Hybrid inflorescences derived from gamma-fusion of <Emphasis Type="Italic">Arabidopsis thaliana</Emphasis> with <Emphasis Type="Italic">Bupleurum scorzonerifolium</Emphasis>

In our early experiments, a variety of Bupleurum scorzonerifolium-like somatic hybrid plants were obtained from protoplast fusion between Arabidopsis thaliana and UV-treated/untreated B. scorzonerifolium. To compare the effects of UV and γ-ray irradiation on the B. scorzonerifolium partner and obtain Arabidopsis-like hybrids, we designed a novel combination of somatic hybridization between A. thaliana and B. scorzonerifolium. Before protoplast isolation and fusion, the suspension cells of B. scorzonerifolium were irradiated by gamma ray (⁶⁰Co, 50 Gy with 1.3 Gy min⁻¹). Both parental protoplasts lost regeneration capacity, but over 100 somatic hybrids restored the capacity and developed to Arabidopsis-like inflorescences and flowers with some characteristics of B. scorzonerifolium. Some hybrid flowers showed yellow sepal, petal, or carpel, whose color was similar to the petal of B. scorzonerifolium; the others had silique of Arabidopsis with angularity of B. scorzonerifolium, and their parts possessed five stamens, the same as B. scorzonerifolium. Cytological analysis showed that three hybrids had Arabidopsis-like karyotypes. Random Amplified Polymorphic DNA (RAPD) and Simple Sequence Repeats (SSR) profiles revealed that both parental fragments were amplified from these hybrids. These results indicated chromatin introgression from B. scorzonerifolium to A. thaliana, which may be related to the complementation of hybrid inflorescence and flower generation.     

Different rates of chromosome elimination in symmetric and asymmetric somatic hybridization between <Emphasis Type="Italic">Festuca arundinacea</Emphasis> and <Emphasis Type="Italic">Bupleurum scorzonerifolium</Emphasis>

The protoplasts of tall fescue (Festuca arundinacea Schreb.) were fused with those of Bupleurum scorzonerifolium Willd. The latter were irradiated with UV at an intensity of 380 μW/cm² for 0 s (combination I), 30 s (combination II), and 60 s (combination III) before fusion. Putative hybrid calli, leaves, and shoots were generated from the fusion products. They were recognized as somatic hybrids by a combined analysis of chromosome numbers, isozyme, RAPD, and 5S rDNA spacer sequence. The hybrid calli with morphogenetic ability and leaves/shoots differentiation had the B. scorzonerifolium phenotype, whether they were derived from symmetric fusion (UV 0 s) or asymmetric fusion (UV 30 s/60 s). Cytological tests revealed that these hybrids contained the complete set (12) of B. scorzonerifolium chromosomes and 0–4 partner tall fescue chromosomes. The tall fescue chromosomes were rapidly eliminated in combinations II and III, but gradually lost in combination I. It was noted that the green leaves and shoots were produced earlier, and the differentiation frequency was higher in combinations II and III than in combination I, which corresponded to the speed of elimination of the tall fescue chromosomes in the hybrids. Therefore, UV irradiation can indirectly promote elimination of tall fescue chromosomes and hybrid differentiation. B. scorzonerifolium can repel partner chromosomes with mechanism that differs from UV.     

Inheritance and mapping of powdery mildew resistance gene <Emphasis Type="Italic">Pm43</Emphasis> introgressed from <Emphasis Type="Italic">Thinopyrum</Emphasis><Emphasis Type="Italic">intermedium</Emphasis> into wheat

