Biochemical and structural characterization of a detergent-stable serine alkaline protease from seawater haloalkaliphilic bacteria

An extracellular protease from a newly isolated seawater haloalkaliphilic bacterium, haloalkaliphilic bacteria Ve₂-20-9₁ [HM047794], was purified and characterized. The enzyme is a monomer with a 37.2 kDa estimated molecular weight. It catalyzed reactions in the pH range 8–11 and performed optimally at pH 10. While maximal activity occurred at 50 °C, the temperature profile shifted from 50 to 80 °C in 1–3 M NaCl. The enzyme's thermal stability was probed using circular dichroism (CD) spectroscopy with NaCl at 50 and 70 °C. The changes in the enzyme's secondary structure were also analyzed using Fourier transform infrared spectroscopy (FTIR). The N-terminal amino acid sequence GKDGPPGLCGFFGCI exhibited low homology with other bacterial proteases, which highlights the enzyme's novelty. The enzyme was labile in anionic surfactant (1% w/v SDS) but showed stability in non-ionic surfactants (Tween 20, Tween 80 and Triton X-100 all 1% v/v), commercial detergents, and oxidizing and reducing agents. The enzyme's excellent stability in commercial detergents highlights its potential as a detergent additive.     

High hydrostatic pressure increased stability and activity of immobilized lipase in hexane

Lipases are important to high value product synthesis, modification, and enhancement. However, they are often unstable above 40 °C. While most current applications of high hydrostatic pressure (HHP) are for inactivating deleterious enzymes, there is evidence that HHP can stabilize and increase activity of some enzymes. This study examines the apparent kinetics of immobilized lipase-catalyzed synthesis of isoamyl acetate at HHP in hexane. HHP reduced thermal inactivation of lipase by up to 152% after 4 h at 80 °C and 400 MPa when compared to incubations at low pressure. No significant differences were found in activation energy (E_a) at different pressures, irrespectively of the pressurization and heating sequence, and were between 35.7 ± 3.5 and 47.8 ± 8.2 kJ mol^?1, depending on the method. In all methods utilized, activity at 63.5 and 80 °C at 400 MPa was greater (from about 20 to 96% increase) than at low pressure. Activity increased by 110% at low pressure versus a 239% increase at 350 MPa when the temperature was increased from 40 to 80 °C. Increasing pressure up to 350 MPa increased lipase activity while pressures greater than 350 MPa maintained or decreased lipase activity. Activation volume (ΔV^≠) appeared negative between ambient pressure and 200 MPa in contrast to a positive ΔV^≠ between 300 and 600 MPa. Apparent ΔV^≠ was 14.3 ± 1.7 or 15.2 ± 2.2 cm³ mol^?1 at 40 or 80 °C, respectively, between 300 and 500 MPa.     

Characterization,purification, and temperature/pressure stability of polyphenol oxidase extracted from plums (Prunus domestica)

In this study, polyphenol oxidase (PPO) was extracted from Prunus domestica and partially purified by ammonium sulfate precipitation, hydrophobic interaction chromatography, and ion exchange chromatography. The final purification step revealed a 32.81-fold purification, and the molecular mass was estimated to be 65 kDa by SDS-PAGE. The purified PPO showed enzymatic activity mainly toward five substrates, namely catechol, catechin, 4-methyl catechol, chlorogenic acid, and L-3,4-dihydroxyphenylalanine, whereas it showed no activity toward caffeic acid, ferulic acid, p-coumaric acid, p-cresol, and l-tyrosine. The optimum pH and temperature values were 6.0 and 25 °C, respectively. The enzyme showed high stability in the pH range of 5.0–7.0 and in the temperature range of 25–65 °C. The most effective inhibitors of this enzyme were found to be ascorbic acid and l-cysteine. The thermal inactivation followed a first-order kinetic model, with activation energy of E_a 150.46 ± 1.29 kJ/mol. PPO extracted from plum showed stability at high pressure, with enzyme activation at 500 MPa.     

