Use of erythrocyte diagnostic agents for the determination of integrative association constants]

The authors described a method of determination of integrative association constant differing from intrinsic association constant by the value of the valency of macromolecular antigen. The method is based on the using of erythrocytes on whose surface one of the components is fixed, whereas the other is in free state. Application of equations was demonstratedon a number of examples with determination of integrative association constant. The data obtained permitted to assess qualitative peculiarities of the antigenic and antibody erythrocytic diagnostic agents.     

Stereochemical analysis of the reaction catalyzed by human protein geranylgeranyl transferase

Protein geranylgeranyltransferase type I (PGGTase-I) catalyzes the nucleophilic substitution reaction between the C(20) geranylgeranyl diphosphate (GGPP) and a protein-derived thiol to form a thioether linkage. Here, we describe the stereochemical outcome, at the isoprenoid C1, of the reaction catalyzed by human PGGTase-I. To accomplish this, the pentapeptide N-dansyl-GCVLL was first enzymatically prenylated by human PGGTase-I with either (S)-[1-(2)H]farnesyl diphosphate or (S)-[1-(2)H]GGPP. The prenylated products were then degraded to dipeptides using carboxypeptidase Y. After HPLC purification, the prenylated dipeptide products were analyzed by (1)H NMR spectroscopy. The final spectra were compared with the spectra from the same product obtained via chemical synthesis to deduce the stereochemistry of the PGGTase-I-catalyzed reaction. This comparison showed that the reaction proceeds with inversion of configuration with no detectable (< 6%) racemization. These results are more consistent with an associative-type mechanism, but they cannot be used to rule out a dissociative mechanism involving a rigid, solvent-sequestered, tight ion pair.     

Kinetic isotope effect analysis of the ribosomal peptidyl transferase reaction

The ribosome is the macromolecular machine responsible for protein synthesis in all cells. Here, we establish a kinetic framework for the 50S modified fragment reaction that makes it possible to measure the kinetic effects that result from isotopic substitution in either the A or P site of the ribosome. This simplified peptidyl transferase assay follows a rapid equilibrium random mechanism in which the reverse reaction is nonexistent and the forward commitment is negligible. A normal effect (1.009) is observed for (15)N substitution of the incoming nucleophile at both low and high pH. This suggests that the first irreversible step is the formation of the tetrahedral intermediate. The observation of a normal isotope effect that does not change as a function of pH suggests that the ribosome promotes peptide bond formation by a mechanism that differs in its details from an uncatalyzed aminolysis reaction in solution. This implies that the ribosome contributes chemically to catalysis of peptide bond formation.     

N-Chloroacyl-6-O-triphenylmethylchitosans: useful intermediates for synthetic modifications of chitosan

An efficient synthetic route was developed for the mild chloroacylation of chitosan with different chloroacyl chlorides. Full N-chloroacylation was obtained with this procedure without any O-acylation, and products having lower degrees of substitution can also be produced. Organo-soluble 6-O-triphenylmethylchitosan was used as a starting material for the acylation reactions. The resulting N-chloroacyl-6-O-triphenylmethylchitosan intermediates were also organo-soluble and characterized by FT-IR. N-Methylpiperazine moieties were attached to make end products that were sufficiently soluble for characterization by NMR and also to prove that the present intermediates could be used for further modifications. The end products were fully characterized by 1H NMR, 13C NMR, and 2D 1H-13C heteronuclear single-quantum correlation NMR spectroscopy. The degrees of substitution were determined by 1H NMR. Molecular weight determination by GPC-LS displayed a significant degradation of the polymer. The weight-average molar masses (M(w)) of the end products ranged from 29.6 to 49.4 kDa, when the M(w) of the starting material was 144.2 kDa.     

The Participation of Speract in the Acrosome Reaction of Hemicentrotus pulcherrimus

A speract-free macromolecular fraction was prepared from the egg jelly of the sea urchin Hemicentrotus pulcherrimus by gel filtration and tested for ability to induce the acrosome reaction in H. pulcherrimus spermatozoa with or without exogenously added synthetic speract. The macromolecular fraction without speract showed only about half the activity of the original unfractionated jelly for induction of the acrosome reaction. The rates of the acrosome reaction induced by the fraction with speract were comparable with those induced by the unfractionated jelly at all pHs tested. Speract itself, however, did not induce the acrosome reaction in the absence of the macromolecular fraction of jelly. The acrosome reaction was associated with incerase of the cyclic AMP concentration in sperm cells, the extent of incerase depending on the concentration of the macromolecular fraction. Addition of speract to the fraction enhanced both induction of the acrosome reaction and increase in the cyclic AMP concentration induced by the fraction. These results suggest that a major factor(s) responsible for the acrosome reaction is a macromolecular component(s) of the jelly and that speract promotes the reaction as a co-factor.     