Powdery mildew resistance from Thinopyrum intermedium was introgressed into common wheat (Triticum aestivum L.). Genetic analysis of the F₁, F₂, F₃ and BC₁ populations from powdery mildew resistant line CH5025 revealed that resistance was controlled by a single dominant allele. The gene responsible for powdery mildew resistance was mapped by the linkage analysis of a segregating F₂ population. The resistance gene was linked to five co-dominant genomic SSR markers (Xcfd233, Xwmc41, Xbarc11, Xgwm539 and Xwmc175) and their most likely order was Xcfd233–Xwmc41–Pm43–Xbarc11–Xgwm539–Xwmc175 at 2.6, 2.3, 4.2, 3.5 and 7.0 cM, respectively. Using the Chinese Spring nullisomic-tetrasomic and ditelosomic lines, the polymorphic markers and the resistance gene were assigned to chromosome 2DL. As no powdery mildew resistance gene was previously assigned to chromosome 2DL, this new resistance gene was designated Pm43. Pm43, together with the identified closely linked markers, could be useful in marker-assisted selection for pyramiding powdery mildew resistance genes. Runli He and Zhijian Chang contributed equally to this work.     

<Emphasis Type="Italic">Ty</Emphasis>1<Emphasis Type="Italic">/copia</Emphasis>- and <Emphasis Type="Italic">Ty</Emphasis>3<Emphasis Type="Italic">/gypsy</Emphasis>-like DNA sequences in <Emphasis Type="Italic">Helianthus </Emphasis>species

Two repeated DNA sequences isolated from a partial genomic DNA library of Helianthus annuus, p HaS13 and p HaS211, were shown to represent portions of the int gene of a Ty3 /gypsy retroelement and of the RNase-Hgene of a Ty1 /copia retroelement, respectively. Southern blotting patterns obtained by hybridizing the two probes to BglII- or DraI-digested genomic DNA from different Helianthus species showed p HaS13 and p HaS211 were parts of dispersed repeats at least 8 and 7 kb in length, respectively, that were conserved in all species studied. Comparable hybridization patterns were obtained in all species with p HaS13. By contrast, the patterns obtained by hybridizing p HaS211 clearly differentiated annual species from perennials. The frequencies of p HaS13- and p HaS211-related sequences in different species were 4.3x10(4)-1.3x10(5) copies and 9.9x10(2)-8.1x10(3) copies per picogram of DNA, respectively. The frequency of p HaS13-related sequences varied widely within annual species, while no significant difference was observed among perennial species. Conversely, the frequency variation of p HaS211-related sequences was as large within annual species as within perennials. Sequences of both families were found to be dispersed along the length of all chromosomes in all species studied. However, Ty3 /gypsy-like sequences were localized preferentially at the centromeric regions, whereas Ty1/ copia-like sequences were less represented or absent around the centromeres and plentiful at the chromosome ends. These findings suggest that the two sequence families played a role in Helianthusgenome evolution and species divergence, evolved independently in the same genomic backgrounds and in annual or perennial species, and acquired different possible functions in the host genomes.     

<Emphasis Type="Italic">CDPK</Emphasis> gene expression in somatic embryos of <Emphasis Type="Italic">Panax ginseng</Emphasis> expressing <Emphasis Type="Italic">rolC</Emphasis>

A somatic embryogenesis protocol for plant regeneration of northern red oak (Quercus rubra) was established from immature cotyledon explants. Embryogenic callus cultures were induced on Murashige and Skoog medium (MS) containing 3% sucrose, 0.24% Phytagel™, and various concentrations of 2,4-dichlorophenoxyacetic acid (2,4-d) after 4 weeks of culture in darkness. A higher response (66%) of embryogenic callus was induced on 0.45 μM 2,4-d. Higher numbers of globular- (31), heart- (17), torpedo- (12), and cotyledon-stage (8) embryos per explant were obtained by culturing embryogenic callus on MS with 3% sucrose, 0.24% Phytagel™, and devoid of growth regulators after 8 weeks culture in darkness. Continuous sub-culturing of embryogenic callus on medium containing 2,4-d yielded only compact callus. Desiccation of embryos for 3 days in darkness at 25 ± 2°C followed by cold storage at 4°C in darkness for 8 weeks favored embryo germination and development of plantlets. Cotyledon-stage embryos subjected to desiccation and chilling treatment cultured on MS with 3% sucrose, 0.24 Phytagel™, 0.44 μM 6-benzylaminopurine (BA), and 0.29 μM gibberellic acid germinated at a higher frequency (61%) than with 0.44 μM BA alone and control cultures. Germinated plantlets developed a shoot and root, were acclimatized successfully, and maintained in a growth room for plantlet development.     

