Folding recombinant spider‐silk in H2O: Effect of osmolytes on the solution conformation of a 15‐repeat spider‐silk mimetic

The folding of a recombinant spider silk protein‐polymer in the presence of the tri‐methylamine osmolytes TMANO and Betaine in 80% H₂O is reported. Circular dichroism measurements (CD) reveal an increase in α‐helical secondary structure with increasing osmolyte concentrations, as determined by an increase in ellipticity at 222 nm. Consistent with this observation, the signal for random coil sampling, observed at 205 nm, is greatly reduced with increasing trimethylamine. Fluorescence spectra of a single tyrosine positioned within the conserved 33‐amino acid repeat primary sequence (of the spider‐silk mimetic) complements the conformational changes observed by CD. Importantly, there is a correlation between the number of Alkyl‐groups (CH₃‐) on the amine of the osmolyte and enhanced helicity of the 15‐repeat silk‐mimetic for the osmolytes tested, ie TMANO, Betaine, Sarcosine and Glycine. These preliminary results are applicable to storing and processing recombinant silk sequences in H₂O, an important mile‐stone for widespread use of recombinant silk polymers.     

Analyis of structure/property relationships in silkworm (Bombyx mori) and spider dragline (Nephila edulis) silks using Raman spectroscopy

The molecular deformation of both silkworm (Bombyx mori) and spider dragline (Nephila edulis) silks has been studied using a combination of mechanical deformation and Raman spectroscopy. The stress/strain curves for both kinds of silk showed elastic behavior followed by plastic deformation. It was found that both materials have well-defined Raman spectra and that some of the bands in the spectra shift to lower frequency under the action of tensile stress or strain. The band shift was linearly dependent upon stress for both types of silk fiber. This observation provides a unique insight into the effect of tensile deformation upon molecular structure and the relationship between structure and mechanical properties. Two similar bands in the Raman spectra of both types of silk in the region of 1000-1300 cm(-1) had significant identical rates of Raman band shift of about 7 cm(-1)/GPa and 14 cm(-1)/GPa demonstrating the similarity between the silk fibers from two different animals.     

Structure and Biodegradation Mechanism of Milled Bombyx mori Silk Particles

The aim of this study was to understand the structure and biodegradation relationships of silk particles intended for targeted biomedical applications. Such a study is also useful in understanding structural remodelling of silk debris that may be generated from silk-based implants. Ultrafine silk particles were prepared using a combination of efficient wet-milling and spray-drying processes with no addition of chemicals other than those used in degumming. Milling reduced the intermolecular stacking forces within the β-sheet crystallites without changing the intramolecular binding energy. Because of the rough morphology and the ultrafine size of the particles, degradation of silk particles by protease XIV was increased by about 3-fold compared to silk fibers. Upon biodegradation, the thermal degradation temperature of silk increased, which was attributed to the formation of tight aggregates by the hydrolyzed residual macromolecules. A model of the biodegradation mechanism of silk particles was developed based on the experimental data. The model explains the process of disintegration of β-sheets, supported by quantitative secondary structural analysis and microscopic images.     

1H, 13C and 15N NMR assignments of the aciniform spidroin (AcSp1) repetitive domain of Argiope trifasciata wrapping silk

Spider silk is one of nature's most remarkable biomaterials due to extraordinary strength and toughness not found in today's synthetic materials. Of the seven types of silk, wrapping silk (AcSp1) is the most extensible of the types of silks and has no sequence similarity to the other types. Here we report the chemical shifts for the AcSp1 199 amino acid protein repeat unit and its anticipated secondary structure based on secondary chemical shifts.     