Evaluation of structure and hydrolysis activity of Candida rugosa Lip7 in presence of sub-/super-critical CO2

This work aimed to assess the effect of sub-/super-critical CO₂ on the structure and activity of Candida rugosa Lip7 (CRL7) in its solution form. The structure was examined by SDS-PAGE gel electrophoresis, circular dichroism (CD) and fluorescence spectra photometry. Results revealed that the primary structure remained intact after sub-/super-critical CO₂ treatment, and the secondary structure altered at the pressure of 10 MPa and temperature 40 °C for 30 min incubation, but it was reflex to its native form with increasing incubation time up to 150 min under 10 MPa and 40 °C. Meanwhile, the tertiary structure via fluorescence spectra analysis showed that the intensity of the maximal emission wavelength at 338 nm decreased under the conditions of 10 MPa and 40 °C for 150 min. Furthermore, the residue hydrolysis activity and kinetics constants (V_max and K_m) of CRL7 treated with sub-/super-critical CO₂ were also investigated. In cases of 6 MPa and 35 °C, or 10 MPa and 40 °C for 30 min, activity variance of CRL7 was maybe caused by its secondary structure alteration. But in case of 10 MPa and 40 °C for 150 min, the tertiary structure change was perhaps responsibility for CRL7 activity enhancement.     

Decay and termite resistance,water absorption and swelling of thermally compressed wood panels

This study evaluated decay and termite resistance of thermally compressed pine wood panels under pressure at either 5 or 7 MPa and either 120 or 150 °C for 1 h. Wood specimens from the panels were exposed to laboratory decay resistance tests by using the wood degrading fungi, Gloeophyllum trabeum and Trametes versicolor. The thermal compression process caused increases in density and decreases in thickness of the panels; however, laboratory decay resistance tests revealed that thermally compressed wood was not resistant against the wood degrading fungi tested. More interesting results were found in laboratory termite resistance tests by using the Eastern subterranean termites, Reticulitermes flavipes. As pressure and temperature applied to the specimens increased to 7 MPa and 120 °C, mass losses in the specimens gradually decreased in comparison with control specimens. However, the specimens compressed at 7 MPa and 150 °C showed higher mass losses when compared to the specimens compressed at 7 MPa and 120 °C. The lowest water absorption and swelling rates were seen in the specimens exposed to a pressure of 7 MPa at 120 °C. The thermal compression process at 7 MPa and 150 °C resulted in the highest water absorption and swelling in the specimens.     

A novel cold-active β-d-galactosidase with transglycosylation activity from the Antarctic Arthrobacter sp. 32cB – Gene cloning,purification and characterization

A gene encoding a novel β-d-galactosidase from the psychrotolerant Antarctic bacterium Arthrobacter sp. 32cB was isolated, cloned and expressed in Escherichia coli. The active form of recombinant β-d-galactosidase consists of two subunits with a combined molecular weight of approximately 257 kDa. The enzyme's maximum activity towards o-nitrophenyl-β-d-galactopyranoside was determined as occurring at 28 °C and pH 8.0. However, it exhibited 42% of maximum activity at 10 °C and was capable of hydrolyzing both lactose and o-nitrophenyl-β-d-galactopyranoside at that temperature, with K_m values of 1.52 and 16.56 mM, and k_cat values 30.55 and 31.84 s⁻¹, respectively. Two units of the enzyme hydrolyzed 90% of the lactose in 1 mL of milk at 10 °C in 24 h. The transglycosylation activity of Arthrobacter sp. 32cB β-d-galactosidase was also examined. It synthesized galactooligosaccharides in a temperature range from 10 to 30 °C. Moreover, it catalyzed the synthesis of heterooligosaccharides such as lactulose, galactosyl-xylose and galactosyl-arabinose, alkyl glycosides, and glycosylated salicin from lactose and the appropriate acceptor at 30 °C. The properties of Arthrobacter sp. 32cB β-d-galactosidase make it a candidate for use in the industrial removal of lactose from milk and a promising tool for the glycosylation of various acceptors, especially those which are thermosensitive.     