<Emphasis Type="Italic">Agrobacterium</Emphasis><Emphasis Type="Italic">tumefaciens</Emphasis>-mediated transformation of callus cells of <Emphasis Type="Italic">Crataegus</Emphasis><Emphasis Type="Italic">aronia</Emphasis>

A genetic transformation system has been developed for callus cells of Crataegus aronia using Agrobacterium tumefaciens. Callus culture was established from internodal stem segments incubated on Murashige and Skoog (MS) medium supplemented with 5 mg l⁻¹ Indole-3-butyric acid (IBA) and 0.5 mg l⁻¹ 6-benzyladenine (BA). In order to optimize the callus culture system with respect to callus growth and coloration, different types and concentrations of plant growth regulators were tested. Results indicated that the best average fresh weight of red colored callus was obtained on MS medium supplemented with 2 mg l⁻¹ 2,4-dichlorophenoxyacetic acid (2,4-D) and 1.5 mg l⁻¹ kinetin (Kin) (callus maintenance medium). Callus cells were co-cultivated with Agrobacterium harboring the binary plasmid pCAMBIA1302 carrying the mgfp5 and hygromycin phosphotransferase (hptII) genes conferring green fluorescent protein (GFP) activity and hygromycin resistance, respectively. Putative transgenic calli were obtained 4 weeks after incubation of the co-cultivated explants onto maintenance medium supplemented with 50 mg l⁻¹ hygromycin. Molecular analysis confirmed the integration of the transgenes in transformed callus. To our knowledge, this is the first time to report an Agrobacterium-mediated transformation system in Crataegus aronia.     

Prevalence,intensity and associated factor analysis of <Emphasis Type="Italic">Tropilaelaps</Emphasis><Emphasis Type="Italic">mercedesae</Emphasis> infesting <Emphasis Type="Italic">Apis</Emphasis><Emphasis Type="Italic">mellifera</Emphasis> in China

Tropilaelaps mercedesae is a serious ectoparasite of Apis mellifera in China. The aim of this study was to investigate the infestation rates and intensity of T. mercedesae in A. mellifera in China, and to explore the relative importance of climate, district, management practices and beekeeper characteristics that are assumed to be associated with the intensity of T. mercedesae. Of the 410 participating apiaries, 379 apiaries were included in analyses of seasonal infestation rates and 352 apiaries were included in multivariable regression analysis. The highest infestation rate (86.3%) of T. mercedesae was encountered in autumn, followed by summer (66.5%), spring (17.2%) and winter (14.8%). In autumn, 28.9% (93) of the infested apiaries were in the north (including the northeast and northwest of China), 71.1% (229) were in the central and south (including east, southeast and southwest China), and 306 apiaries (82.9%) were co-infested by both T. mercedesae and Varroa. Multivariable regression analysis showed that geographical location, season, royal jelly collection and Varroa infestation were the factors that influence the intensity of T. mercedesae. The influence of beekeeper’s education, time of beekeeping, operation size, and hive migration on the intensity of T. mercedesa was not statistically significant. This study provided information about the establishment of the linkage of the environment and the parasite and could lead to better timing and methods of control.     

Revision of the <Emphasis Type="Italic">Serrulati</Emphasis> species of <Emphasis Type="Italic">Penstemon</Emphasis> section <Emphasis Type="Italic">Saccanthera</Emphasis> subsection <Emphasis Type="Italic">Serrulati</Emphasis>

A revision of Penstemon sect. Saccanthera subsect. Serrulati includes a new species (P. salmonensis), a new variety (P. triphyllus var. infernalis), and the elevation of a subspecies to species (P. curtiflorus), bringing the total number of species to eight, which are keyed and described, complete with nomenclature and type citations.     

