Length variation of helix III in a hammerhead ribozyme and its influence on cleavage activity

The previously described HIV-1 directed hammerhead ribozyme 2as-Rz12 can form with its target RNA 2s helices I and III of 128 and 278 base pairs (bp). A series of derivatives was made in which helix III was truncated to 8, 5, 4, 3, and 2 nucleotides (nt). These asymmetric hammerhead ribozymes were tested for in vitro cleavage and for inhibition of HIV-1 replication in human cells. Truncation of helix III to 8 bp did not affect the in vitro cleavage potential of the parental catalytic antisense RNA 2as-Rz12. Further truncation of helix III led to decreased cleavage rates, with no measurable cleavage activity for the 2 bp construct. All catalytically active constructs showed complex cleavage kinetics. Three kinetic subpopulations of ribozyme-substrate complexes could be discriminated that were cleaved with fast or slow rates or not at all. Gel purification of preformed ribozyme-substrate complexes led to a significant increase in cleavage rates. However, the complex cleavage pattern remained. In mammalian cells, the helix III-truncated constructs showed the same but no increased inhibitory effect of the comparable antisense RNA on HIV-1 replication.     

A three-nucleotide helix I is sufficient for full activity of a hammerhead ribozyme: advantages of an asymmetric design.

Trans-cleaving hammerhead ribozymes with long target-specific antisense sequences flanking the catalytic domain share some features with conventional antisense RNA and are therefore termed 'catalytic antisense RNAs'. Sequences 5' to the catalytic domain form helix I and sequences 3' to it form helix III when complexed with the target RNA. A catalytic antisense RNA of more than 400 nucleotides, and specific for the human immunodeficiency virus type 1 (HIV-1), was systematically truncated within the arm that constituted originally a helix I of 128 base pairs. The resulting ribozymes formed helices I of 13, 8, 5, 3, 2, 1 and 0 nucleotides, respectively, and a helix III of about 280 nucleotides. When their in vitro cleavage activity was compared with the original catalytic antisense RNA, it was found that a helix I of as little as three nucleotides was sufficient for full endonucleolytic activity. The catalytically active constructs inhibited HIV-1 replication about four-fold more effectively than the inactive ones when tested in human cells. A conventional hammerhead ribozyme having helices of just 8 nucleotides on either side failed to cleave the target RNA in vitro when tested under the conditions for catalytic antisense RNA. Cleavage activity could only be detected after heat-treatment of the ribozyme substrate mixture which indicates that hammerhead ribozymes with short arms do not associate as efficiently to the target RNA as catalytic antisense RNA. The requirement of just a three-nucleotide helix I allows simple PCR-based generation strategies for asymmetric hammerhead ribozymes. Advantages of an asymmetric design will be discussed.     

Target sequence-specific inhibition of HIV-1 replication by ribozymes directed to tat RNA.

The structural motif formed between a hammerhead ribozyme and its substrate consists of three RNA double helices in which the sequence 5' to the XUY is termed helix I and the sequence 3' to the XUY helix III. Two hammerhead ribozymes targeted to the tat gene of HIV-1SF2 were designed to study target specificity and the potential effect of helix I mismatch on ribozyme efficacy both in vitro and in vivo. The first ribozyme (Rz1) targeted to the 5' splicing region of the tat gene was designed to cleave GUC*A. In HIV-1IIIB the A is changed to a G. The second ribozyme (Rz2) was targeted to the translational initiation region of the tat gene which is highly conserved among a variety of HIV-1 isolates, including both HIV-1SF2 and HIV-1IIIB. In vitro cleavage studies demonstrated that Rz1 efficiency cleaved HIV-1SF2 substrate RNA, but not HIV-1IIIB, presumably due to the base change from A to G. In contrast, Rz2 cleaved HIV-1SF2 or HIV-1IIIB substrate with equal efficiency. Both ribozymes were cloned into the 3' untranslated region of the neomycin gene (neo) within the pSV2neo vector and transfected into the SupT1 human CD4+ T cell line. Following selection, stable transfectants were challenged with either HIV-1SF2 or HIV-1IIIB virus. While Rz1-expressing cells were significantly protected from HIV-1SF2 infection, they exhibited no protection when infected with HIV-1IIIB virus. In contrast, Rz2 was effective in inhibiting the replication of both HIV-1SF2 and HIV-1IIIB in SupT1 cells. Expression of both ribozymes in these cells was demonstrated by Northern analysis. RT-PCR sequencing analysis confirmed the respective HIV-1 target sequence integrity. These data demonstrate the importance of the first base pair distal to the XUY within helix I of the hammerhead structure for both in vitro and in vivo ribozyme activities and imply that the effectiveness of the anti-HIV-1 ribozymes against appropriate target sequences is due to their catalytic activities rather than any antisense effect.     

