Engineering domain-swapped binding interfaces by mutually exclusive folding

Domain swapping is a mechanism for forming protein dimers and oligomers with high specificity. It is distinct from other forms of oligomerization in that the binding interface is formed by reciprocal exchange of polypeptide segments. Swapping plays a physiological role in protein–protein recognition, and it can also potentially be exploited as a mechanism for controlled self-assembly. Here, we demonstrate that domain-swapped interfaces can be engineered by inserting one protein into a surface loop of another protein. The key to facilitating a domain swap is to destabilize the protein when it is monomeric but not when it is oligomeric. We achieve this condition by employing the “mutually exclusive folding” design to apply conformational stress to the monomeric state. Ubiquitin (Ub) is inserted into one of six surface loops of barnase (Bn). The 38-Å amino-to-carboxy-terminal distance of Ub stresses the Bn monomer, causing it to split at the point of insertion. The 2.2-Å X-ray structure of one insertion variant reveals that strain is relieved by intermolecular folding with an identically unfolded Bn domain, resulting in a domain-swapped polymer. All six constructs oligomerize, suggesting that inserting Ub into each surface loop of Bn results in a similar domain-swapping event. Binding affinity can be tuned by varying the length of the peptide linkers used to join the two proteins, which modulates the extent of stress. Engineered, swapped proteins have the potential to be used to fabricate “smart” biomaterials, or as binding modules from which to assemble heterologous, multi-subunit protein complexes.     

Mechanism and hydrophobic forces driving membrane protein insertion of subunit II of cytochrome bo 3 oxidase

Subunit II (CyoA) of cytochrome bo₃ oxidase, which spans the inner membrane twice in bacteria, has several unusual features in membrane biogenesis. It is synthesized with an amino-terminal cleavable signal peptide. In addition, distinct pathways are used to insert the two ends of the protein. The amino-terminal domain is inserted by the YidC pathway whereas the large carboxyl-terminal domain is translocated by the SecYEG pathway. Insertion of the protein is also proton motive force (pmf)-independent. Here we examined the topogenic sequence requirements and mechanism of insertion of CyoA in bacteria. We find that both the signal peptide and the first membrane-spanning region are required for insertion of the amino-terminal periplasmic loop. The pmf-independence of insertion of the first periplasmic loop is due to the loop's neutral net charge. We observe also that the introduction of negatively charged residues into the periplasmic loop makes insertion pmf dependent, whereas the addition of positively charged residues prevents insertion unless the pmf is abolished. Insertion of the carboxyl-terminal domain in the full-length CyoA occurs by a sequential mechanism even when the CyoA amino and carboxyl-terminal domains are swapped with other domains. However, when a long spacer peptide is added to increase the distance between the amino-terminal and carboxyl-terminal domains, insertion no longer occurs by a sequential mechanism.     

Ubiquitin is a novel substrate for human insulin-degrading enzyme

Insulin-degrading enzyme (IDE) can degrade insulin and amyloid-β, peptides involved in diabetes and Alzheimer's disease, respectively. IDE selects its substrates based on size, charge, and flexibility. From these criteria, we predict that IDE can cleave and inactivate ubiquitin (Ub). Here, we show that IDE cleaves Ub in a biphasic manner, first, by rapidly removing the two C-terminal glycines (k_cat = 2 s^− 1) followed by a slow cleavage between residues 72 and 73 (k_cat = 0.07 s^−  1), thereby producing the inactive 1-74 fragment of Ub (Ub1-74) and 1-72 fragment of Ub (Ub1-72). IDE is a ubiquitously expressed cytosolic protein, where monomeric Ub is also present. Thus, Ub degradation by IDE should be regulated. IDE is known to bind the cytoplasmic intermediate filament protein nestin with high affinity. We found that nestin potently inhibits the cleavage of Ub by IDE. In addition, Ub1-72 has a markedly increased affinity for IDE (∼ 90-fold). Thus, the association of IDE with cellular regulators and product inhibition by Ub1-72 can prevent inadvertent proteolysis of cellular Ub by IDE. Ub is a highly stable protein. However, IDE instead prefers to degrade peptides with high intrinsic flexibility. Indeed, we demonstrate that IDE is exquisitely sensitive to Ub stability. Mutations that only mildly destabilize Ub (ΔΔG <  0.6 kcal/mol) render IDE hypersensitive to Ub with rate enhancements greater than 12-fold. The Ub-bound IDE structure and IDE mutants reveal that the interaction of the exosite with the N-terminus of Ub guides the unfolding of Ub, allowing its sequential cleavages. Together, our studies link the control of Ub clearance with IDE.     