蜘蛛牵引丝蛋白cDNA的扩增、克隆与序列分析

蜘蛛是一种能在同一生物体内产生具有不同功能的多种丝的生物。蜘蛛丝的本质是蛋白质。牵引丝 (Ｄｒａｇｌｉｎｅｓｉｌｋ)是由蜘蛛的主壶腹腺 (Ｍａｊｏｒａｍｐｕｌｌａｔｅ ,ＭＡ)产生的 ,其较高的抗张强度 (4× 10 9Ｎ ｍ2 )与弹性 (35 % ) [1 ,2 ] ,使之成为一种有广阔应用前景的生物材料。目前 ,国外已有实验室通过构建ｃＤＮＡ文库的方法获得Ｎｅｐｈｉｌａｃｌａｖｉｐｅｓ中的两个牵引丝蛋白Ｓｐｉｄｒｏｉｎ1与Ｓｐｉｄｒｏｉｎ2的ｃＤＮＡ片段[3 ,4] ;但国内尚未见有相关报道。本文介绍的工作是利用简单便捷的ＰＣＲ技术对牵引丝…     

Structural properties of recombinant nonrepetitive and repetitive parts of major ampullate spidroin 1 from Euprosthenops australis: implications for fiber formation

Spider dragline silk proteins, spidroins, have a tripartite composition; a nonrepetitive N-terminal domain, a central repetitive region built up from many iterated poly-Ala and Gly rich blocks, and a C-terminal nonrepetitive domain. It is generally believed that the repetitive region forms intermolecular contacts in the silk fibers, while precise functions of the terminal domains have not been established. Herein, thermal, pH, and salt effects on the structure and aggregation and/or polymerization of recombinant N- and C-terminal domains, a repetitive segment containing four poly-Ala and Gly rich coblocks, and combinations thereof were studied. The N- and C-terminal domains have mainly alpha-helical structure, and interestingly, both form homodimers. Dimerization of the end domains allows spidroin multimerization independent of the repetitive part. Reduction of an intersubunit disulfide in the C-terminal domain lowers the thermal stability but does not affect dimerization. The repetitive region shows helical secondary structure but appears to lack stable folded structure. A protein composed of this repetitive region linked to the C-terminal domain has a mainly alpha-helical folded structure but shows an abrupt transition to beta-sheet structures upon heating. At room temperature, this protein self-assembles into macroscopic fibers within minutes. The secondary structures of none of the domains are altered by pH or salt. However, high concentrations of phosphate affect the tertiary structure and accelerate the aggregation propensity of the repetitive region. Implications of these results for dragline spidroin behavior in solution and silk fiber formation are discussed.     

Primary structure elements of spider dragline silks and their contribution to protein solubility

Spider silk proteins have mainly been investigated with regard to their contribution to mechanical properties of the silk thread. However, little is known about the molecular mechanisms of silk assembly. As a first step toward characterizing this process, we aimed to identify primary structure elements of the garden spider's (Araneus diadematus) major dragline silk proteins ADF-3 and ADF-4 that determine protein solubility. In addition, we investigated the influence of conditions involved in mediating natural thread assembly on protein aggregation. Genes encoding spider silk-like proteins were generated using a cloning strategy, which is based on a combination of synthetic DNA modules and PCR-amplified authentic gene sequences. Comparing secondary structure, solubility, and aggregation properties of the synthesized proteins revealed that single primary structure elements have diverse influences on protein characteristics. Repetitive regions representing the largest part of dragline silk proteins determined the solubility of the synthetic proteins, which differed greatly between constructs derived from ADF-3 and ADF-4. Factors, such as acidification and increases in phosphate concentration, which promote silk assembly in vivo generally decreased silk protein solubility in vitro. Strikingly, this effect was pronounced in engineered proteins comprising the carboxyl-terminal nonrepetitive regions of ADF-3 or ADF-4, indicating that these regions might play an important role in initiating assembly of spider silk proteins.     

