Lipase immobilization on O-propargyl and O-pentynyl dextrans and its application for the synthesis of click beetle pheromones

Lipase of Rhizopus arrhizus was immobilized on O-propargyl dextran (PgD) and O-pentynyl dextran (PyD). Compared with Lewatit VP OC 1600 cation ion exchange resin, wood shaves, fuller earth, silica and alumina, PgD with degree of substitution (DS) of 0.68 and a surface of 10 m²/g was found to be the most effective immobilization support and an excellent biocatalyst for esterification reactions in organic solvents as the synthesis of click beetle pheromone geranyl octanoate. PyD (DS 0.44) with a surface of 3.3 m²/g was of similar high efficiency. For the enzymatic esterification the optimum concentration of geraniol and octanoic acid was 0.4 mol L^?1 each. The biocatalyst worked the best in hexane at a moisture level of 0.02%. The enzyme could be repeatedly used and conversion dropped from 80% to 70% after four cycles, while reaction rate even increased when repeatedly employed.     

Synthesis of geranyl acetate in non-aqueous media using immobilized Pseudomonas cepacia lipase on biodegradable polymer film: Kinetic modelling and chain length effect study

Pseudomonas cepacia lipase (PCL) was immobilized on ternary blend biodegradable polymer made up of polylactic acid (PLA), chitosan (CH), and polyvinyl alcohol (PVA). Immobilized biocatalyst was characterized using scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), % water content, protein and lipase activity assay. The lipase activity assay showed enhanced activity of immobilized lipase than crude lipase. Higher half life time (t_1/2) and lower deactivation rate constant (K_d) was found for the n-hexane among various tested solvent. Influence of various reaction parameters on enzyme activity were studied in detail. When geraniol (1 mmol) and vinyl acetate (4 mmol) in toluene (3 mL) were reacted with 50 mg immobilized lipase at 55 °C; then 99% geraniol was converted to geranyl acetate after 3 h. Various kinetic parameters such as r_max, K_i(A), K_m(A), K_m(B) were determined using non-linear regression analysis for ternary-complex and Bi–Bi ping-pong mechanism. The kinetic study showed that reaction followed ternary-complex mechanism with inhibition by geraniol. Activation energy (Ea) was found to be lower for immobilized lipase (13.76 kCal/mol) than crude lipase (19.9 kCal/mol) indicating better catalytic efficiency of immobilized lipase. Immobilized biocatalyst demonstrated 4 fold increased catalytic activity than crude lipase and recycled five times.     

Enhanced selective oxidation of trimethylolpropane to 2,2-bis(hydroxymethyl)butyric acid using Corynebacterium sp. ATCC 21245

2,2-Bis(hydroxymethyl)butyric acid (BHMB) is an important multifunctional chemical for the emerging bio-based polymer industry. It can be produced from trimethylolpropane (TMP) by selective oxidation using growing cells of Corynebacterium sp. ATCC 21245. However, this process is limited by the low volumetric productivity and low concentration of the final product. In the present study, we performed sequential batch operation with cell recycling in media containing glycerol, acetic acid, and increasing concentrations of yeast extract. This approach enhanced the conversion of 10 and 15 g/L TMP to 11.0 and 16.3 g/L BHMB at rates of 0.50 and 0.20 g/L^.h, respectively. Applying a cell bleeding strategy resulted in an overall 10-fold improvement in productivity. The consequently prolonged biocatalyst viability resulted in a quantitative conversion of 20 g/L TMP to 22.3 g/L BHMB and a yield of 1.10 g_BHMB/g_TMP (100% molar yield). This work facilitates further studies of the selective oxidation on other industrially important polyols.     