Structure and Dynamics of NBD1 from CFTR Characterized Using Crystallography and Hydrogen/Deuterium Exchange Mass Spectrometry

The ΔF508 mutation in nucleotide-binding domain 1 (NBD1) of the cystic fibrosis transmembrane conductance regulator (CFTR) is the predominant cause of cystic fibrosis. Previous biophysical studies on human F508 and ΔF508 domains showed only local structural changes restricted to residues 509-511 and only minor differences in folding rate and stability. These results were remarkable because ΔF508 was widely assumed to perturb domain folding based on the fact that it prevents trafficking of CFTR out of the endoplasmic reticulum. However, the previously reported crystal structures did not come from matched F508 and ΔF508 constructs, and the ΔF508 structure contained additional mutations that were required to obtain sufficient protein solubility. In this article, we present additional biophysical studies of NBD1 designed to address these ambiguities. Mass spectral measurements of backbone amide ¹H/²H exchange rates in matched F508 and ΔF508 constructs reveal that ΔF508 increases backbone dynamics at residues 509-511 and the adjacent protein segments but not elsewhere in NBD1. These measurements also confirm a high level of flexibility in the protein segments exhibiting variable conformations in the crystal structures. We additionally present crystal structures of a broader set of human NBD1 constructs, including one harboring the native F508 residue and others harboring the ΔF508 mutation in the presence of fewer and different solubilizing mutations. The only consistent conformational difference is observed at residues 509-511. The side chain of residue V510 in this loop is mostly buried in all non-ΔF508 structures but completely solvent exposed in all ΔF508 structures. These results reinforce the importance of the perturbation ΔF508 causes in the surface topography of NBD1 in a region likely to mediate contact with the transmembrane domains of CFTR. However, they also suggest that increased exposure of the 509-511 loop and increased dynamics in its vicinity could promote aggregation in vitro and aberrant intermolecular interactions that impede trafficking in vivo.     

Detection and characterization of the in vitro e3 ligase activity of the human MID1 protein

Human MID1 (midline-1) is a microtubule-associated protein that is postulated to target the catalytic subunit of protein phosphatase 2A for degradation. It binds alpha4 that then recruits the catalytic subunit of protein phosphatase 2A. As a member of the TRIM (tripartite motif) family, MID1 has three consecutive zinc-binding domains—RING (really interesting new gene), Bbox1, and Bbox2—that have similar ββα-folds. Here, we describe the in vitro characterization of these domains individually and in tandem. We observed that the RING domain exhibited greater ubiquitin (Ub) E3 ligase activity compared to the Bbox domains. The amount of autopolyubiquitinated products with RING-Bbox1 and RING-Bbox1-Bbox2 domains in tandem was significantly greater than those of the individual domains. However, no polyubiquitinated products were observed for the Bbox1-Bbox domains in tandem. Using mutants of Ub, we observed that these MID1 domain constructs facilitate Ub chain elongation via Lys63 of Ub. In addition, we observed that the high-molecular-weight protein products were primarily due to polyubiquitination at one site (Lys154) on the Bbox1 domain of the RING-Bbox1 and RING-Bbox1-Bbox2 constructs. We observed that MID1 E3 domains could interact with multiple E2-conjugating enzymes. Lastly, a 45-amino-acid peptide derived from the C-terminus of alpha4 that binds tightly to Bbox1 was observed to be monoubiquitinated in the assay and appears to down-regulate the amount of polyubiquitinated products formed. These studies shed light on MID1 E3 ligase activity and show how its three zinc-binding domains can contribute to MID1's overall function.     