Bacteriophage phi11 lysin: Physicochemical characterization and comparison with phage phi80α lysin

Phage lytic enzymes are promising antimicrobial agents. Lysins of phages phi11 (LysPhi11) and phi80α (LysPhi80α) can lyse (destroy) cells of antibiotic-resistant strains of Staphylococcus aureus. Stability of enzymes is one of the parameters making their practical use possible. The objectives of the study were to investigate the stability of lysins of phages phi11 and phi80α in storage and functioning conditions, to identify optimum storage conditions and causes of inactivation. Stability of the recombinant LysPhi11 and LysPhi80α was studied using turbidimetry. CD-spectroscopy, dynamic light scattering, and electrophoresis were used to identify causes of inactivation. At 37 °C, pH 7.5 and concentration of NaCl not higher than 150 mM, LysPhi11 molecules contain a high percentage of random coils (43%). However, in spite of this the enzyme has high activity (0.4–0.8 OD_600 nm s⁻¹ mg⁻¹). In storage conditions (4 °C and 22 °C, pH 6.0–9.0, 10–500 mM NaCl) LysPhi11 is inactivated by a monomolecular mechanism. The optimum storage conditions for LysPhi11 (4 °C, pH 6.0–7.5, 10 mM NaCl) were selected under which the time of the enzyme half-inactivation is 120–160 days. LysPhi80α stability is insufficient: at 37 °C the enzyme loses half of its activity almost immediately; at 4 °C and 22 °C the time of half-inactivation of LysPhi80α varies in the range from several hours to 3 days. Despite the common properties in the manifestation of antistaphylococcal activity the kinetic behavior of the enzymes is different. LysPhi11 is a more promising candidate to be used as an antimicrobial agent.     

Development response of Spodoptera exigua to eight constant temperatures: Linear and nonlinear modeling

Temperature-dependent development of Spodoptera exigua (Hübner) were evaluated at eight constant temperatures of 12, 15, 20, 25, 30, 33, 34 and 36 °C with a variation of 0.5 °C on sugar beet leaves. No development occurred at 12 °C and 36 °C. Total developmental time varied from 120.50 days at 15 °C to 14.50 days at 33 °C. As temperature increased from 15 °C to 33 °C, developmental rate (1/developmental time) of S. exigua increased but declined at 34 °C. The lower temperature threshold (T_min) was estimated to be 12.98 °C and 12.45 °C, and the thermal constant (K) was 294.99 DD and 311.76 DD, using the traditional and Ikemoto–Takai linear models, respectively. The slopes of the Ikemoto–Takai linear model for different immature stages were different, violating the assumption of rate isomorphy. Data were fitted to three nonlinear models to predict the developmental rate and estimate the critical temperatures. The T_min values estimated by Lactin-2 (12.90 °C) and SSI (13.35 °C) were higher than the value estimated by Briere-2 (8.67 °C). The estimated fastest development temperatures (T_fast) by the Briere-2, Lactin-2 and SSI models for overall immature stages development of S. exigua were 33.4 °C, 33.9 °C and 32.4 °C, respectively. The intrinsic optimum temperature (T_Φ) estimated from the SSI model was 28.5 °C, in which the probability of enzyme being in its native state is maximal. The upper temperature threshold (T_max) values estimated by these three nonlinear models varied from 34.00 °C to 34.69 °C. These findings on thermal requirements can be used to predict the occurrence, number of generations and population dynamics of S. exigua.     

Can acclimation of thermal tolerance,in adults and across generations,act as a buffer against climate change in tropical marine ectotherms?