Immobilization of Candida rugosa lipase on hexagonal mesoporous silicas and selective esterification in nonaqueous medium

Candida rugosa lipases (CRLs) immobilized by physical adsorption, cross-linking and covalent binding methods on a MSU-H type mesoporous silica previously modified organically by different strategies, respectively, were examined as biocatalysts for esterification of conjugated linoleic acid (CLA) and ethanol in nonaqueous medium. MSU-H silica was modified by nonionic surfactant of triblock copolymer Pluronic P123, amino-functionalization and glutaraldehyde-grafting and confirmed by FT-IR analysis. Interaction mechanisms of CRLs and supports involve covalent and non-covalent interactions including electrostatic repulsion and hydrophobic interaction at pH 7. The immobilized CRLs containing surfactant were prepared by cross-linking via entrapping CRL aggregates inside the pores of silicas. The surfactant located inside the silicas could interfacially activate the immobilized CRLs and favored catalytic esterification. The biocatalyst containing 38 wt.% of surfactant afforded 1111.1 U/mg of specific activity about eight times higher than soluble CRL, and maximal 56.7% of total CLA esterification with 96.5% of 9c, 11t-CLA isomer esterification degree. The immobilized-CRL with 64.5 mg/g of loading amount of protein exhibited maximal hydrolytic activity of 2945.3 U/g-support for grafting glutaraldehyde. This derivative showed a high level of esterification activity and operational stability and remained 43.2–46.9% of total esterification for 32 h consecutive four runs.     

Effect of ionic liquids,organic solvents and supercritical CO2 pretreatment on the conformation and catalytic properties of Candida rugosa lipase

The objective of this work is to assess the structure and activity of Candida rugosa lipase (CRL) pretreated with seventeen ionic liquids (ILs), five organic solvents and super-critical carbon dioxide (SC-CO₂). The results revealed that anion selection of ILs showed generally much greater effects on CRL esterification activity than cation choice, and CRL pretreated by ILs with strong water miscible properties showed very low esterification activity. The highest CRL activity treated with ILs [Hmim][PF6] was obtained with the value of 45078.0 U/g-protein. Furthermore, the CRL activities pretreated with five conventional organic solvents were also examined and the values increased with the log P decrease of organic solvents when log P was lower than 2.0. Finally, the CRL activities were respectively 1.2- and 1.3-fold higher over the untreated ones after pretreatment with sub- and super-critical CO₂ under the pressures of 6 MPa and 15 MPa at 40 °C for 20 min. Further analyses via FT-IR demonstrated that the high activity of CRL pretreated with ILs, organic solvents and SC-CO₂ was probably caused by the changes of CRL secondary structure. In conclusion, the results in this work will be helpful for us to choose the suitable reaction medium in CRL biocatalysis and biotransformation reactions.     

Lipase-catalyzed synthesis of capsiate analog using vanillyl alcohol and conjugated linoleic acid under vacuum system

This study focused on the application of vacuum system to synthesize capsiate analogs. The capsiate analogs containing conjugated linoleic acid (CLA) was successfully synthesized in solvent free system via lipase-catalyzed esterification. This esterification was carried out using vanillyl alcohol and CLA as substrates, and Lipozyme RM IM from Rhizomucor miehei as a biocatalyst. The best reaction condition was a molar ratio of 1:2 (vanillyl alcohol to CLA), a reaction temperature of 50 °C, and a lipase loading of 10% (w/w, based on total substrates). Application of vacuum increased the yield of capsiate analog as well as the reaction rate. When the vacuum levels were between 66.7 kPa and 1.3 kPa, an equilibrium yield of 100 mol% was achieved. The maximum yield was approached after only 3 h of reaction at the vacuum levels of higher than 13.3 kPa. The content of 9c,11t-CLA in capsiate analog synthesized was higher than that of 10t,12c-CLA.     

Evaluation of structure and hydrolysis activity of Candida rugosa Lip7 in presence of sub-/super-critical CO2

This work aimed to assess the effect of sub-/super-critical CO₂ on the structure and activity of Candida rugosa Lip7 (CRL7) in its solution form. The structure was examined by SDS-PAGE gel electrophoresis, circular dichroism (CD) and fluorescence spectra photometry. Results revealed that the primary structure remained intact after sub-/super-critical CO₂ treatment, and the secondary structure altered at the pressure of 10 MPa and temperature 40 °C for 30 min incubation, but it was reflex to its native form with increasing incubation time up to 150 min under 10 MPa and 40 °C. Meanwhile, the tertiary structure via fluorescence spectra analysis showed that the intensity of the maximal emission wavelength at 338 nm decreased under the conditions of 10 MPa and 40 °C for 150 min. Furthermore, the residue hydrolysis activity and kinetics constants (V_max and K_m) of CRL7 treated with sub-/super-critical CO₂ were also investigated. In cases of 6 MPa and 35 °C, or 10 MPa and 40 °C for 30 min, activity variance of CRL7 was maybe caused by its secondary structure alteration. But in case of 10 MPa and 40 °C for 150 min, the tertiary structure change was perhaps responsibility for CRL7 activity enhancement.     