Energetic Communication between Functional Sites of the Gene-3-Protein during Infection by Phage fd

To initiate infection of Escherichia coli, phage fd uses its gene-3-protein (G3P) to bind first to an F pilus and then to the TolA protein at the cell surface. G3P is normally auto-inhibited because a tight interaction between the two N-terminal domains N1 and N2 buries the TolA binding site. Binding of N2 to the pilus activates G3P by initiating long-range conformational changes that are relayed to the domain interface and to a proline timer. We discovered that the 23–28 loop of the N1 domain is critical for propagating these conformational signals. The analysis of the stability and the folding dynamics of G3P variants with a shortened loop combined with TolA interaction studies and phage infection experiments reveal how the contact between the N2 domain and the 23–28 loop of N1 is energetically linked with the interdomain region and the proline timer and how it affects phage infectivity. Our results illustrate how conformational transitions and prolyl cis/trans isomerization can be coupled energetically and how conformational signals to and from prolines can be propagated over long distances in proteins.     

NMR unfolding studies on a liver bile acid binding protein reveal a global two-state unfolding and localized singular behaviors

The folding properties of a bile acid binding protein, belonging to a subfamily of the fatty acid binding proteins, have been here investigated both by hydrogen exchange measurements, using the SOFAST NMR approach, and urea denaturation experiments. The urea unfolding profiles of individual residues, acting as single probes, were simultaneously analyzed through a global fit, according to a two-state unfolding model. The resulting conformational stability ΔG_U(H₂O) = 7.2 ± 0.25 kcal mol⁻¹ is in good agreement with hydrogen exchange stability ΔG_op. While the majority of protein residues satisfy this model, few amino-acids display a singular behavior, not directly amenable to the presence of a folding intermediate, as reported for other fatty acid binding proteins. These residues are part of a protein patch characterized by enhanced plasticity. To explain this singular behavior a tentative model has been proposed which takes into account the interplay between the dynamic features and the formation of transient aggregates. A functional role for this plasticity, related to translocation across the nuclear membrane, is discussed.     

Overcoming hysteresis to attain reversible equilibrium folding for outer membrane phospholipase A in phospholipid bilayers

The free energy of unfolding of a membrane protein from lipids into water (ΔG^o_w,l) describes its equilibrium thermodynamic stability. Knowing this parameter gives insight into a membrane protein's sequence-structure-energy relationships. However, there are few measures of membrane protein stability because of the technical difficulties associated with unfolded and partially folded states. Here, we describe the experimental process that allowed us to measure the ΔG^o_w,l of the outer membrane phospholipase A into large unilamellar vesicles (LUVs) of 1,2-dilauroyl-sn-glycero-3-phosphocholine. To arrive at this reversible folding condition, we screened a large number of experimental variables: temperature, incubation time, salt concentration, pH, lipid composition and liposome morphology. The principal challenge we encountered under most conditions was hysteresis between folding and unfolding titrations. A second factor that compromised reversible folding was the observation that a fraction of the protein population tended to aggregate. We found that hysteresis could be completely eliminated on a feasible timescale by conducting experiments at acidic pH, by the slow dilution of the protein in the initial titration setup and by utilizing a low concentration of a detergent as a temporary “holdase” to solubilize the protein upon its initial dilution into folding conditions. We confirmed that the detergent did not disrupt the LUVs using fluorescence emission of lipid-sensitive dyes and light scattering. The results of our parameter search should be generally useful for efforts to measure ΔG^o_w,l for other membrane proteins.     

The stability of the TIM-barrel domain of a psychrophilic chitinase

Chitinase 60 from the psychrophilic bacterium Moritella marina (MmChi60) is a four-domain protein whose structure revealed flexible hinge regions between the domains, yielding conformations in solution that range from fully extended to compact. The catalytic domain is a shallow-grooved TIM-barrel. Heat-induced denaturation experiments of the wild-type and mutants resulting from the deletions of the two-Ig-like domains and the chitin binding domain reveal calorimetric profiles that are consistent with non-collaborative thermal unfolding of the individual domains, a property that must be associated to the “hinge-regions”. The calorimetric measurements of the (β/α)₈ catalytic domain reveal that the thermal unfolding is a slow-relaxation transition exhibiting a stable, partially structured intermediate state. Circular dichroism provides evidence that the intermediate exhibits features of a molten globule i.e., loss of tertiary structure while maintaining the secondary structural elements of the native. GdnHCl-induced denaturation studies of the TIM-barrel demonstrate an extraordinarily high resistance to the denaturant. Slow-relaxation kinetics characterize the unfolding with equilibration times exceeding six days, a property that is for the first time observed for a psychrophilic TIM barrel. On the other hand, the thermodynamic stability is ΔG=6.75±1.3 kcal/mol, considerably lower than for structural-insertions-containing barrels. The mutant E153Q used for the crystallographic studies of MmChi60 complexes with NAG ligands has a much lower stability than the wild-type.     

