized on mRNA isolated from the fungus. The nucleotide sequence of the cDNA fragment was verified to contain a 699-bp open reading frame that encodes a 223-amino-acid propeptide. The XYN2 gene, located on URA3-based multicopy shuttle vectors, was successfully expressed in the yeast Saccharomyces cerevisiae under the control of the alcohol dehydrogenase II (ADH2) and phosphoglycerate kinase (PGK1) gene promoters and terminators, respectively. The 33-amino-acid leader peptide of the Xyn2 beta-xylanase was recognized and cleaved at the Kex2-like Lys-Arg residues, enabling the efficient secretion and glycosylation of the heterologous beta-xylanase. The molecular mass of the recombinant beta-xylanase was estimated by sodium dodecyl sulfate-polyacrylamide gel electrophoresis to be 27 kDa. The construction of fur1 ura3 S. cerevisiae strains allowed for the autoselection of the URA3-based XYN2 shuttle vectors in nonselective complex medium. These autoselective S. cerevisiae strains produced 1,200 and 160 nkat of beta-xylanase activity per ml under the control of the ADH2 and PGK1 promoters in rich medium, respectively. The recombinant enzyme showed highest activity at pH 6 and 60 degrees C and retained more than 90% of its activity after 60 min at 50 degrees C.     

cDNA cloning of porcine transforming growth factor-beta 1 mRNAs. Evidence for alternate splicing and polyadenylation

Most eukaryotic cells encode principally a 2.5-kilobase (kb) transforming growth factor (TGF)-beta 1 mRNA. However, we have found two major TGF-beta 1 RNA species, 3.5 and 2.5 kb long, in porcine tissues. The 3.5-kb species has a longer 3'-untranslated sequence generated by the selection of an alternate polyadenylation site. There is a 117-nucleotide sequence within this unique 3' region, which is similar to the PRE-1 repetitive sequence of unknown function, reported earlier in the porcine genome. We have also cloned and characterized an alternately spliced mRNA species specific for the TGF-beta 1 gene, in which exons IV and V of the corresponding human TGF-beta 1 gene are deleted. The nucleotide sequence of this cDNA clone predicts a putative precursor protein of 256 amino acids; the N-terminal 211 amino acids of this putative protein are identical to the TGF-beta 1 precursor protein (exons I, II, and III of the human TGF-beta 1 gene), but the C-terminal 45 amino acids are distinct, due to a frameshift in the translation of exons VI and VII. In addition we provide data for the existence of other mRNA species generated in a tissue-specific manner either by alternate splicing or by heterogeneous 5' leader sequences.     

Nucleotide sequence of the gene for aqualysin I (a thermophilic alkaline serine protease) of Thermus aquaticus YT-1 and characteristics of the deduced primary structure of the enzyme

Aqualysin I is an alkaline serine protease which is secreted into the culture medium by Thermus aquaticus YT-1, an extreme thermophile [Matsuzawa, H., Hamaoki, M. & Ohta, T. (1983) Agric. Biol. Chem. 47, 25-28]. The gene encoding aqualysin I was cloned into Escherichia coli using synthetic oligodeoxyribonucleotides as hybridization probes. The nucleotide sequence of the cloned DNA was determined. The primary structure of aqualysin I, deduced from the nucleotide sequence, agreed with the NH2-terminal sequence previously reported and the determined amino acid sequences, including the COOH-terminal sequence, of the tryptic peptides derived from aqualysin I. Aqualysin I comprised 281 amino acid residues and its molecular mass was determined to be 28,350. On alignment of the whole amino acid sequence, aqualysin I showed high sequence homology with the subtilisin-type serine proteases, and 43% identity with proteinase K, 37-39% with subtilisins and 34% with thermitase. Extremely high sequence identity was observed in the regions containing the active-site residues, corresponding to Asp32, His64 and Ser221 of subtilisin BPN'. The nucleotide sequence of the cloned DNA (1105 nucleotides) revealed that it contains the entire gene encoding aqualysin I and one open reading frame without a translational stop codon. Therefore, aqualysin I was considered to be produced as a large precursor, which contains a NH2-terminal portion, the protease and a COOH-terminal portion. The G + C content of the coding region for aqualysin I was 64.6%, which is lower than those of other Thermus genes (68-74%). The codon usage in the aqualysin I gene was rather random in comparison with that in other Thermus genes.     