Thermal acclimation capacity was investigated in adults of three tropical marine invertebrates, the subtidal barnacle Striatobalanus amaryllis, the intertidal gastropod Volegalea cochlidium and the intertidal barnacle Amphibalanus amphitrite. To test the relative importance of transgenerational acclimation, the developmental acclimation capacity of A. amphitrite was investigated in F₁ and F₂ generations reared at a subset of the same incubation temperatures. The increase in CT_max (measured through loss of key behavioural metrics) of F₀ adults across the incubation temperature range 25.4–33.4 °C was low: 0.00 °C (V. cochlidium), 0.05 °C (S. amaryllis) and 0.06 °C (A. amphitrite) per 1 °C increase in incubation temperature (the acclimation response ratio; ARR). Although the effect of generation was not significant, across the incubation temperature range of 29.4–33.4 °C, the increase in CT_max in the F₁ (0.30 °C) and F₂ (0.15 °C) generations of A. amphitrite was greater than in the F₀ (0.10 °C). These correspond to ARR's of 0.03 °C (F₀), 0.08 °C (F₁) and 0.04 °C (F₂), respectively. The variability in CT_max between individuals in each treatment was maintained across generations, despite the high mortality of progeny. Further research is required to investigate the potential for transgenerational acclimation to provide an extra buffer for tropical marine species facing climate warming.     

In vivo temperature limitations of photosynthesis in Phaseolus vulgaris L

The purpose of this study was to evaluate the temperature response of photosynthesis in two common bean genotypes differing in crop yield when grown under warm conditions. The cultivar Nobre is sensitive to high temperatures, whereas Diplomata shows better crop yield under high temperatures. Plants were grown in a greenhouse prior to transferring to a controlled environment cabinet for the temperature treatments. In a first experiment, 30 days-old plants were subjected to a short exposure (1 day) at temperatures that varied from 9 °C to 39 °C. Diplomata had lower net CO₂ assimilation rate (A) at 15 °C and 21 °C, but higher from 27 °C to 39 °C. Photosynthetic parameters calculated from modeling the response of A to the intercellular CO₂ concentration suggested that the different temperature responses of the two genotypes are caused by different rates of diffusion of CO₂ to the assimilation site, not by differences in biochemical limitations of photosynthesis. While stomatal conductance (g_s) did not differ between the genotypes, mesophyll conductance (g_m) was slightly greater for Nobre at 15 °C, but much higher in Diplomata from 21 °C to 39 °C. In a second experiment, no difference was observed in biomass accumulation between the two genotypes after growth for 24 days under a 35/20 °C (day/night) regime. Hence, the differences in photosynthesis did not cause variation in plant growth at the vegetative stage. The differential genotypic response of g_m to temperature suggests that g_m might be an important limitation to photosynthesis in Nobre, the common bean genotype sensitive to elevated temperature. However, more studies are needed employing other methods for g_m evaluation to validate these results.     

Photosynthetic pigments,morphology and leaf gas exchange during ex vitro acclimatization of micropropagated CAM Doritaenopsis plantlets under relative humidity and air temperature

The effect of relative humidity (RH) and temperature on CO₂ assimilation (An), stomatal conductance (Sc), transpiration rate (Tr), chlorophyll content, fresh and dry weight, leaf length, leaf area, leaf width, formation of new root and survival rate have been assayed in Doritaenopsis in growth chamber after 1 month of acclimatization. Reduced growth was observed at below and above 25 °C whereas it was increased with increasing humidity. Relative water content (RWC) was decreased at 50% and 70% humidity after second day of transfer and recovered completely with the progression of acclimatization. RWC also reduced at high temperature but recovered slowly and a gradual decrease of RWC was observed at 15 °C. A visual symptom of severe leaf tip burn was observed at 50–70% humidity and at 35 °C during acclimatization. At 15 °C and 50% humidity sudden decrease of photosynthetic efficiency (F_v/F_m) was observed, which could not recover in temperature treated plantlets during acclimatization period. Chlorophyll content increased with increasing humidity and at 15 and 35 °C chlorophyll content was decreased compared to 25 °C. Chlorophyll a/b ratio was unchanged while total chlorophyll/carotenoids ratio was increased from low to high temperature. Exposure of plantlets to high temperature led to a noticeable decrease in An, Sc and Tr, and at 15 °C they were more decreased whereas significant differences were not observed in the parameters tested under humidity after 25 days of acclimatization. During daytime at 15 °C, increase in An, Sc and Tr indicates the plantlets adaptability in the new environment. The peroxidase activity remained unaffected in all humidity stress whereas low temperature increased the peroxidase activity compared to high temperature. These finding suggests that photosynthetic properties was greatly affected by air temperature conditions with a reduction of An, Sc and Tr at 15 and 35 °C compared to humidity stress that played a greater role in limiting photosynthesis.     