Thermodynamic parameters of stabilization of the Yersinia pestis Caf113-149 subunit in compact form

Several experimental methods (circular dichroism, viscosity, intrinsic fluorescence, and fluorescence labeling) were used to study the conformational folding/unfolding transitions in a compact monomeric form of the Caf1_13-149 subunit under the action of guanidine hydrochloride in the temperature range 5–45°C. It has been shown that transitions always occur between two major states (unfolded and compact). This has made it possible to determine all the main thermodynamic functions that characterize the compact state of the Caf1_13-149 subunit: stability temperature T _m, free energy of stabilization ΔG _st, enthalpy ΔH _tr, and heat capacity jump ΔC in collapse of the structure. These data have been confirmed by an independent experiment on melting of fluorescently labeled protein.     

Alteration of the C-Terminal Ligand Specificity of the Erbin PDZ Domain by Allosteric Mutational Effects

Modulation of protein binding specificity is important for basic biology and for applied science. Here we explore how binding specificity is conveyed in PDZ (postsynaptic density protein-95/discs large/zonula occludens-1) domains, small interaction modules that recognize various proteins by binding to an extended C terminus. Our goal was to engineer variants of the Erbin PDZ domain with altered specificity for the most C-terminal position (position 0) where a Val is strongly preferred by the wild-type domain. We constructed a library of PDZ domains by randomizing residues in direct contact with position 0 and in a loop that is close to but does not contact position 0. We used phage display to select for PDZ variants that bind to 19 peptide ligands differing only at position 0. To verify that each obtained PDZ domain exhibited the correct binding specificity, we selected peptide ligands for each domain. Despite intensive efforts, we were only able to evolve Erbin PDZ domain variants with selectivity for the aliphatic C-terminal side chains Val, Ile and Leu. Interestingly, many PDZ domains with these three distinct specificities contained identical amino acids at positions that directly contact position 0 but differed in the loop that does not contact position 0. Computational modeling of the selected PDZ domains shows how slight conformational changes in the loop region propagate to the binding site and result in different binding specificities. Our results demonstrate that second-sphere residues could be crucial in determining protein binding specificity.     

The differential stability of the left and right domains of papain

We have investigated the differential stability of the two domains of papain, a broad specific cysteine protease, which is one of the most commonly used enzyme in various industries. The denaturant induced equilibrium unfolding of this enzyme has been investigated by different spectroscopic techniques. By site specific fluorescent labeling of one of the domain, we observed that during the unfolding process, L domain unfolds first and the R domain unfolds at a later stage. Spectroscopic studies reveal a biphasic unfolding transition, suggesting the presence of an intermediate during the unfolding process. The intermediate is observed between 1.5 and 2.5 M GuHCl and between 3 and 5 M in the case of urea induced unfolding. The unfolding process for both native to intermediate and intermediate to unfolded species is reversible in the case of urea unfolding, with a ΔG of ?2.4 and ?5.5 kcal/mole respectively where as for GuHCl unfolding only native to intermediate species is reversible indicating the predominance of hydrophobic interactions in the stability of the molecule.     