Complete gene sequence of spider attachment silk protein (PySp1) reveals novel linker regions and extreme repeat homogenization

Spiders use a myriad of silk types for daily survival, and each silk type has a unique suite of task-specific mechanical properties. Of all spider silk types, pyriform silk is distinct because it is a combination of a dry protein fiber and wet glue. Pyriform silk fibers are coated with wet cement and extruded into “attachment discs” that adhere silks to each other and to substrates. The mechanical properties of spider silk types are linked to the primary and higher-level structures of spider silk proteins (spidroins). Spidroins are often enormous molecules (>250 kDa) and have a lengthy repetitive region that is flanked by relatively short (∼100 amino acids), non-repetitive amino- and carboxyl-terminal regions. The amino acid sequence motifs in the repetitive region vary greatly between spidroin type, while motif length and number underlie the remarkable mechanical properties of spider silk fibers. Existing knowledge of pyriform spidroins is fragmented, making it difficult to define links between the structure and function of pyriform spidroins. Here, we present the full-length sequence of the gene encoding pyriform spidroin 1 (PySp1) from the silver garden spider Argiope argentata. The predicted protein is similar to previously reported PySp1 sequences but the A. argentata PySp1 has a uniquely long and repetitive “linker”, which bridges the amino-terminal and repetitive regions. Predictions of the hydrophobicity and secondary structure of A. argentata PySp1 identify regions important to protein self-assembly. Analysis of the full complement of A. argentata PySp1 repeats reveals extreme intragenic homogenization, and comparison of A. argentata PySp1 repeats with other PySp1 sequences identifies variability in two sub-repetitive expansion regions. Overall, the full-length A. argentata PySp1 sequence provides new evidence for understanding how pyriform spidroins contribute to the properties of pyriform silk fibers.     

An algorithm for the bonding-probability map of nucleic acid secondary structure

We report a more efficient and well-defined algorithm for predicting a secondary structure of single-stranded nucleic acid from a primary nucleotide sequence. Using this algorithm, one- and two-dimensional bonding-probability maps of 5S rRNA of thermus thermophilus HB8 were calculated. These maps well express the stability of the secondary structure.     

Thermally induced alpha-helix to beta-sheet transition in regenerated silk fibers and films

The structure of thin films cast from regenerated solutions of Bombyx mori cocoon silk in hexafluoroisopropyl alcohol (HFIP) was studied by synchrotron X-ray diffraction during heating. A solid-state conformational transition from an alpha-helical structure to the well-known beta-sheet silk II structure occurred at a temperature of approximately 140 degrees C. The transition appeared to be homogeneous, as both phases do not coexist within the resolution of the current study. Modulated differential scanning calorimetry (DSC) of the films showed an endothermic melting peak followed by an exothermic crystallization peak, both occurring near 140 degrees C. Oriented fibers were also produced that displayed this helical molecular conformation. Subsequent heating above the structural transition temperature produced oriented beta-sheet fibers very similar in structure to B. mori cocoon fibers. Heat treatment of silk films at temperatures well below their degradation temperature offers a controllable route to materials with well-defined structures and mechanical behavior.     

Synthesis and characterization of multiblock copolymers based on spider dragline silk proteins

Spider dragline silk with its superlative tensile properties provides an ideal system to study the relationship between morphology and mechanical properties of a structural protein. Accordingly, we synthesized two hybrid multiblock copolymers by condensing poly(alanine) [(Ala)(5)] blocks of the structural proteins (spidroin MaSp1 and MaSp2) of spider dragline silk with different oligomers of isoprene (2200 and 5000 Da) having reactive end groups. The synthetic multiblock polymer displayed similar secondary structure to that of natural spidroin, the peptide segment forming a beta-sheet structure. These multiblock polymers showed a significant solubility in the component solvents. Moreover, the copolymer which contains the short polyisoprene segment would aggregate into a micellar-like structure, as observed by TEM.     

Morphology and primary crystal structure of a silk-like protein polymer synthesized by genetically engineered Escherichia coli bacteria

The morphology and primary crystal structure of SLPF, a protein polymer produced by genetically engineered Escherichia coli bacteria, were characterized. SLPF is a segmented copolymer consisting of amino acid sequence blocks modeled on the crystalline segments of silk fibroin and the cell attachment domain of human fibronectin. Wide angle x-ray scattering (WAXS), transmission electron microscopy (TEM), selected area electron diffraction (SAED), and molecular simulations were used to analyze the primary crystal structure of SLPF. TEM experiments conducted on SLPF droplets cast from formic acid on amorphous carbon film demonstrated that these protein films have a microstructure formed of woven sheaves. The sheaves are composed of well-defined whisker crystallites. The width of the whiskers, 11.8 ± 2.2 nm, may be correlated to the length of the silk-like segment in SLPF as predicted by molecular simulations. WAXS data, TEM images, SAED, patterns, molecular simulations, and theoretical diffraction patterns all were consistent with the crankshaft model proposed for Silk I by Lotz and Keith. © 1994 John Wiley & Sons, Inc.     