Asymmetric somatic hybridization between UV-irradiated <Emphasis Type="Italic">Citrus unshiu</Emphasis> and <Emphasis Type="Italic">C</Emphasis>. <Emphasis Type="Italic">sinensis</Emphasis>: regeneration and characterization of hybrid shoots

In the present paper, attempts were made to explore the possibility of employing ultraviolet (UV) irradiation in citrus asymmetric fusion for transfer of limited amount of favorable traits from a desirable cultivar to a target one. Exposure of Satsuma mandarin (Citrus unshiu Marc.) embryogenic protoplasts to UV at an intensity of 300 μW cm⁻² led to reduced viability, especially under long irradiation duration. The protoplasts could not grow during culture when they were irradiated for over 30 s. Terminal deoxynucleotidyl transferase biotin-dUTP nick end labeling (TUNEL) assay revealed extensive DNA fragmentation in the UV-irradiated protoplasts compared with those without UV treatment. Electrofusion between UV-irradiated protoplasts of Satsuma mandarin (donor) with those of Jincheng (C. sinensis Osbeck, recipient), a local cultivar of superior quality, gave rise to regeneration of several lines of shoots, which failed to root despite enormous endeavors. Ploidy analysis via flow cytometry and chromosome counting showed that four selected shoots were either diploid, triploid or tetraploid. Random amplified polymorphism DNA (RAPD) and amplified fragment length polymorphism (AFLP) confirmed the shoots, irrespective of their ploidy level, as putative somatic hybrids. Cleaved amplified polymorphism sequences (CAPS) demonstrated that the shoots predominantly got their cytoplasmic components, in terms of chloroplast (cp) and mitochondrion DNA, from Jincheng, along with possible recombination of cpDNA in some shoot lines. The current data indicated that UV-based asymmetric fusion could also be employed in citrus somatic hybridization with the intention of creating novel germplasms, which may provide an alternative approach for cultivar improvement.     

<Emphasis Type="Italic">Galleria</Emphasis><Emphasis Type="Italic">mellonella</Emphasis> are Resistant to <Emphasis Type="Italic">Pneumocystis</Emphasis><Emphasis Type="Italic">murina</Emphasis> Infection

Studying Pneumocystis has proven to be a challenge from the perspective of propagating a significant amount of the pathogen in a facile manner. The study of several fungal pathogens has been aided by the use of invertebrate model hosts. Our efforts to infect the invertebrate larvae Galleria mellonella with Pneumocystis proved futile since P. murina neither caused disease nor was able to proliferate within G. mellonella. It did, however, show that the pathogen could be rapidly cleared from the host.     

<Emphasis Type="Italic">STAYGREEN</Emphasis> (<Emphasis Type="Italic">CsSGR</Emphasis>) is a candidate for the anthracnose (<Emphasis Type="Italic">Colletotrichum orbiculare</Emphasis>) resistance locus <Emphasis Type="Italic">cla</Emphasis> in Gy14 cucumber

Key message

Map-based cloning identified a candidate gene for resistance to the anthracnose fungal pathogen Colletotrichum orbiculare in cucumber, which reveals a novel function for the highly conserved STAYGREEN family genes for host disease resistance in plants.

Abstract

Colletotrichum orbiculare is a hemibiotrophic fungal pathogen that causes anthracnose disease in cucumber and other cucurbit crops. No host resistance genes against the anthracnose pathogens have been cloned in crop plants. Here, we reported fine mapping and cloning of a resistance gene to the race 1 anthracnose pathogen in cucumber inbred lines Gy14 and WI 2757. Phenotypic and QTL analysis in multiple populations revealed that a single recessive gene, cla, was underlying anthracnose resistance in both lines, but WI2757 carried an additional minor-effect QTL. Fine mapping using 150 Gy14?×?9930 recombinant inbred lines and 1043 F₂ individuals delimited the cla locus into a 32 kb region in cucumber Chromosome 5 with three predicted genes. Multiple lines of evidence suggested that the cucumber STAYGREEN (CsSGR) gene is a candidate for the anthracnose resistance locus. A single nucleotide mutation in the third exon of CsSGR resulted in the substitution of Glutamine in 9930 to Arginine in Gy14 in CsSGR protein which seems responsible for the differential anthracnose inoculation responses between Gy14 and 9930. Quantitative real-time PCR analysis indicated that CsSGR was significantly upregulated upon anthracnose pathogen inoculation in the susceptible 9930, while its expression was much lower in the resistant Gy14. Investigation of allelic diversities in natural cucumber populations revealed that the resistance allele in almost all improved cultivars or breeding lines of the U.S. origin was derived from PI 197087. This work reveals an unknown function for the highly conserved STAYGREEN (SGR) family genes for host disease resistance in plants.