Biocatalytic ethanolysis of palm oil for biodiesel production using microcrystalline lipase in tert-butanol system

Biocatalytic synthesis is a promising environmentally friendly process for the production of biodiesel, a sustainable alternative fuel from renewable plant resources. In order to develop an economical heterogeneous biocatalyst, protein-coated microcrystals (PCMCs) were prepared from a commercial enzyme preparation from a recombinant Aspergillus strain expressing Thermomyces lanuginosus lipase and used for synthesis of biodiesel from palm olein by ethanolysis. Reaction parameters, including catalyst loading, temperature, and oil/alcohol molar ratio have been systematically optimized. Addition of tert-butanol was found to markedly increase the biocatalyst activity and stability resulting in improved product yield. Optimized reactions (20%, w/w PCMC-lipase to triacylglycerol and 1:4 fatty acid equivalence/ethanol molar ratio) led to the production of alkyl esters from palm olein at 89.9% yield on molar basis after incubation at 45 °C for 24 h in the presence of tert-butanol at a 1:1 molar ratio to triacylglycerol. Crude palm oil and palm fatty acid distillate were also efficiently converted to biodiesel with 82.1 and 75.5% yield, respectively, with continual dehydration by molecular sieving. Operational stability of PCMC-lipase could be improved by treatment with tert-butanol allowing recycling of the biocatalyst for at least 8 consecutive batches with only slight reduction in activity. This work thus shows a promising approach for biodiesel synthesis with microcrystalline lipase which could be further developed for cost-efficient industrial production of biodiesel.     

Continuous production of ellagic acid in a packed-bed reactor

Ellagic acid is a high-value bioactive compound that is used in the food, cosmetic and pharmaceutical industries. The aim of this work was to develop a continuous system for ellagic acid production. Ellagitannase produced by solid-state fermentation and attached to polyurethane foam particles was used as a biocatalyst in a continuous bioreactor for the hydrolysis of ellagitannins from pomegranate by-product. A packed-bed reactor containing the biocatalyst (22.22 Units per gram of dry solid, U gds⁻¹) was fed with a pomegranate ellagitannins solution (0.1%, w/v) at a flow rate of 0.27 mL min⁻¹ at 60 °C. The bioreactor completed several biotransformations while maintaining the hydrolysis rate (60%) with a half-life of 10 continuous cycles of ellagic acid production. Volumetric productivity and ellagic acid yield were 1.09 g L⁻¹ h⁻¹ and 235.89 mg g⁻¹ of pomegranate ellagitannins during the first 70 min of hydrolysis, respectively. The developed biocatalyst showed good operational and mechanical stability and may be successfully used for ellagitannin hydrolysis in a continuous system. This is the first report of high-yield continuous production of ellagic acid using an auto-immobilized enzyme.     

Effect of combined ensiling of sorghum and soybean with or without molasses and lactobacilli on silage quality and in vitro rumen fermentation

Two sorghum (Sorghum bicolor (L.) Moench) varieties (SG₁ & SG₂), with the former showing higher grain and total DM yield, but also increased tannin contents compared to the latter, and one soybean (Glycine max (L.) Merr.) variety (INCASOY-35) were sown, harvested (at pasty grain state), chopped and ensiled (CIAP, Cuba). Silages were made in following combinations: either SG₁ or SG₂ combined with soybean in two proportions (0.4 and 0.6). All silages were prepared with or without molasses (3.5% of fresh material) and Lactobacillus sp. as inoculant (3 × 10⁵ colony forming units/g). Silage quality parameters included pH, ammonia, lactate, acetate, butyrate and water soluble carbohydrates content. Further, both fresh and ensiled materials were incubated in vitro with buffered rumen fluid to study the fermentation characteristics. Silage of a good quality could be produced with both sorghum varieties alone, but combined silages showed improved quality compared to soybean silage (p<0.05 for all quality characteristics). Addition of molasses and bacterial inoculant further improved silage quality (p<0.05 for all quality characteristics). In vitro incubation (24 h) of ensiled material resulted in lower acetate and higher propionate proportion compared to fresh forages. However, ensiling without molasses and inoculant reduced in vitro short chain fatty acid production and hence the apparent rumen degradability of organic mater as well as the fermentation rate. As expected, a higher proportion of sorghum increased the molar propionate proportion and the fractional fermentation rate, whereas ammonia (mmol/L) concentrations were reduced. SG₁ silages produced higher molar propionate proportions, lower acetate proportions and ammonia concentrations.     