Araneoid egg case silk: a fibroin with novel ensemble repeat units from the black widow spider, Latrodectus hesperus

Araneoid spiders use specialized abdominal glands to manufacture up to seven different protein-based silks/glues that have diverse physical properties. The fibroin sequences that encode egg case fibers (cover silk for the egg case sac) and the secondary structure of these threads have not been previously determined. In this study, MALDI tandem TOF mass spectrometry (MS/MS) and reverse genetics were used to isolate the first egg case fibroin, named tubuliform spidroin 1 (TuSp1), from the black widow spider, Latrodectus hesperus. Real-time quantitative PCR analysis demonstrates TuSp1 is selectively expressed in the tubuliform gland. Analysis of the amino acid composition of raw egg case silk closely aligns with the predicted amino acid composition from the primary sequence of TuSp1, which supports the assertion that TuSp1 represents a major component of egg case fibers. TuSp1 is composed of highly homogeneous repeats that are 184 amino acids in length. The long stretches of polyalanine and glycine-alanine subrepeats, which account for the crystalline regions of minor ampullate and major ampullate fibers, are very poorly represented in TuSp1. However, polyserine blocks and short polyalanine stretches were highly iterated within the primary sequence, and (13)C NMR spectroscopy demonstrated that the majority of alanine was found in a beta-sheet structure in post-spun egg case silk. The TuSp1 repeat unit does not display substantial sequence similarity to any previously described fibroin genes or proteins, suggesting that TuSp1 is a highly divergent member of the spider silk gene family.     

Synthesis and characterization of chimeric silkworm silk

A synthetic gene encoding a chimeric silklike protein was constructed that combined a polyalanine encoding region (Ala)(18), a sequence slightly longer than the (Ala)(12-13) found in the silk fibroin from the wild silkworm Samia cynthia ricini, and a sequence encoding GVGAGYGAGAGYGVGAGYGAGVGYGAGAGY, found in the silk fibroin from the silkworm Bombyx mori. A tetramer of the chimeric repeat sequence encoding a approximately 29 kDa protein was expressed as a fusion protein in Escherichia coli. In comparison to S. c. ricini silk, the chimeric protein demonstrated improved solubility because it could be dissolved in 8 M urea. The purified protein assumed an alpha-helical structure based on solid-state (13)C CP/MAS NMR and was less prone to conformational transition to a beta-sheet, unlike native silk proteins from S. c. ricini. Model peptides representing the crystalline region of S. c. ricini silk fibroin, (Ala)(12) and (Ala)(18), formed beta-sheet structures. Therefore, the solubility and structural transitions of the chimeric protein were significantly altered through the formation of this chimeric silk. This experimental strategy to the study of silk structure and function can be used to develop an improved understanding of the contributions of protein domains in repetitive silkworm and spider silk sequences to structure development and structural transitions.     

Silk from crickets: a new twist on spinning

Raspy crickets (Orthoptera: Gryllacrididae) are unique among the orthopterans in producing silk, which is used to build shelters. This work studied the material composition and the fabrication of cricket silk for the first time. We examined silk-webs produced in captivity, which comprised cylindrical fibers and flat films. Spectra obtained from micro-Raman experiments indicated that the silk is composed of protein, primarily in a beta-sheet conformation, and that fibers and films are almost identical in terms of amino acid composition and secondary structure. The primary sequences of four silk proteins were identified through a mass spectrometry/cDNA library approach. The most abundant silk protein was large in size (300 and 220 kDa variants), rich in alanine, glycine and serine, and contained repetitive sequence motifs; these are features which are shared with several known beta-sheet forming silk proteins. Convergent evolution at the molecular level contrasts with development by crickets of a novel mechanism for silk fabrication. After secretion of cricket silk proteins by the labial glands they are fabricated into mature silk by the labium-hypopharynx, which is modified to allow the controlled formation of either fibers or films. Protein folding into beta-sheet structure during silk fabrication is not driven by shear forces, as is reported for other silks.     