Conformational stability of α-amylase from malted sorghum (Sorghum bicolor): Reversible unfolding by denaturants

α-Amylase from Sorghum bicolor, is reversibly unfolded by chemical denaturants at pH 7.0 in 50 mM Hepes containing 13.6 mM calcium and 15 mM DTT. The isothermal equilibrium unfolding at 27 °C is characterized by two state transition with ΔG (H₂O) of 16.5 kJ mol⁻¹ and 22 kJ mol⁻¹, respectively, at pH 4.8 and pH 7.0 for GuHCl and ΔG (H₂O) of 25.2 kJ mol⁻¹ at pH 4.8 for urea. The conformational stability indicators such as the change in excess heat capacity (ΔC_p), the unfolding enthalpy (H_g) and the temperature at ΔG = 0 (T_g) are 17.9 ± 0.7 kJ mol⁻¹ K⁻¹, 501.2 ± 18.2 kJ mol⁻¹ and 337.3 ± 6.9 K at pH 4.8 and 14.3 ± 0.5 kJ mol⁻¹ K⁻¹, 509.3 ± 21.7 kJ mol⁻¹ and 345.4 ± 4.8 K at pH 7.0, respectively. The reactivity of the conserved cysteine residues, during unfolding, indicates that unfolding starts from the ‘B’ domain of the enzyme. The oxidation of cysteine residues, during unfolding, can be prevented by the addition of DTT. The conserved cysteine residues are essential for enzyme activity but not for the secondary and tertiary fold acquired during refolding of the denatured enzyme. The pH dependent stability described by ΔG (H₂O) and the effect of salt on urea induced unfolding confirm the role of electrostatic interactions in enzyme stability.     

Left-Handed Dimer of EphA2 Transmembrane Domain: Helix Packing Diversity among Receptor Tyrosine Kinases

The Eph receptor tyrosine kinases and their membrane-bound ephrin ligands control a diverse array of cell-cell interactions in the developing and adult organisms. During signal transduction across plasma membrane, Eph receptors, like other receptor tyrosine kinases, are involved in lateral dimerization and subsequent oligomerization presumably with proper assembly of their single-span transmembrane domains. Spatial structure of dimeric transmembrane domain of EphA2 receptor embedded into lipid bicelle was obtained by solution NMR, showing a left-handed parallel packing of the transmembrane helices (535-559)₂. The helices interact through the extended heptad repeat motif L⁵³⁵X₃G⁵³⁹X₂A⁵⁴²X₃V⁵⁴⁶X₂L⁵⁴⁹ assisted by intermolecular stacking interactions of aromatic rings of (FF⁵⁵⁷)₂, whereas the characteristic tandem GG4-like motif A⁵³⁶X₃G⁵⁴⁰X₃G⁵⁴⁴ is not used, enabling another mode of helix-helix association. Importantly, a similar motif AX₃GX₃G as was found is responsible for right-handed dimerization of transmembrane domain of the EphA1 receptor. These findings serve as an instructive example of the diversity of transmembrane domain formation within the same family of protein kinases and seem to favor the assumption that the so-called rotation-coupled activation mechanism may take place during the Eph receptor signaling. A possible role of membrane lipid rafts in relation to Eph transmembrane domain oligomerization and Eph signal transduction was also discussed.     

Alternative Exon 9-Encoded Relay Domains Affect More than One Communication Pathway in the Drosophila Myosin Head

We investigated the biochemical and biophysical properties of one of the four alternative regions within the Drosophila myosin catalytic domain: the relay domain encoded by exon 9. This domain of the myosin head transmits conformational changes in the nucleotide-binding pocket to the converter domain, which is crucial to coupling catalytic activity with mechanical movement of the lever arm. To study the function of this region, we used chimeric myosins (IFI-9b and EMB-9a), which were generated by exchange of the exon 9-encoded domains between the native embryonic body wall (EMB) and indirect flight muscle isoforms (IFI). Kinetic measurements show that exchange of the exon 9-encoded region alters the kinetic properties of the myosin S1 head. This is reflected in reduced values for ATP-induced actomyosin dissociation rate constant (K₁k₊₂) and ADP affinity (K_AD), measured for the chimeric constructs IFI-9b and EMB-9a, compared to wild-type IFI and EMB values. Homology models indicate that, in addition to affecting the communication pathway between the nucleotide-binding pocket and the converter domain, exchange of the relay domains between IFI and EMB affects the communication pathway between the nucleotide-binding pocket and the actin-binding site in the lower 50-kDa domain (loop 2). These results suggest an important role of the relay domain in the regulation of actomyosin cross-bridge kinetics.     