The effect of structure in a long target RNA on ribozyme cleavage efficiency.

Inhibition of gene expression by catalytic RNA (ribozymes) requires that ribozymes efficiently cleave specific sites within large target RNAs. However, the cleavage of long target RNAs by ribozymes is much less efficient than cleavage of short oligonucleotide substrates because of higher order structure in the long target RNA. To further study the effects of long target RNA structure on ribozyme cleavage efficiency, we determined the accessibility of seven hammerhead ribozyme cleavage sites in a target RNA that contained human immunodeficiency virus type 1 (HIV-1) vif - vpr . The base pairing-availability of individual nucleotides at each cleavage site was then assessed by chemical modification mapping. The ability of hammerhead ribozymes to cleave the long target RNA was most strongly correlated with the availability of nucleotides near the cleavage site for base pairing with the ribozyme. Moreover, the accessibility of the seven hammerhead ribozyme cleavage sites in the long target RNA varied by up to 400-fold but was directly determined by the availability of cleavage sites for base pairing with the ribozyme. It is therefore unlikely that steric interference affected hammerhead ribozyme cleavage. Chemical modification mapping of cleavage site structure may therefore provide a means to identify efficient hammerhead ribozyme cleavage sites in long target RNAs.     

Design, characterization and testing of tRNA3Lys-based hammerhead ribozymes

A hammerhead ribozyme targeted against the HIV-1 env coding region was expressed as part of the anticodon loop of human tRNA3Lys without sacrificing tRNA stability or ribozyme catalytic activity. These tRNA-ribozymes were isolated from a library which was designed to contain linkers (sequences connecting the ribozyme to the anticodon loop) of random sequence and variable length. The ribozyme target site was provided in cis during selection and in trans during subsequent characterization. tRNA-ribozymes that possessed ideal combinations of linkers were expected to recognize the cis target site more freely and undergo cleavage. The cleaved molecules were isolated, cloned and characterized. Active tRNA-ribozymes were identified and the structural features conducive to cleavage were defined. The selected tRNA-ribozymes were stable, possessed cleavage rates lower or similar to the linear hammerhead ribozyme, and could be transcribed by an extract containing RNA polymerase III. Retroviral vectors expressing tRNA-ribozymes were tested in a human CD4+ T cell line and were shown to inhibit HIV-1 replication. These tRNA3Lys-based hammerhead ribozymes should therefore prove to be valuable for both basic and applied research. Special application is sought in HIV-1 or HIV-2 gene therapy.     

Ribozymes that cleave an RNA sequence from human immunodeficiency virus: the effect of flanking sequence on rate

Ribozymes designed to cleave sequences specific to viral RNA may be better antiviral agents than simple antisense oligonucleotides. High catalytic activity with the lowest possible chain length is desired for this purpose. We have synthesized several hammerhead ribozymes that cleave sequences from HIV-1 RNA. On reducing from 20 to 12 the base pairs formed with the substrate, the rate of cleavage at 37 degrees C increased 10-fold. Deletions from the stem/loop structure in the ribozyme also increased the initial rate of reaction.     