The Supposed Role of Microbiological Aerosol Stabilizers as Substitutes for Bound Water: A Study of an In Vitro Model System

In order to test a suggestion that inositol may take the place of water in maintaining the stability of desiccated cells, the reversible endothermic association of tobacco mosaic virus protein (TMVP) was studied turbidimetrically in presence of this substance. Its effect was to lower the temperature at which association takes place, the positive standard enthalpy and standard entropy of reaction both being increased by about 30%. The hypothesis of direct substitution of bound water by inositol at the site of macromolecular association leads to the contrary prediction that the association temperature would be raised. It is suggested that the observed effect of inositol may result from a conformation change in TMVP brought about by binding of inositol at positions adjacent to the site of reaction.     

Effects of free and macromolecular-bound TXA2 receptor antagonist BM 1..505 on U46619-induced platelet aggregation

The goal of this study was to synthesize a macromolecular probe of the TXA₂ receptor antagonist BM13.505 which is unable to penetrate the platelet membrane for localization and characterization of the TXA₂ receptor. The active NHS-ester of BM13.505 was synthesized and purified. It was used for covalent coupling of BM13.505 to bovine serum albumin, a macromolecular carrier. Inhibitory effects of free and macromolecular bound BM13.505 on aggregatory properties of U46619-stimulated platelets were measured and compared to TXA₂ generation in platelets, as determined by TXB₂ radioimmuno assay. No inhibitory effects of free and macromolecular-bound BM13.505 on ADP- or thrombin-induced platelet aggregation were observed. Equimolar concentrations of free or macromolecular bound BM13.505 inhibited U46619-induced platelet aggregation and TXA₂ generation with equal potency. IC₅₀-values for platelet aggregation inhibition by free and macromolecular bound BM13.505 were 64 nM and 96 nM respectively. It appears that the TXA₂ receptor ligand binding site is located close to the outer membrane surface of platelets. Interaction of macromolecular bound BM13.505 with the platelet thromboxane receptor does not depend on the availability of the free carboxyl residue in BM13.505. The method for coupling a TXA₂ receptor antagonist to a macromolecule will aid in constructing probes for the localization and characterization of the TXA₂ receptor.     

Regioselective substitution of 6,7-dichloroquinoline-5,8-dione: synthesis and X-ray crystal structure of 4a,10,11-triazabenzo[3,2-a]fluorene-5,6-diones

6,7-Dichloroquinoline-5,8-dione (1) was reacted with a number of 2-aminopyridine derivatives. Of the several possible products of this reaction, 4a,10,11-triazabenzo[3,2-a]fluorene-5,6-dione (6), produced by condensation and rearrangement, was obtained as the major product, and its structure was subsequently unambigously determined by X-ray crystallographic study. Ortho-quinones were produced via nucleophilic substitution at position C7, which was unexpected, considering that para-quinones were produced via C6 substitution in the reaction between compound 1 and ethyl acetoacetate in our previous work. Such unexpected nucleophilic substitution at C7 provides an effective, yet simple route, to the preparation of biologically active ortho-quinone derivatives.     

Studies on the cationization of agarose

Cationized agaroses with different degrees of substitution (0.04–0.77) were synthesized, employing 3-chloro-2-hydroxypropyltrimethylammonium chloride (CHPTAC). The influence of different reaction parameters on the substitution degree and molecular weight was evaluated. The investigated parameters were concentration of reagents, temperature, time, and addition of NaBH₄. The products were characterized by means of scanning electronic microscopy, infrared spectroscopy, viscosimetry, and NMR spectroscopy. Methanolysis products were studied by electrospray ionization mass spectrometry. The higher the concentration of CHPTAC employed, a higher degree of substitution was obtained, if the optimum concentration of NaOH in each case was employed. Insufficient quantities of NaOH reduced epoxide formation and the reacting alkoxides of the polysaccharide, whereas an excess of NaOH favored degradation of the epoxide and decrease in the molecular weight of the product. A reaction time of 2 h was sufficient to obtain products with the maximum degree of substitution for each case. The addition of NaBH₄ gave products with a slightly higher molecular weight, but the extra cost involved should not justify its use for large-scale application.     