Purification and partial characterization of two new cold-adapted lipases from mesophilic Geotrichum sp. SYBC WU-3

Two cold-adapted lipases (Lipase-A and Lipase-B in the paper) of mesophilic Geotrichum sp. SYBC WU-3 were purified by using (NH₄)₂SO₄ fractionation, chromatography separation on a DEAE-cellulose-32 column and a Sephadex G100 column. The molecular mass of Lipase-A and Lipase-B were determined to be approximately 41.1 and 35.8 kDa, respectively by SDS-PAGE. The optimum temperature for the activity of Lipase-A was found to be 20 °C, and that of Lipase-B was 15 °C. Lipase-A and Lipase-B had good stability when temperature was below 40 °C. Both the optimum pH for the activity of the lipases was 9.5. Lipase-A retained about 80% of its activity when pH was between 3 and 6 and Lipase-B maintained over 80% activity in the pH range of 3–8. The two lipases showed hydrolysis efficiency to various p-nitrophenyl esters, but they were more active with shorter p-nitrophenyl esters (C2 and C4).     

Role of calcium in alleviating effect of salinity on germination of Phragmites karka seeds

Phragmites karka (Retz.) Trin, ex. steud, a perennial reed with creeping rhizome from the family Poaceae, is distributed as pure population in brackish water swamps. Populations primarily propagate using ramets but also produce numerous seeds which form part of the seed bank after dispersal and are exposed to extremes of temperature, drought, and salinity stress. Seeds were germinated under a range of salinity (0, 100, 200, 300, 400, 500 mM NaCl) and temperature (10/20 °C, 15/25 °C, 20/30 °C, 25/35 °C, night/day) regimes in 12 h light:12 h dark photoperiod or in complete darkness with 0, 5, 10, 25 mM CaCl₂. Salinity, absence of light and high temperature (25/35 °C) reduced germination while calcium generally reversed this effect, more so at cooler temperature regimes. Calcareous soil around Karachi would help alleviate the salinity effect on the germination of P. karka and facilitate its survival.     

Glass transition temperatures and water sorption isotherms of cassava starch

The effect of water content on the glass transition temperatures of cassava starch was determined by differential scanning calorimetry (DSC) and dynamic mechanical thermal analysis (DMTA). Samples were transformed to the amorphous state by compression molding at high temperature (as demonstrated by wide angle X-ray diffraction, WAXS), and then the samples were moisture conditioned. Both DSC and DMTA showed that water anti-plasticized cassava starch at lower moisture contents, and plasticized it at higher water contents. Samples with higher moisture contents stored at room temperature, 45 °C and 80 °C underwent retrogradation as indicated by WAXS. Sorption isotherms of cassava starch showed that for a_w values lower than around 0.85, the sorption capacity decreased with increasing temperature; while the opposite behavior was observed at a_w > 0.85. This inversion point (a_w = 0.85) was attributed to the fact that more active sites were exposed to the adsorption processes, due to the enhanced molecular mobility promoted in the amorphous regions by starch crystallization.     

Continuous degradation of maltose by enzyme entrapment technology using calcium alginate beads as a matrix

Maltase from Bacillus licheniformis KIBGE-IB4 was immobilized within calcium alginate beads using entrapment technique. Immobilized maltase showed maximum immobilization yield with 4% sodium alginate and 0.2 M calcium chloride within 90.0 min of curing time. Entrapment increases the enzyme–substrate reaction time and temperature from 5.0 to 10.0 min and 45 °C to 50 °C, respectively as compared to its free counterpart. However, pH optima remained same for maltose hydrolysis. Diffusional limitation of substrate (maltose) caused a declined in V_max of immobilized enzyme from 8411.0 to 4919.0 U ml^?1 min^?1 whereas, K_m apparently increased from 1.71 to 3.17 mM ml^?1. Immobilization also increased the stability of free maltase against a broad temperature range and enzyme retained 45% and 32% activity at 55 °C and 60 °C, respectively after 90.0 min. Immobilized enzyme also exhibited recycling efficiency more than six cycles and retained 17% of its initial activity even after 6th cycles. Immobilized enzyme showed relatively better storage stability at 4 °C and 30 °C after 60.0 days as compared to free enzyme.     