Rumen microbial responses in fermentation characteristics and production of CLA and methane to linoleic acid in associated with malate or fumarate

An in vitro incubation in batch was conducted to investigate the effect of propionate precursor (malate or fumarate) on fermentation characteristics, and production of CLA and methane by rumen microbes when incubated with linoleic acid (C_18:2). Sixty milligrams of C_18:2 alone (LA), 60 mg C_18:2 with 24 mM malic acid (M-LA), or 60 mg C_18:2 with 24 mM fumaric acid (F-LA) was added to 150 ml culture solution consisting of 75 ml strained rumen fluid and 75 ml McDougall's artificial saliva. Culture solution for incubation was also made without malate, fumarate, and C_18:2 (control). Two grams of feed consisting of 1.4 g concentrate and 0.6 g ground alfalfa (DM basis) was also added to the culture solution of each treatment. An in vitro incubation in batch was made anaerobically in a shaking incubator for up to 12 h at 39 °C.The pH of the culture solution was increased (P<0.0001) in M-LA or F-LA treatments from 3 h to 12 h compared with the control and LA treatments. At 12 h incubation, the concentration of total VFA in the culture solution was higher (P<0.01) in M-LA and F-LA than in control and LA treatments. Concentration of C₃ by M-LA and F-LA was increased at 3 h (P<0.01), 6 h (P<0.01) and 12 h (P<0.01) compared with control and LA. However, no difference in C₃ concentration was observed between control and LA, or between M-LA and F-LA. Accumulated total gas produced for up to 12 h incubation was increased (P<0.01) by M-LA or F-LA compared with the control. Accumulated total methane produced for up to 12 h incubation, however, was greatly reduced (P<0.01) by all the supplements compared with control, and its production from M-LA or F-LA was smaller than the LA. The M-LA or F-LA also increased (P<0.05–<0.001) the concentrations of cis9, trans11-CLA for all incubation times and trans10, cis12-CLA at 1 h (P<0.01), 3 h (P<0.05), and 12 h (P<0.05) incubation times compared with LA.It can be concluded that malate and fumarate, as propionate precursors, act as alternative electron sinks and may compete with CH₄ generation and bio-hydrogenation of C_18:2 in the utilization of metabolic H₂. The highest CLA concentration at the early incubation stage (1 h) was accompanied by reduced propionate proportion. Linoleic acid is also considered one of the potential alternatives to suppress CH₄ generation.     

Laccase immobilization on mesostructured cellular foams affords preparations with ultra high activity

Extracellular laccase produced by the wood-rotting fungus Cerrena unicolor was immobilized covalently on the mesostructured siliceous cellular foams (MCFs) functionalised using various organosilanes with amine and glycidyl groups. The experiments indicated that laccase bound via glutaraldehyde to MCFs modified using 2-aminoethyl-3-aminopropyltrimethoxysilane remains very active. In the best biocatalyst activity was about 42,700 U mL^?1 carrier (66,800 U mg^?1 bound protein), and hence significantly higher than ever reported before. Optimisation of the immobilization procedure with respect to protein concentration, pH of coupling mixture and the enzyme purity afforded the biocatalyst with activity of about 90,980 U mL^?1. For the best preparation, thermal- and pH-stability, and activity profiles were determined. Experiments carried out in a batch reactor showed that k_cat/K_m for immobilized enzyme (0.88 min^?1 μM^?1) was acceptable lower than the value obtained for the native enzyme (2.19 min^?1 μM^?1). Finally, potentials of the catalysts were tested in the decolourisation of indigo carmine without redox-mediators. Seven consecutive runs with the catalysts separated by microfiltration proved that adsorption of the dye onto the carrier and enzymatic oxidation contribute to the efficient decolourisation without loss of immobilized enzyme activity.     