SEA domain autoproteolysis accelerated by conformational strain: energetic aspects

A subclass of proteins with the SEA (sea urchin sperm protein, enterokinase, and agrin) domain fold exists as heterodimers generated by autoproteolytic cleavage within a characteristic G^− 1S^+ 1VVV sequence. Autoproteolysis occurs by a nucleophilic attack of the serine hydroxyl on the vicinal glycine carbonyl followed by an N → O acyl shift and hydrolysis of the resulting ester. The reaction has been suggested to be accelerated by the straining of the scissile peptide bond upon protein folding. In an accompanying article, we report the mechanism; in this article, we provide further key evidence and account for the energetics of coupled protein folding and autoproteolysis. Cleavage of the GPR116 domain and that of the MUC1 SEA domain occur with half-life (t_½) values of 12 and 18 min, respectively, with lowering of the free energy of the activation barrier by ∼ 10 kcal mol^− 1 compared with uncatalyzed hydrolysis. The free energies of unfolding of the GPR116 and MUC1 SEA domains were measured to ∼ 11 and ∼ 15 kcal mol^− 1, respectively, but ∼ 7 kcal mol^− 1 of conformational energy is partitioned as strain over the scissile peptide bond in the precursor to catalyze autoproteolysis by substrate destabilization. A straining energy of ∼ 7 kcal mol^− 1 was measured by using both a pre-equilibrium model to analyze stability and cleavage kinetics data obtained with the GPR116 SEA domain destabilized by core mutations or urea addition, as well as the difference in thermodynamic stabilities of the MUC1 SEA precursor mutant S1098A (with a G^− 1A^+ 1VVV motif) and the wild-type protein. The results imply that cleavage by N → O acyl shift alone would proceed with a t_½ of ∼ 2.3 years, which is too slow to be biochemically effective. A subsequent review of structural data on other self-cleaving proteins suggests that conformational strain of the scissile peptide bond may be a common mechanism of autoproteolysis.     

SEA domain autoproteolysis accelerated by conformational strain: mechanistic aspects

A subclass of SEA (sea urchin sperm protein, enterokinase, and agrin) domain proteins undergoes autoproteolysis between glycine and serine in a conserved G^− 1S^+ 1VVV motif to generate stable heterodimers. Autoproteolysis has been suggested to involve only the intramolecular catalytic action of the conserved serine hydroxyl in combination with conformational strain of the glycine-serine peptide bond. We conducted a number of experiments and simulations on the SEA domain from the MUC1 mucin to test this mechanism. Alanine-scanning mutagenesis of polar residues in the vicinity of the cleavage site demonstrates that only the nucleophile at position + 1 is required for efficient proteolysis. Molecular modeling shows that an uncleaved trans peptide is incompatible with the native heterodimeric structure, resulting in disruption of secondary structure elements and distortion of the scissile peptide bond. Insertion of glycine residues (to obtain G_nG^− 1S^+ 1VVV motifs) appears to relieve strain, and autoproteolysis is 100 times slower in a 1G (n = 1) mutant and not measurable in 2G and 4G mutants. Removal of the catalytic serine hydroxyl hampers cleavage considerably, but measurable autoproteolysis of this S1098A mutant still proceeds in the presence of strain alone. The uncleaved SEA precursor populates interconverting partially folded conformations, and autoproteolysis coincides with adoption of proper β-sheet secondary structure and completed folding. Molecular dynamics simulations of the precursor show that the serine hydroxyl and the preceding glycine carbonyl carbon can be in van der Waals contact at the same time as the scissile peptide bond becomes strained. These observations are all consistent with autoproteolysis accelerated by N → O acyl shift and conformational strain imposed upon protein folding in a reaction for which the free-energy barrier is decreased by substrate destabilization rather than by transition-state stabilization. The energetics of this coupled folding and autoproteolysis mechanism is accounted for in an accompanying article.     