     

Genetic mapping of a barley leaf rust resistance gene <Emphasis Type="Italic">Rph26</Emphasis> introgressed from <Emphasis Type="Italic">Hordeum bulbosum</Emphasis>

Key message

The quantitative barley leaf rust resistance gene, Rph26, was fine mapped within a H. bulbosum introgression on barley chromosome 1HL. This provides the tools for pyramiding with other resistance genes.

Abstract

A novel quantitative resistance gene, Rph26, effective against barley leaf rust (Puccinia hordei) was introgressed from Hordeum bulbosum into the barley (Hordeum vulgare) cultivar ‘Emir’. The effect of Rph26 was to reduce the observed symptoms of leaf rust infection (uredinium number and infection type). In addition, this resistance also increased the fungal latency period and reduced the fungal biomass within infected leaves. The resulting introgression line 200A12, containing Rph26, was backcrossed to its barley parental cultivar ‘Emir’ to create an F₂ population focused on detecting interspecific recombination within the introgressed segment. A total of 1368 individuals from this F₂ population were genotyped with flanking markers at either end of the 1HL introgression, resulting in the identification of 19 genotypes, which had undergone interspecific recombination within the original introgression. F₃ seeds that were homozygous for the introgressions of reduced size were selected from each F₂ recombinant and were used for subsequent genotyping and phenotyping. Rph26 was genetically mapped to the proximal end of the introgressed segment located at the distal end of chromosome 1HL. Molecular markers closely linked to Rph26 were identified and will enable this disease resistance gene to be combined with other sources of quantitative resistance to maximize the effectiveness and durability of leaf rust resistance in barley breeding. Heterozygous genotypes containing a single copy of Rph26 had an intermediate phenotype when compared with the homozygous resistant and susceptible genotypes, indicating an incompletely dominant inheritance.

     

Molecular mapping of the novel powdery mildew resistance gene <Emphasis Type="Italic">Pm36</Emphasis> introgressed from <Emphasis Type="Italic">Triticum turgidum</Emphasis> var. <Emphasis Type="Italic">dicoccoides</Emphasis> in durum wheat

Powdery mildew, caused by Blumeria graminis f.sp. tritici, is one of the most important wheat diseases in many regions of the world. Triticum turgidum var. dicoccoides (2n=4x=AABB), the progenitor of cultivated wheats, shows particular promises as a donor of useful genetic variation for several traits, including disease resistances. The wild emmer accession MG29896, resistant to powdery mildew, was backcrossed to the susceptible durum wheat cultivar Latino, and a set of backcross inbred lines (BC(5)F(5)) was produced. Genetic analysis of F(3) populations from two resistant introgression lines (5BIL-29 x Latino and 5BIL-42 x Latino) indicated that the powdery mildew resistance is controlled by a single dominant gene. Molecular markers and the bulked segregant analysis were used to characterize and map the powdery mildew resistance. Five AFLP markers (XP43M32((250)), XP46M31((410)), XP41M37((100)), XP41M39((250)), XP39M32((120))), three genomic SSR markers (Xcfd07, Xwmc75, Xgwm408) and one EST-derived SSR marker (BJ261635) were found to be linked to the resistance gene in 5BIL-29 and only the BJ261635 marker in 5BIL-42. By means of Chinese Spring nullisomic-tetrasomic, ditelosomic and deletion lines, the polymorphic markers and the resistance gene were assigned to chromosome bin 5BL6-0.29-0.76. These results indicated that the two lines had the same resistance gene and that the introgressed dicoccoides chromosome segment was longer (35.5 cM) in 5BIL-29 than that introgressed in 5BIL-42 (less than 1.5 cM). As no powdery mildew resistance gene has been reported on chromosome arm 5BL, the novel resistance gene derived from var. dicoccoides was designated Pm36. The 244 bp allele of BJ261635 in 5BIL-42 can be used for marker-assisted selection during the wheat resistance breeding process for facilitating gene pyramiding.     