The Escherichia coli pldC gene encoding lysophospholipase L(1) is identical to the apeA and tesA genes encoding protease I and thioesterase I, respectively.

We deduced the amino acid sequence of Escherichia coli lysophospholipase L(1) by determining the nucleotide sequence of the pldC gene encoding this enzyme. The translated protein was found to contain 208 amino acid residues with a hydrophobic leader sequence of 26 amino acid residues. The molecular weight of the purified enzyme (20,500) was in good agreement with the predicted size (20,399) of the processed protein. A search involving a data bank showed that the nucleotide sequence of the pldC gene was identical to those of the apeA and tesA genes encoding protease I and thioesterase I, respectively. Consistent with the identity of the pldC gene with these two genes, the enzyme purified from E. coli overexpressing the pldC gene showed both protease I and thioesterase I activities.     

猪圆环病毒2型ORF2基因序列分析及真核表达载体的构建

根据ＧｅｎＢａｎｋ中猪圆环病毒２型（ＰＣＶ－２）ＯＲＦ２基因序列,设计一　对引物,应用ＰＣＲ从疑患断奶仔猪多系统消耗综合症（ＰＭＷＳ）的死亡仔猪组织病料中扩增出ＯＲＦ　２全基因（７０２ｂｐ）。将此片段克隆入ｐＧＥＭ－Ｔ　ｅａｓｙ载体,筛选获得重组质粒ｐＴＯＲＦ２,并对此质　粒中的插入序列进行了测序分析,结果表明本试验克隆的ＯＲＦ２与美国ＰＣＶ－２分离株ＡＦ２６４０３９　的核苷酸及氨基酸序列同源性均达到１００％,与其他ＰＣＶ－２毒株同源性分别为９２．３％～９８．　６％和　９２．３％～９６．６％。重组质粒ｐＴＯＲＦ２经　Ｂａｍ　Ｈ　Ｉ、Ｅｃｏ　Ｒ　Ｖ双酶切,回收ＯＲＦ２基因,转　移入真　核表达载体ｐＳｅｃＴａｇ２／ＨｙｇｒｏＢ的相应酶切位点之间,构建成重组质粒ｐＳｅｃＴａｇＯＲＦ２。此重组表　达载体的构建成功为进一步研究ＯＲＦ２编码蛋白的生物学活性及建立ＰＣＶ诊断试剂盒打下基础。     

The nucleotide sequence and derived amino acid sequence of cDNA coding for mouse carbonic anhydrase II

The nucleotide sequence of a clone containing mouse carbonic anhydrase (CA) cDNA in pBR322 has been determined. The cloned cDNA contains all of the coding region except for nucleotides specifying the first eight amino acids, and all of the 3' noncoding region, which consists of 700 nucleotides. A cDNA clone was identified which contains an additional 54 bp at the 5' end, so that the complete amino acid sequence of mouse CA could be deduced. This sequence showed a 73-81% homology with other mammalian CA form II isozymes, 56-63% with form I isozymes, and 52-56% with form III isozymes. By examination of the amino acids which are unique and invariant for each isozyme, the mouse amino acid sequence was found to contain 16 of the 23 residues that are unique and invariant to mammalian CA form II isozymes, but only one or no residue for forms I and III, respectively.     

Molecular Cloning and Sequencing of the Extracellular Pectate Lyase II Gene from Erwinia carotovora Er

Erwinia carotovora Er produces three extra-cellular pectate lyases (PL I, II, and III). The gene for peetate lyase II (pelII) of E. carotovora Er was cloned and expressed both in Escherichia coli and E. carotovora Er. Localization experiments in E. coli showed that PL II was exclusively in the cytoplasmic space, while PL II was excreted into the culture medium. The complete nucleotides of the pelII gene were sequenced and found to include one open reading frame of 1122 bp coding for a protein of 374 amino acid residues. From comparison of the N-terminal amino acid sequence between the purified PL II and the deduced protein from the nucleotide sequence we reached the conclusion that the mature protein is composed of 352 amino acids with a calculated molecular weight of 38,169 and is preceded by a typical signal sequence of 22 amino acid residues. PL II had 90.1 % and 82.9% homologies with PL I and PL III in amino acid sequence, respectively.