Chimeric DNA-RNA hammerhead ribozymes have enhanced in vitro catalytic efficiency and increased stability in vivo.

Subsequent to the discovery that RNA can have site specific cleavage activity, there has been a great deal of interest in the design and testing of trans-acting catalytic RNAs as both surrogate genetic tools and as therapeutic agents. We have been developing catalytic RNAs or ribozymes with target specificity for HIV-1 RNA and have been exploring chemical synthesis as one method for their production. To this end, we have chemically synthesized and experimentally analyzed chimeric catalysts consisting of DNA in the non-enzymatic portions, and RNA in the enzymatic core of hammerhead type ribozymes. Substitutions of DNA for RNA in the various stems of a hammerhead ribozyme have been analyzed in vitro for kinetic efficiency. One of the chimeric ribozymes used in this study, which harbors 24 bases of DNA capable of base-pairing interactions with an HIV-1 gag target, but maintains RNA in the catalytic center and in stem-loop II, has a sixfold greater kcat value than the all RNA counterpart. This increased activity appears to be the direct result of enhanced product dissociation. Interestingly, a chimeric ribozyme in which stem-loop II (which divides the catalytic core) is comprised of DNA, exhibited a marked reduction in cleavage activity, suggesting that DNA in this region of the ribozyme can impart a negative effect on the catalytic function of the ribozyme. DNA-RNA chimeric ribozymes transfected by cationic liposomes into human T-lymphocytes are more stable than their all-RNA counterparts. Enhanced catalytic turnover and stability in the absence of a significant effect on Km make chimeric ribozymes favorable candidates for therapeutic agents.     

A strategy for developing a hammerhead ribozyme for selective RNA cleavage depending on substitutional RNA editing

Substitutional RNA editing plays a crucial role in the regulation of biological processes. Cleavage of target RNA that depends on the specific site of substitutional RNA editing is a useful tool for analyzing and regulating intracellular processes related to RNA editing. Hammerhead ribozymes have been utilized as small catalytic RNAs for cleaving target RNA at a specific site and may be used for RNA-editing-specific RNA cleavage. Here we reveal a design strategy for a hammerhead ribozyme that specifically recognizes adenosine to inosine (A-to-I) and cytosine to uracil (C-to-U) substitutional RNA-editing sites and cleaves target RNA. Because the hammerhead ribozyme cleaves one base upstream of the target-editing site, the base that pairs with the target-editing site was utilized for recognition. RNA-editing-specific ribozymes were designed such that the recognition base paired only with the edited base. These ribozymes showed A-to-I and C-to-U editing-specific cleavage activity against synthetic serotonin receptor 2C and apolipoprotein B mRNA fragments in vitro, respectively. Additionally, the ribozyme designed for recognizing A-to-I RNA editing at the Q/R site on filamin A (FLNA) showed editing-specific cleavage activity against physiologically edited FLNA mRNA extracted from cells. We demonstrated that our strategy is effective for cleaving target RNA in an editing-dependent manner. The data in this study provided an experimental basis for the RNA-editing-dependent degradation of specific target RNA in vivo.     

In vitro optimization of truncated stem-loop II variants of the hammerhead ribozyme for cleavage in low concentrations of magnesium under non-turnover conditions.

By truncating helix II to two base pairs in a hammerhead ribozyme having long flanking sequences (greater than 30 bases), the rate of cleavage in 1 mM magnesium can be increased roughly 100-fold. Replacing most of the nucleotides in a typical stem-loop II with 1-4 randomized nucleotides gave an RNA library that, even before selection, was more active in 1 mM magnesium than the parent ribozyme, but considerably less active than the truncated stem-loop II ribozyme. A novel, multiround selection for intermolecular cleavage was exploited to optimize this library for cleavage in low concentrations of magnesium. After three rounds of selection at sequentially lower concentrations of magnesium, the library cleaved substrate RNA 20-fold faster than the initial pool and was cloned. This pool was heavily enriched for one particular sequence (5'-CGUG-3') that represented 16 of 52 isolates (the next most common sequence was represented only six times). This sequence also represented the most active sequence, exceeding the activity of the short helix II variant under the conditions of the selection, thereby demonstrating the effectiveness of the selection technique. Analysis of the cleavage rates of RNAs made from eight isolates having different four-base insert sequences allowed assignment of highly preferred bases at each position in the insert. Analysis of pool clones having insert of differing lengths showed that, in general, activity decreased as the length of the insert decreased from 4 to 1. This supports the suggested role of stem-loop II in stabilizing the non-Watson-Crick interactions between the conserved bases of the catalytic core.     