Phosphinothricin-resistant <Emphasis Type="Italic">Brassica napus</Emphasis> + <Emphasis Type="Italic">Orychophragmus violaceus</Emphasis> somatic hybrids

Hybrid plants resistant to phosphinothricin (PPT) are obtained as a result of experiments with somatic hybridization between Brassica napus L. cv. Kalinins’kyy and Orychophragmus violaceus L. O.E. Shulz. The hybrids inherited PPT resistance from O. violaceus plants that had been previously transformed by a vector containing the maize transposon system Spm/dSPm with bar gene located within the nonautonomous transposon. The morphologically obtained plants occupy an intermediate position between the initial forms, which is in agreement with the results of isoenzyme analyses (analysis of multiple forms of amylase and esterase) and PCR analysis (presence of the genes bar, gus, and SpmTPase). Inheritance of the plastome occurs from oilseed rape, while that of the mitochondrion, from O. violaceus, which is proved by means of PCR-RFLP analysis. The plant hybrids may be utilized for further selection research with oilseed rape following determination of the edible quality of its oil as well as in experiments with chloroplast transformation, a topic which is of critical importance for oilseed rape.     

The <Emphasis Type="Italic">Caenorhabditis</Emphasis><Emphasis Type="Italic">briggsae</Emphasis> genome contains active <Emphasis Type="Italic">CbmaT1</Emphasis> and <Emphasis Type="Italic">Tcb1</Emphasis> transposons

The maT clade of transposons is a group of transposable elements intermediate in sequence and predicted protein structure to mariner and Tc transposons, with a distribution thus far limited to a few invertebrate species. We present evidence, based on searches of publicly available databases, that the nematode Caenorhabditis briggsae has several maT-like transposons, which we have designated as CbmaT elements, dispersed throughout its genome. We also describe two additional transposon sequences that probably share their evolutionary history with the CbmaT transposons. One resembles a fold back variant of a CbmaT element, with long (380-bp) inverted terminal repeats (ITRs) that show a high degree (71%) of identity to CbmaT1. The other, which shares only the 26-bp ITR sequences with one of the CbmaT variants, is present in eight nearly identical copies, but does not have a transposase gene and may therefore be cross mobilised by a CbmaT transposase. Using PCR-based mobility assays, we show that CbmaT1 transposons are capable of excising from the C. briggsae genome. CbmaT1 excised approximately 500 times less frequently than Tcb1 in the reference strain AF16, but both CbmaT1 and Tcb1 excised at extremely high frequencies in the HK105 strain. The HK105 strain also exhibited a high frequency of spontaneous induction of unc-22 mutants, suggesting that it may be a mutator strain of C. briggsae.     

Protoplast isolation and culture for somatic hybridization of <Emphasis Type="Italic">Lupinus angustifolius</Emphasis> and <Emphasis Type="Italic">L</Emphasis>. <Emphasis Type="Italic">subcarnosus</Emphasis>

A method for isolation and shoot regeneration from electrofused protoplasts of L. angustifolius and L. subcarnosus was developed. Viable protoplasts were isolated from leaves of in-vitro grown seedlings at an average yield of 6 × 10⁵ protoplasts g⁻¹ fresh weight. Liquid and agarose solidified B5 media were used for protoplast culture. In the liquid-culture system, all tested media, VKM, P1 and KM8p, were applicable for inducing cell division (84% of all tested petri dishes at four weeks) and colony formation. Media containing additional carbohydrates were suitable to produce compact calli with green and brown pigmentations in different combinations. Analysis of callus with molecular markers allowed to identify six somatic hybrids. However, none of the parental-protoplast derived cell colonies could develop shoots. This is the first report on protoplast fusion of L. angustifolius and L. subcarnosus with subsequent shoot regeneration.     