Influence of the stability of a fused protein and its distance to the amyloidogenic segment on fibril formation

Conversion of native proteins into amyloid fibrils is irreversible and therefore it is difficult to study the interdependence of conformational stability and fibrillation by thermodynamic analyses. Here we approached this problem by fusing amyloidogenic poly-alanine segments derived from the N-terminal domain of the nuclear poly (A) binding protein PABPN1 with a well studied, reversibly unfolding protein, CspB from Bacillus subtilis. Earlier studies had indicated that CspB could maintain its folded structure in fibrils, when it was separated from the amyloidogenic segment by a long linker. When CspB is directly fused with the amyloidogenic segment, it unfolds because its N-terminal chain region becomes integrated into the fibrillar core, as shown by protease mapping experiments. Spacers of either 3 or 16 residues between CspB and the amyloidogenic segment were not sufficient to prevent this loss of CspB structure. Since the low thermodynamic stability of CspB (ΔG _D = 12.4 kJ/mol) might be responsible for unfolding and integration of CspB into fibrils, fusions with a CspB mutant with enhanced thermodynamic stability (ΔG _D = 26.9 kJ/mol) were studied. This strongly stabilized CspB remained folded and prevented fibril formation in all fusions. Our data show that the conformational stability of a linked, independently structured protein domain can control fibril formation.     

Ordering of C-terminal loop and glutaminase domains of glucosamine-6-phosphate synthase promotes sugar ring opening and formation of the ammonia channel

Glucosamine-6-phosphate synthase (GlmS) channels ammonia from glutamine at the glutaminase site to fructose 6-phosphate (Fru6P) at the synthase site. Escherichia coli GlmS is composed of two C-terminal synthase domains that form the dimer interface and two N-terminal glutaminase domains at its periphery. We report the crystal structures of GlmS alone and in complex with the glucosamine-6-phosphate product at 2.95 Å and 2.9 Å resolution, respectively. Surprisingly, although the whole protein is present in this crystal form, no electron density for the glutaminase domain was observed, indicating its mobility. Comparison of the two structures with that of the previously reported GlmS-Fru6P complex shows that, upon sugar binding, the C-terminal loop, which forms the major part of the channel walls, becomes ordered and covers the synthase site. The ordering of the glutaminase domains likely follows Fru6P binding by the anchoring of Trp74, which acts as the gate of the channel, on the closed C-terminal loop. This is accompanied by a major conformational change of the side chain of Lys503^# of the neighboring synthase domain that strengthens the interactions of the synthase domain with the C-terminal loop and completely shields the synthase site. The concomitant conformational change of the Lys503^#-Gly505^# tripeptide places catalytic His504^# in the proper position to open the sugar and buries the linear sugar, which is now in the vicinity of the catalytic groups involved in the sugar isomerization reaction. Together with the previously reported structures of GlmS in complex with Fru6P or glucose 6-phosphate and a glutamine analogue, the new structures reveal the structural changes occurring during the whole catalytic cycle.     

Single tryptophan mutants of FtsZ: Nucleotide binding/exchange and conformational transitions

Cell division protein FtsZ cooperatively self-assembles into straight filaments when bound to GTP. A set of conformational changes that are linked to FtsZ GTPase activity are involved in the transition from straight to curved filaments that eventually disassemble. In this work, we characterized the fluorescence of single Trp mutants as a reporter of the predicted conformational changes between the GDP- and GTP-states of Escherichia coli FtsZ. Steady-state fluorescence characterization showed the Trp senses different environments and displays low solvent accessibility. Time-resolved fluorescence data indicated that the main conformational changes in FtsZ occur at the interaction surface between the N and C domains, but also minor rearrangements were detected in the bulk of the N domain. Surprisingly, despite its location near the bottom protofilament interface at the C domain, the Trp 275 fluorescence lifetime did not report changes between the GDP and GTP states. The equilibrium unfolding of FtsZ features an intermediate that is stabilized by the nucleotide bound in the N-domain as well as by quaternary protein–protein interactions. In this context, we characterized the unfolding of the Trp mutants using time-resolved fluorescence and phasor plot analysis. A novel picture of the structural transition from the native state in the absence of denaturant, to the solvent-exposed unfolded state is presented. Taken together our results show that conformational changes between the GDP and GTP states of FtsZ, such as those observed in FtsZ unfolding, are restricted to the interaction surface between the N and C domains.