Unexpected anisotropy in substrate cleavage rates by asymmetric hammerhead ribozymes.

RNA substrates which form relatively short helices I and III with hammerhead ribozymes are generally cleaved more rapidly than substrates which create longer binding helices. We speculated that for optimum cleavage rates, one of the helices needed to be relatively weak. To identify this helix, a series of ribozymes and substrates of varying lengths were made such that in the complex, helices I and III consisted of 5 and 10 bp respectively or vice versa. In two independent systems, substrates in the complexes with the shorter helix I and longer helix III were cleaved one to two orders of magnitude more rapidly than those in the complexes with the longer helix I and shorter helix III. Similar results were obtained whether the numbers of base pairs in helices I and III were limited either by the length of the hybridizing arms of the ribozyme or the length of the substrate. The phenomenon was observed for both all-RNA and DNA armed ribozymes. Thus, a relatively short helix I is required for fast cleavage rates in pre-formed hammer-head ribozyme-substrate complexes. When helix III has 10 bp, the optimum length for helix I is approximately 5 bp.     

Incorporation of the catalytic domain of a hammerhead ribozyme into antisense RNA enhances its inhibitory effect on the replication of human immunodeficiency virus type 1.

The catalytic domain of a hammerhead ribozyme was incorporated into a 413 nucleotides long antisense RNA directed against the 5'-leader/gag region of the human immunodeficiency virus type 1 (HIV-1) (pos. +222 to +634). The resulting catalytic antisense RNA was shown to cleave its target RNA in vitro specifically at physiological ion strength and temperature. We compared the antiviral effectiveness of this catalytic antisense RNA with that of the corresponding unmodified antisense RNA and with a mutated catalytic antisense RNA, which did not cleave the substrate RNA in vitro. Each of these RNAs was co-transfected into human SW480 cells together with infectious complete proviral HIV-1 DNA, followed by analysis of HIV-1 replication. The presence of the catalytically active domain resulted in 4 to 7 fold stronger inhibition of HIV-1 replication as compared to the parental antisense RNA and the inactive mutant. Kinetic and structural studies performed in vitro indicated that the ability for double strand formation was not changed in catalytic antisense RNA versus parental antisense RNA. Together, these data suggest that the ability to cleave target RNA is a crucial prerequisite for the observed increase of inhibition of the replication of HIV-1.     

Effects of variations in length of hammerhead ribozyme antisense arms upon the cleavage of longer RNA substrates.

The efficacy of intracellular binding of hammerhead ribozyme to its cleavage site in target RNA is a major requirement for its use as a therapeutic agent. Such efficacy can be influenced by several factors, such as the length of the ribozyme antisense arms and mRNA secondary structures. Analysis of various IL-2 hammerhead ribozymes having different antisense arms but directed to the same site predicts that the hammerhead ribozyme target site is present within a double-stranded region that is flanked by single-stranded loops. Extension of the low cleaving hammerhead ribozyme antisense arms by nucleotides that base pair with the single-stranded regions facilitated the hammerhead ribozyme binding to longer RNA substrates (e.g. mRNA). In addition, a correlation between the in vitro and intracellular results was also found. Thus, the present study would facilitate the design of hammerhead ribozymes directed against higher order structured sites. Further, it emphasises the importance of detailed structural investigations of hammerhead ribozyme full-length target RNAs.     