Novel thermosensitive 5-fluorouracil-cyclotriphosphazene conjugates: synthesis, thermosensitivity, degradability, and in vitro antitumor activity

A novel thermosensitive macromolecular prodrug of 5-fluorouracil (5-FU) was synthesized using cyclotriphosphazene, and its thermosensitivity, degradability, and in vitro antitumor activity were studied. A series of alpha-substituted glycine derivatives of 5-FU containing carboxylic groups were prepared, and cyclotriphosphazenes with amino groups were synthesized via the stepwise substitution of hexachlorocyclotriphosphazene (NPCl(2))(3) with methoxy-poly(ethylene glycol) (MPEG) or alkoxy ethylene oxide and lysine ethyl ester (LysOEt). The coupling reaction of the two derivatives, and their subsequent deprotection, yielded a thermosenstive 5-FU-cyclotriphosphazene conjugate, which exhibited a unique octopus-shaped molecular structure, in which the three hydrophilic PEG groups (or alkoxy ethylene oxides) were oriented in one direction, opposing the other three hydrophobic groups containing 5-FU, with respect to the trimer ring plane. This conjugate exhibited a reversible and thermosensitive phase transition in an aqueous medium, from soluble to insoluble states. The lower critical solution temperature (LCST) of the conjugate was controlled by substitution with different hydrophilic/hydrophobic side groups, and a few of the conjugates displayed LCSTs which were just below body temperature. This, of course, implies possible applications for local drug delivery by direct intratumoral injection. The conjugate exhibited gradual degradation at 37 degrees C in both neutral and acidic buffer solutions, and high temperature significantly facilitated its hydrolytic degradation. All of the conjugates displayed dose-dependent cytotoxicity against the leukemia L1210 cell line and exhibited more pronounced cytotoxic effects than did 5-FU.     

The in vitro conversion of chorismate to isochorismate catalyzed by the Escherichia coli entC gene product. Evidence that EntA does not contribute to isochorismate synthase activity

The entC and entA genes, coding for the enzymes isochorismate synthase and 2,3-dihydro-2,3-dihydroxybenzoate dehydrogenase, respectively, were subcloned behind the T7 promoter in the expression plasmid pGEM3Z. Their protein products were overproduced and partially purified for in vitro analysis of the conversion of chorismate to isochorismate. Whereas previous genetic experiments suggested that the EntA enzyme has a role in this conversion, this study clearly indicates that EntC alone catalyzes the reaction. Addition of EntA had no effect on isochorismate synthase activity. As a result, the mutation (previously designated entC401) in strain AN191 was characterized by nucleotide sequence analysis. The lesion is a single base substitution in the entA gene, resulting in a glutamic acid-for-glycine substitution at the penultimate amino acid (residue 247) of the EntA enzyme. The mutant protein was partially purified and shown to be devoid of 2,3-dihydro-2,3-dihydroxybenzoate dehydrogenase activity, whereas the entC gene product from strain AN191 exhibited normal isochorismate synthase function. These results conflict with the earlier characterization of the entC401 mutation in a different genetic background. The data presented herein establish that the EntA protein does not contribute to isochorismate synthase activity and that the mutant strain that led to this suggestion harbors a defective allele of entA rather than entC.     

Biophysical characterization of a riboflavin-conjugated dendrimer platform for targeted drug delivery

The present study describes the biophysical characterization of generation-five poly(amidoamine) (PAMAM) dendrimers conjugated with riboflavin (RF) as a cancer-targeting platform. Two new series of dendrimers were designed, each presenting the riboflavin ligand attached at a different site (isoalloxazine at N-3 and d-ribose at N-10) and at varying ligand valency. Isothermal titration calorimetry (ITC) and differential scanning calorimetry (DSC) were used to determine the binding activity for riboflavin binding protein (RfBP) in a cell-free solution. The ITC data shows dendrimer conjugates have K(D) values of ≥ 465 nM on a riboflavin basis, an affinity ~93-fold lower than that of free riboflavin. The N-3 series showed greater binding affinity in comparison with the N-10 series. Notably, the affinity is inversely correlated with ligand valency. These findings are also corroborated by DSC, where greater protein-conjugate stability is achieved with the N-3 series and at lower ligand valency.     

Intrinsically antibacterial materials based on polymeric derivatives of eugenol for biomedical applications

Infections are the most common cause of biomaterial implant failure representing a constant challenge to the more widespread application of medical implants. This study reports on the preparation and characterization of novel hydrophilic copolymeric systems provided with antibacterial properties coming from eugenol residues anchored to the macromolecular chains. Thus, high conversion copolymers were prepared from the hydrophilic monomer 2-hydroxyethyl methacrylate (HEMA) and different eugenol monomeric derivatives, eugenyl methacrylate (EgMA) and ethoxyeugenyl methacrylate (EEgMA), by bulk polymerization reaction. Thermal evaluation revealed glass transition temperature values in the range 95-58 degrees C following the order HEMA-co-EgMA > PHEMA > HEMA-co-EEgMA and a clear increase in thermal stability with the presence of any eugenyl monomer in the system. In vitro wettability studies showed a reduction of water sorption capacity and surface free energy values with increasing the content of eugenol residues in the copolymer. The antimicrobial activity of copolymeric discs was evaluated by determining their capacity to reduce or inhibit colony formation by different bacterial species. All eugenyl containing materials showed bacteria growth inhibition, this one being higher for the EEgMA derivative copolymers.     