Biotransformation of 3-cyanopyridine to nicotinic acid by free and immobilized cells of recombinant Escherichia coli

An efficient biocatalytic process for the production of nicotinic acid (niacin) from 3-cyanopyridine was developed using cells of recombinant Escherichia coli JM109 harboring the nitrilase gene from Alcaligenes faecalis MTCC 126. The freely suspended cells of the biocatalyst were found to withstand higher concentrations of the substrate and the product without any signs of substrate inhibition. Immobilization of the cells further enhanced their substrate tolerance, stability and reusability in repetitive cycles of nicotinic acid production. Under optimized conditions (37 °C, 100 mM Tris buffer, pH 7.5) for the immobilized cells, the recombinant biocatalyst achieved a 100% conversion of 1 M 3-cyanopyridine to nicotinic acid within 5 h at a cell mass concentration (fresh weight) of 500 mg/mL. The high substrate/product tolerance and stability of the immobilized whole cell biocatalyst confers its potential industrial use.     

Immobilization of glycolate oxidase from Medicago falcata on magnetic nanoparticles for application in biosynthesis of glyoxylic acid

Glycolate oxidase was isolated from Medicago falcata Linn. after a screening from 13 kinds of C₃ plant leaves, with higher specific activity than the enzyme from spinach. The M. falcata glycolate oxidase (MFGO) was partially purified and then immobilized onto hydrothermally synthesized magnetic nanoparticles via physical adsorption. The magnetic nanoparticles were characterized with scanning electron microscope (SEM), transmission electron microscopy (TEM) and Fourier transform infrared (FT-IR) spectroscopy. The maximum load of MFGO was 56 mg/g support and the activity recovery was 45%. Immobilization of MFGO onto magnetic nanoparticles enhanced the enzyme stability, and the optimum temperature was significantly increased from 15 °C to 30 °C. The immobilized biocatalyst was successfully used in a batch reactor for repeated oxidization of glycolic acid to synthesize glyoxylic acid, retaining ca. 70% of its initial activity after 4 cycles of reaction at 30 °C for nearly 70 h, and its half-life was calculated to be 117 h.     

A robust whole-cell biocatalyst that introduces a thermo- and solvent-tolerant lipase into Aspergillus oryzae cells: Characterization and application to enzymatic biodiesel production

To develop a robust whole-cell biocatalyst that works well at moderately high temperature (40–50 °C) with organic solvents, a thermostable lipase from Geobacillus thermocatenulatus (BTL2) was introduced into an Aspergillus oryzae whole-cell biocatalyst. The lipase-hydrolytic activity of the immobilized A. oryzae (r-BTL) was highest at 50 °C and was maintained even after an incubation of 24-h at 60 °C. In addition, r-BTL was highly tolerant to 30% (v/v) organic solvents (dimethyl carbonate, ethanol, methanol, 2-propanol or acetone). The attractive characteristics of r-BTL also worked efficiently on palm oil methanolysis, resulting in a nearly 100% conversion at elevated temperature from 40 to 50 °C. Moreover, r-BTL catalyzed methanolysis at a high methanol concentration without a significant loss of lipase activity. In particular, when 2 molar equivalents of methanol were added 2 times, a methyl ester content of more than 90% was achieved; the yield was higher than those of conventional whole-cell biocatalyst and commercial Candida antarctica lipase (Novozym 435). On the basis of the results regarding the excellent lipase characteristics and efficient biodiesel production, the developed whole-cell biocatalyst would be a promising biocatalyst in a broad range of applications including biodiesel production.     

The modification of glucose levels and N source in the Hungate's medium to stimulate the production of fibrolytic enzymes of Anaeromyces sp. YQ3 grown on corn stalks