Phylogenetic analyses of <Emphasis Type="Italic">Uromyces viciae-fabae</Emphasis> and its varieties on <Emphasis Type="Italic">Vicia</Emphasis>, <Emphasis Type="Italic">Lathyrus</Emphasis>, and <Emphasis Type="Italic">Pisum</Emphasis> in Japan

A pea rust fungus, Uromyces viciae-fabae, has been classified into two varieties, var. viciae-fabae and var. orobi, based on differences in urediniospore wall thickness and putative host specificity in Japan. In principal component analyses, morphological features of urediniospores and teliospores of 94 rust specimens from Vicia, Lathyrus, and Pisum did not show definite host-specific morphological groups. In molecular analyses, 23 Uromyces specimens from Vicia, Lathyrus, and Pisum formed a single genetic clade based on D1/D2 and ITS regions. Four isolates of U. viciae-fabae from V. cracca and V. unijuga could infect and sporulate on P. sativum. These results suggest that U. viciae-fabae populations on different host plants are not biologically differentiated into groups that can be recognized as varieties.Contribution no. 184, Laboratory of Plant Parasitic Mycology, Institute of Agriculture and Forestry, University of Tsukuba, Japan     

Characterization of directly transformed weedy <Emphasis Type="Italic">Brassica rapa</Emphasis> and introgressed <Emphasis Type="Italic">B. rapa</Emphasis> with Bt <Emphasis Type="Italic">cry1Ac</Emphasis> and <Emphasis Type="Italic">gfp</Emphasis> genes

Crop to weed transgene flow, which could result in more competitive weed populations, is an agricultural biosafety concern. Crop Brassica napus to weedy Brassica rapa hybridization has been extensively characterized to better understand the transgene flow and its consequences. In this study, weedy accessions of B. rapa were transformed with Bacillus thuringiensis (Bt) cry1Ac- and green fluorescence protein (gfp)-coding transgenes using Agrobacterium to assess ecological performance of the wild biotype relative to introgressed hybrids in which the transgenic parent was the crop. Regenerated transgenic B. rapa events were characterized by progeny analysis, Bt protein enzyme-linked immunosorbent assay (ELISA), Southern blot analysis, and GFP expression assay. GFP expression level and Bt protein concentration were significantly different between independent transgenic B. rapa events. Similar reproductive productivity was observed in comparison between transgenic B. rapa events and B. rapa × B. napus introgressed hybrids in greenhouse and field experiments. In the greenhouse, Bt transgenic plants experienced significantly less herbivory damage from the diamondback moth (Plutella xylostella). No differences were found in the field experiment under ambient, low, herbivore pressure. Directly transformed transgenic B. rapa plants should be a helpful experimental control to better understand crop genetic load in introgressed transgenic weeds.     

In planta transformation of <Emphasis Type="Italic">Notocactus scopa</Emphasis> cv. <Emphasis Type="Italic">Soonjung</Emphasis> by <Emphasis Type="Italic">Agrobacterium </Emphasis><Emphasis Type="Italic">tumefaciens</Emphasis>

Notocactus scopa cv. Soonjung was subjected to in planta Agrobacterium tumefaciens-mediated transformation with vacuum infiltration, pin-pricking, and a combination of the two methods. The pin-pricking combined with vacuum infiltration (20-30 cmHg for 15 min) resulted in a transformation efficiency of 67-100%, and the expression of the uidA and nptII genes was detected in transformed cactus. The established in planta transformation technique generated a transgenic cactus with higher transformation efficiency, shortened selection process, and stable gene expression via asexual reproduction. All of the results showed that the in planta transformation method utilized in the current study provided an efficient and time-saving procedure for the delivery of genes into the cactus genome, and that this technique can be applied to other asexually reproducing succulent plant species.