Well-defined lactose-containing polymer grafted onto silica particles

Reversible addition-fragmentation chain transfer (RAFT) polymerization of 2-O-meth-acryloyloxyethoxyl-(2,3,4,6-tetra-O-acetyl-beta-D-galactopyranosyl)-(1-4)-2,3,6-tri-O-acetyl-beta-D-glucopyranoside (MAEL) was performed directly in CHCl3 solutions using cumyl dithiobenzoate (CDB) as the chain transfer agent to give well-defined glycopolymers. The chemical composition and structure of the glycopolymer were characterized by 1HNMR, FTIR, and SEC. The living glycopolymer chains were subsequently grafted onto gamma-methacryloxypropyl-trimethoxy (MPTMS) modified silica particles. The acetyl groups of the poly(MAEL) grafted onto the silica gel particles were converted to the hydroxyl groups with CH3ONa/CH3OH, thus obtaining silica gel particles modified with well-defined lactose-carrying polymer.     

Codon usage and secondary structure of mRNA

The specific codon usage pattern of the repetitive unit nucleotide sequence of silk fibroin mRNA suggests that selection has operated on the codon usage to optimize the secondary structure characteristic of the mRNA. The correlation between the stability map of local secondary structure of type I collagen mRNA and the codon usage pattern and the translation rate of the collagen is also implied.     

The role of irregular unit,GAAS, on the secondary structure of Bombyx mori silk fibroin studied with 13C CP/MAS NMR and wide-angle X-ray scattering

Bombyx mori silk fibroin is a fibrous protein whose fiber is extremely strong and tough, although it is produced by the silkworm at room temperature and from an aqueous solution. The primary structure is mainly Ala-Gly alternative copolypeptide, but Gly-Ala-Ala-Ser units appear frequently and periodically. Thus, this study aims at elucidating the role of such Gly-Ala-Ala-Ser units on the secondary structure. The sequential model peptides containing Gly-Ala-Ala-Ser units selected from the primary structure of B. mori silk fibroin were synthesized, and their secondary structure was studied with (13)C CP/MAS NMR and wide-angle X-ray scattering. The (13)C isotope labeling of the peptides and the (13)C conformation-dependent chemical shifts were used for the purpose. The Ala-Ala units take antiparallel beta-sheet structure locally, and the introduction of one Ala-Ala unit in (Ala-Gly)(15) chain promotes dramatical structural changes from silk I (repeated beta-turn type II structure) to silk II (antiparallel beta-sheet structure). Thus, the presence of Ala-Ala units in B. mori silk fibroin chain will be one of the inducing factors of the structural transition for silk fiber formation. The role of Tyr residue in the peptide chain was also studied and clarified to induce "locally nonordered structure."     

Side-chain peptide-synthetic polymer conjugates via tandem "ester-amide/thiol-ene" post-polymerization modification of poly(pentafluorophenyl methacrylate) obtained using ATRP

Herein the concept of tandem postpolymerization modification as a versatile route to synthesize well-defined, highly functionalized polymers is introduced. Poly(pentafluorophenyl methacrylate) obtained by atom transfer radical polymerization was first modified with allylamine, which displaces the active ester to give well-defined polymers with pendant alkene groups, which are difficult to obtain by direct (radical) polymerization of allylic-functional monomers. The produced poly(allylmethacrylamide) was modified by a second postpolymerization modification reaction with a thiol-terminated peptide (CVPGVG) using AIBN as the radical source. NMR, IR, and SEC demonstrated successful conjugation onto the polymer to give a polymer-peptide hybrid material. This versatile strategy should extend the scope of controlled radical polymerization and "click"-type reactions.