Hungate's method is a well-accepted protocol for the isolation or incubation of anaerobes with a roll tube technique. The aim of this study was to stimulate fungal enzyme production by optimizing the components of Hungate's medium for the growth of a rumen fungus Anaeromyces sp. YQ3. The organism was grown on corn stalks and incubated for 10 days in defined media with two glucose levels (G⁺, glucose in the Hungate's medium as a glucose control; G^?, glucose removed in a modified Hungate's medium) and four N sources (N1: yeast extract + tryptone + (NH₄)₂SO₄ in Hungate's medium (control); N2: yeast extract + (NH₄)₂SO₄; N3: tryptone + (NH₄)₂SO₄; and N4: tryptone + yeast extract). In the G^? media, the recovered activities of feruloyl esterase (FAE) (P<0.0001), acetyl esterase (AE) (P=0.0065) and xylanase (P<0.0001) were decreased, while the G⁺ media with N1 nitrogen stimulated the production of FAE and xylanase (P<0.0001). The G^? medium with N2 nitrogen increased the recovered activities of carboxymethyl cellulase (P=0.0001) and avicelase (P<0.0001), while the N3 and N4 media increased the recovered activity of AE (P=0.0015). The N4 medium was comparable to the N1 medium in stimulating the amount of recovered xylanase activity. The activities of FAE (P<0.0001), AE (P<0.0001), and xylanase (P<0.0001) showed a time-dependent increase and reached their peaks at day 10, while the avicelase activity peaked at day 8 (P=0.0071). The esterase activities (FAE and AE) were positively correlated with the enzyme activities of xylanase and carboxymethyl cellulase (r > 0.48, P<0.05). After a 10-day incubation, the glucose in the Hungate's media contributed to an increase in organic matter disappearance (P<0.0001) and volatile fatty acid (VFA) concentration (P<0.0001), except for molar acetate proportions. The N4 treatment increased organic matter disappearance and total VFA concentration (P=0.0002). The change in N source did not alter molar proportions of acetate, propionate and valerate, while the N2 treatment increased molar butyrate proportion (P<0.0035), and both N2 and N3 increased the molar proportion of branched chain VFAs (P<0.0041). In summary, the glucose in the Hungate's medium is beneficial for stimulating the production of esterases and xylanase, thereby promoting fungal growth. Amending the N source in Hungate's medium brings about different yields of rumen fungal esterases and polysaccharide hydrolases that have important nutritional impacts on fibre degradation in ruminant animals.     

Effect of dl-malate on mixed ruminal microorganism fermentation using the rumen simulation technique (RUSITEC)

The objective of this study was to investigate the effects of dl-malate on the in vitro fermentation of a 50 : 50 forage : concentrate diet using the rumen simulation technique (RUSITEC) and to compare these effects with those induced by the addition of propionate. The RUSITEC system consisted of eight vessels: three of them received daily 5.62 mmol of dl-malate, three vessels received daily 5.62 mmol of propionate and two vessels received no additives (control). After an adaptation period of 11 days the main fermentation parameters were determined for five consecutive days. There were no significant differences between treatments either in pH or in the daily production of NH₃–N. Compared to control diet, the addition of dl-malate resulted in an increase (p < 0.05) of hemicellulose disappearance and a trend (p < 0.10) towards a greater disappearance of dry matter, organic matter and neutral detergent fibre. Differences between dl-malate and propionate in diet degradation were not significant. dl-malate treatment resulted in an increase (p < 0.01) of daily propionate production, and a decrease (p < 0.05) in the amount of both methane (mmol/g DM fermented) and l-lactate (mg/day). Compared to propionate, dl-malate produced an increase (p < 0.05) of acetate production and tended to produce a lower amount of propionate (p < 0.10). In conclusion, these results seem to indicate that dl-malate enhanced the in vitro fermentation by increasing production of propionate and digestibility of hemicellulose.     

Biocatalytic methanolysis activities of cross-linked protein-coated microcrystalline lipase toward esterification/transesterification of relevant palm products

Biocatalysis by immobilized lipase is an efficient alternative process for conversion of crude vegetable oil with high free fatty acid content to biodiesel, which is the limit of the conventional alkaline-catalyzed reaction. In this study, influences of solid-state organic and inorganic buffer core matrices with different pK_a on catalytic performance of cross-linked protein coated microcrystalline biocatalysts prepared from Thermomyces lanuginosus lipase (CL-PCMC-LIP) toward esterification of palmitic acid (PA), transesterification of refined palm oil (RPO), and co-ester/transesterification of crude palm oil (CPO) to fatty acid methyl ester (FAME) was studied. Glycine, CAPSO (3-(cyclohexylamino)-2-hydroxy-1-propanesulfonic acid), and TAPS ([(2-hydroxy-1,1-bis(hydroxymethyl)ethyl)amino]-1-propanesulfonic acid) were shown to be potent core matrices for these reactions. The optimal reaction contained 4:1 [methanol]/[fatty acid] molar equivalence ratio with 20% (w/w) CL-PCMC-LIP on glycine in the presence of tert-butanol as a co-solvent. Deactivation effect of glycerol on the biocatalyst reactive surface was shown by FTIR, which could be alleviated by increasing co-solvent content. The maximal FAME yields from PA, RPO, and CPO reached 97.6, 94.9, and 95.5%, respectively on a molar basis under the optimum conditions after incubation at 50 °C for 6 h. The biocatalyst retained >80% activity after recycling in five consecutive batches. The work demonstrates the potential of CL-PCMC-LIP on one-step conversion of inexpensive crude fatty acid-rich feedstock to biodiesel.     