Effect of heating rate on pDNA production by E. coli

The effects of heating rate (HR) on the performance of two-phase (batch followed by fed-batch) high cell-density cultivations (HCDC) of E. coli DH5α for the production of plasmid DNA (pDNA) were investigated. Optimal temperatures for the HCDC, as selected from shake flask experiments at constant temperatures between 30 and 45 °C, were 35 °C for biomass accumulation in the batch phase and 42 °C for inducing pDNA replication during the fed-batch. In HCDC the temperature was increased at HR of 0.025, 0.05, 0.10 and 0.25 °C/min and the performance of the cultivations were compared to a HCDC run at constant temperature (35 °C). Compared to constant 35 °C, heat-induced HCDC accumulated up to 50% less biomass within the same cultivation time and acetate and glucose accumulated to high concentrations. The overall specific productivity (Q_P) and average pDNA yield (Y_p/x) in HCDC at 35 °C were 0.22 ± 0.02 mg/g h and 5.3 ± 0.00 mg/g, respectively. Such parameters were maximum at a HR of 0.05 °C/min, reaching 0.56 ± 0.06 mg/g h and 9.3 ± 0.6 mg/g, respectively. At HR above 0.5 °C/min, Y_p/x remained relatively constant, whereas Q_P tended to decrease. The supercoiled pDNA fraction remained around 80% at all HR. Bioreactors were equipped with a capacitance/conductivity probe. In all cases biomass concentration correlated closely with the capacitance signal and acetate and glucose accumulation was accompanied by an increase in the conductivity signal. Thus, it was possible to calculate acetate and biomass concentrations, as well as μ, from online capacitance and conductivity signals using estimators. Altogether, in this study it was shown that it is possible to maximize pDNA productivity by choosing an appropriate HR and that relevant parameters can be estimated by capacitance/conductivity signals, which are useful for better process control and development.     

Copper,zinc superoxide dismutase of Curcuma aromatica is a kinetically stable protein

This study details on cloning and characterization of Cu,Zn superoxide dismutase (Ca–Cu,Zn SOD) from a medicinally important plant species Curcuma aromatica. Ca–Cu,Zn SOD was 692 bp with an open reading frame of 459 bp. Expression of the gene in Escherichia coli cells followed by purification yielded the enzyme with K_m of 0.047 ± 0.008 μM and V_max of 1250 ± 24 units/mg of protein. The enzyme functioned (i) across a temperature range of −10 to +80 °C with temperature optima at 20 °C; and (ii) at pH range of 6–9 with optimum activity at pH 7.8. Ca–Cu,Zn SOD retained 50% of the maximum activity after autoclaving, and was stable at a wide storage pH ranging from 3 to 10. The enzyme tolerated varying concentrations of denaturating agent, reductants, inhibitors, trypsin, was fairly resistant to inactivation at 80 °C for 180 min (k_d, 6.54 ± 0.17 × 10⁻³ min⁻¹; t_1/2, 106.07 ± 2.68 min), and had midpoint of thermal transition (T_m) of 70.45 °C. The results suggested Ca–Cu,Zn SOD to be a kinetically stable protein that could be used for various industrial applications.     