CHEMICAL AND PHYSICAL BEHAVIOR OF CASEIN SOLUTIONS

The experiments on casein solutions therefore confirm the conclusion at which we arrived from the behavior of gelatin and crystalline egg albumin that the forces determining the combination between proteins and acids or alkalies are the same forces of primary valency which also determine the reaction between acids and alkalies with crystalloids, and that the valency and not the nature of the ion in combination with a protein determines the effect on the physical properties of the protein.     

The mechanism investigation in substitution of 21-bromo-3alpha-hydroxyl-3beta-methoxymethyl-5alpha-pregnan-20-one with nucleophiles

A mechanistic study on the nucleophilic substitution of a strictly geometric 21-bromo-3alpha-hydroxyl-3beta-methoxymethyl-5alpha-pregnan-20-one was described. Reaction of the alpha-bromoketone with excess lithium imidazole followed by the addition of extra bases including n-butyllithium, methyllithium, lithium piperidine, and lithium pyrrolidine provided unexpected alpha-nucleophilic carbonyl adducts that derived from strong base. Data from HPLC and proton NMR suggested an epoxide as the intermediate. Two possible reaction pathways were proposed for the nucleophilic substitution reaction. One pathway is the normal SN2 substitution reaction, directly provided the imidazoly product without the formation of the unexpected alpha-substituted products. The other pathway went through an epoxide intermediate, in which imidazole anion or the strong bases added would attack from the less hindered site of the epoxide to give the substitution product.     

Substrate specificity for the 12beta-hydroxylation of bufadienolides by Alternaria alternata

Hydroxylation is an important route to synthesize more hydrophilic compounds of pharmaceutical significance. Microbial hydroxylation offers advantages over chemical means for its high specificity. In this study, a fungal strain Alternaria alternata AS 3.4578 was found to be able to catalyze the specific 12beta-hydroxylation of a variety of cytotoxic bufadienolides. Cinobufagin and resibufogenin could be completely metabolized by A. alternata to generate their 12beta-hydroxylated products in high yields (>90%) within 8 h of incubation. A. alternata could also convert 3-epi-desacetylcinobufagin into 3-epi-12beta-hydroxyl desacetylcinobufagin as the major product (70% yield). C-3 dehydrogenated products were detected in these reactions in fair yields, while their accumulation was relatively slow. The 12beta-hydroxylation of bufadienolides could be significantly inhibited by the substitution of 1beta-, 5-, or 16alpha-hydroxyl groups, and the 14beta,15beta-epoxy ring appeared to be a necessary structural requirement for the specificity. For the biotransformation of bufalin, a 14beta-OH bufadienolide, this reaction was not specific, and accompanied by 7beta-hydroxylation as a parallel and competing metabolic route. The biotransformation products were identified by comparison with authentic samples or tentatively characterized by high-performance liquid chromatography-diode array detection-atmospheric pressure chemical ionization-mass spectrometry analyses.     

Cellulose acetates from linters and sisal: correlation between synthesis conditions in DMAc/LiCl and product properties

We report the acetylation of celluloses from sisal (untreated and alkali treated) and cotton linters (alkali treated), under homogeneous solution conditions, using DMAc/LiCl as solvent system. Our target was to evaluate the effects of cellulose dissolution and reactions conditions on the product properties. The products were characterized in terms of degree of substitution (DS) by 1H NMR, and molar weight distribution (MWD) by size exclusion chromatography. Changes in the DS of the products were correlated with reaction conditions and solution properties. It was found that the dissolution of celluloses and degree of substitution of cellulose derivatives depends on a fine adjustment of the dissolution/derivatization conditions, as well as on the origin (sisal or linters) of celluloses.     

A multi-bioreactor system for optimal production of malaria vaccines with Pichia pastoris

The successful development of optimal multistage production processes for recombinant products with Pichia pastoris needs to meet three pre-conditions. These pre-conditions are (i) strategies for performing fully automated and observable processes, (ii) characterization of the host cell-specific reaction parameters in order to make an adapted process layout for feeding and aeration strategies, and (iii) knowledge of optimal operation parameter conditions for maximizing the expression productivity of target protein amount and/or quality. In this report, an approach of a fully automated multi-bioreactor plant is described that meets all these requirements. The expression and secretion of a potential malaria vaccine with Pichia pastoris was chosen as an example to demonstrate the quality of the bioreactor system. Methods for the simultaneous identification of reaction kinetics were developed for strain characterization. Process optimization was carried out by applying a sequential/parallel Design of Experiments. In the view of Process Analytical Technology (PAT)-applications and in order to develop fully automated and globally observable production processes, methods for quasi on-line monitoring of recombinant protein secretion titers and the immunological quality of the products are also discussed in detail.