Allosteric regulation of a ribozyme activity through ligand-induced conformational change.

An allosteric ribozyme has been designed using the hammerhead ribozyme as the active site and aflavin-specific RNA aptamer as a regulatory site. We constructed six variants with a series of base pairs in the linker region (stem II). Under single turnover conditions, kinetic studies were carried out in the absence and presence of flavin mononucleotide (FMN). Interestingly, FMN addition did not influence the cleavage rate of constructs with a 5-6 bp linker but stimulated the catalytic activity of those bearing a shorter linker. In particular, the apparent k cat of Rz3 increases by approximately 10-fold upon addition of saturating amounts of FMN. To determine the rate constants( K m4and k cat), the ribozyme regulated most effectively by FMN was further investigated. FMN mainly affected the k cat value, reflecting the rate limiting conformational change step of the overall cleavage reaction, depending on helix formation in stem II. Probably, FMN influences the orientation of structures necessary for the cleavage reaction through stem II formation. The result of chemical modification revealed that binding of FMN to the aptamer domain induced the helix formation in stem II required for catalytic activity. Therefore, a specific FMN-mediated allosteric interaction seems to promote a conformational alteration from an open to a closed structure in stem II. The concept of conformational modification in the allosteric effect is consistent with other allosteric enzymes, suggesting that such a conformational change is a fundamental feature of allosteric enzymes in biological systems.     

Inhibition of hepatitis B virus by hammerhead ribozyme targeted to the poly(A) signal sequence in cultured cells

The deviant poly(A) signal of hepatitis B virus (HBV) not only controls the formation of the 3' end of all the viral RNA, but is also crucial for HBV replication. Hence, a cis-releasing hammerhead ribozyme (RzA) targeted to the poly(A) signal region of HBV subtype adr was investigated for its antiviral effects. In vitro, RzA cleaved HBV RNA at its target site up to 70%, while the disabled ribozyme (dRzA), which had a one-base mutation in the catalytic site, did not cleave the target RNA at all. When the ribozymes were cotransfected into HepG2 cells with the HBV genome-containing plasmid p3.6II, the wild-type ribozyme RzA could effectively decrease HBV RNA levels and inhibit HBV replication, whereas its disabled form, dRzA, had much weaker effects, indicating that the active catalytic domain of the hammerhead ribozyme could markedly increase the extent of antisense-mediated inhibition. In addition, there was a gradient of effectiveness: the higher the amount of released ribozyme, the more the reduction in target HBV RNA in cells as well as progeny DNA reduction. These results suggest the possibility of the hammerhead ribozyme RzA to be used for the gene therapy of HBV infection.     

Specificity of hammerhead ribozyme cleavage.

To be effective in gene inactivation, the hammerhead ribozyme must cleave a complementary RNA target without deleterious effects from cleaving non-target RNAs that contain mismatches and shorter stretches of complementarity. The specificity of hammerhead cleavage was evaluated using HH16, a well-characterized ribozyme designed to cleave a target of 17 residues. Under standard reaction conditions, HH16 is unable to discriminate between its full-length substrate and 3'-truncated substrates, even when six fewer base pairs are formed between HH16 and the substrate. This striking lack of specificity arises because all the substrates bind to the ribozyme with sufficient affinity so that cleavage occurs before their affinity differences are manifested. In contrast, HH16 does exhibit high specificity towards certain 3'-truncated versions of altered substrates that either also contain a single base mismatch or are shortened at the 5' end. In addition, the specificity of HH16 is improved in the presence of p7 nucleocapsid protein from human immunodeficiency virus (HIV)-1, which accelerates the association and dissociation of RNA helices. These results support the view that the hammerhead has an intrinsic ability to discriminate against incorrect bases, but emphasizes that the high specificity is only observed in a certain range of helix lengths.     

The effect of base mismatches in the substrate recognition helices of hammerhead ribozymes on binding and catalysis.