Ecophysiological requirements on seed germination of a Mediterranean perennial grass (Stipa tenacissima L.) under controlled temperatures and water stress

Stipa tenacissima L. (alpha grass) steppes are one of the most representative ecosystems in arid Mediterranean ecosystems. On the one hand these steppes, which are perpetually exposed to climate and strong anthropogenic pressure, have undergone severe degradation. On the other hand, the ability of S. tenacissima to regenerate naturally is significantly reduced. In this study the germination response and seedling emergence of S. tenacissima are examined in relation to the main environmental factors (water stress and temperature) under laboratory-controlled conditions. The main aim of this paper was to investigate the influence of temperature over a temperature range (10 °C–30 °C) and water stress induced by the solutions of polyethylene glycol (PEG)-6000 (0 to − 1.6 MPa) for a period of 30 days, on the germination behavior of S. tenacissima seeds. The results showed that temperatures between 10° and 20 °C seem to be favorable for the germination of this species, with optimum temperatures among accessions found in 20 °C. When seeds were water-stressed, germination severely decreased at − 0.8 MPa, indicating that the accession resistance limits to the water stress, and was completely inhibited at − 1.6 MPa. Consequently, the final germination percentage (FGP) decreased and the mean time germination (MTG) increased. Based on the empirical data of the germination rate, we estimated that the parameters of the thermal time and hydrotime models showed different values in all accessions which proves the difference between accession adaptive capacities.     

Stability of the intra- and extracellular toxins of Prymnesium parvum using a microalgal bioassay

Prymnesium parvum produces a variety of toxic compounds, which affect other algae, grazers and organisms at higher trophic levels. Here we provide the method for development of a sensitive algal bioassay using a microalgal target, Teleaulax acuta, to measure strain variability in P. parvum toxicity, as well as the temporal stability of both the intracellular and the extracellular lytic compounds of P. parvum. We show high strain variation in toxicities after 3 h incubation with LC₅₀s ranging from 24 to 223 × 10³ cells ml⁻¹. Most importantly we prove the necessity of testing physico-chemical properties of P. parvum toxins before attempting to isolate and characterize them. The extracellular toxin in the supernatant is highly unstable, and it loses significant lytic effects after 3 days despite storage at −20 °C and after only 24 h stored at 4 °C. However, when stored at −80 °C, lytic activity is more easily maintained. Reducing oxidation by storing the supernatant with no headspace in the vials significantly slowed loss of activity when stored at 4 °C. We show that the lytic activity of the intracellular toxins, when released by sonication, is not as high as the extracellular toxins, however the stability of the intracellular toxins when kept as a cell pellet at −20 °C is excellent, which proves this is a sufficient storage method for less than 3 months. Our results provide an ecologically appropriate algal bioassay to quantify lytic activity of P. parvum toxins and we have advanced our knowledge of how to handle and store the toxins from P. parvum so as to maintain biologically relevant toxicity.     

β-Galactosidase of Aspergillus oryzae immobilized in an ion exchange resin combining the ionic-binding and crosslinking methods: Kinetics and stability during the hydrolysis of lactose

In this work, the hydrolysis kinetics of lactose by Aspergillus oryzae β-galactosidase was studied using the ionic exchange resin Duolite A568 as a carrier. The enzyme was immobilized using a β-galactosidase concentration of 16 g/L in pH 4.5 acetate buffer and an immobilization time of 12 h at 25 ± 0.5 °C. Next, the immobilized β-galactosidase was crosslinked using glutaraldehyde concentration of 3.5 g/L for 1.5 h. The influence of lactose concentration was studied for a range of 5–140 g/L, and the Michaelis–Menten model was fitted well to the experimental results with V_m and K_m values of 0.71 U and 35.30 mM, respectively. The influence of the product galactose as an inhibitor on the hydrolysis reaction was studied. The model that was best fitted to the experimental results was the competitive inhibition by galactose with V_m, K_m and K_i values of 0.77 U, 35.30 mM and 27.44 mM, respectively. The influence of temperature on the enzymatic activity of the immobilized enzyme was studied in the range of 10–80 °C, in which the temperature of the maximum activity was 60 °C, with an activation energy of 5.32 kcal/mol of lactose, using an initial concentration of lactose of 50 g/L in a pH 4.5 sodium acetate buffer solution. The thermal stability of the immobilized biocatalyst was determined to be in the range 55–65 °C. The first-order model described well the kinetics of thermal deactivation for all the temperatures studied. The activation energy of thermal deactivation from immobilized biocatalyst was 66.48 kcal/mol with a half-life of 8.9 h at 55 °C.