Effects of yeast culture (Saccharomyces cerevisiae) on ruminal digestion in non-lactating dairy cows

Six non-lactating dairy cows fitted with ruminal cannulas were used in a cross-over design, to investigate the effects of supplemental yeast culture (Saccharomyces cerevisiae) (YC) and interaction of YC by sampling time on ruminal fermentation and in situ fibre degradation. Cows were fed twice daily with a diet composed of 67% corn silage, 32% concentrate and 1% vitamin and mineral mixture, on a dry matter (DM) basis. Concentrates were not mixed with silage. YC (0.5% DM) significantly decreased rumen ammonia from 148.5 mg l⁻¹ to 103.1 mg l⁻¹ 3 h post-feeding, and significantly increased by about 20% the concentration of total volatile fatty acids before and 1 h after feeding. YC significantly increased molar percentage of propionate and decreased the acetate : propionate ratio before feeding. No significant effect was observed on ruminal pH and molar percentages of acetate or butyrate. Pattern of degradation of DM, neutral and acid detergent fibre from hay was affected, with a cubic effect of interaction of YC by incubation time. However, magnitude of degradation was not significantly different at any time. These results show that modifications of ruminal fermentation due to YC addition are time dependent when the diet is fed twice daily.     

Effects of dietary whole cottonseed and crude protein level on rumen protozoal population and fermentation parameters

In this investigation in vitro and in vivo trials were performed to determine the efficacy of a cottonseed to limit protozoal population and fermentation parameters. The composition of diets given to the different treatments were as follow: (1) control (without whole cottonseed), 16% crude protein (CP), 3.2% ether extract (E.E.); (2) 20% whole cottonseed, 16% CP, 6.5% E.E.; (3) 20% whole cottonseed, 13% CP, 6.4% E.E. and (4) 20% crushed whole cottonseed, 13% CP, 6.4% E.E. DM disappearance (DMD) and fermentation characteristics of the treatments were determined by in vitro incubation studies. In the in vivo trial, ruminal fluid was taken by rumenocentesis (3 h after feeding) on days 1, 3, 5, 7, 9, 11, 14, 21 and 28 from four sheep fed about treatment diets. The pH and protozoal counts were determined in each sample, while ammonia nitrogen and volatile fatty acid (VFA) were determined in samples taken on days 7, 14, 21 and 28. The in vitro DMD after 24 h incubation decreased (p < 0.01) with the addition of cottonseed in diets 3 and 4 and DMD after 72 h incubation was highest (p < 0.01) for the control diet. The fractional rate of gas production (c) for the control and diet 2 was higher (p < 0.05) than for the diets 3 and 4. Feeding crushed whole cottonseed decreased molar proportion of propionate (p < 0.05) and increased molar proportion of butyrate (p < 0.01). Low crude protein level increased the molar proportion of propionate (p < 0.05) and decreased molar proportion of butyrate (p < 0.05) and cellolytic protozoa population (p < 0.05). Feeding cottonseed decreased (p < 0.05) the total protozoa population from approximately 500,000 to 250,000 ml⁻¹ and Holotrich and cellulolytic protozoa disappeared from the rumen of sheep and only Entodinium sp., remained. This was associated with lower concentration of ammonia nitrogen in rumen fluid of sheep fed diets 4 (p < 0.05) and 2 (p < 0.01). It was concluded that cottonseed reduced rumen fauna and ammonia nitrogen, but had no effect on ruminal VFA while the crushed whole cottonseed decreased molar proportion of isovalerate only. In vivo molar proportion of propionate and butyrate and valerate were increase and decrease, respectively, by decreasing CP percentage in treatment diets.