The ability of the hammerhead ribozyme to distinguish between matched and mismatched substrates was evaluated using two kinetically defined ribozymes that differed in the length and sequence of the substrate recognition helices. A mismatch in the innermost base pair of helix I affected k2, the chemical cleavage step, while more distal mismatches had no such effect. In contrast, mismatches in any of the four innermost base pairs of helix III affected k2. Chase experiments indicated that mismatches also increased the rate of substrate dissociation by at least 20-100-fold, as expected from the stabilities of RNA helices.     

The tolerance to exchanges of the Watson Crick base pair in the hammerhead ribozyme core is determined by surrounding elements

Tertiary interacting elements are important features of functional RNA molecules, for example, in all small nucleolytic ribozymes. The recent crystal structure of a tertiary stabilized type I hammerhead ribozyme revealed a conventional Watson-Crick base pair in the catalytic core, formed between nucleotides C3 and G8. We show that any Watson-Crick base pair between these positions retains cleavage competence in two type III ribozymes. In the Arabidopsis thaliana sequence, only moderate differences in cleavage rates are observed for the different base pairs, while the peach latent mosaic viroid (PLMVd) ribozyme exhibits a preference for a pyrimidine at position 3 and a purine at position 8. To understand these differences, we created a series of chimeric ribozymes in which we swapped sequence elements that surround the catalytic core. The kinetic characterization of the resulting ribozymes revealed that the tertiary interacting loop sequences of the PLMVd ribozyme are sufficient to induce the preference for Y3-R8 base pairs in the A. thaliana hammerhead ribozyme. In contrast to this, only when the entire stem-loops I and II of the A. thaliana sequences are grafted on the PLMVd ribozyme is any Watson-Crick base pair similarly tolerated. The data provide evidence for a complex interplay of secondary and tertiary structure elements that lead, mediated by long-range effects, to an individual modulation of the local structure in the catalytic core of different hammerhead ribozymes.     

Generation and application of asymmetric hammerhead ribozymes.

Most researchers who intend to suppress a particular gene are interested primarily in the application of ribozyme technology rather than its mechanistic details. This article provides some background information and describes a straightforward strategy to generate and test a special design of a ribozyme: the asymmetric hammerhead ribozyme. This version of a hammerhead ribozyme carries at its 5' end the catalytic domain and at its 3' end a relatively long antisense flank that is complementary to the target RNA. Asymmetric hammerhead ribozymes can be constructed via polymerase chain reaction amplification, and rules are provided on how to select the DNA oligonucleotides required for this reaction. In addition to details on construction, we describe how to test asymmetric hammerhead ribozymes for association with the target RNA in vitro, so that RNA constructs can be selected and optimized for fast hybridization with their target RNA. This test can allow one to minimize association problems caused by the secondary structure of the target RNA. Additionally, we describe the in vitro cleavage assay and the determination of the cleavage rate constant. Testing for efficient cleavage is also a prerequisite for reliable and successful application of the technology. A carefully selected RNA will be more promising when eventually used for target suppression in living cells.     

Induction of ribozyme activity by anti-ribozyme oligonucleotides.

A new type of hammerhead ribozyme, with cleavage activity enhanced by oligonucleotides, was constructed. Stem II of the ribozyme was substituted with a non complementary loop (loop II). The modified ribozyme exhibited negligible cleavage of a target RNA; however, it was converted to an active molecule in the presence of oligonucleotides which were complementary to loop II. The oligonucleotide compensated for the disabled stem II by binding with the ribozyme. The induction of the cleavage activity was sequence-specific and the oligonucleotides containing a purine base as the 3'-dangling end were able to induce the cleavage activity of the ribozyme most efficiently. A photo-crosslinking experiment proved that a pseudo-half-knot structure was formed in the active molecule. The cleavage of two kinds of substrate RNAs with different sequences was controlled by the corresponding ribozymes activated by specific oligonucleotides.